1 /***************************************************************************
2 * Copyright (C) 2010 by Bruno Prémont <bonbons@linux-vserver.org> *
3 * *
4 * Based on Logitech G13 driver (v0.4) *
5 * Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@cs.nmsu.edu> *
6 * *
7 * This program is free software: you can redistribute it and/or modify *
8 * it under the terms of the GNU General Public License as published by *
9 * the Free Software Foundation, version 2 of the License. *
10 * *
11 * This driver is distributed in the hope that it will be useful, but *
12 * WITHOUT ANY WARRANTY; without even the implied warranty of *
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU *
14 * General Public License for more details. *
15 * *
16 * You should have received a copy of the GNU General Public License *
17 * along with this software. If not see <http://www.gnu.org/licenses/>. *
18 ***************************************************************************/
19
20 #include <linux/hid.h>
21 #include <linux/hid-debug.h>
22 #include <linux/input.h>
23 #include "hid-ids.h"
24 #include "usbhid/usbhid.h"
25 #include <linux/usb.h>
26
27 #include <linux/fb.h>
28 #include <linux/vmalloc.h>
29 #include <linux/backlight.h>
30 #include <linux/lcd.h>
31
32 #include <linux/leds.h>
33
34 #include <linux/seq_file.h>
35 #include <linux/debugfs.h>
36
37 #include <linux/completion.h>
38 #include <linux/uaccess.h>
39 #include <linux/module.h>
40
41 #define PICOLCD_NAME "PicoLCD (graphic)"
42
43 /* Report numbers */
44 #define REPORT_ERROR_CODE 0x10 /* LCD: IN[16] */
45 #define ERR_SUCCESS 0x00
46 #define ERR_PARAMETER_MISSING 0x01
47 #define ERR_DATA_MISSING 0x02
48 #define ERR_BLOCK_READ_ONLY 0x03
49 #define ERR_BLOCK_NOT_ERASABLE 0x04
50 #define ERR_BLOCK_TOO_BIG 0x05
51 #define ERR_SECTION_OVERFLOW 0x06
52 #define ERR_INVALID_CMD_LEN 0x07
53 #define ERR_INVALID_DATA_LEN 0x08
54 #define REPORT_KEY_STATE 0x11 /* LCD: IN[2] */
55 #define REPORT_IR_DATA 0x21 /* LCD: IN[63] */
56 #define REPORT_EE_DATA 0x32 /* LCD: IN[63] */
57 #define REPORT_MEMORY 0x41 /* LCD: IN[63] */
58 #define REPORT_LED_STATE 0x81 /* LCD: OUT[1] */
59 #define REPORT_BRIGHTNESS 0x91 /* LCD: OUT[1] */
60 #define REPORT_CONTRAST 0x92 /* LCD: OUT[1] */
61 #define REPORT_RESET 0x93 /* LCD: OUT[2] */
62 #define REPORT_LCD_CMD 0x94 /* LCD: OUT[63] */
63 #define REPORT_LCD_DATA 0x95 /* LCD: OUT[63] */
64 #define REPORT_LCD_CMD_DATA 0x96 /* LCD: OUT[63] */
65 #define REPORT_EE_READ 0xa3 /* LCD: OUT[63] */
66 #define REPORT_EE_WRITE 0xa4 /* LCD: OUT[63] */
67 #define REPORT_ERASE_MEMORY 0xb2 /* LCD: OUT[2] */
68 #define REPORT_READ_MEMORY 0xb3 /* LCD: OUT[3] */
69 #define REPORT_WRITE_MEMORY 0xb4 /* LCD: OUT[63] */
70 #define REPORT_SPLASH_RESTART 0xc1 /* LCD: OUT[1] */
71 #define REPORT_EXIT_KEYBOARD 0xef /* LCD: OUT[2] */
72 #define REPORT_VERSION 0xf1 /* LCD: IN[2],OUT[1] Bootloader: IN[2],OUT[1] */
73 #define REPORT_BL_ERASE_MEMORY 0xf2 /* Bootloader: IN[36],OUT[4] */
74 #define REPORT_BL_READ_MEMORY 0xf3 /* Bootloader: IN[36],OUT[4] */
75 #define REPORT_BL_WRITE_MEMORY 0xf4 /* Bootloader: IN[36],OUT[36] */
76 #define REPORT_DEVID 0xf5 /* LCD: IN[5], OUT[1] Bootloader: IN[5],OUT[1] */
77 #define REPORT_SPLASH_SIZE 0xf6 /* LCD: IN[4], OUT[1] */
78 #define REPORT_HOOK_VERSION 0xf7 /* LCD: IN[2], OUT[1] */
79 #define REPORT_EXIT_FLASHER 0xff /* Bootloader: OUT[2] */
80
81 #ifdef CONFIG_HID_PICOLCD_FB
82 /* Framebuffer
83 *
84 * The PicoLCD use a Topway LCD module of 256x64 pixel
85 * This display area is tiled over 4 controllers with 8 tiles
86 * each. Each tile has 8x64 pixel, each data byte representing
87 * a 1-bit wide vertical line of the tile.
88 *
89 * The display can be updated at a tile granularity.
90 *
91 * Chip 1 Chip 2 Chip 3 Chip 4
92 * +----------------+----------------+----------------+----------------+
93 * | Tile 1 | Tile 1 | Tile 1 | Tile 1 |
94 * +----------------+----------------+----------------+----------------+
95 * | Tile 2 | Tile 2 | Tile 2 | Tile 2 |
96 * +----------------+----------------+----------------+----------------+
97 * ...
98 * +----------------+----------------+----------------+----------------+
99 * | Tile 8 | Tile 8 | Tile 8 | Tile 8 |
100 * +----------------+----------------+----------------+----------------+
101 */
102 #define PICOLCDFB_NAME "picolcdfb"
103 #define PICOLCDFB_WIDTH (256)
104 #define PICOLCDFB_HEIGHT (64)
105 #define PICOLCDFB_SIZE (PICOLCDFB_WIDTH * PICOLCDFB_HEIGHT / 8)
106
107 #define PICOLCDFB_UPDATE_RATE_LIMIT 10
108 #define PICOLCDFB_UPDATE_RATE_DEFAULT 2
109
110 /* Framebuffer visual structures */
111 static const struct fb_fix_screeninfo picolcdfb_fix = {
112 .id = PICOLCDFB_NAME,
113 .type = FB_TYPE_PACKED_PIXELS,
114 .visual = FB_VISUAL_MONO01,
115 .xpanstep = 0,
116 .ypanstep = 0,
117 .ywrapstep = 0,
118 .line_length = PICOLCDFB_WIDTH / 8,
119 .accel = FB_ACCEL_NONE,
120 };
121
122 static const struct fb_var_screeninfo picolcdfb_var = {
123 .xres = PICOLCDFB_WIDTH,
124 .yres = PICOLCDFB_HEIGHT,
125 .xres_virtual = PICOLCDFB_WIDTH,
126 .yres_virtual = PICOLCDFB_HEIGHT,
127 .width = 103,
128 .height = 26,
129 .bits_per_pixel = 1,
130 .grayscale = 1,
131 .red = {
132 .offset = 0,
133 .length = 1,
134 .msb_right = 0,
135 },
136 .green = {
137 .offset = 0,
138 .length = 1,
139 .msb_right = 0,
140 },
141 .blue = {
142 .offset = 0,
143 .length = 1,
144 .msb_right = 0,
145 },
146 .transp = {
147 .offset = 0,
148 .length = 0,
149 .msb_right = 0,
150 },
151 };
152 #endif /* CONFIG_HID_PICOLCD_FB */
153
154 /* Input device
155 *
156 * The PicoLCD has an IR receiver header, a built-in keypad with 5 keys
157 * and header for 4x4 key matrix. The built-in keys are part of the matrix.
158 */
159 static const unsigned short def_keymap[] = {
160 KEY_RESERVED, /* none */
161 KEY_BACK, /* col 4 + row 1 */
162 KEY_HOMEPAGE, /* col 3 + row 1 */
163 KEY_RESERVED, /* col 2 + row 1 */
164 KEY_RESERVED, /* col 1 + row 1 */
165 KEY_SCROLLUP, /* col 4 + row 2 */
166 KEY_OK, /* col 3 + row 2 */
167 KEY_SCROLLDOWN, /* col 2 + row 2 */
168 KEY_RESERVED, /* col 1 + row 2 */
169 KEY_RESERVED, /* col 4 + row 3 */
170 KEY_RESERVED, /* col 3 + row 3 */
171 KEY_RESERVED, /* col 2 + row 3 */
172 KEY_RESERVED, /* col 1 + row 3 */
173 KEY_RESERVED, /* col 4 + row 4 */
174 KEY_RESERVED, /* col 3 + row 4 */
175 KEY_RESERVED, /* col 2 + row 4 */
176 KEY_RESERVED, /* col 1 + row 4 */
177 };
178 #define PICOLCD_KEYS ARRAY_SIZE(def_keymap)
179
180 /* Description of in-progress IO operation, used for operations
181 * that trigger response from device */
182 struct picolcd_pending {
183 struct hid_report *out_report;
184 struct hid_report *in_report;
185 struct completion ready;
186 int raw_size;
187 u8 raw_data[64];
188 };
189
190 /* Per device data structure */
191 struct picolcd_data {
192 struct hid_device *hdev;
193 #ifdef CONFIG_DEBUG_FS
194 struct dentry *debug_reset;
195 struct dentry *debug_eeprom;
196 struct dentry *debug_flash;
197 struct mutex mutex_flash;
198 int addr_sz;
199 #endif
200 u8 version[2];
201 unsigned short opmode_delay;
202 /* input stuff */
203 u8 pressed_keys[2];
204 struct input_dev *input_keys;
205 struct input_dev *input_cir;
206 unsigned short keycode[PICOLCD_KEYS];
207
208 #ifdef CONFIG_HID_PICOLCD_FB
209 /* Framebuffer stuff */
210 u8 fb_update_rate;
211 u8 fb_bpp;
212 u8 fb_force;
213 u8 *fb_vbitmap; /* local copy of what was sent to PicoLCD */
214 u8 *fb_bitmap; /* framebuffer */
215 struct fb_info *fb_info;
216 struct fb_deferred_io fb_defio;
217 #endif /* CONFIG_HID_PICOLCD_FB */
218 #ifdef CONFIG_HID_PICOLCD_LCD
219 struct lcd_device *lcd;
220 u8 lcd_contrast;
221 #endif /* CONFIG_HID_PICOLCD_LCD */
222 #ifdef CONFIG_HID_PICOLCD_BACKLIGHT
223 struct backlight_device *backlight;
224 u8 lcd_brightness;
225 u8 lcd_power;
226 #endif /* CONFIG_HID_PICOLCD_BACKLIGHT */
227 #ifdef CONFIG_HID_PICOLCD_LEDS
228 /* LED stuff */
229 u8 led_state;
230 struct led_classdev *led[8];
231 #endif /* CONFIG_HID_PICOLCD_LEDS */
232
233 /* Housekeeping stuff */
234 spinlock_t lock;
235 struct mutex mutex;
236 struct picolcd_pending *pending;
237 int status;
238 #define PICOLCD_BOOTLOADER 1
239 #define PICOLCD_FAILED 2
240 #define PICOLCD_READY_FB 4
241 };
242
243
244 /* Find a given report */
245 #define picolcd_in_report(id, dev) picolcd_report(id, dev, HID_INPUT_REPORT)
246 #define picolcd_out_report(id, dev) picolcd_report(id, dev, HID_OUTPUT_REPORT)
247
picolcd_report(int id,struct hid_device * hdev,int dir)248 static struct hid_report *picolcd_report(int id, struct hid_device *hdev, int dir)
249 {
250 struct list_head *feature_report_list = &hdev->report_enum[dir].report_list;
251 struct hid_report *report = NULL;
252
253 list_for_each_entry(report, feature_report_list, list) {
254 if (report->id == id)
255 return report;
256 }
257 hid_warn(hdev, "No report with id 0x%x found\n", id);
258 return NULL;
259 }
260
261 #ifdef CONFIG_DEBUG_FS
262 static void picolcd_debug_out_report(struct picolcd_data *data,
263 struct hid_device *hdev, struct hid_report *report);
264 #define usbhid_submit_report(a, b, c) \
265 do { \
266 picolcd_debug_out_report(hid_get_drvdata(a), a, b); \
267 usbhid_submit_report(a, b, c); \
268 } while (0)
269 #endif
270
271 /* Submit a report and wait for a reply from device - if device fades away
272 * or does not respond in time, return NULL */
picolcd_send_and_wait(struct hid_device * hdev,int report_id,const u8 * raw_data,int size)273 static struct picolcd_pending *picolcd_send_and_wait(struct hid_device *hdev,
274 int report_id, const u8 *raw_data, int size)
275 {
276 struct picolcd_data *data = hid_get_drvdata(hdev);
277 struct picolcd_pending *work;
278 struct hid_report *report = picolcd_out_report(report_id, hdev);
279 unsigned long flags;
280 int i, j, k;
281
282 if (!report || !data)
283 return NULL;
284 if (data->status & PICOLCD_FAILED)
285 return NULL;
286 work = kzalloc(sizeof(*work), GFP_KERNEL);
287 if (!work)
288 return NULL;
289
290 init_completion(&work->ready);
291 work->out_report = report;
292 work->in_report = NULL;
293 work->raw_size = 0;
294
295 mutex_lock(&data->mutex);
296 spin_lock_irqsave(&data->lock, flags);
297 for (i = k = 0; i < report->maxfield; i++)
298 for (j = 0; j < report->field[i]->report_count; j++) {
299 hid_set_field(report->field[i], j, k < size ? raw_data[k] : 0);
300 k++;
301 }
302 data->pending = work;
