• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  *  Support for Sharp SL-C6000x PDAs
3  *  Model: (Tosa)
4  *
5  *  Copyright (c) 2005 Dirk Opfer
6  *
7  *	Based on code written by Sharp/Lineo for 2.4 kernels
8  *
9  *  This program is free software; you can redistribute it and/or modify
10  *  it under the terms of the GNU General Public License version 2 as
11  *  published by the Free Software Foundation.
12  *
13  */
14 
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/platform_device.h>
18 #include <linux/major.h>
19 #include <linux/fs.h>
20 #include <linux/interrupt.h>
21 #include <linux/delay.h>
22 #include <linux/fb.h>
23 #include <linux/mmc/host.h>
24 #include <linux/mfd/tc6393xb.h>
25 #include <linux/mfd/tmio.h>
26 #include <linux/mtd/nand.h>
27 #include <linux/mtd/partitions.h>
28 #include <linux/mtd/physmap.h>
29 #include <linux/pm.h>
30 #include <linux/gpio_keys.h>
31 #include <linux/input.h>
32 #include <linux/gpio.h>
33 #include <linux/pda_power.h>
34 #include <linux/spi/spi.h>
35 #include <linux/spi/pxa2xx_spi.h>
36 #include <linux/input/matrix_keypad.h>
37 #include <linux/i2c/pxa-i2c.h>
38 #include <linux/usb/gpio_vbus.h>
39 #include <linux/reboot.h>
40 #include <linux/memblock.h>
41 
42 #include <asm/setup.h>
43 #include <asm/mach-types.h>
44 
45 #include <mach/pxa25x.h>
46 #include <mach/reset.h>
47 #include <linux/platform_data/irda-pxaficp.h>
48 #include <linux/platform_data/mmc-pxamci.h>
49 #include <mach/udc.h>
50 #include <mach/tosa_bt.h>
51 #include <mach/audio.h>
52 #include <mach/smemc.h>
53 
54 #include <asm/mach/arch.h>
55 #include <mach/tosa.h>
56 
57 #include <asm/hardware/scoop.h>
58 #include <asm/mach/sharpsl_param.h>
59 
60 #include "generic.h"
61 #include "clock.h"
62 #include "devices.h"
63 
64 static unsigned long tosa_pin_config[] = {
65 	GPIO78_nCS_2, /* Scoop */
66 	GPIO80_nCS_4, /* tg6393xb */
67 	GPIO33_nCS_5, /* Scoop */
68 
69 	// GPIO76 CARD_VCC_ON1
70 
71 	GPIO19_GPIO, /* Reset out */
72 	GPIO1_RST | WAKEUP_ON_EDGE_FALL,
73 
74 	GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* WAKE_UP */
75 	GPIO2_GPIO | WAKEUP_ON_EDGE_BOTH, /* AC_IN */
76 	GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* RECORD */
77 	GPIO4_GPIO | WAKEUP_ON_EDGE_FALL, /* SYNC */
78 	GPIO20_GPIO, /* EAR_IN */
79 	GPIO22_GPIO, /* On */
80 
81 	GPIO5_GPIO, /* USB_IN */
82 	GPIO32_GPIO, /* Pen IRQ */
83 
84 	GPIO7_GPIO, /* Jacket Detect */
85 	GPIO14_GPIO, /* BAT0_CRG */
86 	GPIO12_GPIO, /* BAT1_CRG */
87 	GPIO17_GPIO, /* BAT0_LOW */
88 	GPIO84_GPIO, /* BAT1_LOW */
89 	GPIO38_GPIO, /* BAT_LOCK */
90 
91 	GPIO11_3_6MHz,
92 	GPIO15_GPIO, /* TC6393XB IRQ */
93 	GPIO18_RDY,
94 	GPIO27_GPIO, /* LCD Sync */
95 
96 	/* MMC */
97 	GPIO6_MMC_CLK,
98 	GPIO8_MMC_CS0,
99 	GPIO9_GPIO, /* Detect */
100 	GPIO10_GPIO, /* nSD_INT */
101 
102 	/* CF */
103 	GPIO13_GPIO, /* CD_IRQ */
104 	GPIO21_GPIO, /* Main Slot IRQ */
105 	GPIO36_GPIO, /* Jacket Slot IRQ */
106 	GPIO48_nPOE,
107 	GPIO49_nPWE,
108 	GPIO50_nPIOR,
109 	GPIO51_nPIOW,
110 	GPIO52_nPCE_1,
111 	GPIO53_nPCE_2,
112 	GPIO54_nPSKTSEL,
113 	GPIO55_nPREG,
114 	GPIO56_nPWAIT,
115 	GPIO57_nIOIS16,
116 
117 	/* AC97 */
118 	GPIO31_AC97_SYNC,
119 	GPIO30_AC97_SDATA_OUT,
120 	GPIO28_AC97_BITCLK,
121 	GPIO29_AC97_SDATA_IN_0,
122 	// GPIO79 nAUD_IRQ
123 
124 	/* FFUART */
125 	GPIO34_FFUART_RXD,
126 	GPIO35_FFUART_CTS,
