1 /*
2 * drivers/mtd/nand/fsmc_nand.c
3 *
4 * ST Microelectronics
5 * Flexible Static Memory Controller (FSMC)
6 * Driver for NAND portions
7 *
8 * Copyright © 2010 ST Microelectronics
9 * Vipin Kumar <vipin.kumar@st.com>
10 * Ashish Priyadarshi
11 *
12 * Based on drivers/mtd/nand/nomadik_nand.c
13 *
14 * This file is licensed under the terms of the GNU General Public
15 * License version 2. This program is licensed "as is" without any
16 * warranty of any kind, whether express or implied.
17 */
18
19 #include <linux/clk.h>
20 #include <linux/completion.h>
21 #include <linux/dmaengine.h>
22 #include <linux/dma-direction.h>
23 #include <linux/dma-mapping.h>
24 #include <linux/err.h>
25 #include <linux/init.h>
26 #include <linux/module.h>
27 #include <linux/resource.h>
28 #include <linux/sched.h>
29 #include <linux/types.h>
30 #include <linux/mtd/mtd.h>
31 #include <linux/mtd/nand.h>
32 #include <linux/mtd/nand_ecc.h>
33 #include <linux/platform_device.h>
34 #include <linux/of.h>
35 #include <linux/mtd/partitions.h>
36 #include <linux/io.h>
37 #include <linux/slab.h>
38 #include <linux/mtd/fsmc.h>
39 #include <linux/amba/bus.h>
40 #include <mtd/mtd-abi.h>
41
42 static struct nand_ecclayout fsmc_ecc1_128_layout = {
43 .eccbytes = 24,
44 .eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52,
45 66, 67, 68, 82, 83, 84, 98, 99, 100, 114, 115, 116},
46 .oobfree = {
47 {.offset = 8, .length = 8},
48 {.offset = 24, .length = 8},
49 {.offset = 40, .length = 8},
50 {.offset = 56, .length = 8},
51 {.offset = 72, .length = 8},
52 {.offset = 88, .length = 8},
53 {.offset = 104, .length = 8},
54 {.offset = 120, .length = 8}
55 }
56 };
57
58 static struct nand_ecclayout fsmc_ecc1_64_layout = {
59 .eccbytes = 12,
60 .eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52},
61 .oobfree = {
62 {.offset = 8, .length = 8},
63 {.offset = 24, .length = 8},
64 {.offset = 40, .length = 8},
65 {.offset = 56, .length = 8},
66 }
67 };
68
69 static struct nand_ecclayout fsmc_ecc1_16_layout = {
70 .eccbytes = 3,
71 .eccpos = {2, 3, 4},
72 .oobfree = {
73 {.offset = 8, .length = 8},
74 }
75 };
76
77 /*
78 * ECC4 layout for NAND of pagesize 8192 bytes & OOBsize 256 bytes. 13*16 bytes
79 * of OB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block and 46
80 * bytes are free for use.
81 */
82 static struct nand_ecclayout fsmc_ecc4_256_layout = {
83 .eccbytes = 208,
84 .eccpos = { 2, 3, 4, 5, 6, 7, 8,
85 9, 10, 11, 12, 13, 14,
86 18, 19, 20, 21, 22, 23, 24,
87 25, 26, 27, 28, 29, 30,
88 34, 35, 36, 37, 38, 39, 40,
89 41, 42, 43, 44, 45, 46,
90 50, 51, 52, 53, 54, 55, 56,
91 57, 58, 59, 60, 61, 62,
92 66, 67, 68, 69, 70, 71, 72,
93 73, 74, 75, 76, 77, 78,
94 82, 83, 84, 85, 86, 87, 88,
95 89, 90, 91, 92, 93, 94,
96 98, 99, 100, 101, 102, 103, 104,
97 105, 106, 107, 108, 109, 110,
98 114, 115, 116, 117, 118, 119, 120,
99 121, 122, 123, 124, 125, 126,
100 130, 131, 132, 133, 134, 135, 136,
101 137, 138, 139, 140, 141, 142,
102 146, 147, 148, 149, 150, 151, 152,
103 153, 154, 155, 156, 157, 158,
104 162, 163, 164, 165, 166, 167, 168,
105 169, 170, 171, 172, 173, 174,
106 178, 179, 180, 181, 182, 183, 184,
107 185, 186, 187, 188, 189, 190,
108 194, 195, 196, 197, 198, 199, 200,
109 201, 202, 203, 204, 205, 206,
110 210, 211, 212, 213, 214, 215, 216,
111 217, 218, 219, 220, 221, 222,
112 226, 227, 228, 229, 230, 231, 232,
113 233, 234, 235, 236, 237, 238,
114 242, 243, 244, 245, 246, 247, 248,
115 249, 250, 251, 252, 253, 254
116 },
117 .oobfree = {
118 {.offset = 15, .length = 3},
119 {.offset = 31, .length = 3},
120 {.offset = 47, .length = 3},
121 {.offset = 63, .length = 3},
122 {.offset = 79, .length = 3},
123 {.offset = 95, .length = 3},
124 {.offset = 111, .length = 3},
125 {.offset = 127, .length = 3},
126 {.offset = 143, .length = 3},
127 {.offset = 159, .length = 3},
128 {.offset = 175, .length = 3},
129 {.offset = 191, .length = 3},
130 {.offset = 207, .length = 3},
131 {.offset = 223, .length = 3},
132 {.offset = 239, .length = 3},
133 {.offset = 255, .length = 1}
134 }
135 };
136
137 /*
138 * ECC4 layout for NAND of pagesize 4096 bytes & OOBsize 224 bytes. 13*8 bytes
139 * of OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block & 118
140 * bytes are free for use.
