• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * This contain platform specific code for APM PPC460EX based Canyonlands
3  * board.
4  *
5  * Copyright (c) 2010, Applied Micro Circuits Corporation
6  * Author: Rupjyoti Sarmah <rsarmah@apm.com>
7  *
8  * This program is free software; you can redistribute it and/or
9  * modify it under the terms of the GNU General Public License as
10  * published by the Free Software Foundation; either version 2 of
11  * the License, or (at your option) any later version.
12  *
13  * This program is distributed in the hope that it will be useful,
14  * but WITHOUT ANY WARRANTY; without even the implied warranty of
15  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16  * GNU General Public License for more details.
17  *
18  * You should have received a copy of the GNU General Public License
19  * along with this program; if not, write to the Free Software
20  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21  * MA 02111-1307 USA
22  *
23  */
24 #include <linux/kernel.h>
25 #include <linux/init.h>
26 #include <asm/pci-bridge.h>
27 #include <asm/ppc4xx.h>
28 #include <asm/udbg.h>
29 #include <asm/uic.h>
30 #include <linux/of_platform.h>
31 #include <linux/delay.h>
32 #include "44x.h"
33 
34 #define BCSR_USB_EN	0x11
35 
36 static const struct of_device_id ppc460ex_of_bus[] __initconst = {
37 	{ .compatible = "ibm,plb4", },
38 	{ .compatible = "ibm,opb", },
39 	{ .compatible = "ibm,ebc", },
40 	{ .compatible = "simple-bus", },
41 	{},
42 };
43 
ppc460ex_device_probe(void)44 static int __init ppc460ex_device_probe(void)
45 {
46 	of_platform_bus_probe(NULL, ppc460ex_of_bus, NULL);
47 
48 	return 0;
49 }
50 machine_device_initcall(canyonlands, ppc460ex_device_probe);
51 
52 /* Using this code only for the Canyonlands board.  */
53 
ppc460ex_probe(void)54 static int __init ppc460ex_probe(void)
55 {
56 	unsigned long root = of_get_flat_dt_root();
57 	if (of_flat_dt_is_compatible(root, "amcc,canyonlands")) {
58 		pci_set_flags(PCI_REASSIGN_ALL_RSRC);
59 		return 1;
60 		}
61 	return 0;
62 }
63 
64 /* USB PHY fixup code on Canyonlands kit. */
65 
ppc460ex_canyonlands_fixup(void)66 static int __init ppc460ex_canyonlands_fixup(void)
67 {
68 	u8 __iomem *bcsr ;
69 	void __iomem *vaddr;
70 	struct device_node *np;
71 	int ret = 0;
72 
73 	np = of_find_compatible_node(NULL, NULL, "amcc,ppc460ex-bcsr");
74 	if (!np) {
75 		printk(KERN_ERR "failed did not find amcc, ppc460ex bcsr node\n");
76 		return -ENODEV;
77 	}
78 
79 	bcsr = of_iomap(np, 0);
80 	of_node_put(np);
81 
82 	if (!bcsr) {
83 		printk(KERN_CRIT "Could not remap bcsr\n");
84 		ret = -ENODEV;
85 		goto err_bcsr;
86 	}
87 
88 	np = of_find_compatible_node(NULL, NULL, "ibm,ppc4xx-gpio");
89 	if (!np) {
90 		printk(KERN_ERR "failed did not find ibm,ppc4xx-gpio node\n");
91 		return -ENODEV;
92 	}
93 
94 	vaddr = of_iomap(np, 0);
95 	of_node_put(np);
96 
97 	if (!vaddr) {
98 		printk(KERN_CRIT "Could not get gpio node address\n");
99 		ret = -ENODEV;
100 		goto err_gpio;
101 	}
102 	/* Disable USB, through the BCSR7 bits */
103 	setbits8(&bcsr[7], BCSR_USB_EN);
104 
105 	/* Wait for a while after reset */
106 	msleep(100);
107 
108 	/* Enable USB here */
109 	clrbits8(&bcsr[7], BCSR_USB_EN);
110 
111 	/*
112 	 * Configure multiplexed gpio16 and gpio19 as alternate1 output
113 	 * source after USB reset. In this configuration gpio16 will be
114 	 * USB2HStop and gpio19 will be USB2DStop. For more details refer to
115 	 * table 34-7 of PPC460EX user manual.
116 	 */
117 	setbits32((vaddr + GPIO0_OSRH), 0x42000000);
118 	setbits32((vaddr + GPIO0_TSRH), 0x42000000);
119 err_gpio:
120 	iounmap(vaddr);
121 err_bcsr:
122 	iounmap(bcsr);
123 	return ret;
124 }
125 machine_device_initcall(canyonlands, ppc460ex_canyonlands_fixup);
define_machine(canyonlands)126 define_machine(canyonlands) {
127 	.name = "Canyonlands",
128 	.probe = ppc460ex_probe,
129 	.progress = udbg_progress,
130 	.init_IRQ = uic_init_tree,
131 	.get_irq = uic_get_irq,
132 	.restart = ppc4xx_reset_system,
133 	.calibrate_decr = generic_calibrate_decr,
134 };
135