• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1/*
2 * Copyright 2012 Freescale Semiconductor, Inc.
3 *
4 * The code contained herein is licensed under the GNU General Public
5 * License. You may obtain a copy of the GNU General Public License
6 * Version 2 or later at the following locations:
7 *
8 * http://www.opensource.org/licenses/gpl-license.html
9 * http://www.gnu.org/copyleft/gpl.html
10 */
11
12#include <dt-bindings/gpio/gpio.h>
13#include "skeleton.dtsi"
14#include "imx28-pinfunc.h"
15
16/ {
17	interrupt-parent = <&icoll>;
18
19	aliases {
20		ethernet0 = &mac0;
21		ethernet1 = &mac1;
22		gpio0 = &gpio0;
23		gpio1 = &gpio1;
24		gpio2 = &gpio2;
25		gpio3 = &gpio3;
26		gpio4 = &gpio4;
27		saif0 = &saif0;
28		saif1 = &saif1;
29		serial0 = &auart0;
30		serial1 = &auart1;
31		serial2 = &auart2;
32		serial3 = &auart3;
33		serial4 = &auart4;
34		spi0 = &ssp1;
35		spi1 = &ssp2;
36		usbphy0 = &usbphy0;
37		usbphy1 = &usbphy1;
38	};
39
40	cpus {
41		#address-cells = <0>;
42		#size-cells = <0>;
43
44		cpu {
45			compatible = "arm,arm926ej-s";
46			device_type = "cpu";
47		};
48	};
49
50	apb@80000000 {
51		compatible = "simple-bus";
52		#address-cells = <1>;
53		#size-cells = <1>;
54		reg = <0x80000000 0x80000>;
55		ranges;
56
57		apbh@80000000 {
58			compatible = "simple-bus";
59			#address-cells = <1>;
60			#size-cells = <1>;
61			reg = <0x80000000 0x3c900>;
62			ranges;
63
64			icoll: interrupt-controller@80000000 {
65				compatible = "fsl,imx28-icoll", "fsl,icoll";
66				interrupt-controller;
67				#interrupt-cells = <1>;
68				reg = <0x80000000 0x2000>;
69			};
70
71			hsadc: hsadc@80002000 {
72				reg = <0x80002000 0x2000>;
73				interrupts = <13>;
74				dmas = <&dma_apbh 12>;
75				dma-names = "rx";
76				status = "disabled";
77			};
78
79			dma_apbh: dma-apbh@80004000 {
80				compatible = "fsl,imx28-dma-apbh";
81				reg = <0x80004000 0x2000>;
82				interrupts = <82 83 84 85
83					      88 88 88 88
84					      88 88 88 88
85					      87 86 0 0>;
86				interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
87						  "gpmi0", "gmpi1", "gpmi2", "gmpi3",
88						  "gpmi4", "gmpi5", "gpmi6", "gmpi7",
89						  "hsadc", "lcdif", "empty", "empty";
90				#dma-cells = <1>;
91				dma-channels = <16>;
92				clocks = <&clks 25>;
93			};
94
95			perfmon: perfmon@80006000 {
96				reg = <0x80006000 0x800>;
97				interrupts = <27>;
98				status = "disabled";
99			};
100
101			gpmi: gpmi-nand@8000c000 {
102				compatible = "fsl,imx28-gpmi-nand";
103				#address-cells = <1>;
104				#size-cells = <1>;
105				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
106				reg-names = "gpmi-nand", "bch";
107				interrupts = <41>;
108				interrupt-names = "bch";
109				clocks = <&clks 50>;
110				clock-names = "gpmi_io";
111				dmas = <&dma_apbh 4>;
112				dma-names = "rx-tx";
113				status = "disabled";
114			};
115
116			ssp0: ssp@80010000 {
117				#address-cells = <1>;
118				#size-cells = <0>;
119				reg = <0x80010000 0x2000>;
120				interrupts = <96>;
121				clocks = <&clks 46>;
122				dmas = <&dma_apbh 0>;
123				dma-names = "rx-tx";
124				status = "disabled";
125			};
126
127			ssp1: ssp@80012000 {
128				#address-cells = <1>;
129				#size-cells = <0>;
130				reg = <0x80012000 0x2000>;
131				interrupts = <97>;
132				clocks = <&clks 47>;
133				dmas = <&dma_apbh 1>;
134				dma-names = "rx-tx";
135				status = "disabled";
136			};
137
138			ssp2: ssp@80014000 {
139				#address-cells = <1>;
140				#size-cells = <0>;
141				reg = <0x80014000 0x2000>;
142				interrupts = <98>;
143				clocks = <&clks 48>;
144				dmas = <&dma_apbh 2>;
145				dma-names = "rx-tx";
146				status = "disabled";
147			};
148
149			ssp3: ssp@80016000 {
150				#address-cells = <1>;
151				#size-cells = <0>;
152				reg = <0x80016000 0x2000>;
153				interrupts = <99>;
154				clocks = <&clks 49>;
155				dmas = <&dma_apbh 3>;
156				dma-names = "rx-tx";
157				status = "disabled";
158			};
159
160			pinctrl: pinctrl@80018000 {
161				#address-cells = <1>;
162				#size-cells = <0>;
163				compatible = "fsl,imx28-pinctrl", "simple-bus";
164				reg = <0x80018000 0x2000>;
165
166				gpio0: gpio@0 {
167					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
168					interrupts = <127>;
169					gpio-controller;
170					#gpio-cells = <2>;
171					interrupt-controller;
172					#interrupt-cells = <2>;
173				};
174
175				gpio1: gpio@1 {