141 */
142 static struct nand_ecclayout fsmc_ecc4_224_layout = {
143 .eccbytes = 104,
144 .eccpos = { 2, 3, 4, 5, 6, 7, 8,
145 9, 10, 11, 12, 13, 14,
146 18, 19, 20, 21, 22, 23, 24,
147 25, 26, 27, 28, 29, 30,
148 34, 35, 36, 37, 38, 39, 40,
149 41, 42, 43, 44, 45, 46,
150 50, 51, 52, 53, 54, 55, 56,
151 57, 58, 59, 60, 61, 62,
152 66, 67, 68, 69, 70, 71, 72,
153 73, 74, 75, 76, 77, 78,
154 82, 83, 84, 85, 86, 87, 88,
155 89, 90, 91, 92, 93, 94,
156 98, 99, 100, 101, 102, 103, 104,
157 105, 106, 107, 108, 109, 110,
158 114, 115, 116, 117, 118, 119, 120,
159 121, 122, 123, 124, 125, 126
160 },
161 .oobfree = {
162 {.offset = 15, .length = 3},
163 {.offset = 31, .length = 3},
164 {.offset = 47, .length = 3},
165 {.offset = 63, .length = 3},
166 {.offset = 79, .length = 3},
167 {.offset = 95, .length = 3},
168 {.offset = 111, .length = 3},
169 {.offset = 127, .length = 97}
170 }
171 };
172
173 /*
174 * ECC4 layout for NAND of pagesize 4096 bytes & OOBsize 128 bytes. 13*8 bytes
175 * of OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block & 22
176 * bytes are free for use.
177 */
178 static struct nand_ecclayout fsmc_ecc4_128_layout = {
179 .eccbytes = 104,
180 .eccpos = { 2, 3, 4, 5, 6, 7, 8,
181 9, 10, 11, 12, 13, 14,
182 18, 19, 20, 21, 22, 23, 24,
183 25, 26, 27, 28, 29, 30,
184 34, 35, 36, 37, 38, 39, 40,
185 41, 42, 43, 44, 45, 46,
186 50, 51, 52, 53, 54, 55, 56,
187 57, 58, 59, 60, 61, 62,
188 66, 67, 68, 69, 70, 71, 72,
189 73, 74, 75, 76, 77, 78,
190 82, 83, 84, 85, 86, 87, 88,
191 89, 90, 91, 92, 93, 94,
192 98, 99, 100, 101, 102, 103, 104,
193 105, 106, 107, 108, 109, 110,
194 114, 115, 116, 117, 118, 119, 120,
195 121, 122, 123, 124, 125, 126
196 },
197 .oobfree = {
198 {.offset = 15, .length = 3},
199 {.offset = 31, .length = 3},
200 {.offset = 47, .length = 3},
201 {.offset = 63, .length = 3},
202 {.offset = 79, .length = 3},
203 {.offset = 95, .length = 3},
204 {.offset = 111, .length = 3},
205 {.offset = 127, .length = 1}
206 }
207 };
208
209 /*
210 * ECC4 layout for NAND of pagesize 2048 bytes & OOBsize 64 bytes. 13*4 bytes of
211 * OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block and 10
212 * bytes are free for use.
213 */
214 static struct nand_ecclayout fsmc_ecc4_64_layout = {
215 .eccbytes = 52,
216 .eccpos = { 2, 3, 4, 5, 6, 7, 8,
217 9, 10, 11, 12, 13, 14,
218 18, 19, 20, 21, 22, 23, 24,
219 25, 26, 27, 28, 29, 30,
220 34, 35, 36, 37, 38, 39, 40,
221 41, 42, 43, 44, 45, 46,
222 50, 51, 52, 53, 54, 55, 56,
223 57, 58, 59, 60, 61, 62,
224 },
225 .oobfree = {
226 {.offset = 15, .length = 3},
227 {.offset = 31, .length = 3},
228 {.offset = 47, .length = 3},
229 {.offset = 63, .length = 1},
230 }
231 };
232
233 /*
234 * ECC4 layout for NAND of pagesize 512 bytes & OOBsize 16 bytes. 13 bytes of
235 * OOB size is reserved for ECC, Byte no. 4 & 5 reserved for bad block and One
236 * byte is free for use.
237 */
238 static struct nand_ecclayout fsmc_ecc4_16_layout = {
239 .eccbytes = 13,
240 .eccpos = { 0, 1, 2, 3, 6, 7, 8,
241 9, 10, 11, 12, 13, 14
242 },
243 .oobfree = {
244 {.offset = 15, .length = 1},
245 }
246 };
247
248 /*
249 * ECC placement definitions in oobfree type format.
250 * There are 13 bytes of ecc for every 512 byte block and it has to be read
251 * consecutively and immediately after the 512 byte data block for hardware to
252 * generate the error bit offsets in 512 byte data.
253 * Managing the ecc bytes in the following way makes it easier for software to
254 * read ecc bytes consecutive to data bytes. This way is similar to
255 * oobfree structure maintained already in generic nand driver
256 */
257 static struct fsmc_eccplace fsmc_ecc4_lp_place = {
258 .eccplace = {
259 {.offset = 2, .length = 13},
260 {.offset = 18, .length = 13},
261 {.offset = 34, .length = 13},
262 {.offset = 50, .length = 13},
263 {.offset = 66, .length = 13},
264 {.offset = 82, .length = 13},
265 {.offset = 98, .length = 13},
266 {.offset = 114, .length = 13}
267 }
268 };
269
270 static struct fsmc_eccplace fsmc_ecc4_sp_place = {
271 .eccplace = {
272 {.offset = 0, .length = 4},
273 {.offset = 6, .length = 9}
274 }
275 };
276
277 /**
278 * struct fsmc_nand_data - structure for FSMC NAND device state
279 *
280 * @pid: Part ID on the AMBA PrimeCell format
281 * @mtd: MTD info for a NAND flash.
282 * @nand: Chip related info for a NAND flash.
283 * @partitions: Partition info for a NAND Flash.
284 * @nr_partitions: Total number of partition of a NAND flash.
285 *
286 * @ecc_place: ECC placing locations in oobfree type format.
287 * @bank: Bank number for probed device.
288 * @clk: Clock structure for FSMC.
289 *
290 * @read_dma_chan: DMA channel for read access
291 * @write_dma_chan: DMA channel for write access to NAND
292 * @dma_access_complete: Completion structure
293 *
294 * @data_pa: NAND Physical port for Data.
295 * @data_va: NAND port for Data.
296 * @cmd_va: NAND port for Command.
297 * @addr_va: NAND port for Address.
298 * @regs_va: FSMC regs base address.
