1 /*
2 * linux/drivers/message/fusion/mptbase.c
3 * This is the Fusion MPT base driver which supports multiple
4 * (SCSI + LAN) specialized protocol drivers.
5 * For use with LSI PCI chip/adapter(s)
6 * running LSI Fusion MPT (Message Passing Technology) firmware.
7 *
8 * Copyright (c) 1999-2008 LSI Corporation
9 * (mailto:DL-MPTFusionLinux@lsi.com)
10 *
11 */
12 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
13 /*
14 This program is free software; you can redistribute it and/or modify
15 it under the terms of the GNU General Public License as published by
16 the Free Software Foundation; version 2 of the License.
17
18 This program is distributed in the hope that it will be useful,
19 but WITHOUT ANY WARRANTY; without even the implied warranty of
20 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 GNU General Public License for more details.
22
23 NO WARRANTY
24 THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
25 CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
26 LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
27 MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
28 solely responsible for determining the appropriateness of using and
29 distributing the Program and assumes all risks associated with its
30 exercise of rights under this Agreement, including but not limited to
31 the risks and costs of program errors, damage to or loss of data,
32 programs or equipment, and unavailability or interruption of operations.
33
34 DISCLAIMER OF LIABILITY
35 NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
36 DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
38 ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
39 TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
40 USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
41 HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
42
43 You should have received a copy of the GNU General Public License
44 along with this program; if not, write to the Free Software
45 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
46 */
47 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
48
49 #include <linux/kernel.h>
50 #include <linux/module.h>
51 #include <linux/errno.h>
52 #include <linux/init.h>
53 #include <linux/seq_file.h>
54 #include <linux/slab.h>
55 #include <linux/types.h>
56 #include <linux/pci.h>
57 #include <linux/kdev_t.h>
58 #include <linux/blkdev.h>
59 #include <linux/delay.h>
60 #include <linux/interrupt.h> /* needed for in_interrupt() proto */
61 #include <linux/dma-mapping.h>
62 #include <asm/io.h>
63 #ifdef CONFIG_MTRR
64 #include <asm/mtrr.h>
65 #endif
66 #include <linux/kthread.h>
67 #include <scsi/scsi_host.h>
68
69 #include "mptbase.h"
70 #include "lsi/mpi_log_fc.h"
71
72 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
73 #define my_NAME "Fusion MPT base driver"
74 #define my_VERSION MPT_LINUX_VERSION_COMMON
75 #define MYNAM "mptbase"
76
77 MODULE_AUTHOR(MODULEAUTHOR);
78 MODULE_DESCRIPTION(my_NAME);
79 MODULE_LICENSE("GPL");
80 MODULE_VERSION(my_VERSION);
81
82 /*
83 * cmd line parameters
84 */
85
86 static int mpt_msi_enable_spi;
87 module_param(mpt_msi_enable_spi, int, 0);
88 MODULE_PARM_DESC(mpt_msi_enable_spi,
89 " Enable MSI Support for SPI controllers (default=0)");
90
91 static int mpt_msi_enable_fc;
92 module_param(mpt_msi_enable_fc, int, 0);
93 MODULE_PARM_DESC(mpt_msi_enable_fc,
94 " Enable MSI Support for FC controllers (default=0)");
95
96 static int mpt_msi_enable_sas;
97 module_param(mpt_msi_enable_sas, int, 0);
98 MODULE_PARM_DESC(mpt_msi_enable_sas,
99 " Enable MSI Support for SAS controllers (default=0)");
100
101 static int mpt_channel_mapping;
102 module_param(mpt_channel_mapping, int, 0);
103 MODULE_PARM_DESC(mpt_channel_mapping, " Mapping id's to channels (default=0)");
104
105 static int mpt_debug_level;
106 static int mpt_set_debug_level(const char *val, struct kernel_param *kp);
107 module_param_call(mpt_debug_level, mpt_set_debug_level, param_get_int,
108 &mpt_debug_level, 0600);
109 MODULE_PARM_DESC(mpt_debug_level,
110 " debug level - refer to mptdebug.h - (default=0)");
111
112 int mpt_fwfault_debug;
113 EXPORT_SYMBOL(mpt_fwfault_debug);
114 module_param(mpt_fwfault_debug, int, 0600);
115 MODULE_PARM_DESC(mpt_fwfault_debug,
116 "Enable detection of Firmware fault and halt Firmware on fault - (default=0)");
117
118 static char MptCallbacksName[MPT_MAX_PROTOCOL_DRIVERS]
119 [MPT_MAX_CALLBACKNAME_LEN+1];
120
121 #ifdef MFCNT
122 static int mfcounter = 0;
123 #define PRINT_MF_COUNT 20000
124 #endif
125
126 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
127 /*
128 * Public data...
129 */
130
131 #define WHOINIT_UNKNOWN 0xAA
132
133 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
134 /*
135 * Private data...
136 */
137 /* Adapter link list */
138 LIST_HEAD(ioc_list);
139 /* Callback lookup table */
140 static MPT_CALLBACK MptCallbacks[MPT_MAX_PROTOCOL_DRIVERS];
141 /* Protocol driver class lookup table */
142 static int MptDriverClass[MPT_MAX_PROTOCOL_DRIVERS];
143 /* Event handler lookup table */
144 static MPT_EVHANDLER MptEvHandlers[MPT_MAX_PROTOCOL_DRIVERS];
145 /* Reset handler lookup table */
146 static MPT_RESETHANDLER MptResetHandlers[MPT_MAX_PROTOCOL_DRIVERS];
147 static struct mpt_pci_driver *MptDeviceDriverHandlers[MPT_MAX_PROTOCOL_DRIVERS];
148
149 #ifdef CONFIG_PROC_FS
150 static struct proc_dir_entry *mpt_proc_root_dir;
151 #endif
152
153 /*
154 * Driver Callback Index's
155 */
156 static u8 mpt_base_index = MPT_MAX_PROTOCOL_DRIVERS;
157 static u8 last_drv_idx;
158
159 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
160 /*
161 * Forward protos...
162 */
163 static irqreturn_t mpt_interrupt(int irq, void *bus_id);
164 static int mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req,
165 MPT_FRAME_HDR *reply);
166 static int mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes,
167 u32 *req, int replyBytes, u16 *u16reply, int maxwait,
168 int sleepFlag);
169 static int mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag);
170 static void mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev);
171 static void mpt_adapter_disable(MPT_ADAPTER *ioc);
172 static void mpt_adapter_dispose(MPT_ADAPTER *ioc);
173
174 static void MptDisplayIocCapabilities(MPT_ADAPTER *ioc);
175 static int MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag);
176 static int GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason);
177 static int GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
178 static int SendIocInit(MPT_ADAPTER *ioc, int sleepFlag);
179 static int SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag);
180 static int mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag);
181 static int mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag);
182 static int mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
183 static int KickStart(MPT_ADAPTER *ioc, int ignore, int sleepFlag);
184 static int SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag);
185 static int PrimeIocFifos(MPT_ADAPTER *ioc);
186 static int WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
187 static int WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
188 static int WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag);
189 static int GetLanConfigPages(MPT_ADAPTER *ioc);
190 static int GetIoUnitPage2(MPT_ADAPTER *ioc);
191 int mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode);
192 static int mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum);
193 static int mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum);
194 static void mpt_read_ioc_pg_1(MPT_ADAPTER *ioc);
195 static void mpt_read_ioc_pg_4(MPT_ADAPTER *ioc);
196 static void mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc);
197 static int SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch,
198 int sleepFlag);
199 static int SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp);
200 static int mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag);
201 static int mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init);
202
203 #ifdef CONFIG_PROC_FS
204 static const struct file_operations mpt_summary_proc_fops;
205 static const struct file_operations mpt_version_proc_fops;
206 static const struct file_operations mpt_iocinfo_proc_fops;
207 #endif
208 static void mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc);
209
210 static int ProcessEventNotification(MPT_ADAPTER *ioc,
211 EventNotificationReply_t *evReply, int *evHandlers);
212 static void mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf);
213 static void mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info);
214 static void mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info);
215 static void mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info , u8 cb_idx);
216 static int mpt_read_ioc_pg_3(MPT_ADAPTER *ioc);
217 static void mpt_inactive_raid_list_free(MPT_ADAPTER *ioc);
218
219 /* module entry point */
220 static int __init fusion_init (void);
221 static void __exit fusion_exit (void);
222
223 #define CHIPREG_READ32(addr) readl_relaxed(addr)
224 #define CHIPREG_READ32_dmasync(addr) readl(addr)
225 #define CHIPREG_WRITE32(addr,val) writel(val, addr)
226 #define CHIPREG_PIO_WRITE32(addr,val) outl(val, (unsigned long)addr)
227 #define CHIPREG_PIO_READ32(addr) inl((unsigned long)addr)
228
229 static void
pci_disable_io_access(struct pci_dev * pdev)230 pci_disable_io_access(struct pci_dev *pdev)
231 {
232 u16 command_reg;
233
234 pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
235 command_reg &= ~1;
236 pci_write_config_word(pdev, PCI_COMMAND, command_reg);
237 }
238
239 static void
pci_enable_io_access(struct pci_dev * pdev)240 pci_enable_io_access(struct pci_dev *pdev)
241 {
242 u16 command_reg;
243
244 pci_read_config_word(pdev, PCI_COMMAND, &command_reg);
245 command_reg |= 1;
246 pci_write_config_word(pdev, PCI_COMMAND, command_reg);
247 }
248
mpt_set_debug_level(const char * val,struct kernel_param * kp)249 static int mpt_set_debug_level(const char *val, struct kernel_param *kp)
250 {
251 int ret = param_set_int(val, kp);
252 MPT_ADAPTER *ioc;
253
254 if (ret)
255 return ret;
256
257 list_for_each_entry(ioc, &ioc_list, list)
258 ioc->debug_level = mpt_debug_level;
259 return 0;
260 }
261
262 /**
263 * mpt_get_cb_idx - obtain cb_idx for registered driver
264 * @dclass: class driver enum
265 *
266 * Returns cb_idx, or zero means it wasn't found
267 **/
268 static u8
mpt_get_cb_idx(MPT_DRIVER_CLASS dclass)269 mpt_get_cb_idx(MPT_DRIVER_CLASS dclass)
270 {
271 u8 cb_idx;
272
273 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--)
274 if (MptDriverClass[cb_idx] == dclass)
275 return cb_idx;
276 return 0;
277 }
278
279 /**
280 * mpt_is_discovery_complete - determine if discovery has completed
281 * @ioc: per adatper instance
282 *
283 * Returns 1 when discovery completed, else zero.
284 */
285 static int
mpt_is_discovery_complete(MPT_ADAPTER * ioc)286 mpt_is_discovery_complete(MPT_ADAPTER *ioc)
287 {
288 ConfigExtendedPageHeader_t hdr;
289 CONFIGPARMS cfg;
290 SasIOUnitPage0_t *buffer;
291 dma_addr_t dma_handle;
292 int rc = 0;
293
294 memset(&hdr, 0, sizeof(ConfigExtendedPageHeader_t));
295 memset(&cfg, 0, sizeof(CONFIGPARMS));
296 hdr.PageVersion = MPI_SASIOUNITPAGE0_PAGEVERSION;
297 hdr.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
298 hdr.ExtPageType = MPI_CONFIG_EXTPAGETYPE_SAS_IO_UNIT;
299 cfg.cfghdr.ehdr = &hdr;
300 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
301
302 if ((mpt_config(ioc, &cfg)))
303 goto out;
304 if (!hdr.ExtPageLength)
305 goto out;
306
307 buffer = pci_alloc_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
308 &dma_handle);
309 if (!buffer)
310 goto out;
311
312 cfg.physAddr = dma_handle;
313 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
314
315 if ((mpt_config(ioc, &cfg)))
316 goto out_free_consistent;
317
318 if (!(buffer->PhyData[0].PortFlags &
319 MPI_SAS_IOUNIT0_PORT_FLAGS_DISCOVERY_IN_PROGRESS))
320 rc = 1;
321
322 out_free_consistent:
323 pci_free_consistent(ioc->pcidev, hdr.ExtPageLength * 4,
324 buffer, dma_handle);
325 out:
326 return rc;
327 }
328
329
330 /**
331 * mpt_remove_dead_ioc_func - kthread context to remove dead ioc
332 * @arg: input argument, used to derive ioc
333 *
334 * Return 0 if controller is removed from pci subsystem.
335 * Return -1 for other case.
336 */
mpt_remove_dead_ioc_func(void * arg)337 static int mpt_remove_dead_ioc_func(void *arg)
338 {
339 MPT_ADAPTER *ioc = (MPT_ADAPTER *)arg;
340 struct pci_dev *pdev;
341
342 if ((ioc == NULL))
343 return -1;
344
345 pdev = ioc->pcidev;
346 if ((pdev == NULL))
347 return -1;
348
349 pci_stop_and_remove_bus_device(pdev);
350 return 0;
351 }
352
353
354
355 /**
356 * mpt_fault_reset_work - work performed on workq after ioc fault
357 * @work: input argument, used to derive ioc
358 *
359 **/
360 static void
mpt_fault_reset_work(struct work_struct * work)361 mpt_fault_reset_work(struct work_struct *work)
362 {
363 MPT_ADAPTER *ioc =
364 container_of(work, MPT_ADAPTER, fault_reset_work.work);
365 u32 ioc_raw_state;
366 int rc;
367 unsigned long flags;
368 MPT_SCSI_HOST *hd;
369 struct task_struct *p;
370
371 if (ioc->ioc_reset_in_progress || !ioc->active)
372 goto out;
373
374
375 ioc_raw_state = mpt_GetIocState(ioc, 0);
376 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_MASK) {
377 printk(MYIOC_s_INFO_FMT "%s: IOC is non-operational !!!!\n",
378 ioc->name, __func__);
379
380 /*
381 * Call mptscsih_flush_pending_cmds callback so that we
382 * flush all pending commands back to OS.
383 * This call is required to aovid deadlock at block layer.
384 * Dead IOC will fail to do diag reset,and this call is safe
385 * since dead ioc will never return any command back from HW.
386 */
387 hd = shost_priv(ioc->sh);
388 ioc->schedule_dead_ioc_flush_running_cmds(hd);
389
390 /*Remove the Dead Host */
391 p = kthread_run(mpt_remove_dead_ioc_func, ioc,
392 "mpt_dead_ioc_%d", ioc->id);
393 if (IS_ERR(p)) {
394 printk(MYIOC_s_ERR_FMT
395 "%s: Running mpt_dead_ioc thread failed !\n",
396 ioc->name, __func__);
397 } else {
398 printk(MYIOC_s_WARN_FMT
399 "%s: Running mpt_dead_ioc thread success !\n",
400 ioc->name, __func__);
401 }
402 return; /* don't rearm timer */
403 }
404
405 if ((ioc_raw_state & MPI_IOC_STATE_MASK)
406 == MPI_IOC_STATE_FAULT) {
407 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n",
408 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
409 printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
410 ioc->name, __func__);
411 rc = mpt_HardResetHandler(ioc, CAN_SLEEP);
412 printk(MYIOC_s_WARN_FMT "%s: HardReset: %s\n", ioc->name,
413 __func__, (rc == 0) ? "success" : "failed");
414 ioc_raw_state = mpt_GetIocState(ioc, 0);
415 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT)
416 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after "
417 "reset (%04xh)\n", ioc->name, ioc_raw_state &
418 MPI_DOORBELL_DATA_MASK);
419 } else if (ioc->bus_type == SAS && ioc->sas_discovery_quiesce_io) {
420 if ((mpt_is_discovery_complete(ioc))) {
421 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing "
422 "discovery_quiesce_io flag\n", ioc->name));
423 ioc->sas_discovery_quiesce_io = 0;
424 }
425 }
426
427 out:
428 /*
429 * Take turns polling alternate controller
430 */
431 if (ioc->alt_ioc)
432 ioc = ioc->alt_ioc;
433
434 /* rearm the timer */
435 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
436 if (ioc->reset_work_q)
437 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
438 msecs_to_jiffies(MPT_POLLING_INTERVAL));
439 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
440 }
441
442
443 /*
444 * Process turbo (context) reply...
445 */
446 static void
mpt_turbo_reply(MPT_ADAPTER * ioc,u32 pa)447 mpt_turbo_reply(MPT_ADAPTER *ioc, u32 pa)
448 {
449 MPT_FRAME_HDR *mf = NULL;
450 MPT_FRAME_HDR *mr = NULL;
451 u16 req_idx = 0;
452 u8 cb_idx;
453
454 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got TURBO reply req_idx=%08x\n",
455 ioc->name, pa));
456
457 switch (pa >> MPI_CONTEXT_REPLY_TYPE_SHIFT) {
458 case MPI_CONTEXT_REPLY_TYPE_SCSI_INIT:
459 req_idx = pa & 0x0000FFFF;
460 cb_idx = (pa & 0x00FF0000) >> 16;
461 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
462 break;
463 case MPI_CONTEXT_REPLY_TYPE_LAN:
464 cb_idx = mpt_get_cb_idx(MPTLAN_DRIVER);
465 /*
466 * Blind set of mf to NULL here was fatal
467 * after lan_reply says "freeme"
468 * Fix sort of combined with an optimization here;
469 * added explicit check for case where lan_reply
470 * was just returning 1 and doing nothing else.
