1 /*
2 *
3 * (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
4 *
5 * Extended 3 / 2005 by Hartmut Hackmann to support various
6 * cards with the tda10046 DVB-T channel decoder
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 */
22
23 #include <linux/init.h>
24 #include <linux/list.h>
25 #include <linux/module.h>
26 #include <linux/kernel.h>
27 #include <linux/delay.h>
28 #include <linux/kthread.h>
29 #include <linux/suspend.h>
30
31 #include "saa7134-reg.h"
32 #include "saa7134.h"
33 #include <media/v4l2-common.h>
34 #include "dvb-pll.h"
35 #include <dvb_frontend.h>
36
37 #include "mt352.h"
38 #include "mt352_priv.h" /* FIXME */
39 #include "tda1004x.h"
40 #include "nxt200x.h"
41 #include "tuner-xc2028.h"
42 #include "xc5000.h"
43
44 #include "tda10086.h"
45 #include "tda826x.h"
46 #include "tda827x.h"
47 #include "isl6421.h"
48 #include "isl6405.h"
49 #include "lnbp21.h"
50 #include "tuner-simple.h"
51 #include "tda10048.h"
52 #include "tda18271.h"
53 #include "lgdt3305.h"
54 #include "tda8290.h"
55 #include "mb86a20s.h"
56 #include "lgs8gxx.h"
57
58 #include "zl10353.h"
59 #include "qt1010.h"
60
61 #include "zl10036.h"
62 #include "zl10039.h"
63 #include "mt312.h"
64 #include "s5h1411.h"
65
66 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
67 MODULE_LICENSE("GPL");
68
69 static unsigned int antenna_pwr;
70
71 module_param(antenna_pwr, int, 0444);
72 MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)");
73
74 static int use_frontend;
75 module_param(use_frontend, int, 0644);
76 MODULE_PARM_DESC(use_frontend,"for cards with multiple frontends (0: terrestrial, 1: satellite)");
77
78 static int debug;
79 module_param(debug, int, 0644);
80 MODULE_PARM_DESC(debug, "Turn on/off module debugging (default:off).");
81
82 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
83
84 #define dprintk(fmt, arg...) do { if (debug) \
85 printk(KERN_DEBUG "%s/dvb: " fmt, dev->name , ## arg); } while(0)
86
87 /* Print a warning */
88 #define wprintk(fmt, arg...) \
89 printk(KERN_WARNING "%s/dvb: " fmt, dev->name, ## arg)
90
91 /* ------------------------------------------------------------------
92 * mt352 based DVB-T cards
93 */
94
pinnacle_antenna_pwr(struct saa7134_dev * dev,int on)95 static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on)
96 {
97 u32 ok;
98
99 if (!on) {
100 saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26));
101 saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
102 return 0;
103 }
104
105 saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26));
106 saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
107 udelay(10);
108
109 saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 28));
110 saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28));
111 udelay(10);
112 saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28));
113 udelay(10);
114 ok = saa_readl(SAA7134_GPIO_GPSTATUS0) & (1 << 27);
115 dprintk("%s %s\n", __func__, ok ? "on" : "off");
116
117 if (!ok)
118 saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26));
119 return ok;
120 }
121
mt352_pinnacle_init(struct dvb_frontend * fe)122 static int mt352_pinnacle_init(struct dvb_frontend* fe)
123 {
124 static u8 clock_config [] = { CLOCK_CTL, 0x3d, 0x28 };
125 static u8 reset [] = { RESET, 0x80 };
126 static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
127 static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 };
128 static u8 capt_range_cfg[] = { CAPT_RANGE, 0x31 };
129 static u8 fsm_ctl_cfg[] = { 0x7b, 0x04 };
130 static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x0f };
131 static u8 scan_ctl_cfg [] = { SCAN_CTL, 0x0d };
132 static u8 irq_cfg [] = { INTERRUPT_EN_0, 0x00, 0x00, 0x00, 0x00 };
133 struct saa7134_dev *dev= fe->dvb->priv;
134
135 dprintk("%s called\n", __func__);
136
137 mt352_write(fe, clock_config, sizeof(clock_config));
138 udelay(200);
139 mt352_write(fe, reset, sizeof(reset));
140 mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
141 mt352_write(fe, agc_cfg, sizeof(agc_cfg));
142 mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
143 mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg));
144
145 mt352_write(fe, fsm_ctl_cfg, sizeof(fsm_ctl_cfg));
146 mt352_write(fe, scan_ctl_cfg, sizeof(scan_ctl_cfg));
147 mt352_write(fe, irq_cfg, sizeof(irq_cfg));
148
149 return 0;
150 }
151
mt352_aver777_init(struct dvb_frontend * fe)152 static int mt352_aver777_init(struct dvb_frontend* fe)
153 {
154 static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d };
155 static u8 reset [] = { RESET, 0x80 };
156 static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
157 static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 };
158 static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 };
159
160 mt352_write(fe, clock_config, sizeof(clock_config));
161 udelay(200);
162 mt352_write(fe, reset, sizeof(reset));
163 mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
164 mt352_write(fe, agc_cfg, sizeof(agc_cfg));
165 mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
166
167 return 0;
168 }
169
mt352_avermedia_xc3028_init(struct dvb_frontend * fe)170 static int mt352_avermedia_xc3028_init(struct dvb_frontend *fe)
171 {
172 static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d };
173 static u8 reset [] = { RESET, 0x80 };
174 static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 };
175 static u8 agc_cfg [] = { AGC_TARGET, 0xe };
176 static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 };
177
178 mt352_write(fe, clock_config, sizeof(clock_config));
179 udelay(200);
180 mt352_write(fe, reset, sizeof(reset));
181 mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg));
182 mt352_write(fe, agc_cfg, sizeof(agc_cfg));
183 mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
184 return 0;
185 }
186
mt352_pinnacle_tuner_set_params(struct dvb_frontend * fe)187 static int mt352_pinnacle_tuner_set_params(struct dvb_frontend *fe)
188 {
189 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
190 u8 off[] = { 0x00, 0xf1};
191 u8 on[] = { 0x00, 0x71};
192 struct i2c_msg msg = {.addr=0x43, .flags=0, .buf=off, .len = sizeof(off)};
193
194 struct saa7134_dev *dev = fe->dvb->priv;
195 struct v4l2_frequency f;
196
197 /* set frequency (mt2050) */
198 f.tuner = 0;
199 f.type = V4L2_TUNER_DIGITAL_TV;
200 f.frequency = c->frequency / 1000 * 16 / 1000;
201 if (fe->ops.i2c_gate_ctrl)
202 fe->ops.i2c_gate_ctrl(fe, 1);
203 i2c_transfer(&dev->i2c_adap, &msg, 1);
204 saa_call_all(dev, tuner, s_frequency, &f);
205 msg.buf = on;
206 if (fe->ops.i2c_gate_ctrl)
207 fe->ops.i2c_gate_ctrl(fe, 1);
208 i2c_transfer(&dev->i2c_adap, &msg, 1);
209
210 pinnacle_antenna_pwr(dev, antenna_pwr);
211
212 /* mt352 setup */
213 return mt352_pinnacle_init(fe);
214 }
215
216 static struct mt352_config pinnacle_300i = {
217 .demod_address = 0x3c >> 1,
218 .adc_clock = 20333,
219 .if2 = 36150,
220 .no_tuner = 1,
221 .demod_init = mt352_pinnacle_init,
222 };
223
224 static struct mt352_config avermedia_777 = {
225 .demod_address = 0xf,
226 .demod_init = mt352_aver777_init,
227 };
228
229 static struct mt352_config avermedia_xc3028_mt352_dev = {
230 .demod_address = (0x1e >> 1),
231 .no_tuner = 1,
232 .demod_init = mt352_avermedia_xc3028_init,
233 };
234
235 static struct tda18271_std_map mb86a20s_tda18271_std_map = {
236 .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4,
237 .if_lvl = 7, .rfagc_top = 0x37, },
238 };
239
240 static struct tda18271_config kworld_tda18271_config = {
241 .std_map = &mb86a20s_tda18271_std_map,
242 .gate = TDA18271_GATE_DIGITAL,
243 .config = 3, /* Use tuner callback for AGC */
244
245 };
246
247 static const struct mb86a20s_config kworld_mb86a20s_config = {
248 .demod_address = 0x10,
249 };
250
kworld_sbtvd_gate_ctrl(struct dvb_frontend * fe,int enable)251 static int kworld_sbtvd_gate_ctrl(struct dvb_frontend* fe, int enable)
252 {
253 struct saa7134_dev *dev = fe->dvb->priv;
254