176					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
177					interrupts = <126>;
178					gpio-controller;
179					#gpio-cells = <2>;
180					interrupt-controller;
181					#interrupt-cells = <2>;
182				};
183
184				gpio2: gpio@2 {
185					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
186					interrupts = <125>;
187					gpio-controller;
188					#gpio-cells = <2>;
189					interrupt-controller;
190					#interrupt-cells = <2>;
191				};
192
193				gpio3: gpio@3 {
194					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
195					interrupts = <124>;
196					gpio-controller;
197					#gpio-cells = <2>;
198					interrupt-controller;
199					#interrupt-cells = <2>;
200				};
201
202				gpio4: gpio@4 {
203					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
204					interrupts = <123>;
205					gpio-controller;
206					#gpio-cells = <2>;
207					interrupt-controller;
208					#interrupt-cells = <2>;
209				};
210
211				duart_pins_a: duart@0 {
212					reg = <0>;
213					fsl,pinmux-ids = <
214						MX28_PAD_PWM0__DUART_RX
215						MX28_PAD_PWM1__DUART_TX
216					>;
217					fsl,drive-strength = <MXS_DRIVE_4mA>;
218					fsl,voltage = <MXS_VOLTAGE_HIGH>;
219					fsl,pull-up = <MXS_PULL_DISABLE>;
220				};
221
222				duart_pins_b: duart@1 {
223					reg = <1>;
224					fsl,pinmux-ids = <
225						MX28_PAD_AUART0_CTS__DUART_RX
226						MX28_PAD_AUART0_RTS__DUART_TX
227					>;
228					fsl,drive-strength = <MXS_DRIVE_4mA>;
229					fsl,voltage = <MXS_VOLTAGE_HIGH>;
230					fsl,pull-up = <MXS_PULL_DISABLE>;
231				};
232
233				duart_4pins_a: duart-4pins@0 {
234					reg = <0>;
235					fsl,pinmux-ids = <
236						MX28_PAD_AUART0_CTS__DUART_RX
237						MX28_PAD_AUART0_RTS__DUART_TX
238						MX28_PAD_AUART0_RX__DUART_CTS
239						MX28_PAD_AUART0_TX__DUART_RTS
240					>;
241					fsl,drive-strength = <MXS_DRIVE_4mA>;
242					fsl,voltage = <MXS_VOLTAGE_HIGH>;
243					fsl,pull-up = <MXS_PULL_DISABLE>;
244				};
245
246				gpmi_pins_a: gpmi-nand@0 {
247					reg = <0>;
248					fsl,pinmux-ids = <
249						MX28_PAD_GPMI_D00__GPMI_D0
250						MX28_PAD_GPMI_D01__GPMI_D1
251						MX28_PAD_GPMI_D02__GPMI_D2
252						MX28_PAD_GPMI_D03__GPMI_D3
253						MX28_PAD_GPMI_D04__GPMI_D4
254						MX28_PAD_GPMI_D05__GPMI_D5
255						MX28_PAD_GPMI_D06__GPMI_D6
256						MX28_PAD_GPMI_D07__GPMI_D7
257						MX28_PAD_GPMI_CE0N__GPMI_CE0N
258						MX28_PAD_GPMI_RDY0__GPMI_READY0
259						MX28_PAD_GPMI_RDN__GPMI_RDN
260						MX28_PAD_GPMI_WRN__GPMI_WRN
261						MX28_PAD_GPMI_ALE__GPMI_ALE
262						MX28_PAD_GPMI_CLE__GPMI_CLE
263						MX28_PAD_GPMI_RESETN__GPMI_RESETN
264					>;
265					fsl,drive-strength = <MXS_DRIVE_4mA>;
266					fsl,voltage = <MXS_VOLTAGE_HIGH>;
267					fsl,pull-up = <MXS_PULL_DISABLE>;
268				};
269
270				gpmi_status_cfg: gpmi-status-cfg {
271					fsl,pinmux-ids = <
272						MX28_PAD_GPMI_RDN__GPMI_RDN
273						MX28_PAD_GPMI_WRN__GPMI_WRN
274						MX28_PAD_GPMI_RESETN__GPMI_RESETN
275					>;
276					fsl,drive-strength = <MXS_DRIVE_12mA>;
277				};
278
279				auart0_pins_a: auart0@0 {
280					reg = <0>;
281					fsl,pinmux-ids = <
282						MX28_PAD_AUART0_RX__AUART0_RX
283						MX28_PAD_AUART0_TX__AUART0_TX
284						MX28_PAD_AUART0_CTS__AUART0_CTS
285						MX28_PAD_AUART0_RTS__AUART0_RTS
286					>;
287					fsl,drive-strength = <MXS_DRIVE_4mA>;
288					fsl,voltage = <MXS_VOLTAGE_HIGH>;
289					fsl,pull-up = <MXS_PULL_DISABLE>;
290				};
291
292				auart0_2pins_a: auart0-2pins@0 {
293					reg = <0>;
294					fsl,pinmux-ids = <
295						MX28_PAD_AUART0_RX__AUART0_RX
296						MX28_PAD_AUART0_TX__AUART0_TX
297					>;
298					fsl,drive-strength = <MXS_DRIVE_4mA>;
299					fsl,voltage = <MXS_VOLTAGE_HIGH>;
300					fsl,pull-up = <MXS_PULL_DISABLE>;
301				};
302
303				auart1_pins_a: auart1@0 {
304					reg = <0>;
305					fsl,pinmux-ids = <
306						MX28_PAD_AUART1_RX__AUART1_RX
307						MX28_PAD_AUART1_TX__AUART1_TX
308						MX28_PAD_AUART1_CTS__AUART1_CTS
309						MX28_PAD_AUART1_RTS__AUART1_RTS
310					>;
311					fsl,drive-strength = <MXS_DRIVE_4mA>;
312					fsl,voltage = <MXS_VOLTAGE_HIGH>;
313					fsl,pull-up = <MXS_PULL_DISABLE>;
314				};
315
316				auart1_2pins_a: auart1-2pins@0 {
317					reg = <0>;
318					fsl,pinmux-ids = <
319						MX28_PAD_AUART1_RX__AUART1_RX
320						MX28_PAD_AUART1_TX__AUART1_TX
321					>;
322					fsl,drive-strength = <MXS_DRIVE_4mA>;
323					fsl,voltage = <MXS_VOLTAGE_HIGH>;