471 * For this case skip the callback, but set up
472 * proper mf value first here:-)
473 */
474 if ((pa & 0x58000000) == 0x58000000) {
475 req_idx = pa & 0x0000FFFF;
476 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
477 mpt_free_msg_frame(ioc, mf);
478 mb();
479 return;
480 break;
481 }
482 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
483 break;
484 case MPI_CONTEXT_REPLY_TYPE_SCSI_TARGET:
485 cb_idx = mpt_get_cb_idx(MPTSTM_DRIVER);
486 mr = (MPT_FRAME_HDR *) CAST_U32_TO_PTR(pa);
487 break;
488 default:
489 cb_idx = 0;
490 BUG();
491 }
492
493 /* Check for (valid) IO callback! */
494 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
495 MptCallbacks[cb_idx] == NULL) {
496 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
497 __func__, ioc->name, cb_idx);
498 goto out;
499 }
500
501 if (MptCallbacks[cb_idx](ioc, mf, mr))
502 mpt_free_msg_frame(ioc, mf);
503 out:
504 mb();
505 }
506
507 static void
mpt_reply(MPT_ADAPTER * ioc,u32 pa)508 mpt_reply(MPT_ADAPTER *ioc, u32 pa)
509 {
510 MPT_FRAME_HDR *mf;
511 MPT_FRAME_HDR *mr;
512 u16 req_idx;
513 u8 cb_idx;
514 int freeme;
515
516 u32 reply_dma_low;
517 u16 ioc_stat;
518
519 /* non-TURBO reply! Hmmm, something may be up...
520 * Newest turbo reply mechanism; get address
521 * via left shift 1 (get rid of MPI_ADDRESS_REPLY_A_BIT)!
522 */
523
524 /* Map DMA address of reply header to cpu address.
525 * pa is 32 bits - but the dma address may be 32 or 64 bits
526 * get offset based only only the low addresses
527 */
528
529 reply_dma_low = (pa <<= 1);
530 mr = (MPT_FRAME_HDR *)((u8 *)ioc->reply_frames +
531 (reply_dma_low - ioc->reply_frames_low_dma));
532
533 req_idx = le16_to_cpu(mr->u.frame.hwhdr.msgctxu.fld.req_idx);
534 cb_idx = mr->u.frame.hwhdr.msgctxu.fld.cb_idx;
535 mf = MPT_INDEX_2_MFPTR(ioc, req_idx);
536
537 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n",
538 ioc->name, mr, req_idx, cb_idx, mr->u.hdr.Function));
539 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mr);
540
541 /* Check/log IOC log info
542 */
543 ioc_stat = le16_to_cpu(mr->u.reply.IOCStatus);
544 if (ioc_stat & MPI_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE) {
545 u32 log_info = le32_to_cpu(mr->u.reply.IOCLogInfo);
546 if (ioc->bus_type == FC)
547 mpt_fc_log_info(ioc, log_info);
548 else if (ioc->bus_type == SPI)
549 mpt_spi_log_info(ioc, log_info);
550 else if (ioc->bus_type == SAS)
551 mpt_sas_log_info(ioc, log_info, cb_idx);
552 }
553
554 if (ioc_stat & MPI_IOCSTATUS_MASK)
555 mpt_iocstatus_info(ioc, (u32)ioc_stat, mf);
556
557 /* Check for (valid) IO callback! */
558 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS ||
559 MptCallbacks[cb_idx] == NULL) {
560 printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
561 __func__, ioc->name, cb_idx);
562 freeme = 0;
563 goto out;
564 }
565
566 freeme = MptCallbacks[cb_idx](ioc, mf, mr);
567
568 out:
569 /* Flush (non-TURBO) reply with a WRITE! */
570 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, pa);
571
572 if (freeme)
573 mpt_free_msg_frame(ioc, mf);
574 mb();
575 }
576
577 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
578 /**
579 * mpt_interrupt - MPT adapter (IOC) specific interrupt handler.
580 * @irq: irq number (not used)
581 * @bus_id: bus identifier cookie == pointer to MPT_ADAPTER structure
582 *
583 * This routine is registered via the request_irq() kernel API call,
584 * and handles all interrupts generated from a specific MPT adapter
585 * (also referred to as a IO Controller or IOC).
586 * This routine must clear the interrupt from the adapter and does
587 * so by reading the reply FIFO. Multiple replies may be processed
588 * per single call to this routine.
589 *
590 * This routine handles register-level access of the adapter but
591 * dispatches (calls) a protocol-specific callback routine to handle
592 * the protocol-specific details of the MPT request completion.
593 */
594 static irqreturn_t
mpt_interrupt(int irq,void * bus_id)595 mpt_interrupt(int irq, void *bus_id)
596 {
597 MPT_ADAPTER *ioc = bus_id;
598 u32 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
599
600 if (pa == 0xFFFFFFFF)
601 return IRQ_NONE;
602
603 /*
604 * Drain the reply FIFO!
605 */
606 do {
607 if (pa & MPI_ADDRESS_REPLY_A_BIT)
608 mpt_reply(ioc, pa);
609 else
610 mpt_turbo_reply(ioc, pa);
611 pa = CHIPREG_READ32_dmasync(&ioc->chip->ReplyFifo);
612 } while (pa != 0xFFFFFFFF);
613
614 return IRQ_HANDLED;
615 }
616
617 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
618 /**
619 * mptbase_reply - MPT base driver's callback routine
620 * @ioc: Pointer to MPT_ADAPTER structure
621 * @req: Pointer to original MPT request frame
622 * @reply: Pointer to MPT reply frame (NULL if TurboReply)
623 *
624 * MPT base driver's callback routine; all base driver
625 * "internal" request/reply processing is routed here.
626 * Currently used for EventNotification and EventAck handling.
627 *
628 * Returns 1 indicating original alloc'd request frame ptr
629 * should be freed, or 0 if it shouldn't.
630 */
631 static int
mptbase_reply(MPT_ADAPTER * ioc,MPT_FRAME_HDR * req,MPT_FRAME_HDR * reply)632 mptbase_reply(MPT_ADAPTER *ioc, MPT_FRAME_HDR *req, MPT_FRAME_HDR *reply)
633 {
634 EventNotificationReply_t *pEventReply;
635 u8 event;
636 int evHandlers;
637 int freereq = 1;
638
639 switch (reply->u.hdr.Function) {
640 case MPI_FUNCTION_EVENT_NOTIFICATION:
641 pEventReply = (EventNotificationReply_t *)reply;
642 evHandlers = 0;
643 ProcessEventNotification(ioc, pEventReply, &evHandlers);
644 event = le32_to_cpu(pEventReply->Event) & 0xFF;
645 if (pEventReply->MsgFlags & MPI_MSGFLAGS_CONTINUATION_REPLY)
646 freereq = 0;
647 if (event != MPI_EVENT_EVENT_CHANGE)
648 break;
649 case MPI_FUNCTION_CONFIG:
650 case MPI_FUNCTION_SAS_IO_UNIT_CONTROL:
651 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_COMMAND_GOOD;
652 if (reply) {
653 ioc->mptbase_cmds.status |= MPT_MGMT_STATUS_RF_VALID;
654 memcpy(ioc->mptbase_cmds.reply, reply,
655 min(MPT_DEFAULT_FRAME_SIZE,
656 4 * reply->u.reply.MsgLength));
657 }
658 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
659 ioc->mptbase_cmds.status &= ~MPT_MGMT_STATUS_PENDING;
660 complete(&ioc->mptbase_cmds.done);
661 } else
662 freereq = 0;
663 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_FREE_MF)
664 freereq = 1;
665 break;
666 case MPI_FUNCTION_EVENT_ACK:
667 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
668 "EventAck reply received\n", ioc->name));
669 break;
670 default:
671 printk(MYIOC_s_ERR_FMT
672 "Unexpected msg function (=%02Xh) reply received!\n",
673 ioc->name, reply->u.hdr.Function);
674 break;
675 }
676
677 /*
678 * Conditionally tell caller to free the original
679 * EventNotification/EventAck/unexpected request frame!
680 */
681 return freereq;
682 }
683
684 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
685 /**
686 * mpt_register - Register protocol-specific main callback handler.
687 * @cbfunc: callback function pointer
688 * @dclass: Protocol driver's class (%MPT_DRIVER_CLASS enum value)
689 * @func_name: call function's name
690 *
691 * This routine is called by a protocol-specific driver (SCSI host,
692 * LAN, SCSI target) to register its reply callback routine. Each
693 * protocol-specific driver must do this before it will be able to
694 * use any IOC resources, such as obtaining request frames.
695 *
696 * NOTES: The SCSI protocol driver currently calls this routine thrice
697 * in order to register separate callbacks; one for "normal" SCSI IO;
698 * one for MptScsiTaskMgmt requests; one for Scan/DV requests.
699 *
700 * Returns u8 valued "handle" in the range (and S.O.D. order)
701 * {N,...,7,6,5,...,1} if successful.
702 * A return value of MPT_MAX_PROTOCOL_DRIVERS (including zero!) should be
703 * considered an error by the caller.
704 */
705 u8
mpt_register(MPT_CALLBACK cbfunc,MPT_DRIVER_CLASS dclass,char * func_name)706 mpt_register(MPT_CALLBACK cbfunc, MPT_DRIVER_CLASS dclass, char *func_name)
707 {
708 u8 cb_idx;
709 last_drv_idx = MPT_MAX_PROTOCOL_DRIVERS;
710
711 /*
712 * Search for empty callback slot in this order: {N,...,7,6,5,...,1}
713 * (slot/handle 0 is reserved!)
714 */
715 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
716 if (MptCallbacks[cb_idx] == NULL) {
717 MptCallbacks[cb_idx] = cbfunc;
718 MptDriverClass[cb_idx] = dclass;
719 MptEvHandlers[cb_idx] = NULL;
720 last_drv_idx = cb_idx;
721 strlcpy(MptCallbacksName[cb_idx], func_name,
722 MPT_MAX_CALLBACKNAME_LEN+1);
723 break;
724 }
725 }
726
727 return last_drv_idx;
728 }
729
730 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
731 /**
732 * mpt_deregister - Deregister a protocol drivers resources.
733 * @cb_idx: previously registered callback handle
734 *
735 * Each protocol-specific driver should call this routine when its
736 * module is unloaded.
737 */
738 void
mpt_deregister(u8 cb_idx)739 mpt_deregister(u8 cb_idx)
740 {
741 if (cb_idx && (cb_idx < MPT_MAX_PROTOCOL_DRIVERS)) {
742 MptCallbacks[cb_idx] = NULL;
743 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
744 MptEvHandlers[cb_idx] = NULL;
745
746 last_drv_idx++;
747 }
748 }
749
750 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
751 /**
752 * mpt_event_register - Register protocol-specific event callback handler.
753 * @cb_idx: previously registered (via mpt_register) callback handle
754 * @ev_cbfunc: callback function
755 *
756 * This routine can be called by one or more protocol-specific drivers
757 * if/when they choose to be notified of MPT events.
758 *
759 * Returns 0 for success.
760 */
761 int
mpt_event_register(u8 cb_idx,MPT_EVHANDLER ev_cbfunc)762 mpt_event_register(u8 cb_idx, MPT_EVHANDLER ev_cbfunc)
763 {
764 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
765 return -1;
766
767 MptEvHandlers[cb_idx] = ev_cbfunc;
768 return 0;
769 }
770
771 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
772 /**
773 * mpt_event_deregister - Deregister protocol-specific event callback handler
774 * @cb_idx: previously registered callback handle
775 *
776 * Each protocol-specific driver should call this routine
777 * when it does not (or can no longer) handle events,
778 * or when its module is unloaded.
779 */
780 void
mpt_event_deregister(u8 cb_idx)781 mpt_event_deregister(u8 cb_idx)
782 {
783 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
784 return;
785
786 MptEvHandlers[cb_idx] = NULL;
787 }
788
789 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
790 /**
791 * mpt_reset_register - Register protocol-specific IOC reset handler.
792 * @cb_idx: previously registered (via mpt_register) callback handle
793 * @reset_func: reset function
794 *
795 * This routine can be called by one or more protocol-specific drivers
796 * if/when they choose to be notified of IOC resets.
797 *
798 * Returns 0 for success.
799 */
800 int
mpt_reset_register(u8 cb_idx,MPT_RESETHANDLER reset_func)801 mpt_reset_register(u8 cb_idx, MPT_RESETHANDLER reset_func)
802 {
803 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
804 return -1;
805
806 MptResetHandlers[cb_idx] = reset_func;
807 return 0;
808 }
809
810 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
811 /**
812 * mpt_reset_deregister - Deregister protocol-specific IOC reset handler.
813 * @cb_idx: previously registered callback handle
814 *
815 * Each protocol-specific driver should call this routine
816 * when it does not (or can no longer) handle IOC reset handling,
817 * or when its module is unloaded.
818 */
819 void
mpt_reset_deregister(u8 cb_idx)820 mpt_reset_deregister(u8 cb_idx)
821 {
822 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
823 return;
824
825 MptResetHandlers[cb_idx] = NULL;
826 }
827
828 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
829 /**
830 * mpt_device_driver_register - Register device driver hooks
831 * @dd_cbfunc: driver callbacks struct
832 * @cb_idx: MPT protocol driver index
833 */
834 int
mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc,u8 cb_idx)835 mpt_device_driver_register(struct mpt_pci_driver * dd_cbfunc, u8 cb_idx)
836 {
837 MPT_ADAPTER *ioc;
838 const struct pci_device_id *id;
839
840 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
841 return -EINVAL;
842
843 MptDeviceDriverHandlers[cb_idx] = dd_cbfunc;
844
845 /* call per pci device probe entry point */
846 list_for_each_entry(ioc, &ioc_list, list) {
847 id = ioc->pcidev->driver ?
848 ioc->pcidev->driver->id_table : NULL;
849 if (dd_cbfunc->probe)
850 dd_cbfunc->probe(ioc->pcidev, id);
851 }
852
853 return 0;
854 }
855
856 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
857 /**
858 * mpt_device_driver_deregister - DeRegister device driver hooks
859 * @cb_idx: MPT protocol driver index
860 */
861 void
mpt_device_driver_deregister(u8 cb_idx)862 mpt_device_driver_deregister(u8 cb_idx)
863 {
864 struct mpt_pci_driver *dd_cbfunc;
865 MPT_ADAPTER *ioc;
866
867 if (!cb_idx || cb_idx >= MPT_MAX_PROTOCOL_DRIVERS)
868 return;
869
870 dd_cbfunc = MptDeviceDriverHandlers[cb_idx];
871
872 list_for_each_entry(ioc, &ioc_list, list) {
873 if (dd_cbfunc->remove)
874 dd_cbfunc->remove(ioc->pcidev);
875 }
876
877 MptDeviceDriverHandlers[cb_idx] = NULL;
878 }
879
880
881 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
882 /**
883 * mpt_get_msg_frame - Obtain an MPT request frame from the pool
884 * @cb_idx: Handle of registered MPT protocol driver
885 * @ioc: Pointer to MPT adapter structure
886 *
887 * Obtain an MPT request frame from the pool (of 1024) that are
888 * allocated per MPT adapter.
889 *
890 * Returns pointer to a MPT request frame or %NULL if none are available
891 * or IOC is not active.
892 */
893 MPT_FRAME_HDR*
mpt_get_msg_frame(u8 cb_idx,MPT_ADAPTER * ioc)894 mpt_get_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc)
895 {
896 MPT_FRAME_HDR *mf;
897 unsigned long flags;
898 u16 req_idx; /* Request index */
899
900 /* validate handle and ioc identifier */
901
902 #ifdef MFCNT
903 if (!ioc->active)
904 printk(MYIOC_s_WARN_FMT "IOC Not Active! mpt_get_msg_frame "
905 "returning NULL!\n", ioc->name);
906 #endif
907
908 /* If interrupts are not attached, do not return a request frame */
909 if (!ioc->active)
910 return NULL;
911
912 spin_lock_irqsave(&ioc->FreeQlock, flags);
913 if (!list_empty(&ioc->FreeQ)) {
914 int req_offset;
915
916 mf = list_entry(ioc->FreeQ.next, MPT_FRAME_HDR,
917 u.frame.linkage.list);
918 list_del(&mf->u.frame.linkage.list);
919 mf->u.frame.linkage.arg1 = 0;
920 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
921 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
922 /* u16! */
923 req_idx = req_offset / ioc->req_sz;
924 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
925 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
926 /* Default, will be changed if necessary in SG generation */
927 ioc->RequestNB[req_idx] = ioc->NB_for_64_byte_frame;
928 #ifdef MFCNT
929 ioc->mfcnt++;
930 #endif
931 }
932 else
933 mf = NULL;
934 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
935
936 #ifdef MFCNT
937 if (mf == NULL)
938 printk(MYIOC_s_WARN_FMT "IOC Active. No free Msg Frames! "
939 "Count 0x%x Max 0x%x\n", ioc->name, ioc->mfcnt,
940 ioc->req_depth);
941 mfcounter++;
942 if (mfcounter == PRINT_MF_COUNT)
943 printk(MYIOC_s_INFO_FMT "MF Count 0x%x Max 0x%x \n", ioc->name,
944 ioc->mfcnt, ioc->req_depth);
945 #endif
946
947 dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_get_msg_frame(%d,%d), got mf=%p\n",
948 ioc->name, cb_idx, ioc->id, mf));
949 return mf;
950 }
951
952 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
953 /**
954 * mpt_put_msg_frame - Send a protocol-specific MPT request frame to an IOC
955 * @cb_idx: Handle of registered MPT protocol driver
956 * @ioc: Pointer to MPT adapter structure
957 * @mf: Pointer to MPT request frame
958 *
959 * This routine posts an MPT request frame to the request post FIFO of a
960 * specific MPT adapter.
