• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * linux/arch/arm/mach-pxa/lpd270.c
3  *
4  * Support for the LogicPD PXA270 Card Engine.
5  * Derived from the mainstone code, which carries these notices:
6  *
7  * Author:	Nicolas Pitre
8  * Created:	Nov 05, 2002
9  * Copyright:	MontaVista Software Inc.
10  *
11  * This program is free software; you can redistribute it and/or modify
12  * it under the terms of the GNU General Public License version 2 as
13  * published by the Free Software Foundation.
14  */
15 #include <linux/gpio.h>
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/syscore_ops.h>
19 #include <linux/interrupt.h>
20 #include <linux/sched.h>
21 #include <linux/bitops.h>
22 #include <linux/fb.h>
23 #include <linux/ioport.h>
24 #include <linux/mtd/mtd.h>
25 #include <linux/mtd/partitions.h>
26 #include <linux/pwm_backlight.h>
27 
28 #include <asm/types.h>
29 #include <asm/setup.h>
30 #include <asm/memory.h>
31 #include <asm/mach-types.h>
32 #include <mach/hardware.h>
33 #include <asm/irq.h>
34 #include <asm/sizes.h>
35 
36 #include <asm/mach/arch.h>
37 #include <asm/mach/map.h>
38 #include <asm/mach/irq.h>
39 #include <asm/mach/flash.h>
40 
41 #include <mach/pxa27x.h>
42 #include <mach/lpd270.h>
43 #include <mach/audio.h>
44 #include <linux/platform_data/video-pxafb.h>
45 #include <linux/platform_data/mmc-pxamci.h>
46 #include <linux/platform_data/irda-pxaficp.h>
47 #include <linux/platform_data/usb-ohci-pxa27x.h>
48 #include <mach/smemc.h>
49 
50 #include "generic.h"
51 #include "devices.h"
52 
53 static unsigned long lpd270_pin_config[] __initdata = {
54 	/* Chip Selects */
55 	GPIO15_nCS_1,	/* Mainboard Flash */
56 	GPIO78_nCS_2,	/* CPLD + Ethernet */
57 
58 	/* LCD - 16bpp Active TFT */
59 	GPIO58_LCD_LDD_0,
60 	GPIO59_LCD_LDD_1,
61 	GPIO60_LCD_LDD_2,
62 	GPIO61_LCD_LDD_3,
63 	GPIO62_LCD_LDD_4,
64 	GPIO63_LCD_LDD_5,
65 	GPIO64_LCD_LDD_6,
66 	GPIO65_LCD_LDD_7,
67 	GPIO66_LCD_LDD_8,
68 	GPIO67_LCD_LDD_9,
69 	GPIO68_LCD_LDD_10,
70 	GPIO69_LCD_LDD_11,
71 	GPIO70_LCD_LDD_12,
72 	GPIO71_LCD_LDD_13,
73 	GPIO72_LCD_LDD_14,
74 	GPIO73_LCD_LDD_15,
75 	GPIO74_LCD_FCLK,
76 	GPIO75_LCD_LCLK,
77 	GPIO76_LCD_PCLK,
78 	GPIO77_LCD_BIAS,
79 	GPIO16_PWM0_OUT,	/* Backlight */
80 
81 	/* USB Host */
82 	GPIO88_USBH1_PWR,
83 	GPIO89_USBH1_PEN,
84 
85 	/* AC97 */
86 	GPIO28_AC97_BITCLK,
87 	GPIO29_AC97_SDATA_IN_0,
88 	GPIO30_AC97_SDATA_OUT,
89 	GPIO31_AC97_SYNC,
90 	GPIO45_AC97_SYSCLK,
91 
92 	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
93 };
94 
95 static unsigned int lpd270_irq_enabled;
96 
lpd270_mask_irq(struct irq_data * d)97 static void lpd270_mask_irq(struct irq_data *d)
98 {
99 	int lpd270_irq = d->irq - LPD270_IRQ(0);
100 
101 	__raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS);
102 
103 	lpd270_irq_enabled &= ~(1 << lpd270_irq);
104 	__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
105 }
106 
lpd270_unmask_irq(struct irq_data * d)107 static void lpd270_unmask_irq(struct irq_data *d)
108 {
109 	int lpd270_irq = d->irq - LPD270_IRQ(0);
110 
111 	lpd270_irq_enabled |= 1 << lpd270_irq;
112 	__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
113 }
114 
115 static struct irq_chip lpd270_irq_chip = {
116 	.name		= "CPLD",
117 	.irq_ack	= lpd270_mask_irq,
118 	.irq_mask	= lpd270_mask_irq,
119 	.irq_unmask	= lpd270_unmask_irq,
120 };
121 
lpd270_irq_handler(unsigned int irq,struct irq_desc * desc)122 static void lpd270_irq_handler(unsigned int irq, struct irq_desc *desc)
123 {
124 	unsigned long pending;
125 
126 	pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
127 	do {
