1 /*
2 * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation
3 *
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU General Public License
6 * as published by the Free Software Foundation; either version 2
7 * of the License, or (at your option) any later version.
8 *
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
13 *
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
17 */
18 #include <linux/kernel.h>
19 #include <linux/init.h>
20 #include <linux/linkage.h>
21 #include <linux/interrupt.h>
22 #include <linux/smp.h>
23 #include <linux/spinlock.h>
24 #include <linux/mm.h>
25 #include <linux/kernel_stat.h>
26
27 #include <asm/errno.h>
28 #include <asm/irq_regs.h>
29 #include <asm/signal.h>
30 #include <asm/io.h>
31
32 #include <asm/sibyte/bcm1480_regs.h>
33 #include <asm/sibyte/bcm1480_int.h>
34 #include <asm/sibyte/bcm1480_scd.h>
35
36 #include <asm/sibyte/sb1250_uart.h>
37 #include <asm/sibyte/sb1250.h>
38
39 /*
40 * These are the routines that handle all the low level interrupt stuff.
41 * Actions handled here are: initialization of the interrupt map, requesting of
42 * interrupt lines by handlers, dispatching if interrupts to handlers, probing
43 * for interrupt lines
44 */
45
46 #ifdef CONFIG_PCI
47 extern unsigned long ht_eoi_space;
48 #endif
49
50 /* Store the CPU id (not the logical number) */
51 int bcm1480_irq_owner[BCM1480_NR_IRQS];
52
53 static DEFINE_RAW_SPINLOCK(bcm1480_imr_lock);
54
bcm1480_mask_irq(int cpu,int irq)55 void bcm1480_mask_irq(int cpu, int irq)
56 {
57 unsigned long flags, hl_spacing;
58 u64 cur_ints;
59
60 raw_spin_lock_irqsave(&bcm1480_imr_lock, flags);
61 hl_spacing = 0;
62 if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) {
63 hl_spacing = BCM1480_IMR_HL_SPACING;
64 irq -= BCM1480_NR_IRQS_HALF;
65 }
66 cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
67 cur_ints |= (((u64) 1) << irq);
68 ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
69 raw_spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
70 }
71
bcm1480_unmask_irq(int cpu,int irq)72 void bcm1480_unmask_irq(int cpu, int irq)
73 {
74 unsigned long flags, hl_spacing;
75 u64 cur_ints;
76
77 raw_spin_lock_irqsave(&bcm1480_imr_lock, flags);
78 hl_spacing = 0;
79 if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) {
80 hl_spacing = BCM1480_IMR_HL_SPACING;
81 irq -= BCM1480_NR_IRQS_HALF;
82 }
83 cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
84 cur_ints &= ~(((u64) 1) << irq);
85 ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing));
86 raw_spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
87 }
88
89 #ifdef CONFIG_SMP
bcm1480_set_affinity(struct irq_data * d,const struct cpumask * mask,bool force)90 static int bcm1480_set_affinity(struct irq_data *d, const struct cpumask *mask,
91 bool force)
92 {
93 unsigned int irq_dirty, irq = d->irq;
94 int i = 0, old_cpu, cpu, int_on, k;
95 u64 cur_ints;
96 unsigned long flags;
97
98 i = cpumask_first(mask);
99
100 /* Convert logical CPU to physical CPU */
101 cpu = cpu_logical_map(i);
102
103 /* Protect against other affinity changers and IMR manipulation */
104 raw_spin_lock_irqsave(&bcm1480_imr_lock, flags);
105
106 /* Swizzle each CPU's IMR (but leave the IP selection alone) */
107 old_cpu = bcm1480_irq_owner[irq];
108 irq_dirty = irq;
109 if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) {
110 irq_dirty -= BCM1480_NR_IRQS_HALF;
111 }
112
113 for (k=0; k<2; k++) { /* Loop through high and low interrupt mask register */
114 cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
115 int_on = !(cur_ints & (((u64) 1) << irq_dirty));
116 if (int_on) {
117 /* If it was on, mask it */
118 cur_ints |= (((u64) 1) << irq_dirty);