961 */
962 void
mpt_put_msg_frame(u8 cb_idx,MPT_ADAPTER * ioc,MPT_FRAME_HDR * mf)963 mpt_put_msg_frame(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
964 {
965 u32 mf_dma_addr;
966 int req_offset;
967 u16 req_idx; /* Request index */
968
969 /* ensure values are reset properly! */
970 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx; /* byte */
971 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
972 /* u16! */
973 req_idx = req_offset / ioc->req_sz;
974 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
975 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
976
977 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
978
979 mf_dma_addr = (ioc->req_frames_low_dma + req_offset) | ioc->RequestNB[req_idx];
980 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d "
981 "RequestNB=%x\n", ioc->name, mf_dma_addr, req_idx,
982 ioc->RequestNB[req_idx]));
983 CHIPREG_WRITE32(&ioc->chip->RequestFifo, mf_dma_addr);
984 }
985
986 /**
987 * mpt_put_msg_frame_hi_pri - Send a hi-pri protocol-specific MPT request frame
988 * @cb_idx: Handle of registered MPT protocol driver
989 * @ioc: Pointer to MPT adapter structure
990 * @mf: Pointer to MPT request frame
991 *
992 * Send a protocol-specific MPT request frame to an IOC using
993 * hi-priority request queue.
994 *
995 * This routine posts an MPT request frame to the request post FIFO of a
996 * specific MPT adapter.
997 **/
998 void
mpt_put_msg_frame_hi_pri(u8 cb_idx,MPT_ADAPTER * ioc,MPT_FRAME_HDR * mf)999 mpt_put_msg_frame_hi_pri(u8 cb_idx, MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
1000 {
1001 u32 mf_dma_addr;
1002 int req_offset;
1003 u16 req_idx; /* Request index */
1004
1005 /* ensure values are reset properly! */
1006 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
1007 req_offset = (u8 *)mf - (u8 *)ioc->req_frames;
1008 req_idx = req_offset / ioc->req_sz;
1009 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(req_idx);
1010 mf->u.frame.hwhdr.msgctxu.fld.rsvd = 0;
1011
1012 DBG_DUMP_PUT_MSG_FRAME(ioc, (u32 *)mf);
1013
1014 mf_dma_addr = (ioc->req_frames_low_dma + req_offset);
1015 dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d\n",
1016 ioc->name, mf_dma_addr, req_idx));
1017 CHIPREG_WRITE32(&ioc->chip->RequestHiPriFifo, mf_dma_addr);
1018 }
1019
1020 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1021 /**
1022 * mpt_free_msg_frame - Place MPT request frame back on FreeQ.
1023 * @ioc: Pointer to MPT adapter structure
1024 * @mf: Pointer to MPT request frame
1025 *
1026 * This routine places a MPT request frame back on the MPT adapter's
1027 * FreeQ.
1028 */
1029 void
mpt_free_msg_frame(MPT_ADAPTER * ioc,MPT_FRAME_HDR * mf)1030 mpt_free_msg_frame(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf)
1031 {
1032 unsigned long flags;
1033
1034 /* Put Request back on FreeQ! */
1035 spin_lock_irqsave(&ioc->FreeQlock, flags);
1036 if (cpu_to_le32(mf->u.frame.linkage.arg1) == 0xdeadbeaf)
1037 goto out;
1038 /* signature to know if this mf is freed */
1039 mf->u.frame.linkage.arg1 = cpu_to_le32(0xdeadbeaf);
1040 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
1041 #ifdef MFCNT
1042 ioc->mfcnt--;
1043 #endif
1044 out:
1045 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
1046 }
1047
1048 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1049 /**
1050 * mpt_add_sge - Place a simple 32 bit SGE at address pAddr.
1051 * @pAddr: virtual address for SGE
1052 * @flagslength: SGE flags and data transfer length
1053 * @dma_addr: Physical address
1054 *
1055 * This routine places a MPT request frame back on the MPT adapter's
1056 * FreeQ.
1057 */
1058 static void
mpt_add_sge(void * pAddr,u32 flagslength,dma_addr_t dma_addr)1059 mpt_add_sge(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1060 {
1061 SGESimple32_t *pSge = (SGESimple32_t *) pAddr;
1062 pSge->FlagsLength = cpu_to_le32(flagslength);
1063 pSge->Address = cpu_to_le32(dma_addr);
1064 }
1065
1066 /**
1067 * mpt_add_sge_64bit - Place a simple 64 bit SGE at address pAddr.
1068 * @pAddr: virtual address for SGE
1069 * @flagslength: SGE flags and data transfer length
1070 * @dma_addr: Physical address
1071 *
1072 * This routine places a MPT request frame back on the MPT adapter's
1073 * FreeQ.
1074 **/
1075 static void
mpt_add_sge_64bit(void * pAddr,u32 flagslength,dma_addr_t dma_addr)1076 mpt_add_sge_64bit(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1077 {
1078 SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1079 pSge->Address.Low = cpu_to_le32
1080 (lower_32_bits(dma_addr));
1081 pSge->Address.High = cpu_to_le32
1082 (upper_32_bits(dma_addr));
1083 pSge->FlagsLength = cpu_to_le32
1084 ((flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1085 }
1086
1087 /**
1088 * mpt_add_sge_64bit_1078 - Place a simple 64 bit SGE at address pAddr (1078 workaround).
1089 * @pAddr: virtual address for SGE
1090 * @flagslength: SGE flags and data transfer length
1091 * @dma_addr: Physical address
1092 *
1093 * This routine places a MPT request frame back on the MPT adapter's
1094 * FreeQ.
1095 **/
1096 static void
mpt_add_sge_64bit_1078(void * pAddr,u32 flagslength,dma_addr_t dma_addr)1097 mpt_add_sge_64bit_1078(void *pAddr, u32 flagslength, dma_addr_t dma_addr)
1098 {
1099 SGESimple64_t *pSge = (SGESimple64_t *) pAddr;
1100 u32 tmp;
1101
1102 pSge->Address.Low = cpu_to_le32
1103 (lower_32_bits(dma_addr));
1104 tmp = (u32)(upper_32_bits(dma_addr));
1105
1106 /*
1107 * 1078 errata workaround for the 36GB limitation
1108 */
1109 if ((((u64)dma_addr + MPI_SGE_LENGTH(flagslength)) >> 32) == 9) {
1110 flagslength |=
1111 MPI_SGE_SET_FLAGS(MPI_SGE_FLAGS_LOCAL_ADDRESS);
1112 tmp |= (1<<31);
1113 if (mpt_debug_level & MPT_DEBUG_36GB_MEM)
1114 printk(KERN_DEBUG "1078 P0M2 addressing for "
1115 "addr = 0x%llx len = %d\n",
1116 (unsigned long long)dma_addr,
1117 MPI_SGE_LENGTH(flagslength));
1118 }
1119
1120 pSge->Address.High = cpu_to_le32(tmp);
1121 pSge->FlagsLength = cpu_to_le32(
1122 (flagslength | MPT_SGE_FLAGS_64_BIT_ADDRESSING));
1123 }
1124
1125 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1126 /**
1127 * mpt_add_chain - Place a 32 bit chain SGE at address pAddr.
1128 * @pAddr: virtual address for SGE
1129 * @next: nextChainOffset value (u32's)
1130 * @length: length of next SGL segment
1131 * @dma_addr: Physical address
1132 *
1133 */
1134 static void
mpt_add_chain(void * pAddr,u8 next,u16 length,dma_addr_t dma_addr)1135 mpt_add_chain(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1136 {
1137 SGEChain32_t *pChain = (SGEChain32_t *) pAddr;
1138 pChain->Length = cpu_to_le16(length);
1139 pChain->Flags = MPI_SGE_FLAGS_CHAIN_ELEMENT;
1140 pChain->NextChainOffset = next;
1141 pChain->Address = cpu_to_le32(dma_addr);
1142 }
1143
1144 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1145 /**
1146 * mpt_add_chain_64bit - Place a 64 bit chain SGE at address pAddr.
1147 * @pAddr: virtual address for SGE
1148 * @next: nextChainOffset value (u32's)
1149 * @length: length of next SGL segment
1150 * @dma_addr: Physical address
1151 *
1152 */
1153 static void
mpt_add_chain_64bit(void * pAddr,u8 next,u16 length,dma_addr_t dma_addr)1154 mpt_add_chain_64bit(void *pAddr, u8 next, u16 length, dma_addr_t dma_addr)
1155 {
1156 SGEChain64_t *pChain = (SGEChain64_t *) pAddr;
1157 u32 tmp = dma_addr & 0xFFFFFFFF;
1158
1159 pChain->Length = cpu_to_le16(length);
1160 pChain->Flags = (MPI_SGE_FLAGS_CHAIN_ELEMENT |
1161 MPI_SGE_FLAGS_64_BIT_ADDRESSING);
1162
1163 pChain->NextChainOffset = next;
1164
1165 pChain->Address.Low = cpu_to_le32(tmp);
1166 tmp = (u32)(upper_32_bits(dma_addr));
1167 pChain->Address.High = cpu_to_le32(tmp);
1168 }
1169
1170 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1171 /**
1172 * mpt_send_handshake_request - Send MPT request via doorbell handshake method.
1173 * @cb_idx: Handle of registered MPT protocol driver
1174 * @ioc: Pointer to MPT adapter structure
1175 * @reqBytes: Size of the request in bytes
1176 * @req: Pointer to MPT request frame
1177 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
1178 *
1179 * This routine is used exclusively to send MptScsiTaskMgmt
1180 * requests since they are required to be sent via doorbell handshake.
1181 *
1182 * NOTE: It is the callers responsibility to byte-swap fields in the
1183 * request which are greater than 1 byte in size.
1184 *
1185 * Returns 0 for success, non-zero for failure.
1186 */
1187 int
mpt_send_handshake_request(u8 cb_idx,MPT_ADAPTER * ioc,int reqBytes,u32 * req,int sleepFlag)1188 mpt_send_handshake_request(u8 cb_idx, MPT_ADAPTER *ioc, int reqBytes, u32 *req, int sleepFlag)
1189 {
1190 int r = 0;
1191 u8 *req_as_bytes;
1192 int ii;
1193
1194 /* State is known to be good upon entering
1195 * this function so issue the bus reset
1196 * request.
1197 */
1198
1199 /*
1200 * Emulate what mpt_put_msg_frame() does /wrt to sanity
1201 * setting cb_idx/req_idx. But ONLY if this request
1202 * is in proper (pre-alloc'd) request buffer range...
1203 */
1204 ii = MFPTR_2_MPT_INDEX(ioc,(MPT_FRAME_HDR*)req);
1205 if (reqBytes >= 12 && ii >= 0 && ii < ioc->req_depth) {
1206 MPT_FRAME_HDR *mf = (MPT_FRAME_HDR*)req;
1207 mf->u.frame.hwhdr.msgctxu.fld.req_idx = cpu_to_le16(ii);
1208 mf->u.frame.hwhdr.msgctxu.fld.cb_idx = cb_idx;
1209 }
1210
1211 /* Make sure there are no doorbells */
1212 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1213
1214 CHIPREG_WRITE32(&ioc->chip->Doorbell,
1215 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
1216 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
1217
1218 /* Wait for IOC doorbell int */
1219 if ((ii = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0) {
1220 return ii;
1221 }
1222
1223 /* Read doorbell and check for active bit */
1224 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
1225 return -5;
1226
1227 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_send_handshake_request start, WaitCnt=%d\n",
1228 ioc->name, ii));
1229
1230 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1231
1232 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1233 return -2;
1234 }
1235
1236 /* Send request via doorbell handshake */
1237 req_as_bytes = (u8 *) req;
1238 for (ii = 0; ii < reqBytes/4; ii++) {
1239 u32 word;
1240
1241 word = ((req_as_bytes[(ii*4) + 0] << 0) |
1242 (req_as_bytes[(ii*4) + 1] << 8) |
1243 (req_as_bytes[(ii*4) + 2] << 16) |
1244 (req_as_bytes[(ii*4) + 3] << 24));
1245 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
1246 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1247 r = -3;
1248 break;
1249 }
1250 }
1251
1252 if (r >= 0 && WaitForDoorbellInt(ioc, 10, sleepFlag) >= 0)
1253 r = 0;
1254 else
1255 r = -4;
1256
1257 /* Make sure there are no doorbells */
1258 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1259
1260 return r;
1261 }
1262
1263 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1264 /**
1265 * mpt_host_page_access_control - control the IOC's Host Page Buffer access
1266 * @ioc: Pointer to MPT adapter structure
1267 * @access_control_value: define bits below
1268 * @sleepFlag: Specifies whether the process can sleep
1269 *
1270 * Provides mechanism for the host driver to control the IOC's
1271 * Host Page Buffer access.
1272 *
1273 * Access Control Value - bits[15:12]
1274 * 0h Reserved
1275 * 1h Enable Access { MPI_DB_HPBAC_ENABLE_ACCESS }
1276 * 2h Disable Access { MPI_DB_HPBAC_DISABLE_ACCESS }
1277 * 3h Free Buffer { MPI_DB_HPBAC_FREE_BUFFER }
1278 *
1279 * Returns 0 for success, non-zero for failure.
1280 */
1281
1282 static int
mpt_host_page_access_control(MPT_ADAPTER * ioc,u8 access_control_value,int sleepFlag)1283 mpt_host_page_access_control(MPT_ADAPTER *ioc, u8 access_control_value, int sleepFlag)
1284 {
1285 int r = 0;
1286
1287 /* return if in use */
1288 if (CHIPREG_READ32(&ioc->chip->Doorbell)
1289 & MPI_DOORBELL_ACTIVE)
1290 return -1;
1291
1292 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1293
1294 CHIPREG_WRITE32(&ioc->chip->Doorbell,
1295 ((MPI_FUNCTION_HOST_PAGEBUF_ACCESS_CONTROL
1296 <<MPI_DOORBELL_FUNCTION_SHIFT) |
1297 (access_control_value<<12)));
1298
1299 /* Wait for IOC to clear Doorbell Status bit */
1300 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0) {
1301 return -2;
1302 }else
1303 return 0;
1304 }
1305
1306 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1307 /**
1308 * mpt_host_page_alloc - allocate system memory for the fw
1309 * @ioc: Pointer to pointer to IOC adapter
1310 * @ioc_init: Pointer to ioc init config page
1311 *
1312 * If we already allocated memory in past, then resend the same pointer.
1313 * Returns 0 for success, non-zero for failure.
1314 */
1315 static int
mpt_host_page_alloc(MPT_ADAPTER * ioc,pIOCInit_t ioc_init)1316 mpt_host_page_alloc(MPT_ADAPTER *ioc, pIOCInit_t ioc_init)
1317 {
1318 char *psge;
1319 int flags_length;
1320 u32 host_page_buffer_sz=0;
1321
1322 if(!ioc->HostPageBuffer) {
1323
1324 host_page_buffer_sz =
1325 le32_to_cpu(ioc->facts.HostPageBufferSGE.FlagsLength) & 0xFFFFFF;
1326
1327 if(!host_page_buffer_sz)
1328 return 0; /* fw doesn't need any host buffers */
1329
1330 /* spin till we get enough memory */
1331 while(host_page_buffer_sz > 0) {
1332
1333 if((ioc->HostPageBuffer = pci_alloc_consistent(
1334 ioc->pcidev,
1335 host_page_buffer_sz,
1336 &ioc->HostPageBuffer_dma)) != NULL) {
1337
1338 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1339 "host_page_buffer @ %p, dma @ %x, sz=%d bytes\n",
1340 ioc->name, ioc->HostPageBuffer,
1341 (u32)ioc->HostPageBuffer_dma,
1342 host_page_buffer_sz));
1343 ioc->alloc_total += host_page_buffer_sz;
1344 ioc->HostPageBuffer_sz = host_page_buffer_sz;
1345 break;
1346 }
1347
1348 host_page_buffer_sz -= (4*1024);
1349 }
1350 }
1351
1352 if(!ioc->HostPageBuffer) {
1353 printk(MYIOC_s_ERR_FMT
1354 "Failed to alloc memory for host_page_buffer!\n",
1355 ioc->name);
1356 return -999;
1357 }
1358
1359 psge = (char *)&ioc_init->HostPageBufferSGE;
1360 flags_length = MPI_SGE_FLAGS_SIMPLE_ELEMENT |
1361 MPI_SGE_FLAGS_SYSTEM_ADDRESS |
1362 MPI_SGE_FLAGS_HOST_TO_IOC |
1363 MPI_SGE_FLAGS_END_OF_BUFFER;
1364 flags_length = flags_length << MPI_SGE_FLAGS_SHIFT;
1365 flags_length |= ioc->HostPageBuffer_sz;
1366 ioc->add_sge(psge, flags_length, ioc->HostPageBuffer_dma);
1367 ioc->facts.HostPageBufferSGE = ioc_init->HostPageBufferSGE;
1368
1369 return 0;
1370 }
1371
1372 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1373 /**
1374 * mpt_verify_adapter - Given IOC identifier, set pointer to its adapter structure.
1375 * @iocid: IOC unique identifier (integer)
1376 * @iocpp: Pointer to pointer to IOC adapter
1377 *
1378 * Given a unique IOC identifier, set pointer to the associated MPT
1379 * adapter structure.
1380 *
1381 * Returns iocid and sets iocpp if iocid is found.
1382 * Returns -1 if iocid is not found.
