1 /*
2 * budget.c: driver for the SAA7146 based Budget DVB cards
3 *
4 * Compiled from various sources by Michael Hunold <michael@mihu.de>
5 *
6 * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de>
7 *
8 * Copyright (C) 1999-2002 Ralph Metzler
9 * & Marcus Metzler for convergence integrated media GmbH
10 *
11 * 26feb2004 Support for FS Activy Card (Grundig tuner) by
12 * Michael Dreher <michael@5dot1.de>,
13 * Oliver Endriss <o.endriss@gmx.de> and
14 * Andreas 'randy' Weinberger
15 *
16 * This program is free software; you can redistribute it and/or
17 * modify it under the terms of the GNU General Public License
18 * as published by the Free Software Foundation; either version 2
19 * of the License, or (at your option) any later version.
20 *
21 *
22 * This program is distributed in the hope that it will be useful,
23 * but WITHOUT ANY WARRANTY; without even the implied warranty of
24 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
25 * GNU General Public License for more details.
26 *
27 *
28 * You should have received a copy of the GNU General Public License
29 * along with this program; if not, write to the Free Software
30 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
31 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html
32 *
33 *
34 * the project's page is at http://www.linuxtv.org/
35 */
36
37 #include "budget.h"
38 #include "stv0299.h"
39 #include "ves1x93.h"
40 #include "ves1820.h"
41 #include "l64781.h"
42 #include "tda8083.h"
43 #include "s5h1420.h"
44 #include "tda10086.h"
45 #include "tda826x.h"
46 #include "lnbp21.h"
47 #include "bsru6.h"
48 #include "bsbe1.h"
49 #include "tdhd1.h"
50 #include "stv6110x.h"
51 #include "stv090x.h"
52 #include "isl6423.h"
53
54 static int diseqc_method;
55 module_param(diseqc_method, int, 0444);
56 MODULE_PARM_DESC(diseqc_method, "Select DiSEqC method for subsystem id 13c2:1003, 0: default, 1: more reliable (for newer revisions only)");
57
58 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
59
Set22K(struct budget * budget,int state)60 static void Set22K (struct budget *budget, int state)
61 {
62 struct saa7146_dev *dev=budget->dev;
63 dprintk(2, "budget: %p\n", budget);
64 saa7146_setgpio(dev, 3, (state ? SAA7146_GPIO_OUTHI : SAA7146_GPIO_OUTLO));
65 }
66
67 /* Diseqc functions only for TT Budget card */
68 /* taken from the Skyvision DVB driver by
69 Ralph Metzler <rjkm@metzlerbros.de> */
70
DiseqcSendBit(struct budget * budget,int data)71 static void DiseqcSendBit (struct budget *budget, int data)
72 {
73 struct saa7146_dev *dev=budget->dev;
74 dprintk(2, "budget: %p\n", budget);
75
76 saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
77 udelay(data ? 500 : 1000);
78 saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
79 udelay(data ? 1000 : 500);
80 }
81
DiseqcSendByte(struct budget * budget,int data)82 static void DiseqcSendByte (struct budget *budget, int data)
83 {
84 int i, par=1, d;
85
86 dprintk(2, "budget: %p\n", budget);
87
88 for (i=7; i>=0; i--) {
89 d = (data>>i)&1;
90 par ^= d;
91 DiseqcSendBit(budget, d);
92 }
93
94 DiseqcSendBit(budget, par);
95 }
96
SendDiSEqCMsg(struct budget * budget,int len,u8 * msg,unsigned long burst)97 static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long burst)
98 {
99 struct saa7146_dev *dev=budget->dev;
100 int i;
101
102 dprintk(2, "budget: %p\n", budget);
103
104 saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
105 mdelay(16);
106
107 for (i=0; i<len; i++)
108 DiseqcSendByte(budget, msg[i]);
109
110 mdelay(16);
111
112 if (burst!=-1) {
113 if (burst)
114 DiseqcSendByte(budget, 0xff);
115 else {
116 saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI);
117 mdelay(12);
118 udelay(500);
119 saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO);
120 }
121 msleep(20);
122 }
123
124 return 0;
125 }
126
127 /*
128 * Routines for the Fujitsu Siemens Activy budget card
129 * 22 kHz tone and DiSEqC are handled by the frontend.
130 * Voltage must be set here.
