1/* 2 * This file contains miscellaneous low-level functions. 3 * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) 4 * 5 * Largely rewritten by Cort Dougan (cort@cs.nmt.edu) 6 * and Paul Mackerras. 7 * 8 * kexec bits: 9 * Copyright (C) 2002-2003 Eric Biederman <ebiederm@xmission.com> 10 * GameCube/ppc32 port Copyright (C) 2004 Albert Herranz 11 * PPC44x port. Copyright (C) 2011, IBM Corporation 12 * Author: Suzuki Poulose <suzuki@in.ibm.com> 13 * 14 * This program is free software; you can redistribute it and/or 15 * modify it under the terms of the GNU General Public License 16 * as published by the Free Software Foundation; either version 17 * 2 of the License, or (at your option) any later version. 18 * 19 */ 20 21#include <linux/sys.h> 22#include <asm/unistd.h> 23#include <asm/errno.h> 24#include <asm/reg.h> 25#include <asm/page.h> 26#include <asm/cache.h> 27#include <asm/cputable.h> 28#include <asm/mmu.h> 29#include <asm/ppc_asm.h> 30#include <asm/thread_info.h> 31#include <asm/asm-offsets.h> 32#include <asm/processor.h> 33#include <asm/kexec.h> 34#include <asm/bug.h> 35#include <asm/ptrace.h> 36 37 .text 38 39_GLOBAL(call_do_softirq) 40 mflr r0 41 stw r0,4(r1) 42 stwu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r3) 43 mr r1,r3 44 bl __do_softirq 45 lwz r1,0(r1) 46 lwz r0,4(r1) 47 mtlr r0 48 blr 49 50_GLOBAL(call_handle_irq) 51 mflr r0 52 stw r0,4(r1) 53 mtctr r6 54 stwu r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r5) 55 mr r1,r5 56 bctrl 57 lwz r1,0(r1) 58 lwz r0,4(r1) 59 mtlr r0 60 blr 61 62/* 63 * This returns the high 64 bits of the product of two 64-bit numbers. 64 */ 65_GLOBAL(mulhdu) 66 cmpwi r6,0 67 cmpwi cr1,r3,0 68 mr r10,r4 69 mulhwu r4,r4,r5 70 beq 1f 71 mulhwu r0,r10,r6 72 mullw r7,r10,r5 73 addc r7,r0,r7 74 addze r4,r4 751: beqlr cr1 /* all done if high part of A is 0 */ 76 mr r10,r3 77 mullw r9,r3,r5 78 mulhwu r3,r3,r5 79 beq 2f 80 mullw r0,r10,r6 81 mulhwu r8,r10,r6 82 addc r7,r0,r7 83 adde r4,r4,r8 84 addze r3,r3 852: addc r4,r4,r9 86 addze r3,r3 87 blr 88 89/* 90 * sub_reloc_offset(x) returns x - reloc_offset(). 91 */ 92_GLOBAL(sub_reloc_offset) 93 mflr r0 94 bl 1f 951: mflr r5 96 lis r4,1b@ha 97 addi r4,r4,1b@l 98 subf r5,r4,r5 99 subf r3,r5,r3 100 mtlr r0 101 blr 102 103/* 104 * reloc_got2 runs through the .got2 section adding an offset 105 * to each entry. 106 */ 107_GLOBAL(reloc_got2) 108 mflr r11 109 lis r7,__got2_start@ha 110 addi r7,r7,__got2_start@l 111 lis r8,__got2_end@ha 112 addi r8,r8,__got2_end@l 113 subf r8,r7,r8 114 srwi. r8,r8,2 115 beqlr 116 mtctr r8 117 bl 1f 1181: mflr r0 119 lis r4,1b@ha 120 addi r4,r4,1b@l 121 subf r0,r4,r0 122 add r7,r0,r7 1232: lwz r0,0(r7) 124 add r0,r0,r3 125 stw r0,0(r7) 126 addi r7,r7,4 127 bdnz 2b 128 mtlr r11 129 blr 130 131/* 132 * call_setup_cpu - call the setup_cpu function for this cpu 133 * r3 = data offset, r24 = cpu number 134 * 135 * Setup function is called with: 136 * r3 = data offset 137 * r4 = ptr to CPU spec (relocated) 138 */ 139_GLOBAL(call_setup_cpu) 140 addis r4,r3,cur_cpu_spec@ha 141 addi