1383 */
1384 int
mpt_verify_adapter(int iocid,MPT_ADAPTER ** iocpp)1385 mpt_verify_adapter(int iocid, MPT_ADAPTER **iocpp)
1386 {
1387 MPT_ADAPTER *ioc;
1388
1389 list_for_each_entry(ioc,&ioc_list,list) {
1390 if (ioc->id == iocid) {
1391 *iocpp =ioc;
1392 return iocid;
1393 }
1394 }
1395
1396 *iocpp = NULL;
1397 return -1;
1398 }
1399
1400 /**
1401 * mpt_get_product_name - returns product string
1402 * @vendor: pci vendor id
1403 * @device: pci device id
1404 * @revision: pci revision id
1405 * @prod_name: string returned
1406 *
1407 * Returns product string displayed when driver loads,
1408 * in /proc/mpt/summary and /sysfs/class/scsi_host/host<X>/version_product
1409 *
1410 **/
1411 static void
mpt_get_product_name(u16 vendor,u16 device,u8 revision,char * prod_name)1412 mpt_get_product_name(u16 vendor, u16 device, u8 revision, char *prod_name)
1413 {
1414 char *product_str = NULL;
1415
1416 if (vendor == PCI_VENDOR_ID_BROCADE) {
1417 switch (device)
1418 {
1419 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1420 switch (revision)
1421 {
1422 case 0x00:
1423 product_str = "BRE040 A0";
1424 break;
1425 case 0x01:
1426 product_str = "BRE040 A1";
1427 break;
1428 default:
1429 product_str = "BRE040";
1430 break;
1431 }
1432 break;
1433 }
1434 goto out;
1435 }
1436
1437 switch (device)
1438 {
1439 case MPI_MANUFACTPAGE_DEVICEID_FC909:
1440 product_str = "LSIFC909 B1";
1441 break;
1442 case MPI_MANUFACTPAGE_DEVICEID_FC919:
1443 product_str = "LSIFC919 B0";
1444 break;
1445 case MPI_MANUFACTPAGE_DEVICEID_FC929:
1446 product_str = "LSIFC929 B0";
1447 break;
1448 case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1449 if (revision < 0x80)
1450 product_str = "LSIFC919X A0";
1451 else
1452 product_str = "LSIFC919XL A1";
1453 break;
1454 case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1455 if (revision < 0x80)
1456 product_str = "LSIFC929X A0";
1457 else
1458 product_str = "LSIFC929XL A1";
1459 break;
1460 case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1461 product_str = "LSIFC939X A1";
1462 break;
1463 case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1464 product_str = "LSIFC949X A1";
1465 break;
1466 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1467 switch (revision)
1468 {
1469 case 0x00:
1470 product_str = "LSIFC949E A0";
1471 break;
1472 case 0x01:
1473 product_str = "LSIFC949E A1";
1474 break;
1475 default:
1476 product_str = "LSIFC949E";
1477 break;
1478 }
1479 break;
1480 case MPI_MANUFACTPAGE_DEVID_53C1030:
1481 switch (revision)
1482 {
1483 case 0x00:
1484 product_str = "LSI53C1030 A0";
1485 break;
1486 case 0x01:
1487 product_str = "LSI53C1030 B0";
1488 break;
1489 case 0x03:
1490 product_str = "LSI53C1030 B1";
1491 break;
1492 case 0x07:
1493 product_str = "LSI53C1030 B2";
1494 break;
1495 case 0x08:
1496 product_str = "LSI53C1030 C0";
1497 break;
1498 case 0x80:
1499 product_str = "LSI53C1030T A0";
1500 break;
1501 case 0x83:
1502 product_str = "LSI53C1030T A2";
1503 break;
1504 case 0x87:
1505 product_str = "LSI53C1030T A3";
1506 break;
1507 case 0xc1:
1508 product_str = "LSI53C1020A A1";
1509 break;
1510 default:
1511 product_str = "LSI53C1030";
1512 break;
1513 }
1514 break;
1515 case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1516 switch (revision)
1517 {
1518 case 0x03:
1519 product_str = "LSI53C1035 A2";
1520 break;
1521 case 0x04:
1522 product_str = "LSI53C1035 B0";
1523 break;
1524 default:
1525 product_str = "LSI53C1035";
1526 break;
1527 }
1528 break;
1529 case MPI_MANUFACTPAGE_DEVID_SAS1064:
1530 switch (revision)
1531 {
1532 case 0x00:
1533 product_str = "LSISAS1064 A1";
1534 break;
1535 case 0x01:
1536 product_str = "LSISAS1064 A2";
1537 break;
1538 case 0x02:
1539 product_str = "LSISAS1064 A3";
1540 break;
1541 case 0x03:
1542 product_str = "LSISAS1064 A4";
1543 break;
1544 default:
1545 product_str = "LSISAS1064";
1546 break;
1547 }
1548 break;
1549 case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1550 switch (revision)
1551 {
1552 case 0x00:
1553 product_str = "LSISAS1064E A0";
1554 break;
1555 case 0x01:
1556 product_str = "LSISAS1064E B0";
1557 break;
1558 case 0x02:
1559 product_str = "LSISAS1064E B1";
1560 break;
1561 case 0x04:
1562 product_str = "LSISAS1064E B2";
1563 break;
1564 case 0x08:
1565 product_str = "LSISAS1064E B3";
1566 break;
1567 default:
1568 product_str = "LSISAS1064E";
1569 break;
1570 }
1571 break;
1572 case MPI_MANUFACTPAGE_DEVID_SAS1068:
1573 switch (revision)
1574 {
1575 case 0x00:
1576 product_str = "LSISAS1068 A0";
1577 break;
1578 case 0x01:
1579 product_str = "LSISAS1068 B0";
1580 break;
1581 case 0x02:
1582 product_str = "LSISAS1068 B1";
1583 break;
1584 default:
1585 product_str = "LSISAS1068";
1586 break;
1587 }
1588 break;
1589 case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1590 switch (revision)
1591 {
1592 case 0x00:
1593 product_str = "LSISAS1068E A0";
1594 break;
1595 case 0x01:
1596 product_str = "LSISAS1068E B0";
1597 break;
1598 case 0x02:
1599 product_str = "LSISAS1068E B1";
1600 break;
1601 case 0x04:
1602 product_str = "LSISAS1068E B2";
1603 break;
1604 case 0x08:
1605 product_str = "LSISAS1068E B3";
1606 break;
1607 default:
1608 product_str = "LSISAS1068E";
1609 break;
1610 }
1611 break;
1612 case MPI_MANUFACTPAGE_DEVID_SAS1078:
1613 switch (revision)
1614 {
1615 case 0x00:
1616 product_str = "LSISAS1078 A0";
1617 break;
1618 case 0x01:
1619 product_str = "LSISAS1078 B0";
1620 break;
1621 case 0x02:
1622 product_str = "LSISAS1078 C0";
1623 break;
1624 case 0x03:
1625 product_str = "LSISAS1078 C1";
1626 break;
1627 case 0x04:
1628 product_str = "LSISAS1078 C2";
1629 break;
1630 default:
1631 product_str = "LSISAS1078";
1632 break;
1633 }
1634 break;
1635 }
1636
1637 out:
1638 if (product_str)
1639 sprintf(prod_name, "%s", product_str);
1640 }
1641
1642 /**
1643 * mpt_mapresources - map in memory mapped io
1644 * @ioc: Pointer to pointer to IOC adapter
1645 *
1646 **/
1647 static int
mpt_mapresources(MPT_ADAPTER * ioc)1648 mpt_mapresources(MPT_ADAPTER *ioc)
1649 {
1650 u8 __iomem *mem;
1651 int ii;
1652 resource_size_t mem_phys;
1653 unsigned long port;
1654 u32 msize;
1655 u32 psize;
1656 u8 revision;
1657 int r = -ENODEV;
1658 struct pci_dev *pdev;
1659
1660 pdev = ioc->pcidev;
1661 ioc->bars = pci_select_bars(pdev, IORESOURCE_MEM);
1662 if (pci_enable_device_mem(pdev)) {
1663 printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() "
1664 "failed\n", ioc->name);
1665 return r;
1666 }
1667 if (pci_request_selected_regions(pdev, ioc->bars, "mpt")) {
1668 printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with "
1669 "MEM failed\n", ioc->name);
1670 return r;
1671 }
1672
1673 pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
1674
1675 if (sizeof(dma_addr_t) > 4) {
1676 const uint64_t required_mask = dma_get_required_mask
1677 (&pdev->dev);
1678 if (required_mask > DMA_BIT_MASK(32)
1679 && !pci_set_dma_mask(pdev, DMA_BIT_MASK(64))
1680 && !pci_set_consistent_dma_mask(pdev,
1681 DMA_BIT_MASK(64))) {
1682 ioc->dma_mask = DMA_BIT_MASK(64);
1683 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1684 ": 64 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1685 ioc->name));
1686 } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
1687 && !pci_set_consistent_dma_mask(pdev,
1688 DMA_BIT_MASK(32))) {
1689 ioc->dma_mask = DMA_BIT_MASK(32);
1690 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1691 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1692 ioc->name));
1693 } else {
1694 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1695 ioc->name, pci_name(pdev));
1696 pci_release_selected_regions(pdev, ioc->bars);
1697 return r;
1698 }
1699 } else {
1700 if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))
1701 && !pci_set_consistent_dma_mask(pdev,
1702 DMA_BIT_MASK(32))) {
1703 ioc->dma_mask = DMA_BIT_MASK(32);
1704 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
1705 ": 32 BIT PCI BUS DMA ADDRESSING SUPPORTED\n",
1706 ioc->name));
1707 } else {
1708 printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
1709 ioc->name, pci_name(pdev));
1710 pci_release_selected_regions(pdev, ioc->bars);
1711 return r;
1712 }
1713 }
1714
1715 mem_phys = msize = 0;
1716 port = psize = 0;
1717 for (ii = 0; ii < DEVICE_COUNT_RESOURCE; ii++) {
1718 if (pci_resource_flags(pdev, ii) & PCI_BASE_ADDRESS_SPACE_IO) {
1719 if (psize)
1720 continue;
1721 /* Get I/O space! */
1722 port = pci_resource_start(pdev, ii);
1723 psize = pci_resource_len(pdev, ii);
1724 } else {
1725 if (msize)
1726 continue;
1727 /* Get memmap */
1728 mem_phys = pci_resource_start(pdev, ii);
1729 msize = pci_resource_len(pdev, ii);
1730 }
1731 }
1732 ioc->mem_size = msize;
1733
1734 mem = NULL;
1735 /* Get logical ptr for PciMem0 space */
1736 /*mem = ioremap(mem_phys, msize);*/
1737 mem = ioremap(mem_phys, msize);
1738 if (mem == NULL) {
1739 printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter"
1740 " memory!\n", ioc->name);
1741 pci_release_selected_regions(pdev, ioc->bars);
1742 return -EINVAL;
1743 }
1744 ioc->memmap = mem;
1745 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n",
1746 ioc->name, mem, (unsigned long long)mem_phys));
1747
1748 ioc->mem_phys = mem_phys;
1749 ioc->chip = (SYSIF_REGS __iomem *)mem;
1750
1751 /* Save Port IO values in case we need to do downloadboot */
1752 ioc->pio_mem_phys = port;
1753 ioc->pio_chip = (SYSIF_REGS __iomem *)port;
1754
1755 return 0;
1756 }
1757
1758 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1759 /**
1760 * mpt_attach - Install a PCI intelligent MPT adapter.
1761 * @pdev: Pointer to pci_dev structure
1762 * @id: PCI device ID information
1763 *
1764 * This routine performs all the steps necessary to bring the IOC of
1765 * a MPT adapter to a OPERATIONAL state. This includes registering
1766 * memory regions, registering the interrupt, and allocating request
1767 * and reply memory pools.
1768 *
1769 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
1770 * MPT adapter.
1771 *
1772 * Returns 0 for success, non-zero for failure.
1773 *
1774 * TODO: Add support for polled controllers
1775 */
1776 int
mpt_attach(struct pci_dev * pdev,const struct pci_device_id * id)1777 mpt_attach(struct pci_dev *pdev, const struct pci_device_id *id)
1778 {
1779 MPT_ADAPTER *ioc;
1780 u8 cb_idx;
1781 int r = -ENODEV;
1782 u8 revision;
1783 u8 pcixcmd;
1784 static int mpt_ids = 0;
1785 #ifdef CONFIG_PROC_FS
1786 struct proc_dir_entry *dent;
1787 #endif
1788
1789 ioc = kzalloc(sizeof(MPT_ADAPTER), GFP_ATOMIC);
1790 if (ioc == NULL) {
1791 printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");
1792 return -ENOMEM;
1793 }
1794
1795 ioc->id = mpt_ids++;
1796 sprintf(ioc->name, "ioc%d", ioc->id);
1797 dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n"));
1798
1799 /*
1800 * set initial debug level
1801 * (refer to mptdebug.h)
1802 *
1803 */
1804 ioc->debug_level = mpt_debug_level;
1805 if (mpt_debug_level)
1806 printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level);
1807
1808 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name));
1809
1810 ioc->pcidev = pdev;
1811 if (mpt_mapresources(ioc)) {
1812 kfree(ioc);
1813 return r;
1814 }
1815
1816 /*
1817 * Setting up proper handlers for scatter gather handling
1818 */
1819 if (ioc->dma_mask == DMA_BIT_MASK(64)) {
1820 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
1821 ioc->add_sge = &mpt_add_sge_64bit_1078;
1822 else
1823 ioc->add_sge = &mpt_add_sge_64bit;
1824 ioc->add_chain = &mpt_add_chain_64bit;
1825 ioc->sg_addr_size = 8;
1826 } else {
1827 ioc->add_sge = &mpt_add_sge;
1828 ioc->add_chain = &mpt_add_chain;
1829 ioc->sg_addr_size = 4;
1830 }
1831 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
1832
1833 ioc->alloc_total = sizeof(MPT_ADAPTER);
1834 ioc->req_sz = MPT_DEFAULT_FRAME_SIZE; /* avoid div by zero! */
1835 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
1836
1837
1838 spin_lock_init(&ioc->taskmgmt_lock);
1839 mutex_init(&ioc->internal_cmds.mutex);
1840 init_completion(&ioc->internal_cmds.done);
1841 mutex_init(&ioc->mptbase_cmds.mutex);
1842 init_completion(&ioc->mptbase_cmds.done);
1843 mutex_init(&ioc->taskmgmt_cmds.mutex);
1844 init_completion(&ioc->taskmgmt_cmds.done);
1845
1846 /* Initialize the event logging.
1847 */
1848 ioc->eventTypes = 0; /* None */
1849 ioc->eventContext = 0;
1850 ioc->eventLogSize = 0;
1851 ioc->events = NULL;
1852
1853 #ifdef MFCNT
1854 ioc->mfcnt = 0;
1855 #endif
1856
1857 ioc->sh = NULL;
1858 ioc->cached_fw = NULL;
1859
1860 /* Initialize SCSI Config Data structure
1861 */
1862 memset(&ioc->spi_data, 0, sizeof(SpiCfgData));
1863
1864 /* Initialize the fc rport list head.
1865 */
1866 INIT_LIST_HEAD(&ioc->fc_rports);
1867
1868 /* Find lookup slot. */
1869 INIT_LIST_HEAD(&ioc->list);
1870
1871
1872 /* Initialize workqueue */
1873 INIT_DELAYED_WORK(&ioc->fault_reset_work, mpt_fault_reset_work);
1874
1875 snprintf(ioc->reset_work_q_name, MPT_KOBJ_NAME_LEN,
1876 "mpt_poll_%d", ioc->id);
1877 ioc->reset_work_q =
1878 create_singlethread_workqueue(ioc->reset_work_q_name);
1879 if (!ioc->reset_work_q) {
1880 printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
1881 ioc->name);
1882 pci_release_selected_regions(pdev, ioc->bars);
1883 kfree(ioc);
1884 return -ENOMEM;
1885 }
1886
1887 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n",
1888 ioc->name, &ioc->facts, &ioc->pfacts[0]));
1889
1890 pci_read_config_byte(pdev, PCI_CLASS_REVISION, &revision);
1891 mpt_get_product_name(pdev->vendor, pdev->device, revision, ioc->prod_name);
1892
1893 switch (pdev->device)
1894 {
1895 case MPI_MANUFACTPAGE_DEVICEID_FC939X:
1896 case MPI_MANUFACTPAGE_DEVICEID_FC949X:
1897 ioc->errata_flag_1064 = 1;
1898 case MPI_MANUFACTPAGE_DEVICEID_FC909:
1899 case MPI_MANUFACTPAGE_DEVICEID_FC929:
1900 case MPI_MANUFACTPAGE_DEVICEID_FC919:
1901 case MPI_MANUFACTPAGE_DEVICEID_FC949E:
1902 ioc->bus_type = FC;
1903 break;
1904
1905 case MPI_MANUFACTPAGE_DEVICEID_FC929X:
1906 if (revision < XL_929) {
1907 /* 929X Chip Fix. Set Split transactions level
1908 * for PCIX. Set MOST bits to zero.
1909 */
1910 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1911 pcixcmd &= 0x8F;
1912 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1913 } else {
1914 /* 929XL Chip Fix. Set MMRBC to 0x08.
1915 */
1916 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1917 pcixcmd |= 0x08;
1918 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1919 }
1920 ioc->bus_type = FC;
1921 break;
1922
1923 case MPI_MANUFACTPAGE_DEVICEID_FC919X:
1924 /* 919X Chip Fix. Set Split transactions level
1925 * for PCIX. Set MOST bits to zero.
1926 */
1927 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1928 pcixcmd &= 0x8F;
1929 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1930 ioc->bus_type = FC;
1931 break;
1932
1933 case MPI_MANUFACTPAGE_DEVID_53C1030:
1934 /* 1030 Chip Fix. Disable Split transactions
1935 * for PCIX. Set MOST bits to zero if Rev < C0( = 8).