127 	GPIO37_FFUART_DSR,
128 	GPIO39_FFUART_TXD,
129 	GPIO40_FFUART_DTR,
130 	GPIO41_FFUART_RTS,
131 
132 	/* BTUART */
133 	GPIO42_BTUART_RXD,
134 	GPIO43_BTUART_TXD,
135 	GPIO44_BTUART_CTS,
136 	GPIO45_BTUART_RTS,
137 
138 	/* Keybd */
139 	GPIO58_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 0 */
140 	GPIO59_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 1 */
141 	GPIO60_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 2 */
142 	GPIO61_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 3 */
143 	GPIO62_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 4 */
144 	GPIO63_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 5 */
145 	GPIO64_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 6 */
146 	GPIO65_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 7 */
147 	GPIO66_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 8 */
148 	GPIO67_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 9 */
149 	GPIO68_GPIO | MFP_LPM_DRIVE_LOW,	/* Column 10 */
150 	GPIO69_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 0 */
151 	GPIO70_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 1 */
152 	GPIO71_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 2 */
153 	GPIO72_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 3 */
154 	GPIO73_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 4 */
155 	GPIO74_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 5 */
156 	GPIO75_GPIO | MFP_LPM_DRIVE_LOW,	/* Row 6 */
157 
158 	/* SPI */
159 	GPIO81_SSP2_CLK_OUT,
160 	GPIO82_SSP2_FRM_OUT,
161 	GPIO83_SSP2_TXD,
162 
163 	/* IrDA is managed in other way */
164 	GPIO46_GPIO,
165 	GPIO47_GPIO,
166 };
167 
168 /*
169  * SCOOP Device
170  */
171 static struct resource tosa_scoop_resources[] = {
172 	[0] = {
173 		.start	= TOSA_CF_PHYS,
174 		.end	= TOSA_CF_PHYS + 0xfff,
175 		.flags	= IORESOURCE_MEM,
176 	},
177 };
178 
179 static struct scoop_config tosa_scoop_setup = {
180 	.io_dir 	= TOSA_SCOOP_IO_DIR,
181 	.gpio_base	= TOSA_SCOOP_GPIO_BASE,
182 };
183 
184 static struct platform_device tosascoop_device = {
185 	.name		= "sharp-scoop",
186 	.id		= 0,
187 	.dev		= {
188  		.platform_data	= &tosa_scoop_setup,
189 	},
190 	.num_resources	= ARRAY_SIZE(tosa_scoop_resources),
191 	.resource	= tosa_scoop_resources,
192 };
193 
194 
195 /*
196  * SCOOP Device Jacket
197  */
198 static struct resource tosa_scoop_jc_resources[] = {
199 	[0] = {
200 		.start		= TOSA_SCOOP_PHYS + 0x40,
201 		.end		= TOSA_SCOOP_PHYS + 0xfff,
202 		.flags		= IORESOURCE_MEM,
203 	},
204 };
205 
206 static struct scoop_config tosa_scoop_jc_setup = {
207 	.io_dir 	= TOSA_SCOOP_JC_IO_DIR,
208 	.gpio_base	= TOSA_SCOOP_JC_GPIO_BASE,
209 };
210 
211 static struct platform_device tosascoop_jc_device = {
212 	.name		= "sharp-scoop",
213 	.id		= 1,
214 	.dev		= {
215  		.platform_data	= &tosa_scoop_jc_setup,
216 		.parent 	= &tosascoop_device.dev,
217 	},
218 	.num_resources	= ARRAY_SIZE(tosa_scoop_jc_resources),
219 	.resource	= tosa_scoop_jc_resources,
220 };
221 
222 /*
223  * PCMCIA
224  */
225 static struct scoop_pcmcia_dev tosa_pcmcia_scoop[] = {
226 {
227 	.dev        = &tosascoop_device.dev,
228 	.irq        = TOSA_IRQ_GPIO_CF_IRQ,
229 	.cd_irq     = TOSA_IRQ_GPIO_CF_CD,
230 	.cd_irq_str = "PCMCIA0 CD",
231 },{
232 	.dev        = &tosascoop_jc_device.dev,
233 	.irq        = TOSA_IRQ_GPIO_JC_CF_IRQ,