299 */
300 struct fsmc_nand_data {
301 u32 pid;
302 struct mtd_info mtd;
303 struct nand_chip nand;
304 struct mtd_partition *partitions;
305 unsigned int nr_partitions;
306
307 struct fsmc_eccplace *ecc_place;
308 unsigned int bank;
309 struct device *dev;
310 enum access_mode mode;
311 struct clk *clk;
312
313 /* DMA related objects */
314 struct dma_chan *read_dma_chan;
315 struct dma_chan *write_dma_chan;
316 struct completion dma_access_complete;
317
318 struct fsmc_nand_timings *dev_timings;
319
320 dma_addr_t data_pa;
321 void __iomem *data_va;
322 void __iomem *cmd_va;
323 void __iomem *addr_va;
324 void __iomem *regs_va;
325
326 void (*select_chip)(uint32_t bank, uint32_t busw);
327 };
328
329 /* Assert CS signal based on chipnr */
fsmc_select_chip(struct mtd_info * mtd,int chipnr)330 static void fsmc_select_chip(struct mtd_info *mtd, int chipnr)
331 {
332 struct nand_chip *chip = mtd->priv;
333 struct fsmc_nand_data *host;
334
335 host = container_of(mtd, struct fsmc_nand_data, mtd);
336
337 switch (chipnr) {
338 case -1:
339 chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
340 break;
341 case 0:
342 case 1:
343 case 2:
344 case 3:
345 if (host->select_chip)
346 host->select_chip(chipnr,
347 chip->options & NAND_BUSWIDTH_16);
348 break;
349
350 default:
351 BUG();
352 }
353 }
354
355 /*
356 * fsmc_cmd_ctrl - For facilitaing Hardware access
357 * This routine allows hardware specific access to control-lines(ALE,CLE)
358 */
fsmc_cmd_ctrl(struct mtd_info * mtd,int cmd,unsigned int ctrl)359 static void fsmc_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
360 {
361 struct nand_chip *this = mtd->priv;
362 struct fsmc_nand_data *host = container_of(mtd,
363 struct fsmc_nand_data, mtd);
364 void __iomem *regs = host->regs_va;
365 unsigned int bank = host->bank;
366
367 if (ctrl & NAND_CTRL_CHANGE) {
368 u32 pc;
369
370 if (ctrl & NAND_CLE) {
371 this->IO_ADDR_R = host->cmd_va;
372 this->IO_ADDR_W = host->cmd_va;
373 } else if (ctrl & NAND_ALE) {
374 this->IO_ADDR_R = host->addr_va;
375 this->IO_ADDR_W = host->addr_va;
376 } else {
377 this->IO_ADDR_R = host->data_va;
378 this->IO_ADDR_W = host->data_va;
379 }
380
381 pc = readl(FSMC_NAND_REG(regs, bank, PC));
382 if (ctrl & NAND_NCE)
383 pc |= FSMC_ENABLE;
384 else
385 pc &= ~FSMC_ENABLE;
386 writel_relaxed(pc, FSMC_NAND_REG(regs, bank, PC));
387 }
388
389 mb();
390
391 if (cmd != NAND_CMD_NONE)
392 writeb_relaxed(cmd, this->IO_ADDR_W);
393 }
394
395 /*
396 * fsmc_nand_setup - FSMC (Flexible Static Memory Controller) init routine
397 *
398 * This routine initializes timing parameters related to NAND memory access in
399 * FSMC registers
400 */
fsmc_nand_setup(void __iomem * regs,uint32_t bank,uint32_t busw,struct fsmc_nand_timings * timings)401 static void fsmc_nand_setup(void __iomem *regs, uint32_t bank,
402 uint32_t busw, struct fsmc_nand_timings *timings)
403 {
404 uint32_t value = FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON;
405 uint32_t tclr, tar, thiz, thold, twait, tset;
406 struct fsmc_nand_timings *tims;
407 struct fsmc_nand_timings default_timings = {
408 .tclr = FSMC_TCLR_1,
409 .tar = FSMC_TAR_1,
410 .thiz = FSMC_THIZ_1,
411 .thold = FSMC_THOLD_4,
412 .twait = FSMC_TWAIT_6,
413 .tset = FSMC_TSET_0,
414 };
415
416 if (timings)
417 tims = timings;
418 else
419 tims = &default_timings;
420
421 tclr = (tims->tclr & FSMC_TCLR_MASK) << FSMC_TCLR_SHIFT;
422 tar = (tims->tar & FSMC_TAR_MASK) << FSMC_TAR_SHIFT;
423 thiz = (tims->thiz & FSMC_THIZ_MASK) << FSMC_THIZ_SHIFT;
424 thold = (tims->thold & FSMC_THOLD_MASK) << FSMC_THOLD_SHIFT;
425 twait = (tims->twait & FSMC_TWAIT_MASK) << FSMC_TWAIT_SHIFT;
426 tset = (tims->tset & FSMC_TSET_MASK) << FSMC_TSET_SHIFT;
427
428 if (busw)
429 writel_relaxed(value | FSMC_DEVWID_16,
430 FSMC_NAND_REG(regs, bank, PC));
431 else
432 writel_relaxed(value | FSMC_DEVWID_8,
433 FSMC_NAND_REG(regs, bank, PC));
434
435 writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) | tclr | tar,
436 FSMC_NAND_REG(regs, bank, PC));
437 writel_relaxed(thiz | thold | twait | tset,
438 FSMC_NAND_REG(regs, bank, COMM));
439 writel_relaxed(thiz | thold | twait | tset,
440 FSMC_NAND_REG(regs, bank, ATTRIB));
441 }
442
443 /*
444 * fsmc_enable_hwecc - Enables Hardware ECC through FSMC registers
445 */
fsmc_enable_hwecc(struct mtd_info * mtd,int mode)446 static void fsmc_enable_hwecc(struct mtd_info *mtd, int mode)
447 {
448 struct fsmc_nand_data *host = container_of(mtd,
449 struct fsmc_nand_data, mtd);
450 void __iomem *regs = host->regs_va;
451 uint32_t bank = host->bank;
452
453 writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) & ~FSMC_ECCPLEN_256,
454 FSMC_NAND_REG(regs, bank, PC));
455 writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) & ~FSMC_ECCEN,
456 FSMC_NAND_REG(regs, bank, PC));
457 writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) | FSMC_ECCEN,
458 FSMC_NAND_REG(regs, bank, PC));
459 }
460
461 /*
462 * fsmc_read_hwecc_ecc4 - Hardware ECC calculator for ecc4 option supported by