1936 */
1937 if (revision < C0_1030) {
1938 pci_read_config_byte(pdev, 0x6a, &pcixcmd);
1939 pcixcmd &= 0x8F;
1940 pci_write_config_byte(pdev, 0x6a, pcixcmd);
1941 }
1942
1943 case MPI_MANUFACTPAGE_DEVID_1030_53C1035:
1944 ioc->bus_type = SPI;
1945 break;
1946
1947 case MPI_MANUFACTPAGE_DEVID_SAS1064:
1948 case MPI_MANUFACTPAGE_DEVID_SAS1068:
1949 ioc->errata_flag_1064 = 1;
1950 ioc->bus_type = SAS;
1951 break;
1952
1953 case MPI_MANUFACTPAGE_DEVID_SAS1064E:
1954 case MPI_MANUFACTPAGE_DEVID_SAS1068E:
1955 case MPI_MANUFACTPAGE_DEVID_SAS1078:
1956 ioc->bus_type = SAS;
1957 break;
1958 }
1959
1960
1961 switch (ioc->bus_type) {
1962
1963 case SAS:
1964 ioc->msi_enable = mpt_msi_enable_sas;
1965 break;
1966
1967 case SPI:
1968 ioc->msi_enable = mpt_msi_enable_spi;
1969 break;
1970
1971 case FC:
1972 ioc->msi_enable = mpt_msi_enable_fc;
1973 break;
1974
1975 default:
1976 ioc->msi_enable = 0;
1977 break;
1978 }
1979
1980 ioc->fw_events_off = 1;
1981
1982 if (ioc->errata_flag_1064)
1983 pci_disable_io_access(pdev);
1984
1985 spin_lock_init(&ioc->FreeQlock);
1986
1987 /* Disable all! */
1988 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
1989 ioc->active = 0;
1990 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
1991
1992 /* Set IOC ptr in the pcidev's driver data. */
1993 pci_set_drvdata(ioc->pcidev, ioc);
1994
1995 /* Set lookup ptr. */
1996 list_add_tail(&ioc->list, &ioc_list);
1997
1998 /* Check for "bound ports" (929, 929X, 1030, 1035) to reduce redundant resets.
1999 */
2000 mpt_detect_bound_ports(ioc, pdev);
2001
2002 INIT_LIST_HEAD(&ioc->fw_event_list);
2003 spin_lock_init(&ioc->fw_event_lock);
2004 snprintf(ioc->fw_event_q_name, MPT_KOBJ_NAME_LEN, "mpt/%d", ioc->id);
2005 ioc->fw_event_q = create_singlethread_workqueue(ioc->fw_event_q_name);
2006
2007 if ((r = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
2008 CAN_SLEEP)) != 0){
2009 printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n",
2010 ioc->name, r);
2011
2012 list_del(&ioc->list);
2013 if (ioc->alt_ioc)
2014 ioc->alt_ioc->alt_ioc = NULL;
2015 iounmap(ioc->memmap);
2016 if (r != -5)
2017 pci_release_selected_regions(pdev, ioc->bars);
2018
2019 destroy_workqueue(ioc->reset_work_q);
2020 ioc->reset_work_q = NULL;
2021
2022 kfree(ioc);
2023 pci_set_drvdata(pdev, NULL);
2024 return r;
2025 }
2026
2027 /* call per device driver probe entry point */
2028 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2029 if(MptDeviceDriverHandlers[cb_idx] &&
2030 MptDeviceDriverHandlers[cb_idx]->probe) {
2031 MptDeviceDriverHandlers[cb_idx]->probe(pdev,id);
2032 }
2033 }
2034
2035 #ifdef CONFIG_PROC_FS
2036 /*
2037 * Create "/proc/mpt/iocN" subdirectory entry for each MPT adapter.
2038 */
2039 dent = proc_mkdir(ioc->name, mpt_proc_root_dir);
2040 if (dent) {
2041 proc_create_data("info", S_IRUGO, dent, &mpt_iocinfo_proc_fops, ioc);
2042 proc_create_data("summary", S_IRUGO, dent, &mpt_summary_proc_fops, ioc);
2043 }
2044 #endif
2045
2046 if (!ioc->alt_ioc)
2047 queue_delayed_work(ioc->reset_work_q, &ioc->fault_reset_work,
2048 msecs_to_jiffies(MPT_POLLING_INTERVAL));
2049
2050 return 0;
2051 }
2052
2053 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2054 /**
2055 * mpt_detach - Remove a PCI intelligent MPT adapter.
2056 * @pdev: Pointer to pci_dev structure
2057 */
2058
2059 void
mpt_detach(struct pci_dev * pdev)2060 mpt_detach(struct pci_dev *pdev)
2061 {
2062 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2063 char pname[32];
2064 u8 cb_idx;
2065 unsigned long flags;
2066 struct workqueue_struct *wq;
2067
2068 /*
2069 * Stop polling ioc for fault condition
2070 */
2071 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
2072 wq = ioc->reset_work_q;
2073 ioc->reset_work_q = NULL;
2074 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
2075 cancel_delayed_work(&ioc->fault_reset_work);
2076 destroy_workqueue(wq);
2077
2078 spin_lock_irqsave(&ioc->fw_event_lock, flags);
2079 wq = ioc->fw_event_q;
2080 ioc->fw_event_q = NULL;
2081 spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
2082 destroy_workqueue(wq);
2083
2084 sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/summary", ioc->name);
2085 remove_proc_entry(pname, NULL);
2086 sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s/info", ioc->name);
2087 remove_proc_entry(pname, NULL);
2088 sprintf(pname, MPT_PROCFS_MPTBASEDIR "/%s", ioc->name);
2089 remove_proc_entry(pname, NULL);
2090
2091 /* call per device driver remove entry point */
2092 for(cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
2093 if(MptDeviceDriverHandlers[cb_idx] &&
2094 MptDeviceDriverHandlers[cb_idx]->remove) {
2095 MptDeviceDriverHandlers[cb_idx]->remove(pdev);
2096 }
2097 }
2098
2099 /* Disable interrupts! */
2100 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2101
2102 ioc->active = 0;
2103 synchronize_irq(pdev->irq);
2104
2105 /* Clear any lingering interrupt */
2106 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2107
2108 CHIPREG_READ32(&ioc->chip->IntStatus);
2109
2110 mpt_adapter_dispose(ioc);
2111
2112 }
2113
2114 /**************************************************************************
2115 * Power Management
2116 */
2117 #ifdef CONFIG_PM
2118 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2119 /**
2120 * mpt_suspend - Fusion MPT base driver suspend routine.
2121 * @pdev: Pointer to pci_dev structure
2122 * @state: new state to enter
2123 */
2124 int
mpt_suspend(struct pci_dev * pdev,pm_message_t state)2125 mpt_suspend(struct pci_dev *pdev, pm_message_t state)
2126 {
2127 u32 device_state;
2128 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2129
2130 device_state = pci_choose_state(pdev, state);
2131 printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering "
2132 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2133 device_state);
2134
2135 /* put ioc into READY_STATE */
2136 if(SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, CAN_SLEEP)) {
2137 printk(MYIOC_s_ERR_FMT
2138 "pci-suspend: IOC msg unit reset failed!\n", ioc->name);
2139 }
2140
2141 /* disable interrupts */
2142 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2143 ioc->active = 0;
2144
2145 /* Clear any lingering interrupt */
2146 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2147
2148 free_irq(ioc->pci_irq, ioc);
2149 if (ioc->msi_enable)
2150 pci_disable_msi(ioc->pcidev);
2151 ioc->pci_irq = -1;
2152 pci_save_state(pdev);
2153 pci_disable_device(pdev);
2154 pci_release_selected_regions(pdev, ioc->bars);
2155 pci_set_power_state(pdev, device_state);
2156 return 0;
2157 }
2158
2159 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2160 /**
2161 * mpt_resume - Fusion MPT base driver resume routine.
2162 * @pdev: Pointer to pci_dev structure
2163 */
2164 int
mpt_resume(struct pci_dev * pdev)2165 mpt_resume(struct pci_dev *pdev)
2166 {
2167 MPT_ADAPTER *ioc = pci_get_drvdata(pdev);
2168 u32 device_state = pdev->current_state;
2169 int recovery_state;
2170 int err;
2171
2172 printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous "
2173 "operating state [D%d]\n", ioc->name, pdev, pci_name(pdev),
2174 device_state);
2175
2176 pci_set_power_state(pdev, PCI_D0);
2177 pci_enable_wake(pdev, PCI_D0, 0);
2178 pci_restore_state(pdev);
2179 ioc->pcidev = pdev;
2180 err = mpt_mapresources(ioc);
2181 if (err)
2182 return err;
2183
2184 if (ioc->dma_mask == DMA_BIT_MASK(64)) {
2185 if (pdev->device == MPI_MANUFACTPAGE_DEVID_SAS1078)
2186 ioc->add_sge = &mpt_add_sge_64bit_1078;
2187 else
2188 ioc->add_sge = &mpt_add_sge_64bit;
2189 ioc->add_chain = &mpt_add_chain_64bit;
2190 ioc->sg_addr_size = 8;
2191 } else {
2192
2193 ioc->add_sge = &mpt_add_sge;
2194 ioc->add_chain = &mpt_add_chain;
2195 ioc->sg_addr_size = 4;
2196 }
2197 ioc->SGE_size = sizeof(u32) + ioc->sg_addr_size;
2198
2199 printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
2200 ioc->name, (mpt_GetIocState(ioc, 1) >> MPI_IOC_STATE_SHIFT),
2201 CHIPREG_READ32(&ioc->chip->Doorbell));
2202
2203 /*
2204 * Errata workaround for SAS pci express:
2205 * Upon returning to the D0 state, the contents of the doorbell will be
2206 * stale data, and this will incorrectly signal to the host driver that
2207 * the firmware is ready to process mpt commands. The workaround is
2208 * to issue a diagnostic reset.
2209 */
2210 if (ioc->bus_type == SAS && (pdev->device ==
2211 MPI_MANUFACTPAGE_DEVID_SAS1068E || pdev->device ==
2212 MPI_MANUFACTPAGE_DEVID_SAS1064E)) {
2213 if (KickStart(ioc, 1, CAN_SLEEP) < 0) {
2214 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n",
2215 ioc->name);
2216 goto out;
2217 }
2218 }
2219
2220 /* bring ioc to operational state */
2221 printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name);
2222 recovery_state = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_BRINGUP,
2223 CAN_SLEEP);
2224 if (recovery_state != 0)
2225 printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, "
2226 "error:[%x]\n", ioc->name, recovery_state);
2227 else
2228 printk(MYIOC_s_INFO_FMT
2229 "pci-resume: success\n", ioc->name);
2230 out:
2231 return 0;
2232
2233 }
2234 #endif
2235
2236 static int
mpt_signal_reset(u8 index,MPT_ADAPTER * ioc,int reset_phase)2237 mpt_signal_reset(u8 index, MPT_ADAPTER *ioc, int reset_phase)
2238 {
2239 if ((MptDriverClass[index] == MPTSPI_DRIVER &&
2240 ioc->bus_type != SPI) ||
2241 (MptDriverClass[index] == MPTFC_DRIVER &&
2242 ioc->bus_type != FC) ||
2243 (MptDriverClass[index] == MPTSAS_DRIVER &&
2244 ioc->bus_type != SAS))
2245 /* make sure we only call the relevant reset handler
2246 * for the bus */
2247 return 0;
2248 return (MptResetHandlers[index])(ioc, reset_phase);
2249 }
2250
2251 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2252 /**
2253 * mpt_do_ioc_recovery - Initialize or recover MPT adapter.
2254 * @ioc: Pointer to MPT adapter structure
2255 * @reason: Event word / reason
2256 * @sleepFlag: Use schedule if CAN_SLEEP else use udelay.
2257 *
2258 * This routine performs all the steps necessary to bring the IOC
2259 * to a OPERATIONAL state.
2260 *
2261 * This routine also pre-fetches the LAN MAC address of a Fibre Channel
2262 * MPT adapter.
2263 *
2264 * Returns:
2265 * 0 for success
2266 * -1 if failed to get board READY
2267 * -2 if READY but IOCFacts Failed
2268 * -3 if READY but PrimeIOCFifos Failed
2269 * -4 if READY but IOCInit Failed
2270 * -5 if failed to enable_device and/or request_selected_regions
2271 * -6 if failed to upload firmware
2272 */
2273 static int
mpt_do_ioc_recovery(MPT_ADAPTER * ioc,u32 reason,int sleepFlag)2274 mpt_do_ioc_recovery(MPT_ADAPTER *ioc, u32 reason, int sleepFlag)
2275 {
2276 int hard_reset_done = 0;
2277 int alt_ioc_ready = 0;
2278 int hard;
2279 int rc=0;
2280 int ii;
2281 int ret = 0;
2282 int reset_alt_ioc_active = 0;
2283 int irq_allocated = 0;
2284 u8 *a;
2285
2286 printk(MYIOC_s_INFO_FMT "Initiating %s\n", ioc->name,
2287 reason == MPT_HOSTEVENT_IOC_BRINGUP ? "bringup" : "recovery");
2288
2289 /* Disable reply interrupts (also blocks FreeQ) */
2290 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2291 ioc->active = 0;
2292
2293 if (ioc->alt_ioc) {
2294 if (ioc->alt_ioc->active ||
2295 reason == MPT_HOSTEVENT_IOC_RECOVER) {
2296 reset_alt_ioc_active = 1;
2297 /* Disable alt-IOC's reply interrupts
2298 * (and FreeQ) for a bit
2299 **/
2300 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2301 0xFFFFFFFF);
2302 ioc->alt_ioc->active = 0;
2303 }
2304 }
2305
2306 hard = 1;
2307 if (reason == MPT_HOSTEVENT_IOC_BRINGUP)
2308 hard = 0;
2309
2310 if ((hard_reset_done = MakeIocReady(ioc, hard, sleepFlag)) < 0) {
2311 if (hard_reset_done == -4) {
2312 printk(MYIOC_s_WARN_FMT "Owned by PEER..skipping!\n",
2313 ioc->name);
2314
2315 if (reset_alt_ioc_active && ioc->alt_ioc) {
2316 /* (re)Enable alt-IOC! (reply interrupt, FreeQ) */
2317 dprintk(ioc, printk(MYIOC_s_INFO_FMT
2318 "alt_ioc reply irq re-enabled\n", ioc->alt_ioc->name));
2319 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask, MPI_HIM_DIM);
2320 ioc->alt_ioc->active = 1;
2321 }
2322
2323 } else {
2324 printk(MYIOC_s_WARN_FMT
2325 "NOT READY WARNING!\n", ioc->name);
2326 }
2327 ret = -1;
2328 goto out;
2329 }
2330
2331 /* hard_reset_done = 0 if a soft reset was performed
2332 * and 1 if a hard reset was performed.
2333 */
2334 if (hard_reset_done && reset_alt_ioc_active && ioc->alt_ioc) {
2335 if ((rc = MakeIocReady(ioc->alt_ioc, 0, sleepFlag)) == 0)
2336 alt_ioc_ready = 1;
2337 else
2338 printk(MYIOC_s_WARN_FMT
2339 ": alt-ioc Not ready WARNING!\n",
2340 ioc->alt_ioc->name);
2341 }
2342
2343 for (ii=0; ii<5; ii++) {
2344 /* Get IOC facts! Allow 5 retries */
2345 if ((rc = GetIocFacts(ioc, sleepFlag, reason)) == 0)
2346 break;
2347 }
2348
2349
2350 if (ii == 5) {
2351 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2352 "Retry IocFacts failed rc=%x\n", ioc->name, rc));
2353 ret = -2;
2354 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2355 MptDisplayIocCapabilities(ioc);
2356 }
2357
2358 if (alt_ioc_ready) {
2359 if ((rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason)) != 0) {
2360 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2361 "Initial Alt IocFacts failed rc=%x\n",
2362 ioc->name, rc));
2363 /* Retry - alt IOC was initialized once
2364 */
2365 rc = GetIocFacts(ioc->alt_ioc, sleepFlag, reason);
2366 }
2367 if (rc) {
2368 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2369 "Retry Alt IocFacts failed rc=%x\n", ioc->name, rc));
2370 alt_ioc_ready = 0;
2371 reset_alt_ioc_active = 0;
2372 } else if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
2373 MptDisplayIocCapabilities(ioc->alt_ioc);
2374 }
2375 }
2376
2377 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP) &&
2378 (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)) {
2379 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2380 ioc->bars = pci_select_bars(ioc->pcidev, IORESOURCE_MEM |
2381 IORESOURCE_IO);
2382 if (pci_enable_device(ioc->pcidev))
2383 return -5;
2384 if (pci_request_selected_regions(ioc->pcidev, ioc->bars,
2385 "mpt"))
2386 return -5;
2387 }
2388
2389 /*
2390 * Device is reset now. It must have de-asserted the interrupt line
2391 * (if it was asserted) and it should be safe to register for the
2392 * interrupt now.
2393 */
2394 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2395 ioc->pci_irq = -1;
2396 if (ioc->pcidev->irq) {
2397 if (ioc->msi_enable && !pci_enable_msi(ioc->pcidev))
2398 printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n",
2399 ioc->name);
2400 else
2401 ioc->msi_enable = 0;
2402 rc = request_irq(ioc->pcidev->irq, mpt_interrupt,
2403 IRQF_SHARED, ioc->name, ioc);
2404 if (rc < 0) {
2405 printk(MYIOC_s_ERR_FMT "Unable to allocate "
2406 "interrupt %d!\n",
2407 ioc->name, ioc->pcidev->irq);
2408 if (ioc->msi_enable)
2409 pci_disable_msi(ioc->pcidev);
2410 ret = -EBUSY;
2411 goto out;
2412 }
2413 irq_allocated = 1;
2414 ioc->pci_irq = ioc->pcidev->irq;
2415 pci_set_master(ioc->pcidev); /* ?? */
2416 pci_set_drvdata(ioc->pcidev, ioc);
2417 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2418 "installed at interrupt %d\n", ioc->name,
2419 ioc->pcidev->irq));
2420 }
2421 }
2422
2423 /* Prime reply & request queues!
