1 /*
2 * iop13xx platform Initialization
3 * Copyright (c) 2005-2006, Intel Corporation.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms and conditions of the GNU General Public License,
7 * version 2, as published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * You should have received a copy of the GNU General Public License along with
15 * this program; if not, write to the Free Software Foundation, Inc., 59 Temple
16 * Place - Suite 330, Boston, MA 02111-1307 USA.
17 *
18 */
19
20 #include <linux/dma-mapping.h>
21 #include <linux/serial_8250.h>
22 #include <linux/io.h>
23 #ifdef CONFIG_MTD_PHYSMAP
24 #include <linux/mtd/physmap.h>
25 #endif
26 #include <asm/mach/map.h>
27 #include <mach/hardware.h>
28 #include <asm/irq.h>
29 #include <asm/hardware/iop_adma.h>
30
31 #define IOP13XX_UART_XTAL 33334000
32 #define IOP13XX_SETUP_DEBUG 0
33 #define PRINTK(x...) ((void)(IOP13XX_SETUP_DEBUG && printk(x)))
34
35 /* Standard IO mapping for all IOP13XX based systems
36 */
37 static struct map_desc iop13xx_std_desc[] __initdata = {
38 { /* mem mapped registers */
39 .virtual = IOP13XX_PMMR_VIRT_MEM_BASE,
40 .pfn = __phys_to_pfn(IOP13XX_PMMR_PHYS_MEM_BASE),
41 .length = IOP13XX_PMMR_SIZE,
42 .type = MT_DEVICE,
43 }, { /* PCIE IO space */
44 .virtual = IOP13XX_PCIE_LOWER_IO_VA,
45 .pfn = __phys_to_pfn(IOP13XX_PCIE_LOWER_IO_PA),
46 .length = IOP13XX_PCIX_IO_WINDOW_SIZE,
47 .type = MT_DEVICE,
48 }, { /* PCIX IO space */
49 .virtual = IOP13XX_PCIX_LOWER_IO_VA,
50 .pfn = __phys_to_pfn(IOP13XX_PCIX_LOWER_IO_PA),
51 .length = IOP13XX_PCIX_IO_WINDOW_SIZE,
52 .type = MT_DEVICE,
53 },
54 };
55
56 static struct resource iop13xx_uart0_resources[] = {
57 [0] = {
58 .start = IOP13XX_UART0_PHYS,
59 .end = IOP13XX_UART0_PHYS + 0x3f,
60 .flags = IORESOURCE_MEM,
61 },
62 [1] = {
63 .start = IRQ_IOP13XX_UART0,
64 .end = IRQ_IOP13XX_UART0,
65 .flags = IORESOURCE_IRQ
66 }
67 };
68
69 static struct resource iop13xx_uart1_resources[] = {
70 [0] = {
71 .start = IOP13XX_UART1_PHYS,
72 .end = IOP13XX_UART1_PHYS + 0x3f,
73 .flags = IORESOURCE_MEM,
74 },
75 [1] = {
76 .start = IRQ_IOP13XX_UART1,
77 .end = IRQ_IOP13XX_UART1,
78 .flags = IORESOURCE_IRQ
79 }
80 };
81
82 static struct plat_serial8250_port iop13xx_uart0_data[] = {
83 {
84 .membase = (char*)(IOP13XX_UART0_VIRT),
85 .mapbase = (IOP13XX_UART0_PHYS),
86 .irq = IRQ_IOP13XX_UART0,
87 .uartclk = IOP13XX_UART_XTAL,
88 .regshift = 2,
89 .iotype = UPIO_MEM,
90 .flags = UPF_SKIP_TEST,
91 },
92 { },
93 };
94
95 static struct plat_serial8250_port iop13xx_uart1_data[] = {
96 {
97 .membase = (char*)(IOP13XX_UART1_VIRT),
98 .mapbase = (IOP13XX_UART1_PHYS),
99 .irq = IRQ_IOP13XX_UART1,
100 .uartclk = IOP13XX_UART_XTAL,
101 .regshift = 2,
102 .iotype = UPIO_MEM,
103 .flags = UPF_SKIP_TEST,