r4,r4,cur_cpu_spec@l 142 lwz r4,0(r4) 143 add r4,r4,r3 144 lwz r5,CPU_SPEC_SETUP(r4) 145 cmpwi 0,r5,0 146 add r5,r5,r3 147 beqlr 148 mtctr r5 149 bctr 150 151#if defined(CONFIG_CPU_FREQ_PMAC) && defined(CONFIG_6xx) 152 153/* This gets called by via-pmu.c to switch the PLL selection 154 * on 750fx CPU. This function should really be moved to some 155 * other place (as most of the cpufreq code in via-pmu 156 */ 157_GLOBAL(low_choose_750fx_pll) 158 /* Clear MSR:EE */ 159 mfmsr r7 160 rlwinm r0,r7,0,17,15 161 mtmsr r0 162 163 /* If switching to PLL1, disable HID0:BTIC */ 164 cmplwi cr0,r3,0 165 beq 1f 166 mfspr r5,SPRN_HID0 167 rlwinm r5,r5,0,27,25 168 sync 169 mtspr SPRN_HID0,r5 170 isync 171 sync 172 1731: 174 /* Calc new HID1 value */ 175 mfspr r4,SPRN_HID1 /* Build a HID1:PS bit from parameter */ 176 rlwinm r5,r3,16,15,15 /* Clear out HID1:PS from value read */ 177 rlwinm r4,r4,0,16,14 /* Could have I used rlwimi here ? */ 178 or r4,r4,r5 179 mtspr SPRN_HID1,r4 180 181 /* Store new HID1 image */ 182 rlwinm r6,r1,0,0,(31-THREAD_SHIFT) 183 lwz r6,TI_CPU(r6) 184 slwi r6,r6,2 185 addis r6,r6,nap_save_hid1@ha 186 stw r4,nap_save_hid1@l(r6) 187 188 /* If switching to PLL0, enable HID0:BTIC */ 189 cmplwi cr0,r3,0 190 bne 1f 191 mfspr r5,SPRN_HID0 192 ori r5,r5,HID0_BTIC 193 sync 194 mtspr SPRN_HID0,r5 195 isync 196 sync 197 1981: 199 /* Return */ 200 mtmsr r7 201 blr 202 203_GLOBAL(low_choose_7447a_dfs) 204 /* Clear MSR:EE */ 205 mfmsr r7 206 rlwinm r0,r7,0,17,15 207 mtmsr r0 208 209 /* Calc new HID1 value */ 210 mfspr r4,SPRN_HID1 211 insrwi r4,r3,1,9 /* insert parameter into bit 9 */ 212 sync 213 mtspr SPRN_HID1,r4 214 sync 215 isync 216 217 /* Return */ 218 mtmsr r7 219 blr 220 221#endif /* CONFIG_CPU_FREQ_PMAC && CONFIG_6xx */ 222 223/* 224 * complement mask on the msr then "or" some values on. 225 * _nmask_and_or_msr(nmask, value_to_or) 226 */ 227_GLOBAL(_nmask_and_or_msr) 228 mfmsr r0 /* Get current msr */ 229 andc r0,r0,r3 /* And off the bits set in r3 (first parm) */ 230 or r0,r0,r4 /* Or on the bits in r4 (second parm) */ 231 SYNC /* Some chip revs have problems here... */ 232 mtmsr r0 /* Update machine state */ 233 isync 234 blr /* Done */ 235 236#ifdef CONFIG_40x 237 238/* 239 * Do an IO access in real mode 240 */ 241_GLOBAL(real_readb) 242 mfmsr r7 243 ori r0,r7,MSR_DR 244 xori r0,r0,MSR_DR 245 sync 246 mtmsr r0 247 sync 248 isync 249 lbz r3,0(r3) 250 sync 251 mtmsr r7 252 sync 253 isync 254 blr 255 256 /* 257 * Do an IO access in real mode 258 */ 259_GLOBAL(real_writeb) 260 mfmsr r7 261 ori r0,r7,MSR_DR 262 xori r0,r0,MSR_DR 263 sync 264 mtmsr r0 265 sync 266 isync 267 stb r3,0(r4) 268 sync 269 mtmsr r7 270 sync 271 isync 272 blr 273 274#endif /* CONFIG_40x */ 275 276 277/* 278 * Flush instruction cache. 279 * This is a no-op on the 601. 