255 unsigned char initmsg[] = {0x45, 0x97};
256 unsigned char msg_enable[] = {0x45, 0xc1};
257 unsigned char msg_disable[] = {0x45, 0x81};
258 struct i2c_msg msg = {.addr = 0x4b, .flags = 0, .buf = initmsg, .len = 2};
259
260 if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) {
261 wprintk("could not access the I2C gate\n");
262 return -EIO;
263 }
264 if (enable)
265 msg.buf = msg_enable;
266 else
267 msg.buf = msg_disable;
268 if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) {
269 wprintk("could not access the I2C gate\n");
270 return -EIO;
271 }
272 msleep(20);
273 return 0;
274 }
275
276 /* ==================================================================
277 * tda1004x based DVB-T cards, helper functions
278 */
279
philips_tda1004x_request_firmware(struct dvb_frontend * fe,const struct firmware ** fw,char * name)280 static int philips_tda1004x_request_firmware(struct dvb_frontend *fe,
281 const struct firmware **fw, char *name)
282 {
283 struct saa7134_dev *dev = fe->dvb->priv;
284 return request_firmware(fw, name, &dev->pci->dev);
285 }
286
287 /* ------------------------------------------------------------------
288 * these tuners are tu1216, td1316(a)
289 */
290
philips_tda6651_pll_set(struct dvb_frontend * fe)291 static int philips_tda6651_pll_set(struct dvb_frontend *fe)
292 {
293 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
294 struct saa7134_dev *dev = fe->dvb->priv;
295 struct tda1004x_state *state = fe->demodulator_priv;
296 u8 addr = state->config->tuner_address;
297 u8 tuner_buf[4];
298 struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tuner_buf,.len =
299 sizeof(tuner_buf) };
300 int tuner_frequency = 0;
301 u8 band, cp, filter;
302
303 /* determine charge pump */
304 tuner_frequency = c->frequency + 36166000;
305 if (tuner_frequency < 87000000)
306 return -EINVAL;
307 else if (tuner_frequency < 130000000)
308 cp = 3;
309 else if (tuner_frequency < 160000000)
310 cp = 5;
311 else if (tuner_frequency < 200000000)
312 cp = 6;
313 else if (tuner_frequency < 290000000)
314 cp = 3;
315 else if (tuner_frequency < 420000000)
316 cp = 5;
317 else if (tuner_frequency < 480000000)
318 cp = 6;
319 else if (tuner_frequency < 620000000)
320 cp = 3;
321 else if (tuner_frequency < 830000000)
322 cp = 5;
323 else if (tuner_frequency < 895000000)
324 cp = 7;
325 else
326 return -EINVAL;
327
328 /* determine band */
329 if (c->frequency < 49000000)
330 return -EINVAL;
331 else if (c->frequency < 161000000)
332 band = 1;
333 else if (c->frequency < 444000000)
334 band = 2;
335 else if (c->frequency < 861000000)
336 band = 4;
337 else
338 return -EINVAL;
339
340 /* setup PLL filter */
341 switch (c->bandwidth_hz) {
342 case 6000000:
343 filter = 0;
344 break;
345
346 case 7000000:
347 filter = 0;
348 break;
349
350 case 8000000:
351 filter = 1;
352 break;
353
354 default:
355 return -EINVAL;
356 }
357
358 /* calculate divisor
359 * ((36166000+((1000000/6)/2)) + Finput)/(1000000/6)
360 */
361 tuner_frequency = (((c->frequency / 1000) * 6) + 217496) / 1000;
362
363 /* setup tuner buffer */
364 tuner_buf[0] = (tuner_frequency >> 8) & 0x7f;
365 tuner_buf[1] = tuner_frequency & 0xff;
366 tuner_buf[2] = 0xca;
367 tuner_buf[3] = (cp << 5) | (filter << 3) | band;
368
369 if (fe->ops.i2c_gate_ctrl)
370 fe->ops.i2c_gate_ctrl(fe, 1);
371 if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) {
372 wprintk("could not write to tuner at addr: 0x%02x\n",
373 addr << 1);
374 return -EIO;
375 }
376 msleep(1);
377 return 0;
378 }
379
philips_tu1216_init(struct dvb_frontend * fe)380 static int philips_tu1216_init(struct dvb_frontend *fe)
381 {
382 struct saa7134_dev *dev = fe->dvb->priv;
383 struct tda1004x_state *state = fe->demodulator_priv;
384 u8 addr = state->config->tuner_address;
385 static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab };
386 struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) };
387
388 /* setup PLL configuration */
389 if (fe->ops.i2c_gate_ctrl)
390 fe->ops.i2c_gate_ctrl(fe, 1);
391 if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1)
392 return -EIO;
393 msleep(1);
394
395 return 0;
396 }
397
398 /* ------------------------------------------------------------------ */
399
400 static struct tda1004x_config philips_tu1216_60_config = {
401 .demod_address = 0x8,
402 .invert = 1,
403 .invert_oclk = 0,
404 .xtal_freq = TDA10046_XTAL_4M,
405 .agc_config = TDA10046_AGC_DEFAULT,
406 .if_freq = TDA10046_FREQ_3617,
407 .tuner_address = 0x60,
408 .request_firmware = philips_tda1004x_request_firmware
409 };
410
411 static struct tda1004x_config philips_tu1216_61_config = {
412
413 .demod_address = 0x8,
414 .invert = 1,
415 .invert_oclk = 0,
416 .xtal_freq = TDA10046_XTAL_4M,
417 .agc_config = TDA10046_AGC_DEFAULT,
418 .if_freq = TDA10046_FREQ_3617,
419 .tuner_address = 0x61,
420 .request_firmware = philips_tda1004x_request_firmware
421 };
422
423 /* ------------------------------------------------------------------ */
424
philips_td1316_tuner_init(struct dvb_frontend * fe)425 static int philips_td1316_tuner_init(struct dvb_frontend *fe)
426 {
427 struct saa7134_dev *dev = fe->dvb->priv;
428 struct tda1004x_state *state = fe->demodulator_priv;
429 u8 addr = state->config->tuner_address;
430 static u8 msg[] = { 0x0b, 0xf5, 0x86, 0xab };
431 struct i2c_msg init_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) };
432
433 /* setup PLL configuration */
434 if (fe->ops.i2c_gate_ctrl)
435 fe->ops.i2c_gate_ctrl(fe, 1);
436 if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1)
437 return -EIO;
438 return 0;
439 }
440
philips_td1316_tuner_set_params(struct dvb_frontend * fe)441 static int philips_td1316_tuner_set_params(struct dvb_frontend *fe)
442 {
443 return philips_tda6651_pll_set(fe);
444 }
445
philips_td1316_tuner_sleep(struct dvb_frontend * fe)446 static int philips_td1316_tuner_sleep(struct dvb_frontend *fe)
447 {
448 struct saa7134_dev *dev = fe->dvb->priv;
449 struct tda1004x_state *state = fe->demodulator_priv;
450 u8 addr = state->config->tuner_address;
451 static u8 msg[] = { 0x0b, 0xdc, 0x86, 0xa4 };
452 struct i2c_msg analog_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) };
453
454 /* switch the tuner to analog mode */
455 if (fe->ops.i2c_gate_ctrl)
456 fe->ops.i2c_gate_ctrl(fe, 1);
457 if (i2c_transfer(&dev->i2c_adap, &analog_msg, 1) != 1)
458 return -EIO;
459 return 0;
460 }
461
462 /* ------------------------------------------------------------------ */
463
philips_europa_tuner_init(struct dvb_frontend * fe)464 static int philips_europa_tuner_init(struct dvb_frontend *fe)
465 {
466 struct saa7134_dev *dev = fe->dvb->priv;
467 static u8 msg[] = { 0x00, 0x40};
468 struct i2c_msg init_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) };
469
470
471 if (philips_td1316_tuner_init(fe))
472 return -EIO;
473 msleep(1);
474 if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1)
475 return -EIO;
476
477 return 0;
478 }
479
philips_europa_tuner_sleep(struct dvb_frontend * fe)480 static int philips_europa_tuner_sleep(struct dvb_frontend *fe)
481 {
482 struct saa7134_dev *dev = fe->dvb->priv;
483
484 static u8 msg[] = { 0x00, 0x14 };
485 struct i2c_msg analog_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) };
486
487 if (philips_td1316_tuner_sleep(fe))
488 return -EIO;
489
490 /* switch the board to analog mode */
491 if (fe->ops.i2c_gate_ctrl)
492 fe->ops.i2c_gate_ctrl(fe, 1);
493 i2c_transfer(&dev->i2c_adap, &analog_msg, 1);
494 return 0;
495 }
496
philips_europa_demod_sleep(struct dvb_frontend * fe)497 static int philips_europa_demod_sleep(struct dvb_frontend *fe)
498 {
499 struct saa7134_dev *dev = fe->dvb->priv;
500
501 if (dev->original_demod_sleep)
502 dev->original_demod_sleep(fe);
503 fe->ops.i2c_gate_ctrl(fe, 1);
504 return 0;
505 }
506
507 static struct tda1004x_config philips_europa_config = {
508
509 .demod_address = 0x8,
510 .invert = 0,
511 .invert_oclk = 0,
512 .xtal_freq = TDA10046_XTAL_4M,