303 usbhid_submit_report(data->hdev, report, USB_DIR_OUT);
304 spin_unlock_irqrestore(&data->lock, flags);
305 wait_for_completion_interruptible_timeout(&work->ready, HZ*2);
306 spin_lock_irqsave(&data->lock, flags);
307 data->pending = NULL;
308 spin_unlock_irqrestore(&data->lock, flags);
309 mutex_unlock(&data->mutex);
310 return work;
311 }
312
313 #ifdef CONFIG_HID_PICOLCD_FB
314 /* Send a given tile to PicoLCD */
picolcd_fb_send_tile(struct hid_device * hdev,int chip,int tile)315 static int picolcd_fb_send_tile(struct hid_device *hdev, int chip, int tile)
316 {
317 struct picolcd_data *data = hid_get_drvdata(hdev);
318 struct hid_report *report1 = picolcd_out_report(REPORT_LCD_CMD_DATA, hdev);
319 struct hid_report *report2 = picolcd_out_report(REPORT_LCD_DATA, hdev);
320 unsigned long flags;
321 u8 *tdata;
322 int i;
323
324 if (!report1 || report1->maxfield != 1 || !report2 || report2->maxfield != 1)
325 return -ENODEV;
326
327 spin_lock_irqsave(&data->lock, flags);
328 hid_set_field(report1->field[0], 0, chip << 2);
329 hid_set_field(report1->field[0], 1, 0x02);
330 hid_set_field(report1->field[0], 2, 0x00);
331 hid_set_field(report1->field[0], 3, 0x00);
332 hid_set_field(report1->field[0], 4, 0xb8 | tile);
333 hid_set_field(report1->field[0], 5, 0x00);
334 hid_set_field(report1->field[0], 6, 0x00);
335 hid_set_field(report1->field[0], 7, 0x40);
336 hid_set_field(report1->field[0], 8, 0x00);
337 hid_set_field(report1->field[0], 9, 0x00);
338 hid_set_field(report1->field[0], 10, 32);
339
340 hid_set_field(report2->field[0], 0, (chip << 2) | 0x01);
341 hid_set_field(report2->field[0], 1, 0x00);
342 hid_set_field(report2->field[0], 2, 0x00);
343 hid_set_field(report2->field[0], 3, 32);
344
345 tdata = data->fb_vbitmap + (tile * 4 + chip) * 64;
346 for (i = 0; i < 64; i++)
347 if (i < 32)
348 hid_set_field(report1->field[0], 11 + i, tdata[i]);
349 else
350 hid_set_field(report2->field[0], 4 + i - 32, tdata[i]);
351
352 usbhid_submit_report(data->hdev, report1, USB_DIR_OUT);
353 usbhid_submit_report(data->hdev, report2, USB_DIR_OUT);
354 spin_unlock_irqrestore(&data->lock, flags);
355 return 0;
356 }
357
358 /* Translate a single tile*/
picolcd_fb_update_tile(u8 * vbitmap,const u8 * bitmap,int bpp,int chip,int tile)359 static int picolcd_fb_update_tile(u8 *vbitmap, const u8 *bitmap, int bpp,
360 int chip, int tile)
361 {
362 int i, b, changed = 0;
363 u8 tdata[64];
364 u8 *vdata = vbitmap + (tile * 4 + chip) * 64;
365
366 if (bpp == 1) {
367 for (b = 7; b >= 0; b--) {
368 const u8 *bdata = bitmap + tile * 256 + chip * 8 + b * 32;
369 for (i = 0; i < 64; i++) {
370 tdata[i] <<= 1;
371 tdata[i] |= (bdata[i/8] >> (i % 8)) & 0x01;
372 }
373 }
374 } else if (bpp == 8) {
375 for (b = 7; b >= 0; b--) {
376 const u8 *bdata = bitmap + (tile * 256 + chip * 8 + b * 32) * 8;
377 for (i = 0; i < 64; i++) {
378 tdata[i] <<= 1;
379 tdata[i] |= (bdata[i] & 0x80) ? 0x01 : 0x00;
380 }
381 }
382 } else {
383 /* Oops, we should never get here! */
384 WARN_ON(1);
385 return 0;
386 }
387
388 for (i = 0; i < 64; i++)
389 if (tdata[i] != vdata[i]) {
390 changed = 1;
391 vdata[i] = tdata[i];
392 }
393 return changed;
394 }
395
396 /* Reconfigure LCD display */
picolcd_fb_reset(struct picolcd_data * data,int clear)397 static int picolcd_fb_reset(struct picolcd_data *data, int clear)
398 {
399 struct hid_report *report = picolcd_out_report(REPORT_LCD_CMD, data->hdev);
400 int i, j;
401 unsigned long flags;
402 static const u8 mapcmd[8] = { 0x00, 0x02, 0x00, 0x64, 0x3f, 0x00, 0x64, 0xc0 };
403
404 if (!report || report->maxfield != 1)
405 return -ENODEV;
406
407 spin_lock_irqsave(&data->lock, flags);
408 for (i = 0; i < 4; i++) {
409 for (j = 0; j < report->field[0]->maxusage; j++)
410 if (j == 0)
411 hid_set_field(report->field[0], j, i << 2);
412 else if (j < sizeof(mapcmd))
413 hid_set_field(report->field[0], j, mapcmd[j]);
414 else
415 hid_set_field(report->field[0], j, 0);
416 usbhid_submit_report(data->hdev, report, USB_DIR_OUT);
417 }
418
419 data->status |= PICOLCD_READY_FB;
420 spin_unlock_irqrestore(&data->lock, flags);
421
422 if (data->fb_bitmap) {
423 if (clear) {
424 memset(data->fb_vbitmap, 0, PICOLCDFB_SIZE);
425 memset(data->fb_bitmap, 0, PICOLCDFB_SIZE*data->fb_bpp);
426 }
427 data->fb_force = 1;
428 }
429
430 /* schedule first output of framebuffer */
431 if (data->fb_info)
432 schedule_delayed_work(&data->fb_info->deferred_work, 0);
433
434 return 0;
435 }
436
437 /* Update fb_vbitmap from the screen_base and send changed tiles to device */
picolcd_fb_update(struct picolcd_data * data)438 static void picolcd_fb_update(struct picolcd_data *data)
439 {
440 int chip, tile, n;
441 unsigned long flags;
442
443 if (!data)
444 return;
445
446 spin_lock_irqsave(&data->lock, flags);
447 if (!(data->status & PICOLCD_READY_FB)) {
448 spin_unlock_irqrestore(&data->lock, flags);
449 picolcd_fb_reset(data, 0);
450 } else {
451 spin_unlock_irqrestore(&data->lock, flags);
452 }
453
454 /*
455 * Translate the framebuffer into the format needed by the PicoLCD.
456 * See display layout above.
457 * Do this one tile after the other and push those tiles that changed.
458 *
459 * Wait for our IO to complete as otherwise we might flood the queue!
460 */
461 n = 0;
462 for (chip = 0; chip < 4; chip++)
463 for (tile = 0; tile < 8; tile++)
464 if (picolcd_fb_update_tile(data->fb_vbitmap,
465 data->fb_bitmap, data->fb_bpp, chip, tile) ||
466 data->fb_force) {
467 n += 2;
468 if (!data->fb_info->par)
469 return; /* device lost! */
470 if (n >= HID_OUTPUT_FIFO_SIZE / 2) {
471 usbhid_wait_io(data->hdev);
472 n = 0;
473 }
474 picolcd_fb_send_tile(data->hdev, chip, tile);
475 }
476 data->fb_force = false;
477 if (n)
478 usbhid_wait_io(data->hdev);
479 }
480
481 /* Stub to call the system default and update the image on the picoLCD */
picolcd_fb_fillrect(struct fb_info * info,const struct fb_fillrect * rect)482 static void picolcd_fb_fillrect(struct fb_info *info,
483 const struct fb_fillrect *rect)
484 {
485 if (!info->par)
486 return;
487 sys_fillrect(info, rect);
488
489 schedule_delayed_work(&info->deferred_work, 0);
490 }
491
492 /* Stub to call the system default and update the image on the picoLCD */
picolcd_fb_copyarea(struct fb_info * info,const struct fb_copyarea * area)493 static void picolcd_fb_copyarea(struct fb_info *info,
494 const struct fb_copyarea *area)
495 {
496 if (!info->par)
497 return;
498 sys_copyarea(info, area);
499
500 schedule_delayed_work(&info->deferred_work, 0);
501 }
502
503 /* Stub to call the system default and update the image on the picoLCD */
picolcd_fb_imageblit(struct fb_info * info,const struct fb_image * image)504 static void picolcd_fb_imageblit(struct fb_info *info, const struct fb_image *image)
505 {
506 if (!info->par)
507 return;
508 sys_imageblit(info, image);
509
510 schedule_delayed_work(&info->deferred_work, 0);
511 }
512
513 /*
514 * this is the slow path from userspace. they can seek and write to
515 * the fb. it's inefficient to do anything less than a full screen draw
516 */
picolcd_fb_write(struct fb_info * info,const char __user * buf,size_t count,loff_t * ppos)517 static ssize_t picolcd_fb_write(struct fb_info *info, const char __user *buf,
518 size_t count, loff_t *ppos)
519 {
520 ssize_t ret;
521 if (!info->par)
522 return -ENODEV;
523 ret = fb_sys_write(info, buf, count, ppos);
524 if (ret >= 0)
525 schedule_delayed_work(&info->deferred_work, 0);
526 return ret;
527 }
528
picolcd_fb_blank(int blank,struct fb_info * info)529 static int picolcd_fb_blank(int blank, struct fb_info *info)
530 {
531 if (!info->par)
532 return -ENODEV;
533 /* We let fb notification do this for us via lcd/backlight device */
534 return 0;
535 }
536
picolcd_fb_destroy(struct fb_info * info)537 static void picolcd_fb_destroy(struct fb_info *info)
538 {
539 struct picolcd_data *data = info->par;
540 u32 *ref_cnt = info->pseudo_palette;
541 int may_release;
542
543 info->par = NULL;
544 if (data)
545 data->fb_info = NULL;
546 fb_deferred_io_cleanup(info);
547
548 ref_cnt--;
549 mutex_lock(&info->lock);
550 (*ref_cnt)--;
551 may_release = !*ref_cnt;
552 mutex_unlock(&info->lock);
553 if (may_release) {
554 vfree((u8 *)info->fix.smem_start);
555 framebuffer_release(info);
556 }
557 }
558
picolcd_fb_check_var(struct fb_var_screeninfo * var,struct fb_info * info)559 static int picolcd_fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
560 {
561 __u32 bpp = var->bits_per_pixel;
562 __u32 activate = var->activate;
563
564 /* only allow 1/8 bit depth (8-bit is grayscale) */
565 *var = picolcdfb_var;
566 var->activate = activate;
567 if (bpp >= 8) {
568 var->bits_per_pixel = 8;
569 var->red.length = 8;
570 var->green.length = 8;
571 var->blue.length = 8;
572 } else {
573 var->bits_per_pixel = 1;
574 var->red.length = 1;
575 var->green.length = 1;
576 var->blue.length = 1;
577 }
578 return 0;
579 }
580
picolcd_set_par(struct fb_info * info)581 static int picolcd_set_par(struct fb_info *info)
582 {
583 struct picolcd_data *data = info->par;
584 u8 *tmp_fb, *o_fb;
585 if (!data)
586 return -ENODEV;
587 if (info->var.bits_per_pixel == data->fb_bpp)
588 return 0;
589 /* switch between 1/8 bit depths */
590 if (info->var.bits_per_pixel != 1 && info->var.bits_per_pixel != 8)
591 return -EINVAL;
592
593 o_fb = data->fb_bitmap;
594 tmp_fb = kmalloc(PICOLCDFB_SIZE*info->var.bits_per_pixel, GFP_KERNEL);
595 if (!tmp_fb)
596 return -ENOMEM;
597
598 /* translate FB content to new bits-per-pixel */
599 if (info->var.bits_per_pixel == 1) {
600 int i, b;
601 for (i = 0; i < PICOLCDFB_SIZE; i++) {
602 u8 p = 0;
603 for (b = 0; b < 8; b++) {
604 p <<= 1;
605 p |= o_fb[i*8+b] ? 0x01 : 0x00;
606 }
607 tmp_fb[i] = p;
608 }
609 memcpy(o_fb, tmp_fb, PICOLCDFB_SIZE);
610 info->fix.visual = FB_VISUAL_MONO01;
611 info->fix.line_length = PICOLCDFB_WIDTH / 8;
612 } else {
613 int i;
614 memcpy(tmp_fb, o_fb, PICOLCDFB_SIZE);
615 for (i = 0; i < PICOLCDFB_SIZE * 8; i++)
616 o_fb[i] = tmp_fb[i/8] & (0x01 << (7 - i % 8)) ? 0xff : 0x00;
617 info->fix.visual = FB_VISUAL_DIRECTCOLOR;
618 info->fix.line_length = PICOLCDFB_WIDTH;
619 }
620
621 kfree(tmp_fb);
622 data->fb_bpp = info->var.bits_per_pixel;
623 return 0;
624 }
625
626 /* Do refcounting on our FB and cleanup per worker if FB is
627 * closed after unplug of our device
628 * (fb_release holds info->lock and still touches info after
629 * we return so we can't release it immediately.