280 */ 281_GLOBAL(flush_instruction_cache) 282#if defined(CONFIG_8xx) 283 isync 284 lis r5, IDC_INVALL@h 285 mtspr SPRN_IC_CST, r5 286#elif defined(CONFIG_4xx) 287#ifdef CONFIG_403GCX 288 li r3, 512 289 mtctr r3 290 lis r4, KERNELBASE@h 2911: iccci 0, r4 292 addi r4, r4, 16 293 bdnz 1b 294#else 295 lis r3, KERNELBASE@h 296 iccci 0,r3 297#endif 298#elif CONFIG_FSL_BOOKE 299BEGIN_FTR_SECTION 300 mfspr r3,SPRN_L1CSR0 301 ori r3,r3,L1CSR0_CFI|L1CSR0_CLFC 302 /* msync; isync recommended here */ 303 mtspr SPRN_L1CSR0,r3 304 isync 305 blr 306END_FTR_SECTION_IFSET(CPU_FTR_UNIFIED_ID_CACHE) 307 mfspr r3,SPRN_L1CSR1 308 ori r3,r3,L1CSR1_ICFI|L1CSR1_ICLFR 309 mtspr SPRN_L1CSR1,r3 310#else 311 mfspr r3,SPRN_PVR 312 rlwinm r3,r3,16,16,31 313 cmpwi 0,r3,1 314 beqlr /* for 601, do nothing */ 315 /* 603/604 processor - use invalidate-all bit in HID0 */ 316 mfspr r3,SPRN_HID0 317 ori r3,r3,HID0_ICFI 318 mtspr SPRN_HID0,r3 319#endif /* CONFIG_8xx/4xx */ 320 isync 321 blr 322 323/* 324 * Write any modified data cache blocks out to memory 325 * and invalidate the corresponding instruction cache blocks. 326 * This is a no-op on the 601. 327 * 328 * flush_icache_range(unsigned long start, unsigned long stop) 329 */ 330_KPROBE(__flush_icache_range) 331BEGIN_FTR_SECTION 332 blr /* for 601, do nothing */ 333END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) 334 li r5,L1_CACHE_BYTES-1 335 andc r3,r3,r5 336 subf r4,r3,r4 337 add r4,r4,r5 338 srwi. r4,r4,L1_CACHE_SHIFT 339 beqlr 340 mtctr r4 341 mr r6,r3 3421: dcbst 0,r3 343 addi r3,r3,L1_CACHE_BYTES 344 bdnz 1b 345 sync /* wait for dcbst's to get to ram */ 346#ifndef CONFIG_44x 347 mtctr r4 3482: icbi 0,r6 349 addi r6,r6,L1_CACHE_BYTES 350 bdnz 2b 351#else 352 /* Flash invalidate on 44x because we are passed kmapped addresses and 353 this doesn't work for userspace pages due to the virtually tagged 354 icache. Sigh. */ 355 iccci 0, r0 356#endif 357 sync /* additional sync needed on g4 */ 358 isync 359 blr 360/* 361 * Write any modified data cache blocks out to memory. 362 * Does not invalidate the corresponding cache lines (especially for 363 * any corresponding instruction cache). 364 * 365 * clean_dcache_range(unsigned long start, unsigned long stop) 366 */ 367_GLOBAL(clean_dcache_range) 368 li r5,L1_CACHE_BYTES-1 369 andc r3,r3,r5 370 subf r4,r3,r4 371 add r4,r4,r5 372 srwi. r4,r4,L1_CACHE_SHIFT 373 beqlr 374 mtctr r4 375 3761: dcbst 0,r3 377 addi r3,r3,L1_CACHE_BYTES 378 bdnz 1b 379 sync /* wait for dcbst's to get to ram */ 380 blr 381 382/* 383 * Write any modified data cache blocks out to memory and invalidate them. 384 * Does not invalidate the corresponding instruction cache blocks. 385 * 386 * flush_dcache_range(unsigned long start, unsigned long stop) 387 */ 388_GLOBAL(flush_dcache_range) 389 li r5,L1_CACHE_BYTES-1 390 andc r3,r3,r5 391 subf r4,r3,r4 392 add r4,r4,r5 393 srwi. r4,r4,L1_CACHE_SHIFT 394 beqlr 395 mtctr r4 396 3971: dcbf 0,r3 398 addi r3,r3,L1_CACHE_BYTES 399 bdnz 1b 400 sync /* wait for dcbst's to get to ram */ 401 blr 402 403/* 404 * Like above, but invalidate the D-cache. This is used by the 8xx 405 * to invalidate the cache so the PPC core doesn't get stale data 406 * from the CPM (no cache snooping here :-). 