463 * FSMC. ECC is 13 bytes for 512 bytes of data (supports error correction up to
464 * max of 8-bits)
465 */
fsmc_read_hwecc_ecc4(struct mtd_info * mtd,const uint8_t * data,uint8_t * ecc)466 static int fsmc_read_hwecc_ecc4(struct mtd_info *mtd, const uint8_t *data,
467 uint8_t *ecc)
468 {
469 struct fsmc_nand_data *host = container_of(mtd,
470 struct fsmc_nand_data, mtd);
471 void __iomem *regs = host->regs_va;
472 uint32_t bank = host->bank;
473 uint32_t ecc_tmp;
474 unsigned long deadline = jiffies + FSMC_BUSY_WAIT_TIMEOUT;
475
476 do {
477 if (readl_relaxed(FSMC_NAND_REG(regs, bank, STS)) & FSMC_CODE_RDY)
478 break;
479 else
480 cond_resched();
481 } while (!time_after_eq(jiffies, deadline));
482
483 if (time_after_eq(jiffies, deadline)) {
484 dev_err(host->dev, "calculate ecc timed out\n");
485 return -ETIMEDOUT;
486 }
487
488 ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC1));
489 ecc[0] = (uint8_t) (ecc_tmp >> 0);
490 ecc[1] = (uint8_t) (ecc_tmp >> 8);
491 ecc[2] = (uint8_t) (ecc_tmp >> 16);
492 ecc[3] = (uint8_t) (ecc_tmp >> 24);
493
494 ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC2));
495 ecc[4] = (uint8_t) (ecc_tmp >> 0);
496 ecc[5] = (uint8_t) (ecc_tmp >> 8);
497 ecc[6] = (uint8_t) (ecc_tmp >> 16);
498 ecc[7] = (uint8_t) (ecc_tmp >> 24);
499
500 ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC3));
501 ecc[8] = (uint8_t) (ecc_tmp >> 0);
502 ecc[9] = (uint8_t) (ecc_tmp >> 8);
503 ecc[10] = (uint8_t) (ecc_tmp >> 16);
504 ecc[11] = (uint8_t) (ecc_tmp >> 24);
505
506 ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, STS));
507 ecc[12] = (uint8_t) (ecc_tmp >> 16);
508
509 return 0;
510 }
511
512 /*
513 * fsmc_read_hwecc_ecc1 - Hardware ECC calculator for ecc1 option supported by
514 * FSMC. ECC is 3 bytes for 512 bytes of data (supports error correction up to
515 * max of 1-bit)
516 */
fsmc_read_hwecc_ecc1(struct mtd_info * mtd,const uint8_t * data,uint8_t * ecc)517 static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data,
518 uint8_t *ecc)
519 {
520 struct fsmc_nand_data *host = container_of(mtd,
521 struct fsmc_nand_data, mtd);
522 void __iomem *regs = host->regs_va;
523 uint32_t bank = host->bank;
524 uint32_t ecc_tmp;
525
526 ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC1));
527 ecc[0] = (uint8_t) (ecc_tmp >> 0);
528 ecc[1] = (uint8_t) (ecc_tmp >> 8);
529 ecc[2] = (uint8_t) (ecc_tmp >> 16);
530
531 return 0;
532 }
533
534 /* Count the number of 0's in buff upto a max of max_bits */
count_written_bits(uint8_t * buff,int size,int max_bits)535 static int count_written_bits(uint8_t *buff, int size, int max_bits)
536 {
537 int k, written_bits = 0;
538
539 for (k = 0; k < size; k++) {
540 written_bits += hweight8(~buff[k]);
541 if (written_bits > max_bits)
542 break;
543 }
544
545 return written_bits;
546 }
547
dma_complete(void * param)548 static void dma_complete(void *param)
549 {
550 struct fsmc_nand_data *host = param;
551
552 complete(&host->dma_access_complete);
553 }
554
dma_xfer(struct fsmc_nand_data * host,void * buffer,int len,enum dma_data_direction direction)555 static int dma_xfer(struct fsmc_nand_data *host, void *buffer, int len,
556 enum dma_data_direction direction)
557 {
558 struct dma_chan *chan;
559 struct dma_device *dma_dev;
560 struct dma_async_tx_descriptor *tx;
561 dma_addr_t dma_dst, dma_src, dma_addr;
562 dma_cookie_t cookie;
563 unsigned long flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
564 int ret;
565
566 if (direction == DMA_TO_DEVICE)
567 chan = host->write_dma_chan;
568 else if (direction == DMA_FROM_DEVICE)
569 chan = host->read_dma_chan;
570 else
571 return -EINVAL;
572
573 dma_dev = chan->device;
574 dma_addr = dma_map_single(dma_dev->dev, buffer, len, direction);
575
576 if (direction == DMA_TO_DEVICE) {
577 dma_src = dma_addr;
578 dma_dst = host->data_pa;
579 } else {
580 dma_src = host->data_pa;
581 dma_dst = dma_addr;
582 }
583
584 tx = dma_dev->device_prep_dma_memcpy(chan, dma_dst, dma_src,
585 len, flags);
586 if (!tx) {
587 dev_err(host->dev, "device_prep_dma_memcpy error\n");
588 ret = -EIO;
589 goto unmap_dma;
590 }
591
592 tx->callback = dma_complete;
593 tx->callback_param = host;
594 cookie = tx->tx_submit(tx);
595
596 ret = dma_submit_error(cookie);
597 if (ret) {
598 dev_err(host->dev, "dma_submit_error %d\n", cookie);
599 goto unmap_dma;
600 }
601
602 dma_async_issue_pending(chan);
603
604 ret =
605 wait_for_completion_timeout(&host->dma_access_complete,
606 msecs_to_jiffies(3000));
607 if (ret <= 0) {
608 dmaengine_terminate_all(chan);
609 dev_err(host->dev, "wait_for_completion_timeout\n");
610 if (!ret)
611 ret = -ETIMEDOUT;
612 goto unmap_dma;
613 }
614
615 ret = 0;
616
617 unmap_dma:
618 dma_unmap_single(dma_dev->dev, dma_addr, len, direction);
619
620 return ret;
621 }
622
623 /*
624 * fsmc_write_buf - write buffer to chip
625 * @mtd: MTD device structure
626 * @buf: data buffer
627 * @len: number of bytes to write
628 */