234 	.cd_irq     = -1,
235 },
236 };
237 
238 static struct scoop_pcmcia_config tosa_pcmcia_config = {
239 	.devs         = &tosa_pcmcia_scoop[0],
240 	.num_devs     = 2,
241 };
242 
243 /*
244  * USB Device Controller
245  */
246 static struct gpio_vbus_mach_info tosa_udc_info = {
247 	.gpio_pullup		= TOSA_GPIO_USB_PULLUP,
248 	.gpio_vbus		= TOSA_GPIO_USB_IN,
249 	.gpio_vbus_inverted	= 1,
250 };
251 
252 static struct platform_device tosa_gpio_vbus = {
253 	.name	= "gpio-vbus",
254 	.id	= -1,
255 	.dev	= {
256 		.platform_data	= &tosa_udc_info,
257 	},
258 };
259 
260 /*
261  * MMC/SD Device
262  */
tosa_mci_init(struct device * dev,irq_handler_t tosa_detect_int,void * data)263 static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void *data)
264 {
265 	int err;
266 
267 	err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int");
268 	if (err) {
269 		printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
270 		goto err_gpio_int;
271 	}
272 	err = gpio_direction_input(TOSA_GPIO_nSD_INT);
273 	if (err)
274 		goto err_gpio_int_dir;
275 
276 	return 0;
277 
278 err_gpio_int_dir:
279 	gpio_free(TOSA_GPIO_nSD_INT);
280 err_gpio_int:
281 	return err;
282 }
283 
tosa_mci_exit(struct device * dev,void * data)284 static void tosa_mci_exit(struct device *dev, void *data)
285 {
286 	gpio_free(TOSA_GPIO_nSD_INT);
287 }
288 
289 static struct pxamci_platform_data tosa_mci_platform_data = {
290 	.detect_delay_ms	= 250,
291 	.ocr_mask       	= MMC_VDD_32_33|MMC_VDD_33_34,
292 	.init           	= tosa_mci_init,
293 	.exit           	= tosa_mci_exit,
294 	.gpio_card_detect	= TOSA_GPIO_nSD_DETECT,
295 	.gpio_card_ro		= TOSA_GPIO_SD_WP,
296 	.gpio_power		= TOSA_GPIO_PWR_ON,
297 };
298 
299 /*
300  * Irda
301  */
tosa_irda_transceiver_mode(struct device * dev,int mode)302 static void tosa_irda_transceiver_mode(struct device *dev, int mode)
303 {
304 	if (mode & IR_OFF) {
305 		gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0);
306 		pxa2xx_transceiver_mode(dev, mode);
307 		gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
308 	} else {
309 		pxa2xx_transceiver_mode(dev, mode);
310 		gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1);
311 	}
312 }
313 
tosa_irda_startup(struct device * dev)314 static int tosa_irda_startup(struct device *dev)
315 {
316 	int ret;
317 
318 	ret = gpio_request(TOSA_GPIO_IRDA_TX, "IrDA TX");
319 	if (ret)
320 		goto err_tx;
321 	ret = gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
322 	if (ret)
323 		goto err_tx_dir;
324 
325 	ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown");
326 	if (ret)
327 		goto err_pwr;
328 
329 	ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0);
330 	if (ret)
331 		goto err_pwr_dir;
332 
333 	tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
334 
335 	return 0;
336 
337 err_pwr_dir:
338 	gpio_free(TOSA_GPIO_IR_POWERDWN);
339 err_pwr:
340 err_tx_dir:
341 	gpio_free(TOSA_GPIO_IRDA_TX);
342 err_tx:
343 	return ret;
344 }
345 
tosa_irda_shutdown(struct device * dev)346 static void tosa_irda_shutdown(struct device *dev)
347 {
348 	tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
349 	gpio_free(TOSA_GPIO_IR_POWERDWN);
350 	gpio_free(TOSA_GPIO_IRDA_TX);
351 }
352 
353 static struct pxaficp_platform_data tosa_ficp_platform_data = {
354 	.gpio_pwdown		= -1,
355 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