131 * GPIO 1: LNBP EN, GPIO 2: LNBP VSEL
132 */
SetVoltage_Activy(struct budget * budget,fe_sec_voltage_t voltage)133 static int SetVoltage_Activy (struct budget *budget, fe_sec_voltage_t voltage)
134 {
135 struct saa7146_dev *dev=budget->dev;
136
137 dprintk(2, "budget: %p\n", budget);
138
139 switch (voltage) {
140 case SEC_VOLTAGE_13:
141 saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI);
142 saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTLO);
143 break;
144 case SEC_VOLTAGE_18:
145 saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI);
146 saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI);
147 break;
148 case SEC_VOLTAGE_OFF:
149 saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTLO);
150 break;
151 default:
152 return -EINVAL;
153 }
154
155 return 0;
156 }
157
siemens_budget_set_voltage(struct dvb_frontend * fe,fe_sec_voltage_t voltage)158 static int siemens_budget_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage)
159 {
160 struct budget* budget = (struct budget*) fe->dvb->priv;
161
162 return SetVoltage_Activy (budget, voltage);
163 }
164
budget_set_tone(struct dvb_frontend * fe,fe_sec_tone_mode_t tone)165 static int budget_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone)
166 {
167 struct budget* budget = (struct budget*) fe->dvb->priv;
168
169 switch (tone) {
170 case SEC_TONE_ON:
171 Set22K (budget, 1);
172 break;
173
174 case SEC_TONE_OFF:
175 Set22K (budget, 0);
176 break;
177
178 default:
179 return -EINVAL;
180 }
181
182 return 0;
183 }
184
budget_diseqc_send_master_cmd(struct dvb_frontend * fe,struct dvb_diseqc_master_cmd * cmd)185 static int budget_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
186 {
187 struct budget* budget = (struct budget*) fe->dvb->priv;
188
189 SendDiSEqCMsg (budget, cmd->msg_len, cmd->msg, 0);
190
191 return 0;
192 }
193
budget_diseqc_send_burst(struct dvb_frontend * fe,fe_sec_mini_cmd_t minicmd)194 static int budget_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
195 {
196 struct budget* budget = (struct budget*) fe->dvb->priv;
197
198 SendDiSEqCMsg (budget, 0, NULL, minicmd);
199
200 return 0;
201 }
202
alps_bsrv2_tuner_set_params(struct dvb_frontend * fe)203 static int alps_bsrv2_tuner_set_params(struct dvb_frontend *fe)
204 {
205 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
206 struct budget* budget = (struct budget*) fe->dvb->priv;
207 u8 pwr = 0;
208 u8 buf[4];
209 struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
210 u32 div = (c->frequency + 479500) / 125;
211
212 if (c->frequency > 2000000)
213 pwr = 3;
214 else if (c->frequency > 1800000)
215 pwr = 2;
216 else if (c->frequency > 1600000)
217 pwr = 1;
218 else if (c->frequency > 1200000)
219 pwr = 0;
220 else if (c->frequency >= 1100000)
221 pwr = 1;
222 else pwr = 2;
223
224 buf[0] = (div >> 8) & 0x7f;
225 buf[1] = div & 0xff;
226 buf[2] = ((div & 0x18000) >> 10) | 0x95;
227 buf[3] = (pwr << 6) | 0x30;
228
229 // NOTE: since we're using a prescaler of 2, we set the
230 // divisor frequency to 62.5kHz and divide by 125 above
231
232 if (fe->ops.i2c_gate_ctrl)
233 fe->ops.i2c_gate_ctrl(fe, 1);
234 if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
235 return 0;
236 }
237
238 static struct ves1x93_config alps_bsrv2_config =
239 {
240 .demod_address = 0x08,
241 .xin = 90100000UL,
242 .invert_pwm = 0,
243 };
244
alps_tdbe2_tuner_set_params(struct dvb_frontend * fe)245 static int alps_tdbe2_tuner_set_params(struct dvb_frontend *fe)
246 {
247 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
248 struct budget* budget = (struct budget*) fe->dvb->priv;
249 u32 div;
250 u8 data[4];
251 struct i2c_msg msg = { .addr = 0x62, .flags = 0, .buf = data, .len = sizeof(data) };
252
