1 /* $Id: bkm_a8.c,v 1.22.2.4 2004/01/15 14:02:34 keil Exp $
2 *
3 * low level stuff for Scitel Quadro (4*S0, passive)
4 *
5 * Author Roland Klabunde
6 * Copyright by Roland Klabunde <R.Klabunde@Berkom.de>
7 *
8 * This software may be used and distributed according to the terms
9 * of the GNU General Public License, incorporated herein by reference.
10 *
11 */
12
13
14 #include <linux/init.h>
15 #include "hisax.h"
16 #include "isac.h"
17 #include "ipac.h"
18 #include "hscx.h"
19 #include "isdnl1.h"
20 #include <linux/pci.h>
21 #include "bkm_ax.h"
22
23 #define ATTEMPT_PCI_REMAPPING /* Required for PLX rev 1 */
24
25 static const char sct_quadro_revision[] = "$Revision: 1.22.2.4 $";
26
27 static const char *sct_quadro_subtypes[] =
28 {
29 "",
30 "#1",
31 "#2",
32 "#3",
33 "#4"
34 };
35
36
37 #define wordout(addr, val) outw(val, addr)
38 #define wordin(addr) inw(addr)
39
40 static inline u_char
readreg(unsigned int ale,unsigned int adr,u_char off)41 readreg(unsigned int ale, unsigned int adr, u_char off)
42 {
43 register u_char ret;
44 wordout(ale, off);
45 ret = wordin(adr) & 0xFF;
46 return (ret);
47 }
48
49 static inline void
readfifo(unsigned int ale,unsigned int adr,u_char off,u_char * data,int size)50 readfifo(unsigned int ale, unsigned int adr, u_char off, u_char *data, int size)
51 {
52 int i;
53 wordout(ale, off);
54 for (i = 0; i < size; i++)
55 data[i] = wordin(adr) & 0xFF;
56 }
57
58
59 static inline void
writereg(unsigned int ale,unsigned int adr,u_char off,u_char data)60 writereg(unsigned int ale, unsigned int adr, u_char off, u_char data)
61 {
62 wordout(ale, off);
63 wordout(adr, data);
64 }
65
66 static inline void
writefifo(unsigned int ale,unsigned int adr,u_char off,u_char * data,int size)67 writefifo(unsigned int ale, unsigned int adr, u_char off, u_char *data, int size)
68 {
69 int i;
70 wordout(ale, off);
71 for (i = 0; i < size; i++)
72 wordout(adr, data[i]);
73 }
74
75 /* Interface functions */
76
77 static u_char
ReadISAC(struct IsdnCardState * cs,u_char offset)78 ReadISAC(struct IsdnCardState *cs, u_char offset)
79 {
80 return (readreg(cs->hw.ax.base, cs->hw.ax.data_adr, offset | 0x80));
81 }
82
83 static void
WriteISAC(struct IsdnCardState * cs,u_char offset,u_char value)84 WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value)
85 {
86 writereg(cs->hw.ax.base, cs->hw.ax.data_adr, offset | 0x80, value);
87 }
88
89 static void
ReadISACfifo(struct IsdnCardState * cs,u_char * data,int size)90 ReadISACfifo(struct IsdnCardState *cs, u_char *data, int size)
91 {
92 readfifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size);
93 }
94
95 static void
WriteISACfifo(struct IsdnCardState * cs,u_char * data,int size)96 WriteISACfifo(struct IsdnCardState *cs, u_char *data, int size)
97 {
98 writefifo(cs->hw.ax.base, cs->hw.ax.data_adr, 0x80, data, size);
99 }
100
101
102 static u_char
ReadHSCX(struct IsdnCardState * cs,int hscx,u_char offset)103 ReadHSCX(struct IsdnCardState *cs, int hscx, u_char offset)
104 {
105 return (readreg(cs->hw.ax.base, cs->hw.ax.data_adr, offset + (hscx ? 0x40 : 0)));
106 }
107
108 static void
WriteHSCX(struct IsdnCardState * cs,int hscx,u_char offset,u_char value)109 WriteHSCX(struct IsdnCardState *cs, int hscx, u_char offset, u_char value)
110 {
111 writereg(cs->hw.ax.base, cs->hw.ax.data_adr, offset + (hscx ? 0x40 : 0), value);
112 }
113
114 /* Set the specific ipac to active */
115 static void
set_ipac_active(struct IsdnCardState * cs,u_int active)116 set_ipac_active(struct IsdnCardState *cs, u_int active)