356 	.transceiver_mode	= tosa_irda_transceiver_mode,
357 	.startup		= tosa_irda_startup,
358 	.shutdown		= tosa_irda_shutdown,
359 };
360 
361 /*
362  * Tosa AC IN
363  */
tosa_power_init(struct device * dev)364 static int tosa_power_init(struct device *dev)
365 {
366 	int ret = gpio_request(TOSA_GPIO_AC_IN, "ac in");
367 	if (ret)
368 		goto err_gpio_req;
369 
370 	ret = gpio_direction_input(TOSA_GPIO_AC_IN);
371 	if (ret)
372 		goto err_gpio_in;
373 
374 	return 0;
375 
376 err_gpio_in:
377 	gpio_free(TOSA_GPIO_AC_IN);
378 err_gpio_req:
379 	return ret;
380 }
381 
tosa_power_exit(struct device * dev)382 static void tosa_power_exit(struct device *dev)
383 {
384 	gpio_free(TOSA_GPIO_AC_IN);
385 }
386 
tosa_power_ac_online(void)387 static int tosa_power_ac_online(void)
388 {
389 	return gpio_get_value(TOSA_GPIO_AC_IN) == 0;
390 }
391 
392 static char *tosa_ac_supplied_to[] = {
393 	"main-battery",
394 	"backup-battery",
395 	"jacket-battery",
396 };
397 
398 static struct pda_power_pdata tosa_power_data = {
399 	.init			= tosa_power_init,
400 	.is_ac_online		= tosa_power_ac_online,
401 	.exit			= tosa_power_exit,
402 	.supplied_to		= tosa_ac_supplied_to,
403 	.num_supplicants	= ARRAY_SIZE(tosa_ac_supplied_to),
404 };
405 
406 static struct resource tosa_power_resource[] = {
407 	{
408 		.name		= "ac",
409 		.start		= PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN),
410 		.end		= PXA_GPIO_TO_IRQ(TOSA_GPIO_AC_IN),
411 		.flags		= IORESOURCE_IRQ |
412 				  IORESOURCE_IRQ_HIGHEDGE |
413 				  IORESOURCE_IRQ_LOWEDGE,
414 	},
415 };
416 
417 static struct platform_device tosa_power_device = {
418 	.name			= "pda-power",
419 	.id			= -1,
420 	.dev.platform_data	= &tosa_power_data,
421 	.resource		= tosa_power_resource,
422 	.num_resources		= ARRAY_SIZE(tosa_power_resource),
423 };
424 
425 /*
426  * Tosa Keyboard
427  */
428 static const uint32_t tosakbd_keymap[] = {
429 	KEY(0, 1, KEY_W),
430 	KEY(0, 5, KEY_K),
431 	KEY(0, 6, KEY_BACKSPACE),
432 	KEY(0, 7, KEY_P),
433 	KEY(1, 0, KEY_Q),
434 	KEY(1, 1, KEY_E),
435 	KEY(1, 2, KEY_T),
436 	KEY(1, 3, KEY_Y),
437 	KEY(1, 5, KEY_O),
438 	KEY(1, 6, KEY_I),
439 	KEY(1, 7, KEY_COMMA),
440 	KEY(2, 0, KEY_A),
441 	KEY(2, 1, KEY_D),
442 	KEY(2, 2, KEY_G),
443 	KEY(2, 3, KEY_U),
444 	KEY(2, 5, KEY_L),
445 	KEY(2, 6, KEY_ENTER),
446 	KEY(2, 7, KEY_DOT),
447 	KEY(3, 0, KEY_Z),
448 	KEY(3, 1, KEY_C),
449 	KEY(3, 2, KEY_V),
450 	KEY(3, 3, KEY_J),
451 	KEY(3, 4, TOSA_KEY_ADDRESSBOOK),
452 	KEY(3, 5, TOSA_KEY_CANCEL),
453 	KEY(3, 6, TOSA_KEY_CENTER),
454 	KEY(3, 7, TOSA_KEY_OK),
455 	KEY(3, 8, KEY_LEFTSHIFT),
456 	KEY(4, 0, KEY_S),
457 	KEY(4, 1, KEY_R),
458 	KEY(4, 2, KEY_B),
459 	KEY(4, 3, KEY_N),
460 	KEY(4, 4, TOSA_KEY_CALENDAR),
461 	KEY(4, 5, TOSA_KEY_HOMEPAGE),
462 	KEY(4, 6, KEY_LEFTCTRL),
463 	KEY(4, 7, TOSA_KEY_LIGHT),
464 	KEY(4, 9, KEY_RIGHTSHIFT),
465 	KEY(5, 0, KEY_TAB),
466 	KEY(5, 1, KEY_SLASH),
467 	KEY(5, 2, KEY_H),
468 	KEY(5, 3, KEY_M),
469 	KEY(5, 4, TOSA_KEY_MENU),
470 	KEY(5, 6, KEY_UP),
471 	KEY(5, 10, TOSA_KEY_FN),
472 	KEY(6, 0, KEY_X),
473 	KEY(6, 1, KEY_F),
474 	KEY(6, 2, KEY_SPACE),
475 	KEY(6, 3, KEY_APOSTROPHE),
476 	KEY(6, 4, TOSA_KEY_MAIL),
477 	KEY(6, 5, KEY_LEFT),
478 	KEY(6, 6, KEY_DOWN),
479 	KEY(6, 7, KEY_RIGHT),
480 };
481 
482 static struct matrix_keymap_data tosakbd_keymap_data = {