253 div = (c->frequency + 35937500 + 31250) / 62500;
254
255 data[0] = (div >> 8) & 0x7f;
256 data[1] = div & 0xff;
257 data[2] = 0x85 | ((div >> 10) & 0x60);
258 data[3] = (c->frequency < 174000000 ? 0x88 : c->frequency < 470000000 ? 0x84 : 0x81);
259
260 if (fe->ops.i2c_gate_ctrl)
261 fe->ops.i2c_gate_ctrl(fe, 1);
262 if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
263 return 0;
264 }
265
266 static struct ves1820_config alps_tdbe2_config = {
267 .demod_address = 0x09,
268 .xin = 57840000UL,
269 .invert = 1,
270 .selagc = VES1820_SELAGC_SIGNAMPERR,
271 };
272
grundig_29504_401_tuner_set_params(struct dvb_frontend * fe)273 static int grundig_29504_401_tuner_set_params(struct dvb_frontend *fe)
274 {
275 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
276 struct budget *budget = fe->dvb->priv;
277 u8 *tuner_addr = fe->tuner_priv;
278 u32 div;
279 u8 cfg, cpump, band_select;
280 u8 data[4];
281 struct i2c_msg msg = { .flags = 0, .buf = data, .len = sizeof(data) };
282
283 if (tuner_addr)
284 msg.addr = *tuner_addr;
285 else
286 msg.addr = 0x61;
287
288 div = (36125000 + c->frequency) / 166666;
289
290 cfg = 0x88;
291
292 if (c->frequency < 175000000)
293 cpump = 2;
294 else if (c->frequency < 390000000)
295 cpump = 1;
296 else if (c->frequency < 470000000)
297 cpump = 2;
298 else if (c->frequency < 750000000)
299 cpump = 1;
300 else
301 cpump = 3;
302
303 if (c->frequency < 175000000)
304 band_select = 0x0e;
305 else if (c->frequency < 470000000)
306 band_select = 0x05;
307 else
308 band_select = 0x03;
309
310 data[0] = (div >> 8) & 0x7f;
311 data[1] = div & 0xff;
312 data[2] = ((div >> 10) & 0x60) | cfg;
313 data[3] = (cpump << 6) | band_select;
314
315 if (fe->ops.i2c_gate_ctrl)
316 fe->ops.i2c_gate_ctrl(fe, 1);
317 if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
318 return 0;
319 }
320
321 static struct l64781_config grundig_29504_401_config = {
322 .demod_address = 0x55,
323 };
324
325 static struct l64781_config grundig_29504_401_config_activy = {
326 .demod_address = 0x54,
327 };
328
329 static u8 tuner_address_grundig_29504_401_activy = 0x60;
330
grundig_29504_451_tuner_set_params(struct dvb_frontend * fe)331 static int grundig_29504_451_tuner_set_params(struct dvb_frontend *fe)
332 {
333 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
334 struct budget* budget = (struct budget*) fe->dvb->priv;
335 u32 div;
336 u8 data[4];
337 struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
338
339 div = c->frequency / 125;
340 data[0] = (div >> 8) & 0x7f;
341 data[1] = div & 0xff;
342 data[2] = 0x8e;
343 data[3] = 0x00;
344
345 if (fe->ops.i2c_gate_ctrl)
346 fe->ops.i2c_gate_ctrl(fe, 1);
347 if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
348 return 0;
349 }
350
351 static struct tda8083_config grundig_29504_451_config = {
352 .demod_address = 0x68,
353 };
354
s5h1420_tuner_set_params(struct dvb_frontend * fe)355 static int s5h1420_tuner_set_params(struct dvb_frontend *fe)
356 {
357 struct dtv_frontend_properties *c = &fe->dtv_property_cache;
358 struct budget* budget = (struct budget*) fe->dvb->priv;
359 u32 div;
360 u8 data[4];
361 struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) };
362
363 div = c->frequency / 1000;
364 data[0] = (div >> 8) & 0x7f;
365 data[1] = div & 0xff;
366 data[2] = 0xc2;
367
368 if (div < 1450)
369 data[3] = 0x00;
370 else if (div < 1850)
371 data[3] = 0x40;
372 else if (div < 2000)
373 data[3] = 0x80;
374 else
375 data[3] = 0xc0;
376
377 if (fe->ops.i2c_gate_ctrl)
378 fe->ops.i2c_gate_ctrl(fe, 1);
379 if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO;
380
381 return 0;
382 }
383
384 static struct s5h1420_config s5h1420_config = {
385 .demod_address = 0x53,
386 .invert = 1,