324					fsl,pull-up = <MXS_PULL_DISABLE>;
325				};
326
327				auart2_2pins_a: auart2-2pins@0 {
328					reg = <0>;
329					fsl,pinmux-ids = <
330						MX28_PAD_SSP2_SCK__AUART2_RX
331						MX28_PAD_SSP2_MOSI__AUART2_TX
332					>;
333					fsl,drive-strength = <MXS_DRIVE_4mA>;
334					fsl,voltage = <MXS_VOLTAGE_HIGH>;
335					fsl,pull-up = <MXS_PULL_DISABLE>;
336				};
337
338				auart2_2pins_b: auart2-2pins@1 {
339					reg = <1>;
340					fsl,pinmux-ids = <
341						MX28_PAD_AUART2_RX__AUART2_RX
342						MX28_PAD_AUART2_TX__AUART2_TX
343					>;
344					fsl,drive-strength = <MXS_DRIVE_4mA>;
345					fsl,voltage = <MXS_VOLTAGE_HIGH>;
346					fsl,pull-up = <MXS_PULL_DISABLE>;
347				};
348
349				auart2_pins_a: auart2-pins@0 {
350					reg = <0>;
351					fsl,pinmux-ids = <
352						MX28_PAD_AUART2_RX__AUART2_RX
353						MX28_PAD_AUART2_TX__AUART2_TX
354						MX28_PAD_AUART2_CTS__AUART2_CTS
355						MX28_PAD_AUART2_RTS__AUART2_RTS
356					>;
357					fsl,drive-strength = <MXS_DRIVE_4mA>;
358					fsl,voltage = <MXS_VOLTAGE_HIGH>;
359					fsl,pull-up = <MXS_PULL_DISABLE>;
360				};
361
362				auart3_pins_a: auart3@0 {
363					reg = <0>;
364					fsl,pinmux-ids = <
365						MX28_PAD_AUART3_RX__AUART3_RX
366						MX28_PAD_AUART3_TX__AUART3_TX
367						MX28_PAD_AUART3_CTS__AUART3_CTS
368						MX28_PAD_AUART3_RTS__AUART3_RTS
369					>;
370					fsl,drive-strength = <MXS_DRIVE_4mA>;
371					fsl,voltage = <MXS_VOLTAGE_HIGH>;
372					fsl,pull-up = <MXS_PULL_DISABLE>;
373				};
374
375				auart3_2pins_a: auart3-2pins@0 {
376					reg = <0>;
377					fsl,pinmux-ids = <
378						MX28_PAD_SSP2_MISO__AUART3_RX
379						MX28_PAD_SSP2_SS0__AUART3_TX
380					>;
381					fsl,drive-strength = <MXS_DRIVE_4mA>;
382					fsl,voltage = <MXS_VOLTAGE_HIGH>;
383					fsl,pull-up = <MXS_PULL_DISABLE>;
384				};
385
386				auart3_2pins_b: auart3-2pins@1 {
387					reg = <1>;
388					fsl,pinmux-ids = <
389						MX28_PAD_AUART3_RX__AUART3_RX
390						MX28_PAD_AUART3_TX__AUART3_TX
391					>;
392					fsl,drive-strength = <MXS_DRIVE_4mA>;
393					fsl,voltage = <MXS_VOLTAGE_HIGH>;
394					fsl,pull-up = <MXS_PULL_DISABLE>;
395				};
396
397				auart4_2pins_a: auart4@0 {
398					reg = <0>;
399					fsl,pinmux-ids = <
400						MX28_PAD_SSP3_SCK__AUART4_TX
401						MX28_PAD_SSP3_MOSI__AUART4_RX
402					>;
403					fsl,drive-strength = <MXS_DRIVE_4mA>;
404					fsl,voltage = <MXS_VOLTAGE_HIGH>;
405					fsl,pull-up = <MXS_PULL_DISABLE>;
406				};
407
408				mac0_pins_a: mac0@0 {
409					reg = <0>;
410					fsl,pinmux-ids = <
411						MX28_PAD_ENET0_MDC__ENET0_MDC
412						MX28_PAD_ENET0_MDIO__ENET0_MDIO
413						MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
414						MX28_PAD_ENET0_RXD0__ENET0_RXD0
415						MX28_PAD_ENET0_RXD1__ENET0_RXD1
416						MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
417						MX28_PAD_ENET0_TXD0__ENET0_TXD0
418						MX28_PAD_ENET0_TXD1__ENET0_TXD1
419						MX28_PAD_ENET_CLK__CLKCTRL_ENET
420					>;
421					fsl,drive-strength = <MXS_DRIVE_8mA>;
422					fsl,voltage = <MXS_VOLTAGE_HIGH>;
423					fsl,pull-up = <MXS_PULL_ENABLE>;
424				};
425
426				mac1_pins_a: mac1@0 {
427					reg = <0>;
428					fsl,pinmux-ids = <
429						MX28_PAD_ENET0_CRS__ENET1_RX_EN
430						MX28_PAD_ENET0_RXD2__ENET1_RXD0
431						MX28_PAD_ENET0_RXD3__ENET1_RXD1
432						MX28_PAD_ENET0_COL__ENET1_TX_EN
433						MX28_PAD_ENET0_TXD2__ENET1_TXD0
434						MX28_PAD_ENET0_TXD3__ENET1_TXD1
435					>;
436					fsl,drive-strength = <MXS_DRIVE_8mA>;
437					fsl,voltage = <MXS_VOLTAGE_HIGH>;
438					fsl,pull-up = <MXS_PULL_ENABLE>;
439				};
440
441				mmc0_8bit_pins_a: mmc0-8bit@0 {
442					reg = <0>;
443					fsl,pinmux-ids = <
444						MX28_PAD_SSP0_DATA0__SSP0_D0
445						MX28_PAD_SSP0_DATA1__SSP0_D1
446						MX28_PAD_SSP0_DATA2__SSP0_D2
447						MX28_PAD_SSP0_DATA3__SSP0_D3
448						MX28_PAD_SSP0_DATA4__SSP0_D4
449						MX28_PAD_SSP0_DATA5__SSP0_D5
450						MX28_PAD_SSP0_DATA6__SSP0_D6
451						MX28_PAD_SSP0_DATA7__SSP0_D7
452						MX28_PAD_SSP0_CMD__SSP0_CMD
453						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
454						MX28_PAD_SSP0_SCK__SSP0_SCK
455					>;
456					fsl,drive-strength = <MXS_DRIVE_8mA>;
457					fsl,voltage = <MXS_VOLTAGE_HIGH>;
458					fsl,pull-up = <MXS_PULL_ENABLE>;
459				};
460
461				mmc0_4bit_pins_a: mmc0-4bit@0 {
462					reg = <0>;
463					fsl,pinmux-ids = <
464						MX28_PAD_SSP0_DATA0__SSP0_D0
465						MX28_PAD_SSP0_DATA1__SSP0_D1