fsmc_write_buf(struct mtd_info * mtd,const uint8_t * buf,int len)629 static void fsmc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
630 {
631 int i;
632 struct nand_chip *chip = mtd->priv;
633
634 if (IS_ALIGNED((uint32_t)buf, sizeof(uint32_t)) &&
635 IS_ALIGNED(len, sizeof(uint32_t))) {
636 uint32_t *p = (uint32_t *)buf;
637 len = len >> 2;
638 for (i = 0; i < len; i++)
639 writel_relaxed(p[i], chip->IO_ADDR_W);
640 } else {
641 for (i = 0; i < len; i++)
642 writeb_relaxed(buf[i], chip->IO_ADDR_W);
643 }
644 }
645
646 /*
647 * fsmc_read_buf - read chip data into buffer
648 * @mtd: MTD device structure
649 * @buf: buffer to store date
650 * @len: number of bytes to read
651 */
fsmc_read_buf(struct mtd_info * mtd,uint8_t * buf,int len)652 static void fsmc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
653 {
654 int i;
655 struct nand_chip *chip = mtd->priv;
656
657 if (IS_ALIGNED((uint32_t)buf, sizeof(uint32_t)) &&
658 IS_ALIGNED(len, sizeof(uint32_t))) {
659 uint32_t *p = (uint32_t *)buf;
660 len = len >> 2;
661 for (i = 0; i < len; i++)
662 p[i] = readl_relaxed(chip->IO_ADDR_R);
663 } else {
664 for (i = 0; i < len; i++)
665 buf[i] = readb_relaxed(chip->IO_ADDR_R);
666 }
667 }
668
669 /*
670 * fsmc_read_buf_dma - read chip data into buffer
671 * @mtd: MTD device structure
672 * @buf: buffer to store date
673 * @len: number of bytes to read
674 */
fsmc_read_buf_dma(struct mtd_info * mtd,uint8_t * buf,int len)675 static void fsmc_read_buf_dma(struct mtd_info *mtd, uint8_t *buf, int len)
676 {
677 struct fsmc_nand_data *host;
678
679 host = container_of(mtd, struct fsmc_nand_data, mtd);
680 dma_xfer(host, buf, len, DMA_FROM_DEVICE);
681 }
682
683 /*
684 * fsmc_write_buf_dma - write buffer to chip
685 * @mtd: MTD device structure
686 * @buf: data buffer
687 * @len: number of bytes to write
688 */
fsmc_write_buf_dma(struct mtd_info * mtd,const uint8_t * buf,int len)689 static void fsmc_write_buf_dma(struct mtd_info *mtd, const uint8_t *buf,
690 int len)
691 {
692 struct fsmc_nand_data *host;
693
694 host = container_of(mtd, struct fsmc_nand_data, mtd);
695 dma_xfer(host, (void *)buf, len, DMA_TO_DEVICE);
696 }
697
698 /*
699 * fsmc_read_page_hwecc
700 * @mtd: mtd info structure
701 * @chip: nand chip info structure
702 * @buf: buffer to store read data
703 * @oob_required: caller expects OOB data read to chip->oob_poi
704 * @page: page number to read
705 *
706 * This routine is needed for fsmc version 8 as reading from NAND chip has to be
707 * performed in a strict sequence as follows:
708 * data(512 byte) -> ecc(13 byte)
709 * After this read, fsmc hardware generates and reports error data bits(up to a
710 * max of 8 bits)
711 */
fsmc_read_page_hwecc(struct mtd_info * mtd,struct nand_chip * chip,uint8_t * buf,int oob_required,int page)712 static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
713 uint8_t *buf, int oob_required, int page)
714 {
715 struct fsmc_nand_data *host = container_of(mtd,
716 struct fsmc_nand_data, mtd);
717 struct fsmc_eccplace *ecc_place = host->ecc_place;
718 int i, j, s, stat, eccsize = chip->ecc.size;
719 int eccbytes = chip->ecc.bytes;
720 int eccsteps = chip->ecc.steps;
721 uint8_t *p = buf;
722 uint8_t *ecc_calc = chip->buffers->ecccalc;
723 uint8_t *ecc_code = chip->buffers->ecccode;
724 int off, len, group = 0;
725 /*
726 * ecc_oob is intentionally taken as uint16_t. In 16bit devices, we
727 * end up reading 14 bytes (7 words) from oob. The local array is
728 * to maintain word alignment
729 */
730 uint16_t ecc_oob[7];
731 uint8_t *oob = (uint8_t *)&ecc_oob[0];
732 unsigned int max_bitflips = 0;
733
734 for (i = 0, s = 0; s < eccsteps; s++, i += eccbytes, p += eccsize) {
735 chip->cmdfunc(mtd, NAND_CMD_READ0, s * eccsize, page);
736 chip->ecc.hwctl(mtd, NAND_ECC_READ);
737 chip->read_buf(mtd, p, eccsize);
738
739 for (j = 0; j < eccbytes;) {
740 off = ecc_place->eccplace[group].offset;
741 len = ecc_place->eccplace[group].length;
742 group++;
743
744 /*
745 * length is intentionally kept a higher multiple of 2
746 * to read at least 13 bytes even in case of 16 bit NAND
747 * devices
748 */
749 if (chip->options & NAND_BUSWIDTH_16)
750 len = roundup(len, 2);
751
752 chip->cmdfunc(mtd, NAND_CMD_READOOB, off, page);
753 chip->read_buf(mtd, oob + j, len);
754 j += len;
755 }
756
757 memcpy(&ecc_code[i], oob, chip->ecc.bytes);
758 chip->ecc.calculate(mtd, p, &ecc_calc[i]);
759
760 stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
761 if (stat < 0) {
762 mtd->ecc_stats.failed++;
763 } else {
764 mtd->ecc_stats.corrected += stat;
765 max_bitflips = max_t(unsigned int, max_bitflips, stat);
766 }
767 }
768
769 return max_bitflips;
770 }
771
772 /*
773 * fsmc_bch8_correct_data
774 * @mtd: mtd info structure
775 * @dat: buffer of read data
776 * @read_ecc: ecc read from device spare area
777 * @calc_ecc: ecc calculated from read data
778 *
779 * calc_ecc is a 104 bit information containing maximum of 8 error
780 * offset informations of 13 bits each in 512 bytes of read data.