128 		/* clear useless edge notification */
129 		desc->irq_data.chip->irq_ack(&desc->irq_data);
130 		if (likely(pending)) {
131 			irq = LPD270_IRQ(0) + __ffs(pending);
132 			generic_handle_irq(irq);
133 
134 			pending = __raw_readw(LPD270_INT_STATUS) &
135 						lpd270_irq_enabled;
136 		}
137 	} while (pending);
138 }
139 
lpd270_init_irq(void)140 static void __init lpd270_init_irq(void)
141 {
142 	int irq;
143 
144 	pxa27x_init_irq();
145 
146 	__raw_writew(0, LPD270_INT_MASK);
147 	__raw_writew(0, LPD270_INT_STATUS);
148 
149 	/* setup extra LogicPD PXA270 irqs */
150 	for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) {
151 		irq_set_chip_and_handler(irq, &lpd270_irq_chip,
152 					 handle_level_irq);
153 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
154 	}
155 	irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lpd270_irq_handler);
156 	irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
157 }
158 
159 
160 #ifdef CONFIG_PM
lpd270_irq_resume(void)161 static void lpd270_irq_resume(void)
162 {
163 	__raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
164 }
165 
166 static struct syscore_ops lpd270_irq_syscore_ops = {
167 	.resume = lpd270_irq_resume,
168 };
169 
lpd270_irq_device_init(void)170 static int __init lpd270_irq_device_init(void)
171 {
172 	if (machine_is_logicpd_pxa270()) {
173 		register_syscore_ops(&lpd270_irq_syscore_ops);
174 		return 0;
175 	}
176 	return -ENODEV;
177 }
178 
179 device_initcall(lpd270_irq_device_init);
180 #endif
181 
182 
183 static struct resource smc91x_resources[] = {
184 	[0] = {
185 		.start	= LPD270_ETH_PHYS,
186 		.end	= (LPD270_ETH_PHYS + 0xfffff),
187 		.flags	= IORESOURCE_MEM,
188 	},
189 	[1] = {
190 		.start	= LPD270_ETHERNET_IRQ,
191 		.end	= LPD270_ETHERNET_IRQ,
192 		.flags	= IORESOURCE_IRQ,
193 	},
194 };
195 
196 static struct platform_device smc91x_device = {
197 	.name		= "smc91x",
198 	.id		= 0,
199 	.num_resources	= ARRAY_SIZE(smc91x_resources),
200 	.resource	= smc91x_resources,
201 };
202 
203 static struct resource lpd270_flash_resources[] = {
204 	[0] = {
205 		.start	= PXA_CS0_PHYS,
206 		.end	= PXA_CS0_PHYS + SZ_64M - 1,
207 		.flags	= IORESOURCE_MEM,
208 	},
209 	[1] = {
210 		.start	= PXA_CS1_PHYS,
211 		.end	= PXA_CS1_PHYS + SZ_64M - 1,
212 		.flags	= IORESOURCE_MEM,
213 	},
214 };
215 
216 static struct mtd_partition lpd270_flash0_partitions[] = {
217 	{
218 		.name =		"Bootloader",
219 		.size =		0x00040000,
220 		.offset =	0,
221 		.mask_flags =	MTD_WRITEABLE  /* force read-only */
222 	}, {
223 		.name =		"Kernel",
224 		.size =		0x00400000,
225 		.offset =	0x00040000,
226 	}, {
227 		.name =		"Filesystem",
228 		.size =		MTDPART_SIZ_FULL,
229 		.offset =	0x00440000
230 	},
231 };
232 
233 static struct flash_platform_data lpd270_flash_data[2] = {
234 	{
235 		.name		= "processor-flash",
236 		.map_name	= "cfi_probe",
237 		.parts		= lpd270_flash0_partitions,
238 		.nr_parts	= ARRAY_SIZE(lpd270_flash0_partitions),
239 	}, {
240 		.name		= "mainboard-flash",
241 		.map_name	= "cfi_probe",
242 		.parts		= NULL,
243 		.nr_parts	= 0,
244 	}
245 };
246 
247 static struct platform_device lpd270_flash_device[2] = {
248 	{
249 		.name		= "pxa2xx-flash",
250 		.id		= 0,
251 		.dev = {
252 			.platform_data	= &lpd270_flash_data[0],
253 		},
254 		.resource	= &lpd270_flash_resources[0],
255 		.num_resources	= 1,
256 	}, {
257 		.name		= "pxa2xx-flash",
258 		.id		= 1,
259 		.dev = {
260 			.platform_data	= &lpd270_flash_data[1],
261 		},
262 		.resource	= &lpd270_flash_resources[1],
263 		.num_resources	= 1,
264 	},
265 };
266 