466						MX28_PAD_SSP0_DATA2__SSP0_D2
467						MX28_PAD_SSP0_DATA3__SSP0_D3
468						MX28_PAD_SSP0_CMD__SSP0_CMD
469						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
470						MX28_PAD_SSP0_SCK__SSP0_SCK
471					>;
472					fsl,drive-strength = <MXS_DRIVE_8mA>;
473					fsl,voltage = <MXS_VOLTAGE_HIGH>;
474					fsl,pull-up = <MXS_PULL_ENABLE>;
475				};
476
477				mmc0_cd_cfg: mmc0-cd-cfg {
478					fsl,pinmux-ids = <
479						MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
480					>;
481					fsl,pull-up = <MXS_PULL_DISABLE>;
482				};
483
484				mmc0_sck_cfg: mmc0-sck-cfg {
485					fsl,pinmux-ids = <
486						MX28_PAD_SSP0_SCK__SSP0_SCK
487					>;
488					fsl,drive-strength = <MXS_DRIVE_12mA>;
489					fsl,pull-up = <MXS_PULL_DISABLE>;
490				};
491
492				mmc1_4bit_pins_a: mmc1-4bit@0 {
493					reg = <0>;
494					fsl,pinmux-ids = <
495						MX28_PAD_GPMI_D00__SSP1_D0
496						MX28_PAD_GPMI_D01__SSP1_D1
497						MX28_PAD_GPMI_D02__SSP1_D2
498						MX28_PAD_GPMI_D03__SSP1_D3
499						MX28_PAD_GPMI_RDY1__SSP1_CMD
500						MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
501						MX28_PAD_GPMI_WRN__SSP1_SCK
502					>;
503					fsl,drive-strength = <MXS_DRIVE_8mA>;
504					fsl,voltage = <MXS_VOLTAGE_HIGH>;
505					fsl,pull-up = <MXS_PULL_ENABLE>;
506				};
507
508				mmc1_cd_cfg: mmc1-cd-cfg {
509					fsl,pinmux-ids = <
510						MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
511					>;
512					fsl,pull-up = <MXS_PULL_DISABLE>;
513				};
514
515				mmc1_sck_cfg: mmc1-sck-cfg {
516					fsl,pinmux-ids = <
517						MX28_PAD_GPMI_WRN__SSP1_SCK
518					>;
519					fsl,drive-strength = <MXS_DRIVE_12mA>;
520					fsl,pull-up = <MXS_PULL_DISABLE>;
521				};
522
523
524				mmc2_4bit_pins_a: mmc2-4bit@0 {
525					reg = <0>;
526					fsl,pinmux-ids = <
527						MX28_PAD_SSP0_DATA4__SSP2_D0
528						MX28_PAD_SSP1_SCK__SSP2_D1
529						MX28_PAD_SSP1_CMD__SSP2_D2
530						MX28_PAD_SSP0_DATA5__SSP2_D3
531						MX28_PAD_SSP0_DATA6__SSP2_CMD
532						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
533						MX28_PAD_SSP0_DATA7__SSP2_SCK
534					>;
535					fsl,drive-strength = <MXS_DRIVE_8mA>;
536					fsl,voltage = <MXS_VOLTAGE_HIGH>;
537					fsl,pull-up = <MXS_PULL_ENABLE>;
538				};
539
540				mmc2_cd_cfg: mmc2-cd-cfg {
541					fsl,pinmux-ids = <
542						MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
543					>;
544					fsl,pull-up = <MXS_PULL_DISABLE>;
545				};
546
547				mmc2_sck_cfg: mmc2-sck-cfg {
548					fsl,pinmux-ids = <
549						MX28_PAD_SSP0_DATA7__SSP2_SCK
550					>;
551					fsl,drive-strength = <MXS_DRIVE_12mA>;
552					fsl,pull-up = <MXS_PULL_DISABLE>;
553				};
554
555				i2c0_pins_a: i2c0@0 {
556					reg = <0>;
557					fsl,pinmux-ids = <
558						MX28_PAD_I2C0_SCL__I2C0_SCL
559						MX28_PAD_I2C0_SDA__I2C0_SDA
560					>;
561					fsl,drive-strength = <MXS_DRIVE_8mA>;
562					fsl,voltage = <MXS_VOLTAGE_HIGH>;
563					fsl,pull-up = <MXS_PULL_ENABLE>;
564				};
565
566				i2c0_pins_b: i2c0@1 {
567					reg = <1>;
568					fsl,pinmux-ids = <
569						MX28_PAD_AUART0_RX__I2C0_SCL
570						MX28_PAD_AUART0_TX__I2C0_SDA
571					>;
572					fsl,drive-strength = <MXS_DRIVE_8mA>;
573					fsl,voltage = <MXS_VOLTAGE_HIGH>;
574					fsl,pull-up = <MXS_PULL_ENABLE>;
575				};
576
577				i2c1_pins_a: i2c1@0 {
578					reg = <0>;
579					fsl,pinmux-ids = <
580						MX28_PAD_PWM0__I2C1_SCL
581						MX28_PAD_PWM1__I2C1_SDA
582					>;
583					fsl,drive-strength = <MXS_DRIVE_8mA>;
584					fsl,voltage = <MXS_VOLTAGE_HIGH>;
585					fsl,pull-up = <MXS_PULL_ENABLE>;
586				};
587
588				i2c1_pins_b: i2c1@1 {
589					reg = <1>;
590					fsl,pinmux-ids = <
591						MX28_PAD_AUART2_CTS__I2C1_SCL
592						MX28_PAD_AUART2_RTS__I2C1_SDA
593					>;
594					fsl,drive-strength = <MXS_DRIVE_8mA>;
595					fsl,voltage = <MXS_VOLTAGE_HIGH>;
596					fsl,pull-up = <MXS_PULL_ENABLE>;
597				};
598
599				saif0_pins_a: saif0@0 {
600					reg = <0>;
601					fsl,pinmux-ids = <
602						MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
603						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
604						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
605						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
606					>;
607					fsl,drive-strength = <MXS_DRIVE_12mA>;
608					fsl,voltage = <MXS_VOLTAGE_HIGH>;
609					fsl,pull-up = <MXS_PULL_ENABLE>;
610				};
611
612				saif0_pins_b: saif0@1 {