483 	.keymap		= tosakbd_keymap,
484 	.keymap_size	= ARRAY_SIZE(tosakbd_keymap),
485 };
486 
487 static const int tosakbd_col_gpios[] =
488 			{ 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68 };
489 static const int tosakbd_row_gpios[] =
490 			{ 69, 70, 71, 72, 73, 74, 75 };
491 
492 static struct matrix_keypad_platform_data tosakbd_pdata = {
493 	.keymap_data		= &tosakbd_keymap_data,
494 	.row_gpios		= tosakbd_row_gpios,
495 	.col_gpios		= tosakbd_col_gpios,
496 	.num_row_gpios		= ARRAY_SIZE(tosakbd_row_gpios),
497 	.num_col_gpios		= ARRAY_SIZE(tosakbd_col_gpios),
498 	.col_scan_delay_us	= 10,
499 	.debounce_ms		= 10,
500 	.wakeup			= 1,
501 };
502 
503 static struct platform_device tosakbd_device = {
504 	.name		= "matrix-keypad",
505 	.id		= -1,
506 	.dev		= {
507 		.platform_data = &tosakbd_pdata,
508 	},
509 };
510 
511 static struct gpio_keys_button tosa_gpio_keys[] = {
512 	/*
513 	 * Two following keys are directly tied to "ON" button of tosa. Why?
514 	 * The first one can be used as a wakeup source, the second can't;
515 	 * also the first one is OR of ac_powered and on_button.
516 	 */
517 	{
518 		.type	= EV_PWR,
519 		.code	= KEY_RESERVED,
520 		.gpio	= TOSA_GPIO_POWERON,
521 		.desc	= "Poweron",
522 		.wakeup	= 1,
523 		.active_low = 1,
524 	},
525 	{
526 		.type	= EV_PWR,
527 		.code	= KEY_SUSPEND,
528 		.gpio	= TOSA_GPIO_ON_KEY,
529 		.desc	= "On key",
530 		/*
531 		 * can't be used as wakeup
532 		 * .wakeup	= 1,
533 		 */
534 		.active_low = 1,
535 	},
536 	{
537 		.type	= EV_KEY,
538 		.code	= TOSA_KEY_RECORD,
539 		.gpio	= TOSA_GPIO_RECORD_BTN,
540 		.desc	= "Record Button",
541 		.wakeup	= 1,
542 		.active_low = 1,
543 	},
544 	{
545 		.type	= EV_KEY,
546 		.code	= TOSA_KEY_SYNC,
547 		.gpio	= TOSA_GPIO_SYNC,
548 		.desc	= "Sync Button",
549 		.wakeup	= 1,
550 		.active_low = 1,
551 	},
552 	{
553 		.type	= EV_SW,
554 		.code	= SW_HEADPHONE_INSERT,
555 		.gpio	= TOSA_GPIO_EAR_IN,
556 		.desc	= "HeadPhone insert",
557 		.active_low = 1,
558 		.debounce_interval = 300,
559 	},
560 };
561 
562 static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = {
563 	.buttons	= tosa_gpio_keys,
564 	.nbuttons	= ARRAY_SIZE(tosa_gpio_keys),
565 };
566 
567 static struct platform_device tosa_gpio_keys_device = {
568 	.name	= "gpio-keys",
569 	.id	= -1,
570 	.dev	= {
571 		.platform_data	= &tosa_gpio_keys_platform_data,
572 	},
573 };
574 
575 /*
576  * Tosa LEDs
577  */
578 static struct gpio_led tosa_gpio_leds[] = {
579 	{
580 		.name			= "tosa:amber:charge",
581 		.default_trigger	= "main-battery-charging",
582 		.gpio			= TOSA_GPIO_CHRG_ERR_LED,
583 	},
584 	{
585 		.name			= "tosa:green:mail",
586 		.default_trigger	= "nand-disk",
587 		.gpio			= TOSA_GPIO_NOTE_LED,
588 	},
589 	{
590 		.name			= "tosa:dual:wlan",
591 		.default_trigger	= "none",
592 		.gpio			= TOSA_GPIO_WLAN_LED,
593 	},
594 	{
595 		.name			= "tosa:blue:bluetooth",
596 		.default_trigger	= "tosa-bt",
597 		.gpio			= TOSA_GPIO_BT_LED,
598 	},
599 };
600 
601 static struct gpio_led_platform_data tosa_gpio_leds_platform_data = {
602 	.leds		= tosa_gpio_leds,
603 	.num_leds	= ARRAY_SIZE(tosa_gpio_leds),
604 };
605 
606 static struct platform_device tosaled_device = {
607 	.name	= "leds-gpio",
608 	.id	= -1,
609 	.dev	= {
610 		.platform_data	= &tosa_gpio_leds_platform_data,
611 	},
612 };
613 
614 /*
