• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * rx1950.c  --  ALSA Soc Audio Layer
3  *
4  * Copyright (c) 2010 Vasily Khoruzhick <anarsoul@gmail.com>
5  *
6  * Based on smdk2440.c and magician.c
7  *
8  * Authors: Graeme Gregory graeme.gregory@wolfsonmicro.com
9  *          Philipp Zabel <philipp.zabel@gmail.com>
10  *          Denis Grigoriev <dgreenday@gmail.com>
11  *          Vasily Khoruzhick <anarsoul@gmail.com>
12  *
13  *  This program is free software; you can redistribute  it and/or modify it
14  *  under  the terms of  the GNU General  Public License as published by the
15  *  Free Software Foundation;  either version 2 of the  License, or (at your
16  *  option) any later version.
17  *
18  */
19 
20 #include <linux/types.h>
21 #include <linux/gpio.h>
22 #include <linux/module.h>
23 
24 #include <sound/soc.h>
25 #include <sound/jack.h>
26 
27 #include <mach/gpio-samsung.h>
28 #include "regs-iis.h"
29 #include <asm/mach-types.h>
30 
31 #include "s3c24xx-i2s.h"
32 
33 static int rx1950_uda1380_init(struct snd_soc_pcm_runtime *rtd);
34 static int rx1950_uda1380_card_remove(struct snd_soc_card *card);
35 static int rx1950_startup(struct snd_pcm_substream *substream);
36 static int rx1950_hw_params(struct snd_pcm_substream *substream,
37 				struct snd_pcm_hw_params *params);
38 static int rx1950_spk_power(struct snd_soc_dapm_widget *w,
39 				struct snd_kcontrol *kcontrol, int event);
40 
41 static unsigned int rates[] = {
42 	16000,
43 	44100,
44 	48000,
45 };
46 
47 static struct snd_pcm_hw_constraint_list hw_rates = {
48 	.count = ARRAY_SIZE(rates),
49 	.list = rates,
50 	.mask = 0,
51 };
52 
53 static struct snd_soc_jack hp_jack;
54 
55 static struct snd_soc_jack_pin hp_jack_pins[] = {
56 	{
57 		.pin	= "Headphone Jack",
58 		.mask	= SND_JACK_HEADPHONE,
59 	},
60 	{
61 		.pin	= "Speaker",
62 		.mask	= SND_JACK_HEADPHONE,
63 		.invert	= 1,
64 	},
65 };
66 
67 static struct snd_soc_jack_gpio hp_jack_gpios[] = {
68 	[0] = {
69 		.gpio			= S3C2410_GPG(12),
70 		.name			= "hp-gpio",
71 		.report			= SND_JACK_HEADPHONE,
72 		.invert			= 1,
73 		.debounce_time		= 200,
74 	},
75 };
76 
77 static struct snd_soc_ops rx1950_ops = {
78 	.startup	= rx1950_startup,
79 	.hw_params	= rx1950_hw_params,
80 };
81 
82 /* s3c24xx digital audio interface glue - connects codec <--> CPU */
83 static struct snd_soc_dai_link rx1950_uda1380_dai[] = {
84 	{
85 		.name		= "uda1380",
86 		.stream_name	= "UDA1380 Duplex",
87 		.cpu_dai_name	= "s3c24xx-iis",
88 		.codec_dai_name	= "uda1380-hifi",
89 		.init		= rx1950_uda1380_init,
90 		.platform_name	= "s3c24xx-iis",
91 		.codec_name	= "uda1380-codec.0-001a",
92 		.ops		= &rx1950_ops,
93 	},
94 };
95 
96 /* rx1950 machine dapm widgets */
97 static const struct snd_soc_dapm_widget uda1380_dapm_widgets[] = {
98 	SND_SOC_DAPM_HP("Headphone Jack", NULL),
99 	SND_SOC_DAPM_MIC("Mic Jack", NULL),
100 	SND_SOC_DAPM_SPK("Speaker", rx1950_spk_power),
101 };
102 
103 /* rx1950 machine audio_map */
104 static const struct snd_soc_dapm_route audio_map[] = {
105 	/* headphone connected to VOUTLHP, VOUTRHP */
106 	{"Headphone Jack", NULL, "VOUTLHP"},
107 	{"Headphone Jack", NULL, "VOUTRHP"},
108 
109 	/* ext speaker connected to VOUTL, VOUTR  */
110 	{"Speaker", NULL, "VOUTL"},
111 	{"Speaker", NULL, "VOUTR"},
112 
113 	/* mic is connected to VINM */
114 	{"VINM", NULL, "Mic Jack"},
115 };
116 
117 static struct snd_soc_card rx1950_asoc = {
118 	.name = "rx1950",
119 	.owner = THIS_MODULE,
120 	.remove = rx1950_uda1380_card_remove,
121 	.dai_link = rx1950_uda1380_dai,
122 	.num_links = ARRAY_SIZE(rx1950_uda1380_dai),
123 
124 	.dapm_widgets = uda1380_dapm_widgets,
125 	.num_dapm_widgets = ARRAY_SIZE(uda1380_dapm_widgets),
126 	.dapm_routes = audio_map,
127 	.num_dapm_routes = ARRAY_SIZE(audio_map),
128 };
129 
130 static struct platform_device *s3c24xx_snd_device;
131 
rx1950_startup(struct snd_pcm_substream * substream)132 static int rx1950_startup(struct snd_pcm_substream *substream)
133 {
134 	struct snd_pcm_runtime *runtime = substream->runtime;
135 
136 	return snd_pcm_hw_constraint_list(runtime, 0,
137 					SNDRV_PCM_HW_PARAM_RATE,
138 					&hw_rates);
139 }
140 
rx1950_spk_power(struct snd_soc_dapm_widget * w,struct snd_kcontrol * kcontrol,int event)141 static int rx1950_spk_power(struct snd_soc_dapm_widget *w,
142 				struct snd_kcontrol *kcontrol, int event)
