• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /* linux/arch/arm/mach-msm/board-trout-mddi.c
2 ** Author: Brian Swetland <swetland@google.com>
3 */
4 #include <linux/gpio.h>
5 #include <linux/kernel.h>
6 #include <linux/init.h>
7 #include <linux/platform_device.h>
8 #include <linux/delay.h>
9 #include <linux/leds.h>
10 #include <linux/clk.h>
11 #include <linux/err.h>
12 
13 #include <asm/io.h>
14 #include <asm/mach-types.h>
15 #include <asm/system_info.h>
16 
17 #include <mach/msm_fb.h>
18 #include <mach/vreg.h>
19 
20 #include "board-trout.h"
21 #include "proc_comm.h"
22 #include "devices.h"
23 
24 #define TROUT_DEFAULT_BACKLIGHT_BRIGHTNESS 255
25 
26 #define MDDI_CLIENT_CORE_BASE  0x108000
27 #define LCD_CONTROL_BLOCK_BASE 0x110000
28 #define SPI_BLOCK_BASE         0x120000
29 #define I2C_BLOCK_BASE         0x130000
30 #define PWM_BLOCK_BASE         0x140000
31 #define GPIO_BLOCK_BASE        0x150000
32 #define SYSTEM_BLOCK1_BASE     0x160000
33 #define SYSTEM_BLOCK2_BASE     0x170000
34 
35 
36 #define	DPSUS       (MDDI_CLIENT_CORE_BASE|0x24)
37 #define	SYSCLKENA   (MDDI_CLIENT_CORE_BASE|0x2C)
38 #define	PWM0OFF	      (PWM_BLOCK_BASE|0x1C)
39 
40 #define V_VDDE2E_VDD2_GPIO 0
41 #define MDDI_RST_N 82
42 
43 #define	MDDICAP0    (MDDI_CLIENT_CORE_BASE|0x00)
44 #define	MDDICAP1    (MDDI_CLIENT_CORE_BASE|0x04)
45 #define	MDDICAP2    (MDDI_CLIENT_CORE_BASE|0x08)
46 #define	MDDICAP3    (MDDI_CLIENT_CORE_BASE|0x0C)
47 #define	MDCAPCHG    (MDDI_CLIENT_CORE_BASE|0x10)
48 #define	MDCRCERC    (MDDI_CLIENT_CORE_BASE|0x14)
49 #define	TTBUSSEL    (MDDI_CLIENT_CORE_BASE|0x18)
50 #define	DPSET0      (MDDI_CLIENT_CORE_BASE|0x1C)
51 #define	DPSET1      (MDDI_CLIENT_CORE_BASE|0x20)
52 #define	DPSUS       (MDDI_CLIENT_CORE_BASE|0x24)
53 #define	DPRUN       (MDDI_CLIENT_CORE_BASE|0x28)
54 #define	SYSCKENA    (MDDI_CLIENT_CORE_BASE|0x2C)
55 #define	TESTMODE    (MDDI_CLIENT_CORE_BASE|0x30)
56 #define	FIFOMONI    (MDDI_CLIENT_CORE_BASE|0x34)
57 #define	INTMONI     (MDDI_CLIENT_CORE_BASE|0x38)
58 #define	MDIOBIST    (MDDI_CLIENT_CORE_BASE|0x3C)
59 #define	MDIOPSET    (MDDI_CLIENT_CORE_BASE|0x40)
60 #define	BITMAP0     (MDDI_CLIENT_CORE_BASE|0x44)
61 #define	BITMAP1     (MDDI_CLIENT_CORE_BASE|0x48)
62 #define	BITMAP2     (MDDI_CLIENT_CORE_BASE|0x4C)
63 #define	BITMAP3     (MDDI_CLIENT_CORE_BASE|0x50)
64 #define	BITMAP4     (MDDI_CLIENT_CORE_BASE|0x54)
65 
66 #define	SRST        (LCD_CONTROL_BLOCK_BASE|0x00)
67 #define	PORT_ENB    (LCD_CONTROL_BLOCK_BASE|0x04)
68 #define	START       (LCD_CONTROL_BLOCK_BASE|0x08)
69 #define	PORT        (LCD_CONTROL_BLOCK_BASE|0x0C)
70 #define	CMN         (LCD_CONTROL_BLOCK_BASE|0x10)
71 #define	GAMMA       (LCD_CONTROL_BLOCK_BASE|0x14)
72 #define	INTFLG      (LCD_CONTROL_BLOCK_BASE|0x18)
73 #define	INTMSK      (LCD_CONTROL_BLOCK_BASE|0x1C)