119 ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
120 }
121 bcm1480_irq_owner[irq] = cpu;
122 if (int_on) {
123 /* unmask for the new CPU */
124 cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
125 cur_ints &= ~(((u64) 1) << irq_dirty);
126 ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
127 }
128 }
129 raw_spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
130
131 return 0;
132 }
133 #endif
134
135
136 /*****************************************************************************/
137
disable_bcm1480_irq(struct irq_data * d)138 static void disable_bcm1480_irq(struct irq_data *d)
139 {
140 unsigned int irq = d->irq;
141
142 bcm1480_mask_irq(bcm1480_irq_owner[irq], irq);
143 }
144
enable_bcm1480_irq(struct irq_data * d)145 static void enable_bcm1480_irq(struct irq_data *d)
146 {
147 unsigned int irq = d->irq;
148
149 bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq);
150 }
151
152
ack_bcm1480_irq(struct irq_data * d)153 static void ack_bcm1480_irq(struct irq_data *d)
154 {
155 unsigned int irq_dirty, irq = d->irq;
156 u64 pending;
157 int k;
158
159 /*
160 * If the interrupt was an HT interrupt, now is the time to
161 * clear it. NOTE: we assume the HT bridge was set up to
162 * deliver the interrupts to all CPUs (which makes affinity
163 * changing easier for us)
164 */
165 irq_dirty = irq;
166 if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) {
167 irq_dirty -= BCM1480_NR_IRQS_HALF;
168 }
169 for (k=0; k<2; k++) { /* Loop through high and low LDT interrupts */
170 pending = __raw_readq(IOADDR(A_BCM1480_IMR_REGISTER(bcm1480_irq_owner[irq],
171 R_BCM1480_IMR_LDT_INTERRUPT_H + (k*BCM1480_IMR_HL_SPACING))));
172 pending &= ((u64)1 << (irq_dirty));
173 if (pending) {
174 #ifdef CONFIG_SMP
175 int i;
176 for (i=0; i<NR_CPUS; i++) {
177 /*
178 * Clear for all CPUs so an affinity switch
179 * doesn't find an old status
180 */
181 __raw_writeq(pending, IOADDR(A_BCM1480_IMR_REGISTER(cpu_logical_map(i),
182 R_BCM1480_IMR_LDT_INTERRUPT_CLR_H + (k*BCM1480_IMR_HL_SPACING))));
183 }
184 #else
185 __raw_writeq(pending, IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_LDT_INTERRUPT_CLR_H + (k*BCM1480_IMR_HL_SPACING))));
186 #endif
187
188 /*
189 * Generate EOI. For Pass 1 parts, EOI is a nop. For
190 * Pass 2, the LDT world may be edge-triggered, but
191 * this EOI shouldn't hurt. If they are
192 * level-sensitive, the EOI is required.
193 */
194 #ifdef CONFIG_PCI
195 if (ht_eoi_space)
196 *(uint32_t *)(ht_eoi_space+(irq<<16)+(7<<2)) = 0;
197 #endif
198 }
199 }
200 bcm1480_mask_irq(bcm1480_irq_owner[irq], irq);
201 }
202
203 static struct irq_chip bcm1480_irq_type = {
204 .name = "BCM1480-IMR",
205 .irq_mask_ack = ack_bcm1480_irq,
206 .irq_mask = disable_bcm1480_irq,
207 .irq_unmask = enable_bcm1480_irq,
208 #ifdef CONFIG_SMP
209 .irq_set_affinity = bcm1480_set_affinity
210 #endif
211 };
212
init_bcm1480_irqs(void)213 void __init init_bcm1480_irqs(void)
214 {
215 int i;
216
217 for (i = 0; i < BCM1480_NR_IRQS; i++) {
218 irq_set_chip_and_handler(i, &bcm1480_irq_type,
219 handle_level_irq);
220 bcm1480_irq_owner[i] = 0;
221 }
222 }
223
224 /*
225 * init_IRQ is called early in the boot sequence from init/main.c. It
226 * is responsible for setting up the interrupt mapper and installing the
227 * handler that will be responsible for dispatching interrupts to the
228 * "right" place.
229 */
230 /*
231 * For now, map all interrupts to IP[2]. We could save
232 * some cycles by parceling out system interrupts to different
233 * IP lines, but keep it simple for bringup. We'll also direct
234 * all interrupts to a single CPU; we should probably route
235 * PCI and LDT to one cpu and everything else to the other
236 * to balance the load a bit.