117 {
118 /* set irq mask */
119 writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK,
120 active ? 0xc0 : 0xff);
121 }
122
123 /*
124 * fast interrupt HSCX stuff goes here
125 */
126
127 #define READHSCX(cs, nr, reg) readreg(cs->hw.ax.base, \
128 cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0))
129 #define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.ax.base, \
130 cs->hw.ax.data_adr, reg + (nr ? 0x40 : 0), data)
131 #define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.ax.base, \
132 cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
133 #define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.ax.base, \
134 cs->hw.ax.data_adr, (nr ? 0x40 : 0), ptr, cnt)
135
136 #include "hscx_irq.c"
137
138 static irqreturn_t
bkm_interrupt_ipac(int intno,void * dev_id)139 bkm_interrupt_ipac(int intno, void *dev_id)
140 {
141 struct IsdnCardState *cs = dev_id;
142 u_char ista, val, icnt = 5;
143 u_long flags;
144
145 spin_lock_irqsave(&cs->lock, flags);
146 ista = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ISTA);
147 if (!(ista & 0x3f)) { /* not this IPAC */
148 spin_unlock_irqrestore(&cs->lock, flags);
149 return IRQ_NONE;
150 }
151 Start_IPAC:
152 if (cs->debug & L1_DEB_IPAC)
153 debugl1(cs, "IPAC ISTA %02X", ista);
154 if (ista & 0x0f) {
155 val = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, HSCX_ISTA + 0x40);
156 if (ista & 0x01)
157 val |= 0x01;
158 if (ista & 0x04)
159 val |= 0x02;
160 if (ista & 0x08)
161 val |= 0x04;
162 if (val) {
163 hscx_int_main(cs, val);
164 }
165 }
166 if (ista & 0x20) {
167 val = 0xfe & readreg(cs->hw.ax.base, cs->hw.ax.data_adr, ISAC_ISTA | 0x80);
168 if (val) {
169 isac_interrupt(cs, val);
170 }
171 }
172 if (ista & 0x10) {
173 val = 0x01;
174 isac_interrupt(cs, val);
175 }
176 ista = readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ISTA);
177 if ((ista & 0x3f) && icnt) {
178 icnt--;
179 goto Start_IPAC;
180 }
181 if (!icnt)
182 printk(KERN_WARNING "HiSax: Scitel Quadro (%s) IRQ LOOP\n",
183 sct_quadro_subtypes[cs->subtyp]);
184 writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xFF);
185 writereg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_MASK, 0xC0);
186 spin_unlock_irqrestore(&cs->lock, flags);
187 return IRQ_HANDLED;
188 }
189
190 static void
release_io_sct_quadro(struct IsdnCardState * cs)191 release_io_sct_quadro(struct IsdnCardState *cs)
192 {
193 release_region(cs->hw.ax.base & 0xffffffc0, 128);
194 if (cs->subtyp == SCT_1)
195 release_region(cs->hw.ax.plx_adr, 64);
196 }
197
198 static void
enable_bkm_int(struct IsdnCardState * cs,unsigned bEnable)199 enable_bkm_int(struct IsdnCardState *cs, unsigned bEnable)
200 {
201 if (cs->typ == ISDN_CTYPE_SCT_QUADRO) {
202 if (bEnable)
203 wordout(cs->hw.ax.plx_adr + 0x4C, (wordin(cs->hw.ax.plx_adr + 0x4C) | 0x41));
204 else
205 wordout(cs->hw.ax.plx_adr + 0x4C, (wordin(cs->hw.ax.plx_adr + 0x4C) & ~0x41));
206 }
207 }
208
209 static void
reset_bkm(struct IsdnCardState * cs)210 reset_bkm(struct IsdnCardState *cs)
211 {
212 if (cs->subtyp == SCT_1) {
213 wordout(cs->hw.ax.plx_adr + 0x50, (wordin(cs->hw.ax.plx_adr + 0x50) & ~4));
214 mdelay(10);
215 /* Remove the soft reset */
216 wordout(cs->hw.ax.plx_adr + 0x50, (wordin(cs->hw.ax.plx_adr + 0x50) | 4));
217 mdelay(10);
218 }
219 }
220
221 static int
BKM_card_msg(struct IsdnCardState * cs,int mt,void * arg)222 BKM_card_msg(struct IsdnCardState *cs, int mt, void *arg)
223 {