74 #define	MPLFBUF     (LCD_CONTROL_BLOCK_BASE|0x20)
75 #define	HDE_LEFT    (LCD_CONTROL_BLOCK_BASE|0x24)
76 #define	VDE_TOP     (LCD_CONTROL_BLOCK_BASE|0x28)
77 #define	PXL         (LCD_CONTROL_BLOCK_BASE|0x30)
78 #define	HCYCLE      (LCD_CONTROL_BLOCK_BASE|0x34)
79 #define	HSW         (LCD_CONTROL_BLOCK_BASE|0x38)
80 #define	HDE_START   (LCD_CONTROL_BLOCK_BASE|0x3C)
81 #define	HDE_SIZE    (LCD_CONTROL_BLOCK_BASE|0x40)
82 #define	VCYCLE      (LCD_CONTROL_BLOCK_BASE|0x44)
83 #define	VSW         (LCD_CONTROL_BLOCK_BASE|0x48)
84 #define	VDE_START   (LCD_CONTROL_BLOCK_BASE|0x4C)
85 #define	VDE_SIZE    (LCD_CONTROL_BLOCK_BASE|0x50)
86 #define	WAKEUP      (LCD_CONTROL_BLOCK_BASE|0x54)
87 #define	WSYN_DLY    (LCD_CONTROL_BLOCK_BASE|0x58)
88 #define	REGENB      (LCD_CONTROL_BLOCK_BASE|0x5C)
89 #define	VSYNIF      (LCD_CONTROL_BLOCK_BASE|0x60)
90 #define	WRSTB       (LCD_CONTROL_BLOCK_BASE|0x64)
91 #define	RDSTB       (LCD_CONTROL_BLOCK_BASE|0x68)
92 #define	ASY_DATA    (LCD_CONTROL_BLOCK_BASE|0x6C)
93 #define	ASY_DATB    (LCD_CONTROL_BLOCK_BASE|0x70)
94 #define	ASY_DATC    (LCD_CONTROL_BLOCK_BASE|0x74)
95 #define	ASY_DATD    (LCD_CONTROL_BLOCK_BASE|0x78)
96 #define	ASY_DATE    (LCD_CONTROL_BLOCK_BASE|0x7C)
97 #define	ASY_DATF    (LCD_CONTROL_BLOCK_BASE|0x80)
98 #define	ASY_DATG    (LCD_CONTROL_BLOCK_BASE|0x84)
99 #define	ASY_DATH    (LCD_CONTROL_BLOCK_BASE|0x88)
100 #define	ASY_CMDSET  (LCD_CONTROL_BLOCK_BASE|0x8C)
101 
102 #define	SSICTL      (SPI_BLOCK_BASE|0x00)
103 #define	SSITIME     (SPI_BLOCK_BASE|0x04)
104 #define	SSITX       (SPI_BLOCK_BASE|0x08)
105 #define	SSIRX       (SPI_BLOCK_BASE|0x0C)
106 #define	SSIINTC     (SPI_BLOCK_BASE|0x10)
107 #define	SSIINTS     (SPI_BLOCK_BASE|0x14)
108 #define	SSIDBG1     (SPI_BLOCK_BASE|0x18)
109 #define	SSIDBG2     (SPI_BLOCK_BASE|0x1C)
110 #define	SSIID       (SPI_BLOCK_BASE|0x20)
111 
112 #define	WKREQ       (SYSTEM_BLOCK1_BASE|0x00)
113 #define	CLKENB      (SYSTEM_BLOCK1_BASE|0x04)
114 #define	DRAMPWR     (SYSTEM_BLOCK1_BASE|0x08)
115 #define	INTMASK     (SYSTEM_BLOCK1_BASE|0x0C)
116 #define	GPIOSEL     (SYSTEM_BLOCK2_BASE|0x00)
117 
118 #define	GPIODATA    (GPIO_BLOCK_BASE|0x00)
119 #define	GPIODIR     (GPIO_BLOCK_BASE|0x04)
120 #define	GPIOIS      (GPIO_BLOCK_BASE|0x08)
121 #define	GPIOIBE     (GPIO_BLOCK_BASE|0x0C)
122 #define	GPIOIEV     (GPIO_BLOCK_BASE|0x10)
123 #define	GPIOIE      (GPIO_BLOCK_BASE|0x14)
124 #define	GPIORIS     (GPIO_BLOCK_BASE|0x18)
125 #define	GPIOMIS     (GPIO_BLOCK_BASE|0x1C)
126 #define	GPIOIC      (GPIO_BLOCK_BASE|0x20)
127 #define	GPIOOMS     (GPIO_BLOCK_BASE|0x24)
128 #define	GPIOPC      (GPIO_BLOCK_BASE|0x28)
129 #define	GPIOID      (GPIO_BLOCK_BASE|0x30)
130 
131 #define SPI_WRITE(reg, val) \
132 	{ SSITX,        0x00010000 | (((reg) & 0xff) << 8) | ((val) & 0xff) }, \
