1/* 2 * P3060 Silicon/SoC Device Tree Source (post include) 3 * 4 * Copyright 2011 Freescale Semiconductor Inc. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions are met: 8 * * Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * * Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * * Neither the name of Freescale Semiconductor nor the 14 * names of its contributors may be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * 18 * ALTERNATIVELY, this software may be distributed under the terms of the 19 * GNU General Public License ("GPL") as published by the Free Software 20 * Foundation, either version 2 of that License or (at your option) any 21 * later version. 22 * 23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY 24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY 27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35&lbc { 36 compatible = "fsl,p3060-elbc", "fsl,elbc", "simple-bus"; 37 interrupts = <25 2 0 0>; 38 #address-cells = <2>; 39 #size-cells = <1>; 40}; 41 42/* controller at 0x200000 */ 43&pci0 { 44 compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2"; 45 device_type = "pci"; 46 #size-cells = <2>; 47 #address-cells = <3>; 48 bus-range = <0x0 0xff>; 49 clock-frequency = <33333333>; 50 interrupts = <16 2 1 15>; 51 pcie@0 { 52 reg = <0 0 0 0 0>; 53 #interrupt-cells = <1>; 54 #size-cells = <2>; 55 #address-cells = <3>; 56 device_type = "pci"; 57 interrupts = <16 2 1 15>; 58 interrupt-map-mask = <0xf800 0 0 7>; 59 interrupt-map = < 60 /* IDSEL 0x0 */ 61 0000 0 0 1 &mpic 40 1 0 0 62 0000 0 0 2 &mpic 1 1 0 0 63 0000 0 0 3 &mpic 2 1 0 0 64 0000 0 0 4 &mpic 3 1 0 0 65 >; 66 }; 67}; 68 69/* controller at 0x201000 */ 70&pci1 { 71 compatible = "fsl,p3060-pcie", "fsl,qoriq-pcie-v2.2"; 72 device_type = "pci"; 73 #size-cells = <2>; 74 #address-cells = <3>; 75 bus-range = <0 0xff>; 76 clock-frequency = <33333333>; 77 interrupts = <16 2 1 14>; 78 pcie@0 { 79 reg = <0 0 0 0 0>; 80 #interrupt-cells = <1>; 81 #size-cells = <2>; 82 #address-cells = <3>; 83 device_type = "pci"; 84 interrupts = <16 2 1 14>; 85 interrupt-map-mask = <0xf800 0 0 7>; 86 interrupt-map = < 87 /* IDSEL 0x0 */ 88 0000 0 0 1 &mpic 41 1 0 0 89 0000 0 0 2 &mpic 5 1 0 0 90 0000 0 0 3 &mpic 6 1 0 0 91 0000 0 0 4 &mpic 7 1 0 0 92 >; 93 }; 94}; 95 96&rio { 97 compatible = "fsl,srio"; 98 interrupts = <16 2 1 11>; 99 #address-cells = <2>; 100 #size-cells = <2>; 101 fsl,srio-rmu-handle = <&rmu>; 102 ranges; 103 104 port1 { 105 #address-cells = <2>; 106 #size-cells = <2>; 107 cell-index = <1>; 108 }; 109 110 port2 { 111 #address-cells = <2>; 112 #size-cells = <2>; 113 cell-index = <2>; 114 }; 115}; 116 117&dcsr { 118 #address-cells = <1>; 119 #size-cells = <1>; 120 compatible = "fsl,dcsr", "simple-bus"; 121 122 dcsr-epu@0 { 123 compatible = "fsl,dcsr-epu"; 124 interrupts = <52 2 0 0 125 84 2 0 0 126 85 2 0 0>; 127 reg = <0x0 0x1000>; 128 }; 129 dcsr-npc { 130 compatible = "fsl,dcsr-npc"; 131 reg = <0x1000 0x1000 0x1000000 0x8000>; 132 }; 133 dcsr-nxc@2000 { 134 compatible = "fsl,dcsr-nxc"; 135 reg = <0x2000 0x1000>; 136 }; 137 dcsr-corenet { 138 compatible = "fsl,dcsr-corenet"; 139 reg = <0x8000 0x1000 0xB0000 0x1000>; 140 }; 141 dcsr-dpaa@9000 { 142 compatible = "fsl,p3060-dcsr-dpaa", "fsl,dcsr-dpaa"; 143 reg = <0x9000 0x1000>; 144 }; 145 dcsr-ocn@11000 { 146 compatible = "fsl,p3060-dcsr-ocn", "fsl,dcsr-ocn"; 147 reg = <0x11000 0x1000>; 148 }; 149 dcsr-ddr@12000 { 150 compatible = "fsl,dcsr-ddr"; 151 dev-handle = <&ddr1>; 152 reg = <0x12000 0x1000>; 153 }; 154 dcsr-nal@18000 { 155 compatible = "fsl,p3060-dcsr-nal", "fsl,dcsr-nal"; 156 reg = <0x18000 0x1000>; 157 }; 158 dcsr-rcpm@22000 { 159 compatible = "fsl,p3060-dcsr-rcpm", "fsl,dcsr-rcpm"; 160 reg = <0x22000 0x1000>; 161 }; 162 dcsr-cpu-sb-proxy@40000 { 163 compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; 164 cpu-handle = <&cpu0>; 165 reg = <0x40000 0x1000>; 166 }; 167 dcsr-cpu-sb-proxy@41000 { 168 compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; 169 cpu-handle = <&cpu1>; 170 reg = <0x41000 0x1000>; 171 }; 172 dcsr-cpu-sb-proxy@44000 { 173 compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; 174 cpu-handle = <&cpu4>; 175 reg = <0x44000 0x1000>; 176 }; 177 dcsr-cpu-sb-proxy@45000 { 178 compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; 179 cpu-handle = <&cpu5>; 180 reg = <0x45000 0x1000>; 181 }; 182 dcsr-cpu-sb-proxy@46000 { 183 compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; 184 cpu-handle = <&cpu6>; 185 reg = <0x46000 0x1000>; 186 }; 187 dcsr-cpu-sb-proxy@47000 { 188 compatible = "fsl,dcsr-e500mc-sb-proxy", "fsl,dcsr-cpu-sb-proxy"; 189 cpu-handle = <&cpu7>; 190 reg = <0x47000 0x1000>; 191 }; 192 193}; 194 195&soc { 196 #address-cells = <1>; 197 #size-cells = <1>; 198 device_type = "soc"; 199 compatible = "simple-bus"; 200 201 soc-sram-error { 202 compatible = "fsl,soc-sram-error"; 203 interrupts = <16 2 1 29>; 204 }; 205 206 corenet-law@0 { 207 compatible = "fsl,corenet-law"; 208 reg = <0x0 0x1000>; 209 fsl,num-laws = <32>; 210 }; 211 212 ddr1: memory-controller@8000 { 213 compatible = "fsl,qoriq-memory-controller-v4.4", "fsl,qoriq-memory-controller"; 214 reg = <0x8000 0x1000>; 215 interrupts = <16 2 1 23>; 216 }; 217 218 cpc: l3-cache-controller@10000 { 219 compatible = "fsl,p3060-l3-cache-controller", "cache"; 220 reg = <0x10000 0x1000 221 0x11000 0x1000>; 222 interrupts = <16 2 1 27 223 16 2 1 26>; 224 }; 225 226 corenet-cf@18000 { 227 compatible = "fsl,corenet-cf"; 228 reg = <0x18000 0x1000>; 229 interrupts = <16 2 1 31>; 230 fsl,ccf-num-csdids = <32>; 231 fsl,ccf-num-snoopids = <32>; 232 }; 233 234 iommu@20000 { 235 compatible = "fsl,pamu-v1.0", "fsl,pamu"; 236 reg = <0x20000 0x5000>; 237 interrupts = < 238 24 2 0 0 239 16 2 1 30>; 240 }; 241 242/include/ "qoriq-rmu-0.dtsi" 243/include/ "qoriq-mpic.dtsi" 244 245 guts: global-utilities@e0000 { 246 compatible = "fsl,qoriq-device-config-1.0"; 247 reg = <0xe0000 0xe00>; 248 fsl,has-rstcr; 249 #sleep-cells = <1>; 250 fsl,liodn-bits = <12>; 251 }; 252 253 pins: global-utilities@e0e00 { 254 compatible = "fsl,qoriq-pin-control-1.0"; 255 reg = <0xe0e00 0x200>; 256 #sleep-cells = <2>; 257 }; 258 259 clockgen: global-utilities@e1000 { 260 compatible = "fsl,p3060-clockgen", "fsl,qoriq-clockgen-1.0"; 261 reg = <0xe1000 0x1000>; 262 clock-frequency = <0>; 263 }; 264 265 rcpm: global-utilities@e2000 { 266 compatible = "fsl,qoriq-rcpm-1.0"; 267 reg = <0xe2000 0x1000>; 268 #sleep-cells = <1>; 269 }; 270 271 sfp: sfp@e8000 { 272 compatible = "fsl,p3060-sfp", "fsl,qoriq-sfp-1.0"; 273 reg = <0xe8000 0x1000>; 274 }; 275 276 serdes: serdes@ea000 { 277 compatible = "fsl,p3060-serdes"; 278 reg = <0xea000 0x1000>; 279 }; 280 281/include/ "qoriq-dma-0.dtsi" 282/include/ "qoriq-dma-1.dtsi" 283/include/ "qoriq-espi-0.dtsi" 284 spi@110000 { 285 fsl,espi-num-chipselects = <4>; 286 }; 287 288/include/ "qoriq-i2c-0.dtsi" 289/include/ "qoriq-i2c-1.dtsi" 290/include/ "qoriq-duart-0.dtsi" 291/include/ "qoriq-duart-1.dtsi" 292/include/ "qoriq-gpio-0.dtsi" 293/include/ "qoriq-usb2-mph-0.dtsi" 294 usb@210000 { 295 compatible = "fsl-usb2-mph-v2.2", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; 296 }; 297/include/ "qoriq-usb2-dr-0.dtsi" 298 usb@211000 { 299 compatible = "fsl-usb2-dr-v2.2", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; 300 }; 301/include/ "qoriq-sec4.1-0.dtsi" 302}; 303