513 .agc_config = TDA10046_AGC_IFO_AUTO_POS,
514 .if_freq = TDA10046_FREQ_052,
515 .tuner_address = 0x61,
516 .request_firmware = philips_tda1004x_request_firmware
517 };
518
519 static struct tda1004x_config medion_cardbus = {
520 .demod_address = 0x08,
521 .invert = 1,
522 .invert_oclk = 0,
523 .xtal_freq = TDA10046_XTAL_16M,
524 .agc_config = TDA10046_AGC_IFO_AUTO_NEG,
525 .if_freq = TDA10046_FREQ_3613,
526 .tuner_address = 0x61,
527 .request_firmware = philips_tda1004x_request_firmware
528 };
529
530 static struct tda1004x_config technotrend_budget_t3000_config = {
531 .demod_address = 0x8,
532 .invert = 1,
533 .invert_oclk = 0,
534 .xtal_freq = TDA10046_XTAL_4M,
535 .agc_config = TDA10046_AGC_DEFAULT,
536 .if_freq = TDA10046_FREQ_3617,
537 .tuner_address = 0x63,
538 .request_firmware = philips_tda1004x_request_firmware
539 };
540
541 /* ------------------------------------------------------------------
542 * tda 1004x based cards with philips silicon tuner
543 */
544
tda8290_i2c_gate_ctrl(struct dvb_frontend * fe,int enable)545 static int tda8290_i2c_gate_ctrl( struct dvb_frontend* fe, int enable)
546 {
547 struct tda1004x_state *state = fe->demodulator_priv;
548
549 u8 addr = state->config->i2c_gate;
550 static u8 tda8290_close[] = { 0x21, 0xc0};
551 static u8 tda8290_open[] = { 0x21, 0x80};
552 struct i2c_msg tda8290_msg = {.addr = addr,.flags = 0, .len = 2};
553 if (enable) {
554 tda8290_msg.buf = tda8290_close;
555 } else {
556 tda8290_msg.buf = tda8290_open;
557 }
558 if (i2c_transfer(state->i2c, &tda8290_msg, 1) != 1) {
559 struct saa7134_dev *dev = fe->dvb->priv;
560 wprintk("could not access tda8290 I2C gate\n");
561 return -EIO;
562 }
563 msleep(20);
564 return 0;
565 }
566
philips_tda827x_tuner_init(struct dvb_frontend * fe)567 static int philips_tda827x_tuner_init(struct dvb_frontend *fe)
568 {
569 struct saa7134_dev *dev = fe->dvb->priv;
570 struct tda1004x_state *state = fe->demodulator_priv;
571
572 switch (state->config->antenna_switch) {
573 case 0: break;
574 case 1: dprintk("setting GPIO21 to 0 (TV antenna?)\n");
575 saa7134_set_gpio(dev, 21, 0);
576 break;
577 case 2: dprintk("setting GPIO21 to 1 (Radio antenna?)\n");
578 saa7134_set_gpio(dev, 21, 1);
579 break;
580 }
581 return 0;
582 }
583
philips_tda827x_tuner_sleep(struct dvb_frontend * fe)584 static int philips_tda827x_tuner_sleep(struct dvb_frontend *fe)
585 {
586 struct saa7134_dev *dev = fe->dvb->priv;
587 struct tda1004x_state *state = fe->demodulator_priv;
588
589 switch (state->config->antenna_switch) {
590 case 0: break;
591 case 1: dprintk("setting GPIO21 to 1 (Radio antenna?)\n");
592 saa7134_set_gpio(dev, 21, 1);
593 break;
594 case 2: dprintk("setting GPIO21 to 0 (TV antenna?)\n");
595 saa7134_set_gpio(dev, 21, 0);
596 break;
597 }
598 return 0;
599 }
600
configure_tda827x_fe(struct saa7134_dev * dev,struct tda1004x_config * cdec_conf,struct tda827x_config * tuner_conf)601 static int configure_tda827x_fe(struct saa7134_dev *dev,
602 struct tda1004x_config *cdec_conf,
603 struct tda827x_config *tuner_conf)
604 {
605 struct vb2_dvb_frontend *fe0;
606
607 /* Get the first frontend */
608 fe0 = vb2_dvb_get_frontend(&dev->frontends, 1);
609
610 if (!fe0)
611 return -EINVAL;
612
613 fe0->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, &dev->i2c_adap);
614 if (fe0->dvb.frontend) {
615 if (cdec_conf->i2c_gate)
616 fe0->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
617 if (dvb_attach(tda827x_attach, fe0->dvb.frontend,
618 cdec_conf->tuner_address,
619 &dev->i2c_adap, tuner_conf))
620 return 0;
621
622 wprintk("no tda827x tuner found at addr: %02x\n",
623 cdec_conf->tuner_address);
624 }
625 return -EINVAL;
626 }
627
628 /* ------------------------------------------------------------------ */
629
630 static struct tda827x_config tda827x_cfg_0 = {
631 .init = philips_tda827x_tuner_init,
632 .sleep = philips_tda827x_tuner_sleep,
633 .config = 0,
634 .switch_addr = 0
635 };
636
637 static struct tda827x_config tda827x_cfg_1 = {
638 .init = philips_tda827x_tuner_init,
639 .sleep = philips_tda827x_tuner_sleep,
640 .config = 1,
641 .switch_addr = 0x4b
642 };
643
644 static struct tda827x_config tda827x_cfg_2 = {
645 .init = philips_tda827x_tuner_init,
646 .sleep = philips_tda827x_tuner_sleep,
647 .config = 2,
648 .switch_addr = 0x4b
649 };
650
651 static struct tda827x_config tda827x_cfg_2_sw42 = {
652 .init = philips_tda827x_tuner_init,
653 .sleep = philips_tda827x_tuner_sleep,
654 .config = 2,
655 .switch_addr = 0x42
656 };
657
658 /* ------------------------------------------------------------------ */
659
660 static struct tda1004x_config tda827x_lifeview_config = {
661 .demod_address = 0x08,
662 .invert = 1,
663 .invert_oclk = 0,
664 .xtal_freq = TDA10046_XTAL_16M,
665 .agc_config = TDA10046_AGC_TDA827X,
666 .gpio_config = TDA10046_GP11_I,
667 .if_freq = TDA10046_FREQ_045,
668 .tuner_address = 0x60,
669 .request_firmware = philips_tda1004x_request_firmware
670 };
671
672 static struct tda1004x_config philips_tiger_config = {
673 .demod_address = 0x08,
674 .invert = 1,
675 .invert_oclk = 0,
676 .xtal_freq = TDA10046_XTAL_16M,
677 .agc_config = TDA10046_AGC_TDA827X,
678 .gpio_config = TDA10046_GP11_I,
679 .if_freq = TDA10046_FREQ_045,
680 .i2c_gate = 0x4b,
681 .tuner_address = 0x61,
682 .antenna_switch= 1,
683 .request_firmware = philips_tda1004x_request_firmware
684 };
685
686 static struct tda1004x_config cinergy_ht_config = {
687 .demod_address = 0x08,
688 .invert = 1,
689 .invert_oclk = 0,
690 .xtal_freq = TDA10046_XTAL_16M,
691 .agc_config = TDA10046_AGC_TDA827X,
692 .gpio_config = TDA10046_GP01_I,
693 .if_freq = TDA10046_FREQ_045,
694 .i2c_gate = 0x4b,
695 .tuner_address = 0x61,
696 .request_firmware = philips_tda1004x_request_firmware
697 };
698
699 static struct tda1004x_config cinergy_ht_pci_config = {
700 .demod_address = 0x08,
701 .invert = 1,
702 .invert_oclk = 0,
703 .xtal_freq = TDA10046_XTAL_16M,
704 .agc_config = TDA10046_AGC_TDA827X,
705 .gpio_config = TDA10046_GP01_I,
706 .if_freq = TDA10046_FREQ_045,
707 .i2c_gate = 0x4b,
708 .tuner_address = 0x60,
709 .request_firmware = philips_tda1004x_request_firmware
710 };
711
712 static struct tda1004x_config philips_tiger_s_config = {
713 .demod_address = 0x08,
714 .invert = 1,
715 .invert_oclk = 0,
716 .xtal_freq = TDA10046_XTAL_16M,
717 .agc_config = TDA10046_AGC_TDA827X,
718 .gpio_config = TDA10046_GP01_I,
719 .if_freq = TDA10046_FREQ_045,
720 .i2c_gate = 0x4b,
721 .tuner_address = 0x61,
722 .antenna_switch= 1,
723 .request_firmware = philips_tda1004x_request_firmware
724 };
725
726 static struct tda1004x_config pinnacle_pctv_310i_config = {
727 .demod_address = 0x08,
728 .invert = 1,
729 .invert_oclk = 0,
730 .xtal_freq = TDA10046_XTAL_16M,
731 .agc_config = TDA10046_AGC_TDA827X,
732 .gpio_config = TDA10046_GP11_I,
733 .if_freq = TDA10046_FREQ_045,
734 .i2c_gate = 0x4b,
735 .tuner_address = 0x61,
736 .request_firmware = philips_tda1004x_request_firmware
737 };
738
739 static struct tda1004x_config hauppauge_hvr_1110_config = {
740 .demod_address = 0x08,
741 .invert = 1,
742 .invert_oclk = 0,
743 .xtal_freq = TDA10046_XTAL_16M,
744 .agc_config = TDA10046_AGC_TDA827X,
745 .gpio_config = TDA10046_GP11_I,
746 .if_freq = TDA10046_FREQ_045,
747 .i2c_gate = 0x4b,
748 .tuner_address = 0x61,
749 .request_firmware = philips_tda1004x_request_firmware
750 };
751
752 static struct tda1004x_config asus_p7131_dual_config = {
753 .demod_address = 0x08,
754 .invert = 1,
755 .invert_oclk = 0,
756 .xtal_freq = TDA10046_XTAL_16M,
757 .agc_config = TDA10046_AGC_TDA827X,
758 .gpio_config = TDA10046_GP11_I,
759 .if_freq = TDA10046_FREQ_045,
760 .i2c_gate = 0x4b,
761 .tuner_address = 0x61,
762 .antenna_switch= 2,
763 .request_firmware = philips_tda1004x_request_firmware
764 };
765
766 static struct tda1004x_config lifeview_trio_config = {
767 .demod_address = 0x09,
768 .invert = 1,
769 .invert_oclk = 0,