133 	{ 0, 5 },
134 
135 #define SPI_WRITE1(reg) \
136 	{ SSITX,        (reg) & 0xff }, \
137 	{ 0, 5 },
138 
139 struct mddi_table {
140 	uint32_t reg;
141 	uint32_t value;
142 };
143 static struct mddi_table mddi_toshiba_init_table[] = {
144 	{ DPSET0,       0x09e90046 },
145 	{ DPSET1,       0x00000118 },
146 	{ DPSUS,        0x00000000 },
147 	{ DPRUN,        0x00000001 },
148 	{ 1,            14         }, /* msleep 14 */
149 	{ SYSCKENA,     0x00000001 },
150 	{ CLKENB,       0x0000A1EF },  /*    # SYS.CLKENB  # Enable clocks for each module (without DCLK , i2cCLK) */
151 
152 	{ GPIODATA,     0x02000200 },  /*   # GPI .GPIODATA  # GPIO2(RESET_LCD_N) set to 0 , GPIO3(eDRAM_Power) set to 0 */
153 	{ GPIODIR,      0x000030D  },  /* 24D   # GPI .GPIODIR  # Select direction of GPIO port (0,2,3,6,9 output) */
154 	{ GPIOSEL,      0/*0x00000173*/},  /*   # SYS.GPIOSEL  # GPIO port multiplexing control */
155 	{ GPIOPC,       0x03C300C0 },  /*   # GPI .GPIOPC  # GPIO2,3 PD cut */
156 	{ WKREQ,        0x00000000 },  /*   # SYS.WKREQ  # Wake-up request event is VSYNC alignment */
157 
158 	{ GPIOIBE,      0x000003FF },
159 	{ GPIOIS,       0x00000000 },
160 	{ GPIOIC,       0x000003FF },
161 	{ GPIOIE,       0x00000000 },
162 
163 	{ GPIODATA,     0x00040004 },  /*   # GPI .GPIODATA  # eDRAM VD supply */
164 	{ 1,            1          }, /* msleep 1 */
165 	{ GPIODATA,     0x02040004 },  /*   # GPI .GPIODATA  # eDRAM VD supply */
166 	{ DRAMPWR,      0x00000001 }, /* eDRAM power */
167 };
168 
169 #define GPIOSEL_VWAKEINT (1U << 0)
170 #define INTMASK_VWAKEOUT (1U << 0)
171 
172 
173 static struct clk *gp_clk;
174 static int trout_new_backlight = 1;
175 static struct vreg *vreg_mddi_1v5;
176 static struct vreg *vreg_lcm_2v85;
177 
trout_process_mddi_table(struct msm_mddi_client_data * client_data,struct mddi_table * table,size_t count)178 static void trout_process_mddi_table(struct msm_mddi_client_data *client_data,
179 				     struct mddi_table *table, size_t count)
180 {
181 	int i;
182 	for (i = 0; i < count; i++) {
183 		uint32_t reg = table[i].reg;
184 		uint32_t value = table[i].value;
185 
186 		if (reg == 0)
187 			udelay(value);
188 		else if (reg == 1)
189 			msleep(value);
190 		else
191 			client_data->remote_write(client_data, value, reg);
192 	}
193 }
194 
trout_mddi_toshiba_client_init(struct msm_mddi_bridge_platform_data * bridge_data,struct msm_mddi_client_data * client_data)195 static int trout_mddi_toshiba_client_init(
196 	struct msm_mddi_bridge_platform_data *bridge_data,
197 	struct msm_mddi_client_data *client_data)
198 {
199 	int panel_id;
200 
201 	client_data->auto_hibernate(client_data, 0);
202 	trout_process_mddi_table(client_data, mddi_toshiba_init_table,
203 				 ARRAY_SIZE(mddi_toshiba_init_table));