2424 * (mucho alloc's) Must be done prior to
2425 * init as upper addresses are needed for init.
2426 * If fails, continue with alt-ioc processing
2427 */
2428 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n",
2429 ioc->name));
2430 if ((ret == 0) && ((rc = PrimeIocFifos(ioc)) != 0))
2431 ret = -3;
2432
2433 /* May need to check/upload firmware & data here!
2434 * If fails, continue with alt-ioc processing
2435 */
2436 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n",
2437 ioc->name));
2438 if ((ret == 0) && ((rc = SendIocInit(ioc, sleepFlag)) != 0))
2439 ret = -4;
2440 // NEW!
2441 if (alt_ioc_ready && ((rc = PrimeIocFifos(ioc->alt_ioc)) != 0)) {
2442 printk(MYIOC_s_WARN_FMT
2443 ": alt-ioc (%d) FIFO mgmt alloc WARNING!\n",
2444 ioc->alt_ioc->name, rc);
2445 alt_ioc_ready = 0;
2446 reset_alt_ioc_active = 0;
2447 }
2448
2449 if (alt_ioc_ready) {
2450 if ((rc = SendIocInit(ioc->alt_ioc, sleepFlag)) != 0) {
2451 alt_ioc_ready = 0;
2452 reset_alt_ioc_active = 0;
2453 printk(MYIOC_s_WARN_FMT
2454 ": alt-ioc: (%d) init failure WARNING!\n",
2455 ioc->alt_ioc->name, rc);
2456 }
2457 }
2458
2459 if (reason == MPT_HOSTEVENT_IOC_BRINGUP){
2460 if (ioc->upload_fw) {
2461 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2462 "firmware upload required!\n", ioc->name));
2463
2464 /* Controller is not operational, cannot do upload
2465 */
2466 if (ret == 0) {
2467 rc = mpt_do_upload(ioc, sleepFlag);
2468 if (rc == 0) {
2469 if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
2470 /*
2471 * Maintain only one pointer to FW memory
2472 * so there will not be two attempt to
2473 * downloadboot onboard dual function
2474 * chips (mpt_adapter_disable,
2475 * mpt_diag_reset)
2476 */
2477 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2478 "mpt_upload: alt_%s has cached_fw=%p \n",
2479 ioc->name, ioc->alt_ioc->name, ioc->alt_ioc->cached_fw));
2480 ioc->cached_fw = NULL;
2481 }
2482 } else {
2483 printk(MYIOC_s_WARN_FMT
2484 "firmware upload failure!\n", ioc->name);
2485 ret = -6;
2486 }
2487 }
2488 }
2489 }
2490
2491 /* Enable MPT base driver management of EventNotification
2492 * and EventAck handling.
2493 */
2494 if ((ret == 0) && (!ioc->facts.EventState)) {
2495 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2496 "SendEventNotification\n",
2497 ioc->name));
2498 ret = SendEventNotification(ioc, 1, sleepFlag); /* 1=Enable */
2499 }
2500
2501 if (ioc->alt_ioc && alt_ioc_ready && !ioc->alt_ioc->facts.EventState)
2502 rc = SendEventNotification(ioc->alt_ioc, 1, sleepFlag);
2503
2504 if (ret == 0) {
2505 /* Enable! (reply interrupt) */
2506 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
2507 ioc->active = 1;
2508 }
2509 if (rc == 0) { /* alt ioc */
2510 if (reset_alt_ioc_active && ioc->alt_ioc) {
2511 /* (re)Enable alt-IOC! (reply interrupt) */
2512 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc"
2513 "reply irq re-enabled\n",
2514 ioc->alt_ioc->name));
2515 CHIPREG_WRITE32(&ioc->alt_ioc->chip->IntMask,
2516 MPI_HIM_DIM);
2517 ioc->alt_ioc->active = 1;
2518 }
2519 }
2520
2521
2522 /* Add additional "reason" check before call to GetLanConfigPages
2523 * (combined with GetIoUnitPage2 call). This prevents a somewhat
2524 * recursive scenario; GetLanConfigPages times out, timer expired
2525 * routine calls HardResetHandler, which calls into here again,
2526 * and we try GetLanConfigPages again...
2527 */
2528 if ((ret == 0) && (reason == MPT_HOSTEVENT_IOC_BRINGUP)) {
2529
2530 /*
2531 * Initialize link list for inactive raid volumes.
2532 */
2533 mutex_init(&ioc->raid_data.inactive_list_mutex);
2534 INIT_LIST_HEAD(&ioc->raid_data.inactive_list);
2535
2536 switch (ioc->bus_type) {
2537
2538 case SAS:
2539 /* clear persistency table */
2540 if(ioc->facts.IOCExceptions &
2541 MPI_IOCFACTS_EXCEPT_PERSISTENT_TABLE_FULL) {
2542 ret = mptbase_sas_persist_operation(ioc,
2543 MPI_SAS_OP_CLEAR_NOT_PRESENT);
2544 if(ret != 0)
2545 goto out;
2546 }
2547
2548 /* Find IM volumes
2549 */
2550 mpt_findImVolumes(ioc);
2551
2552 /* Check, and possibly reset, the coalescing value
2553 */
2554 mpt_read_ioc_pg_1(ioc);
2555
2556 break;
2557
2558 case FC:
2559 if ((ioc->pfacts[0].ProtocolFlags &
2560 MPI_PORTFACTS_PROTOCOL_LAN) &&
2561 (ioc->lan_cnfg_page0.Header.PageLength == 0)) {
2562 /*
2563 * Pre-fetch the ports LAN MAC address!
2564 * (LANPage1_t stuff)
2565 */
2566 (void) GetLanConfigPages(ioc);
2567 a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
2568 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2569 "LanAddr = %02X:%02X:%02X"
2570 ":%02X:%02X:%02X\n",
2571 ioc->name, a[5], a[4],
2572 a[3], a[2], a[1], a[0]));
2573 }
2574 break;
2575
2576 case SPI:
2577 /* Get NVRAM and adapter maximums from SPP 0 and 2
2578 */
2579 mpt_GetScsiPortSettings(ioc, 0);
2580
2581 /* Get version and length of SDP 1
2582 */
2583 mpt_readScsiDevicePageHeaders(ioc, 0);
2584
2585 /* Find IM volumes
2586 */
2587 if (ioc->facts.MsgVersion >= MPI_VERSION_01_02)
2588 mpt_findImVolumes(ioc);
2589
2590 /* Check, and possibly reset, the coalescing value
2591 */
2592 mpt_read_ioc_pg_1(ioc);
2593
2594 mpt_read_ioc_pg_4(ioc);
2595
2596 break;
2597 }
2598
2599 GetIoUnitPage2(ioc);
2600 mpt_get_manufacturing_pg_0(ioc);
2601 }
2602
2603 out:
2604 if ((ret != 0) && irq_allocated) {
2605 free_irq(ioc->pci_irq, ioc);
2606 if (ioc->msi_enable)
2607 pci_disable_msi(ioc->pcidev);
2608 }
2609 return ret;
2610 }
2611
2612 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2613 /**
2614 * mpt_detect_bound_ports - Search for matching PCI bus/dev_function
2615 * @ioc: Pointer to MPT adapter structure
2616 * @pdev: Pointer to (struct pci_dev) structure
2617 *
2618 * Search for PCI bus/dev_function which matches
2619 * PCI bus/dev_function (+/-1) for newly discovered 929,
2620 * 929X, 1030 or 1035.
2621 *
2622 * If match on PCI dev_function +/-1 is found, bind the two MPT adapters
2623 * using alt_ioc pointer fields in their %MPT_ADAPTER structures.
2624 */
2625 static void
mpt_detect_bound_ports(MPT_ADAPTER * ioc,struct pci_dev * pdev)2626 mpt_detect_bound_ports(MPT_ADAPTER *ioc, struct pci_dev *pdev)
2627 {
2628 struct pci_dev *peer=NULL;
2629 unsigned int slot = PCI_SLOT(pdev->devfn);
2630 unsigned int func = PCI_FUNC(pdev->devfn);
2631 MPT_ADAPTER *ioc_srch;
2632
2633 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PCI device %s devfn=%x/%x,"
2634 " searching for devfn match on %x or %x\n",
2635 ioc->name, pci_name(pdev), pdev->bus->number,
2636 pdev->devfn, func-1, func+1));
2637
2638 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func-1));
2639 if (!peer) {
2640 peer = pci_get_slot(pdev->bus, PCI_DEVFN(slot,func+1));
2641 if (!peer)
2642 return;
2643 }
2644
2645 list_for_each_entry(ioc_srch, &ioc_list, list) {
2646 struct pci_dev *_pcidev = ioc_srch->pcidev;
2647 if (_pcidev == peer) {
2648 /* Paranoia checks */
2649 if (ioc->alt_ioc != NULL) {
2650 printk(MYIOC_s_WARN_FMT
2651 "Oops, already bound (%s <==> %s)!\n",
2652 ioc->name, ioc->name, ioc->alt_ioc->name);
2653 break;
2654 } else if (ioc_srch->alt_ioc != NULL) {
2655 printk(MYIOC_s_WARN_FMT
2656 "Oops, already bound (%s <==> %s)!\n",
2657 ioc_srch->name, ioc_srch->name,
2658 ioc_srch->alt_ioc->name);
2659 break;
2660 }
2661 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2662 "FOUND! binding %s <==> %s\n",
2663 ioc->name, ioc->name, ioc_srch->name));
2664 ioc_srch->alt_ioc = ioc;
2665 ioc->alt_ioc = ioc_srch;
2666 }
2667 }
2668 pci_dev_put(peer);
2669 }
2670
2671 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2672 /**
2673 * mpt_adapter_disable - Disable misbehaving MPT adapter.
2674 * @ioc: Pointer to MPT adapter structure
2675 */
2676 static void
mpt_adapter_disable(MPT_ADAPTER * ioc)2677 mpt_adapter_disable(MPT_ADAPTER *ioc)
2678 {
2679 int sz;
2680 int ret;
2681
2682 if (ioc->cached_fw != NULL) {
2683 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2684 "%s: Pushing FW onto adapter\n", __func__, ioc->name));
2685 if ((ret = mpt_downloadboot(ioc, (MpiFwHeader_t *)
2686 ioc->cached_fw, CAN_SLEEP)) < 0) {
2687 printk(MYIOC_s_WARN_FMT
2688 ": firmware downloadboot failure (%d)!\n",
2689 ioc->name, ret);
2690 }
2691 }
2692
2693 /*
2694 * Put the controller into ready state (if its not already)
2695 */
2696 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY) {
2697 if (!SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET,
2698 CAN_SLEEP)) {
2699 if (mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_READY)
2700 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit "
2701 "reset failed to put ioc in ready state!\n",
2702 ioc->name, __func__);
2703 } else
2704 printk(MYIOC_s_ERR_FMT "%s: IOC msg unit reset "
2705 "failed!\n", ioc->name, __func__);
2706 }
2707
2708
2709 /* Disable adapter interrupts! */
2710 synchronize_irq(ioc->pcidev->irq);
2711 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
2712 ioc->active = 0;
2713
2714 /* Clear any lingering interrupt */
2715 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
2716 CHIPREG_READ32(&ioc->chip->IntStatus);
2717
2718 if (ioc->alloc != NULL) {
2719 sz = ioc->alloc_sz;
2720 dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "free @ %p, sz=%d bytes\n",
2721 ioc->name, ioc->alloc, ioc->alloc_sz));
2722 pci_free_consistent(ioc->pcidev, sz,
2723 ioc->alloc, ioc->alloc_dma);
2724 ioc->reply_frames = NULL;
2725 ioc->req_frames = NULL;
2726 ioc->alloc = NULL;
2727 ioc->alloc_total -= sz;
2728 }
2729
2730 if (ioc->sense_buf_pool != NULL) {
2731 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
2732 pci_free_consistent(ioc->pcidev, sz,
2733 ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
2734 ioc->sense_buf_pool = NULL;
2735 ioc->alloc_total -= sz;
2736 }
2737
2738 if (ioc->events != NULL){
2739 sz = MPTCTL_EVENT_LOG_SIZE * sizeof(MPT_IOCTL_EVENTS);
2740 kfree(ioc->events);
2741 ioc->events = NULL;
2742 ioc->alloc_total -= sz;
2743 }
2744
2745 mpt_free_fw_memory(ioc);
2746
2747 kfree(ioc->spi_data.nvram);
2748 mpt_inactive_raid_list_free(ioc);
2749 kfree(ioc->raid_data.pIocPg2);
2750 kfree(ioc->raid_data.pIocPg3);
2751 ioc->spi_data.nvram = NULL;
2752 ioc->raid_data.pIocPg3 = NULL;
2753
2754 if (ioc->spi_data.pIocPg4 != NULL) {
2755 sz = ioc->spi_data.IocPg4Sz;
2756 pci_free_consistent(ioc->pcidev, sz,
2757 ioc->spi_data.pIocPg4,
2758 ioc->spi_data.IocPg4_dma);
2759 ioc->spi_data.pIocPg4 = NULL;
2760 ioc->alloc_total -= sz;
2761 }
2762
2763 if (ioc->ReqToChain != NULL) {
2764 kfree(ioc->ReqToChain);
2765 kfree(ioc->RequestNB);
2766 ioc->ReqToChain = NULL;
2767 }
2768
2769 kfree(ioc->ChainToChain);
2770 ioc->ChainToChain = NULL;
2771
2772 if (ioc->HostPageBuffer != NULL) {
2773 if((ret = mpt_host_page_access_control(ioc,
2774 MPI_DB_HPBAC_FREE_BUFFER, NO_SLEEP)) != 0) {
2775 printk(MYIOC_s_ERR_FMT
2776 ": %s: host page buffers free failed (%d)!\n",
2777 ioc->name, __func__, ret);
2778 }
2779 dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
2780 "HostPageBuffer free @ %p, sz=%d bytes\n",
2781 ioc->name, ioc->HostPageBuffer,
2782 ioc->HostPageBuffer_sz));
2783 pci_free_consistent(ioc->pcidev, ioc->HostPageBuffer_sz,
2784 ioc->HostPageBuffer, ioc->HostPageBuffer_dma);
2785 ioc->HostPageBuffer = NULL;
2786 ioc->HostPageBuffer_sz = 0;
2787 ioc->alloc_total -= ioc->HostPageBuffer_sz;
2788 }
2789
2790 pci_set_drvdata(ioc->pcidev, NULL);
2791 }
2792 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2793 /**
2794 * mpt_adapter_dispose - Free all resources associated with an MPT adapter
2795 * @ioc: Pointer to MPT adapter structure
2796 *
2797 * This routine unregisters h/w resources and frees all alloc'd memory
2798 * associated with a MPT adapter structure.
2799 */
2800 static void
mpt_adapter_dispose(MPT_ADAPTER * ioc)2801 mpt_adapter_dispose(MPT_ADAPTER *ioc)
2802 {
2803 int sz_first, sz_last;
2804
2805 if (ioc == NULL)
2806 return;
2807
2808 sz_first = ioc->alloc_total;
2809
2810 mpt_adapter_disable(ioc);
2811
2812 if (ioc->pci_irq != -1) {
2813 free_irq(ioc->pci_irq, ioc);
2814 if (ioc->msi_enable)
2815 pci_disable_msi(ioc->pcidev);
2816 ioc->pci_irq = -1;
2817 }
2818
2819 if (ioc->memmap != NULL) {
2820 iounmap(ioc->memmap);
2821 ioc->memmap = NULL;
2822 }
2823
2824 pci_disable_device(ioc->pcidev);
2825 pci_release_selected_regions(ioc->pcidev, ioc->bars);
2826
2827 #if defined(CONFIG_MTRR) && 0
2828 if (ioc->mtrr_reg > 0) {
2829 mtrr_del(ioc->mtrr_reg, 0, 0);
2830 dprintk(ioc, printk(MYIOC_s_INFO_FMT "MTRR region de-registered\n", ioc->name));
2831 }
2832 #endif
2833
2834 /* Zap the adapter lookup ptr! */
2835 list_del(&ioc->list);
2836
2837 sz_last = ioc->alloc_total;
2838 dprintk(ioc, printk(MYIOC_s_INFO_FMT "free'd %d of %d bytes\n",
2839 ioc->name, sz_first-sz_last+(int)sizeof(*ioc), sz_first));
2840
2841 if (ioc->alt_ioc)
2842 ioc->alt_ioc->alt_ioc = NULL;
2843
2844 kfree(ioc);
2845 }
2846
2847 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2848 /**
2849 * MptDisplayIocCapabilities - Disply IOC's capabilities.
2850 * @ioc: Pointer to MPT adapter structure
2851 */
2852 static void
MptDisplayIocCapabilities(MPT_ADAPTER * ioc)2853 MptDisplayIocCapabilities(MPT_ADAPTER *ioc)
2854 {
2855 int i = 0;
2856
2857 printk(KERN_INFO "%s: ", ioc->name);
2858 if (ioc->prod_name)
2859 printk("%s: ", ioc->prod_name);
2860 printk("Capabilities={");
2861
2862 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_INITIATOR) {
2863 printk("Initiator");
2864 i++;
2865 }
2866
2867 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2868 printk("%sTarget", i ? "," : "");
2869 i++;
2870 }
2871
2872 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
2873 printk("%sLAN", i ? "," : "");
2874 i++;
2875 }
2876
2877 #if 0
2878 /*
2879 * This would probably evoke more questions than it's worth
2880 */
2881 if (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_TARGET) {
2882 printk("%sLogBusAddr", i ? "," : "");
2883 i++;
2884 }
2885 #endif
2886
2887 printk("}\n");
2888 }
2889
2890 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
2891 /**
2892 * MakeIocReady - Get IOC to a READY state, using KickStart if needed.