613					reg = <1>;
614					fsl,pinmux-ids = <
615						MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
616						MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
617						MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
618					>;
619					fsl,drive-strength = <MXS_DRIVE_12mA>;
620					fsl,voltage = <MXS_VOLTAGE_HIGH>;
621					fsl,pull-up = <MXS_PULL_ENABLE>;
622				};
623
624				saif1_pins_a: saif1@0 {
625					reg = <0>;
626					fsl,pinmux-ids = <
627						MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
628					>;
629					fsl,drive-strength = <MXS_DRIVE_12mA>;
630					fsl,voltage = <MXS_VOLTAGE_HIGH>;
631					fsl,pull-up = <MXS_PULL_ENABLE>;
632				};
633
634				pwm0_pins_a: pwm0@0 {
635					reg = <0>;
636					fsl,pinmux-ids = <
637						MX28_PAD_PWM0__PWM_0
638					>;
639					fsl,drive-strength = <MXS_DRIVE_4mA>;
640					fsl,voltage = <MXS_VOLTAGE_HIGH>;
641					fsl,pull-up = <MXS_PULL_DISABLE>;
642				};
643
644				pwm2_pins_a: pwm2@0 {
645					reg = <0>;
646					fsl,pinmux-ids = <
647						MX28_PAD_PWM2__PWM_2
648					>;
649					fsl,drive-strength = <MXS_DRIVE_4mA>;
650					fsl,voltage = <MXS_VOLTAGE_HIGH>;
651					fsl,pull-up = <MXS_PULL_DISABLE>;
652				};
653
654				pwm3_pins_a: pwm3@0 {
655					reg = <0>;
656					fsl,pinmux-ids = <
657						MX28_PAD_PWM3__PWM_3
658					>;
659					fsl,drive-strength = <MXS_DRIVE_4mA>;
660					fsl,voltage = <MXS_VOLTAGE_HIGH>;
661					fsl,pull-up = <MXS_PULL_DISABLE>;
662				};
663
664				pwm3_pins_b: pwm3@1 {
665					reg = <1>;
666					fsl,pinmux-ids = <
667						MX28_PAD_SAIF0_MCLK__PWM_3
668					>;
669					fsl,drive-strength = <MXS_DRIVE_4mA>;
670					fsl,voltage = <MXS_VOLTAGE_HIGH>;
671					fsl,pull-up = <MXS_PULL_DISABLE>;
672				};
673
674				pwm4_pins_a: pwm4@0 {
675					reg = <0>;
676					fsl,pinmux-ids = <
677						MX28_PAD_PWM4__PWM_4
678					>;
679					fsl,drive-strength = <MXS_DRIVE_4mA>;
680					fsl,voltage = <MXS_VOLTAGE_HIGH>;
681					fsl,pull-up = <MXS_PULL_DISABLE>;
682				};
683
684				lcdif_24bit_pins_a: lcdif-24bit@0 {
685					reg = <0>;
686					fsl,pinmux-ids = <
687						MX28_PAD_LCD_D00__LCD_D0
688						MX28_PAD_LCD_D01__LCD_D1
689						MX28_PAD_LCD_D02__LCD_D2
690						MX28_PAD_LCD_D03__LCD_D3
691						MX28_PAD_LCD_D04__LCD_D4
692						MX28_PAD_LCD_D05__LCD_D5
693						MX28_PAD_LCD_D06__LCD_D6
694						MX28_PAD_LCD_D07__LCD_D7
695						MX28_PAD_LCD_D08__LCD_D8
696						MX28_PAD_LCD_D09__LCD_D9
697						MX28_PAD_LCD_D10__LCD_D10
698						MX28_PAD_LCD_D11__LCD_D11
699						MX28_PAD_LCD_D12__LCD_D12
700						MX28_PAD_LCD_D13__LCD_D13
701						MX28_PAD_LCD_D14__LCD_D14
702						MX28_PAD_LCD_D15__LCD_D15
703						MX28_PAD_LCD_D16__LCD_D16
704						MX28_PAD_LCD_D17__LCD_D17
705						MX28_PAD_LCD_D18__LCD_D18
706						MX28_PAD_LCD_D19__LCD_D19
707						MX28_PAD_LCD_D20__LCD_D20
708						MX28_PAD_LCD_D21__LCD_D21
709						MX28_PAD_LCD_D22__LCD_D22
710						MX28_PAD_LCD_D23__LCD_D23
711					>;
712					fsl,drive-strength = <MXS_DRIVE_4mA>;
713					fsl,voltage = <MXS_VOLTAGE_HIGH>;
714					fsl,pull-up = <MXS_PULL_DISABLE>;
715				};
716
717				lcdif_18bit_pins_a: lcdif-18bit@0 {
718					reg = <0>;
719					fsl,pinmux-ids = <
720						MX28_PAD_LCD_D00__LCD_D0
721						MX28_PAD_LCD_D01__LCD_D1
722						MX28_PAD_LCD_D02__LCD_D2
723						MX28_PAD_LCD_D03__LCD_D3
724						MX28_PAD_LCD_D04__LCD_D4
725						MX28_PAD_LCD_D05__LCD_D5
726						MX28_PAD_LCD_D06__LCD_D6
727						MX28_PAD_LCD_D07__LCD_D7
728						MX28_PAD_LCD_D08__LCD_D8
729						MX28_PAD_LCD_D09__LCD_D9
730						MX28_PAD_LCD_D10__LCD_D10
731						MX28_PAD_LCD_D11__LCD_D11
732						MX28_PAD_LCD_D12__LCD_D12
733						MX28_PAD_LCD_D13__LCD_D13
734						MX28_PAD_LCD_D14__LCD_D14
735						MX28_PAD_LCD_D15__LCD_D15
736						MX28_PAD_LCD_D16__LCD_D16
737						MX28_PAD_LCD_D17__LCD_D17
738					>;
739					fsl,drive-strength = <MXS_DRIVE_4mA>;
740					fsl,voltage = <MXS_VOLTAGE_HIGH>;
741					fsl,pull-up = <MXS_PULL_DISABLE>;
742				};
743
744				lcdif_16bit_pins_a: lcdif-16bit@0 {
745					reg = <0>;
746					fsl,pinmux-ids = <
747						MX28_PAD_LCD_D00__LCD_D0
748						MX28_PAD_LCD_D01__LCD_D1
749						MX28_PAD_LCD_D02__LCD_D2
750						MX28_PAD_LCD_D03__LCD_D3
751						MX28_PAD_LCD_D04__LCD_D4
752						MX28_PAD_LCD_D05__LCD_D5
753						MX28_PAD_LCD_D06__LCD_D6
754						MX28_PAD_LCD_D07__LCD_D7
755						MX28_PAD_LCD_D08__LCD_D8
756						MX28_PAD_LCD_D09__LCD_D9