237 *
238 * On the second cpu, everything is set to IP5, which is
239 * ignored, EXCEPT the mailbox interrupt. That one is
240 * set to IP[2] so it is handled. This is needed so we
241 * can do cross-cpu function calls, as required by SMP
242 */
243
244 #define IMR_IP2_VAL K_BCM1480_INT_MAP_I0
245 #define IMR_IP3_VAL K_BCM1480_INT_MAP_I1
246 #define IMR_IP4_VAL K_BCM1480_INT_MAP_I2
247 #define IMR_IP5_VAL K_BCM1480_INT_MAP_I3
248 #define IMR_IP6_VAL K_BCM1480_INT_MAP_I4
249
arch_init_irq(void)250 void __init arch_init_irq(void)
251 {
252 unsigned int i, cpu;
253 u64 tmp;
254 unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
255 STATUSF_IP1 | STATUSF_IP0;
256
257 /* Default everything to IP2 */
258 /* Start with _high registers which has no bit 0 interrupt source */
259 for (i = 1; i < BCM1480_NR_IRQS_HALF; i++) { /* was I0 */
260 for (cpu = 0; cpu < 4; cpu++) {
261 __raw_writeq(IMR_IP2_VAL,
262 IOADDR(A_BCM1480_IMR_REGISTER(cpu,
263 R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (i << 3)));
264 }
265 }
266
267 /* Now do _low registers */
268 for (i = 0; i < BCM1480_NR_IRQS_HALF; i++) {
269 for (cpu = 0; cpu < 4; cpu++) {
270 __raw_writeq(IMR_IP2_VAL,
271 IOADDR(A_BCM1480_IMR_REGISTER(cpu,
272 R_BCM1480_IMR_INTERRUPT_MAP_BASE_L) + (i << 3)));
273 }
274 }
275
276 init_bcm1480_irqs();
277
278 /*
279 * Map the high 16 bits of mailbox_0 registers to IP[3], for
280 * inter-cpu messages
281 */
282 /* Was I1 */
283 for (cpu = 0; cpu < 4; cpu++) {
284 __raw_writeq(IMR_IP3_VAL, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) +
285 (K_BCM1480_INT_MBOX_0_0 << 3)));
286 }
287
288
289 /* Clear the mailboxes. The firmware may leave them dirty */
290 for (cpu = 0; cpu < 4; cpu++) {
291 __raw_writeq(0xffffffffffffffffULL,
292 IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_0_CLR_CPU)));
293 __raw_writeq(0xffffffffffffffffULL,
294 IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_1_CLR_CPU)));
295 }
296
297
298 /* Mask everything except the high 16 bit of mailbox_0 registers for all cpus */
299 tmp = ~((u64) 0) ^ ( (((u64) 1) << K_BCM1480_INT_MBOX_0_0));
300 for (cpu = 0; cpu < 4; cpu++) {
301 __raw_writeq(tmp, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MASK_H)));
302 }
303 tmp = ~((u64) 0);
304 for (cpu = 0; cpu < 4; cpu++) {
305 __raw_writeq(tmp, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MASK_L)));
306 }
307
308 /*
309 * Note that the timer interrupts are also mapped, but this is
310 * done in bcm1480_time_init(). Also, the profiling driver
311 * does its own management of IP7.
312 */
313
314 /* Enable necessary IPs, disable the rest */
315 change_c0_status(ST0_IM, imask);
316 }
317
318 extern void bcm1480_mailbox_interrupt(void);
319
dispatch_ip2(void)320 static inline void dispatch_ip2(void)
321 {
322 unsigned long long mask_h, mask_l;
323 unsigned int cpu = smp_processor_id();
324 unsigned long base;
325
326 /*
327 * Default...we've hit an IP[2] interrupt, which means we've got to
328 * check the 1480 interrupt registers to figure out what to do. Need
329 * to detect which CPU we're on, now that smp_affinity is supported.
330 */
331 base = A_BCM1480_IMR_MAPPER(cpu);
332 mask_h = __raw_readq(
333 IOADDR(base + R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H));
334 mask_l = __raw_readq(
335 IOADDR(base + R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L));
336
337 if (mask_h) {
338 if (mask_h ^ 1)
339 do_IRQ(fls64(mask_h) - 1);
340 else if (mask_l)
341 do_IRQ(63 + fls64(mask_l));
342 }
343 }
344
plat_irq_dispatch(void)345 asmlinkage void plat_irq_dispatch(void)
346 {
347 unsigned int cpu = smp_processor_id();
348 unsigned int pending;
349
350 #ifdef CONFIG_SIBYTE_BCM1480_PROF
351 /* Set compare to count to silence count/compare timer interrupts */
352 write_c0_compare(read_c0_count());
353 #endif
354
355 pending = read_c0_cause() & read_c0_status();
356
357 #ifdef CONFIG_SIBYTE_BCM1480_PROF
358 if (pending & CAUSEF_IP7) /* Cpu performance counter interrupt */
359 sbprof_cpu_intr();
360 else
361 #endif
362
363 if (pending & CAUSEF_IP4)
364 do_IRQ(K_BCM1480_INT_TIMER_0 + cpu);
365 #ifdef CONFIG_SMP
366 else if (pending & CAUSEF_IP3)
367 bcm1480_mailbox_interrupt();
368 #endif
369
370 else if (pending & CAUSEF_IP2)
371 dispatch_ip2();
372 }
373