2893 * @ioc: Pointer to MPT_ADAPTER structure
2894 * @force: Force hard KickStart of IOC
2895 * @sleepFlag: Specifies whether the process can sleep
2896 *
2897 * Returns:
2898 * 1 - DIAG reset and READY
2899 * 0 - READY initially OR soft reset and READY
2900 * -1 - Any failure on KickStart
2901 * -2 - Msg Unit Reset Failed
2902 * -3 - IO Unit Reset Failed
2903 * -4 - IOC owned by a PEER
2904 */
2905 static int
MakeIocReady(MPT_ADAPTER * ioc,int force,int sleepFlag)2906 MakeIocReady(MPT_ADAPTER *ioc, int force, int sleepFlag)
2907 {
2908 u32 ioc_state;
2909 int statefault = 0;
2910 int cntdn;
2911 int hard_reset_done = 0;
2912 int r;
2913 int ii;
2914 int whoinit;
2915
2916 /* Get current [raw] IOC state */
2917 ioc_state = mpt_GetIocState(ioc, 0);
2918 dhsprintk(ioc, printk(MYIOC_s_INFO_FMT "MakeIocReady [raw] state=%08x\n", ioc->name, ioc_state));
2919
2920 /*
2921 * Check to see if IOC got left/stuck in doorbell handshake
2922 * grip of death. If so, hard reset the IOC.
2923 */
2924 if (ioc_state & MPI_DOORBELL_ACTIVE) {
2925 statefault = 1;
2926 printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n",
2927 ioc->name);
2928 }
2929
2930 /* Is it already READY? */
2931 if (!statefault &&
2932 ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_READY)) {
2933 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2934 "IOC is in READY state\n", ioc->name));
2935 return 0;
2936 }
2937
2938 /*
2939 * Check to see if IOC is in FAULT state.
2940 */
2941 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
2942 statefault = 2;
2943 printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n",
2944 ioc->name);
2945 printk(MYIOC_s_WARN_FMT " FAULT code = %04xh\n",
2946 ioc->name, ioc_state & MPI_DOORBELL_DATA_MASK);
2947 }
2948
2949 /*
2950 * Hmmm... Did it get left operational?
2951 */
2952 if ((ioc_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_OPERATIONAL) {
2953 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC operational unexpected\n",
2954 ioc->name));
2955
2956 /* Check WhoInit.
2957 * If PCI Peer, exit.
2958 * Else, if no fault conditions are present, issue a MessageUnitReset
2959 * Else, fall through to KickStart case
2960 */
2961 whoinit = (ioc_state & MPI_DOORBELL_WHO_INIT_MASK) >> MPI_DOORBELL_WHO_INIT_SHIFT;
2962 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
2963 "whoinit 0x%x statefault %d force %d\n",
2964 ioc->name, whoinit, statefault, force));
2965 if (whoinit == MPI_WHOINIT_PCI_PEER)
2966 return -4;
2967 else {
2968 if ((statefault == 0 ) && (force == 0)) {
2969 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) == 0)
2970 return 0;
2971 }
2972 statefault = 3;
2973 }
2974 }
2975
2976 hard_reset_done = KickStart(ioc, statefault||force, sleepFlag);
2977 if (hard_reset_done < 0)
2978 return -1;
2979
2980 /*
2981 * Loop here waiting for IOC to come READY.
2982 */
2983 ii = 0;
2984 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 5; /* 5 seconds */
2985
2986 while ((ioc_state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
2987 if (ioc_state == MPI_IOC_STATE_OPERATIONAL) {
2988 /*
2989 * BIOS or previous driver load left IOC in OP state.
2990 * Reset messaging FIFOs.
2991 */
2992 if ((r = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag)) != 0) {
2993 printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name);
2994 return -2;
2995 }
2996 } else if (ioc_state == MPI_IOC_STATE_RESET) {
2997 /*
2998 * Something is wrong. Try to get IOC back
2999 * to a known state.
3000 */
3001 if ((r = SendIocReset(ioc, MPI_FUNCTION_IO_UNIT_RESET, sleepFlag)) != 0) {
3002 printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name);
3003 return -3;
3004 }
3005 }
3006
3007 ii++; cntdn--;
3008 if (!cntdn) {
3009 printk(MYIOC_s_ERR_FMT
3010 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
3011 ioc->name, ioc_state, (int)((ii+5)/HZ));
3012 return -ETIME;
3013 }
3014
3015 if (sleepFlag == CAN_SLEEP) {
3016 msleep(1);
3017 } else {
3018 mdelay (1); /* 1 msec delay */
3019 }
3020
3021 }
3022
3023 if (statefault < 3) {
3024 printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name,
3025 statefault == 1 ? "stuck handshake" : "IOC FAULT");
3026 }
3027
3028 return hard_reset_done;
3029 }
3030
3031 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3032 /**
3033 * mpt_GetIocState - Get the current state of a MPT adapter.
3034 * @ioc: Pointer to MPT_ADAPTER structure
3035 * @cooked: Request raw or cooked IOC state
3036 *
3037 * Returns all IOC Doorbell register bits if cooked==0, else just the
3038 * Doorbell bits in MPI_IOC_STATE_MASK.
3039 */
3040 u32
mpt_GetIocState(MPT_ADAPTER * ioc,int cooked)3041 mpt_GetIocState(MPT_ADAPTER *ioc, int cooked)
3042 {
3043 u32 s, sc;
3044
3045 /* Get! */
3046 s = CHIPREG_READ32(&ioc->chip->Doorbell);
3047 sc = s & MPI_IOC_STATE_MASK;
3048
3049 /* Save! */
3050 ioc->last_state = sc;
3051
3052 return cooked ? sc : s;
3053 }
3054
3055 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3056 /**
3057 * GetIocFacts - Send IOCFacts request to MPT adapter.
3058 * @ioc: Pointer to MPT_ADAPTER structure
3059 * @sleepFlag: Specifies whether the process can sleep
3060 * @reason: If recovery, only update facts.
3061 *
3062 * Returns 0 for success, non-zero for failure.
3063 */
3064 static int
GetIocFacts(MPT_ADAPTER * ioc,int sleepFlag,int reason)3065 GetIocFacts(MPT_ADAPTER *ioc, int sleepFlag, int reason)
3066 {
3067 IOCFacts_t get_facts;
3068 IOCFactsReply_t *facts;
3069 int r;
3070 int req_sz;
3071 int reply_sz;
3072 int sz;
3073 u32 status, vv;
3074 u8 shiftFactor=1;
3075
3076 /* IOC *must* NOT be in RESET state! */
3077 if (ioc->last_state == MPI_IOC_STATE_RESET) {
3078 printk(KERN_ERR MYNAM
3079 ": ERROR - Can't get IOCFacts, %s NOT READY! (%08x)\n",
3080 ioc->name, ioc->last_state);
3081 return -44;
3082 }
3083
3084 facts = &ioc->facts;
3085
3086 /* Destination (reply area)... */
3087 reply_sz = sizeof(*facts);
3088 memset(facts, 0, reply_sz);
3089
3090 /* Request area (get_facts on the stack right now!) */
3091 req_sz = sizeof(get_facts);
3092 memset(&get_facts, 0, req_sz);
3093
3094 get_facts.Function = MPI_FUNCTION_IOC_FACTS;
3095 /* Assert: All other get_facts fields are zero! */
3096
3097 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3098 "Sending get IocFacts request req_sz=%d reply_sz=%d\n",
3099 ioc->name, req_sz, reply_sz));
3100
3101 /* No non-zero fields in the get_facts request are greater than
3102 * 1 byte in size, so we can just fire it off as is.
3103 */
3104 r = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_facts,
3105 reply_sz, (u16*)facts, 5 /*seconds*/, sleepFlag);
3106 if (r != 0)
3107 return r;
3108
3109 /*
3110 * Now byte swap (GRRR) the necessary fields before any further
3111 * inspection of reply contents.
3112 *
3113 * But need to do some sanity checks on MsgLength (byte) field
3114 * to make sure we don't zero IOC's req_sz!
3115 */
3116 /* Did we get a valid reply? */
3117 if (facts->MsgLength > offsetof(IOCFactsReply_t, RequestFrameSize)/sizeof(u32)) {
3118 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3119 /*
3120 * If not been here, done that, save off first WhoInit value
3121 */
3122 if (ioc->FirstWhoInit == WHOINIT_UNKNOWN)
3123 ioc->FirstWhoInit = facts->WhoInit;
3124 }
3125
3126 facts->MsgVersion = le16_to_cpu(facts->MsgVersion);
3127 facts->MsgContext = le32_to_cpu(facts->MsgContext);
3128 facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions);
3129 facts->IOCStatus = le16_to_cpu(facts->IOCStatus);
3130 facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo);
3131 status = le16_to_cpu(facts->IOCStatus) & MPI_IOCSTATUS_MASK;
3132 /* CHECKME! IOCStatus, IOCLogInfo */
3133
3134 facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth);
3135 facts->RequestFrameSize = le16_to_cpu(facts->RequestFrameSize);
3136
3137 /*
3138 * FC f/w version changed between 1.1 and 1.2
3139 * Old: u16{Major(4),Minor(4),SubMinor(8)}
3140 * New: u32{Major(8),Minor(8),Unit(8),Dev(8)}
3141 */
3142 if (facts->MsgVersion < MPI_VERSION_01_02) {
3143 /*
3144 * Handle old FC f/w style, convert to new...
3145 */
3146 u16 oldv = le16_to_cpu(facts->Reserved_0101_FWVersion);
3147 facts->FWVersion.Word =
3148 ((oldv<<12) & 0xFF000000) |
3149 ((oldv<<8) & 0x000FFF00);
3150 } else
3151 facts->FWVersion.Word = le32_to_cpu(facts->FWVersion.Word);
3152
3153 facts->ProductID = le16_to_cpu(facts->ProductID);
3154
3155 if ((ioc->facts.ProductID & MPI_FW_HEADER_PID_PROD_MASK)
3156 > MPI_FW_HEADER_PID_PROD_TARGET_SCSI)
3157 ioc->ir_firmware = 1;
3158
3159 facts->CurrentHostMfaHighAddr =
3160 le32_to_cpu(facts->CurrentHostMfaHighAddr);
3161 facts->GlobalCredits = le16_to_cpu(facts->GlobalCredits);
3162 facts->CurrentSenseBufferHighAddr =
3163 le32_to_cpu(facts->CurrentSenseBufferHighAddr);
3164 facts->CurReplyFrameSize =
3165 le16_to_cpu(facts->CurReplyFrameSize);
3166 facts->IOCCapabilities = le32_to_cpu(facts->IOCCapabilities);
3167
3168 /*
3169 * Handle NEW (!) IOCFactsReply fields in MPI-1.01.xx
3170 * Older MPI-1.00.xx struct had 13 dwords, and enlarged
3171 * to 14 in MPI-1.01.0x.
3172 */
3173 if (facts->MsgLength >= (offsetof(IOCFactsReply_t,FWImageSize) + 7)/4 &&
3174 facts->MsgVersion > MPI_VERSION_01_00) {
3175 facts->FWImageSize = le32_to_cpu(facts->FWImageSize);
3176 }
3177
3178 sz = facts->FWImageSize;
3179 if ( sz & 0x01 )
3180 sz += 1;
3181 if ( sz & 0x02 )
3182 sz += 2;
3183 facts->FWImageSize = sz;
3184
3185 if (!facts->RequestFrameSize) {
3186 /* Something is wrong! */
3187 printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n",
3188 ioc->name);
3189 return -55;
3190 }
3191
3192 r = sz = facts->BlockSize;
3193 vv = ((63 / (sz * 4)) + 1) & 0x03;
3194 ioc->NB_for_64_byte_frame = vv;
3195 while ( sz )
3196 {
3197 shiftFactor++;
3198 sz = sz >> 1;
3199 }
3200 ioc->NBShiftFactor = shiftFactor;
3201 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3202 "NB_for_64_byte_frame=%x NBShiftFactor=%x BlockSize=%x\n",
3203 ioc->name, vv, shiftFactor, r));
3204
3205 if (reason == MPT_HOSTEVENT_IOC_BRINGUP) {
3206 /*
3207 * Set values for this IOC's request & reply frame sizes,
3208 * and request & reply queue depths...
3209 */
3210 ioc->req_sz = min(MPT_DEFAULT_FRAME_SIZE, facts->RequestFrameSize * 4);
3211 ioc->req_depth = min_t(int, MPT_MAX_REQ_DEPTH, facts->GlobalCredits);
3212 ioc->reply_sz = MPT_REPLY_FRAME_SIZE;
3213 ioc->reply_depth = min_t(int, MPT_DEFAULT_REPLY_DEPTH, facts->ReplyQueueDepth);
3214
3215 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "reply_sz=%3d, reply_depth=%4d\n",
3216 ioc->name, ioc->reply_sz, ioc->reply_depth));
3217 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "req_sz =%3d, req_depth =%4d\n",
3218 ioc->name, ioc->req_sz, ioc->req_depth));
3219
3220 /* Get port facts! */
3221 if ( (r = GetPortFacts(ioc, 0, sleepFlag)) != 0 )
3222 return r;
3223 }
3224 } else {
3225 printk(MYIOC_s_ERR_FMT
3226 "Invalid IOC facts reply, msgLength=%d offsetof=%zd!\n",
3227 ioc->name, facts->MsgLength, (offsetof(IOCFactsReply_t,
3228 RequestFrameSize)/sizeof(u32)));
3229 return -66;
3230 }
3231
3232 return 0;
3233 }
3234
3235 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3236 /**
3237 * GetPortFacts - Send PortFacts request to MPT adapter.
3238 * @ioc: Pointer to MPT_ADAPTER structure
3239 * @portnum: Port number
3240 * @sleepFlag: Specifies whether the process can sleep
3241 *
3242 * Returns 0 for success, non-zero for failure.
3243 */
3244 static int
GetPortFacts(MPT_ADAPTER * ioc,int portnum,int sleepFlag)3245 GetPortFacts(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3246 {
3247 PortFacts_t get_pfacts;
3248 PortFactsReply_t *pfacts;
3249 int ii;
3250 int req_sz;
3251 int reply_sz;
3252 int max_id;
3253
3254 /* IOC *must* NOT be in RESET state! */
3255 if (ioc->last_state == MPI_IOC_STATE_RESET) {
3256 printk(MYIOC_s_ERR_FMT "Can't get PortFacts NOT READY! (%08x)\n",
3257 ioc->name, ioc->last_state );
3258 return -4;
3259 }
3260
3261 pfacts = &ioc->pfacts[portnum];
3262
3263 /* Destination (reply area)... */
3264 reply_sz = sizeof(*pfacts);
3265 memset(pfacts, 0, reply_sz);
3266
3267 /* Request area (get_pfacts on the stack right now!) */
3268 req_sz = sizeof(get_pfacts);
3269 memset(&get_pfacts, 0, req_sz);
3270
3271 get_pfacts.Function = MPI_FUNCTION_PORT_FACTS;
3272 get_pfacts.PortNumber = portnum;
3273 /* Assert: All other get_pfacts fields are zero! */
3274
3275 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending get PortFacts(%d) request\n",
3276 ioc->name, portnum));
3277
3278 /* No non-zero fields in the get_pfacts request are greater than
3279 * 1 byte in size, so we can just fire it off as is.
3280 */
3281 ii = mpt_handshake_req_reply_wait(ioc, req_sz, (u32*)&get_pfacts,
3282 reply_sz, (u16*)pfacts, 5 /*seconds*/, sleepFlag);
3283 if (ii != 0)
3284 return ii;
3285
3286 /* Did we get a valid reply? */
3287
3288 /* Now byte swap the necessary fields in the response. */
3289 pfacts->MsgContext = le32_to_cpu(pfacts->MsgContext);
3290 pfacts->IOCStatus = le16_to_cpu(pfacts->IOCStatus);
3291 pfacts->IOCLogInfo = le32_to_cpu(pfacts->IOCLogInfo);
3292 pfacts->MaxDevices = le16_to_cpu(pfacts->MaxDevices);
3293 pfacts->PortSCSIID = le16_to_cpu(pfacts->PortSCSIID);
3294 pfacts->ProtocolFlags = le16_to_cpu(pfacts->ProtocolFlags);
3295 pfacts->MaxPostedCmdBuffers = le16_to_cpu(pfacts->MaxPostedCmdBuffers);
3296 pfacts->MaxPersistentIDs = le16_to_cpu(pfacts->MaxPersistentIDs);
3297 pfacts->MaxLanBuckets = le16_to_cpu(pfacts->MaxLanBuckets);
3298
3299 max_id = (ioc->bus_type == SAS) ? pfacts->PortSCSIID :
3300 pfacts->MaxDevices;
3301 ioc->devices_per_bus = (max_id > 255) ? 256 : max_id;
3302 ioc->number_of_buses = (ioc->devices_per_bus < 256) ? 1 : max_id/256;
3303
3304 /*
3305 * Place all the devices on channels
3306 *
3307 * (for debuging)
3308 */
3309 if (mpt_channel_mapping) {
3310 ioc->devices_per_bus = 1;
3311 ioc->number_of_buses = (max_id > 255) ? 255 : max_id;
3312 }
3313
3314 return 0;
3315 }
3316
3317 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3318 /**
3319 * SendIocInit - Send IOCInit request to MPT adapter.
3320 * @ioc: Pointer to MPT_ADAPTER structure
3321 * @sleepFlag: Specifies whether the process can sleep
3322 *
3323 * Send IOCInit followed by PortEnable to bring IOC to OPERATIONAL state.