757						MX28_PAD_LCD_D10__LCD_D10
758						MX28_PAD_LCD_D11__LCD_D11
759						MX28_PAD_LCD_D12__LCD_D12
760						MX28_PAD_LCD_D13__LCD_D13
761						MX28_PAD_LCD_D14__LCD_D14
762						MX28_PAD_LCD_D15__LCD_D15
763					>;
764					fsl,drive-strength = <MXS_DRIVE_4mA>;
765					fsl,voltage = <MXS_VOLTAGE_HIGH>;
766					fsl,pull-up = <MXS_PULL_DISABLE>;
767				};
768
769				lcdif_sync_pins_a: lcdif-sync@0 {
770					reg = <0>;
771					fsl,pinmux-ids = <
772						MX28_PAD_LCD_RS__LCD_DOTCLK
773						MX28_PAD_LCD_CS__LCD_ENABLE
774						MX28_PAD_LCD_RD_E__LCD_VSYNC
775						MX28_PAD_LCD_WR_RWN__LCD_HSYNC
776					>;
777					fsl,drive-strength = <MXS_DRIVE_4mA>;
778					fsl,voltage = <MXS_VOLTAGE_HIGH>;
779					fsl,pull-up = <MXS_PULL_DISABLE>;
780				};
781
782				can0_pins_a: can0@0 {
783					reg = <0>;
784					fsl,pinmux-ids = <
785						MX28_PAD_GPMI_RDY2__CAN0_TX
786						MX28_PAD_GPMI_RDY3__CAN0_RX
787					>;
788					fsl,drive-strength = <MXS_DRIVE_4mA>;
789					fsl,voltage = <MXS_VOLTAGE_HIGH>;
790					fsl,pull-up = <MXS_PULL_DISABLE>;
791				};
792
793				can1_pins_a: can1@0 {
794					reg = <0>;
795					fsl,pinmux-ids = <
796						MX28_PAD_GPMI_CE2N__CAN1_TX
797						MX28_PAD_GPMI_CE3N__CAN1_RX
798					>;
799					fsl,drive-strength = <MXS_DRIVE_4mA>;
800					fsl,voltage = <MXS_VOLTAGE_HIGH>;
801					fsl,pull-up = <MXS_PULL_DISABLE>;
802				};
803
804				spi2_pins_a: spi2@0 {
805					reg = <0>;
806					fsl,pinmux-ids = <
807						MX28_PAD_SSP2_SCK__SSP2_SCK
808						MX28_PAD_SSP2_MOSI__SSP2_CMD
809						MX28_PAD_SSP2_MISO__SSP2_D0
810						MX28_PAD_SSP2_SS0__SSP2_D3
811					>;
812					fsl,drive-strength = <MXS_DRIVE_8mA>;
813					fsl,voltage = <MXS_VOLTAGE_HIGH>;
814					fsl,pull-up = <MXS_PULL_ENABLE>;
815				};
816
817				spi3_pins_a: spi3@0 {
818					reg = <0>;
819					fsl,pinmux-ids = <
820						MX28_PAD_AUART2_RX__SSP3_D4
821						MX28_PAD_AUART2_TX__SSP3_D5
822						MX28_PAD_SSP3_SCK__SSP3_SCK
823						MX28_PAD_SSP3_MOSI__SSP3_CMD
824						MX28_PAD_SSP3_MISO__SSP3_D0
825						MX28_PAD_SSP3_SS0__SSP3_D3
826					>;
827					fsl,drive-strength = <MXS_DRIVE_8mA>;
828					fsl,voltage = <MXS_VOLTAGE_HIGH>;
829					fsl,pull-up = <MXS_PULL_DISABLE>;
830				};
831
832				usb0_pins_a: usb0@0 {
833					reg = <0>;
834					fsl,pinmux-ids = <
835						MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
836					>;
837					fsl,drive-strength = <MXS_DRIVE_12mA>;
838					fsl,voltage = <MXS_VOLTAGE_HIGH>;
839					fsl,pull-up = <MXS_PULL_DISABLE>;
840				};
841
842				usb0_pins_b: usb0@1 {
843					reg = <1>;
844					fsl,pinmux-ids = <
845						MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
846					>;
847					fsl,drive-strength = <MXS_DRIVE_12mA>;
848					fsl,voltage = <MXS_VOLTAGE_HIGH>;
849					fsl,pull-up = <MXS_PULL_DISABLE>;
850				};
851
852				usb1_pins_a: usb1@0 {
853					reg = <0>;
854					fsl,pinmux-ids = <
855						MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
856					>;
857					fsl,drive-strength = <MXS_DRIVE_12mA>;
858					fsl,voltage = <MXS_VOLTAGE_HIGH>;
859					fsl,pull-up = <MXS_PULL_DISABLE>;
860				};
861
862				usb0_id_pins_a: usb0id@0 {
863					reg = <0>;
864					fsl,pinmux-ids = <
865						MX28_PAD_AUART1_RTS__USB0_ID
866					>;
867					fsl,drive-strength = <MXS_DRIVE_12mA>;
868					fsl,voltage = <MXS_VOLTAGE_HIGH>;
869					fsl,pull-up = <MXS_PULL_ENABLE>;
870				};
871
872				usb0_id_pins_b: usb0id1@0 {
873					reg = <0>;
874					fsl,pinmux-ids = <
875						MX28_PAD_PWM2__USB0_ID
876					>;
877					fsl,drive-strength = <MXS_DRIVE_12mA>;
878					fsl,voltage = <MXS_VOLTAGE_HIGH>;
879					fsl,pull-up = <MXS_PULL_ENABLE>;
880				};
881
882			};
883
884			digctl: digctl@8001c000 {
885				compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
886				reg = <0x8001c000 0x2000>;
887				interrupts = <89>;
888				status = "disabled";
889			};
890
891			etm: etm@80022000 {
892				reg = <0x80022000 0x2000>;
893				status = "disabled";
894			};
895
896			dma_apbx: dma-apbx@80024000 {
897				compatible = "fsl,imx28-dma-apbx";
898				reg = <0x80024000 0x2000>;
899				interrupts = <78 79 66 0
900					      80 81 68 69
901					      70 71 72 73
902					      74 75 76 77>;
903				interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
904						  "saif0", "saif1", "i2c0", "i2c1",
905						  "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
906						  "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