104 },
105 { },
106 };
107
108 /* The ids are fixed up later in iop13xx_platform_init */
109 static struct platform_device iop13xx_uart0 = {
110 .name = "serial8250",
111 .id = 0,
112 .dev.platform_data = iop13xx_uart0_data,
113 .num_resources = 2,
114 .resource = iop13xx_uart0_resources,
115 };
116
117 static struct platform_device iop13xx_uart1 = {
118 .name = "serial8250",
119 .id = 0,
120 .dev.platform_data = iop13xx_uart1_data,
121 .num_resources = 2,
122 .resource = iop13xx_uart1_resources
123 };
124
125 static struct resource iop13xx_i2c_0_resources[] = {
126 [0] = {
127 .start = IOP13XX_I2C0_PHYS,
128 .end = IOP13XX_I2C0_PHYS + 0x18,
129 .flags = IORESOURCE_MEM,
130 },
131 [1] = {
132 .start = IRQ_IOP13XX_I2C_0,
133 .end = IRQ_IOP13XX_I2C_0,
134 .flags = IORESOURCE_IRQ
135 }
136 };
137
138 static struct resource iop13xx_i2c_1_resources[] = {
139 [0] = {
140 .start = IOP13XX_I2C1_PHYS,
141 .end = IOP13XX_I2C1_PHYS + 0x18,
142 .flags = IORESOURCE_MEM,
143 },
144 [1] = {
145 .start = IRQ_IOP13XX_I2C_1,
146 .end = IRQ_IOP13XX_I2C_1,
147 .flags = IORESOURCE_IRQ
148 }
149 };
150
151 static struct resource iop13xx_i2c_2_resources[] = {
152 [0] = {
153 .start = IOP13XX_I2C2_PHYS,
154 .end = IOP13XX_I2C2_PHYS + 0x18,
155 .flags = IORESOURCE_MEM,
156 },
157 [1] = {
158 .start = IRQ_IOP13XX_I2C_2,
159 .end = IRQ_IOP13XX_I2C_2,
160 .flags = IORESOURCE_IRQ
161 }
162 };
163
164 /* I2C controllers. The IOP13XX uses the same block as the IOP3xx, so
165 * we just use the same device name.
166 */
167
168 /* The ids are fixed up later in iop13xx_platform_init */
169 static struct platform_device iop13xx_i2c_0_controller = {
170 .name = "IOP3xx-I2C",
171 .id = 0,
172 .num_resources = 2,
173 .resource = iop13xx_i2c_0_resources
174 };
175
176 static struct platform_device iop13xx_i2c_1_controller = {
177 .name = "IOP3xx-I2C",
178 .id = 0,
179 .num_resources = 2,
180 .resource = iop13xx_i2c_1_resources
181 };
182
183 static struct platform_device iop13xx_i2c_2_controller = {
184 .name = "IOP3xx-I2C",
185 .id = 0,
186 .num_resources = 2,
187 .resource = iop13xx_i2c_2_resources
188 };
189
190 #ifdef CONFIG_MTD_PHYSMAP
191 /* PBI Flash Device
192 */
193 static struct physmap_flash_data iq8134x_flash_data = {
194 .width = 2,
195 };
196
197 static struct resource iq8134x_flash_resource = {
198 .start = IQ81340_FLASHBASE,
199 .end = 0,
200 .flags = IORESOURCE_MEM,
201 };
202
203 static struct platform_device iq8134x_flash = {
204 .name = "physmap-flash",
205 .id = 0,
206 .dev = { .platform_data = &iq8134x_flash_data, },
207 .num_resources = 1,
208 .resource = &iq8134x_flash_resource,
209 };
210
iq8134x_probe_flash_size(void)211 static unsigned long iq8134x_probe_flash_size(void)
212 {
213 uint8_t __iomem *flash_addr = ioremap(IQ81340_FLASHBASE, PAGE_SIZE);
