• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1/*
2 * Copyright 2012 Stefan Roese
3 * Stefan Roese <sr@denx.de>
4 *
5 * The code contained herein is licensed under the GNU General Public
6 * License. You may obtain a copy of the GNU General Public License
7 * Version 2 or later at the following locations:
8 *
9 * http://www.opensource.org/licenses/gpl-license.html
10 * http://www.gnu.org/copyleft/gpl.html
11 */
12
13/dts-v1/;
14/include/ "sun4i-a10.dtsi"
15/include/ "sunxi-common-regulators.dtsi"
16
17/ {
18	model = "Cubietech Cubieboard";
19	compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10";
20
21	soc@01c00000 {
22		emac: ethernet@01c0b000 {
23			pinctrl-names = "default";
24			pinctrl-0 = <&emac_pins_a>;
25			phy = <&phy1>;
26			status = "okay";
27		};
28
29		mdio@01c0b080 {
30			status = "okay";
31
32			phy1: ethernet-phy@1 {
33				reg = <1>;
34			};
35		};
36
37		mmc0: mmc@01c0f000 {
38			pinctrl-names = "default";
39			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
40			vmmc-supply = <&reg_vcc3v3>;
41			bus-width = <4>;
42			cd-gpios = <&pio 7 1 0>; /* PH1 */
43			cd-inverted;
44			status = "okay";
45		};
46
47		usbphy: phy@01c13400 {
48			usb1_vbus-supply = <&reg_usb1_vbus>;
49			usb2_vbus-supply = <&reg_usb2_vbus>;
50			status = "okay";
51		};
52
53		ehci0: usb@01c14000 {
54			status = "okay";
55		};
56
57		ohci0: usb@01c14400 {
58			status = "okay";
59		};
60
61		ahci: sata@01c18000 {
62			target-supply = <&reg_ahci_5v>;
63			status = "okay";
64		};
65
66		ehci1: usb@01c1c000 {
67			status = "okay";
68		};
69
70		ohci1: usb@01c1c400 {
71			status = "okay";
72		};
73
74		pinctrl@01c20800 {
75			led_pins_cubieboard: led_pins@0 {
76				allwinner,pins = "PH20", "PH21";
77				allwinner,function = "gpio_out";
78				allwinner,drive = <1>;
79				allwinner,pull = <0>;
80			};
81		};
82
83		ir0: ir@01c21800 {
84			pinctrl-names = "default";
85			pinctrl-0 = <&ir0_pins_a>;
86			status = "okay";
87		};
88
89		uart0: serial@01c28000 {
90			pinctrl-names = "default";
91			pinctrl-0 = <&uart0_pins_a>;
92			status = "okay";
93		};
94
95		i2c0: i2c@01c2ac00 {
96			pinctrl-names = "default";
97			pinctrl-0 = <&i2c0_pins_a>;
98			status = "okay";
99
100			axp209: pmic@34 {
101				compatible = "x-powers,axp209";
102				reg = <0x34>;
103				interrupts = <0>;
104
105				interrupt-controller;
106				#interrupt-cells = <1>;
107			};
108		};
109
110		i2c1: i2c@01c2b000 {
111			pinctrl-names = "default";
112			pinctrl-0 = <&i2c1_pins_a>;
113			status = "okay";
114		};
115	};
116
117	leds {
118		compatible = "gpio-leds";
119		pinctrl-names = "default";
120		pinctrl-0 = <&led_pins_cubieboard>;
121
122		blue {
123			label = "cubieboard:blue:usr";
124			gpios = <&pio 7 21 0>; /* LED1 */
125		};
126
127		green {
128			label = "cubieboard:green:usr";
129			gpios = <&pio 7 20 0>; /* LED2 */
130			linux,default-trigger = "heartbeat";
131		};
132	};
133
134	reg_ahci_5v: ahci-5v {
135		status = "okay";
136	};
137
138	reg_usb1_vbus: usb1-vbus {
139		status = "okay";
140	};
141
142	reg_usb2_vbus: usb2-vbus {
143		status = "okay";
144	};
145};
146