615  * Toshiba Mobile IO Controller
616  */
617 static struct resource tc6393xb_resources[] = {
618 	[0] = {
619 		.start	= TOSA_LCDC_PHYS,
620 		.end	= TOSA_LCDC_PHYS + 0x3ffffff,
621 		.flags	= IORESOURCE_MEM,
622 	},
623 
624 	[1] = {
625 		.start	= TOSA_IRQ_GPIO_TC6393XB_INT,
626 		.end	= TOSA_IRQ_GPIO_TC6393XB_INT,
627 		.flags	= IORESOURCE_IRQ,
628 	},
629 };
630 
631 
tosa_tc6393xb_enable(struct platform_device * dev)632 static int tosa_tc6393xb_enable(struct platform_device *dev)
633 {
634 	int rc;
635 
636 	rc = gpio_request(TOSA_GPIO_TC6393XB_REST_IN, "tc6393xb #pclr");
637 	if (rc)
638 		goto err_req_pclr;
639 	rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend");
640 	if (rc)
641 		goto err_req_suspend;
642 	rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "tc6393xb l3v");
643 	if (rc)
644 		goto err_req_l3v;
645 	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0);
646 	if (rc)
647 		goto err_dir_l3v;
648 	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_SUSPEND, 0);
649 	if (rc)
650 		goto err_dir_suspend;
651 	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_REST_IN, 0);
652 	if (rc)
653 		goto err_dir_pclr;
654 
655 	mdelay(1);
656 
657 	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
658 
659 	mdelay(10);
660 
661 	gpio_set_value(TOSA_GPIO_TC6393XB_REST_IN, 1);
662 	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
663 
664 	return 0;
665 err_dir_pclr:
666 err_dir_suspend:
667 err_dir_l3v:
668 	gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
669 err_req_l3v:
670 	gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
671 err_req_suspend:
672 	gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
673 err_req_pclr:
674 	return rc;
675 }
676 
tosa_tc6393xb_disable(struct platform_device * dev)677 static int tosa_tc6393xb_disable(struct platform_device *dev)
678 {
679 	gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
680 	gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
681 	gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
682 
683 	return 0;
684 }
685 
tosa_tc6393xb_resume(struct platform_device * dev)686 static int tosa_tc6393xb_resume(struct platform_device *dev)
687 {
688 	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
689 	mdelay(10);
690 	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
691 	mdelay(10);
692 
693 	return 0;
694 }
695 
tosa_tc6393xb_suspend(struct platform_device * dev)696 static int tosa_tc6393xb_suspend(struct platform_device *dev)
697 {
698 	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 0);
699 	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 0);
700 	return 0;
701 }
702 
703 static struct mtd_partition tosa_nand_partition[] = {
704 	{
705 		.name	= "smf",
706 		.offset	= 0,
707 		.size	= 7 * 1024 * 1024,
708 	},
709 	{
710 		.name	= "root",
711 		.offset	= MTDPART_OFS_APPEND,
712 		.size	= 28 * 1024 * 1024,
713 	},
714 	{
715 		.name	= "home",
716 		.offset	= MTDPART_OFS_APPEND,
717 		.size	= MTDPART_SIZ_FULL,
718 	},
719 };
720 
721 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
722 
723 static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = {
724 	.options	= 0,
725 	.offs		= 4,
726 	.len		= 2,
727 	.pattern	= scan_ff_pattern
728 };
729 
730 static struct tmio_nand_data tosa_tc6393xb_nand_config = {
731 	.num_partitions	= ARRAY_SIZE(tosa_nand_partition),
