1 /*
2 * marzen board support
3 *
4 * Copyright (C) 2011, 2013 Renesas Solutions Corp.
5 * Copyright (C) 2011 Magnus Damm
6 * Copyright (C) 2013 Cogent Embedded, Inc.
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; version 2 of the License.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
20 */
21
22 #include <linux/kernel.h>
23 #include <linux/init.h>
24 #include <linux/interrupt.h>
25 #include <linux/irq.h>
26 #include <linux/platform_device.h>
27 #include <linux/delay.h>
28 #include <linux/io.h>
29 #include <linux/leds.h>
30 #include <linux/dma-mapping.h>
31 #include <linux/pinctrl/machine.h>
32 #include <linux/platform_data/camera-rcar.h>
33 #include <linux/platform_data/gpio-rcar.h>
34 #include <linux/platform_data/rcar-du.h>
35 #include <linux/platform_data/usb-rcar-phy.h>
36 #include <linux/regulator/fixed.h>
37 #include <linux/regulator/machine.h>
38 #include <linux/smsc911x.h>
39 #include <linux/spi/spi.h>
40 #include <linux/spi/sh_hspi.h>
41 #include <linux/mmc/host.h>
42 #include <linux/mmc/sh_mobile_sdhi.h>
43 #include <linux/mfd/tmio.h>
44
45 #include <media/soc_camera.h>
46 #include <asm/mach-types.h>
47 #include <asm/mach/arch.h>
48 #include <asm/traps.h>
49
50 #include "common.h"
51 #include "irqs.h"
52 #include "r8a7779.h"
53
54 /* Fixed 3.3V regulator to be used by SDHI0 */
55 static struct regulator_consumer_supply fixed3v3_power_consumers[] = {
56 REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
57 REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
58 };
59
60 /* Dummy supplies, where voltage doesn't matter */
61 static struct regulator_consumer_supply dummy_supplies[] = {
62 REGULATOR_SUPPLY("vddvario", "smsc911x"),
63 REGULATOR_SUPPLY("vdd33a", "smsc911x"),
64 };
65
66 /* USB PHY */
67 static struct resource usb_phy_resources[] = {
68 [0] = {
69 .start = 0xffe70800,
70 .end = 0xffe70900 - 1,
71 .flags = IORESOURCE_MEM,
72 },
73 };
74
75 static struct rcar_phy_platform_data usb_phy_platform_data;
76
77 static struct platform_device usb_phy = {
78 .name = "rcar_usb_phy",
79 .id = -1,
80 .dev = {
81 .platform_data = &usb_phy_platform_data,
82 },
83 .resource = usb_phy_resources,
84 .num_resources = ARRAY_SIZE(usb_phy_resources),
85 };
86
87 /* SMSC LAN89218 */
88 static struct resource smsc911x_resources[] = {
89 [0] = {
90 .start = 0x18000000, /* ExCS0 */
91 .end = 0x180000ff, /* A1->A7 */
92 .flags = IORESOURCE_MEM,
93 },
94 [1] = {
95 .start = irq_pin(1), /* IRQ 1 */
96 .flags = IORESOURCE_IRQ,
97 },
98 };
99
100 static struct smsc911x_platform_config smsc911x_platdata = {
101 .flags = SMSC911X_USE_32BIT, /* 32-bit SW on 16-bit HW bus */
102 .phy_interface = PHY_INTERFACE_MODE_MII,
103 .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
104 .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
105 };
106
107 static struct platform_device eth_device = {
108 .name = "smsc911x",
109 .id = -1,
110 .dev = {
111 .platform_data = &smsc911x_platdata,
112 },
113 .resource = smsc911x_resources,
114 .num_resources = ARRAY_SIZE(smsc911x_resources),
115 };
116
117 static struct resource sdhi0_resources[] = {
118 [0] = {
119 .name = "sdhi0",
120 .start = 0xffe4c000,
121 .end = 0xffe4c0ff,
122 .flags = IORESOURCE_MEM,
123 },
124 [1] = {
125 .start = gic_iid(0x88),
126 .flags = IORESOURCE_IRQ,
127 },
128 };
129
130 static struct sh_mobile_sdhi_info sdhi0_platform_data = {
131 .dma_slave_tx = HPBDMA_SLAVE_SDHI0_TX,
132 .dma_slave_rx = HPBDMA_SLAVE_SDHI0_RX,
133 .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
134 .tmio_caps = MMC_CAP_SD_HIGHSPEED,
135 };
136
137 static struct platform_device sdhi0_device = {
138 .name = "sh_mobile_sdhi",
139 .num_resources = ARRAY_SIZE(sdhi0_resources),
140 .resource = sdhi0_resources,
141 .id = 0,
142 .dev = {
143 .platform_data = &sdhi0_platform_data,
144 }
145 };
146
147 /* Thermal */
148 static struct resource thermal_resources[] = {
149 [0] = {
150 .start = 0xFFC48000,
151 .end = 0xFFC48038 - 1,
152 .flags = IORESOURCE_MEM,
153 },
154 };
155
156 static struct platform_device thermal_device = {
157 .name = "rcar_thermal",
158 .resource = thermal_resources,
159 .num_resources = ARRAY_SIZE(thermal_resources),
160 };
161
162 /* HSPI */
163 static struct resource hspi_resources[] = {
164 [0] = {
165 .start = 0xFFFC7000,
166 .end = 0xFFFC7018 - 1,
167 .flags = IORESOURCE_MEM,
168 },
169 };
170
171 static struct platform_device hspi_device = {
172 .name = "sh-hspi",
173 .id = 0,
174 .resource = hspi_resources,
175 .num_resources = ARRAY_SIZE(hspi_resources),
176 };
177
178 /*
179 * DU
180 *
181 * The panel only specifies the [hv]display and [hv]total values. The position
182 * and width of the sync pulses don't matter, they're copied from VESA timings.