630 */
631 struct picolcd_fb_cleanup_item {
632 struct fb_info *info;
633 struct picolcd_fb_cleanup_item *next;
634 };
635 static struct picolcd_fb_cleanup_item *fb_pending;
636 static DEFINE_SPINLOCK(fb_pending_lock);
637
picolcd_fb_do_cleanup(struct work_struct * data)638 static void picolcd_fb_do_cleanup(struct work_struct *data)
639 {
640 struct picolcd_fb_cleanup_item *item;
641 unsigned long flags;
642
643 do {
644 spin_lock_irqsave(&fb_pending_lock, flags);
645 item = fb_pending;
646 fb_pending = item ? item->next : NULL;
647 spin_unlock_irqrestore(&fb_pending_lock, flags);
648
649 if (item) {
650 u8 *fb = (u8 *)item->info->fix.smem_start;
651 /* make sure we do not race against fb core when
652 * releasing */
653 mutex_lock(&item->info->lock);
654 mutex_unlock(&item->info->lock);
655 framebuffer_release(item->info);
656 vfree(fb);
657 }
658 } while (item);
659 }
660
661 static DECLARE_WORK(picolcd_fb_cleanup, picolcd_fb_do_cleanup);
662
picolcd_fb_open(struct fb_info * info,int u)663 static int picolcd_fb_open(struct fb_info *info, int u)
664 {
665 u32 *ref_cnt = info->pseudo_palette;
666 ref_cnt--;
667
668 (*ref_cnt)++;
669 return 0;
670 }
671
picolcd_fb_release(struct fb_info * info,int u)672 static int picolcd_fb_release(struct fb_info *info, int u)
673 {
674 u32 *ref_cnt = info->pseudo_palette;
675 ref_cnt--;
676
677 (*ref_cnt)++;
678 if (!*ref_cnt) {
679 unsigned long flags;
680 struct picolcd_fb_cleanup_item *item = (struct picolcd_fb_cleanup_item *)ref_cnt;
681 item--;
682 spin_lock_irqsave(&fb_pending_lock, flags);
683 item->next = fb_pending;
684 fb_pending = item;
685 spin_unlock_irqrestore(&fb_pending_lock, flags);
686 schedule_work(&picolcd_fb_cleanup);
687 }
688 return 0;
689 }
690
691 /* Note this can't be const because of struct fb_info definition */
692 static struct fb_ops picolcdfb_ops = {
693 .owner = THIS_MODULE,
694 .fb_destroy = picolcd_fb_destroy,
695 .fb_open = picolcd_fb_open,
696 .fb_release = picolcd_fb_release,
697 .fb_read = fb_sys_read,
698 .fb_write = picolcd_fb_write,
699 .fb_blank = picolcd_fb_blank,
700 .fb_fillrect = picolcd_fb_fillrect,
701 .fb_copyarea = picolcd_fb_copyarea,
702 .fb_imageblit = picolcd_fb_imageblit,
703 .fb_check_var = picolcd_fb_check_var,
704 .fb_set_par = picolcd_set_par,
705 };
706
707
708 /* Callback from deferred IO workqueue */
picolcd_fb_deferred_io(struct fb_info * info,struct list_head * pagelist)709 static void picolcd_fb_deferred_io(struct fb_info *info, struct list_head *pagelist)
710 {
711 picolcd_fb_update(info->par);
712 }
713
714 static const struct fb_deferred_io picolcd_fb_defio = {
715 .delay = HZ / PICOLCDFB_UPDATE_RATE_DEFAULT,
716 .deferred_io = picolcd_fb_deferred_io,
717 };
718
719
720 /*
721 * The "fb_update_rate" sysfs attribute
722 */
picolcd_fb_update_rate_show(struct device * dev,struct device_attribute * attr,char * buf)723 static ssize_t picolcd_fb_update_rate_show(struct device *dev,
724 struct device_attribute *attr, char *buf)
725 {
726 struct picolcd_data *data = dev_get_drvdata(dev);
727 unsigned i, fb_update_rate = data->fb_update_rate;
728 size_t ret = 0;
729
730 for (i = 1; i <= PICOLCDFB_UPDATE_RATE_LIMIT; i++)
731 if (ret >= PAGE_SIZE)
732 break;
733 else if (i == fb_update_rate)
734 ret += snprintf(buf+ret, PAGE_SIZE-ret, "[%u] ", i);
735 else
736 ret += snprintf(buf+ret, PAGE_SIZE-ret, "%u ", i);
737 if (ret > 0)
738 buf[min(ret, (size_t)PAGE_SIZE)-1] = '\n';
739 return ret;
740 }
741
picolcd_fb_update_rate_store(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)742 static ssize_t picolcd_fb_update_rate_store(struct device *dev,
743 struct device_attribute *attr, const char *buf, size_t count)
744 {
745 struct picolcd_data *data = dev_get_drvdata(dev);
746 int i;
747 unsigned u;
748
749 if (count < 1 || count > 10)
750 return -EINVAL;
751
752 i = sscanf(buf, "%u", &u);
753 if (i != 1)
754 return -EINVAL;
755
756 if (u > PICOLCDFB_UPDATE_RATE_LIMIT)
757 return -ERANGE;
758 else if (u == 0)
759 u = PICOLCDFB_UPDATE_RATE_DEFAULT;
760
761 data->fb_update_rate = u;
762 data->fb_defio.delay = HZ / data->fb_update_rate;
763 return count;
764 }
765
766 static DEVICE_ATTR(fb_update_rate, 0666, picolcd_fb_update_rate_show,
767 picolcd_fb_update_rate_store);
768
769 /* initialize Framebuffer device */
picolcd_init_framebuffer(struct picolcd_data * data)770 static int picolcd_init_framebuffer(struct picolcd_data *data)
771 {
772 struct device *dev = &data->hdev->dev;
773 struct fb_info *info = NULL;
774 int i, error = -ENOMEM;
775 u8 *fb_vbitmap = NULL;
776 u8 *fb_bitmap = NULL;
777 u32 *palette;
778
779 fb_bitmap = vmalloc(PICOLCDFB_SIZE*8);
780 if (fb_bitmap == NULL) {
781 dev_err(dev, "can't get a free page for framebuffer\n");
782 goto err_nomem;
783 }
784
785 fb_vbitmap = kmalloc(PICOLCDFB_SIZE, GFP_KERNEL);
786 if (fb_vbitmap == NULL) {
787 dev_err(dev, "can't alloc vbitmap image buffer\n");
788 goto err_nomem;
789 }
790
791 data->fb_update_rate = PICOLCDFB_UPDATE_RATE_DEFAULT;
792 data->fb_defio = picolcd_fb_defio;
793 /* The extra memory is:
794 * - struct picolcd_fb_cleanup_item
795 * - u32 for ref_count
796 * - 256*u32 for pseudo_palette
797 */
798 info = framebuffer_alloc(257 * sizeof(u32) + sizeof(struct picolcd_fb_cleanup_item), dev);
799 if (info == NULL) {
800 dev_err(dev, "failed to allocate a framebuffer\n");
801 goto err_nomem;
802 }
803
804 palette = info->par + sizeof(struct picolcd_fb_cleanup_item);
805 *palette = 1;
806 palette++;
807 for (i = 0; i < 256; i++)
808 palette[i] = i > 0 && i < 16 ? 0xff : 0;
809 info->pseudo_palette = palette;
810 info->fbdefio = &data->fb_defio;
811 info->screen_base = (char __force __iomem *)fb_bitmap;
812 info->fbops = &picolcdfb_ops;
813 info->var = picolcdfb_var;
814 info->fix = picolcdfb_fix;
815 info->fix.smem_len = PICOLCDFB_SIZE*8;
816 info->fix.smem_start = (unsigned long)fb_bitmap;
817 info->par = data;
818 info->flags = FBINFO_FLAG_DEFAULT;
819
820 data->fb_vbitmap = fb_vbitmap;
821 data->fb_bitmap = fb_bitmap;
822 data->fb_bpp = picolcdfb_var.bits_per_pixel;
823 error = picolcd_fb_reset(data, 1);
824 if (error) {
825 dev_err(dev, "failed to configure display\n");
826 goto err_cleanup;
827 }
828 error = device_create_file(dev, &dev_attr_fb_update_rate);
829 if (error) {
830 dev_err(dev, "failed to create sysfs attributes\n");
831 goto err_cleanup;
832 }
833 fb_deferred_io_init(info);
834 data->fb_info = info;
835 error = register_framebuffer(info);
836 if (error) {
837 dev_err(dev, "failed to register framebuffer\n");
838 goto err_sysfs;
839 }
840 /* schedule first output of framebuffer */
841 data->fb_force = 1;
842 schedule_delayed_work(&info->deferred_work, 0);
843 return 0;
844
845 err_sysfs:
846 fb_deferred_io_cleanup(info);
847 device_remove_file(dev, &dev_attr_fb_update_rate);
848 err_cleanup:
849 data->fb_vbitmap = NULL;
850 data->fb_bitmap = NULL;
851 data->fb_bpp = 0;
852 data->fb_info = NULL;
853
854 err_nomem:
855 framebuffer_release(info);
856 vfree(fb_bitmap);
857 kfree(fb_vbitmap);
858 return error;
859 }
860
picolcd_exit_framebuffer(struct picolcd_data * data)861 static void picolcd_exit_framebuffer(struct picolcd_data *data)
862 {
863 struct fb_info *info = data->fb_info;
864 u8 *fb_vbitmap = data->fb_vbitmap;
865
866 if (!info)
867 return;
868
869 info->par = NULL;
870 device_remove_file(&data->hdev->dev, &dev_attr_fb_update_rate);
871 unregister_framebuffer(info);
872 data->fb_vbitmap = NULL;
873 data->fb_bitmap = NULL;
874 data->fb_bpp = 0;
875 data->fb_info = NULL;
876 kfree(fb_vbitmap);
877 }
878
879 #define picolcd_fbinfo(d) ((d)->fb_info)
880 #else
picolcd_fb_reset(struct picolcd_data * data,int clear)881 static inline int picolcd_fb_reset(struct picolcd_data *data, int clear)
882 {
883 return 0;
884 }
picolcd_init_framebuffer(struct picolcd_data * data)885 static inline int picolcd_init_framebuffer(struct picolcd_data *data)
886 {
887 return 0;
888 }
picolcd_exit_framebuffer(struct picolcd_data * data)889 static inline void picolcd_exit_framebuffer(struct picolcd_data *data)
890 {
891 }
892 #define picolcd_fbinfo(d) NULL
893 #endif /* CONFIG_HID_PICOLCD_FB */
894
895 #ifdef CONFIG_HID_PICOLCD_BACKLIGHT
896 /*
897 * backlight class device
898 */
picolcd_get_brightness(struct backlight_device * bdev)899 static int picolcd_get_brightness(struct backlight_device *bdev)
900 {
901 struct picolcd_data *data = bl_get_data(bdev);
902 return data->lcd_brightness;
903 }
904
picolcd_set_brightness(struct backlight_device * bdev)905 static int picolcd_set_brightness(struct backlight_device *bdev)
906 {
907 struct picolcd_data *data = bl_get_data(bdev);
908 struct hid_report *report = picolcd_out_report(REPORT_BRIGHTNESS, data->hdev);
909 unsigned long flags;
910
911 if (!report || report->maxfield != 1 || report->field[0]->report_count != 1)
912 return -ENODEV;
913
914 data->lcd_brightness = bdev->props.brightness & 0x0ff;
915 data->lcd_power = bdev->props.power;
916 spin_lock_irqsave(&data->lock, flags);
917 hid_set_field(report->field[0], 0, data->lcd_power == FB_BLANK_UNBLANK ? data->lcd_brightness : 0);
918 usbhid_submit_report(data->hdev, report, USB_DIR_OUT);
919 spin_unlock_irqrestore(&data->lock, flags);
920 return 0;
921 }
922
picolcd_check_bl_fb(struct backlight_device * bdev,struct fb_info * fb)923 static int picolcd_check_bl_fb(struct backlight_device *bdev, struct fb_info *fb)
924 {
925 return fb && fb == picolcd_fbinfo((struct picolcd_data *)bl_get_data(bdev));
926 }
927
928 static const struct backlight_ops picolcd_blops = {
929 .update_status = picolcd_set_brightness,
930 .get_brightness = picolcd_get_brightness,
931 .check_fb = picolcd_check_bl_fb,
932 };
933
picolcd_init_backlight(struct picolcd_data * data,struct hid_report * report)934 static int picolcd_init_backlight(struct picolcd_data *data, struct hid_report *report)
935 {
936 struct device *dev = &data->hdev->dev;
937 struct backlight_device *bdev;
938 struct backlight_properties props;
939 if (!report)
940 return -ENODEV;
941 if (report->maxfield != 1 || report->field[0]->report_count != 1 ||
942 report->field[0]->report_size != 8) {
943 dev_err(dev, "unsupported BRIGHTNESS report");
944 return -EINVAL;
945 }
946
947 memset(&props, 0, sizeof(props));
948 props.type = BACKLIGHT_RAW;
949 props.max_brightness = 0xff;
950 bdev = backlight_device_register(dev_name(dev), dev, data,
951 &picolcd_blops, &props);
952 if (IS_ERR(bdev)) {
953 dev_err(dev, "failed to register backlight\n");
954 return PTR_ERR(bdev);
955 }
956 bdev->props.brightness = 0xff;
957 data->lcd_brightness = 0xff;
958 data->backlight = bdev;
959 picolcd_set_brightness(bdev);
960 return 0;
961 }
962
picolcd_exit_backlight(struct picolcd_data * data)963 static void picolcd_exit_backlight(struct picolcd_data *data)
964 {
965 struct backlight_device *bdev = data->backlight;
966
967 data->backlight = NULL;
968 if (bdev)
969 backlight_device_unregister(bdev);
970 }
971
picolcd_resume_backlight(struct picolcd_data * data)972 static inline int picolcd_resume_backlight(struct picolcd_data *data)
973 {
974 if (!data->backlight)
975 return 0;
976 return picolcd_set_brightness(data->backlight);
977 }
978
979 #ifdef CONFIG_PM
picolcd_suspend_backlight(struct picolcd_data * data)980 static void picolcd_suspend_backlight(struct picolcd_data *data)
981 {
982 int bl_power = data->lcd_power;
983 if (!data->backlight)
984 return;
985
986 data->backlight->props.power = FB_BLANK_POWERDOWN;
987 picolcd_set_brightness(data->backlight);
988 data->lcd_power = data->backlight->props.power = bl_power;
989 }
990 #endif /* CONFIG_PM */
991 #else
picolcd_init_backlight(struct picolcd_data * data,struct hid_report * report)992 static inline int picolcd_init_backlight(struct picolcd_data *data,
993 struct hid_report *report)
994 {
995 return 0;
996 }
picolcd_exit_backlight(struct picolcd_data * data)997 static inline void picolcd_exit_backlight(struct picolcd_data *data)
998 {
999 }
picolcd_resume_backlight(struct picolcd_data * data)1000 static inline int picolcd_resume_backlight(struct picolcd_data *data)
1001 {
1002 return 0;
1003 }
picolcd_suspend_backlight(struct picolcd_data * data)1004 static inline void picolcd_suspend_backlight(struct picolcd_data *data)
1005 {
1006 }
1007 #endif /* CONFIG_HID_PICOLCD_BACKLIGHT */
1008
1009 #ifdef CONFIG_HID_PICOLCD_LCD
1010 /*
1011 * lcd class device
1012 */
picolcd_get_contrast(struct lcd_device * ldev)1013 static int picolcd_get_contrast(struct lcd_device *ldev)
1014 {
1015 struct picolcd_data *data = lcd_get_data(ldev);
1016 return data->lcd_contrast;
1017 }
1018
picolcd_set_contrast(struct lcd_device * ldev,int contrast)1019 static int picolcd_set_contrast(struct lcd_device *ldev, int contrast)