770 .xtal_freq = TDA10046_XTAL_16M,
771 .agc_config = TDA10046_AGC_TDA827X,
772 .gpio_config = TDA10046_GP00_I,
773 .if_freq = TDA10046_FREQ_045,
774 .tuner_address = 0x60,
775 .request_firmware = philips_tda1004x_request_firmware
776 };
777
778 static struct tda1004x_config tevion_dvbt220rf_config = {
779 .demod_address = 0x08,
780 .invert = 1,
781 .invert_oclk = 0,
782 .xtal_freq = TDA10046_XTAL_16M,
783 .agc_config = TDA10046_AGC_TDA827X,
784 .gpio_config = TDA10046_GP11_I,
785 .if_freq = TDA10046_FREQ_045,
786 .tuner_address = 0x60,
787 .request_firmware = philips_tda1004x_request_firmware
788 };
789
790 static struct tda1004x_config md8800_dvbt_config = {
791 .demod_address = 0x08,
792 .invert = 1,
793 .invert_oclk = 0,
794 .xtal_freq = TDA10046_XTAL_16M,
795 .agc_config = TDA10046_AGC_TDA827X,
796 .gpio_config = TDA10046_GP01_I,
797 .if_freq = TDA10046_FREQ_045,
798 .i2c_gate = 0x4b,
799 .tuner_address = 0x60,
800 .request_firmware = philips_tda1004x_request_firmware
801 };
802
803 static struct tda1004x_config asus_p7131_4871_config = {
804 .demod_address = 0x08,
805 .invert = 1,
806 .invert_oclk = 0,
807 .xtal_freq = TDA10046_XTAL_16M,
808 .agc_config = TDA10046_AGC_TDA827X,
809 .gpio_config = TDA10046_GP01_I,
810 .if_freq = TDA10046_FREQ_045,
811 .i2c_gate = 0x4b,
812 .tuner_address = 0x61,
813 .antenna_switch= 2,
814 .request_firmware = philips_tda1004x_request_firmware
815 };
816
817 static struct tda1004x_config asus_p7131_hybrid_lna_config = {
818 .demod_address = 0x08,
819 .invert = 1,
820 .invert_oclk = 0,
821 .xtal_freq = TDA10046_XTAL_16M,
822 .agc_config = TDA10046_AGC_TDA827X,
823 .gpio_config = TDA10046_GP11_I,
824 .if_freq = TDA10046_FREQ_045,
825 .i2c_gate = 0x4b,
826 .tuner_address = 0x61,
827 .antenna_switch= 2,
828 .request_firmware = philips_tda1004x_request_firmware
829 };
830
831 static struct tda1004x_config kworld_dvb_t_210_config = {
832 .demod_address = 0x08,
833 .invert = 1,
834 .invert_oclk = 0,
835 .xtal_freq = TDA10046_XTAL_16M,
836 .agc_config = TDA10046_AGC_TDA827X,
837 .gpio_config = TDA10046_GP11_I,
838 .if_freq = TDA10046_FREQ_045,
839 .i2c_gate = 0x4b,
840 .tuner_address = 0x61,
841 .antenna_switch= 1,
842 .request_firmware = philips_tda1004x_request_firmware
843 };
844
845 static struct tda1004x_config avermedia_super_007_config = {
846 .demod_address = 0x08,
847 .invert = 1,
848 .invert_oclk = 0,
849 .xtal_freq = TDA10046_XTAL_16M,
850 .agc_config = TDA10046_AGC_TDA827X,
851 .gpio_config = TDA10046_GP01_I,
852 .if_freq = TDA10046_FREQ_045,
853 .i2c_gate = 0x4b,
854 .tuner_address = 0x60,
855 .antenna_switch= 1,
856 .request_firmware = philips_tda1004x_request_firmware
857 };
858
859 static struct tda1004x_config twinhan_dtv_dvb_3056_config = {
860 .demod_address = 0x08,
861 .invert = 1,
862 .invert_oclk = 0,
863 .xtal_freq = TDA10046_XTAL_16M,
864 .agc_config = TDA10046_AGC_TDA827X,
865 .gpio_config = TDA10046_GP01_I,
866 .if_freq = TDA10046_FREQ_045,
867 .i2c_gate = 0x42,
868 .tuner_address = 0x61,
869 .antenna_switch = 1,
870 .request_firmware = philips_tda1004x_request_firmware
871 };
872
873 static struct tda1004x_config asus_tiger_3in1_config = {
874 .demod_address = 0x0b,
875 .invert = 1,
876 .invert_oclk = 0,
877 .xtal_freq = TDA10046_XTAL_16M,
878 .agc_config = TDA10046_AGC_TDA827X,
879 .gpio_config = TDA10046_GP11_I,
880 .if_freq = TDA10046_FREQ_045,
881 .i2c_gate = 0x4b,
882 .tuner_address = 0x61,
883 .antenna_switch = 1,
884 .request_firmware = philips_tda1004x_request_firmware
885 };
886
887 static struct tda1004x_config asus_ps3_100_config = {
888 .demod_address = 0x0b,
889 .invert = 1,
890 .invert_oclk = 0,
891 .xtal_freq = TDA10046_XTAL_16M,
892 .agc_config = TDA10046_AGC_TDA827X,
893 .gpio_config = TDA10046_GP11_I,
894 .if_freq = TDA10046_FREQ_045,
895 .i2c_gate = 0x4b,
896 .tuner_address = 0x61,
897 .antenna_switch = 1,
898 .request_firmware = philips_tda1004x_request_firmware
899 };
900
901 /* ------------------------------------------------------------------
902 * special case: this card uses saa713x GPIO22 for the mode switch
903 */
904
ads_duo_tuner_init(struct dvb_frontend * fe)905 static int ads_duo_tuner_init(struct dvb_frontend *fe)
906 {
907 struct saa7134_dev *dev = fe->dvb->priv;
908 philips_tda827x_tuner_init(fe);
909 /* route TDA8275a AGC input to the channel decoder */
910 saa7134_set_gpio(dev, 22, 1);
911 return 0;
912 }
913
ads_duo_tuner_sleep(struct dvb_frontend * fe)914 static int ads_duo_tuner_sleep(struct dvb_frontend *fe)
915 {
916 struct saa7134_dev *dev = fe->dvb->priv;
917 /* route TDA8275a AGC input to the analog IF chip*/
918 saa7134_set_gpio(dev, 22, 0);
919 philips_tda827x_tuner_sleep(fe);
920 return 0;
921 }
922
923 static struct tda827x_config ads_duo_cfg = {
924 .init = ads_duo_tuner_init,
925 .sleep = ads_duo_tuner_sleep,
926 .config = 0
927 };
928
929 static struct tda1004x_config ads_tech_duo_config = {
930 .demod_address = 0x08,
931 .invert = 1,
932 .invert_oclk = 0,
933 .xtal_freq = TDA10046_XTAL_16M,
934 .agc_config = TDA10046_AGC_TDA827X,
935 .gpio_config = TDA10046_GP00_I,
936 .if_freq = TDA10046_FREQ_045,
937 .tuner_address = 0x61,
938 .request_firmware = philips_tda1004x_request_firmware
939 };
940
941 static struct zl10353_config behold_h6_config = {
942 .demod_address = 0x1e>>1,
943 .no_tuner = 1,
944 .parallel_ts = 1,
945 .disable_i2c_gate_ctrl = 1,
946 };
947
948 static struct xc5000_config behold_x7_tunerconfig = {
949 .i2c_address = 0xc2>>1,
950 .if_khz = 4560,
951 .radio_input = XC5000_RADIO_FM1,
952 };
953
954 static struct zl10353_config behold_x7_config = {
955 .demod_address = 0x1e>>1,
956 .if2 = 45600,
957 .no_tuner = 1,
958 .parallel_ts = 1,
959 .disable_i2c_gate_ctrl = 1,
960 };
961
962 static struct zl10353_config videomate_t750_zl10353_config = {
963 .demod_address = 0x0f,
964 .no_tuner = 1,
965 .parallel_ts = 1,
966 .disable_i2c_gate_ctrl = 1,
967 };
968
969 static struct qt1010_config videomate_t750_qt1010_config = {
970 .i2c_address = 0x62
971 };
972
973
974 /* ==================================================================
975 * tda10086 based DVB-S cards, helper functions
976 */
977
978 static struct tda10086_config flydvbs = {
979 .demod_address = 0x0e,
980 .invert = 0,
981 .diseqc_tone = 0,
982 .xtal_freq = TDA10086_XTAL_16M,
983 };
984
985 static struct tda10086_config sd1878_4m = {
986 .demod_address = 0x0e,
987 .invert = 0,
988 .diseqc_tone = 0,
989 .xtal_freq = TDA10086_XTAL_4M,
990 };
991
992 /* ------------------------------------------------------------------
993 * special case: lnb supply is connected to the gated i2c
994 */
995
md8800_set_voltage(struct dvb_frontend * fe,fe_sec_voltage_t voltage)996 static int md8800_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
997 {
998 int res = -EIO;
999 struct saa7134_dev *dev = fe->dvb->priv;
1000 if (fe->ops.i2c_gate_ctrl) {
1001 fe->ops.i2c_gate_ctrl(fe, 1);
1002 if (dev->original_set_voltage)
1003 res = dev->original_set_voltage(fe, voltage);
1004 fe->ops.i2c_gate_ctrl(fe, 0);
1005 }
1006 return res;
1007 };
1008
md8800_set_high_voltage(struct dvb_frontend * fe,long arg)1009 static int md8800_set_high_voltage(struct dvb_frontend *fe, long arg)
1010 {
1011 int res = -EIO;
1012 struct saa7134_dev *dev = fe->dvb->priv;
1013 if (fe->ops.i2c_gate_ctrl) {
1014 fe->ops.i2c_gate_ctrl(fe, 1);
1015 if (dev->original_set_high_voltage)
1016 res = dev->original_set_high_voltage(fe, arg);
1017 fe->ops.i2c_gate_ctrl(fe, 0);
1018 }
1019 return res;
1020 };
1021
md8800_set_voltage2(struct dvb_frontend * fe,fe_sec_voltage_t voltage)1022 static int md8800_set_voltage2(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
1023 {
1024 struct saa7134_dev *dev = fe->dvb->priv;
1025 u8 wbuf[2] = { 0x1f, 00 };
1026 u8 rbuf;
1027 struct i2c_msg msg[] = { { .addr = 0x08, .flags = 0, .buf = wbuf, .len = 1 },
1028 { .addr = 0x08, .flags = I2C_M_RD, .buf = &rbuf, .len = 1 } };
1029
1030 if (i2c_transfer(&dev->i2c_adap, msg, 2) != 2)
