• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * linux/arch/arm/mach-omap1/board-voiceblue.c
3  *
4  * Modified from board-generic.c
5  *
6  * Copyright (C) 2004 2N Telekomunikace, Ladislav Michl <michl@2n.cz>
7  *
8  * Code for OMAP5910 based VoiceBlue board (VoIP to GSM gateway).
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License version 2 as
12  * published by the Free Software Foundation.
13  */
14 
15 #include <linux/delay.h>
16 #include <linux/gpio.h>
17 #include <linux/platform_device.h>
18 #include <linux/interrupt.h>
19 #include <linux/irq.h>
20 #include <linux/init.h>
21 #include <linux/kernel.h>
22 #include <linux/mtd/physmap.h>
23 #include <linux/notifier.h>
24 #include <linux/reboot.h>
25 #include <linux/serial_8250.h>
26 #include <linux/serial_reg.h>
27 #include <linux/smc91x.h>
28 #include <linux/export.h>
29 #include <linux/reboot.h>
30 
31 #include <asm/mach-types.h>
32 #include <asm/mach/arch.h>
33 #include <asm/mach/map.h>
34 
35 #include <mach/board-voiceblue.h>
36 #include <mach/flash.h>
37 #include <mach/mux.h>
38 #include <mach/tc.h>
39 
40 #include <mach/hardware.h>
41 #include <mach/usb.h>
42 
43 #include "common.h"
44 
45 static struct plat_serial8250_port voiceblue_ports[] = {
46 	{
47 		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x40000),
48 		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
49 		.iotype		= UPIO_MEM,
50 		.regshift	= 1,
51 		.uartclk	= 3686400,
52 	},
53 	{
54 		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x50000),
55 		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
56 		.iotype		= UPIO_MEM,
57 		.regshift	= 1,
58 		.uartclk	= 3686400,
59 	},
60 	{
61 		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x60000),
62 		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
63 		.iotype		= UPIO_MEM,
64 		.regshift	= 1,
65 		.uartclk	= 3686400,
66 	},
67 	{
68 		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x70000),
69 		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP,
70 		.iotype		= UPIO_MEM,
71 		.regshift	= 1,
72 		.uartclk	= 3686400,
73 	},
74 	{ },
75 };
76 
77 static struct platform_device serial_device = {
78 	.name			= "serial8250",
79 	.id			= PLAT8250_DEV_PLATFORM1,
80 };
81 
ext_uart_init(void)82 static int __init ext_uart_init(void)
83 {
84 	if (!machine_is_voiceblue())
85 		return -ENODEV;
86 
87 	voiceblue_ports[0].irq = gpio_to_irq(12);
88 	voiceblue_ports[1].irq = gpio_to_irq(13);
89 	voiceblue_ports[2].irq = gpio_to_irq(14);
90 	voiceblue_ports[3].irq = gpio_to_irq(15);
91 	serial_device.dev.platform_data = voiceblue_ports;
92 	return platform_device_register(&serial_device);
93 }
94 arch_initcall(ext_uart_init);
95 
96 static struct physmap_flash_data voiceblue_flash_data = {
97 	.width		= 2,
98 	.set_vpp	= omap1_set_vpp,
99 };
100 
101 static struct resource voiceblue_flash_resource = {
102 	.start	= OMAP_CS0_PHYS,
103 	.end	= OMAP_CS0_PHYS + SZ_32M - 1,
104 	.flags	= IORESOURCE_MEM,
105 };
106 
107 static struct platform_device voiceblue_flash_device = {
108 	.name		= "physmap-flash",
109 	.id		= 0,
110 	.dev		= {
111 		.platform_data	= &voiceblue_flash_data,
112 	},
113 	.num_resources	= 1,
114 	.resource	= &voiceblue_flash_resource,
115 };
116 
117 static struct smc91x_platdata voiceblue_smc91x_info = {
118 	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
119 	.leda	= RPC_LED_100_10,
120 	.ledb	= RPC_LED_TX_RX,
121 };
122 
123 static struct resource voiceblue_smc91x_resources[] = {
124 	[0] = {
125 		.start	= OMAP_CS2_PHYS + 0x300,
126 		.end	= OMAP_CS2_PHYS + 0x300 + 16,
127 		.flags	= IORESOURCE_MEM,
128 	},
129 	[1] = {
130 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
131 	},
132 };
133 
134 static struct platform_device voiceblue_smc91x_device = {
135 	.name		= "smc91x",
136 	.id		= 0,
137 	.dev	= {
138 		.platform_data	= &voiceblue_smc91x_info,
139 	},
140 	.num_resources	= ARRAY_SIZE(voiceblue_smc91x_resources),
141 	.resource	= voiceblue_smc91x_resources,
142 };
143 
144 static struct platform_device *voiceblue_devices[] __initdata = {
145 	&voiceblue_flash_device,
146 	&voiceblue_smc91x_device,
147 };
148 
149 static struct omap_usb_config voiceblue_usb_config __initdata = {
150 	.hmc_mode	= 3,
151 	.register_host	= 1,
152 	.register_dev   = 1,
153 	.pins[0]	= 2,
154 	.pins[1]	= 6,
155 	.pins[2]	= 6,
156 };
157 
158 #define MACHINE_PANICED		1