1020 {
1021 struct picolcd_data *data = lcd_get_data(ldev);
1022 struct hid_report *report = picolcd_out_report(REPORT_CONTRAST, data->hdev);
1023 unsigned long flags;
1024
1025 if (!report || report->maxfield != 1 || report->field[0]->report_count != 1)
1026 return -ENODEV;
1027
1028 data->lcd_contrast = contrast & 0x0ff;
1029 spin_lock_irqsave(&data->lock, flags);
1030 hid_set_field(report->field[0], 0, data->lcd_contrast);
1031 usbhid_submit_report(data->hdev, report, USB_DIR_OUT);
1032 spin_unlock_irqrestore(&data->lock, flags);
1033 return 0;
1034 }
1035
picolcd_check_lcd_fb(struct lcd_device * ldev,struct fb_info * fb)1036 static int picolcd_check_lcd_fb(struct lcd_device *ldev, struct fb_info *fb)
1037 {
1038 return fb && fb == picolcd_fbinfo((struct picolcd_data *)lcd_get_data(ldev));
1039 }
1040
1041 static struct lcd_ops picolcd_lcdops = {
1042 .get_contrast = picolcd_get_contrast,
1043 .set_contrast = picolcd_set_contrast,
1044 .check_fb = picolcd_check_lcd_fb,
1045 };
1046
picolcd_init_lcd(struct picolcd_data * data,struct hid_report * report)1047 static int picolcd_init_lcd(struct picolcd_data *data, struct hid_report *report)
1048 {
1049 struct device *dev = &data->hdev->dev;
1050 struct lcd_device *ldev;
1051
1052 if (!report)
1053 return -ENODEV;
1054 if (report->maxfield != 1 || report->field[0]->report_count != 1 ||
1055 report->field[0]->report_size != 8) {
1056 dev_err(dev, "unsupported CONTRAST report");
1057 return -EINVAL;
1058 }
1059
1060 ldev = lcd_device_register(dev_name(dev), dev, data, &picolcd_lcdops);
1061 if (IS_ERR(ldev)) {
1062 dev_err(dev, "failed to register LCD\n");
1063 return PTR_ERR(ldev);
1064 }
1065 ldev->props.max_contrast = 0x0ff;
1066 data->lcd_contrast = 0xe5;
1067 data->lcd = ldev;
1068 picolcd_set_contrast(ldev, 0xe5);
1069 return 0;
1070 }
1071
picolcd_exit_lcd(struct picolcd_data * data)1072 static void picolcd_exit_lcd(struct picolcd_data *data)
1073 {
1074 struct lcd_device *ldev = data->lcd;
1075
1076 data->lcd = NULL;
1077 if (ldev)
1078 lcd_device_unregister(ldev);
1079 }
1080
picolcd_resume_lcd(struct picolcd_data * data)1081 static inline int picolcd_resume_lcd(struct picolcd_data *data)
1082 {
1083 if (!data->lcd)
1084 return 0;
1085 return picolcd_set_contrast(data->lcd, data->lcd_contrast);
1086 }
1087 #else
picolcd_init_lcd(struct picolcd_data * data,struct hid_report * report)1088 static inline int picolcd_init_lcd(struct picolcd_data *data,
1089 struct hid_report *report)
1090 {
1091 return 0;
1092 }
picolcd_exit_lcd(struct picolcd_data * data)1093 static inline void picolcd_exit_lcd(struct picolcd_data *data)
1094 {
1095 }
picolcd_resume_lcd(struct picolcd_data * data)1096 static inline int picolcd_resume_lcd(struct picolcd_data *data)
1097 {
1098 return 0;
1099 }
1100 #endif /* CONFIG_HID_PICOLCD_LCD */
1101
1102 #ifdef CONFIG_HID_PICOLCD_LEDS
1103 /**
1104 * LED class device
1105 */
picolcd_leds_set(struct picolcd_data * data)1106 static void picolcd_leds_set(struct picolcd_data *data)
1107 {
1108 struct hid_report *report;
1109 unsigned long flags;
1110
1111 if (!data->led[0])
1112 return;
1113 report = picolcd_out_report(REPORT_LED_STATE, data->hdev);
1114 if (!report || report->maxfield != 1 || report->field[0]->report_count != 1)
1115 return;
1116
1117 spin_lock_irqsave(&data->lock, flags);
1118 hid_set_field(report->field[0], 0, data->led_state);
1119 usbhid_submit_report(data->hdev, report, USB_DIR_OUT);
1120 spin_unlock_irqrestore(&data->lock, flags);
1121 }
1122
picolcd_led_set_brightness(struct led_classdev * led_cdev,enum led_brightness value)1123 static void picolcd_led_set_brightness(struct led_classdev *led_cdev,
1124 enum led_brightness value)
1125 {
1126 struct device *dev;
1127 struct hid_device *hdev;
1128 struct picolcd_data *data;
1129 int i, state = 0;
1130
1131 dev = led_cdev->dev->parent;
1132 hdev = container_of(dev, struct hid_device, dev);
1133 data = hid_get_drvdata(hdev);
1134 for (i = 0; i < 8; i++) {
1135 if (led_cdev != data->led[i])
1136 continue;
1137 state = (data->led_state >> i) & 1;
1138 if (value == LED_OFF && state) {
1139 data->led_state &= ~(1 << i);
1140 picolcd_leds_set(data);
1141 } else if (value != LED_OFF && !state) {
1142 data->led_state |= 1 << i;
1143 picolcd_leds_set(data);
1144 }
1145 break;
1146 }
1147 }
1148
picolcd_led_get_brightness(struct led_classdev * led_cdev)1149 static enum led_brightness picolcd_led_get_brightness(struct led_classdev *led_cdev)
1150 {
1151 struct device *dev;
1152 struct hid_device *hdev;
1153 struct picolcd_data *data;
1154 int i, value = 0;
1155
1156 dev = led_cdev->dev->parent;
1157 hdev = container_of(dev, struct hid_device, dev);
1158 data = hid_get_drvdata(hdev);
1159 for (i = 0; i < 8; i++)
1160 if (led_cdev == data->led[i]) {
1161 value = (data->led_state >> i) & 1;
1162 break;
1163 }
1164 return value ? LED_FULL : LED_OFF;
1165 }
1166
picolcd_init_leds(struct picolcd_data * data,struct hid_report * report)1167 static int picolcd_init_leds(struct picolcd_data *data, struct hid_report *report)
1168 {
1169 struct device *dev = &data->hdev->dev;
1170 struct led_classdev *led;
1171 size_t name_sz = strlen(dev_name(dev)) + 8;
1172 char *name;
1173 int i, ret = 0;
1174
1175 if (!report)
1176 return -ENODEV;
1177 if (report->maxfield != 1 || report->field[0]->report_count != 1 ||
1178 report->field[0]->report_size != 8) {
1179 dev_err(dev, "unsupported LED_STATE report");
1180 return -EINVAL;
1181 }
1182
1183 for (i = 0; i < 8; i++) {
1184 led = kzalloc(sizeof(struct led_classdev)+name_sz, GFP_KERNEL);
1185 if (!led) {
1186 dev_err(dev, "can't allocate memory for LED %d\n", i);
1187 ret = -ENOMEM;
1188 goto err;
1189 }
1190 name = (void *)(&led[1]);
1191 snprintf(name, name_sz, "%s::GPO%d", dev_name(dev), i);
1192 led->name = name;
1193 led->brightness = 0;
1194 led->max_brightness = 1;
1195 led->brightness_get = picolcd_led_get_brightness;
1196 led->brightness_set = picolcd_led_set_brightness;
1197
1198 data->led[i] = led;
1199 ret = led_classdev_register(dev, data->led[i]);
1200 if (ret) {
1201 data->led[i] = NULL;
1202 kfree(led);
1203 dev_err(dev, "can't register LED %d\n", i);
1204 goto err;
1205 }
1206 }
1207 return 0;
1208 err:
1209 for (i = 0; i < 8; i++)
1210 if (data->led[i]) {
1211 led = data->led[i];
1212 data->led[i] = NULL;
1213 led_classdev_unregister(led);
1214 kfree(led);
1215 }
1216 return ret;
1217 }
1218
picolcd_exit_leds(struct picolcd_data * data)1219 static void picolcd_exit_leds(struct picolcd_data *data)
1220 {
1221 struct led_classdev *led;
1222 int i;
1223
1224 for (i = 0; i < 8; i++) {
1225 led = data->led[i];
1226 data->led[i] = NULL;
1227 if (!led)
1228 continue;
1229 led_classdev_unregister(led);
1230 kfree(led);
1231 }
1232 }
1233
1234 #else
picolcd_init_leds(struct picolcd_data * data,struct hid_report * report)1235 static inline int picolcd_init_leds(struct picolcd_data *data,
1236 struct hid_report *report)
1237 {
1238 return 0;
1239 }
picolcd_exit_leds(struct picolcd_data * data)1240 static inline void picolcd_exit_leds(struct picolcd_data *data)
1241 {
1242 }
picolcd_leds_set(struct picolcd_data * data)1243 static inline int picolcd_leds_set(struct picolcd_data *data)
1244 {
1245 return 0;
1246 }
1247 #endif /* CONFIG_HID_PICOLCD_LEDS */
1248
1249 /*
1250 * input class device
1251 */
picolcd_raw_keypad(struct picolcd_data * data,struct hid_report * report,u8 * raw_data,int size)1252 static int picolcd_raw_keypad(struct picolcd_data *data,
1253 struct hid_report *report, u8 *raw_data, int size)
1254 {
1255 /*
1256 * Keypad event
1257 * First and second data bytes list currently pressed keys,
1258 * 0x00 means no key and at most 2 keys may be pressed at same time
1259 */
1260 int i, j;
1261
1262 /* determine newly pressed keys */
1263 for (i = 0; i < size; i++) {
1264 unsigned int key_code;
1265 if (raw_data[i] == 0)
1266 continue;
1267 for (j = 0; j < sizeof(data->pressed_keys); j++)
1268 if (data->pressed_keys[j] == raw_data[i])
1269 goto key_already_down;
1270 for (j = 0; j < sizeof(data->pressed_keys); j++)
1271 if (data->pressed_keys[j] == 0) {
1272 data->pressed_keys[j] = raw_data[i];
1273 break;
1274 }
1275 input_event(data->input_keys, EV_MSC, MSC_SCAN, raw_data[i]);
1276 if (raw_data[i] < PICOLCD_KEYS)
1277 key_code = data->keycode[raw_data[i]];
1278 else
1279 key_code = KEY_UNKNOWN;
1280 if (key_code != KEY_UNKNOWN) {
1281 dbg_hid(PICOLCD_NAME " got key press for %u:%d",
1282 raw_data[i], key_code);
1283 input_report_key(data->input_keys, key_code, 1);
1284 }
1285 input_sync(data->input_keys);
1286 key_already_down:
1287 continue;
1288 }
1289
1290 /* determine newly released keys */
1291 for (j = 0; j < sizeof(data->pressed_keys); j++) {
1292 unsigned int key_code;
1293 if (data->pressed_keys[j] == 0)
1294 continue;
1295 for (i = 0; i < size; i++)
1296 if (data->pressed_keys[j] == raw_data[i])
1297 goto key_still_down;
1298 input_event(data->input_keys, EV_MSC, MSC_SCAN, data->pressed_keys[j]);
1299 if (data->pressed_keys[j] < PICOLCD_KEYS)
1300 key_code = data->keycode[data->pressed_keys[j]];
1301 else
1302 key_code = KEY_UNKNOWN;
1303 if (key_code != KEY_UNKNOWN) {
1304 dbg_hid(PICOLCD_NAME " got key release for %u:%d",
1305 data->pressed_keys[j], key_code);
1306 input_report_key(data->input_keys, key_code, 0);
1307 }
1308 input_sync(data->input_keys);
1309 data->pressed_keys[j] = 0;
1310 key_still_down:
1311 continue;
1312 }
1313 return 1;
1314 }
1315
picolcd_raw_cir(struct picolcd_data * data,struct hid_report * report,u8 * raw_data,int size)1316 static int picolcd_raw_cir(struct picolcd_data *data,
1317 struct hid_report *report, u8 *raw_data, int size)
1318 {
1319 /* Need understanding of CIR data format to implement ... */
1320 return 1;
1321 }
1322
picolcd_check_version(struct hid_device * hdev)1323 static int picolcd_check_version(struct hid_device *hdev)
1324 {
1325 struct picolcd_data *data = hid_get_drvdata(hdev);
1326 struct picolcd_pending *verinfo;
1327 int ret = 0;
1328
1329 if (!data)
1330 return -ENODEV;
1331
1332 verinfo = picolcd_send_and_wait(hdev, REPORT_VERSION, NULL, 0);
1333 if (!verinfo) {
1334 hid_err(hdev, "no version response from PicoLCD\n");
1335 return -ENODEV;
1336 }
1337
1338 if (verinfo->raw_size == 2) {
1339 data->version[0] = verinfo->raw_data[1];
1340 data->version[1] = verinfo->raw_data[0];
1341 if (data->status & PICOLCD_BOOTLOADER) {
1342 hid_info(hdev, "PicoLCD, bootloader version %d.%d\n",
1343 verinfo->raw_data[1], verinfo->raw_data[0]);
1344 } else {
1345 hid_info(hdev, "PicoLCD, firmware version %d.%d\n",
1346 verinfo->raw_data[1], verinfo->raw_data[0]);
1347 }
1348 } else {
1349 hid_err(hdev, "confused, got unexpected version response from PicoLCD\n");
1350 ret = -EINVAL;
1351 }
1352 kfree(verinfo);
1353 return ret;
1354 }
1355
1356 /*
1357 * Reset our device and wait for answer to VERSION request
1358 */
picolcd_reset(struct hid_device * hdev)1359 static int picolcd_reset(struct hid_device *hdev)
1360 {
1361 struct picolcd_data *data = hid_get_drvdata(hdev);
1362 struct hid_report *report = picolcd_out_report(REPORT_RESET, hdev);
1363 unsigned long flags;
1364 int error;
1365
1366 if (!data || !report || report->maxfield != 1)
1367 return -ENODEV;
1368
1369 spin_lock_irqsave(&data->lock, flags);
1370 if (hdev->product == USB_DEVICE_ID_PICOLCD_BOOTLOADER)
1371 data->status |= PICOLCD_BOOTLOADER;
1372
1373 /* perform the reset */
1374 hid_set_field(report->field[0], 0, 1);
1375 usbhid_submit_report(hdev, report, USB_DIR_OUT);
1376 spin_unlock_irqrestore(&data->lock, flags);
1377
1378 error = picolcd_check_version(hdev);
1379 if (error)
1380 return error;
1381
1382 picolcd_resume_lcd(data);
1383 picolcd_resume_backlight(data);
1384 #ifdef CONFIG_HID_PICOLCD_FB
1385 if (data->fb_info)
1386 schedule_delayed_work(&data->fb_info->deferred_work, 0);
1387 #endif /* CONFIG_HID_PICOLCD_FB */
1388
1389 picolcd_leds_set(data);
1390 return 0;
1391 }
1392
1393 /*
1394 * The "operation_mode" sysfs attribute
1395 */
picolcd_operation_mode_show(struct device * dev,struct device_attribute * attr,char * buf)1396 static ssize_t picolcd_operation_mode_show(struct device *dev,
1397 struct device_attribute *attr, char *buf)
1398 {
1399 struct picolcd_data *data = dev_get_drvdata(dev);
1400
1401 if (data->status & PICOLCD_BOOTLOADER)
1402 return snprintf(buf, PAGE_SIZE, "[bootloader] lcd\n");
1403 else
1404 return snprintf(buf, PAGE_SIZE, "bootloader [lcd]\n");
1405 }
1406
picolcd_operation_mode_store(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)1407 static ssize_t picolcd_operation_mode_store(struct device *dev,