407 * 408 * invalidate_dcache_range(unsigned long start, unsigned long stop) 409 */ 410_GLOBAL(invalidate_dcache_range) 411 li r5,L1_CACHE_BYTES-1 412 andc r3,r3,r5 413 subf r4,r3,r4 414 add r4,r4,r5 415 srwi. r4,r4,L1_CACHE_SHIFT 416 beqlr 417 mtctr r4 418 4191: dcbi 0,r3 420 addi r3,r3,L1_CACHE_BYTES 421 bdnz 1b 422 sync /* wait for dcbi's to get to ram */ 423 blr 424 425/* 426 * Flush a particular page from the data cache to RAM. 427 * Note: this is necessary because the instruction cache does *not* 428 * snoop from the data cache. 429 * This is a no-op on the 601 which has a unified cache. 430 * 431 * void __flush_dcache_icache(void *page) 432 */ 433_GLOBAL(__flush_dcache_icache) 434BEGIN_FTR_SECTION 435 blr 436END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) 437 rlwinm r3,r3,0,0,31-PAGE_SHIFT /* Get page base address */ 438 li r4,PAGE_SIZE/L1_CACHE_BYTES /* Number of lines in a page */ 439 mtctr r4 440 mr r6,r3 4410: dcbst 0,r3 /* Write line to ram */ 442 addi r3,r3,L1_CACHE_BYTES 443 bdnz 0b 444 sync 445#ifdef CONFIG_44x 446 /* We don't flush the icache on 44x. Those have a virtual icache 447 * and we don't have access to the virtual address here (it's 448 * not the page vaddr but where it's mapped in user space). The 449 * flushing of the icache on these is handled elsewhere, when 450 * a change in the address space occurs, before returning to 451 * user space 452 */ 453BEGIN_MMU_FTR_SECTION 454 blr 455END_MMU_FTR_SECTION_IFSET(MMU_FTR_TYPE_44x) 456#endif /* CONFIG_44x */ 457 mtctr r4 4581: icbi 0,r6 459 addi r6,r6,L1_CACHE_BYTES 460 bdnz 1b 461 sync 462 isync 463 blr 464 465#ifndef CONFIG_BOOKE 466/* 467 * Flush a particular page from the data cache to RAM, identified 468 * by its physical address. We turn off the MMU so we can just use 469 * the physical address (this may be a highmem page without a kernel 470 * mapping). 471 * 472 * void __flush_dcache_icache_phys(unsigned long physaddr) 473 */ 474_GLOBAL(__flush_dcache_icache_phys) 475BEGIN_FTR_SECTION 476 blr /* for 601, do nothing */ 477END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE) 478 mfmsr r10 479 rlwinm r0,r10,0,28,26 /* clear DR */ 480 mtmsr r0 481 isync 482 rlwinm r3,r3,0,0,31-PAGE_SHIFT /* Get page base address */ 483 li r4,PAGE_SIZE/L1_CACHE_BYTES /* Number of lines in a page */ 484 mtctr r4 485 mr r6,r3 4860: dcbst 0,r3 /* Write line to ram */ 487 addi r3,r3,L1_CACHE_BYTES 488 bdnz 0b 489 sync 490 mtctr r4 4911: icbi 0,r6 492 addi r6,r6,L1_CACHE_BYTES 493 bdnz 1b 494 sync 495 mtmsr r10 /* restore DR */ 496 isync 497 blr 498#endif /* CONFIG_BOOKE */ 499 500/* 501 * Clear pages using the dcbz instruction, which doesn't cause any 502 * memory traffic (except to write out any cache lines which get 503 * displaced). This only works on cacheable memory. 504 * 505 * void clear_pages(void *page, int order) ; 506 */ 507_GLOBAL(clear_pages) 508 li r0,PAGE_SIZE/L1_CACHE_BYTES 509 slw r0,r0,r4 510 mtctr r0 5111: dcbz 0,r3 512 addi r3,r3,L1_CACHE_BYTES 513 bdnz 1b 514 blr 515 516/* 517 * Copy a whole page. We use the dcbz instruction on the destination 518 * to reduce memory traffic (it eliminates the unnecessary reads of 519 * the destination into cache). This requires that the destination 520 * is cacheable. 