387 .cdclk_polarity = 1,
388 };
389
390 static struct tda10086_config tda10086_config = {
391 .demod_address = 0x0e,
392 .invert = 0,
393 .diseqc_tone = 1,
394 .xtal_freq = TDA10086_XTAL_16M,
395 };
396
397 static struct stv0299_config alps_bsru6_config_activy = {
398 .demod_address = 0x68,
399 .inittab = alps_bsru6_inittab,
400 .mclk = 88000000UL,
401 .invert = 1,
402 .op0_off = 1,
403 .min_delay_ms = 100,
404 .set_symbol_rate = alps_bsru6_set_symbol_rate,
405 };
406
407 static struct stv0299_config alps_bsbe1_config_activy = {
408 .demod_address = 0x68,
409 .inittab = alps_bsbe1_inittab,
410 .mclk = 88000000UL,
411 .invert = 1,
412 .op0_off = 1,
413 .min_delay_ms = 100,
414 .set_symbol_rate = alps_bsbe1_set_symbol_rate,
415 };
416
alps_tdhd1_204_request_firmware(struct dvb_frontend * fe,const struct firmware ** fw,char * name)417 static int alps_tdhd1_204_request_firmware(struct dvb_frontend *fe, const struct firmware **fw, char *name)
418 {
419 struct budget *budget = (struct budget *)fe->dvb->priv;
420
421 return request_firmware(fw, name, &budget->dev->pci->dev);
422 }
423
424
i2c_readreg(struct i2c_adapter * i2c,u8 adr,u8 reg)425 static int i2c_readreg(struct i2c_adapter *i2c, u8 adr, u8 reg)
426 {
427 u8 val;
428 struct i2c_msg msg[] = {
429 { .addr = adr, .flags = 0, .buf = ®, .len = 1 },
430 { .addr = adr, .flags = I2C_M_RD, .buf = &val, .len = 1 }
431 };
432
433 return (i2c_transfer(i2c, msg, 2) != 2) ? -EIO : val;
434 }
435
read_pwm(struct budget * budget)436 static u8 read_pwm(struct budget* budget)
437 {
438 u8 b = 0xff;
439 u8 pwm;
440 struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 },
441 { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} };
442
443 if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff))
444 pwm = 0x48;
445
446 return pwm;
447 }
448
449 static struct stv090x_config tt1600_stv090x_config = {
450 .device = STV0903,
451 .demod_mode = STV090x_SINGLE,
452 .clk_mode = STV090x_CLK_EXT,
453
454 .xtal = 13500000,
455 .address = 0x68,
456
457 .ts1_mode = STV090x_TSMODE_DVBCI,
458 .ts2_mode = STV090x_TSMODE_SERIAL_CONTINUOUS,
459
460 .repeater_level = STV090x_RPTLEVEL_16,
461
462 .tuner_init = NULL,
463 .tuner_sleep = NULL,
464 .tuner_set_mode = NULL,
465 .tuner_set_frequency = NULL,
466 .tuner_get_frequency = NULL,
467 .tuner_set_bandwidth = NULL,
468 .tuner_get_bandwidth = NULL,
469 .tuner_set_bbgain = NULL,
470 .tuner_get_bbgain = NULL,
471 .tuner_set_refclk = NULL,
472 .tuner_get_status = NULL,
473 };
474
475 static struct stv6110x_config tt1600_stv6110x_config = {
476 .addr = 0x60,
477 .refclk = 27000000,
478 .clk_div = 2,
479 };
480
481 static struct isl6423_config tt1600_isl6423_config = {
482 .current_max = SEC_CURRENT_515m,
483 .curlim = SEC_CURRENT_LIM_ON,
484 .mod_extern = 1,
485 .addr = 0x08,
486 };
487
frontend_init(struct budget * budget)488 static void frontend_init(struct budget *budget)
489 {
490 (void)alps_bsbe1_config; /* avoid warning */
491
492 switch(budget->dev->pci->subsystem_device) {
493 case 0x1003: // Hauppauge/TT Nova budget (stv0299/ALPS BSRU6(tsa5059) OR ves1893/ALPS BSRV2(sp5659))
494 case 0x1013:
495 // try the ALPS BSRV2 first of all
496 budget->dvb_frontend = dvb_attach(ves1x93_attach, &alps_bsrv2_config, &budget->i2c_adap);
497 if (budget->dvb_frontend) {
498 budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsrv2_tuner_set_params;
499 budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
500 budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst;
501 budget->dvb_frontend->ops.set_tone = budget_set_tone;
502 break;
503 }
504
505 // try the ALPS BSRU6 now
506 budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget->i2c_adap);
507 if (budget->dvb_frontend) {