1408 struct device_attribute *attr, const char *buf, size_t count)
1409 {
1410 struct picolcd_data *data = dev_get_drvdata(dev);
1411 struct hid_report *report = NULL;
1412 size_t cnt = count;
1413 int timeout = data->opmode_delay;
1414 unsigned long flags;
1415
1416 if (cnt >= 3 && strncmp("lcd", buf, 3) == 0) {
1417 if (data->status & PICOLCD_BOOTLOADER)
1418 report = picolcd_out_report(REPORT_EXIT_FLASHER, data->hdev);
1419 buf += 3;
1420 cnt -= 3;
1421 } else if (cnt >= 10 && strncmp("bootloader", buf, 10) == 0) {
1422 if (!(data->status & PICOLCD_BOOTLOADER))
1423 report = picolcd_out_report(REPORT_EXIT_KEYBOARD, data->hdev);
1424 buf += 10;
1425 cnt -= 10;
1426 }
1427 if (!report)
1428 return -EINVAL;
1429
1430 while (cnt > 0 && (buf[cnt-1] == '\n' || buf[cnt-1] == '\r'))
1431 cnt--;
1432 if (cnt != 0)
1433 return -EINVAL;
1434
1435 spin_lock_irqsave(&data->lock, flags);
1436 hid_set_field(report->field[0], 0, timeout & 0xff);
1437 hid_set_field(report->field[0], 1, (timeout >> 8) & 0xff);
1438 usbhid_submit_report(data->hdev, report, USB_DIR_OUT);
1439 spin_unlock_irqrestore(&data->lock, flags);
1440 return count;
1441 }
1442
1443 static DEVICE_ATTR(operation_mode, 0644, picolcd_operation_mode_show,
1444 picolcd_operation_mode_store);
1445
1446 /*
1447 * The "operation_mode_delay" sysfs attribute
1448 */
picolcd_operation_mode_delay_show(struct device * dev,struct device_attribute * attr,char * buf)1449 static ssize_t picolcd_operation_mode_delay_show(struct device *dev,
1450 struct device_attribute *attr, char *buf)
1451 {
1452 struct picolcd_data *data = dev_get_drvdata(dev);
1453
1454 return snprintf(buf, PAGE_SIZE, "%hu\n", data->opmode_delay);
1455 }
1456
picolcd_operation_mode_delay_store(struct device * dev,struct device_attribute * attr,const char * buf,size_t count)1457 static ssize_t picolcd_operation_mode_delay_store(struct device *dev,
1458 struct device_attribute *attr, const char *buf, size_t count)
1459 {
1460 struct picolcd_data *data = dev_get_drvdata(dev);
1461 unsigned u;
1462 if (sscanf(buf, "%u", &u) != 1)
1463 return -EINVAL;
1464 if (u > 30000)
1465 return -EINVAL;
1466 else
1467 data->opmode_delay = u;
1468 return count;
1469 }
1470
1471 static DEVICE_ATTR(operation_mode_delay, 0644, picolcd_operation_mode_delay_show,
1472 picolcd_operation_mode_delay_store);
1473
1474
1475 #ifdef CONFIG_DEBUG_FS
1476 /*
1477 * The "reset" file
1478 */
picolcd_debug_reset_show(struct seq_file * f,void * p)1479 static int picolcd_debug_reset_show(struct seq_file *f, void *p)
1480 {
1481 if (picolcd_fbinfo((struct picolcd_data *)f->private))
1482 seq_printf(f, "all fb\n");
1483 else
1484 seq_printf(f, "all\n");
1485 return 0;
1486 }
1487
picolcd_debug_reset_open(struct inode * inode,struct file * f)1488 static int picolcd_debug_reset_open(struct inode *inode, struct file *f)
1489 {
1490 return single_open(f, picolcd_debug_reset_show, inode->i_private);
1491 }
1492
picolcd_debug_reset_write(struct file * f,const char __user * user_buf,size_t count,loff_t * ppos)1493 static ssize_t picolcd_debug_reset_write(struct file *f, const char __user *user_buf,
1494 size_t count, loff_t *ppos)
1495 {
1496 struct picolcd_data *data = ((struct seq_file *)f->private_data)->private;
1497 char buf[32];
1498 size_t cnt = min(count, sizeof(buf)-1);
1499 if (copy_from_user(buf, user_buf, cnt))
1500 return -EFAULT;
1501
1502 while (cnt > 0 && (buf[cnt-1] == ' ' || buf[cnt-1] == '\n'))
1503 cnt--;
1504 buf[cnt] = '\0';
1505 if (strcmp(buf, "all") == 0) {
1506 picolcd_reset(data->hdev);
1507 picolcd_fb_reset(data, 1);
1508 } else if (strcmp(buf, "fb") == 0) {
1509 picolcd_fb_reset(data, 1);
1510 } else {
1511 return -EINVAL;
1512 }
1513 return count;
1514 }
1515
1516 static const struct file_operations picolcd_debug_reset_fops = {
1517 .owner = THIS_MODULE,
1518 .open = picolcd_debug_reset_open,
1519 .read = seq_read,
1520 .llseek = seq_lseek,
1521 .write = picolcd_debug_reset_write,
1522 .release = single_release,
1523 };
1524
1525 /*
1526 * The "eeprom" file
1527 */
picolcd_debug_eeprom_read(struct file * f,char __user * u,size_t s,loff_t * off)1528 static ssize_t picolcd_debug_eeprom_read(struct file *f, char __user *u,
1529 size_t s, loff_t *off)
1530 {
1531 struct picolcd_data *data = f->private_data;
1532 struct picolcd_pending *resp;
1533 u8 raw_data[3];
1534 ssize_t ret = -EIO;
1535
1536 if (s == 0)
1537 return -EINVAL;
1538 if (*off > 0x0ff)
1539 return 0;
1540
1541 /* prepare buffer with info about what we want to read (addr & len) */
1542 raw_data[0] = *off & 0xff;
1543 raw_data[1] = (*off >> 8) & 0xff;
1544 raw_data[2] = s < 20 ? s : 20;
1545 if (*off + raw_data[2] > 0xff)
1546 raw_data[2] = 0x100 - *off;
1547 resp = picolcd_send_and_wait(data->hdev, REPORT_EE_READ, raw_data,
1548 sizeof(raw_data));
1549 if (!resp)
1550 return -EIO;
1551
1552 if (resp->in_report && resp->in_report->id == REPORT_EE_DATA) {
1553 /* successful read :) */
1554 ret = resp->raw_data[2];
1555 if (ret > s)
1556 ret = s;
1557 if (copy_to_user(u, resp->raw_data+3, ret))
1558 ret = -EFAULT;
1559 else
1560 *off += ret;
1561 } /* anything else is some kind of IO error */
1562
1563 kfree(resp);
1564 return ret;
1565 }
1566
picolcd_debug_eeprom_write(struct file * f,const char __user * u,size_t s,loff_t * off)1567 static ssize_t picolcd_debug_eeprom_write(struct file *f, const char __user *u,
1568 size_t s, loff_t *off)
1569 {
1570 struct picolcd_data *data = f->private_data;
1571 struct picolcd_pending *resp;
1572 ssize_t ret = -EIO;
1573 u8 raw_data[23];
1574
1575 if (s == 0)
1576 return -EINVAL;
1577 if (*off > 0x0ff)
1578 return -ENOSPC;
1579
1580 memset(raw_data, 0, sizeof(raw_data));
1581 raw_data[0] = *off & 0xff;
1582 raw_data[1] = (*off >> 8) & 0xff;
1583 raw_data[2] = min((size_t)20, s);
1584 if (*off + raw_data[2] > 0xff)
1585 raw_data[2] = 0x100 - *off;
1586
1587 if (copy_from_user(raw_data+3, u, min((u8)20, raw_data[2])))
1588 return -EFAULT;
1589 resp = picolcd_send_and_wait(data->hdev, REPORT_EE_WRITE, raw_data,
1590 sizeof(raw_data));
1591
1592 if (!resp)
1593 return -EIO;
1594
1595 if (resp->in_report && resp->in_report->id == REPORT_EE_DATA) {
1596 /* check if written data matches */
1597 if (memcmp(raw_data, resp->raw_data, 3+raw_data[2]) == 0) {
1598 *off += raw_data[2];
1599 ret = raw_data[2];
1600 }
1601 }
1602 kfree(resp);
1603 return ret;
1604 }
1605
1606 /*
1607 * Notes:
1608 * - read/write happens in chunks of at most 20 bytes, it's up to userspace
1609 * to loop in order to get more data.
1610 * - on write errors on otherwise correct write request the bytes
1611 * that should have been written are in undefined state.
1612 */
1613 static const struct file_operations picolcd_debug_eeprom_fops = {
1614 .owner = THIS_MODULE,
1615 .open = simple_open,
1616 .read = picolcd_debug_eeprom_read,
1617 .write = picolcd_debug_eeprom_write,
1618 .llseek = generic_file_llseek,
1619 };
1620
1621 /*
1622 * The "flash" file
1623 */
1624 /* record a flash address to buf (bounds check to be done by caller) */
_picolcd_flash_setaddr(struct picolcd_data * data,u8 * buf,long off)1625 static int _picolcd_flash_setaddr(struct picolcd_data *data, u8 *buf, long off)
1626 {
1627 buf[0] = off & 0xff;
1628 buf[1] = (off >> 8) & 0xff;
1629 if (data->addr_sz == 3)
1630 buf[2] = (off >> 16) & 0xff;
1631 return data->addr_sz == 2 ? 2 : 3;
1632 }
1633
1634 /* read a given size of data (bounds check to be done by caller) */
_picolcd_flash_read(struct picolcd_data * data,int report_id,char __user * u,size_t s,loff_t * off)1635 static ssize_t _picolcd_flash_read(struct picolcd_data *data, int report_id,
1636 char __user *u, size_t s, loff_t *off)
1637 {
1638 struct picolcd_pending *resp;
1639 u8 raw_data[4];
1640 ssize_t ret = 0;
1641 int len_off, err = -EIO;
1642
1643 while (s > 0) {
1644 err = -EIO;
1645 len_off = _picolcd_flash_setaddr(data, raw_data, *off);
1646 raw_data[len_off] = s > 32 ? 32 : s;
1647 resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, len_off+1);
1648 if (!resp || !resp->in_report)
1649 goto skip;
1650 if (resp->in_report->id == REPORT_MEMORY ||
1651 resp->in_report->id == REPORT_BL_READ_MEMORY) {
1652 if (memcmp(raw_data, resp->raw_data, len_off+1) != 0)
1653 goto skip;
1654 if (copy_to_user(u+ret, resp->raw_data+len_off+1, raw_data[len_off])) {
1655 err = -EFAULT;
1656 goto skip;
1657 }
1658 *off += raw_data[len_off];
1659 s -= raw_data[len_off];
1660 ret += raw_data[len_off];
1661 err = 0;
1662 }
1663 skip:
1664 kfree(resp);
1665 if (err)
1666 return ret > 0 ? ret : err;
1667 }
1668 return ret;
1669 }
1670
picolcd_debug_flash_read(struct file * f,char __user * u,size_t s,loff_t * off)1671 static ssize_t picolcd_debug_flash_read(struct file *f, char __user *u,
1672 size_t s, loff_t *off)
1673 {
1674 struct picolcd_data *data = f->private_data;
1675
1676 if (s == 0)
1677 return -EINVAL;
1678 if (*off > 0x05fff)
1679 return 0;
1680 if (*off + s > 0x05fff)
1681 s = 0x06000 - *off;
1682
1683 if (data->status & PICOLCD_BOOTLOADER)
1684 return _picolcd_flash_read(data, REPORT_BL_READ_MEMORY, u, s, off);
1685 else
1686 return _picolcd_flash_read(data, REPORT_READ_MEMORY, u, s, off);
1687 }
1688
1689 /* erase block aligned to 64bytes boundary */
_picolcd_flash_erase64(struct picolcd_data * data,int report_id,loff_t * off)1690 static ssize_t _picolcd_flash_erase64(struct picolcd_data *data, int report_id,
1691 loff_t *off)
1692 {
1693 struct picolcd_pending *resp;
1694 u8 raw_data[3];
1695 int len_off;
1696 ssize_t ret = -EIO;
1697
1698 if (*off & 0x3f)
1699 return -EINVAL;
1700
1701 len_off = _picolcd_flash_setaddr(data, raw_data, *off);
1702 resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, len_off);
1703 if (!resp || !resp->in_report)
1704 goto skip;
1705 if (resp->in_report->id == REPORT_MEMORY ||
1706 resp->in_report->id == REPORT_BL_ERASE_MEMORY) {
1707 if (memcmp(raw_data, resp->raw_data, len_off) != 0)
1708 goto skip;
1709 ret = 0;
1710 }
1711 skip:
1712 kfree(resp);
1713 return ret;
1714 }
1715
1716 /* write a given size of data (bounds check to be done by caller) */
_picolcd_flash_write(struct picolcd_data * data,int report_id,const char __user * u,size_t s,loff_t * off)1717 static ssize_t _picolcd_flash_write(struct picolcd_data *data, int report_id,
1718 const char __user *u, size_t s, loff_t *off)
1719 {
1720 struct picolcd_pending *resp;
1721 u8 raw_data[36];
1722 ssize_t ret = 0;
1723 int len_off, err = -EIO;
1724
1725 while (s > 0) {
1726 err = -EIO;
1727 len_off = _picolcd_flash_setaddr(data, raw_data, *off);
1728 raw_data[len_off] = s > 32 ? 32 : s;
1729 if (copy_from_user(raw_data+len_off+1, u, raw_data[len_off])) {
1730 err = -EFAULT;
1731 break;
1732 }
1733 resp = picolcd_send_and_wait(data->hdev, report_id, raw_data,
1734 len_off+1+raw_data[len_off]);
1735 if (!resp || !resp->in_report)
1736 goto skip;
1737 if (resp->in_report->id == REPORT_MEMORY ||
1738 resp->in_report->id == REPORT_BL_WRITE_MEMORY) {
1739 if (memcmp(raw_data, resp->raw_data, len_off+1+raw_data[len_off]) != 0)
1740 goto skip;
1741 *off += raw_data[len_off];
1742 s -= raw_data[len_off];
1743 ret += raw_data[len_off];
1744 err = 0;
1745 }
1746 skip:
1747 kfree(resp);
1748 if (err)
1749 break;
1750 }
1751 return ret > 0 ? ret : err;
1752 }
1753
picolcd_debug_flash_write(struct file * f,const char __user * u,size_t s,loff_t * off)1754 static ssize_t picolcd_debug_flash_write(struct file *f, const char __user *u,
1755 size_t s, loff_t *off)
1756 {
1757 struct picolcd_data *data = f->private_data;
1758 ssize_t err, ret = 0;
1759 int report_erase, report_write;
1760
1761 if (s == 0)
1762 return -EINVAL;
1763 if (*off > 0x5fff)
1764 return -ENOSPC;
1765 if (s & 0x3f)
1766 return -EINVAL;
1767 if (*off & 0x3f)
1768 return -EINVAL;
1769
1770 if (data->status & PICOLCD_BOOTLOADER) {
1771 report_erase = REPORT_BL_ERASE_MEMORY;
1772 report_write = REPORT_BL_WRITE_MEMORY;
1773 } else {
1774 report_erase = REPORT_ERASE_MEMORY;
1775 report_write = REPORT_WRITE_MEMORY;
1776 }
1777 mutex_lock(&data->mutex_flash);
1778 while (s > 0) {
1779 err = _picolcd_flash_erase64(data, report_erase, off);
1780 if (err)
1781 break;
1782 err = _picolcd_flash_write(data, report_write, u, 64, off);
1783 if (err < 0)
1784 break;
1785 ret += err;
1786 *off += err;
1787 s -= err;
1788 if (err != 64)
1789 break;
1790 }
1791 mutex_unlock(&data->mutex_flash);
1792 return ret > 0 ? ret : err;
1793 }
1794
1795 /*
1796 * Notes:
1797 * - concurrent writing is prevented by mutex and all writes must be
1798 * n*64 bytes and 64-byte aligned, each write being preceded by an
1799 * ERASE which erases a 64byte block.