521 */ 522#define COPY_16_BYTES \ 523 lwz r6,4(r4); \ 524 lwz r7,8(r4); \ 525 lwz r8,12(r4); \ 526 lwzu r9,16(r4); \ 527 stw r6,4(r3); \ 528 stw r7,8(r3); \ 529 stw r8,12(r3); \ 530 stwu r9,16(r3) 531 532_GLOBAL(copy_page) 533 addi r3,r3,-4 534 addi r4,r4,-4 535 536 li r5,4 537 538#if MAX_COPY_PREFETCH > 1 539 li r0,MAX_COPY_PREFETCH 540 li r11,4 541 mtctr r0 54211: dcbt r11,r4 543 addi r11,r11,L1_CACHE_BYTES 544 bdnz 11b 545#else /* MAX_COPY_PREFETCH == 1 */ 546 dcbt r5,r4 547 li r11,L1_CACHE_BYTES+4 548#endif /* MAX_COPY_PREFETCH */ 549 li r0,PAGE_SIZE/L1_CACHE_BYTES - MAX_COPY_PREFETCH 550 crclr 4*cr0+eq 5512: 552 mtctr r0 5531: 554 dcbt r11,r4 555 dcbz r5,r3 556 COPY_16_BYTES 557#if L1_CACHE_BYTES >= 32 558 COPY_16_BYTES 559#if L1_CACHE_BYTES >= 64 560 COPY_16_BYTES 561 COPY_16_BYTES 562#if L1_CACHE_BYTES >= 128 563 COPY_16_BYTES 564 COPY_16_BYTES 565 COPY_16_BYTES 566 COPY_16_BYTES 567#endif 568#endif 569#endif 570 bdnz 1b 571 beqlr 572 crnot 4*cr0+eq,4*cr0+eq 573 li r0,MAX_COPY_PREFETCH 574 li r11,4 575 b 2b 576 577/* 578 * void atomic_clear_mask(atomic_t mask, atomic_t *addr) 579 * void atomic_set_mask(atomic_t mask, atomic_t *addr); 580 */ 581_GLOBAL(atomic_clear_mask) 58210: lwarx r5,0,r4 583 andc r5,r5,r3 584 PPC405_ERR77(0,r4) 585 stwcx. r5,0,r4 586 bne- 10b 587 blr 588_GLOBAL(atomic_set_mask) 58910: lwarx r5,0,r4 590 or r5,r5,r3 591 PPC405_ERR77(0,r4) 592 stwcx. r5,0,r4 593 bne- 10b 594 blr 595 596/* 597 * Extended precision shifts. 598 * 599 * Updated to be valid for shift counts from 0 to 63 inclusive. 600 * -- Gabriel 601 * 602 * R3/R4 has 64 bit value 603 * R5 has shift count 604 * result in R3/R4 605 * 606 * ashrdi3: arithmetic right shift (sign propagation) 607 * lshrdi3: logical right shift 608 * ashldi3: left shift 609 */ 610_GLOBAL(__ashrdi3) 611 subfic r6,r5,32 612 srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count 613 addi r7,r5,32 # could be xori, or addi with -32 614 slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count) 615 rlwinm r8,r7,0,32 # t3 = (count < 32) ? 32 : 0 616 sraw r7,r3,r7 # t2 = MSW >> (count-32) 617 or r4,r4,r6 # LSW |= t1 618 slw r7,r7,r8 # t2 = (count < 32) ? 0 : t2 619 sraw r3,r3,r5 # MSW = MSW >> count 620 or r4,r4,r7 # LSW |= t2 621 blr 622 623_GLOBAL(__ashldi3) 624 subfic r6,r5,32 625 slw r3,r3,r5 # MSW = count > 31 ? 0 : MSW << count 626 addi r7,r5,32 # could be xori, or addi with -32 627 srw r6,r4,r6 # t1 = count > 31 ? 0 : LSW >> (32-count) 628 slw r7,r4,r7 # t2 = count < 32 ? 0 : LSW << (count-32) 629 or r3,r3,r6 # MSW |= t1 630 slw r4,r4,r5 # LSW = LSW << count 631 or r3,r3,r7 # MSW |= t2 632 blr 633 634_GLOBAL(__lshrdi3) 635 subfic r6,r5,32 636 srw r4,r4,r5 # LSW = count > 31 ? 0 : LSW >> count 637 addi r7,r5,32 # could be xori, or addi with -32 638 slw r6,r3,r6 # t1 = count > 31 ? 0 : MSW << (32-count) 639 srw r7,r3,r7 # t2 = count < 32 ? 