732 	.partition	= tosa_nand_partition,
733 	.badblock_pattern = &tosa_tc6393xb_nand_bbt,
734 };
735 
tosa_tc6393xb_setup(struct platform_device * dev)736 static int tosa_tc6393xb_setup(struct platform_device *dev)
737 {
738 	int rc;
739 
740 	rc = gpio_request(TOSA_GPIO_CARD_VCC_ON, "CARD_VCC_ON");
741 	if (rc)
742 		goto err_req;
743 
744 	rc = gpio_direction_output(TOSA_GPIO_CARD_VCC_ON, 1);
745 	if (rc)
746 		goto err_dir;
747 
748 	return rc;
749 
750 err_dir:
751 	gpio_free(TOSA_GPIO_CARD_VCC_ON);
752 err_req:
753 	return rc;
754 }
755 
tosa_tc6393xb_teardown(struct platform_device * dev)756 static void tosa_tc6393xb_teardown(struct platform_device *dev)
757 {
758 	gpio_free(TOSA_GPIO_CARD_VCC_ON);
759 }
760 
761 #ifdef CONFIG_MFD_TC6393XB
762 static struct fb_videomode tosa_tc6393xb_lcd_mode[] = {
763 	{
764 		.xres = 480,
765 		.yres = 640,
766 		.pixclock = 0x002cdf00,/* PLL divisor */
767 		.left_margin = 0x004c,
768 		.right_margin = 0x005b,
769 		.upper_margin = 0x0001,
770 		.lower_margin = 0x000d,
771 		.hsync_len = 0x0002,
772 		.vsync_len = 0x0001,
773 		.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
774 		.vmode = FB_VMODE_NONINTERLACED,
775 	},{
776 		.xres = 240,
777 		.yres = 320,
778 		.pixclock = 0x00e7f203,/* PLL divisor */
779 		.left_margin = 0x0024,
780 		.right_margin = 0x002f,
781 		.upper_margin = 0x0001,
782 		.lower_margin = 0x000d,
783 		.hsync_len = 0x0002,
784 		.vsync_len = 0x0001,
785 		.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
786 		.vmode = FB_VMODE_NONINTERLACED,
787 	}
788 };
789 
790 static struct tmio_fb_data tosa_tc6393xb_fb_config = {
791 	.lcd_set_power	= tc6393xb_lcd_set_power,
792 	.lcd_mode	= tc6393xb_lcd_mode,
793 	.num_modes	= ARRAY_SIZE(tosa_tc6393xb_lcd_mode),
794 	.modes		= &tosa_tc6393xb_lcd_mode[0],
795 	.height		= 82,
796 	.width		= 60,
797 };
798 #endif
799 
800 static struct tc6393xb_platform_data tosa_tc6393xb_data = {
801 	.scr_pll2cr	= 0x0cc1,
802 	.scr_gper	= 0x3300,
803 
804 	.irq_base	= IRQ_BOARD_START,
805 	.gpio_base	= TOSA_TC6393XB_GPIO_BASE,
806 	.setup		= tosa_tc6393xb_setup,
807 	.teardown	= tosa_tc6393xb_teardown,
808 
809 	.enable		= tosa_tc6393xb_enable,
810 	.disable	= tosa_tc6393xb_disable,
811 	.suspend	= tosa_tc6393xb_suspend,
812 	.resume		= tosa_tc6393xb_resume,
813 
814 	.nand_data	= &tosa_tc6393xb_nand_config,
815 #ifdef CONFIG_MFD_TC6393XB
816 	.fb_data	= &tosa_tc6393xb_fb_config,
817 #endif
818 
819 	.resume_restore = 1,
820 };
821 
822 
823 static struct platform_device tc6393xb_device = {
824 	.name	= "tc6393xb",
825 	.id	= -1,
826 	.dev	= {
827 		.platform_data	= &tosa_tc6393xb_data,
828 	},
829 	.num_resources	= ARRAY_SIZE(tc6393xb_resources),
830 	.resource	= tc6393xb_resources,
831 };
832 
833 static struct tosa_bt_data tosa_bt_data = {
834 	.gpio_pwr	= TOSA_GPIO_BT_PWR_EN,
835 	.gpio_reset	= TOSA_GPIO_BT_RESET,
836 };
837 
838 static struct platform_device tosa_bt_device = {
839 	.name	= "tosa-bt",
840 	.id	= -1,
841 	.dev.platform_data = &tosa_bt_data,
842 };
843 
844 static struct pxa2xx_spi_master pxa_ssp_master_info = {
845 	.num_chipselect	= 1,
846 };
847 
848 static struct spi_board_info spi_board_info[] __initdata = {
849 	{
850 		.modalias	= "tosa-lcd",
851 		// .platform_data
852 		.max_speed_hz	= 28750,
853 		.bus_num	= 2,
854 		.chip_select	= 0,
855 		.mode		= SPI_MODE_0,
856 	},
857 };