1031 return -EIO;
1032 /* NOTE: this assumes that gpo1 is used, it might be bit 5 (gpo2) */
1033 if (voltage == SEC_VOLTAGE_18)
1034 wbuf[1] = rbuf | 0x10;
1035 else
1036 wbuf[1] = rbuf & 0xef;
1037 msg[0].len = 2;
1038 i2c_transfer(&dev->i2c_adap, msg, 1);
1039 return 0;
1040 }
1041
md8800_set_high_voltage2(struct dvb_frontend * fe,long arg)1042 static int md8800_set_high_voltage2(struct dvb_frontend *fe, long arg)
1043 {
1044 struct saa7134_dev *dev = fe->dvb->priv;
1045 wprintk("%s: sorry can't set high LNB supply voltage from here\n", __func__);
1046 return -EIO;
1047 }
1048
1049 /* ==================================================================
1050 * nxt200x based ATSC cards, helper functions
1051 */
1052
1053 static struct nxt200x_config avertvhda180 = {
1054 .demod_address = 0x0a,
1055 };
1056
1057 static struct nxt200x_config kworldatsc110 = {
1058 .demod_address = 0x0a,
1059 };
1060
1061 /* ------------------------------------------------------------------ */
1062
1063 static struct mt312_config avertv_a700_mt312 = {
1064 .demod_address = 0x0e,
1065 .voltage_inverted = 1,
1066 };
1067
1068 static struct zl10036_config avertv_a700_tuner = {
1069 .tuner_address = 0x60,
1070 };
1071
1072 static struct mt312_config zl10313_compro_s350_config = {
1073 .demod_address = 0x0e,
1074 };
1075
1076 static struct mt312_config zl10313_avermedia_a706_config = {
1077 .demod_address = 0x0e,
1078 };
1079
1080 static struct lgdt3305_config hcw_lgdt3305_config = {
1081 .i2c_addr = 0x0e,
1082 .mpeg_mode = LGDT3305_MPEG_SERIAL,
1083 .tpclk_edge = LGDT3305_TPCLK_RISING_EDGE,
1084 .tpvalid_polarity = LGDT3305_TP_VALID_HIGH,
1085 .deny_i2c_rptr = 1,
1086 .spectral_inversion = 1,
1087 .qam_if_khz = 4000,
1088 .vsb_if_khz = 3250,
1089 };
1090
1091 static struct tda10048_config hcw_tda10048_config = {
1092 .demod_address = 0x10 >> 1,
1093 .output_mode = TDA10048_SERIAL_OUTPUT,
1094 .fwbulkwritelen = TDA10048_BULKWRITE_200,
1095 .inversion = TDA10048_INVERSION_ON,
1096 .dtv6_if_freq_khz = TDA10048_IF_3300,
1097 .dtv7_if_freq_khz = TDA10048_IF_3500,
1098 .dtv8_if_freq_khz = TDA10048_IF_4000,
1099 .clk_freq_khz = TDA10048_CLK_16000,
1100 .disable_gate_access = 1,
1101 };
1102
1103 static struct tda18271_std_map hauppauge_tda18271_std_map = {
1104 .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4,
1105 .if_lvl = 1, .rfagc_top = 0x58, },
1106 .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5,
1107 .if_lvl = 1, .rfagc_top = 0x58, },
1108 };
1109
1110 static struct tda18271_config hcw_tda18271_config = {
1111 .std_map = &hauppauge_tda18271_std_map,
1112 .gate = TDA18271_GATE_ANALOG,
1113 .config = 3,
1114 .output_opt = TDA18271_OUTPUT_LT_OFF,
1115 };
1116
1117 static struct tda829x_config tda829x_no_probe = {
1118 .probe_tuner = TDA829X_DONT_PROBE,
1119 };
1120
1121 static struct tda10048_config zolid_tda10048_config = {
1122 .demod_address = 0x10 >> 1,
1123 .output_mode = TDA10048_PARALLEL_OUTPUT,
1124 .fwbulkwritelen = TDA10048_BULKWRITE_200,
1125 .inversion = TDA10048_INVERSION_ON,
1126 .dtv6_if_freq_khz = TDA10048_IF_3300,
1127 .dtv7_if_freq_khz = TDA10048_IF_3500,
1128 .dtv8_if_freq_khz = TDA10048_IF_4000,
1129 .clk_freq_khz = TDA10048_CLK_16000,
1130 .disable_gate_access = 1,
1131 };
1132
1133 static struct tda18271_config zolid_tda18271_config = {
1134 .gate = TDA18271_GATE_ANALOG,
1135 };
1136
1137 static struct tda10048_config dtv1000s_tda10048_config = {
1138 .demod_address = 0x10 >> 1,
1139 .output_mode = TDA10048_PARALLEL_OUTPUT,
1140 .fwbulkwritelen = TDA10048_BULKWRITE_200,
1141 .inversion = TDA10048_INVERSION_ON,
1142 .dtv6_if_freq_khz = TDA10048_IF_3300,
1143 .dtv7_if_freq_khz = TDA10048_IF_3800,
1144 .dtv8_if_freq_khz = TDA10048_IF_4300,
1145 .clk_freq_khz = TDA10048_CLK_16000,
1146 .disable_gate_access = 1,
1147 };
1148
1149 static struct tda18271_std_map dtv1000s_tda18271_std_map = {
1150 .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4,
1151 .if_lvl = 1, .rfagc_top = 0x37, },
1152 .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5,
1153 .if_lvl = 1, .rfagc_top = 0x37, },
1154 .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6,
1155 .if_lvl = 1, .rfagc_top = 0x37, },
1156 };
1157
1158 static struct tda18271_config dtv1000s_tda18271_config = {
1159 .std_map = &dtv1000s_tda18271_std_map,
1160 .gate = TDA18271_GATE_ANALOG,
1161 };
1162
1163 static struct lgs8gxx_config prohdtv_pro2_lgs8g75_config = {
1164 .prod = LGS8GXX_PROD_LGS8G75,
1165 .demod_address = 0x1d,
1166 .serial_ts = 0,
1167 .ts_clk_pol = 1,
1168 .ts_clk_gated = 0,
1169 .if_clk_freq = 30400, /* 30.4 MHz */
1170 .if_freq = 4000, /* 4.00 MHz */
1171 .if_neg_center = 0,
1172 .ext_adc = 0,
1173 .adc_signed = 1,
1174 .adc_vpp = 3, /* 2.0 Vpp */
1175 .if_neg_edge = 1,
1176 };
1177
1178 static struct tda18271_config prohdtv_pro2_tda18271_config = {
1179 .gate = TDA18271_GATE_ANALOG,
1180 .output_opt = TDA18271_OUTPUT_LT_OFF,
1181 };
1182
1183 static struct tda18271_std_map kworld_tda18271_std_map = {
1184 .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 3,
1185 .if_lvl = 6, .rfagc_top = 0x37 },
1186 .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0,
1187 .if_lvl = 6, .rfagc_top = 0x37 },
1188 };
1189
1190 static struct tda18271_config kworld_pc150u_tda18271_config = {
1191 .std_map = &kworld_tda18271_std_map,
1192 .gate = TDA18271_GATE_ANALOG,
1193 .output_opt = TDA18271_OUTPUT_LT_OFF,
1194 .config = 3, /* Use tuner callback for AGC */
1195 .rf_cal_on_startup = 1
1196 };
1197
1198 static struct s5h1411_config kworld_s5h1411_config = {
1199 .output_mode = S5H1411_PARALLEL_OUTPUT,
1200 .gpio = S5H1411_GPIO_OFF,
1201 .qam_if = S5H1411_IF_4000,
1202 .vsb_if = S5H1411_IF_3250,
1203 .inversion = S5H1411_INVERSION_ON,
1204 .status_mode = S5H1411_DEMODLOCKING,
1205 .mpeg_timing =
1206 S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK,
1207 };
1208
1209
1210 /* ==================================================================
1211 * Core code
1212 */
1213
dvb_init(struct saa7134_dev * dev)1214 static int dvb_init(struct saa7134_dev *dev)
1215 {
1216 int ret;
1217 int attach_xc3028 = 0;
1218 struct vb2_dvb_frontend *fe0;
1219 struct vb2_queue *q;
1220
1221 /* FIXME: add support for multi-frontend */
1222 mutex_init(&dev->frontends.lock);
1223 INIT_LIST_HEAD(&dev->frontends.felist);
1224
1225 printk(KERN_INFO "%s() allocating 1 frontend\n", __func__);
1226 fe0 = vb2_dvb_alloc_frontend(&dev->frontends, 1);
1227 if (!fe0) {
1228 printk(KERN_ERR "%s() failed to alloc\n", __func__);
1229 return -ENOMEM;
1230 }
1231
1232 /* init struct vb2_dvb */
1233 dev->ts.nr_bufs = 32;
1234 dev->ts.nr_packets = 32*4;
1235 fe0->dvb.name = dev->name;
1236 q = &fe0->dvb.dvbq;
1237 q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
1238 q->io_modes = VB2_MMAP | VB2_READ;
1239 q->drv_priv = &dev->ts_q;
1240 q->ops = &saa7134_ts_qops;
1241 q->mem_ops = &vb2_dma_sg_memops;
1242 q->buf_struct_size = sizeof(struct saa7134_buf);
1243 q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
1244 q->lock = &dev->lock;
1245 ret = vb2_queue_init(q);
1246 if (ret) {
1247 vb2_dvb_dealloc_frontends(&dev->frontends);
1248 return ret;
1249 }
1250
1251 switch (dev->board) {
1252 case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL:
1253 dprintk("pinnacle 300i dvb setup\n");
1254 fe0->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i,
1255 &dev->i2c_adap);
1256 if (fe0->dvb.frontend) {
1257 fe0->dvb.frontend->ops.tuner_ops.set_params = mt352_pinnacle_tuner_set_params;
1258 }
1259 break;
1260 case SAA7134_BOARD_AVERMEDIA_777:
1261 case SAA7134_BOARD_AVERMEDIA_A16AR:
1262 dprintk("avertv 777 dvb setup\n");
1263 fe0->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777,
1264 &dev->i2c_adap);
1265 if (fe0->dvb.frontend) {
1266 dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
1267 &dev->i2c_adap, 0x61,
1268 TUNER_PHILIPS_TD1316);
1269 }
1270 break;
1271 case SAA7134_BOARD_AVERMEDIA_A16D:
1272 dprintk("AverMedia A16D dvb setup\n");
1273 fe0->dvb.frontend = dvb_attach(mt352_attach,
1274 &avermedia_xc3028_mt352_dev,
1275 &dev->i2c_adap);
1276 attach_xc3028 = 1;
1277 break;
1278 case SAA7134_BOARD_MD7134:
1279 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1280 &medion_cardbus,
1281 &dev->i2c_adap);
1282 if (fe0->dvb.frontend) {
1283 dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
1284 &dev->i2c_adap, medion_cardbus.tuner_address,
1285 TUNER_PHILIPS_FMD1216ME_MK3);
1286 }
1287 break;
1288 case SAA7134_BOARD_PHILIPS_TOUGH:
1289 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1290 &philips_tu1216_60_config,
1291 &dev->i2c_adap);
1292 if (fe0->dvb.frontend) {
1293 fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init;
1294 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
1295 }
1296 break;
1297 case SAA7134_BOARD_FLYDVBTDUO:
1298 case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS:
1299 if (configure_tda827x_fe(dev, &tda827x_lifeview_config,
1300 &tda827x_cfg_0) < 0)
1301 goto detach_frontend;
1302 break;
1303 case SAA7134_BOARD_PHILIPS_EUROPA:
1304 case SAA7134_BOARD_VIDEOMATE_DVBT_300:
1305 case SAA7134_BOARD_ASUS_EUROPA_HYBRID:
1306 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1307 &philips_europa_config,
1308 &dev->i2c_adap);
1309 if (fe0->dvb.frontend) {
1310 dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep;
1311 fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
1312 fe0->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init;
1313 fe0->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep;
1314 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
1315 }
1316 break;
1317 case SAA7134_BOARD_TECHNOTREND_BUDGET_T3000:
1318 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1319 &technotrend_budget_t3000_config,
1320 &dev->i2c_adap);
1321 if (fe0->dvb.frontend) {
1322 dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep;
1323 fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
1324 fe0->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init;
1325 fe0->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep;
1326 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
1327 }
1328 break;
1329 case SAA7134_BOARD_VIDEOMATE_DVBT_200:
1330 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1331 &philips_tu1216_61_config,
1332 &dev->i2c_adap);
1333 if (fe0->dvb.frontend) {
1334 fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init;
1335 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set;
1336 }
1337 break;
1338 case SAA7134_BOARD_KWORLD_DVBT_210:
1339 if (configure_tda827x_fe(dev, &kworld_dvb_t_210_config,
1340 &tda827x_cfg_2) < 0)
1341 goto detach_frontend;
1342 break;
1343 case SAA7134_BOARD_HAUPPAUGE_HVR1120:
1344 fe0->dvb.frontend = dvb_attach(tda10048_attach,
1345 &hcw_tda10048_config,
1346 &dev->i2c_adap);
1347 if (fe0->dvb.frontend != NULL) {
1348 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1349 &dev->i2c_adap, 0x4b,
1350 &tda829x_no_probe);
1351 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1352 0x60, &dev->i2c_adap,
1353 &hcw_tda18271_config);
1354 }
1355 break;
1356 case SAA7134_BOARD_PHILIPS_TIGER:
1357 if (configure_tda827x_fe(dev, &philips_tiger_config,
1358 &tda827x_cfg_0) < 0)
1359 goto detach_frontend;
1360 break;
1361 case SAA7134_BOARD_PINNACLE_PCTV_310i:
1362 if (configure_tda827x_fe(dev, &pinnacle_pctv_310i_config,
1363 &tda827x_cfg_1) < 0)
1364 goto detach_frontend;
1365 break;
1366 case SAA7134_BOARD_HAUPPAUGE_HVR1110:
1367 if (configure_tda827x_fe(dev, &hauppauge_hvr_1110_config,
1368 &tda827x_cfg_1) < 0)
1369 goto detach_frontend;
1370 break;
1371 case SAA7134_BOARD_HAUPPAUGE_HVR1150:
1372 fe0->dvb.frontend = dvb_attach(lgdt3305_attach,
1373 &hcw_lgdt3305_config,
1374 &dev->i2c_adap);
1375 if (fe0->dvb.frontend) {
1376 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1377 &dev->i2c_adap, 0x4b,
1378 &tda829x_no_probe);
1379 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1380 0x60, &dev->i2c_adap,
1381 &hcw_tda18271_config);
1382 }
1383 break;
1384 case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
1385 if (configure_tda827x_fe(dev, &asus_p7131_dual_config,
1386 &tda827x_cfg_0) < 0)
1387 goto detach_frontend;
1388 break;
1389 case SAA7134_BOARD_FLYDVBT_LR301:
1390 if (configure_tda827x_fe(dev, &tda827x_lifeview_config,
1391 &tda827x_cfg_0) < 0)
1392 goto detach_frontend;
1393 break;
1394 case SAA7134_BOARD_FLYDVB_TRIO:
1395 if (!use_frontend) { /* terrestrial */
1396 if (configure_tda827x_fe(dev, &lifeview_trio_config,
1397 &tda827x_cfg_0) < 0)
1398 goto detach_frontend;
1399 } else { /* satellite */
1400 fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap);
1401 if (fe0->dvb.frontend) {
1402 if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x63,
1403 &dev->i2c_adap, 0) == NULL) {
1404 wprintk("%s: Lifeview Trio, No tda826x found!\n", __func__);
1405 goto detach_frontend;
1406 }
1407 if (dvb_attach(isl6421_attach, fe0->dvb.frontend,
1408 &dev->i2c_adap,
1409 0x08, 0, 0, false) == NULL) {
1410 wprintk("%s: Lifeview Trio, No ISL6421 found!\n", __func__);
1411 goto detach_frontend;
1412 }
1413 }
1414 }
1415 break;
1416 case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331:
1417 case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS:
1418 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1419 &ads_tech_duo_config,
1420 &dev->i2c_adap);
1421 if (fe0->dvb.frontend) {
1422 if (dvb_attach(tda827x_attach,fe0->dvb.frontend,
1423 ads_tech_duo_config.tuner_address, &dev->i2c_adap,
1424 &ads_duo_cfg) == NULL) {
1425 wprintk("no tda827x tuner found at addr: %02x\n",
1426 ads_tech_duo_config.tuner_address);
1427 goto detach_frontend;
1428 }
1429 } else
1430 wprintk("failed to attach tda10046\n");
1431 break;
1432 case SAA7134_BOARD_TEVION_DVBT_220RF:
1433 if (configure_tda827x_fe(dev, &tevion_dvbt220rf_config,
1434 &tda827x_cfg_0) < 0)
1435 goto detach_frontend;
1436 break;
1437 case SAA7134_BOARD_MEDION_MD8800_QUADRO:
1438 if (!use_frontend) { /* terrestrial */
1439 if (configure_tda827x_fe(dev, &md8800_dvbt_config,
1440 &tda827x_cfg_0) < 0)
1441 goto detach_frontend;
1442 } else { /* satellite */
1443 fe0->dvb.frontend = dvb_attach(tda10086_attach,
1444 &flydvbs, &dev->i2c_adap);
1445 if (fe0->dvb.frontend) {
1446 struct dvb_frontend *fe = fe0->dvb.frontend;
1447 u8 dev_id = dev->eedata[2];
1448 u8 data = 0xc4;
1449 struct i2c_msg msg = {.addr = 0x08, .flags = 0, .len = 1};
1450
1451 if (dvb_attach(tda826x_attach, fe0->dvb.frontend,
1452 0x60, &dev->i2c_adap, 0) == NULL) {
1453 wprintk("%s: Medion Quadro, no tda826x "
1454 "found !\n", __func__);
1455 goto detach_frontend;
1456 }
1457 if (dev_id != 0x08) {
1458 /* we need to open the i2c gate (we know it exists) */
1459 fe->ops.i2c_gate_ctrl(fe, 1);
1460 if (dvb_attach(isl6405_attach, fe,
1461 &dev->i2c_adap, 0x08, 0, 0) == NULL) {
1462 wprintk("%s: Medion Quadro, no ISL6405 "
1463 "found !\n", __func__);
1464 goto detach_frontend;
1465 }
1466 if (dev_id == 0x07) {
1467 /* fire up the 2nd section of the LNB supply since
1468 we can't do this from the other section */
1469 msg.buf = &data;
1470 i2c_transfer(&dev->i2c_adap, &msg, 1);
1471 }
1472 fe->ops.i2c_gate_ctrl(fe, 0);
1473 dev->original_set_voltage = fe->ops.set_voltage;
1474 fe->ops.set_voltage = md8800_set_voltage;
1475 dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage;
1476 fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage;
1477 } else {
1478 fe->ops.set_voltage = md8800_set_voltage2;
1479 fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage2;
1480 }
1481 }
1482 }
1483 break;
1484 case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180:
1485 fe0->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180,
1486 &dev->i2c_adap);
1487 if (fe0->dvb.frontend)
1488 dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x61,
1489 NULL, DVB_PLL_TDHU2);
1490 break;
1491 case SAA7134_BOARD_ADS_INSTANT_HDTV_PCI:
1492 case SAA7134_BOARD_KWORLD_ATSC110:
1493 fe0->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110,
1494 &dev->i2c_adap);
1495 if (fe0->dvb.frontend)
1496 dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
1497 &dev->i2c_adap, 0x61,
1498 TUNER_PHILIPS_TUV1236D);
1499 break;
1500 case SAA7134_BOARD_KWORLD_PC150U:
1501 saa7134_set_gpio(dev, 18, 1); /* Switch to digital mode */
1502 saa7134_tuner_callback(dev, 0,
1503 TDA18271_CALLBACK_CMD_AGC_ENABLE, 1);
1504 fe0->dvb.frontend = dvb_attach(s5h1411_attach,
1505 &kworld_s5h1411_config,
1506 &dev->i2c_adap);
1507 if (fe0->dvb.frontend != NULL) {
1508 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1509 &dev->i2c_adap, 0x4b,
1510 &tda829x_no_probe);
1511 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1512 0x60, &dev->i2c_adap,
1513 &kworld_pc150u_tda18271_config);
1514 }
1515 break;
1516 case SAA7134_BOARD_FLYDVBS_LR300:
1517 fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
1518 &dev->i2c_adap);
1519 if (fe0->dvb.frontend) {
1520 if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60,
1521 &dev->i2c_adap, 0) == NULL) {
1522 wprintk("%s: No tda826x found!\n", __func__);
1523 goto detach_frontend;
1524 }
1525 if (dvb_attach(isl6421_attach, fe0->dvb.frontend,
1526 &dev->i2c_adap,
1527 0x08, 0, 0, false) == NULL) {
1528 wprintk("%s: No ISL6421 found!\n", __func__);
1529 goto detach_frontend;
1530 }
1531 }
1532 break;
1533 case SAA7134_BOARD_ASUS_EUROPA2_HYBRID:
1534 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1535 &medion_cardbus,
1536 &dev->i2c_adap);
1537 if (fe0->dvb.frontend) {
1538 dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep;
1539 fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep;
1540
1541 dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
1542 &dev->i2c_adap, medion_cardbus.tuner_address,
1543 TUNER_PHILIPS_FMD1216ME_MK3);
1544 }
1545 break;
1546 case SAA7134_BOARD_VIDEOMATE_DVBT_200A:
1547 fe0->dvb.frontend = dvb_attach(tda10046_attach,
1548 &philips_europa_config,
1549 &dev->i2c_adap);
1550 if (fe0->dvb.frontend) {
1551 fe0->dvb.frontend->ops.tuner_ops.init = philips_td1316_tuner_init;
1552 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params;
1553 }
1554 break;
1555 case SAA7134_BOARD_CINERGY_HT_PCMCIA:
1556 if (configure_tda827x_fe(dev, &cinergy_ht_config,
1557 &tda827x_cfg_0) < 0)
1558 goto detach_frontend;
1559 break;
1560 case SAA7134_BOARD_CINERGY_HT_PCI:
1561 if (configure_tda827x_fe(dev, &cinergy_ht_pci_config,
1562 &tda827x_cfg_0) < 0)
1563 goto detach_frontend;
1564 break;
1565 case SAA7134_BOARD_PHILIPS_TIGER_S:
1566 if (configure_tda827x_fe(dev, &philips_tiger_s_config,
1567 &tda827x_cfg_2) < 0)
1568 goto detach_frontend;
1569 break;
1570 case SAA7134_BOARD_ASUS_P7131_4871:
1571 if (configure_tda827x_fe(dev, &asus_p7131_4871_config,
1572 &tda827x_cfg_2) < 0)
1573 goto detach_frontend;
1574 break;
1575 case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA:
1576 if (configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config,
1577 &tda827x_cfg_2) < 0)
1578 goto detach_frontend;
1579 break;
1580 case SAA7134_BOARD_AVERMEDIA_SUPER_007:
1581 if (configure_tda827x_fe(dev, &avermedia_super_007_config,
1582 &tda827x_cfg_0) < 0)
1583 goto detach_frontend;
1584 break;
1585 case SAA7134_BOARD_TWINHAN_DTV_DVB_3056:
1586 if (configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config,
1587 &tda827x_cfg_2_sw42) < 0)
1588 goto detach_frontend;
1589 break;
1590 case SAA7134_BOARD_PHILIPS_SNAKE:
1591 fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
1592 &dev->i2c_adap);
1593 if (fe0->dvb.frontend) {
1594 if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60,
1595 &dev->i2c_adap, 0) == NULL) {
1596 wprintk("%s: No tda826x found!\n", __func__);
1597 goto detach_frontend;
1598 }
1599 if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
1600 &dev->i2c_adap, 0, 0) == NULL) {
1601 wprintk("%s: No lnbp21 found!\n", __func__);
1602 goto detach_frontend;
1603 }
1604 }
1605 break;
1606 case SAA7134_BOARD_CREATIX_CTX953:
1607 if (configure_tda827x_fe(dev, &md8800_dvbt_config,
1608 &tda827x_cfg_0) < 0)
1609 goto detach_frontend;
1610 break;
1611 case SAA7134_BOARD_MSI_TVANYWHERE_AD11:
1612 if (configure_tda827x_fe(dev, &philips_tiger_s_config,
1613 &tda827x_cfg_2) < 0)
1614 goto detach_frontend;
1615 break;
1616 case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
1617 dprintk("AverMedia E506R dvb setup\n");
1618 saa7134_set_gpio(dev, 25, 0);
1619 msleep(10);
1620 saa7134_set_gpio(dev, 25, 1);
1621 fe0->dvb.frontend = dvb_attach(mt352_attach,
1622 &avermedia_xc3028_mt352_dev,
1623 &dev->i2c_adap);
1624 attach_xc3028 = 1;
1625 break;
1626 case SAA7134_BOARD_MD7134_BRIDGE_2:
1627 fe0->dvb.frontend = dvb_attach(tda10086_attach,
1628 &sd1878_4m, &dev->i2c_adap);
1629 if (fe0->dvb.frontend) {
1630 struct dvb_frontend *fe;
1631 if (dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60,
1632 &dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) {
1633 wprintk("%s: MD7134 DVB-S, no SD1878 "
1634 "found !\n", __func__);
1635 goto detach_frontend;
1636 }
1637 /* we need to open the i2c gate (we know it exists) */
1638 fe = fe0->dvb.frontend;
1639 fe->ops.i2c_gate_ctrl(fe, 1);
1640 if (dvb_attach(isl6405_attach, fe,
1641 &dev->i2c_adap, 0x08, 0, 0) == NULL) {
1642 wprintk("%s: MD7134 DVB-S, no ISL6405 "
1643 "found !\n", __func__);
1644 goto detach_frontend;
1645 }
1646 fe->ops.i2c_gate_ctrl(fe, 0);
1647 dev->original_set_voltage = fe->ops.set_voltage;
1648 fe->ops.set_voltage = md8800_set_voltage;
1649 dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage;
1650 fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage;
1651 }
1652 break;
1653 case SAA7134_BOARD_AVERMEDIA_M103:
1654 saa7134_set_gpio(dev, 25, 0);
1655 msleep(10);
1656 saa7134_set_gpio(dev, 25, 1);
1657 fe0->dvb.frontend = dvb_attach(mt352_attach,
1658 &avermedia_xc3028_mt352_dev,
1659 &dev->i2c_adap);
1660 attach_xc3028 = 1;
1661 break;
1662 case SAA7134_BOARD_ASUSTeK_TIGER_3IN1:
1663 if (!use_frontend) { /* terrestrial */
1664 if (configure_tda827x_fe(dev, &asus_tiger_3in1_config,
1665 &tda827x_cfg_2) < 0)
1666 goto detach_frontend;
1667 } else { /* satellite */
1668 fe0->dvb.frontend = dvb_attach(tda10086_attach,
1669 &flydvbs, &dev->i2c_adap);
1670 if (fe0->dvb.frontend) {
1671 if (dvb_attach(tda826x_attach,
1672 fe0->dvb.frontend, 0x60,
1673 &dev->i2c_adap, 0) == NULL) {
1674 wprintk("%s: Asus Tiger 3in1, no "
1675 "tda826x found!\n", __func__);
1676 goto detach_frontend;
1677 }
1678 if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
1679 &dev->i2c_adap, 0, 0) == NULL) {
1680 wprintk("%s: Asus Tiger 3in1, no lnbp21"
1681 " found!\n", __func__);
1682 goto detach_frontend;
1683 }
1684 }
1685 }
1686 break;
1687 case SAA7134_BOARD_ASUSTeK_PS3_100:
1688 if (!use_frontend) { /* terrestrial */
1689 if (configure_tda827x_fe(dev, &asus_ps3_100_config,
1690 &tda827x_cfg_2) < 0)
1691 goto detach_frontend;
1692 } else { /* satellite */
1693 fe0->dvb.frontend = dvb_attach(tda10086_attach,
1694 &flydvbs, &dev->i2c_adap);
1695 if (fe0->dvb.frontend) {
1696 if (dvb_attach(tda826x_attach,
1697 fe0->dvb.frontend, 0x60,
1698 &dev->i2c_adap, 0) == NULL) {
1699 wprintk("%s: Asus My Cinema PS3-100, no "
1700 "tda826x found!\n", __func__);
1701 goto detach_frontend;
1702 }
1703 if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
1704 &dev->i2c_adap, 0, 0) == NULL) {
1705 wprintk("%s: Asus My Cinema PS3-100, no lnbp21"
1706 " found!\n", __func__);
1707 goto detach_frontend;
1708 }
1709 }
1710 }
1711 break;
1712 case SAA7134_BOARD_ASUSTeK_TIGER:
1713 if (configure_tda827x_fe(dev, &philips_tiger_config,
1714 &tda827x_cfg_0) < 0)
1715 goto detach_frontend;
1716 break;
1717 case SAA7134_BOARD_BEHOLD_H6:
1718 fe0->dvb.frontend = dvb_attach(zl10353_attach,
1719 &behold_h6_config,
1720 &dev->i2c_adap);
1721 if (fe0->dvb.frontend) {