1800 * If less than requested was written or an error is returned for an
1801 * otherwise correct write request the next 64-byte block which should
1802 * have been written is in undefined state (mostly: original, erased,
1803 * (half-)written with write error)
1804 * - reading can happen without special restriction
1805 */
1806 static const struct file_operations picolcd_debug_flash_fops = {
1807 .owner = THIS_MODULE,
1808 .open = simple_open,
1809 .read = picolcd_debug_flash_read,
1810 .write = picolcd_debug_flash_write,
1811 .llseek = generic_file_llseek,
1812 };
1813
1814
1815 /*
1816 * Helper code for HID report level dumping/debugging
1817 */
1818 static const char *error_codes[] = {
1819 "success", "parameter missing", "data_missing", "block readonly",
1820 "block not erasable", "block too big", "section overflow",
1821 "invalid command length", "invalid data length",
1822 };
1823
dump_buff_as_hex(char * dst,size_t dst_sz,const u8 * data,const size_t data_len)1824 static void dump_buff_as_hex(char *dst, size_t dst_sz, const u8 *data,
1825 const size_t data_len)
1826 {
1827 int i, j;
1828 for (i = j = 0; i < data_len && j + 3 < dst_sz; i++) {
1829 dst[j++] = hex_asc[(data[i] >> 4) & 0x0f];
1830 dst[j++] = hex_asc[data[i] & 0x0f];
1831 dst[j++] = ' ';
1832 }
1833 if (j < dst_sz) {
1834 dst[j--] = '\0';
1835 dst[j] = '\n';
1836 } else
1837 dst[j] = '\0';
1838 }
1839
picolcd_debug_out_report(struct picolcd_data * data,struct hid_device * hdev,struct hid_report * report)1840 static void picolcd_debug_out_report(struct picolcd_data *data,
1841 struct hid_device *hdev, struct hid_report *report)
1842 {
1843 u8 raw_data[70];
1844 int raw_size = (report->size >> 3) + 1;
1845 char *buff;
1846 #define BUFF_SZ 256
1847
1848 /* Avoid unnecessary overhead if debugfs is disabled */
1849 if (!hdev->debug_events)
1850 return;
1851
1852 buff = kmalloc(BUFF_SZ, GFP_ATOMIC);
1853 if (!buff)
1854 return;
1855
1856 snprintf(buff, BUFF_SZ, "\nout report %d (size %d) = ",
1857 report->id, raw_size);
1858 hid_debug_event(hdev, buff);
1859 if (raw_size + 5 > sizeof(raw_data)) {
1860 kfree(buff);
1861 hid_debug_event(hdev, " TOO BIG\n");
1862 return;
1863 } else {
1864 raw_data[0] = report->id;
1865 hid_output_report(report, raw_data);
1866 dump_buff_as_hex(buff, BUFF_SZ, raw_data, raw_size);
1867 hid_debug_event(hdev, buff);
1868 }
1869
1870 switch (report->id) {
1871 case REPORT_LED_STATE:
1872 /* 1 data byte with GPO state */
1873 snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
1874 "REPORT_LED_STATE", report->id, raw_size-1);
1875 hid_debug_event(hdev, buff);
1876 snprintf(buff, BUFF_SZ, "\tGPO state: 0x%02x\n", raw_data[1]);
1877 hid_debug_event(hdev, buff);
1878 break;
1879 case REPORT_BRIGHTNESS:
1880 /* 1 data byte with brightness */
1881 snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
1882 "REPORT_BRIGHTNESS", report->id, raw_size-1);
1883 hid_debug_event(hdev, buff);
1884 snprintf(buff, BUFF_SZ, "\tBrightness: 0x%02x\n", raw_data[1]);
1885 hid_debug_event(hdev, buff);
1886 break;
1887 case REPORT_CONTRAST:
1888 /* 1 data byte with contrast */
1889 snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
1890 "REPORT_CONTRAST", report->id, raw_size-1);
1891 hid_debug_event(hdev, buff);
1892 snprintf(buff, BUFF_SZ, "\tContrast: 0x%02x\n", raw_data[1]);
1893 hid_debug_event(hdev, buff);
1894 break;
1895 case REPORT_RESET:
1896 /* 2 data bytes with reset duration in ms */
1897 snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
1898 "REPORT_RESET", report->id, raw_size-1);
1899 hid_debug_event(hdev, buff);
1900 snprintf(buff, BUFF_SZ, "\tDuration: 0x%02x%02x (%dms)\n",
1901 raw_data[2], raw_data[1], raw_data[2] << 8 | raw_data[1]);
1902 hid_debug_event(hdev, buff);
1903 break;
1904 case REPORT_LCD_CMD:
1905 /* 63 data bytes with LCD commands */
1906 snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
1907 "REPORT_LCD_CMD", report->id, raw_size-1);
1908 hid_debug_event(hdev, buff);
1909 /* TODO: format decoding */
1910 break;
1911 case REPORT_LCD_DATA:
1912 /* 63 data bytes with LCD data */
1913 snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
1914 "REPORT_LCD_CMD", report->id, raw_size-1);
1915 /* TODO: format decoding */
1916 hid_debug_event(hdev, buff);
1917 break;
1918 case REPORT_LCD_CMD_DATA:
1919 /* 63 data bytes with LCD commands and data */
1920 snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
1921 "REPORT_LCD_CMD", report->id, raw_size-1);
1922 /* TODO: format decoding */
1923 hid_debug_event(hdev, buff);
1924 break;
1925 case REPORT_EE_READ:
1926 /* 3 data bytes with read area description */
1927 snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
1928 "REPORT_EE_READ", report->id, raw_size-1);
1929 hid_debug_event(hdev, buff);
1930 snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n",
1931 raw_data[2], raw_data[1]);
1932 hid_debug_event(hdev, buff);
1933 snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]);
1934 hid_debug_event(hdev, buff);
1935 break;
1936 case REPORT_EE_WRITE:
1937 /* 3+1..20 data bytes with write area description */
1938 snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
1939 "REPORT_EE_WRITE", report->id, raw_size-1);
1940 hid_debug_event(hdev, buff);
1941 snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n",
1942 raw_data[2], raw_data[1]);
1943 hid_debug_event(hdev, buff);
1944 snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]);
1945 hid_debug_event(hdev, buff);
1946 if (raw_data[3] == 0) {
1947 snprintf(buff, BUFF_SZ, "\tNo data\n");
1948 } else if (raw_data[3] + 4 <= raw_size) {
1949 snprintf(buff, BUFF_SZ, "\tData: ");
1950 hid_debug_event(hdev, buff);
1951 dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]);
1952 } else {
1953 snprintf(buff, BUFF_SZ, "\tData overflowed\n");
1954 }
1955 hid_debug_event(hdev, buff);
1956 break;
1957 case REPORT_ERASE_MEMORY:
1958 case REPORT_BL_ERASE_MEMORY:
1959 /* 3 data bytes with pointer inside erase block */
1960 snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
1961 "REPORT_ERASE_MEMORY", report->id, raw_size-1);
1962 hid_debug_event(hdev, buff);
1963 switch (data->addr_sz) {
1964 case 2:
1965 snprintf(buff, BUFF_SZ, "\tAddress inside 64 byte block: 0x%02x%02x\n",
1966 raw_data[2], raw_data[1]);
1967 break;
1968 case 3:
1969 snprintf(buff, BUFF_SZ, "\tAddress inside 64 byte block: 0x%02x%02x%02x\n",
1970 raw_data[3], raw_data[2], raw_data[1]);
1971 break;
1972 default:
1973 snprintf(buff, BUFF_SZ, "\tNot supported\n");
1974 }
1975 hid_debug_event(hdev, buff);
1976 break;
1977 case REPORT_READ_MEMORY:
1978 case REPORT_BL_READ_MEMORY:
1979 /* 4 data bytes with read area description */
1980 snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
1981 "REPORT_READ_MEMORY", report->id, raw_size-1);
1982 hid_debug_event(hdev, buff);
1983 switch (data->addr_sz) {
1984 case 2:
1985 snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n",
1986 raw_data[2], raw_data[1]);
1987 hid_debug_event(hdev, buff);
1988 snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]);
1989 break;
1990 case 3:
1991 snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n",
1992 raw_data[3], raw_data[2], raw_data[1]);
1993 hid_debug_event(hdev, buff);
1994 snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]);
1995 break;
1996 default:
1997 snprintf(buff, BUFF_SZ, "\tNot supported\n");
1998 }
1999 hid_debug_event(hdev, buff);
2000 break;
2001 case REPORT_WRITE_MEMORY:
2002 case REPORT_BL_WRITE_MEMORY:
2003 /* 4+1..32 data bytes with write adrea description */
2004 snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
2005 "REPORT_WRITE_MEMORY", report->id, raw_size-1);
2006 hid_debug_event(hdev, buff);
2007 switch (data->addr_sz) {
2008 case 2:
2009 snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n",
2010 raw_data[2], raw_data[1]);
2011 hid_debug_event(hdev, buff);
2012 snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]);
2013 hid_debug_event(hdev, buff);
2014 if (raw_data[3] == 0) {
2015 snprintf(buff, BUFF_SZ, "\tNo data\n");
2016 } else if (raw_data[3] + 4 <= raw_size) {
2017 snprintf(buff, BUFF_SZ, "\tData: ");
2018 hid_debug_event(hdev, buff);
2019 dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]);
2020 } else {
2021 snprintf(buff, BUFF_SZ, "\tData overflowed\n");
2022 }
2023 break;
2024 case 3:
2025 snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n",
2026 raw_data[3], raw_data[2], raw_data[1]);
2027 hid_debug_event(hdev, buff);
2028 snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]);
2029 hid_debug_event(hdev, buff);
2030 if (raw_data[4] == 0) {
2031 snprintf(buff, BUFF_SZ, "\tNo data\n");
2032 } else if (raw_data[4] + 5 <= raw_size) {
2033 snprintf(buff, BUFF_SZ, "\tData: ");
2034 hid_debug_event(hdev, buff);
2035 dump_buff_as_hex(buff, BUFF_SZ, raw_data+5, raw_data[4]);
2036 } else {
2037 snprintf(buff, BUFF_SZ, "\tData overflowed\n");
2038 }
2039 break;
2040 default:
2041 snprintf(buff, BUFF_SZ, "\tNot supported\n");
2042 }
2043 hid_debug_event(hdev, buff);
2044 break;
2045 case REPORT_SPLASH_RESTART:
2046 /* TODO */
2047 break;
2048 case REPORT_EXIT_KEYBOARD:
2049 snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
2050 "REPORT_EXIT_KEYBOARD", report->id, raw_size-1);
2051 hid_debug_event(hdev, buff);
2052 snprintf(buff, BUFF_SZ, "\tRestart delay: %dms (0x%02x%02x)\n",
2053 raw_data[1] | (raw_data[2] << 8),
2054 raw_data[2], raw_data[1]);
2055 hid_debug_event(hdev, buff);
2056 break;
2057 case REPORT_VERSION:
2058 snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
2059 "REPORT_VERSION", report->id, raw_size-1);
2060 hid_debug_event(hdev, buff);
2061 break;
2062 case REPORT_DEVID:
2063 snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
2064 "REPORT_DEVID", report->id, raw_size-1);
2065 hid_debug_event(hdev, buff);
2066 break;
2067 case REPORT_SPLASH_SIZE:
2068 snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
2069 "REPORT_SPLASH_SIZE", report->id, raw_size-1);
2070 hid_debug_event(hdev, buff);
2071 break;
2072 case REPORT_HOOK_VERSION:
2073 snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
2074 "REPORT_HOOK_VERSION", report->id, raw_size-1);
2075 hid_debug_event(hdev, buff);
2076 break;
2077 case REPORT_EXIT_FLASHER:
2078 snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
2079 "REPORT_VERSION", report->id, raw_size-1);
2080 hid_debug_event(hdev, buff);
2081 snprintf(buff, BUFF_SZ, "\tRestart delay: %dms (0x%02x%02x)\n",
2082 raw_data[1] | (raw_data[2] << 8),
2083 raw_data[2], raw_data[1]);
2084 hid_debug_event(hdev, buff);
2085 break;
2086 default:
2087 snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
2088 "<unknown>", report->id, raw_size-1);
2089 hid_debug_event(hdev, buff);
2090 break;
2091 }
2092 wake_up_interruptible(&hdev->debug_wait);
2093 kfree(buff);
2094 }
2095
picolcd_debug_raw_event(struct picolcd_data * data,struct hid_device * hdev,struct hid_report * report,u8 * raw_data,int size)2096 static void picolcd_debug_raw_event(struct picolcd_data *data,