781 */
fsmc_bch8_correct_data(struct mtd_info * mtd,uint8_t * dat,uint8_t * read_ecc,uint8_t * calc_ecc)782 static int fsmc_bch8_correct_data(struct mtd_info *mtd, uint8_t *dat,
783 uint8_t *read_ecc, uint8_t *calc_ecc)
784 {
785 struct fsmc_nand_data *host = container_of(mtd,
786 struct fsmc_nand_data, mtd);
787 struct nand_chip *chip = mtd->priv;
788 void __iomem *regs = host->regs_va;
789 unsigned int bank = host->bank;
790 uint32_t err_idx[8];
791 uint32_t num_err, i;
792 uint32_t ecc1, ecc2, ecc3, ecc4;
793
794 num_err = (readl_relaxed(FSMC_NAND_REG(regs, bank, STS)) >> 10) & 0xF;
795
796 /* no bit flipping */
797 if (likely(num_err == 0))
798 return 0;
799
800 /* too many errors */
801 if (unlikely(num_err > 8)) {
802 /*
803 * This is a temporary erase check. A newly erased page read
804 * would result in an ecc error because the oob data is also
805 * erased to FF and the calculated ecc for an FF data is not
806 * FF..FF.
807 * This is a workaround to skip performing correction in case
808 * data is FF..FF
809 *
810 * Logic:
811 * For every page, each bit written as 0 is counted until these
812 * number of bits are greater than 8 (the maximum correction
813 * capability of FSMC for each 512 + 13 bytes)
814 */
815
816 int bits_ecc = count_written_bits(read_ecc, chip->ecc.bytes, 8);
817 int bits_data = count_written_bits(dat, chip->ecc.size, 8);
818
819 if ((bits_ecc + bits_data) <= 8) {
820 if (bits_data)
821 memset(dat, 0xff, chip->ecc.size);
822 return bits_data;
823 }
824
825 return -EBADMSG;
826 }
827
828 /*
829 * ------------------- calc_ecc[] bit wise -----------|--13 bits--|
830 * |---idx[7]--|--.....-----|---idx[2]--||---idx[1]--||---idx[0]--|
831 *
832 * calc_ecc is a 104 bit information containing maximum of 8 error
833 * offset informations of 13 bits each. calc_ecc is copied into a
834 * uint64_t array and error offset indexes are populated in err_idx
835 * array
836 */
837 ecc1 = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC1));
838 ecc2 = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC2));
839 ecc3 = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC3));
840 ecc4 = readl_relaxed(FSMC_NAND_REG(regs, bank, STS));
841
842 err_idx[0] = (ecc1 >> 0) & 0x1FFF;
843 err_idx[1] = (ecc1 >> 13) & 0x1FFF;
844 err_idx[2] = (((ecc2 >> 0) & 0x7F) << 6) | ((ecc1 >> 26) & 0x3F);
845 err_idx[3] = (ecc2 >> 7) & 0x1FFF;
846 err_idx[4] = (((ecc3 >> 0) & 0x1) << 12) | ((ecc2 >> 20) & 0xFFF);
847 err_idx[5] = (ecc3 >> 1) & 0x1FFF;
848 err_idx[6] = (ecc3 >> 14) & 0x1FFF;
849 err_idx[7] = (((ecc4 >> 16) & 0xFF) << 5) | ((ecc3 >> 27) & 0x1F);
850
851 i = 0;
852 while (num_err--) {
853 change_bit(0, (unsigned long *)&err_idx[i]);
854 change_bit(1, (unsigned long *)&err_idx[i]);
855
856 if (err_idx[i] < chip->ecc.size * 8) {
857 change_bit(err_idx[i], (unsigned long *)dat);
858 i++;
859 }
860 }
861 return i;
862 }
863
filter(struct dma_chan * chan,void * slave)864 static bool filter(struct dma_chan *chan, void *slave)
865 {
866 chan->private = slave;
867 return true;
868 }
869
870 #ifdef CONFIG_OF
fsmc_nand_probe_config_dt(struct platform_device * pdev,struct device_node * np)871 static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
872 struct device_node *np)
873 {
874 struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
875 u32 val;
876
877 /* Set default NAND width to 8 bits */
878 pdata->width = 8;
879 if (!of_property_read_u32(np, "bank-width", &val)) {
880 if (val == 2) {
881 pdata->width = 16;
882 } else if (val != 1) {
883 dev_err(&pdev->dev, "invalid bank-width %u\n", val);
884 return -EINVAL;
885 }
886 }
887 if (of_get_property(np, "nand-skip-bbtscan", NULL))
888 pdata->options = NAND_SKIP_BBTSCAN;
889
890 pdata->nand_timings = devm_kzalloc(&pdev->dev,
891 sizeof(*pdata->nand_timings), GFP_KERNEL);
892 if (!pdata->nand_timings)
893 return -ENOMEM;
894 of_property_read_u8_array(np, "timings", (u8 *)pdata->nand_timings,
895 sizeof(*pdata->nand_timings));
896
897 /* Set default NAND bank to 0 */
898 pdata->bank = 0;
899 if (!of_property_read_u32(np, "bank", &val)) {
900 if (val > 3) {
901 dev_err(&pdev->dev, "invalid bank %u\n", val);
902 return -EINVAL;
903 }
904 pdata->bank = val;
905 }
906 return 0;
907 }
908 #else
fsmc_nand_probe_config_dt(struct platform_device * pdev,struct device_node * np)909 static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
910 struct device_node *np)
911 {
912 return -ENOSYS;
913 }
914 #endif
915
916 /*
917 * fsmc_nand_probe - Probe function
918 * @pdev: platform device structure
919 */
fsmc_nand_probe(struct platform_device * pdev)920 static int __init fsmc_nand_probe(struct platform_device *pdev)
921 {