508 budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
509 budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
510 if (budget->dev->pci->subsystem_device == 0x1003 && diseqc_method == 0) {
511 budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd;
512 budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst;
513 budget->dvb_frontend->ops.set_tone = budget_set_tone;
514 }
515 break;
516 }
517 break;
518
519 case 0x1004: // Hauppauge/TT DVB-C budget (ves1820/ALPS TDBE2(sp5659))
520
521 budget->dvb_frontend = dvb_attach(ves1820_attach, &alps_tdbe2_config, &budget->i2c_adap, read_pwm(budget));
522 if (budget->dvb_frontend) {
523 budget->dvb_frontend->ops.tuner_ops.set_params = alps_tdbe2_tuner_set_params;
524 break;
525 }
526 break;
527
528 case 0x1005: // Hauppauge/TT Nova-T budget (L64781/Grundig 29504-401(tsa5060))
529
530 budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config, &budget->i2c_adap);
531 if (budget->dvb_frontend) {
532 budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params;
533 budget->dvb_frontend->tuner_priv = NULL;
534 break;
535 }
536 break;
537
538 case 0x4f60: /* Fujitsu Siemens Activy Budget-S PCI rev AL (stv0299/tsa5059) */
539 {
540 int subtype = i2c_readreg(&budget->i2c_adap, 0x50, 0x67);
541
542 if (subtype < 0)
543 break;
544 /* fixme: find a better way to identify the card */
545 if (subtype < 0x36) {
546 /* assume ALPS BSRU6 */
547 budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config_activy, &budget->i2c_adap);
548 if (budget->dvb_frontend) {
549 printk(KERN_INFO "budget: tuner ALPS BSRU6 detected\n");
550 budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params;
551 budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
552 budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage;
553 budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL;
554 break;
555 }
556 } else {
557 /* assume ALPS BSBE1 */
558 /* reset tuner */
559 saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTLO);
560 msleep(50);
561 saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTHI);
562 msleep(250);
563 budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsbe1_config_activy, &budget->i2c_adap);
564 if (budget->dvb_frontend) {
565 printk(KERN_INFO "budget: tuner ALPS BSBE1 detected\n");
566 budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params;
567 budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
568 budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage;
569 budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL;
570 break;
571 }
572 }
573 break;
574 }
575
576 case 0x4f61: // Fujitsu Siemens Activy Budget-S PCI rev GR (tda8083/Grundig 29504-451(tsa5522))
577 budget->dvb_frontend = dvb_attach(tda8083_attach, &grundig_29504_451_config, &budget->i2c_adap);
578 if (budget->dvb_frontend) {
579 budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_451_tuner_set_params;
580 budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage;
581 budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL;
582 }
583 break;
584
585 case 0x5f60: /* Fujitsu Siemens Activy Budget-T PCI rev AL (tda10046/ALPS TDHD1-204A) */
586 budget->dvb_frontend = dvb_attach(tda10046_attach, &alps_tdhd1_204a_config, &budget->i2c_adap);
587 if (budget->dvb_frontend) {
588 budget->dvb_frontend->ops.tuner_ops.set_params = alps_tdhd1_204a_tuner_set_params;
589 budget->dvb_frontend->tuner_priv = &budget->i2c_adap;
590 }
591 break;
592
593 case 0x5f61: /* Fujitsu Siemens Activy Budget-T PCI rev GR (L64781/Grundig 29504-401(tsa5060)) */
594 budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config_activy, &budget->i2c_adap);
595 if (budget->dvb_frontend) {
596 budget->dvb_frontend->tuner_priv = &tuner_address_grundig_29504_401_activy;