143 {
144 	if (SND_SOC_DAPM_EVENT_ON(event))
145 		gpio_set_value(S3C2410_GPA(1), 1);
146 	else
147 		gpio_set_value(S3C2410_GPA(1), 0);
148 
149 	return 0;
150 }
151 
rx1950_hw_params(struct snd_pcm_substream * substream,struct snd_pcm_hw_params * params)152 static int rx1950_hw_params(struct snd_pcm_substream *substream,
153 				struct snd_pcm_hw_params *params)
154 {
155 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
156 	struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
157 	struct snd_soc_dai *codec_dai = rtd->codec_dai;
158 	int div;
159 	int ret;
160 	unsigned int rate = params_rate(params);
161 	int clk_source, fs_mode;
162 
163 	switch (rate) {
164 	case 16000:
165 	case 48000:
166 		clk_source = S3C24XX_CLKSRC_PCLK;
167 		fs_mode = S3C2410_IISMOD_256FS;
168 		div = s3c24xx_i2s_get_clockrate() / (256 * rate);
169 		if (s3c24xx_i2s_get_clockrate() % (256 * rate) > (128 * rate))
170 			div++;
171 		break;
172 	case 44100:
173 	case 88200:
174 		clk_source = S3C24XX_CLKSRC_MPLL;
175 		fs_mode = S3C2410_IISMOD_384FS;
176 		div = 1;
177 		break;
178 	default:
179 		printk(KERN_ERR "%s: rate %d is not supported\n",
180 			__func__, rate);
181 		return -EINVAL;
182 	}
183 
184 	/* set codec DAI configuration */
185 	ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
186 		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
187 	if (ret < 0)
188 		return ret;
189 
190 	/* set cpu DAI configuration */
191 	ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
192 		SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
193 	if (ret < 0)
194 		return ret;
195 
196 	/* select clock source */
197 	ret = snd_soc_dai_set_sysclk(cpu_dai, clk_source, rate,
198 			SND_SOC_CLOCK_OUT);
199 	if (ret < 0)
200 		return ret;
201 
202 	/* set MCLK division for sample rate */
203 	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK,
204 		fs_mode);
205 	if (ret < 0)
206 		return ret;
207 
208 	/* set BCLK division for sample rate */
209 	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_BCLK,
210 		S3C2410_IISMOD_32FS);
211 	if (ret < 0)
212 		return ret;
213 
214 	/* set prescaler division for sample rate */
215 	ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
216 		S3C24XX_PRESCALE(div, div));
217 	if (ret < 0)
218 		return ret;
219 
220 	return 0;
221 }
222 
rx1950_uda1380_init(struct snd_soc_pcm_runtime * rtd)223 static int rx1950_uda1380_init(struct snd_soc_pcm_runtime *rtd)
224 {
225 	struct snd_soc_codec *codec = rtd->codec;
226 
227 	snd_soc_jack_new(codec, "Headphone Jack", SND_JACK_HEADPHONE,
228 		&hp_jack);
229 
230 	snd_soc_jack_add_pins(&hp_jack, ARRAY_SIZE(hp_jack_pins),
231 		hp_jack_pins);
232 
233 	snd_soc_jack_add_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios),
234 		hp_jack_gpios);
235 
236 	return 0;
237 }
238 
rx1950_uda1380_card_remove(struct snd_soc_card * card)239 static int rx1950_uda1380_card_remove(struct snd_soc_card *card)
240 {
241 	snd_soc_jack_free_gpios(&hp_jack, ARRAY_SIZE(hp_jack_gpios),
242 		hp_jack_gpios);
243 
244 	return 0;
245 }
246 
rx1950_init(void)247 static int __init rx1950_init(void)
248 {
249 	int ret;
250 
251 	if (!machine_is_rx1950())
252 		return -ENODEV;
253 
254 	/* configure some gpios */
255 	ret = gpio_request(S3C2410_GPA(1), "speaker-power");
256 	if (ret)
257 		goto err_gpio;
258 
259 	ret = gpio_direction_output(S3C2410_GPA(1), 0);
260 	if (ret)
261 		goto err_gpio_conf;
262 
263 	s3c24xx_snd_device = platform_device_alloc("soc-audio", -1);
264 	if (!s3c24xx_snd_device) {
265 		ret = -ENOMEM;
266 		goto err_plat_alloc;
267 	}
268 
269 	platform_set_drvdata(s3c24xx_snd_device, &rx1950_asoc);
270 	ret = platform_device_add(s3c24xx_snd_device);
271 
272 	if (ret) {
273 		platform_device_put(s3c24xx_snd_device);
274 		goto err_plat_add;
275 	}
276 
277 	return 0;
278 
279 err_plat_add:
280 err_plat_alloc:
281 err_gpio_conf:
282 	gpio_free(S3C2410_GPA(1));
283 
284 err_gpio:
285 	return ret;
286 }
287 
rx1950_exit(void)288 static void __exit rx1950_exit(void)
289 {
290 	platform_device_unregister(s3c24xx_snd_device);
291 	gpio_free(S3C2410_GPA(1));
292 }
293 
294 module_init(rx1950_init);
295 module_exit(rx1950_exit);
296 
297 /* Module information */
298 MODULE_AUTHOR("Vasily Khoruzhick");
299 MODULE_DESCRIPTION("ALSA SoC RX1950");
300 MODULE_LICENSE("GPL");
301