224 u_long flags;
225
226 switch (mt) {
227 case CARD_RESET:
228 spin_lock_irqsave(&cs->lock, flags);
229 /* Disable ints */
230 set_ipac_active(cs, 0);
231 enable_bkm_int(cs, 0);
232 reset_bkm(cs);
233 spin_unlock_irqrestore(&cs->lock, flags);
234 return (0);
235 case CARD_RELEASE:
236 /* Sanity */
237 spin_lock_irqsave(&cs->lock, flags);
238 set_ipac_active(cs, 0);
239 enable_bkm_int(cs, 0);
240 spin_unlock_irqrestore(&cs->lock, flags);
241 release_io_sct_quadro(cs);
242 return (0);
243 case CARD_INIT:
244 spin_lock_irqsave(&cs->lock, flags);
245 cs->debug |= L1_DEB_IPAC;
246 set_ipac_active(cs, 1);
247 inithscxisac(cs, 3);
248 /* Enable ints */
249 enable_bkm_int(cs, 1);
250 spin_unlock_irqrestore(&cs->lock, flags);
251 return (0);
252 case CARD_TEST:
253 return (0);
254 }
255 return (0);
256 }
257
258 static int __devinit
sct_alloc_io(u_int adr,u_int len)259 sct_alloc_io(u_int adr, u_int len)
260 {
261 if (!request_region(adr, len, "scitel")) {
262 printk(KERN_WARNING
263 "HiSax: Scitel port %#x-%#x already in use\n",
264 adr, adr + len);
265 return (1);
266 }
267 return (0);
268 }
269
270 static struct pci_dev *dev_a8 __devinitdata = NULL;
271 static u16 sub_vendor_id __devinitdata = 0;
272 static u16 sub_sys_id __devinitdata = 0;
273 static u_char pci_bus __devinitdata = 0;
274 static u_char pci_device_fn __devinitdata = 0;
275 static u_char pci_irq __devinitdata = 0;
276
277 int __devinit
setup_sct_quadro(struct IsdnCard * card)278 setup_sct_quadro(struct IsdnCard *card)
279 {
280 struct IsdnCardState *cs = card->cs;
281 char tmp[64];
282 u_int found = 0;
283 u_int pci_ioaddr1, pci_ioaddr2, pci_ioaddr3, pci_ioaddr4, pci_ioaddr5;
284
285 strcpy(tmp, sct_quadro_revision);
286 printk(KERN_INFO "HiSax: T-Berkom driver Rev. %s\n", HiSax_getrev(tmp));
287 if (cs->typ == ISDN_CTYPE_SCT_QUADRO) {
288 cs->subtyp = SCT_1; /* Preset */
289 } else
290 return (0);
291
292 /* Identify subtype by para[0] */
293 if (card->para[0] >= SCT_1 && card->para[0] <= SCT_4)
294 cs->subtyp = card->para[0];
295 else {
296 printk(KERN_WARNING "HiSax: Scitel Quadro: Invalid "
297 "subcontroller in configuration, default to 1\n");
298 return (0);
299 }
300 if ((cs->subtyp != SCT_1) && ((sub_sys_id != PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) ||
301 (sub_vendor_id != PCI_VENDOR_ID_BERKOM)))
302 return (0);
303 if (cs->subtyp == SCT_1) {
304 while ((dev_a8 = hisax_find_pci_device(PCI_VENDOR_ID_PLX,
305 PCI_DEVICE_ID_PLX_9050, dev_a8))) {
306
307 sub_vendor_id = dev_a8->subsystem_vendor;
308 sub_sys_id = dev_a8->subsystem_device;
309 if ((sub_sys_id == PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO) &&
310 (sub_vendor_id == PCI_VENDOR_ID_BERKOM)) {
311 if (pci_enable_device(dev_a8))
312 return (0);
313 pci_ioaddr1 = pci_resource_start(dev_a8, 1);
314 pci_irq = dev_a8->irq;
315 pci_bus = dev_a8->bus->number;
316 pci_device_fn = dev_a8->devfn;
317 found = 1;
318 break;
319 }
320 }
321 if (!found) {
322 printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
323 "Card not found\n",
324 sct_quadro_subtypes[cs->subtyp]);
325 return (0);
326 }
327 #ifdef ATTEMPT_PCI_REMAPPING
328 /* HACK: PLX revision 1 bug: PLX address bit 7 must not be set */
329 if ((pci_ioaddr1 & 0x80) && (dev_a8->revision == 1)) {
330 printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
331 "PLX rev 1, remapping required!\n",
332 sct_quadro_subtypes[cs->subtyp]);
333 /* Restart PCI negotiation */
334 pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, (u_int)-1);