183 */
184 static struct rcar_du_encoder_data du_encoders[] = {
185 {
186 .type = RCAR_DU_ENCODER_VGA,
187 .output = RCAR_DU_OUTPUT_DPAD0,
188 }, {
189 .type = RCAR_DU_ENCODER_LVDS,
190 .output = RCAR_DU_OUTPUT_DPAD1,
191 .connector.lvds.panel = {
192 .width_mm = 210,
193 .height_mm = 158,
194 .mode = {
195 .pixelclock = 65000000,
196 .hactive = 1024,
197 .hfront_porch = 20,
198 .hback_porch = 160,
199 .hsync_len = 136,
200 .vactive = 768,
201 .vfront_porch = 3,
202 .vback_porch = 29,
203 .vsync_len = 6,
204 },
205 },
206 },
207 };
208
209 static const struct rcar_du_platform_data du_pdata __initconst = {
210 .encoders = du_encoders,
211 .num_encoders = ARRAY_SIZE(du_encoders),
212 };
213
214 static const struct resource du_resources[] __initconst = {
215 DEFINE_RES_MEM(0xfff80000, 0x40000),
216 DEFINE_RES_IRQ(gic_iid(0x3f)),
217 };
218
marzen_add_du_device(void)219 static void __init marzen_add_du_device(void)
220 {
221 struct platform_device_info info = {
222 .name = "rcar-du-r8a7779",
223 .id = -1,
224 .res = du_resources,
225 .num_res = ARRAY_SIZE(du_resources),
226 .data = &du_pdata,
227 .size_data = sizeof(du_pdata),
228 .dma_mask = DMA_BIT_MASK(32),
229 };
230
231 platform_device_register_full(&info);
232 }
233
234 /* LEDS */
235 static struct gpio_led marzen_leds[] = {
236 {
237 .name = "led2",
238 .gpio = RCAR_GP_PIN(4, 29),
239 .default_state = LEDS_GPIO_DEFSTATE_ON,
240 }, {
241 .name = "led3",
242 .gpio = RCAR_GP_PIN(4, 30),
243 .default_state = LEDS_GPIO_DEFSTATE_ON,
244 }, {
245 .name = "led4",
246 .gpio = RCAR_GP_PIN(4, 31),
247 .default_state = LEDS_GPIO_DEFSTATE_ON,
248 },
249 };
250
251 static struct gpio_led_platform_data marzen_leds_pdata = {
252 .leds = marzen_leds,
253 .num_leds = ARRAY_SIZE(marzen_leds),
254 };
255
256 static struct platform_device leds_device = {
257 .name = "leds-gpio",
258 .id = 0,
259 .dev = {
260 .platform_data = &marzen_leds_pdata,
261 },
262 };
263
264 /* VIN */
265 static struct rcar_vin_platform_data vin_platform_data __initdata = {
266 .flags = RCAR_VIN_BT656,
267 };
268
269 #define MARZEN_VIN(idx) \
270 static struct resource vin##idx##_resources[] __initdata = { \
271 DEFINE_RES_MEM(0xffc50000 + 0x1000 * (idx), 0x1000), \
272 DEFINE_RES_IRQ(gic_iid(0x5f + (idx))), \
273 }; \
274 \
275 static struct platform_device_info vin##idx##_info __initdata = { \
276 .name = "r8a7779-vin", \
277 .id = idx, \
278 .res = vin##idx##_resources, \
279 .num_res = ARRAY_SIZE(vin##idx##_resources), \
280 .dma_mask = DMA_BIT_MASK(32), \
281 .data = &vin_platform_data, \
282 .size_data = sizeof(vin_platform_data), \
283 }
284 MARZEN_VIN(1);
285 MARZEN_VIN(3);
286
287 #define MARZEN_CAMERA(idx) \
288 static struct i2c_board_info camera##idx##_info = { \
289 I2C_BOARD_INFO("adv7180", 0x20 + (idx)), \
290 }; \
291 \
292 static struct soc_camera_link iclink##idx##_adv7180 = { \
293 .bus_id = 1 + 2 * (idx), \
294 .i2c_adapter_id = 0, \
295 .board_info = &camera##idx##_info, \
296 }; \
297 \
298 static struct platform_device camera##idx##_device = { \
299 .name = "soc-camera-pdrv", \
300 .id = idx, \
301 .dev = { \
302 .platform_data = &iclink##idx##_adv7180, \
303 }, \
304 };
305
306 MARZEN_CAMERA(0);
307 MARZEN_CAMERA(1);
308
309 static struct platform_device *marzen_devices[] __initdata = {
310 ð_device,
311 &sdhi0_device,
312 &thermal_device,
313 &hspi_device,
314 &leds_device,
315 &usb_phy,
316 &camera0_device,