1722 dvb_attach(simple_tuner_attach, fe0->dvb.frontend,
1723 &dev->i2c_adap, 0x61,
1724 TUNER_PHILIPS_FMD1216MEX_MK3);
1725 }
1726 break;
1727 case SAA7134_BOARD_BEHOLD_X7:
1728 fe0->dvb.frontend = dvb_attach(zl10353_attach,
1729 &behold_x7_config,
1730 &dev->i2c_adap);
1731 if (fe0->dvb.frontend) {
1732 dvb_attach(xc5000_attach, fe0->dvb.frontend,
1733 &dev->i2c_adap, &behold_x7_tunerconfig);
1734 }
1735 break;
1736 case SAA7134_BOARD_BEHOLD_H7:
1737 fe0->dvb.frontend = dvb_attach(zl10353_attach,
1738 &behold_x7_config,
1739 &dev->i2c_adap);
1740 if (fe0->dvb.frontend) {
1741 dvb_attach(xc5000_attach, fe0->dvb.frontend,
1742 &dev->i2c_adap, &behold_x7_tunerconfig);
1743 }
1744 break;
1745 case SAA7134_BOARD_AVERMEDIA_A700_PRO:
1746 case SAA7134_BOARD_AVERMEDIA_A700_HYBRID:
1747 /* Zarlink ZL10313 */
1748 fe0->dvb.frontend = dvb_attach(mt312_attach,
1749 &avertv_a700_mt312, &dev->i2c_adap);
1750 if (fe0->dvb.frontend) {
1751 if (dvb_attach(zl10036_attach, fe0->dvb.frontend,
1752 &avertv_a700_tuner, &dev->i2c_adap) == NULL) {
1753 wprintk("%s: No zl10036 found!\n",
1754 __func__);
1755 }
1756 }
1757 break;
1758 case SAA7134_BOARD_VIDEOMATE_S350:
1759 fe0->dvb.frontend = dvb_attach(mt312_attach,
1760 &zl10313_compro_s350_config, &dev->i2c_adap);
1761 if (fe0->dvb.frontend)
1762 if (dvb_attach(zl10039_attach, fe0->dvb.frontend,
1763 0x60, &dev->i2c_adap) == NULL)
1764 wprintk("%s: No zl10039 found!\n",
1765 __func__);
1766
1767 break;
1768 case SAA7134_BOARD_VIDEOMATE_T750:
1769 fe0->dvb.frontend = dvb_attach(zl10353_attach,
1770 &videomate_t750_zl10353_config,
1771 &dev->i2c_adap);
1772 if (fe0->dvb.frontend != NULL) {
1773 if (dvb_attach(qt1010_attach,
1774 fe0->dvb.frontend,
1775 &dev->i2c_adap,
1776 &videomate_t750_qt1010_config) == NULL)
1777 wprintk("error attaching QT1010\n");
1778 }
1779 break;
1780 case SAA7134_BOARD_ZOLID_HYBRID_PCI:
1781 fe0->dvb.frontend = dvb_attach(tda10048_attach,
1782 &zolid_tda10048_config,
1783 &dev->i2c_adap);
1784 if (fe0->dvb.frontend != NULL) {
1785 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1786 &dev->i2c_adap, 0x4b,
1787 &tda829x_no_probe);
1788 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1789 0x60, &dev->i2c_adap,
1790 &zolid_tda18271_config);
1791 }
1792 break;
1793 case SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S:
1794 fe0->dvb.frontend = dvb_attach(tda10048_attach,
1795 &dtv1000s_tda10048_config,
1796 &dev->i2c_adap);
1797 if (fe0->dvb.frontend != NULL) {
1798 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1799 &dev->i2c_adap, 0x4b,
1800 &tda829x_no_probe);
1801 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1802 0x60, &dev->i2c_adap,
1803 &dtv1000s_tda18271_config);
1804 }
1805 break;
1806 case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG:
1807 /* Switch to digital mode */
1808 saa7134_tuner_callback(dev, 0,
1809 TDA18271_CALLBACK_CMD_AGC_ENABLE, 1);
1810 fe0->dvb.frontend = dvb_attach(mb86a20s_attach,
1811 &kworld_mb86a20s_config,
1812 &dev->i2c_adap);
1813 if (fe0->dvb.frontend != NULL) {
1814 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1815 &dev->i2c_adap, 0x4b,
1816 &tda829x_no_probe);
1817 fe0->dvb.frontend->ops.i2c_gate_ctrl = kworld_sbtvd_gate_ctrl;
1818 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1819 0x60, &dev->i2c_adap,
1820 &kworld_tda18271_config);
1821 }
1822
1823 /* mb86a20s need to use the I2C gateway */
1824 break;
1825 case SAA7134_BOARD_MAGICPRO_PROHDTV_PRO2:
1826 fe0->dvb.frontend = dvb_attach(lgs8gxx_attach,
1827 &prohdtv_pro2_lgs8g75_config,
1828 &dev->i2c_adap);
1829 if (fe0->dvb.frontend != NULL) {
1830 dvb_attach(tda829x_attach, fe0->dvb.frontend,
1831 &dev->i2c_adap, 0x4b,
1832 &tda829x_no_probe);
1833 dvb_attach(tda18271_attach, fe0->dvb.frontend,
1834 0x60, &dev->i2c_adap,
1835 &prohdtv_pro2_tda18271_config);
1836 }
1837 break;
1838 case SAA7134_BOARD_AVERMEDIA_A706:
1839 /* Enable all DVB-S devices now */
1840 /* CE5039 DVB-S tuner SLEEP pin low */
1841 saa7134_set_gpio(dev, 23, 0);
1842 /* CE6313 DVB-S demod SLEEP pin low */
1843 saa7134_set_gpio(dev, 9, 0);
1844 /* CE6313 DVB-S demod RESET# pin high */
1845 saa7134_set_gpio(dev, 25, 1);
1846 msleep(1);
1847 fe0->dvb.frontend = dvb_attach(mt312_attach,
1848 &zl10313_avermedia_a706_config, &dev->i2c_adap);
1849 if (fe0->dvb.frontend) {
1850 fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL;
1851 if (dvb_attach(zl10039_attach, fe0->dvb.frontend,
1852 0x60, &dev->i2c_adap) == NULL)
1853 wprintk("%s: No zl10039 found!\n",
1854 __func__);
1855 }
1856 break;
1857 default:
1858 wprintk("Huh? unknown DVB card?\n");
1859 break;
1860 }
1861
1862 if (attach_xc3028) {
1863 struct dvb_frontend *fe;
1864 struct xc2028_config cfg = {
1865 .i2c_adap = &dev->i2c_adap,
1866 .i2c_addr = 0x61,
1867 };
1868
1869 if (!fe0->dvb.frontend)
1870 goto detach_frontend;
1871
1872 fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg);
1873 if (!fe) {
1874 printk(KERN_ERR "%s/2: xc3028 attach failed\n",
1875 dev->name);
1876 goto detach_frontend;
1877 }
1878 }
1879
1880 if (NULL == fe0->dvb.frontend) {
1881 printk(KERN_ERR "%s/dvb: frontend initialization failed\n", dev->name);
1882 goto detach_frontend;
1883 }
1884 /* define general-purpose callback pointer */
1885 fe0->dvb.frontend->callback = saa7134_tuner_callback;
1886
1887 /* register everything else */
1888 ret = vb2_dvb_register_bus(&dev->frontends, THIS_MODULE, dev,
1889 &dev->pci->dev, adapter_nr, 0);
1890
1891 /* this sequence is necessary to make the tda1004x load its firmware
1892 * and to enter analog mode of hybrid boards
1893 */
1894 if (!ret) {
1895 if (fe0->dvb.frontend->ops.init)
1896 fe0->dvb.frontend->ops.init(fe0->dvb.frontend);
1897 if (fe0->dvb.frontend->ops.sleep)
1898 fe0->dvb.frontend->ops.sleep(fe0->dvb.frontend);
1899 if (fe0->dvb.frontend->ops.tuner_ops.sleep)
1900 fe0->dvb.frontend->ops.tuner_ops.sleep(fe0->dvb.frontend);
1901 }
1902 return ret;
1903
1904 detach_frontend:
1905 vb2_dvb_dealloc_frontends(&dev->frontends);
1906 vb2_queue_release(&fe0->dvb.dvbq);
1907 return -EINVAL;
1908 }
1909
dvb_fini(struct saa7134_dev * dev)1910 static int dvb_fini(struct saa7134_dev *dev)
1911 {
1912 struct vb2_dvb_frontend *fe0;
1913
1914 /* Get the first frontend */
1915 fe0 = vb2_dvb_get_frontend(&dev->frontends, 1);
1916 if (!fe0)
1917 return -EINVAL;
1918
1919 /* FIXME: I suspect that this code is bogus, since the entry for
1920 Pinnacle 300I DVB-T PAL already defines the proper init to allow
1921 the detection of mt2032 (TDA9887_PORT2_INACTIVE)
1922 */
1923 if (dev->board == SAA7134_BOARD_PINNACLE_300I_DVBT_PAL) {
1924 struct v4l2_priv_tun_config tda9887_cfg;
1925 static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE;
1926
1927 tda9887_cfg.tuner = TUNER_TDA9887;
1928 tda9887_cfg.priv = &on;
1929
1930 /* otherwise we don't detect the tuner on next insmod */
1931 saa_call_all(dev, tuner, s_config, &tda9887_cfg);
1932 } else if (dev->board == SAA7134_BOARD_MEDION_MD8800_QUADRO) {
1933 if ((dev->eedata[2] == 0x07) && use_frontend) {
1934 /* turn off the 2nd lnb supply */
1935 u8 data = 0x80;
1936 struct i2c_msg msg = {.addr = 0x08, .buf = &data, .flags = 0, .len = 1};
1937 struct dvb_frontend *fe;
1938 fe = fe0->dvb.frontend;
1939 if (fe->ops.i2c_gate_ctrl) {
1940 fe->ops.i2c_gate_ctrl(fe, 1);
1941 i2c_transfer(&dev->i2c_adap, &msg, 1);
1942 fe->ops.i2c_gate_ctrl(fe, 0);
1943 }
1944 }
1945 }
1946 vb2_dvb_unregister_bus(&dev->frontends);
1947 vb2_queue_release(&fe0->dvb.dvbq);
1948 return 0;
1949 }
1950
1951 static struct saa7134_mpeg_ops dvb_ops = {
1952 .type = SAA7134_MPEG_DVB,
1953 .init = dvb_init,
1954 .fini = dvb_fini,
1955 };
1956
dvb_register(void)1957 static int __init dvb_register(void)
1958 {
1959 return saa7134_ts_register(&dvb_ops);
1960 }
1961
dvb_unregister(void)1962 static void __exit dvb_unregister(void)
1963 {
1964 saa7134_ts_unregister(&dvb_ops);
1965 }
1966
1967 module_init(dvb_register);
1968 module_exit(dvb_unregister);
1969