922 struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
923 struct device_node __maybe_unused *np = pdev->dev.of_node;
924 struct mtd_part_parser_data ppdata = {};
925 struct fsmc_nand_data *host;
926 struct mtd_info *mtd;
927 struct nand_chip *nand;
928 struct resource *res;
929 dma_cap_mask_t mask;
930 int ret = 0;
931 u32 pid;
932 int i;
933
934 if (np) {
935 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
936 pdev->dev.platform_data = pdata;
937 ret = fsmc_nand_probe_config_dt(pdev, np);
938 if (ret) {
939 dev_err(&pdev->dev, "no platform data\n");
940 return -ENODEV;
941 }
942 }
943
944 if (!pdata) {
945 dev_err(&pdev->dev, "platform data is NULL\n");
946 return -EINVAL;
947 }
948
949 /* Allocate memory for the device structure (and zero it) */
950 host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
951 if (!host)
952 return -ENOMEM;
953
954 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data");
955 host->data_va = devm_ioremap_resource(&pdev->dev, res);
956 if (IS_ERR(host->data_va))
957 return PTR_ERR(host->data_va);
958
959 host->data_pa = (dma_addr_t)res->start;
960
961 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_addr");
962 host->addr_va = devm_ioremap_resource(&pdev->dev, res);
963 if (IS_ERR(host->addr_va))
964 return PTR_ERR(host->addr_va);
965
966 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_cmd");
967 host->cmd_va = devm_ioremap_resource(&pdev->dev, res);
968 if (IS_ERR(host->cmd_va))
969 return PTR_ERR(host->cmd_va);
970
971 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fsmc_regs");
972 host->regs_va = devm_ioremap_resource(&pdev->dev, res);
973 if (IS_ERR(host->regs_va))
974 return PTR_ERR(host->regs_va);
975
976 host->clk = clk_get(&pdev->dev, NULL);
977 if (IS_ERR(host->clk)) {
978 dev_err(&pdev->dev, "failed to fetch block clock\n");
979 return PTR_ERR(host->clk);
980 }
981
982 ret = clk_prepare_enable(host->clk);
983 if (ret)
984 goto err_clk_prepare_enable;
985
986 /*
987 * This device ID is actually a common AMBA ID as used on the
988 * AMBA PrimeCell bus. However it is not a PrimeCell.
989 */
990 for (pid = 0, i = 0; i < 4; i++)
991 pid |= (readl(host->regs_va + resource_size(res) - 0x20 + 4 * i) & 255) << (i * 8);
992 host->pid = pid;
993 dev_info(&pdev->dev, "FSMC device partno %03x, manufacturer %02x, "
994 "revision %02x, config %02x\n",
995 AMBA_PART_BITS(pid), AMBA_MANF_BITS(pid),
996 AMBA_REV_BITS(pid), AMBA_CONFIG_BITS(pid));
997
998 host->bank = pdata->bank;
999 host->select_chip = pdata->select_bank;
1000 host->partitions = pdata->partitions;
1001 host->nr_partitions = pdata->nr_partitions;
1002 host->dev = &pdev->dev;
1003 host->dev_timings = pdata->nand_timings;
1004 host->mode = pdata->mode;
1005
1006 if (host->mode == USE_DMA_ACCESS)
1007 init_completion(&host->dma_access_complete);
1008
1009 /* Link all private pointers */
1010 mtd = &host->mtd;
1011 nand = &host->nand;
1012 mtd->priv = nand;
1013 nand->priv = host;
1014
1015 host->mtd.owner = THIS_MODULE;
1016 nand->IO_ADDR_R = host->data_va;
1017 nand->IO_ADDR_W = host->data_va;
1018 nand->cmd_ctrl = fsmc_cmd_ctrl;
1019 nand->chip_delay = 30;
1020
1021 nand->ecc.mode = NAND_ECC_HW;
1022 nand->ecc.hwctl = fsmc_enable_hwecc;
1023 nand->ecc.size = 512;
1024 nand->options = pdata->options;
1025 nand->select_chip = fsmc_select_chip;
1026 nand->badblockbits = 7;
1027
1028 if (pdata->width == FSMC_NAND_BW16)
1029 nand->options |= NAND_BUSWIDTH_16;
1030
1031 switch (host->mode) {
1032 case USE_DMA_ACCESS:
1033 dma_cap_zero(mask);
1034 dma_cap_set(DMA_MEMCPY, mask);
1035 host->read_dma_chan = dma_request_channel(mask, filter,
1036 pdata->read_dma_priv);
1037 if (!host->read_dma_chan) {
1038 dev_err(&pdev->dev, "Unable to get read dma channel\n");
1039 goto err_req_read_chnl;
1040 }
1041 host->write_dma_chan = dma_request_channel(mask, filter,
1042 pdata->write_dma_priv);
1043 if (!host->write_dma_chan) {
1044 dev_err(&pdev->dev, "Unable to get write dma channel\n");
1045 goto err_req_write_chnl;
1046 }
1047 nand->read_buf = fsmc_read_buf_dma;
1048 nand->write_buf = fsmc_write_buf_dma;
1049 break;
1050
1051 default:
1052 case USE_WORD_ACCESS:
1053 nand->read_buf = fsmc_read_buf;
1054 nand->write_buf = fsmc_write_buf;
1055 break;
1056 }
1057
1058 fsmc_nand_setup(host->regs_va, host->bank,
1059 nand->options & NAND_BUSWIDTH_16,
1060 host->dev_timings);
1061
1062 if (AMBA_REV_BITS(host->pid) >= 8) {
1063 nand->ecc.read_page = fsmc_read_page_hwecc;
1064 nand->ecc.calculate = fsmc_read_hwecc_ecc4;
1065 nand->ecc.correct = fsmc_bch8_correct_data;
1066 nand->ecc.bytes = 13;
1067 nand->ecc.strength = 8;
1068 } else {
1069 nand->ecc.calculate = fsmc_read_hwecc_ecc1;