267 static struct platform_pwm_backlight_data lpd270_backlight_data = {
268 	.pwm_id		= 0,
269 	.max_brightness	= 1,
270 	.dft_brightness	= 1,
271 	.pwm_period_ns	= 78770,
272 	.enable_gpio	= -1,
273 };
274 
275 static struct platform_device lpd270_backlight_device = {
276 	.name		= "pwm-backlight",
277 	.dev		= {
278 		.parent	= &pxa27x_device_pwm0.dev,
279 		.platform_data = &lpd270_backlight_data,
280 	},
281 };
282 
283 /* 5.7" TFT QVGA (LoLo display number 1) */
284 static struct pxafb_mode_info sharp_lq057q3dc02_mode = {
285 	.pixclock		= 150000,
286 	.xres			= 320,
287 	.yres			= 240,
288 	.bpp			= 16,
289 	.hsync_len		= 0x14,
290 	.left_margin		= 0x28,
291 	.right_margin		= 0x0a,
292 	.vsync_len		= 0x02,
293 	.upper_margin		= 0x08,
294 	.lower_margin		= 0x14,
295 	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
296 };
297 
298 static struct pxafb_mach_info sharp_lq057q3dc02 = {
299 	.modes			= &sharp_lq057q3dc02_mode,
300 	.num_modes		= 1,
301 	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
302 				  LCD_ALTERNATE_MAPPING,
303 };
304 
305 /* 12.1" TFT SVGA (LoLo display number 2) */
306 static struct pxafb_mode_info sharp_lq121s1dg31_mode = {
307 	.pixclock		= 50000,
308 	.xres			= 800,
309 	.yres			= 600,
310 	.bpp			= 16,
311 	.hsync_len		= 0x05,
312 	.left_margin		= 0x52,
313 	.right_margin		= 0x05,
314 	.vsync_len		= 0x04,
315 	.upper_margin		= 0x14,
316 	.lower_margin		= 0x0a,
317 	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
318 };
319 
320 static struct pxafb_mach_info sharp_lq121s1dg31 = {
321 	.modes			= &sharp_lq121s1dg31_mode,
322 	.num_modes		= 1,
323 	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
324 				  LCD_ALTERNATE_MAPPING,
325 };
326 
327 /* 3.6" TFT QVGA (LoLo display number 3) */
328 static struct pxafb_mode_info sharp_lq036q1da01_mode = {
329 	.pixclock		= 150000,
330 	.xres			= 320,
331 	.yres			= 240,
332 	.bpp			= 16,
333 	.hsync_len		= 0x0e,
334 	.left_margin		= 0x04,
335 	.right_margin		= 0x0a,
336 	.vsync_len		= 0x03,
337 	.upper_margin		= 0x03,
338 	.lower_margin		= 0x03,
339 	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
340 };
341 
342 static struct pxafb_mach_info sharp_lq036q1da01 = {
343 	.modes			= &sharp_lq036q1da01_mode,
344 	.num_modes		= 1,
345 	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
346 				  LCD_ALTERNATE_MAPPING,
347 };
348 
349 /* 6.4" TFT VGA (LoLo display number 5) */
350 static struct pxafb_mode_info sharp_lq64d343_mode = {
351 	.pixclock		= 25000,
352 	.xres			= 640,
353 	.yres			= 480,
354 	.bpp			= 16,
355 	.hsync_len		= 0x31,
356 	.left_margin		= 0x89,
357 	.right_margin		= 0x19,
358 	.vsync_len		= 0x12,
359 	.upper_margin		= 0x22,
360 	.lower_margin		= 0x00,
361 	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
362 };
363 
364 static struct pxafb_mach_info sharp_lq64d343 = {
365 	.modes			= &sharp_lq64d343_mode,
366 	.num_modes		= 1,
367 	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
368 				  LCD_ALTERNATE_MAPPING,
369 };
370 
371 /* 10.4" TFT VGA (LoLo display number 7) */
372 static struct pxafb_mode_info sharp_lq10d368_mode = {
373 	.pixclock		= 25000,
374 	.xres			= 640,
375 	.yres			= 480,
376 	.bpp			= 16,
377 	.hsync_len		= 0x31,
378 	.left_margin		= 0x89,
379 	.right_margin		= 0x19,
380 	.vsync_len		= 0x12,
381 	.upper_margin		= 0x22,
382 	.lower_margin		= 0x00,
383 	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
384 };
385 
386 static struct pxafb_mach_info sharp_lq10d368 = {
387 	.modes			= &sharp_lq10d368_mode,
388 	.num_modes		= 1,
389 	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
390 				  LCD_ALTERNATE_MAPPING,