317 &camera1_device,
318 };
319
320 static const struct pinctrl_map marzen_pinctrl_map[] = {
321 /* DU (CN10: ARGB0, CN13: LVDS) */
322 PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
323 "du0_rgb888", "du0"),
324 PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
325 "du0_sync_1", "du0"),
326 PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
327 "du0_clk_out_0", "du0"),
328 PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
329 "du1_rgb666", "du1"),
330 PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
331 "du1_sync_1", "du1"),
332 PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7779", "pfc-r8a7779",
333 "du1_clk_out", "du1"),
334 /* HSPI0 */
335 PIN_MAP_MUX_GROUP_DEFAULT("sh-hspi.0", "pfc-r8a7779",
336 "hspi0", "hspi0"),
337 /* SCIF2 (CN18: DEBUG0) */
338 PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-r8a7779",
339 "scif2_data_c", "scif2"),
340 /* SCIF4 (CN19: DEBUG1) */
341 PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.4", "pfc-r8a7779",
342 "scif4_data", "scif4"),
343 /* SDHI0 */
344 PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
345 "sdhi0_data4", "sdhi0"),
346 PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
347 "sdhi0_ctrl", "sdhi0"),
348 PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779",
349 "sdhi0_cd", "sdhi0"),
350 /* SMSC */
351 PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
352 "intc_irq1_b", "intc"),
353 PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779",
354 "lbsc_ex_cs0", "lbsc"),
355 /* USB0 */
356 PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.0", "pfc-r8a7779",
357 "usb0", "usb0"),
358 /* USB1 */
359 PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.0", "pfc-r8a7779",
360 "usb1", "usb1"),
361 /* USB2 */
362 PIN_MAP_MUX_GROUP_DEFAULT("ehci-platform.1", "pfc-r8a7779",
363 "usb2", "usb2"),
364 /* VIN1 */
365 PIN_MAP_MUX_GROUP_DEFAULT("r8a7779-vin.1", "pfc-r8a7779",
366 "vin1_clk", "vin1"),
367 PIN_MAP_MUX_GROUP_DEFAULT("r8a7779-vin.1", "pfc-r8a7779",
368 "vin1_data8", "vin1"),
369 /* VIN3 */
370 PIN_MAP_MUX_GROUP_DEFAULT("r8a7779-vin.3", "pfc-r8a7779",
371 "vin3_clk", "vin3"),
372 PIN_MAP_MUX_GROUP_DEFAULT("r8a7779-vin.3", "pfc-r8a7779",
373 "vin3_data8", "vin3"),
374 };
375
marzen_init(void)376 static void __init marzen_init(void)
377 {
378 regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
379 ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
380 regulator_register_fixed(1, dummy_supplies,
381 ARRAY_SIZE(dummy_supplies));
382
383 pinctrl_register_mappings(marzen_pinctrl_map,
384 ARRAY_SIZE(marzen_pinctrl_map));
385 r8a7779_pinmux_init();
386 r8a7779_init_irq_extpin(1); /* IRQ1 as individual interrupt */
387
388 r8a7779_add_standard_devices();
389 platform_device_register_full(&vin1_info);
390 platform_device_register_full(&vin3_info);
391 platform_add_devices(marzen_devices, ARRAY_SIZE(marzen_devices));
392 marzen_add_du_device();
393 }
394
395 static const char *marzen_boards_compat_dt[] __initdata = {
396 "renesas,marzen",
397 NULL,
398 };
399
400 DT_MACHINE_START(MARZEN, "marzen")
401 .smp = smp_ops(r8a7779_smp_ops),
402 .map_io = r8a7779_map_io,
403 .init_early = r8a7779_add_early_devices,
404 .init_irq = r8a7779_init_irq_dt,
405 .init_machine = marzen_init,
406 .init_late = r8a7779_init_late,
407 .dt_compat = marzen_boards_compat_dt,
408 .init_time = r8a7779_earlytimer_init,
409 MACHINE_END
410