1070 nand->ecc.correct = nand_correct_data;
1071 nand->ecc.bytes = 3;
1072 nand->ecc.strength = 1;
1073 }
1074
1075 /*
1076 * Scan to find existence of the device
1077 */
1078 if (nand_scan_ident(&host->mtd, 1, NULL)) {
1079 ret = -ENXIO;
1080 dev_err(&pdev->dev, "No NAND Device found!\n");
1081 goto err_scan_ident;
1082 }
1083
1084 if (AMBA_REV_BITS(host->pid) >= 8) {
1085 switch (host->mtd.oobsize) {
1086 case 16:
1087 nand->ecc.layout = &fsmc_ecc4_16_layout;
1088 host->ecc_place = &fsmc_ecc4_sp_place;
1089 break;
1090 case 64:
1091 nand->ecc.layout = &fsmc_ecc4_64_layout;
1092 host->ecc_place = &fsmc_ecc4_lp_place;
1093 break;
1094 case 128:
1095 nand->ecc.layout = &fsmc_ecc4_128_layout;
1096 host->ecc_place = &fsmc_ecc4_lp_place;
1097 break;
1098 case 224:
1099 nand->ecc.layout = &fsmc_ecc4_224_layout;
1100 host->ecc_place = &fsmc_ecc4_lp_place;
1101 break;
1102 case 256:
1103 nand->ecc.layout = &fsmc_ecc4_256_layout;
1104 host->ecc_place = &fsmc_ecc4_lp_place;
1105 break;
1106 default:
1107 dev_warn(&pdev->dev, "No oob scheme defined for oobsize %d\n",
1108 mtd->oobsize);
1109 BUG();
1110 }
1111 } else {
1112 switch (host->mtd.oobsize) {
1113 case 16:
1114 nand->ecc.layout = &fsmc_ecc1_16_layout;
1115 break;
1116 case 64:
1117 nand->ecc.layout = &fsmc_ecc1_64_layout;
1118 break;
1119 case 128:
1120 nand->ecc.layout = &fsmc_ecc1_128_layout;
1121 break;
1122 default:
1123 dev_warn(&pdev->dev, "No oob scheme defined for oobsize %d\n",
1124 mtd->oobsize);
1125 BUG();
1126 }
1127 }
1128
1129 /* Second stage of scan to fill MTD data-structures */
1130 if (nand_scan_tail(&host->mtd)) {
1131 ret = -ENXIO;
1132 goto err_probe;
1133 }
1134
1135 /*
1136 * The partition information can is accessed by (in the same precedence)
1137 *
1138 * command line through Bootloader,
1139 * platform data,
1140 * default partition information present in driver.
1141 */
1142 /*
1143 * Check for partition info passed
1144 */
1145 host->mtd.name = "nand";
1146 ppdata.of_node = np;
1147 ret = mtd_device_parse_register(&host->mtd, NULL, &ppdata,
1148 host->partitions, host->nr_partitions);
1149 if (ret)
1150 goto err_probe;
1151
1152 platform_set_drvdata(pdev, host);
1153 dev_info(&pdev->dev, "FSMC NAND driver registration successful\n");
1154 return 0;
1155
1156 err_probe:
1157 err_scan_ident:
1158 if (host->mode == USE_DMA_ACCESS)
1159 dma_release_channel(host->write_dma_chan);
1160 err_req_write_chnl:
1161 if (host->mode == USE_DMA_ACCESS)
1162 dma_release_channel(host->read_dma_chan);
1163 err_req_read_chnl:
1164 clk_disable_unprepare(host->clk);
1165 err_clk_prepare_enable:
1166 clk_put(host->clk);
1167 return ret;
1168 }
1169
1170 /*
1171 * Clean up routine
1172 */
fsmc_nand_remove(struct platform_device * pdev)1173 static int fsmc_nand_remove(struct platform_device *pdev)
1174 {
1175 struct fsmc_nand_data *host = platform_get_drvdata(pdev);
1176
1177 if (host) {
1178 nand_release(&host->mtd);
1179
1180 if (host->mode == USE_DMA_ACCESS) {
1181 dma_release_channel(host->write_dma_chan);
1182 dma_release_channel(host->read_dma_chan);
1183 }
1184 clk_disable_unprepare(host->clk);
1185 clk_put(host->clk);
1186 }
1187
1188 return 0;
1189 }
1190
1191 #ifdef CONFIG_PM_SLEEP
fsmc_nand_suspend(struct device * dev)1192 static int fsmc_nand_suspend(struct device *dev)
1193 {
1194 struct fsmc_nand_data *host = dev_get_drvdata(dev);
1195 if (host)
1196 clk_disable_unprepare(host->clk);
1197 return 0;
1198 }
1199
fsmc_nand_resume(struct device * dev)1200 static int fsmc_nand_resume(struct device *dev)
1201 {
1202 struct fsmc_nand_data *host = dev_get_drvdata(dev);
1203 if (host) {
1204 clk_prepare_enable(host->clk);
1205 fsmc_nand_setup(host->regs_va, host->bank,
1206 host->nand.options & NAND_BUSWIDTH_16,
1207 host->dev_timings);
1208 }
1209 return 0;
1210 }
1211 #endif
1212
1213 static SIMPLE_DEV_PM_OPS(fsmc_nand_pm_ops, fsmc_nand_suspend, fsmc_nand_resume);
1214
1215 #ifdef CONFIG_OF
1216 static const struct of_device_id fsmc_nand_id_table[] = {
1217 { .compatible = "st,spear600-fsmc-nand" },
1218 { .compatible = "stericsson,fsmc-nand" },
1219 {}
1220 };
1221 MODULE_DEVICE_TABLE(of, fsmc_nand_id_table);
1222 #endif
1223
1224 static struct platform_driver fsmc_nand_driver = {
1225 .remove = fsmc_nand_remove,
1226 .driver = {
1227 .owner = THIS_MODULE,
1228 .name = "fsmc-nand",
1229 .of_match_table = of_match_ptr(fsmc_nand_id_table),
1230 .pm = &fsmc_nand_pm_ops,
1231 },
1232 };
1233
1234 module_platform_driver_probe(fsmc_nand_driver, fsmc_nand_probe);
1235
1236 MODULE_LICENSE("GPL");
1237 MODULE_AUTHOR("Vipin Kumar <vipin.kumar@st.com>, Ashish Priyadarshi");
1238 MODULE_DESCRIPTION("NAND driver for SPEAr Platforms");
1239