391 };
392 
393 /* 3.5" TFT QVGA (LoLo display number 8) */
394 static struct pxafb_mode_info sharp_lq035q7db02_20_mode = {
395 	.pixclock		= 150000,
396 	.xres			= 240,
397 	.yres			= 320,
398 	.bpp			= 16,
399 	.hsync_len		= 0x0e,
400 	.left_margin		= 0x0a,
401 	.right_margin		= 0x0a,
402 	.vsync_len		= 0x03,
403 	.upper_margin		= 0x05,
404 	.lower_margin		= 0x14,
405 	.sync			= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
406 };
407 
408 static struct pxafb_mach_info sharp_lq035q7db02_20 = {
409 	.modes			= &sharp_lq035q7db02_20_mode,
410 	.num_modes		= 1,
411 	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
412 				  LCD_ALTERNATE_MAPPING,
413 };
414 
415 static struct pxafb_mach_info *lpd270_lcd_to_use;
416 
lpd270_set_lcd(char * str)417 static int __init lpd270_set_lcd(char *str)
418 {
419 	if (!strncasecmp(str, "lq057q3dc02", 11)) {
420 		lpd270_lcd_to_use = &sharp_lq057q3dc02;
421 	} else if (!strncasecmp(str, "lq121s1dg31", 11)) {
422 		lpd270_lcd_to_use = &sharp_lq121s1dg31;
423 	} else if (!strncasecmp(str, "lq036q1da01", 11)) {
424 		lpd270_lcd_to_use = &sharp_lq036q1da01;
425 	} else if (!strncasecmp(str, "lq64d343", 8)) {
426 		lpd270_lcd_to_use = &sharp_lq64d343;
427 	} else if (!strncasecmp(str, "lq10d368", 8)) {
428 		lpd270_lcd_to_use = &sharp_lq10d368;
429 	} else if (!strncasecmp(str, "lq035q7db02-20", 14)) {
430 		lpd270_lcd_to_use = &sharp_lq035q7db02_20;
431 	} else {
432 		printk(KERN_INFO "lpd270: unknown lcd panel [%s]\n", str);
433 	}
434 
435 	return 1;
436 }
437 
438 __setup("lcd=", lpd270_set_lcd);
439 
440 static struct platform_device *platform_devices[] __initdata = {
441 	&smc91x_device,
442 	&lpd270_backlight_device,
443 	&lpd270_flash_device[0],
444 	&lpd270_flash_device[1],
445 };
446 
447 static struct pxaohci_platform_data lpd270_ohci_platform_data = {
448 	.port_mode	= PMM_PERPORT_MODE,
449 	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
450 };
451 
lpd270_init(void)452 static void __init lpd270_init(void)
453 {
454 	pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config));
455 
456 	pxa_set_ffuart_info(NULL);
457 	pxa_set_btuart_info(NULL);
458 	pxa_set_stuart_info(NULL);
459 
460 	lpd270_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
461 	lpd270_flash_data[1].width = 4;
462 
463 	/*
464 	 * System bus arbiter setting:
465 	 * - Core_Park
466 	 * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
467 	 */
468 	ARB_CNTRL = ARB_CORE_PARK | 0x234;
469 
470 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
471 
472 	pxa_set_ac97_info(NULL);
473 
474 	if (lpd270_lcd_to_use != NULL)
475 		pxa_set_fb_info(NULL, lpd270_lcd_to_use);
476 
477 	pxa_set_ohci_info(&lpd270_ohci_platform_data);
478 }
479 
480 
481 static struct map_desc lpd270_io_desc[] __initdata = {
482 	{
483 		.virtual	= (unsigned long)LPD270_CPLD_VIRT,
484 		.pfn		= __phys_to_pfn(LPD270_CPLD_PHYS),
485 		.length		= LPD270_CPLD_SIZE,
486 		.type		= MT_DEVICE,
487 	},
488 };
489 
lpd270_map_io(void)490 static void __init lpd270_map_io(void)
491 {
492 	pxa27x_map_io();
493 	iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
494 
495 	/* for use I SRAM as framebuffer.  */
496 	PSLR |= 0x00000F04;
497 	PCFR  = 0x00000066;
498 }
499 
500 MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
501 	/* Maintainer: Peter Barada */
502 	.atag_offset	= 0x100,
503 	.map_io		= lpd270_map_io,
504 	.nr_irqs	= LPD270_NR_IRQS,
505 	.init_irq	= lpd270_init_irq,
506 	.handle_irq	= pxa27x_handle_irq,
507 	.init_time	= pxa_timer_init,
508 	.init_machine	= lpd270_init,
509 	.restart	= pxa_restart,
510 MACHINE_END
511