907				#dma-cells = <1>;
908				dma-channels = <16>;
909				clocks = <&clks 26>;
910			};
911
912			dcp: dcp@80028000 {
913				compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
914				reg = <0x80028000 0x2000>;
915				interrupts = <52 53 54>;
916				status = "okay";
917			};
918
919			pxp: pxp@8002a000 {
920				reg = <0x8002a000 0x2000>;
921				interrupts = <39>;
922				status = "disabled";
923			};
924
925			ocotp: ocotp@8002c000 {
926				compatible = "fsl,ocotp";
927				reg = <0x8002c000 0x2000>;
928				status = "disabled";
929			};
930
931			axi-ahb@8002e000 {
932				reg = <0x8002e000 0x2000>;
933				status = "disabled";
934			};
935
936			lcdif: lcdif@80030000 {
937				compatible = "fsl,imx28-lcdif";
938				reg = <0x80030000 0x2000>;
939				interrupts = <38>;
940				clocks = <&clks 55>;
941				dmas = <&dma_apbh 13>;
942				dma-names = "rx";
943				status = "disabled";
944			};
945
946			can0: can@80032000 {
947				compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
948				reg = <0x80032000 0x2000>;
949				interrupts = <8>;
950				clocks = <&clks 58>, <&clks 58>;
951				clock-names = "ipg", "per";
952				status = "disabled";
953			};
954
955			can1: can@80034000 {
956				compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
957				reg = <0x80034000 0x2000>;
958				interrupts = <9>;
959				clocks = <&clks 59>, <&clks 59>;
960				clock-names = "ipg", "per";
961				status = "disabled";
962			};
963
964			simdbg: simdbg@8003c000 {
965				reg = <0x8003c000 0x200>;
966				status = "disabled";
967			};
968
969			simgpmisel: simgpmisel@8003c200 {
970				reg = <0x8003c200 0x100>;
971				status = "disabled";
972			};
973
974			simsspsel: simsspsel@8003c300 {
975				reg = <0x8003c300 0x100>;
976				status = "disabled";
977			};
978
979			simmemsel: simmemsel@8003c400 {
980				reg = <0x8003c400 0x100>;
981				status = "disabled";
982			};
983
984			gpiomon: gpiomon@8003c500 {
985				reg = <0x8003c500 0x100>;
986				status = "disabled";
987			};
988
989			simenet: simenet@8003c700 {
990				reg = <0x8003c700 0x100>;
991				status = "disabled";
992			};
993
994			armjtag: armjtag@8003c800 {
995				reg = <0x8003c800 0x100>;
996				status = "disabled";
997			};
998		};
999
1000		apbx@80040000 {
1001			compatible = "simple-bus";
1002			#address-cells = <1>;
1003			#size-cells = <1>;
1004			reg = <0x80040000 0x40000>;
1005			ranges;
1006
1007			clks: clkctrl@80040000 {
1008				compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
1009				reg = <0x80040000 0x2000>;
1010				#clock-cells = <1>;
1011			};
1012
1013			saif0: saif@80042000 {
1014				compatible = "fsl,imx28-saif";
1015				reg = <0x80042000 0x2000>;
1016				interrupts = <59>;
1017				#clock-cells = <0>;
1018				clocks = <&clks 53>;
1019				dmas = <&dma_apbx 4>;
1020				dma-names = "rx-tx";
1021				status = "disabled";
1022			};
1023
1024			power: power@80044000 {
1025				reg = <0x80044000 0x2000>;
1026				status = "disabled";
1027			};
1028
1029			saif1: saif@80046000 {
1030				compatible = "fsl,imx28-saif";
1031				reg = <0x80046000 0x2000>;
1032				interrupts = <58>;
1033				clocks = <&clks 54>;
1034				dmas = <&dma_apbx 5>;
1035				dma-names = "rx-tx";
1036				status = "disabled";
1037			};
1038
1039			lradc: lradc@80050000 {
1040				compatible = "fsl,imx28-lradc";
1041				reg = <0x80050000 0x2000>;
1042				interrupts = <10 14 15 16 17 18 19
1043						20 21 22 23 24 25>;
1044				status = "disabled";
1045				clocks = <&clks 41>;
1046				#io-channel-cells = <1>;
1047			};
1048
1049			spdif: spdif@80054000 {
1050				reg = <0x80054000 0x2000>;
1051				interrupts = <45>;
1052				dmas = <&dma_apbx 2>;
1053				dma-names = "tx";
1054				status = "disabled";
1055			};
1056
1057			mxs_rtc: rtc@80056000 {
1058				compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
1059				reg = <0x80056000 0x2000>;
1060				interrupts = <29>;
1061			};
1062
1063			i2c0: i2c@80058000 {
1064				#address-cells = <1>;
1065				#size-cells = <0>;
1066				compatible = "fsl,imx28-i2c";
1067				reg = <0x80058000 0x2000>;
1068				interrupts = <111>;
1069				clock-frequency = <100000>;
1070				dmas = <&dma_apbx 6>;
1071				dma-names = "rx-tx";
1072				status = "disabled";
1073			};
1074
1075			i2c1: i2c@8005a000 {
1076				#address-cells = <1>;
1077				#size-cells = <0>;
1078				compatible = "fsl,imx28-i2c";
1079				reg = <0x8005a000 0x2000>;