204 	client_data->auto_hibernate(client_data, 1);
205 	panel_id = (client_data->remote_read(client_data, GPIODATA) >> 4) & 3;
206 	if (panel_id > 1) {
207 		printk(KERN_WARNING "unknown panel id at mddi_enable\n");
208 		return -1;
209 	}
210 	return 0;
211 }
212 
trout_mddi_toshiba_client_uninit(struct msm_mddi_bridge_platform_data * bridge_data,struct msm_mddi_client_data * client_data)213 static int trout_mddi_toshiba_client_uninit(
214 	struct msm_mddi_bridge_platform_data *bridge_data,
215 	struct msm_mddi_client_data *client_data)
216 {
217 	return 0;
218 }
219 
220 static struct resource resources_msm_fb[] = {
221 	{
222 		.start = MSM_FB_BASE,
223 		.end = MSM_FB_BASE + MSM_FB_SIZE,
224 		.flags = IORESOURCE_MEM,
225 	},
226 };
227 
228 struct msm_mddi_bridge_platform_data toshiba_client_data = {
229 	.init = trout_mddi_toshiba_client_init,
230 	.uninit = trout_mddi_toshiba_client_uninit,
231 	.fb_data = {
232 		.xres = 320,
233 		.yres = 480,
234 		.width = 45,
235 		.height = 67,
236 		.output_format = 0,
237 	},
238 };
239 
240 static struct msm_mddi_platform_data mddi_pdata = {
241 	.clk_rate = 122880000,
242 	.fb_resource = resources_msm_fb,
243 	.num_clients = 1,
244 	.client_platform_data = {
245 		{
246 			.product_id = (0xd263 << 16 | 0),
247 			.name = "mddi_c_d263_0000",
248 			.id = 0,
249 			.client_data = &toshiba_client_data,
250 			.clk_rate = 0,
251 		},
252 	},
253 };
254 
trout_init_panel(void)255 int __init trout_init_panel(void)
256 {
257 	int rc;
258 
259 	if (!machine_is_trout())
260 		return 0;
261 	vreg_mddi_1v5 = vreg_get(0, "gp2");
262 	if (IS_ERR(vreg_mddi_1v5))
263 		return PTR_ERR(vreg_mddi_1v5);
264 	vreg_lcm_2v85 = vreg_get(0, "gp4");
265 	if (IS_ERR(vreg_lcm_2v85))
266 		return PTR_ERR(vreg_lcm_2v85);
267 
268 	trout_new_backlight = system_rev >= 5;
269 	if (trout_new_backlight) {
270 		uint32_t config = PCOM_GPIO_CFG(27, 0, GPIO_OUTPUT,
271 						GPIO_NO_PULL, GPIO_8MA);
272 		msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0);
273 	} else {
274 		uint32_t config = PCOM_GPIO_CFG(27, 1, GPIO_OUTPUT,
275 						GPIO_NO_PULL, GPIO_8MA);
276 		msm_proc_comm(PCOM_RPC_GPIO_TLMM_CONFIG_EX, &config, 0);
277 
278 		gp_clk = clk_get(NULL, "gp_clk");
279 		if (IS_ERR(gp_clk)) {
280 			printk(KERN_ERR "trout_init_panel: could not get gp"
281 			       "clock\n");
282 			gp_clk = NULL;
283 		}
284 		rc = clk_set_rate(gp_clk, 19200000);
285 		if (rc)
286 			printk(KERN_ERR "trout_init_panel: set clock rate "
287 			       "failed\n");
288 	}
289 
290 	rc = platform_device_register(&msm_device_mdp);
291 	if (rc)
292 		return rc;
293 	msm_device_mddi0.dev.platform_data = &mddi_pdata;
294 	return platform_device_register(&msm_device_mddi0);
295 }
296 
297 device_initcall(trout_init_panel);
298