2097 struct hid_device *hdev, struct hid_report *report,
2098 u8 *raw_data, int size)
2099 {
2100 char *buff;
2101
2102 #define BUFF_SZ 256
2103 /* Avoid unnecessary overhead if debugfs is disabled */
2104 if (!hdev->debug_events)
2105 return;
2106
2107 buff = kmalloc(BUFF_SZ, GFP_ATOMIC);
2108 if (!buff)
2109 return;
2110
2111 switch (report->id) {
2112 case REPORT_ERROR_CODE:
2113 /* 2 data bytes with affected report and error code */
2114 snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
2115 "REPORT_ERROR_CODE", report->id, size-1);
2116 hid_debug_event(hdev, buff);
2117 if (raw_data[2] < ARRAY_SIZE(error_codes))
2118 snprintf(buff, BUFF_SZ, "\tError code 0x%02x (%s) in reply to report 0x%02x\n",
2119 raw_data[2], error_codes[raw_data[2]], raw_data[1]);
2120 else
2121 snprintf(buff, BUFF_SZ, "\tError code 0x%02x in reply to report 0x%02x\n",
2122 raw_data[2], raw_data[1]);
2123 hid_debug_event(hdev, buff);
2124 break;
2125 case REPORT_KEY_STATE:
2126 /* 2 data bytes with key state */
2127 snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
2128 "REPORT_KEY_STATE", report->id, size-1);
2129 hid_debug_event(hdev, buff);
2130 if (raw_data[1] == 0)
2131 snprintf(buff, BUFF_SZ, "\tNo key pressed\n");
2132 else if (raw_data[2] == 0)
2133 snprintf(buff, BUFF_SZ, "\tOne key pressed: 0x%02x (%d)\n",
2134 raw_data[1], raw_data[1]);
2135 else
2136 snprintf(buff, BUFF_SZ, "\tTwo keys pressed: 0x%02x (%d), 0x%02x (%d)\n",
2137 raw_data[1], raw_data[1], raw_data[2], raw_data[2]);
2138 hid_debug_event(hdev, buff);
2139 break;
2140 case REPORT_IR_DATA:
2141 /* Up to 20 byes of IR scancode data */
2142 snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
2143 "REPORT_IR_DATA", report->id, size-1);
2144 hid_debug_event(hdev, buff);
2145 if (raw_data[1] == 0) {
2146 snprintf(buff, BUFF_SZ, "\tUnexpectedly 0 data length\n");
2147 hid_debug_event(hdev, buff);
2148 } else if (raw_data[1] + 1 <= size) {
2149 snprintf(buff, BUFF_SZ, "\tData length: %d\n\tIR Data: ",
2150 raw_data[1]-1);
2151 hid_debug_event(hdev, buff);
2152 dump_buff_as_hex(buff, BUFF_SZ, raw_data+2, raw_data[1]-1);
2153 hid_debug_event(hdev, buff);
2154 } else {
2155 snprintf(buff, BUFF_SZ, "\tOverflowing data length: %d\n",
2156 raw_data[1]-1);
2157 hid_debug_event(hdev, buff);
2158 }
2159 break;
2160 case REPORT_EE_DATA:
2161 /* Data buffer in response to REPORT_EE_READ or REPORT_EE_WRITE */
2162 snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
2163 "REPORT_EE_DATA", report->id, size-1);
2164 hid_debug_event(hdev, buff);
2165 snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n",
2166 raw_data[2], raw_data[1]);
2167 hid_debug_event(hdev, buff);
2168 snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]);
2169 hid_debug_event(hdev, buff);
2170 if (raw_data[3] == 0) {
2171 snprintf(buff, BUFF_SZ, "\tNo data\n");
2172 hid_debug_event(hdev, buff);
2173 } else if (raw_data[3] + 4 <= size) {
2174 snprintf(buff, BUFF_SZ, "\tData: ");
2175 hid_debug_event(hdev, buff);
2176 dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]);
2177 hid_debug_event(hdev, buff);
2178 } else {
2179 snprintf(buff, BUFF_SZ, "\tData overflowed\n");
2180 hid_debug_event(hdev, buff);
2181 }
2182 break;
2183 case REPORT_MEMORY:
2184 /* Data buffer in response to REPORT_READ_MEMORY or REPORT_WRTIE_MEMORY */
2185 snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
2186 "REPORT_MEMORY", report->id, size-1);
2187 hid_debug_event(hdev, buff);
2188 switch (data->addr_sz) {
2189 case 2:
2190 snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n",
2191 raw_data[2], raw_data[1]);
2192 hid_debug_event(hdev, buff);
2193 snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]);
2194 hid_debug_event(hdev, buff);
2195 if (raw_data[3] == 0) {
2196 snprintf(buff, BUFF_SZ, "\tNo data\n");
2197 } else if (raw_data[3] + 4 <= size) {
2198 snprintf(buff, BUFF_SZ, "\tData: ");
2199 hid_debug_event(hdev, buff);
2200 dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]);
2201 } else {
2202 snprintf(buff, BUFF_SZ, "\tData overflowed\n");
2203 }
2204 break;
2205 case 3:
2206 snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n",
2207 raw_data[3], raw_data[2], raw_data[1]);
2208 hid_debug_event(hdev, buff);
2209 snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]);
2210 hid_debug_event(hdev, buff);
2211 if (raw_data[4] == 0) {
2212 snprintf(buff, BUFF_SZ, "\tNo data\n");
2213 } else if (raw_data[4] + 5 <= size) {
2214 snprintf(buff, BUFF_SZ, "\tData: ");
2215 hid_debug_event(hdev, buff);
2216 dump_buff_as_hex(buff, BUFF_SZ, raw_data+5, raw_data[4]);
2217 } else {
2218 snprintf(buff, BUFF_SZ, "\tData overflowed\n");
2219 }
2220 break;
2221 default:
2222 snprintf(buff, BUFF_SZ, "\tNot supported\n");
2223 }
2224 hid_debug_event(hdev, buff);
2225 break;
2226 case REPORT_VERSION:
2227 snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
2228 "REPORT_VERSION", report->id, size-1);
2229 hid_debug_event(hdev, buff);
2230 snprintf(buff, BUFF_SZ, "\tFirmware version: %d.%d\n",
2231 raw_data[2], raw_data[1]);
2232 hid_debug_event(hdev, buff);
2233 break;
2234 case REPORT_BL_ERASE_MEMORY:
2235 snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
2236 "REPORT_BL_ERASE_MEMORY", report->id, size-1);
2237 hid_debug_event(hdev, buff);
2238 /* TODO */
2239 break;
2240 case REPORT_BL_READ_MEMORY:
2241 snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
2242 "REPORT_BL_READ_MEMORY", report->id, size-1);
2243 hid_debug_event(hdev, buff);
2244 /* TODO */
2245 break;
2246 case REPORT_BL_WRITE_MEMORY:
2247 snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
2248 "REPORT_BL_WRITE_MEMORY", report->id, size-1);
2249 hid_debug_event(hdev, buff);
2250 /* TODO */
2251 break;
2252 case REPORT_DEVID:
2253 snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
2254 "REPORT_DEVID", report->id, size-1);
2255 hid_debug_event(hdev, buff);
2256 snprintf(buff, BUFF_SZ, "\tSerial: 0x%02x%02x%02x%02x\n",
2257 raw_data[1], raw_data[2], raw_data[3], raw_data[4]);
2258 hid_debug_event(hdev, buff);
2259 snprintf(buff, BUFF_SZ, "\tType: 0x%02x\n",
2260 raw_data[5]);
2261 hid_debug_event(hdev, buff);
2262 break;
2263 case REPORT_SPLASH_SIZE:
2264 snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
2265 "REPORT_SPLASH_SIZE", report->id, size-1);
2266 hid_debug_event(hdev, buff);
2267 snprintf(buff, BUFF_SZ, "\tTotal splash space: %d\n",
2268 (raw_data[2] << 8) | raw_data[1]);
2269 hid_debug_event(hdev, buff);
2270 snprintf(buff, BUFF_SZ, "\tUsed splash space: %d\n",
2271 (raw_data[4] << 8) | raw_data[3]);
2272 hid_debug_event(hdev, buff);
2273 break;
2274 case REPORT_HOOK_VERSION:
2275 snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
2276 "REPORT_HOOK_VERSION", report->id, size-1);
2277 hid_debug_event(hdev, buff);
2278 snprintf(buff, BUFF_SZ, "\tFirmware version: %d.%d\n",
2279 raw_data[1], raw_data[2]);
2280 hid_debug_event(hdev, buff);
2281 break;
2282 default:
2283 snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
2284 "<unknown>", report->id, size-1);
2285 hid_debug_event(hdev, buff);
2286 break;
2287 }
2288 wake_up_interruptible(&hdev->debug_wait);
2289 kfree(buff);
2290 }
2291
picolcd_init_devfs(struct picolcd_data * data,struct hid_report * eeprom_r,struct hid_report * eeprom_w,struct hid_report * flash_r,struct hid_report * flash_w,struct hid_report * reset)2292 static void picolcd_init_devfs(struct picolcd_data *data,
2293 struct hid_report *eeprom_r, struct hid_report *eeprom_w,
2294 struct hid_report *flash_r, struct hid_report *flash_w,
2295 struct hid_report *reset)
2296 {
2297 struct hid_device *hdev = data->hdev;
2298
2299 mutex_init(&data->mutex_flash);
2300
2301 /* reset */
2302 if (reset)
2303 data->debug_reset = debugfs_create_file("reset", 0600,
2304 hdev->debug_dir, data, &picolcd_debug_reset_fops);
2305
2306 /* eeprom */
2307 if (eeprom_r || eeprom_w)
2308 data->debug_eeprom = debugfs_create_file("eeprom",
2309 (eeprom_w ? S_IWUSR : 0) | (eeprom_r ? S_IRUSR : 0),
2310 hdev->debug_dir, data, &picolcd_debug_eeprom_fops);
2311
2312 /* flash */
2313 if (flash_r && flash_r->maxfield == 1 && flash_r->field[0]->report_size == 8)
2314 data->addr_sz = flash_r->field[0]->report_count - 1;
2315 else
2316 data->addr_sz = -1;
2317 if (data->addr_sz == 2 || data->addr_sz == 3) {
2318 data->debug_flash = debugfs_create_file("flash",
2319 (flash_w ? S_IWUSR : 0) | (flash_r ? S_IRUSR : 0),
2320 hdev->debug_dir, data, &picolcd_debug_flash_fops);
2321 } else if (flash_r || flash_w)
2322 hid_warn(hdev, "Unexpected FLASH access reports, please submit rdesc for review\n");
2323 }
2324
picolcd_exit_devfs(struct picolcd_data * data)2325 static void picolcd_exit_devfs(struct picolcd_data *data)
2326 {
2327 struct dentry *dent;
2328
2329 dent = data->debug_reset;
2330 data->debug_reset = NULL;
2331 if (dent)
2332 debugfs_remove(dent);
2333 dent = data->debug_eeprom;
2334 data->debug_eeprom = NULL;
2335 if (dent)
2336 debugfs_remove(dent);
2337 dent = data->debug_flash;
2338 data->debug_flash = NULL;
2339 if (dent)
2340 debugfs_remove(dent);
2341 mutex_destroy(&data->mutex_flash);
2342 }
2343 #else
picolcd_debug_raw_event(struct picolcd_data * data,struct hid_device * hdev,struct hid_report * report,u8 * raw_data,int size)2344 static inline void picolcd_debug_raw_event(struct picolcd_data *data,
2345 struct hid_device *hdev, struct hid_report *report,
2346 u8 *raw_data, int size)
2347 {
2348 }
picolcd_init_devfs(struct picolcd_data * data,struct hid_report * eeprom_r,struct hid_report * eeprom_w,struct hid_report * flash_r,struct hid_report * flash_w,struct hid_report * reset)2349 static inline void picolcd_init_devfs(struct picolcd_data *data,
2350 struct hid_report *eeprom_r, struct hid_report *eeprom_w,
2351 struct hid_report *flash_r, struct hid_report *flash_w,
2352 struct hid_report *reset)
2353 {
2354 }
picolcd_exit_devfs(struct picolcd_data * data)2355 static inline void picolcd_exit_devfs(struct picolcd_data *data)
2356 {
2357 }
2358 #endif /* CONFIG_DEBUG_FS */
2359
2360 /*
2361 * Handle raw report as sent by device
2362 */
picolcd_raw_event(struct hid_device * hdev,struct hid_report * report,u8 * raw_data,int size)2363 static int picolcd_raw_event(struct hid_device *hdev,
2364 struct hid_report *report, u8 *raw_data, int size)
2365 {
2366 struct picolcd_data *data = hid_get_drvdata(hdev);
2367 unsigned long flags;
2368 int ret = 0;
2369
2370 if (!data)
2371 return 1;
2372
2373 if (report->id == REPORT_KEY_STATE) {
2374 if (data->input_keys)
2375 ret = picolcd_raw_keypad(data, report, raw_data+1, size-1);
2376 } else if (report->id == REPORT_IR_DATA) {
2377 if (data->input_cir)
2378 ret = picolcd_raw_cir(data, report, raw_data+1, size-1);
2379 } else {
2380 spin_lock_irqsave(&data->lock, flags);
2381 /*
2382 * We let the caller of picolcd_send_and_wait() check if the
2383 * report we got is one of the expected ones or not.