214 int i;
215 char query[3];
216 unsigned long size = 0;
217 int width = iq8134x_flash_data.width;
218
219 if (flash_addr) {
220 /* send CFI 'query' command */
221 writew(0x98, flash_addr);
222
223 /* check for CFI compliance */
224 for (i = 0; i < 3 * width; i += width)
225 query[i / width] = readb(flash_addr + (0x10 * width) + i);
226
227 /* read the size */
228 if (memcmp(query, "QRY", 3) == 0)
229 size = 1 << readb(flash_addr + (0x27 * width));
230
231 /* send CFI 'read array' command */
232 writew(0xff, flash_addr);
233
234 iounmap(flash_addr);
235 }
236
237 return size;
238 }
239 #endif
240
241 /* ADMA Channels */
242 static struct resource iop13xx_adma_0_resources[] = {
243 [0] = {
244 .start = IOP13XX_ADMA_PHYS_BASE(0),
245 .end = IOP13XX_ADMA_UPPER_PA(0),
246 .flags = IORESOURCE_MEM,
247 },
248 [1] = {
249 .start = IRQ_IOP13XX_ADMA0_EOT,
250 .end = IRQ_IOP13XX_ADMA0_EOT,
251 .flags = IORESOURCE_IRQ
252 },
253 [2] = {
254 .start = IRQ_IOP13XX_ADMA0_EOC,
255 .end = IRQ_IOP13XX_ADMA0_EOC,
256 .flags = IORESOURCE_IRQ
257 },
258 [3] = {
259 .start = IRQ_IOP13XX_ADMA0_ERR,
260 .end = IRQ_IOP13XX_ADMA0_ERR,
261 .flags = IORESOURCE_IRQ
262 }
263 };
264
265 static struct resource iop13xx_adma_1_resources[] = {
266 [0] = {
267 .start = IOP13XX_ADMA_PHYS_BASE(1),
268 .end = IOP13XX_ADMA_UPPER_PA(1),
269 .flags = IORESOURCE_MEM,
270 },
271 [1] = {
272 .start = IRQ_IOP13XX_ADMA1_EOT,
273 .end = IRQ_IOP13XX_ADMA1_EOT,
274 .flags = IORESOURCE_IRQ
275 },
276 [2] = {
277 .start = IRQ_IOP13XX_ADMA1_EOC,
278 .end = IRQ_IOP13XX_ADMA1_EOC,
279 .flags = IORESOURCE_IRQ
280 },
281 [3] = {
282 .start = IRQ_IOP13XX_ADMA1_ERR,
283 .end = IRQ_IOP13XX_ADMA1_ERR,
284 .flags = IORESOURCE_IRQ
285 }
286 };
287
288 static struct resource iop13xx_adma_2_resources[] = {
289 [0] = {
290 .start = IOP13XX_ADMA_PHYS_BASE(2),
291 .end = IOP13XX_ADMA_UPPER_PA(2),
292 .flags = IORESOURCE_MEM,
293 },
294 [1] = {
295 .start = IRQ_IOP13XX_ADMA2_EOT,
296 .end = IRQ_IOP13XX_ADMA2_EOT,
297 .flags = IORESOURCE_IRQ
298 },
299 [2] = {
300 .start = IRQ_IOP13XX_ADMA2_EOC,
301 .end = IRQ_IOP13XX_ADMA2_EOC,
302 .flags = IORESOURCE_IRQ
303 },
304 [3] = {
305 .start = IRQ_IOP13XX_ADMA2_ERR,
306 .end = IRQ_IOP13XX_ADMA2_ERR,
307 .flags = IORESOURCE_IRQ
308 }
309 };
310
311 static u64 iop13xx_adma_dmamask = DMA_BIT_MASK(64);
312 static struct iop_adma_platform_data iop13xx_adma_0_data = {
313 .hw_id = 0,
314 .pool_size = PAGE_SIZE,
315 };
316
317 static struct iop_adma_platform_data iop13xx_adma_1_data = {
318 .hw_id = 1,
319 .pool_size = PAGE_SIZE,
320 };
321
322 static struct iop_adma_platform_data iop13xx_adma_2_data = {
323 .hw_id = 2,
324 .pool_size = PAGE_SIZE,
325 };
326
327 /* The ids are fixed up later in iop13xx_platform_init */