335 /* Move up by 0x80 byte */
336 pci_ioaddr1 += 0x80;
337 pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
338 pci_write_config_dword(dev_a8, PCI_BASE_ADDRESS_1, pci_ioaddr1);
339 dev_a8->resource[1].start = pci_ioaddr1;
340 }
341 #endif /* End HACK */
342 }
343 if (!pci_irq) { /* IRQ range check ?? */
344 printk(KERN_WARNING "HiSax: Scitel Quadro (%s): No IRQ\n",
345 sct_quadro_subtypes[cs->subtyp]);
346 return (0);
347 }
348 pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_1, &pci_ioaddr1);
349 pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_2, &pci_ioaddr2);
350 pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_3, &pci_ioaddr3);
351 pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_4, &pci_ioaddr4);
352 pci_read_config_dword(dev_a8, PCI_BASE_ADDRESS_5, &pci_ioaddr5);
353 if (!pci_ioaddr1 || !pci_ioaddr2 || !pci_ioaddr3 || !pci_ioaddr4 || !pci_ioaddr5) {
354 printk(KERN_WARNING "HiSax: Scitel Quadro (%s): "
355 "No IO base address(es)\n",
356 sct_quadro_subtypes[cs->subtyp]);
357 return (0);
358 }
359 pci_ioaddr1 &= PCI_BASE_ADDRESS_IO_MASK;
360 pci_ioaddr2 &= PCI_BASE_ADDRESS_IO_MASK;
361 pci_ioaddr3 &= PCI_BASE_ADDRESS_IO_MASK;
362 pci_ioaddr4 &= PCI_BASE_ADDRESS_IO_MASK;
363 pci_ioaddr5 &= PCI_BASE_ADDRESS_IO_MASK;
364 /* Take over */
365 cs->irq = pci_irq;
366 cs->irq_flags |= IRQF_SHARED;
367 /* pci_ioaddr1 is unique to all subdevices */
368 /* pci_ioaddr2 is for the fourth subdevice only */
369 /* pci_ioaddr3 is for the third subdevice only */
370 /* pci_ioaddr4 is for the second subdevice only */
371 /* pci_ioaddr5 is for the first subdevice only */
372 cs->hw.ax.plx_adr = pci_ioaddr1;
373 /* Enter all ipac_base addresses */
374 switch (cs->subtyp) {
375 case 1:
376 cs->hw.ax.base = pci_ioaddr5 + 0x00;
377 if (sct_alloc_io(pci_ioaddr1, 128))
378 return (0);
379 if (sct_alloc_io(pci_ioaddr5, 64))
380 return (0);
381 /* disable all IPAC */
382 writereg(pci_ioaddr5, pci_ioaddr5 + 4,
383 IPAC_MASK, 0xFF);
384 writereg(pci_ioaddr4 + 0x08, pci_ioaddr4 + 0x0c,
385 IPAC_MASK, 0xFF);
386 writereg(pci_ioaddr3 + 0x10, pci_ioaddr3 + 0x14,
387 IPAC_MASK, 0xFF);
388 writereg(pci_ioaddr2 + 0x20, pci_ioaddr2 + 0x24,
389 IPAC_MASK, 0xFF);
390 break;
391 case 2:
392 cs->hw.ax.base = pci_ioaddr4 + 0x08;
393 if (sct_alloc_io(pci_ioaddr4, 64))
394 return (0);
395 break;
396 case 3:
397 cs->hw.ax.base = pci_ioaddr3 + 0x10;
398 if (sct_alloc_io(pci_ioaddr3, 64))
399 return (0);
400 break;
401 case 4:
402 cs->hw.ax.base = pci_ioaddr2 + 0x20;
403 if (sct_alloc_io(pci_ioaddr2, 64))
404 return (0);
405 break;
406 }
407 /* For isac and hscx data path */
408 cs->hw.ax.data_adr = cs->hw.ax.base + 4;
409
410 printk(KERN_INFO "HiSax: Scitel Quadro (%s) configured at "
411 "0x%.4lX, 0x%.4lX, 0x%.4lX and IRQ %d\n",
412 sct_quadro_subtypes[cs->subtyp],
413 cs->hw.ax.plx_adr,
414 cs->hw.ax.base,
415 cs->hw.ax.data_adr,
416 cs->irq);
417
418 test_and_set_bit(HW_IPAC, &cs->HW_Flags);
419
420 cs->readisac = &ReadISAC;
421 cs->writeisac = &WriteISAC;
422 cs->readisacfifo = &ReadISACfifo;
423 cs->writeisacfifo = &WriteISACfifo;
424
425 cs->BC_Read_Reg = &ReadHSCX;
426 cs->BC_Write_Reg = &WriteHSCX;
427 cs->BC_Send_Data = &hscx_fill_fifo;
428 cs->cardmsg = &BKM_card_msg;
429 cs->irq_func = &bkm_interrupt_ipac;
430
431 printk(KERN_INFO "HiSax: Scitel Quadro (%s): IPAC Version %d\n",
432 sct_quadro_subtypes[cs->subtyp],
433 readreg(cs->hw.ax.base, cs->hw.ax.data_adr, IPAC_ID));
434 return (1);
435 }
436