0 : MSW >> (count-32) 640 or r4,r4,r6 # LSW |= t1 641 srw r3,r3,r5 # MSW = MSW >> count 642 or r4,r4,r7 # LSW |= t2 643 blr 644 645/* 646 * 64-bit comparison: __ucmpdi2(u64 a, u64 b) 647 * Returns 0 if a < b, 1 if a == b, 2 if a > b. 648 */ 649_GLOBAL(__ucmpdi2) 650 cmplw r3,r5 651 li r3,1 652 bne 1f 653 cmplw r4,r6 654 beqlr 6551: li r3,0 656 bltlr 657 li r3,2 658 blr 659 660_GLOBAL(abs) 661 srawi r4,r3,31 662 xor r3,r3,r4 663 sub r3,r3,r4 664 blr 665 666/* 667 * Create a kernel thread 668 * kernel_thread(fn, arg, flags) 669 */ 670_GLOBAL(kernel_thread) 671 stwu r1,-16(r1) 672 stw r30,8(r1) 673 stw r31,12(r1) 674 mr r30,r3 /* function */ 675 mr r31,r4 /* argument */ 676 ori r3,r5,CLONE_VM /* flags */ 677 oris r3,r3,CLONE_UNTRACED>>16 678 li r4,0 /* new sp (unused) */ 679 li r0,__NR_clone 680 sc 681 bns+ 1f /* did system call indicate error? */ 682 neg r3,r3 /* if so, make return code negative */ 6831: cmpwi 0,r3,0 /* parent or child? */ 684 bne 2f /* return if parent */ 685 li r0,0 /* make top-level stack frame */ 686 stwu r0,-16(r1) 687 mtlr r30 /* fn addr in lr */ 688 mr r3,r31 /* load arg and call fn */ 689 PPC440EP_ERR42 690 blrl 691 li r0,__NR_exit /* exit if function returns */ 692 li r3,0 693 sc 6942: lwz r30,8(r1) 695 lwz r31,12(r1) 696 addi r1,r1,16 697 blr 698 699#ifdef CONFIG_SMP 700_GLOBAL(start_secondary_resume) 701 /* Reset stack */ 702 rlwinm r1,r1,0,0,(31-THREAD_SHIFT) /* current_thread_info() */ 703 addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD 704 li r3,0 705 stw r3,0(r1) /* Zero the stack frame pointer */ 706 bl start_secondary 707 b . 708#endif /* CONFIG_SMP */ 709 710/* 711 * This routine is just here to keep GCC happy - sigh... 712 */ 713_GLOBAL(__main) 714 blr 715 716#ifdef CONFIG_KEXEC 717 /* 718 * Must be relocatable PIC code callable as a C function. 719 */ 720 .globl relocate_new_kernel 721relocate_new_kernel: 722 /* r3 = page_list */ 723 /* r4 = reboot_code_buffer */ 724 /* r5 = start_address */ 725 726#ifdef CONFIG_FSL_BOOKE 727 728 mr r29, r3 729 mr r30, r4 730 mr r31, r5 731 732#define ENTRY_MAPPING_KEXEC_SETUP 733#include "fsl_booke_entry_mapping.S" 734#undef ENTRY_MAPPING_KEXEC_SETUP 735 736 mr r3, r29 737 mr r4, r30 738 mr r5, r31 739 740 li r0, 0 741#elif defined(CONFIG_44x) && !defined(CONFIG_PPC_47x) 742 743/* 744 * Code for setting up 1:1 mapping for PPC440x for KEXEC 745 * 746 * We cannot switch off the MMU on PPC44x. 747 * So we: 748 * 1) Invalidate all the mappings except the one we are running from. 749 * 2) Create a tmp mapping for our code in the other address space(TS) and 750 * jump to it. Invalidate the entry we started in. 751 * 3) Create a 1:1 mapping for 0-2GiB in chunks of 256M in original TS. 752 * 4) Jump to the 1:1 mapping in original TS. 753 * 5) Invalidate the tmp mapping. 