328 static struct platform_device iop13xx_adma_0_channel = {
329 .name = "iop-adma",
330 .id = 0,
331 .num_resources = 4,
332 .resource = iop13xx_adma_0_resources,
333 .dev = {
334 .dma_mask = &iop13xx_adma_dmamask,
335 .coherent_dma_mask = DMA_BIT_MASK(64),
336 .platform_data = (void *) &iop13xx_adma_0_data,
337 },
338 };
339
340 static struct platform_device iop13xx_adma_1_channel = {
341 .name = "iop-adma",
342 .id = 0,
343 .num_resources = 4,
344 .resource = iop13xx_adma_1_resources,
345 .dev = {
346 .dma_mask = &iop13xx_adma_dmamask,
347 .coherent_dma_mask = DMA_BIT_MASK(64),
348 .platform_data = (void *) &iop13xx_adma_1_data,
349 },
350 };
351
352 static struct platform_device iop13xx_adma_2_channel = {
353 .name = "iop-adma",
354 .id = 0,
355 .num_resources = 4,
356 .resource = iop13xx_adma_2_resources,
357 .dev = {
358 .dma_mask = &iop13xx_adma_dmamask,
359 .coherent_dma_mask = DMA_BIT_MASK(64),
360 .platform_data = (void *) &iop13xx_adma_2_data,
361 },
362 };
363
iop13xx_map_io(void)364 void __init iop13xx_map_io(void)
365 {
366 /* Initialize the Static Page Table maps */
367 iotable_init(iop13xx_std_desc, ARRAY_SIZE(iop13xx_std_desc));
368 }
369
370 static int init_uart;
371 static int init_i2c;
372 static int init_adma;
373
iop13xx_platform_init(void)374 void __init iop13xx_platform_init(void)
375 {
376 int i;
377 u32 uart_idx, i2c_idx, adma_idx, plat_idx;
378 struct platform_device *iop13xx_devices[IQ81340_MAX_PLAT_DEVICES];
379
380 /* set the bases so we can read the device id */
381 iop13xx_set_atu_mmr_bases();
382
383 memset(iop13xx_devices, 0, sizeof(iop13xx_devices));
384
385 if (init_uart == IOP13XX_INIT_UART_DEFAULT) {
386 switch (iop13xx_dev_id()) {
387 /* enable both uarts on iop341 */
388 case 0x3380:
389 case 0x3384:
390 case 0x3388:
391 case 0x338c:
392 init_uart |= IOP13XX_INIT_UART_0;
393 init_uart |= IOP13XX_INIT_UART_1;
394 break;
395 /* only enable uart 1 */
396 default:
397 init_uart |= IOP13XX_INIT_UART_1;
398 }
399 }
400
401 if (init_i2c == IOP13XX_INIT_I2C_DEFAULT) {
402 switch (iop13xx_dev_id()) {
403 /* enable all i2c units on iop341 and iop342 */
404 case 0x3380:
405 case 0x3384:
406 case 0x3388:
407 case 0x338c:
408 case 0x3382:
409 case 0x3386:
410 case 0x338a:
411 case 0x338e:
412 init_i2c |= IOP13XX_INIT_I2C_0;
413 init_i2c |= IOP13XX_INIT_I2C_1;
414 init_i2c |= IOP13XX_INIT_I2C_2;
415 break;
416 /* only enable i2c 1 and 2 */
417 default:
418 init_i2c |= IOP13XX_INIT_I2C_1;
419 init_i2c |= IOP13XX_INIT_I2C_2;
420 }
421 }
422
423 if (init_adma == IOP13XX_INIT_ADMA_DEFAULT) {
424 init_adma |= IOP13XX_INIT_ADMA_0;
425 init_adma |= IOP13XX_INIT_ADMA_1;
426 init_adma |= IOP13XX_INIT_ADMA_2;
427 }
428
429 plat_idx = 0;
430 uart_idx = 0;
431 i2c_idx = 0;
432