858 
859 static struct mtd_partition sharpsl_rom_parts[] = {
860 	{
861 		.name	="Boot PROM Filesystem",
862 		.offset	= 0x00160000,
863 		.size	= MTDPART_SIZ_FULL,
864 	},
865 };
866 
867 static struct physmap_flash_data sharpsl_rom_data = {
868 	.width		= 2,
869 	.nr_parts	= ARRAY_SIZE(sharpsl_rom_parts),
870 	.parts		= sharpsl_rom_parts,
871 };
872 
873 static struct resource sharpsl_rom_resources[] = {
874 	{
875 		.start	= 0x00000000,
876 		.end	= 0x007fffff,
877 		.flags	= IORESOURCE_MEM,
878 	},
879 };
880 
881 static struct platform_device sharpsl_rom_device = {
882 	.name	= "physmap-flash",
883 	.id	= -1,
884 	.resource = sharpsl_rom_resources,
885 	.num_resources = ARRAY_SIZE(sharpsl_rom_resources),
886 	.dev.platform_data = &sharpsl_rom_data,
887 };
888 
889 static struct platform_device wm9712_device = {
890 	.name	= "wm9712-codec",
891 	.id	= -1,
892 };
893 
894 static struct platform_device tosa_audio_device = {
895 	.name	= "tosa-audio",
896 	.id	= -1,
897 };
898 
899 static struct platform_device *devices[] __initdata = {
900 	&tosascoop_device,
901 	&tosascoop_jc_device,
902 	&tc6393xb_device,
903 	&tosa_power_device,
904 	&tosakbd_device,
905 	&tosa_gpio_keys_device,
906 	&tosaled_device,
907 	&tosa_bt_device,
908 	&sharpsl_rom_device,
909 	&wm9712_device,
910 	&tosa_gpio_vbus,
911 	&tosa_audio_device,
912 };
913 
tosa_poweroff(void)914 static void tosa_poweroff(void)
915 {
916 	pxa_restart(REBOOT_GPIO, NULL);
917 }
918 
tosa_restart(enum reboot_mode mode,const char * cmd)919 static void tosa_restart(enum reboot_mode mode, const char *cmd)
920 {
921 	uint32_t msc0 = __raw_readl(MSC0);
922 
923 	/* Bootloader magic for a reboot */
924 	if((msc0 & 0xffff0000) == 0x7ff00000)
925 		__raw_writel((msc0 & 0xffff) | 0x7ee00000, MSC0);
926 
927 	tosa_poweroff();
928 }
929 
tosa_init(void)930 static void __init tosa_init(void)
931 {
932 	pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
933 
934 	pxa_set_ffuart_info(NULL);
935 	pxa_set_btuart_info(NULL);
936 	pxa_set_stuart_info(NULL);
937 
938 	gpio_set_wake(MFP_PIN_GPIO1, 1);
939 	/* We can't pass to gpio-keys since it will drop the Reset altfunc */
940 
941 	init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
942 
943 	pm_power_off = tosa_poweroff;
944 
945 	PCFR |= PCFR_OPDE;
946 
947 	/* enable batt_fault */
948 	PMCR = 0x01;
949 
950 	pxa_set_mci_info(&tosa_mci_platform_data);
951 	pxa_set_ficp_info(&tosa_ficp_platform_data);
952 	pxa_set_i2c_info(NULL);
953 	pxa_set_ac97_info(NULL);
954 	platform_scoop_config = &tosa_pcmcia_config;
955 
956 	pxa2xx_set_spi_info(2, &pxa_ssp_master_info);
957 	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
958 
959 	clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL);
960 
961 	platform_add_devices(devices, ARRAY_SIZE(devices));
962 }
963 
fixup_tosa(struct tag * tags,char ** cmdline)964 static void __init fixup_tosa(struct tag *tags, char **cmdline)
965 {
966 	sharpsl_save_param();
967 	memblock_add(0xa0000000, SZ_64M);
968 }
969 
970 MACHINE_START(TOSA, "SHARP Tosa")
971 	.fixup          = fixup_tosa,
972 	.map_io         = pxa25x_map_io,
973 	.nr_irqs	= TOSA_NR_IRQS,
974 	.init_irq       = pxa25x_init_irq,
975 	.handle_irq       = pxa25x_handle_irq,
976 	.init_machine   = tosa_init,
977 	.init_time	= pxa_timer_init,
978 	.restart	= tosa_restart,
979 MACHINE_END
980