2384 */
2385 if (data->pending) {
2386 memcpy(data->pending->raw_data, raw_data+1, size-1);
2387 data->pending->raw_size = size-1;
2388 data->pending->in_report = report;
2389 complete(&data->pending->ready);
2390 }
2391 spin_unlock_irqrestore(&data->lock, flags);
2392 }
2393
2394 picolcd_debug_raw_event(data, hdev, report, raw_data, size);
2395 return 1;
2396 }
2397
2398 #ifdef CONFIG_PM
picolcd_suspend(struct hid_device * hdev,pm_message_t message)2399 static int picolcd_suspend(struct hid_device *hdev, pm_message_t message)
2400 {
2401 if (PMSG_IS_AUTO(message))
2402 return 0;
2403
2404 picolcd_suspend_backlight(hid_get_drvdata(hdev));
2405 dbg_hid(PICOLCD_NAME " device ready for suspend\n");
2406 return 0;
2407 }
2408
picolcd_resume(struct hid_device * hdev)2409 static int picolcd_resume(struct hid_device *hdev)
2410 {
2411 int ret;
2412 ret = picolcd_resume_backlight(hid_get_drvdata(hdev));
2413 if (ret)
2414 dbg_hid(PICOLCD_NAME " restoring backlight failed: %d\n", ret);
2415 return 0;
2416 }
2417
picolcd_reset_resume(struct hid_device * hdev)2418 static int picolcd_reset_resume(struct hid_device *hdev)
2419 {
2420 int ret;
2421 ret = picolcd_reset(hdev);
2422 if (ret)
2423 dbg_hid(PICOLCD_NAME " resetting our device failed: %d\n", ret);
2424 ret = picolcd_fb_reset(hid_get_drvdata(hdev), 0);
2425 if (ret)
2426 dbg_hid(PICOLCD_NAME " restoring framebuffer content failed: %d\n", ret);
2427 ret = picolcd_resume_lcd(hid_get_drvdata(hdev));
2428 if (ret)
2429 dbg_hid(PICOLCD_NAME " restoring lcd failed: %d\n", ret);
2430 ret = picolcd_resume_backlight(hid_get_drvdata(hdev));
2431 if (ret)
2432 dbg_hid(PICOLCD_NAME " restoring backlight failed: %d\n", ret);
2433 picolcd_leds_set(hid_get_drvdata(hdev));
2434 return 0;
2435 }
2436 #endif
2437
2438 /* initialize keypad input device */
picolcd_init_keys(struct picolcd_data * data,struct hid_report * report)2439 static int picolcd_init_keys(struct picolcd_data *data,
2440 struct hid_report *report)
2441 {
2442 struct hid_device *hdev = data->hdev;
2443 struct input_dev *idev;
2444 int error, i;
2445
2446 if (!report)
2447 return -ENODEV;
2448 if (report->maxfield != 1 || report->field[0]->report_count != 2 ||
2449 report->field[0]->report_size != 8) {
2450 hid_err(hdev, "unsupported KEY_STATE report\n");
2451 return -EINVAL;
2452 }
2453
2454 idev = input_allocate_device();
2455 if (idev == NULL) {
2456 hid_err(hdev, "failed to allocate input device\n");
2457 return -ENOMEM;
2458 }
2459 input_set_drvdata(idev, hdev);
2460 memcpy(data->keycode, def_keymap, sizeof(def_keymap));
2461 idev->name = hdev->name;
2462 idev->phys = hdev->phys;
2463 idev->uniq = hdev->uniq;
2464 idev->id.bustype = hdev->bus;
2465 idev->id.vendor = hdev->vendor;
2466 idev->id.product = hdev->product;
2467 idev->id.version = hdev->version;
2468 idev->dev.parent = hdev->dev.parent;
2469 idev->keycode = &data->keycode;
2470 idev->keycodemax = PICOLCD_KEYS;
2471 idev->keycodesize = sizeof(data->keycode[0]);
2472 input_set_capability(idev, EV_MSC, MSC_SCAN);
2473 set_bit(EV_REP, idev->evbit);
2474 for (i = 0; i < PICOLCD_KEYS; i++)
2475 input_set_capability(idev, EV_KEY, data->keycode[i]);
2476 error = input_register_device(idev);
2477 if (error) {
2478 hid_err(hdev, "error registering the input device\n");
2479 input_free_device(idev);
2480 return error;
2481 }
2482 data->input_keys = idev;
2483 return 0;
2484 }
2485
picolcd_exit_keys(struct picolcd_data * data)2486 static void picolcd_exit_keys(struct picolcd_data *data)
2487 {
2488 struct input_dev *idev = data->input_keys;
2489
2490 data->input_keys = NULL;
2491 if (idev)
2492 input_unregister_device(idev);
2493 }
2494
2495 /* initialize CIR input device */
picolcd_init_cir(struct picolcd_data * data,struct hid_report * report)2496 static inline int picolcd_init_cir(struct picolcd_data *data, struct hid_report *report)
2497 {
2498 /* support not implemented yet */
2499 return 0;
2500 }
2501
picolcd_exit_cir(struct picolcd_data * data)2502 static inline void picolcd_exit_cir(struct picolcd_data *data)
2503 {
2504 }
2505
picolcd_probe_lcd(struct hid_device * hdev,struct picolcd_data * data)2506 static int picolcd_probe_lcd(struct hid_device *hdev, struct picolcd_data *data)
2507 {
2508 int error;
2509
2510 error = picolcd_check_version(hdev);
2511 if (error)
2512 return error;
2513
2514 if (data->version[0] != 0 && data->version[1] != 3)
2515 hid_info(hdev, "Device with untested firmware revision, please submit /sys/kernel/debug/hid/%s/rdesc for this device.\n",
2516 dev_name(&hdev->dev));
2517
2518 /* Setup keypad input device */
2519 error = picolcd_init_keys(data, picolcd_in_report(REPORT_KEY_STATE, hdev));
2520 if (error)
2521 goto err;
2522
2523 /* Setup CIR input device */
2524 error = picolcd_init_cir(data, picolcd_in_report(REPORT_IR_DATA, hdev));
2525 if (error)
2526 goto err;
2527
2528 /* Set up the framebuffer device */
2529 error = picolcd_init_framebuffer(data);
2530 if (error)
2531 goto err;
2532
2533 /* Setup lcd class device */
2534 error = picolcd_init_lcd(data, picolcd_out_report(REPORT_CONTRAST, hdev));
2535 if (error)
2536 goto err;
2537
2538 /* Setup backlight class device */
2539 error = picolcd_init_backlight(data, picolcd_out_report(REPORT_BRIGHTNESS, hdev));
2540 if (error)
2541 goto err;
2542
2543 /* Setup the LED class devices */
2544 error = picolcd_init_leds(data, picolcd_out_report(REPORT_LED_STATE, hdev));
2545 if (error)
2546 goto err;
2547
2548 picolcd_init_devfs(data, picolcd_out_report(REPORT_EE_READ, hdev),
2549 picolcd_out_report(REPORT_EE_WRITE, hdev),
2550 picolcd_out_report(REPORT_READ_MEMORY, hdev),
2551 picolcd_out_report(REPORT_WRITE_MEMORY, hdev),
2552 picolcd_out_report(REPORT_RESET, hdev));
2553 return 0;
2554 err:
2555 picolcd_exit_leds(data);
2556 picolcd_exit_backlight(data);
2557 picolcd_exit_lcd(data);
2558 picolcd_exit_framebuffer(data);
2559 picolcd_exit_cir(data);
2560 picolcd_exit_keys(data);
2561 return error;
2562 }
2563
picolcd_probe_bootloader(struct hid_device * hdev,struct picolcd_data * data)2564 static int picolcd_probe_bootloader(struct hid_device *hdev, struct picolcd_data *data)
2565 {
2566 int error;
2567
2568 error = picolcd_check_version(hdev);
2569 if (error)
2570 return error;
2571
2572 if (data->version[0] != 1 && data->version[1] != 0)
2573 hid_info(hdev, "Device with untested bootloader revision, please submit /sys/kernel/debug/hid/%s/rdesc for this device.\n",
2574 dev_name(&hdev->dev));
2575
2576 picolcd_init_devfs(data, NULL, NULL,
2577 picolcd_out_report(REPORT_BL_READ_MEMORY, hdev),
2578 picolcd_out_report(REPORT_BL_WRITE_MEMORY, hdev), NULL);
2579 return 0;
2580 }
2581
picolcd_probe(struct hid_device * hdev,const struct hid_device_id * id)2582 static int picolcd_probe(struct hid_device *hdev,
2583 const struct hid_device_id *id)
2584 {
2585 struct picolcd_data *data;
2586 int error = -ENOMEM;
2587
2588 dbg_hid(PICOLCD_NAME " hardware probe...\n");
2589
2590 /*
2591 * Let's allocate the picolcd data structure, set some reasonable
2592 * defaults, and associate it with the device
2593 */
2594 data = kzalloc(sizeof(struct picolcd_data), GFP_KERNEL);
2595 if (data == NULL) {
2596 hid_err(hdev, "can't allocate space for Minibox PicoLCD device data\n");
2597 error = -ENOMEM;
2598 goto err_no_cleanup;
2599 }
2600
2601 spin_lock_init(&data->lock);
2602 mutex_init(&data->mutex);
2603 data->hdev = hdev;
2604 data->opmode_delay = 5000;
2605 if (hdev->product == USB_DEVICE_ID_PICOLCD_BOOTLOADER)
2606 data->status |= PICOLCD_BOOTLOADER;
2607 hid_set_drvdata(hdev, data);
2608
2609 /* Parse the device reports and start it up */
2610 error = hid_parse(hdev);
2611 if (error) {
2612 hid_err(hdev, "device report parse failed\n");
2613 goto err_cleanup_data;
2614 }
2615
2616 /* We don't use hidinput but hid_hw_start() fails if nothing is
2617 * claimed. So spoof claimed input. */
2618 hdev->claimed = HID_CLAIMED_INPUT;
2619 error = hid_hw_start(hdev, 0);
2620 hdev->claimed = 0;
2621 if (error) {
2622 hid_err(hdev, "hardware start failed\n");
2623 goto err_cleanup_data;
2624 }
2625
2626 error = hid_hw_open(hdev);
2627 if (error) {
2628 hid_err(hdev, "failed to open input interrupt pipe for key and IR events\n");
2629 goto err_cleanup_hid_hw;
2630 }
2631
2632 error = device_create_file(&hdev->dev, &dev_attr_operation_mode_delay);
2633 if (error) {
2634 hid_err(hdev, "failed to create sysfs attributes\n");
2635 goto err_cleanup_hid_ll;
2636 }
2637
2638 error = device_create_file(&hdev->dev, &dev_attr_operation_mode);
2639 if (error) {
2640 hid_err(hdev, "failed to create sysfs attributes\n");
2641 goto err_cleanup_sysfs1;
2642 }
2643
2644 if (data->status & PICOLCD_BOOTLOADER)
2645 error = picolcd_probe_bootloader(hdev, data);
2646 else
2647 error = picolcd_probe_lcd(hdev, data);
2648 if (error)
2649 goto err_cleanup_sysfs2;
2650
2651 dbg_hid(PICOLCD_NAME " activated and initialized\n");
2652 return 0;
2653
2654 err_cleanup_sysfs2:
2655 device_remove_file(&hdev->dev, &dev_attr_operation_mode);
2656 err_cleanup_sysfs1:
2657 device_remove_file(&hdev->dev, &dev_attr_operation_mode_delay);
2658 err_cleanup_hid_ll:
2659 hid_hw_close(hdev);
2660 err_cleanup_hid_hw:
2661 hid_hw_stop(hdev);
2662 err_cleanup_data:
2663 kfree(data);
2664 err_no_cleanup:
2665 hid_set_drvdata(hdev, NULL);
2666
2667 return error;
2668 }
2669
picolcd_remove(struct hid_device * hdev)2670 static void picolcd_remove(struct hid_device *hdev)
2671 {
2672 struct picolcd_data *data = hid_get_drvdata(hdev);
2673 unsigned long flags;
2674
2675 dbg_hid(PICOLCD_NAME " hardware remove...\n");
2676 spin_lock_irqsave(&data->lock, flags);
2677 data->status |= PICOLCD_FAILED;
2678 spin_unlock_irqrestore(&data->lock, flags);
2679 #ifdef CONFIG_HID_PICOLCD_FB
2680 /* short-circuit FB as early as possible in order to
2681 * avoid long delays if we host console.
2682 */
2683 if (data->fb_info)
2684 data->fb_info->par = NULL;
2685 #endif
2686
2687 picolcd_exit_devfs(data);
2688 device_remove_file(&hdev->dev, &dev_attr_operation_mode);
2689 device_remove_file(&hdev->dev, &dev_attr_operation_mode_delay);
2690 hid_hw_close(hdev);
2691 hid_hw_stop(hdev);
2692 hid_set_drvdata(hdev, NULL);
2693
2694 /* Shortcut potential pending reply that will never arrive */
2695 spin_lock_irqsave(&data->lock, flags);
2696 if (data->pending)
2697 complete(&data->pending->ready);
2698 spin_unlock_irqrestore(&data->lock, flags);
2699
2700 /* Cleanup LED */
2701 picolcd_exit_leds(data);
2702 /* Clean up the framebuffer */
2703 picolcd_exit_backlight(data);
2704 picolcd_exit_lcd(data);
2705 picolcd_exit_framebuffer(data);
2706 /* Cleanup input */
2707 picolcd_exit_cir(data);
2708 picolcd_exit_keys(data);
2709
2710 mutex_destroy(&data->mutex);
2711 /* Finally, clean up the picolcd data itself */
2712 kfree(data);
2713 }
2714
2715 static const struct hid_device_id picolcd_devices[] = {
2716 { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD) },
2717 { HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) },
2718 { }
2719 };
2720 MODULE_DEVICE_TABLE(hid, picolcd_devices);
2721
2722 static struct hid_driver picolcd_driver = {
2723 .name = "hid-picolcd",
2724 .id_table = picolcd_devices,
2725 .probe = picolcd_probe,
2726 .remove = picolcd_remove,
2727 .raw_event = picolcd_raw_event,
2728 #ifdef CONFIG_PM
2729 .suspend = picolcd_suspend,
2730 .resume = picolcd_resume,
2731 .reset_resume = picolcd_reset_resume,
2732 #endif
2733 };
2734
picolcd_init(void)2735 static int __init picolcd_init(void)
2736 {
2737 return hid_register_driver(&picolcd_driver);
2738 }
2739
picolcd_exit(void)2740 static void __exit picolcd_exit(void)
2741 {
2742 hid_unregister_driver(&picolcd_driver);
2743 #ifdef CONFIG_HID_PICOLCD_FB
2744 flush_work_sync(&picolcd_fb_cleanup);
2745 WARN_ON(fb_pending);
2746 #endif
2747 }
2748
2749 module_init(picolcd_init);
2750 module_exit(picolcd_exit);
2751 MODULE_DESCRIPTION("Minibox graphics PicoLCD Driver");
2752 MODULE_LICENSE("GPL v2");
2753