597 budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params;
598 }
599 break;
600
601 case 0x1016: // Hauppauge/TT Nova-S SE (samsung s5h1420/????(tda8260))
602 budget->dvb_frontend = dvb_attach(s5h1420_attach, &s5h1420_config, &budget->i2c_adap);
603 if (budget->dvb_frontend) {
604 budget->dvb_frontend->ops.tuner_ops.set_params = s5h1420_tuner_set_params;
605 if (dvb_attach(lnbp21_attach, budget->dvb_frontend, &budget->i2c_adap, 0, 0) == NULL) {
606 printk("%s: No LNBP21 found!\n", __func__);
607 goto error_out;
608 }
609 break;
610 }
611
612 case 0x1018: // TT Budget-S-1401 (philips tda10086/philips tda8262)
613 // gpio2 is connected to CLB - reset it + leave it high
614 saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO);
615 msleep(1);
616 saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI);
617 msleep(1);
618
619 budget->dvb_frontend = dvb_attach(tda10086_attach, &tda10086_config, &budget->i2c_adap);
620 if (budget->dvb_frontend) {
621 if (dvb_attach(tda826x_attach, budget->dvb_frontend, 0x60, &budget->i2c_adap, 0) == NULL)
622 printk("%s: No tda826x found!\n", __func__);
623 if (dvb_attach(lnbp21_attach, budget->dvb_frontend, &budget->i2c_adap, 0, 0) == NULL) {
624 printk("%s: No LNBP21 found!\n", __func__);
625 goto error_out;
626 }
627 break;
628 }
629
630 case 0x101c: { /* TT S2-1600 */
631 struct stv6110x_devctl *ctl;
632 saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO);
633 msleep(50);
634 saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI);
635 msleep(250);
636
637 budget->dvb_frontend = dvb_attach(stv090x_attach,
638 &tt1600_stv090x_config,
639 &budget->i2c_adap,
640 STV090x_DEMODULATOR_0);
641
642 if (budget->dvb_frontend) {
643
644 ctl = dvb_attach(stv6110x_attach,
645 budget->dvb_frontend,
646 &tt1600_stv6110x_config,
647 &budget->i2c_adap);
648
649 if (ctl) {
650 tt1600_stv090x_config.tuner_init = ctl->tuner_init;
651 tt1600_stv090x_config.tuner_sleep = ctl->tuner_sleep;
652 tt1600_stv090x_config.tuner_set_mode = ctl->tuner_set_mode;
653 tt1600_stv090x_config.tuner_set_frequency = ctl->tuner_set_frequency;
654 tt1600_stv090x_config.tuner_get_frequency = ctl->tuner_get_frequency;
655 tt1600_stv090x_config.tuner_set_bandwidth = ctl->tuner_set_bandwidth;
656 tt1600_stv090x_config.tuner_get_bandwidth = ctl->tuner_get_bandwidth;
657 tt1600_stv090x_config.tuner_set_bbgain = ctl->tuner_set_bbgain;
658 tt1600_stv090x_config.tuner_get_bbgain = ctl->tuner_get_bbgain;
659 tt1600_stv090x_config.tuner_set_refclk = ctl->tuner_set_refclk;
660 tt1600_stv090x_config.tuner_get_status = ctl->tuner_get_status;
661
662 /* call the init function once to initialize
663 tuner's clock output divider and demod's
664 master clock */
665 if (budget->dvb_frontend->ops.init)
666 budget->dvb_frontend->ops.init(budget->dvb_frontend);
667
668 if (dvb_attach(isl6423_attach,
669 budget->dvb_frontend,
670 &budget->i2c_adap,
671 &tt1600_isl6423_config) == NULL) {
672 printk(KERN_ERR "%s: No Intersil ISL6423 found!\n", __func__);
673 goto error_out;
674 }
675 } else {
676 printk(KERN_ERR "%s: No STV6110(A) Silicon Tuner found!\n", __func__);
677 goto error_out;
678 }
679 }
680 }
681 break;
682 }
683
684 if (budget->dvb_frontend == NULL) {
685 printk("budget: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n",
686 budget->dev->pci->vendor,
687 budget->dev->pci->device,
688 budget->dev->pci->subsystem_vendor,
689 budget->dev->pci->subsystem_device);
690 } else {
691 if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend))
692 goto error_out;
693 }
694 return;
695
696 error_out:
697 printk("budget: Frontend registration failed!\n");
698 dvb_frontend_detach(budget->dvb_frontend);
699 budget->dvb_frontend = NULL;