433 /* uart 1 (if enabled) is ttyS0 */
434 if (init_uart & IOP13XX_INIT_UART_1) {
435 PRINTK("Adding uart1 to platform device list\n");
436 iop13xx_uart1.id = uart_idx++;
437 iop13xx_devices[plat_idx++] = &iop13xx_uart1;
438 }
439 if (init_uart & IOP13XX_INIT_UART_0) {
440 PRINTK("Adding uart0 to platform device list\n");
441 iop13xx_uart0.id = uart_idx++;
442 iop13xx_devices[plat_idx++] = &iop13xx_uart0;
443 }
444
445 for(i = 0; i < IQ81340_NUM_I2C; i++) {
446 if ((init_i2c & (1 << i)) && IOP13XX_SETUP_DEBUG)
447 printk("Adding i2c%d to platform device list\n", i);
448 switch(init_i2c & (1 << i)) {
449 case IOP13XX_INIT_I2C_0:
450 iop13xx_i2c_0_controller.id = i2c_idx++;
451 iop13xx_devices[plat_idx++] =
452 &iop13xx_i2c_0_controller;
453 break;
454 case IOP13XX_INIT_I2C_1:
455 iop13xx_i2c_1_controller.id = i2c_idx++;
456 iop13xx_devices[plat_idx++] =
457 &iop13xx_i2c_1_controller;
458 break;
459 case IOP13XX_INIT_I2C_2:
460 iop13xx_i2c_2_controller.id = i2c_idx++;
461 iop13xx_devices[plat_idx++] =
462 &iop13xx_i2c_2_controller;
463 break;
464 }
465 }
466
467 /* initialize adma channel ids and capabilities */
468 adma_idx = 0;
469 for (i = 0; i < IQ81340_NUM_ADMA; i++) {
470 struct iop_adma_platform_data *plat_data;
471 if ((init_adma & (1 << i)) && IOP13XX_SETUP_DEBUG)
472 printk(KERN_INFO
473 "Adding adma%d to platform device list\n", i);
474 switch (init_adma & (1 << i)) {
475 case IOP13XX_INIT_ADMA_0:
476 iop13xx_adma_0_channel.id = adma_idx++;
477 iop13xx_devices[plat_idx++] = &iop13xx_adma_0_channel;
478 plat_data = &iop13xx_adma_0_data;
479 dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
480 dma_cap_set(DMA_XOR, plat_data->cap_mask);
481 dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
482 dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
483 dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
484 break;
485 case IOP13XX_INIT_ADMA_1:
486 iop13xx_adma_1_channel.id = adma_idx++;
487 iop13xx_devices[plat_idx++] = &iop13xx_adma_1_channel;
488 plat_data = &iop13xx_adma_1_data;
489 dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
490 dma_cap_set(DMA_XOR, plat_data->cap_mask);
491 dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
492 dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
493 dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
494 break;
495 case IOP13XX_INIT_ADMA_2:
496 iop13xx_adma_2_channel.id = adma_idx++;
497 iop13xx_devices[plat_idx++] = &iop13xx_adma_2_channel;
498 plat_data = &iop13xx_adma_2_data;
499 dma_cap_set(DMA_MEMCPY, plat_data->cap_mask);
500 dma_cap_set(DMA_XOR, plat_data->cap_mask);
501 dma_cap_set(DMA_XOR_VAL, plat_data->cap_mask);
502 dma_cap_set(DMA_MEMSET, plat_data->cap_mask);
503 dma_cap_set(DMA_INTERRUPT, plat_data->cap_mask);