1080				interrupts = <110>;
1081				clock-frequency = <100000>;
1082				dmas = <&dma_apbx 7>;
1083				dma-names = "rx-tx";
1084				status = "disabled";
1085			};
1086
1087			pwm: pwm@80064000 {
1088				compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
1089				reg = <0x80064000 0x2000>;
1090				clocks = <&clks 44>;
1091				#pwm-cells = <2>;
1092				fsl,pwm-number = <8>;
1093				status = "disabled";
1094			};
1095
1096			timer: timrot@80068000 {
1097				compatible = "fsl,imx28-timrot", "fsl,timrot";
1098				reg = <0x80068000 0x2000>;
1099				interrupts = <48 49 50 51>;
1100				clocks = <&clks 26>;
1101			};
1102
1103			auart0: serial@8006a000 {
1104				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1105				reg = <0x8006a000 0x2000>;
1106				interrupts = <112>;
1107				dmas = <&dma_apbx 8>, <&dma_apbx 9>;
1108				dma-names = "rx", "tx";
1109				clocks = <&clks 45>;
1110				status = "disabled";
1111			};
1112
1113			auart1: serial@8006c000 {
1114				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1115				reg = <0x8006c000 0x2000>;
1116				interrupts = <113>;
1117				dmas = <&dma_apbx 10>, <&dma_apbx 11>;
1118				dma-names = "rx", "tx";
1119				clocks = <&clks 45>;
1120				status = "disabled";
1121			};
1122
1123			auart2: serial@8006e000 {
1124				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1125				reg = <0x8006e000 0x2000>;
1126				interrupts = <114>;
1127				dmas = <&dma_apbx 12>, <&dma_apbx 13>;
1128				dma-names = "rx", "tx";
1129				clocks = <&clks 45>;
1130				status = "disabled";
1131			};
1132
1133			auart3: serial@80070000 {
1134				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1135				reg = <0x80070000 0x2000>;
1136				interrupts = <115>;
1137				dmas = <&dma_apbx 14>, <&dma_apbx 15>;
1138				dma-names = "rx", "tx";
1139				clocks = <&clks 45>;
1140				status = "disabled";
1141			};
1142
1143			auart4: serial@80072000 {
1144				compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1145				reg = <0x80072000 0x2000>;
1146				interrupts = <116>;
1147				dmas = <&dma_apbx 0>, <&dma_apbx 1>;
1148				dma-names = "rx", "tx";
1149				clocks = <&clks 45>;
1150				status = "disabled";
1151			};
1152
1153			duart: serial@80074000 {
1154				compatible = "arm,pl011", "arm,primecell";
1155				reg = <0x80074000 0x1000>;
1156				interrupts = <47>;
1157				clocks = <&clks 45>, <&clks 26>;
1158				clock-names = "uart", "apb_pclk";
1159				status = "disabled";
1160			};
1161
1162			usbphy0: usbphy@8007c000 {
1163				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1164				reg = <0x8007c000 0x2000>;
1165				clocks = <&clks 62>;
1166				status = "disabled";
1167			};
1168
1169			usbphy1: usbphy@8007e000 {
1170				compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1171				reg = <0x8007e000 0x2000>;
1172				clocks = <&clks 63>;
1173				status = "disabled";
1174			};
1175		};
1176	};
1177
1178	ahb@80080000 {
1179		compatible = "simple-bus";
1180		#address-cells = <1>;
1181		#size-cells = <1>;
1182		reg = <0x80080000 0x80000>;
1183		ranges;
1184
1185		usb0: usb@80080000 {
1186			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1187			reg = <0x80080000 0x10000>;
1188			interrupts = <93>;
1189			clocks = <&clks 60>;
1190			fsl,usbphy = <&usbphy0>;
1191			status = "disabled";
1192		};
1193
1194		usb1: usb@80090000 {
1195			compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1196			reg = <0x80090000 0x10000>;
1197			interrupts = <92>;
1198			clocks = <&clks 61>;
1199			fsl,usbphy = <&usbphy1>;
1200			status = "disabled";
1201		};
1202
1203		dflpt: dflpt@800c0000 {
1204			reg = <0x800c0000 0x10000>;
1205			status = "disabled";
1206		};
1207
1208		mac0: ethernet@800f0000 {
1209			compatible = "fsl,imx28-fec";
1210			reg = <0x800f0000 0x4000>;
1211			interrupts = <101>;
1212			clocks = <&clks 57>, <&clks 57>, <&clks 64>;
1213			clock-names = "ipg", "ahb", "enet_out";
1214			status = "disabled";
1215		};
1216
1217		mac1: ethernet@800f4000 {
1218			compatible = "fsl,imx28-fec";
1219			reg = <0x800f4000 0x4000>;
1220			interrupts = <102>;
1221			clocks = <&clks 57>, <&clks 57>;
1222			clock-names = "ipg", "ahb";
1223			status = "disabled";
1224		};
1225
1226		etn_switch: switch@800f8000 {
1227			reg = <0x800f8000 0x8000>;
1228			status = "disabled";
1229		};
1230	};
1231
1232	iio_hwmon {
1233		compatible = "iio-hwmon";
1234		io-channels = <&lradc 8>;
1235	};
1236};
1237