700 return;
701 }
702
budget_attach(struct saa7146_dev * dev,struct saa7146_pci_extension_data * info)703 static int budget_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info)
704 {
705 struct budget *budget = NULL;
706 int err;
707
708 budget = kmalloc(sizeof(struct budget), GFP_KERNEL);
709 if( NULL == budget ) {
710 return -ENOMEM;
711 }
712
713 dprintk(2, "dev:%p, info:%p, budget:%p\n", dev, info, budget);
714
715 dev->ext_priv = budget;
716
717 err = ttpci_budget_init(budget, dev, info, THIS_MODULE, adapter_nr);
718 if (err) {
719 printk("==> failed\n");
720 kfree (budget);
721 return err;
722 }
723
724 budget->dvb_adapter.priv = budget;
725 frontend_init(budget);
726
727 ttpci_budget_init_hooks(budget);
728
729 return 0;
730 }
731
budget_detach(struct saa7146_dev * dev)732 static int budget_detach (struct saa7146_dev* dev)
733 {
734 struct budget *budget = (struct budget*) dev->ext_priv;
735 int err;
736
737 if (budget->dvb_frontend) {
738 dvb_unregister_frontend(budget->dvb_frontend);
739 dvb_frontend_detach(budget->dvb_frontend);
740 }
741
742 err = ttpci_budget_deinit (budget);
743
744 kfree (budget);
745 dev->ext_priv = NULL;
746
747 return err;
748 }
749
750 static struct saa7146_extension budget_extension;
751
752 MAKE_BUDGET_INFO(ttbs, "TT-Budget/WinTV-NOVA-S PCI", BUDGET_TT);
753 MAKE_BUDGET_INFO(ttbc, "TT-Budget/WinTV-NOVA-C PCI", BUDGET_TT);
754 MAKE_BUDGET_INFO(ttbt, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT);
755 MAKE_BUDGET_INFO(satel, "SATELCO Multimedia PCI", BUDGET_TT_HW_DISEQC);
756 MAKE_BUDGET_INFO(ttbs1401, "TT-Budget-S-1401 PCI", BUDGET_TT);
757 MAKE_BUDGET_INFO(tt1600, "TT-Budget S2-1600 PCI", BUDGET_TT);
758 MAKE_BUDGET_INFO(fsacs0, "Fujitsu Siemens Activy Budget-S PCI (rev GR/grundig frontend)", BUDGET_FS_ACTIVY);
759 MAKE_BUDGET_INFO(fsacs1, "Fujitsu Siemens Activy Budget-S PCI (rev AL/alps frontend)", BUDGET_FS_ACTIVY);
760 MAKE_BUDGET_INFO(fsact, "Fujitsu Siemens Activy Budget-T PCI (rev GR/Grundig frontend)", BUDGET_FS_ACTIVY);
761 MAKE_BUDGET_INFO(fsact1, "Fujitsu Siemens Activy Budget-T PCI (rev AL/ALPS TDHD1-204A)", BUDGET_FS_ACTIVY);
762
763 static struct pci_device_id pci_tbl[] = {
764 MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1003),
765 MAKE_EXTENSION_PCI(ttbc, 0x13c2, 0x1004),
766 MAKE_EXTENSION_PCI(ttbt, 0x13c2, 0x1005),
767 MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013),
768 MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1016),
769 MAKE_EXTENSION_PCI(ttbs1401, 0x13c2, 0x1018),
770 MAKE_EXTENSION_PCI(tt1600, 0x13c2, 0x101c),
771 MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60),
772 MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61),
773 MAKE_EXTENSION_PCI(fsact1, 0x1131, 0x5f60),
774 MAKE_EXTENSION_PCI(fsact, 0x1131, 0x5f61),
775 {
776 .vendor = 0,
777 }
778 };
779
780 MODULE_DEVICE_TABLE(pci, pci_tbl);
781
782 static struct saa7146_extension budget_extension = {
783 .name = "budget dvb",
784 .flags = SAA7146_USE_I2C_IRQ,
785
786 .module = THIS_MODULE,
787 .pci_tbl = pci_tbl,
788 .attach = budget_attach,
789 .detach = budget_detach,
790
791 .irq_mask = MASK_10,
792 .irq_func = ttpci_budget_irq10_handler,
793 };
794
budget_init(void)795 static int __init budget_init(void)
796 {
797 return saa7146_register_extension(&budget_extension);
798 }
799
budget_exit(void)800 static void __exit budget_exit(void)
801 {
802 saa7146_unregister_extension(&budget_extension);
803 }
804
805 module_init(budget_init);
806 module_exit(budget_exit);
807
808 MODULE_LICENSE("GPL");
809 MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others");
810 MODULE_DESCRIPTION("driver for the SAA7146 based so-called "
811 "budget PCI DVB cards by Siemens, Technotrend, Hauppauge");
812