754 * 755 * - Based on the kexec support code for FSL BookE 756 * - Doesn't support 47x yet. 757 * 758 */ 759 /* Save our parameters */ 760 mr r29, r3 761 mr r30, r4 762 mr r31, r5 763 764 /* Load our MSR_IS and TID to MMUCR for TLB search */ 765 mfspr r3,SPRN_PID 766 mfmsr r4 767 andi. r4,r4,MSR_IS@l 768 beq wmmucr 769 oris r3,r3,PPC44x_MMUCR_STS@h 770wmmucr: 771 mtspr SPRN_MMUCR,r3 772 sync 773 774 /* 775 * Invalidate all the TLB entries except the current entry 776 * where we are running from 777 */ 778 bl 0f /* Find our address */ 7790: mflr r5 /* Make it accessible */ 780 tlbsx r23,0,r5 /* Find entry we are in */ 781 li r4,0 /* Start at TLB entry 0 */ 782 li r3,0 /* Set PAGEID inval value */ 7831: cmpw r23,r4 /* Is this our entry? */ 784 beq skip /* If so, skip the inval */ 785 tlbwe r3,r4,PPC44x_TLB_PAGEID /* If not, inval the entry */ 786skip: 787 addi r4,r4,1 /* Increment */ 788 cmpwi r4,64 /* Are we done? */ 789 bne 1b /* If not, repeat */ 790 isync 791 792 /* Create a temp mapping and jump to it */ 793 andi. r6, r23, 1 /* Find the index to use */ 794 addi r24, r6, 1 /* r24 will contain 1 or 2 */ 795 796 mfmsr r9 /* get the MSR */ 797 rlwinm r5, r9, 27, 31, 31 /* Extract the MSR[IS] */ 798 xori r7, r5, 1 /* Use the other address space */ 799 800 /* Read the current mapping entries */ 801 tlbre r3, r23, PPC44x_TLB_PAGEID 802 tlbre r4, r23, PPC44x_TLB_XLAT 803 tlbre r5, r23, PPC44x_TLB_ATTRIB 804 805 /* Save our current XLAT entry */ 806 mr r25, r4 807 808 /* Extract the TLB PageSize */ 809 li r10, 1 /* r10 will hold PageSize */ 810 rlwinm r11, r3, 0, 24, 27 /* bits 24-27 */ 811 812 /* XXX: As of now we use 256M, 4K pages */ 813 cmpwi r11, PPC44x_TLB_256M 814 bne tlb_4k 815 rotlwi r10, r10, 28 /* r10 = 256M */ 816 b write_out 817tlb_4k: 818 cmpwi r11, PPC44x_TLB_4K 819 bne default 820 rotlwi r10, r10, 12 /* r10 = 4K */ 821 b write_out 822default: 823 rotlwi r10, r10, 10 /* r10 = 1K */ 824 825write_out: 826 /* 827 * Write out the tmp 1:1 mapping for this code in other address space 828 * Fixup EPN = RPN , TS=other address space 829 */ 830 insrwi r3, r7, 1, 23 /* Bit 23 is TS for PAGEID field */ 831 832 /* Write out the tmp mapping entries */ 833 tlbwe r3, r24, PPC44x_TLB_PAGEID 834 tlbwe r4, r24, PPC44x_TLB_XLAT 835 tlbwe r5, r24, PPC44x_TLB_ATTRIB 836 837 subi r11, r10, 1 /* PageOffset Mask = PageSize - 1 */ 838 not r10, r11 /* Mask for PageNum */ 839 840 /* Switch to other address space in MSR */ 841 insrwi r9, r7, 1, 26 /* Set MSR[IS] = r7 */ 842 843 bl 1f 8441: mflr r8 845 addi r8, r8, (2f-1b) /* Find the target offset */ 846 847 /* Jump to the tmp mapping */ 848 mtspr SPRN_SRR0, r8 849 mtspr SPRN_SRR1, r9 850 rfi 851 8522: 853 /* Invalidate the entry we were executing from */ 854 li r3, 0 855 tlbwe r3, r23, PPC44x_TLB_PAGEID 856 857 /* attribute fields. rwx for SUPERVISOR mode */ 858 li r5, 0 859 ori r5, r5, (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G) 860 861 /* Create 1:1 mapping in 256M pages */ 862 xori r7, r7, 1 /* Revert back to Original TS */ 863 864 li r8, 0 /* PageNumber */ 865 li r6, 3 /* TLB Index, start at 3 */ 866 867next_tlb: 868 rotlwi r3, r8, 28 /* Create EPN (bits 0-3) */ 869 mr r4, r3 /* RPN = EPN */ 870 ori r3, r3, (PPC44x_TLB_VALID | PPC44x_TLB_256M) /* SIZE = 256M, Valid */ 871 insrwi r3, r7, 1, 23 /* Set TS from r7 */ 872 873 tlbwe r3, r6, PPC44x_TLB_PAGEID /* PageID field : EPN, V, SIZE */ 874 tlbwe r4, r6, PPC44x_TLB_XLAT /* Address translation : RPN */ 875 tlbwe r5, r6, PPC44x_TLB_ATTRIB /* Attributes */ 876 877 addi r8, r8, 1 /* Increment PN */ 878 addi r6, r6, 1 /* Increment TLB Index */ 879 cmpwi r8, 8 /* Are we done ? */ 880 bne next_tlb 881 isync 882 883 /* Jump to the new mapping 1:1 */ 884 li r9,0 885 insrwi r9, r7, 1, 26 /* Set MSR[IS] = r7 */ 886 887 bl 1f 8881: mflr r8 889 and r8, r8, r11 /* Get our offset within page */ 890 addi r8, r8, (2f-1b) 891 892 and r5, r25, r10 /* Get our target PageNum */ 893 or r8, r8, r5 /* Target jump address */ 894 895 mtspr SPRN_SRR0, r8 896 mtspr SPRN_SRR1, r9 897 rfi 8982: 899 /* Invalidate the tmp entry we used */ 900 li r3, 0 901 tlbwe r3, r24, PPC44x_TLB_PAGEID 902 sync 903 904 /* Restore the parameters */ 905 mr r3, r29 906 mr r4, r30 907 mr r5, r31 908 909 li r0, 0 910#else 911 li r0, 0 912 913 /* 914 * Set Machine Status Register to a known status, 915 * switch the MMU off and jump to 1: in a single step. 916 */ 917 918 mr r8, r0 919 ori r8, r8, MSR_RI|MSR_ME 920 mtspr SPRN_SRR1, r8 921 addi r8, r4, 1f - relocate_new_kernel 922 mtspr SPRN_SRR0, r8 923 sync 924 rfi 925 9261: 927#endif 928 /* from this point address translation is turned off */ 929 /* and interrupts are disabled */ 930 931 /* set a new stack at the bottom of our page... */ 932 /* (not really needed now) */ 933 addi r1, r4, KEXEC_CONTROL_PAGE_SIZE - 8 /* for LR Save+Back Chain */ 934 stw r0, 0(r1) 935 936 /* Do the copies */ 937 li r6, 0 /* checksum */ 938 mr r0, r3 939 b 1f 940 9410: /* top, read another word for the indirection page */ 942 lwzu r0, 4(r3) 943 9441: 945 /* is it a destination page? (r8) */ 946 rlwinm. r7, r0, 0, 31, 31 /* IND_DESTINATION (1<<0) */ 947 beq 2f 948 949 rlwinm r8, r0, 0, 0, 19 /* clear kexec flags, page align */ 950 b 0b 951 9522: /* is it an indirection page? (r3) */ 953 rlwinm. r7, r0, 0, 30, 30 /* IND_INDIRECTION (1<<1) */ 954 beq 2f 955 956 rlwinm r3, r0, 0, 0, 19 /* clear kexec flags, page align */ 957 subi r3, r3, 4 958 b 0b 959 9602: /* are we done? */ 961 rlwinm. r7, r0, 0, 29, 29 /* IND_DONE (1<<2) */ 962 beq 2f 963 b 3f 964 9652: /* is it a source page? (r9) */ 966 rlwinm. r7, r0, 0, 28, 28 /* IND_SOURCE (1<<3) */ 967 beq 0b 968 969 rlwinm r9, r0, 0, 0, 19 /* clear kexec flags, page align */ 970 971 li r7, PAGE_SIZE / 4 972 mtctr r7 973 subi r9, r9, 4 974 subi r8, r8, 4 9759: 976 lwzu r0, 4(r9) /* do the copy */ 977 xor r6, r6, r0 978 stwu r0, 4(r8) 979 dcbst 0, r8 980 sync 981 icbi 0, r8 982 bdnz 9b 983 984 addi r9, r9, 4 985 addi r8, r8, 4 986 b 0b 987 9883: 989 990 /* To be certain of avoiding problems with self-modifying code 991 * execute a serializing instruction here. 992 */ 993 isync 994 sync 995 996 mfspr r3, SPRN_PIR /* current core we are running on */ 997 mr r4, r5 /* load physical address of chunk called */ 998 999 /* jump to the entry point, usually the setup routine */ 1000 mtlr r5 1001 blrl 1002 10031: b 1b 1004 1005relocate_new_kernel_end: 1006 1007 .globl relocate_new_kernel_size 1008relocate_new_kernel_size: 1009 .long relocate_new_kernel_end - relocate_new_kernel 1010#endif 1011