159 #define MACHINE_REBOOTING	2
160 #define MACHINE_REBOOT		4
161 static unsigned long machine_state;
162 
panic_event(struct notifier_block * this,unsigned long event,void * ptr)163 static int panic_event(struct notifier_block *this, unsigned long event,
164 	 void *ptr)
165 {
166 	if (test_and_set_bit(MACHINE_PANICED, &machine_state))
167 		return NOTIFY_DONE;
168 
169 	/* Flash power LED */
170 	omap_writeb(0x78, OMAP_LPG1_LCR);
171 	omap_writeb(0x01, OMAP_LPG1_PMR);	/* Enable clock */
172 
173 	return NOTIFY_DONE;
174 }
175 
176 static struct notifier_block panic_block = {
177 	.notifier_call	= panic_event,
178 };
179 
voiceblue_setup(void)180 static int __init voiceblue_setup(void)
181 {
182 	if (!machine_is_voiceblue())
183 		return -ENODEV;
184 
185 	/* Setup panic notifier */
186 	atomic_notifier_chain_register(&panic_notifier_list, &panic_block);
187 
188 	return 0;
189 }
190 postcore_initcall(voiceblue_setup);
191 
192 static int wdt_gpio_state;
193 
voiceblue_wdt_enable(void)194 void voiceblue_wdt_enable(void)
195 {
196 	gpio_direction_output(0, 0);
197 	gpio_set_value(0, 1);
198 	gpio_set_value(0, 0);
199 	wdt_gpio_state = 0;
200 }
201 
voiceblue_wdt_disable(void)202 void voiceblue_wdt_disable(void)
203 {
204 	gpio_set_value(0, 0);
205 	gpio_set_value(0, 1);
206 	gpio_set_value(0, 0);
207 	gpio_direction_input(0);
208 }
209 
voiceblue_wdt_ping(void)210 void voiceblue_wdt_ping(void)
211 {
212 	if (test_bit(MACHINE_REBOOT, &machine_state))
213 		return;
214 
215 	wdt_gpio_state = !wdt_gpio_state;
216 	gpio_set_value(0, wdt_gpio_state);
217 }
218 
voiceblue_restart(enum reboot_mode mode,const char * cmd)219 static void voiceblue_restart(enum reboot_mode mode, const char *cmd)
220 {
221 	/*
222 	 * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28
223 	 * "Global Software Reset Affects Traffic Controller Frequency".
224 	 */
225 	if (cpu_is_omap5912()) {
226 		omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL);
227 		omap_writew(0x8, ARM_RSTCT1);
228 	}
229 
230 	set_bit(MACHINE_REBOOT, &machine_state);
231 	voiceblue_wdt_enable();
232 	while (1) ;
233 }
234 
235 EXPORT_SYMBOL(voiceblue_wdt_enable);
236 EXPORT_SYMBOL(voiceblue_wdt_disable);
237 EXPORT_SYMBOL(voiceblue_wdt_ping);
238 
voiceblue_init(void)239 static void __init voiceblue_init(void)
240 {
241 	/* mux pins for uarts */
242 	omap_cfg_reg(UART1_TX);
243 	omap_cfg_reg(UART1_RTS);
244 	omap_cfg_reg(UART2_TX);
245 	omap_cfg_reg(UART2_RTS);
246 	omap_cfg_reg(UART3_TX);
247 	omap_cfg_reg(UART3_RX);
248 
249 	/* Watchdog */
250 	gpio_request(0, "Watchdog");
251 	/* smc91x reset */
252 	gpio_request(7, "SMC91x reset");
253 	gpio_direction_output(7, 1);
254 	udelay(2);	/* wait at least 100ns */
255 	gpio_set_value(7, 0);
256 	mdelay(50);	/* 50ms until PHY ready */
257 	/* smc91x interrupt pin */
258 	gpio_request(8, "SMC91x irq");
259 	/* 16C554 reset*/
260 	gpio_request(6, "16C554 reset");
261 	gpio_direction_output(6, 0);
262 	/* 16C554 interrupt pins */
263 	gpio_request(12, "16C554 irq");
264 	gpio_request(13, "16C554 irq");
265 	gpio_request(14, "16C554 irq");
266 	gpio_request(15, "16C554 irq");
267 	irq_set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING);
268 	irq_set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING);
269 	irq_set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING);
270 	irq_set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING);
271 
272 	voiceblue_smc91x_resources[1].start = gpio_to_irq(8);
273 	voiceblue_smc91x_resources[1].end = gpio_to_irq(8);
274 	platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices));
275 	omap_serial_init();
276 	omap1_usb_init(&voiceblue_usb_config);
277 	omap_register_i2c_bus(1, 100, NULL, 0);
278 
279 	/* There is a good chance board is going up, so enable power LED
280 	 * (it is connected through invertor) */
281 	omap_writeb(0x00, OMAP_LPG1_LCR);
282 	omap_writeb(0x00, OMAP_LPG1_PMR);	/* Disable clock */
283 }
284 
285 MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
286 	/* Maintainer: Ladislav Michl <michl@2n.cz> */
287 	.atag_offset	= 0x100,
288 	.map_io		= omap15xx_map_io,
289 	.init_early     = omap1_init_early,
290 	.init_irq	= omap1_init_irq,
291 	.init_machine	= voiceblue_init,
292 	.init_late	= omap1_init_late,
293 	.init_time	= omap1_timer_init,
294 	.restart	= voiceblue_restart,
295 MACHINE_END
296