504 dma_cap_set(DMA_PQ, plat_data->cap_mask);
505 dma_cap_set(DMA_PQ_VAL, plat_data->cap_mask);
506 break;
507 }
508 }
509
510 #ifdef CONFIG_MTD_PHYSMAP
511 iq8134x_flash_resource.end = iq8134x_flash_resource.start +
512 iq8134x_probe_flash_size() - 1;
513 if (iq8134x_flash_resource.end > iq8134x_flash_resource.start)
514 iop13xx_devices[plat_idx++] = &iq8134x_flash;
515 else
516 printk(KERN_ERR "%s: Failed to probe flash size\n", __func__);
517 #endif
518
519 platform_add_devices(iop13xx_devices, plat_idx);
520 }
521
iop13xx_init_uart_setup(char * str)522 static int __init iop13xx_init_uart_setup(char *str)
523 {
524 if (str) {
525 while (*str != '\0') {
526 switch(*str) {
527 case '0':
528 init_uart |= IOP13XX_INIT_UART_0;
529 break;
530 case '1':
531 init_uart |= IOP13XX_INIT_UART_1;
532 break;
533 case ',':
534 case '=':
535 break;
536 default:
537 PRINTK("\"iop13xx_init_uart\" malformed"
538 " at character: \'%c\'", *str);
539 *(str + 1) = '\0';
540 init_uart = IOP13XX_INIT_UART_DEFAULT;
541 }
542 str++;
543 }
544 }
545 return 1;
546 }
547
iop13xx_init_i2c_setup(char * str)548 static int __init iop13xx_init_i2c_setup(char *str)
549 {
550 if (str) {
551 while (*str != '\0') {
552 switch(*str) {
553 case '0':
554 init_i2c |= IOP13XX_INIT_I2C_0;
555 break;
556 case '1':
557 init_i2c |= IOP13XX_INIT_I2C_1;
558 break;
559 case '2':
560 init_i2c |= IOP13XX_INIT_I2C_2;
561 break;
562 case ',':
563 case '=':
564 break;
565 default:
566 PRINTK("\"iop13xx_init_i2c\" malformed"
567 " at character: \'%c\'", *str);
568 *(str + 1) = '\0';
569 init_i2c = IOP13XX_INIT_I2C_DEFAULT;
570 }
571 str++;
572 }
573 }
574 return 1;
575 }
576
iop13xx_init_adma_setup(char * str)577 static int __init iop13xx_init_adma_setup(char *str)
578 {
579 if (str) {
580 while (*str != '\0') {
581 switch (*str) {
582 case '0':
583 init_adma |= IOP13XX_INIT_ADMA_0;
584 break;
585 case '1':
586 init_adma |= IOP13XX_INIT_ADMA_1;
587 break;
588 case '2':
589 init_adma |= IOP13XX_INIT_ADMA_2;
590 break;
591 case ',':
592 case '=':
593 break;
594 default:
595 PRINTK("\"iop13xx_init_adma\" malformed"
596 " at character: \'%c\'", *str);
597 *(str + 1) = '\0';
598 init_adma = IOP13XX_INIT_ADMA_DEFAULT;
599 }
600 str++;
601 }
602 }
603 return 1;
604 }
605
606 __setup("iop13xx_init_adma", iop13xx_init_adma_setup);
607 __setup("iop13xx_init_uart", iop13xx_init_uart_setup);
608 __setup("iop13xx_init_i2c", iop13xx_init_i2c_setup);
609
iop13xx_restart(char mode,const char * cmd)610 void iop13xx_restart(char mode, const char *cmd)
611 {
612 /*
613 * Reset the internal bus (warning both cores are reset)
614 */
615 write_wdtcr(IOP_WDTCR_EN_ARM);
616 write_wdtcr(IOP_WDTCR_EN);
617 write_wdtsr(IOP13XX_WDTSR_WRITE_EN | IOP13XX_WDTCR_IB_RESET);
618 write_wdtcr(0x1000);
619 }
620