3324 *
3325 * Returns 0 for success, non-zero for failure.
3326 */
3327 static int
SendIocInit(MPT_ADAPTER * ioc,int sleepFlag)3328 SendIocInit(MPT_ADAPTER *ioc, int sleepFlag)
3329 {
3330 IOCInit_t ioc_init;
3331 MPIDefaultReply_t init_reply;
3332 u32 state;
3333 int r;
3334 int count;
3335 int cntdn;
3336
3337 memset(&ioc_init, 0, sizeof(ioc_init));
3338 memset(&init_reply, 0, sizeof(init_reply));
3339
3340 ioc_init.WhoInit = MPI_WHOINIT_HOST_DRIVER;
3341 ioc_init.Function = MPI_FUNCTION_IOC_INIT;
3342
3343 /* If we are in a recovery mode and we uploaded the FW image,
3344 * then this pointer is not NULL. Skip the upload a second time.
3345 * Set this flag if cached_fw set for either IOC.
3346 */
3347 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
3348 ioc->upload_fw = 1;
3349 else
3350 ioc->upload_fw = 0;
3351 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "upload_fw %d facts.Flags=%x\n",
3352 ioc->name, ioc->upload_fw, ioc->facts.Flags));
3353
3354 ioc_init.MaxDevices = (U8)ioc->devices_per_bus;
3355 ioc_init.MaxBuses = (U8)ioc->number_of_buses;
3356
3357 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n",
3358 ioc->name, ioc->facts.MsgVersion));
3359 if (ioc->facts.MsgVersion >= MPI_VERSION_01_05) {
3360 // set MsgVersion and HeaderVersion host driver was built with
3361 ioc_init.MsgVersion = cpu_to_le16(MPI_VERSION);
3362 ioc_init.HeaderVersion = cpu_to_le16(MPI_HEADER_VERSION);
3363
3364 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_HOST_PAGE_BUFFER_PERSISTENT) {
3365 ioc_init.HostPageBufferSGE = ioc->facts.HostPageBufferSGE;
3366 } else if(mpt_host_page_alloc(ioc, &ioc_init))
3367 return -99;
3368 }
3369 ioc_init.ReplyFrameSize = cpu_to_le16(ioc->reply_sz); /* in BYTES */
3370
3371 if (ioc->sg_addr_size == sizeof(u64)) {
3372 /* Save the upper 32-bits of the request
3373 * (reply) and sense buffers.
3374 */
3375 ioc_init.HostMfaHighAddr = cpu_to_le32((u32)((u64)ioc->alloc_dma >> 32));
3376 ioc_init.SenseBufferHighAddr = cpu_to_le32((u32)((u64)ioc->sense_buf_pool_dma >> 32));
3377 } else {
3378 /* Force 32-bit addressing */
3379 ioc_init.HostMfaHighAddr = cpu_to_le32(0);
3380 ioc_init.SenseBufferHighAddr = cpu_to_le32(0);
3381 }
3382
3383 ioc->facts.CurrentHostMfaHighAddr = ioc_init.HostMfaHighAddr;
3384 ioc->facts.CurrentSenseBufferHighAddr = ioc_init.SenseBufferHighAddr;
3385 ioc->facts.MaxDevices = ioc_init.MaxDevices;
3386 ioc->facts.MaxBuses = ioc_init.MaxBuses;
3387
3388 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOCInit (req @ %p)\n",
3389 ioc->name, &ioc_init));
3390
3391 r = mpt_handshake_req_reply_wait(ioc, sizeof(IOCInit_t), (u32*)&ioc_init,
3392 sizeof(MPIDefaultReply_t), (u16*)&init_reply, 10 /*seconds*/, sleepFlag);
3393 if (r != 0) {
3394 printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r);
3395 return r;
3396 }
3397
3398 /* No need to byte swap the multibyte fields in the reply
3399 * since we don't even look at its contents.
3400 */
3401
3402 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending PortEnable (req @ %p)\n",
3403 ioc->name, &ioc_init));
3404
3405 if ((r = SendPortEnable(ioc, 0, sleepFlag)) != 0) {
3406 printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r);
3407 return r;
3408 }
3409
3410 /* YIKES! SUPER IMPORTANT!!!
3411 * Poll IocState until _OPERATIONAL while IOC is doing
3412 * LoopInit and TargetDiscovery!
3413 */
3414 count = 0;
3415 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 60; /* 60 seconds */
3416 state = mpt_GetIocState(ioc, 1);
3417 while (state != MPI_IOC_STATE_OPERATIONAL && --cntdn) {
3418 if (sleepFlag == CAN_SLEEP) {
3419 msleep(1);
3420 } else {
3421 mdelay(1);
3422 }
3423
3424 if (!cntdn) {
3425 printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n",
3426 ioc->name, (int)((count+5)/HZ));
3427 return -9;
3428 }
3429
3430 state = mpt_GetIocState(ioc, 1);
3431 count++;
3432 }
3433 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wait IOC_OPERATIONAL state (cnt=%d)\n",
3434 ioc->name, count));
3435
3436 ioc->aen_event_read_flag=0;
3437 return r;
3438 }
3439
3440 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3441 /**
3442 * SendPortEnable - Send PortEnable request to MPT adapter port.
3443 * @ioc: Pointer to MPT_ADAPTER structure
3444 * @portnum: Port number to enable
3445 * @sleepFlag: Specifies whether the process can sleep
3446 *
3447 * Send PortEnable to bring IOC to OPERATIONAL state.
3448 *
3449 * Returns 0 for success, non-zero for failure.
3450 */
3451 static int
SendPortEnable(MPT_ADAPTER * ioc,int portnum,int sleepFlag)3452 SendPortEnable(MPT_ADAPTER *ioc, int portnum, int sleepFlag)
3453 {
3454 PortEnable_t port_enable;
3455 MPIDefaultReply_t reply_buf;
3456 int rc;
3457 int req_sz;
3458 int reply_sz;
3459
3460 /* Destination... */
3461 reply_sz = sizeof(MPIDefaultReply_t);
3462 memset(&reply_buf, 0, reply_sz);
3463
3464 req_sz = sizeof(PortEnable_t);
3465 memset(&port_enable, 0, req_sz);
3466
3467 port_enable.Function = MPI_FUNCTION_PORT_ENABLE;
3468 port_enable.PortNumber = portnum;
3469 /* port_enable.ChainOffset = 0; */
3470 /* port_enable.MsgFlags = 0; */
3471 /* port_enable.MsgContext = 0; */
3472
3473 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Port(%d)Enable (req @ %p)\n",
3474 ioc->name, portnum, &port_enable));
3475
3476 /* RAID FW may take a long time to enable
3477 */
3478 if (ioc->ir_firmware || ioc->bus_type == SAS) {
3479 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3480 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3481 300 /*seconds*/, sleepFlag);
3482 } else {
3483 rc = mpt_handshake_req_reply_wait(ioc, req_sz,
3484 (u32*)&port_enable, reply_sz, (u16*)&reply_buf,
3485 30 /*seconds*/, sleepFlag);
3486 }
3487 return rc;
3488 }
3489
3490 /**
3491 * mpt_alloc_fw_memory - allocate firmware memory
3492 * @ioc: Pointer to MPT_ADAPTER structure
3493 * @size: total FW bytes
3494 *
3495 * If memory has already been allocated, the same (cached) value
3496 * is returned.
3497 *
3498 * Return 0 if successful, or non-zero for failure
3499 **/
3500 int
mpt_alloc_fw_memory(MPT_ADAPTER * ioc,int size)3501 mpt_alloc_fw_memory(MPT_ADAPTER *ioc, int size)
3502 {
3503 int rc;
3504
3505 if (ioc->cached_fw) {
3506 rc = 0; /* use already allocated memory */
3507 goto out;
3508 }
3509 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw) {
3510 ioc->cached_fw = ioc->alt_ioc->cached_fw; /* use alt_ioc's memory */
3511 ioc->cached_fw_dma = ioc->alt_ioc->cached_fw_dma;
3512 rc = 0;
3513 goto out;
3514 }
3515 ioc->cached_fw = pci_alloc_consistent(ioc->pcidev, size, &ioc->cached_fw_dma);
3516 if (!ioc->cached_fw) {
3517 printk(MYIOC_s_ERR_FMT "Unable to allocate memory for the cached firmware image!\n",
3518 ioc->name);
3519 rc = -1;
3520 } else {
3521 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Image @ %p[%p], sz=%d[%x] bytes\n",
3522 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, size, size));
3523 ioc->alloc_total += size;
3524 rc = 0;
3525 }
3526 out:
3527 return rc;
3528 }
3529
3530 /**
3531 * mpt_free_fw_memory - free firmware memory
3532 * @ioc: Pointer to MPT_ADAPTER structure
3533 *
3534 * If alt_img is NULL, delete from ioc structure.
3535 * Else, delete a secondary image in same format.
3536 **/
3537 void
mpt_free_fw_memory(MPT_ADAPTER * ioc)3538 mpt_free_fw_memory(MPT_ADAPTER *ioc)
3539 {
3540 int sz;
3541
3542 if (!ioc->cached_fw)
3543 return;
3544
3545 sz = ioc->facts.FWImageSize;
3546 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n",
3547 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3548 pci_free_consistent(ioc->pcidev, sz, ioc->cached_fw, ioc->cached_fw_dma);
3549 ioc->alloc_total -= sz;
3550 ioc->cached_fw = NULL;
3551 }
3552
3553 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3554 /**
3555 * mpt_do_upload - Construct and Send FWUpload request to MPT adapter port.
3556 * @ioc: Pointer to MPT_ADAPTER structure
3557 * @sleepFlag: Specifies whether the process can sleep
3558 *
3559 * Returns 0 for success, >0 for handshake failure
3560 * <0 for fw upload failure.
3561 *
3562 * Remark: If bound IOC and a successful FWUpload was performed
3563 * on the bound IOC, the second image is discarded
3564 * and memory is free'd. Both channels must upload to prevent
3565 * IOC from running in degraded mode.
3566 */
3567 static int
mpt_do_upload(MPT_ADAPTER * ioc,int sleepFlag)3568 mpt_do_upload(MPT_ADAPTER *ioc, int sleepFlag)
3569 {
3570 u8 reply[sizeof(FWUploadReply_t)];
3571 FWUpload_t *prequest;
3572 FWUploadReply_t *preply;
3573 FWUploadTCSGE_t *ptcsge;
3574 u32 flagsLength;
3575 int ii, sz, reply_sz;
3576 int cmdStatus;
3577 int request_size;
3578 /* If the image size is 0, we are done.
3579 */
3580 if ((sz = ioc->facts.FWImageSize) == 0)
3581 return 0;
3582
3583 if (mpt_alloc_fw_memory(ioc, ioc->facts.FWImageSize) != 0)
3584 return -ENOMEM;
3585
3586 dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image @ %p[%p], sz=%d[%x] bytes\n",
3587 ioc->name, ioc->cached_fw, (void *)(ulong)ioc->cached_fw_dma, sz, sz));
3588
3589 prequest = (sleepFlag == NO_SLEEP) ? kzalloc(ioc->req_sz, GFP_ATOMIC) :
3590 kzalloc(ioc->req_sz, GFP_KERNEL);
3591 if (!prequest) {
3592 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed "
3593 "while allocating memory \n", ioc->name));
3594 mpt_free_fw_memory(ioc);
3595 return -ENOMEM;
3596 }
3597
3598 preply = (FWUploadReply_t *)&reply;
3599
3600 reply_sz = sizeof(reply);
3601 memset(preply, 0, reply_sz);
3602
3603 prequest->ImageType = MPI_FW_UPLOAD_ITYPE_FW_IOC_MEM;
3604 prequest->Function = MPI_FUNCTION_FW_UPLOAD;
3605
3606 ptcsge = (FWUploadTCSGE_t *) &prequest->SGL;
3607 ptcsge->DetailsLength = 12;
3608 ptcsge->Flags = MPI_SGE_FLAGS_TRANSACTION_ELEMENT;
3609 ptcsge->ImageSize = cpu_to_le32(sz);
3610 ptcsge++;
3611
3612 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ | sz;
3613 ioc->add_sge((char *)ptcsge, flagsLength, ioc->cached_fw_dma);
3614 request_size = offsetof(FWUpload_t, SGL) + sizeof(FWUploadTCSGE_t) +
3615 ioc->SGE_size;
3616 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload "
3617 " (req @ %p) fw_size=%d mf_request_size=%d\n", ioc->name, prequest,
3618 ioc->facts.FWImageSize, request_size));
3619 DBG_DUMP_FW_REQUEST_FRAME(ioc, (u32 *)prequest);
3620
3621 ii = mpt_handshake_req_reply_wait(ioc, request_size, (u32 *)prequest,
3622 reply_sz, (u16 *)preply, 65 /*seconds*/, sleepFlag);
3623
3624 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed "
3625 "rc=%x \n", ioc->name, ii));
3626
3627 cmdStatus = -EFAULT;
3628 if (ii == 0) {
3629 /* Handshake transfer was complete and successful.
3630 * Check the Reply Frame.
3631 */
3632 int status;
3633 status = le16_to_cpu(preply->IOCStatus) &
3634 MPI_IOCSTATUS_MASK;
3635 if (status == MPI_IOCSTATUS_SUCCESS &&
3636 ioc->facts.FWImageSize ==
3637 le32_to_cpu(preply->ActualImageSize))
3638 cmdStatus = 0;
3639 }
3640 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n",
3641 ioc->name, cmdStatus));
3642
3643
3644 if (cmdStatus) {
3645 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, "
3646 "freeing image \n", ioc->name));
3647 mpt_free_fw_memory(ioc);
3648 }
3649 kfree(prequest);
3650
3651 return cmdStatus;
3652 }
3653
3654 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3655 /**
3656 * mpt_downloadboot - DownloadBoot code
3657 * @ioc: Pointer to MPT_ADAPTER structure
3658 * @pFwHeader: Pointer to firmware header info
3659 * @sleepFlag: Specifies whether the process can sleep
3660 *
3661 * FwDownloadBoot requires Programmed IO access.
3662 *
3663 * Returns 0 for success
3664 * -1 FW Image size is 0
3665 * -2 No valid cached_fw Pointer
3666 * <0 for fw upload failure.
3667 */
3668 static int
mpt_downloadboot(MPT_ADAPTER * ioc,MpiFwHeader_t * pFwHeader,int sleepFlag)3669 mpt_downloadboot(MPT_ADAPTER *ioc, MpiFwHeader_t *pFwHeader, int sleepFlag)
3670 {
3671 MpiExtImageHeader_t *pExtImage;
3672 u32 fwSize;
3673 u32 diag0val;
3674 int count;
3675 u32 *ptrFw;
3676 u32 diagRwData;
3677 u32 nextImage;
3678 u32 load_addr;
3679 u32 ioc_state=0;
3680
3681 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n",
3682 ioc->name, pFwHeader->ImageSize, pFwHeader->ImageSize, pFwHeader));
3683
3684 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3685 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3686 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3687 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3688 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3689 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3690
3691 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM));
3692
3693 /* wait 1 msec */
3694 if (sleepFlag == CAN_SLEEP) {
3695 msleep(1);
3696 } else {
3697 mdelay (1);
3698 }
3699
3700 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3701 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
3702
3703 for (count = 0; count < 30; count ++) {
3704 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3705 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
3706 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RESET_ADAPTER cleared, count=%d\n",
3707 ioc->name, count));
3708 break;
3709 }
3710 /* wait .1 sec */
3711 if (sleepFlag == CAN_SLEEP) {
3712 msleep (100);
3713 } else {
3714 mdelay (100);
3715 }
3716 }
3717
3718 if ( count == 30 ) {
3719 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot failed! "
3720 "Unable to get MPI_DIAG_DRWE mode, diag0val=%x\n",
3721 ioc->name, diag0val));
3722 return -3;
3723 }
3724
3725 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3726 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
3727 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
3728 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
3729 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
3730 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
3731
3732 /* Set the DiagRwEn and Disable ARM bits */
3733 CHIPREG_WRITE32(&ioc->chip->Diagnostic, (MPI_DIAG_RW_ENABLE | MPI_DIAG_DISABLE_ARM));
3734
3735 fwSize = (pFwHeader->ImageSize + 3)/4;
3736 ptrFw = (u32 *) pFwHeader;
3737
3738 /* Write the LoadStartAddress to the DiagRw Address Register
3739 * using Programmed IO
3740 */
3741 if (ioc->errata_flag_1064)
3742 pci_enable_io_access(ioc->pcidev);
3743
3744 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->LoadStartAddress);
3745 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "LoadStart addr written 0x%x \n",
3746 ioc->name, pFwHeader->LoadStartAddress));
3747
3748 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write FW Image: 0x%x bytes @ %p\n",
3749 ioc->name, fwSize*4, ptrFw));
3750 while (fwSize--) {
3751 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3752 }
3753
3754 nextImage = pFwHeader->NextImageHeaderOffset;
3755 while (nextImage) {
3756 pExtImage = (MpiExtImageHeader_t *) ((char *)pFwHeader + nextImage);
3757
3758 load_addr = pExtImage->LoadStartAddress;
3759
3760 fwSize = (pExtImage->ImageSize + 3) >> 2;
3761 ptrFw = (u32 *)pExtImage;
3762
3763 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n",
3764 ioc->name, fwSize*4, fwSize*4, ptrFw, load_addr));
3765 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, load_addr);
3766
3767 while (fwSize--) {
3768 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, *ptrFw++);
3769 }
3770 nextImage = pExtImage->NextImageHeaderOffset;
3771 }
3772
3773 /* Write the IopResetVectorRegAddr */
3774 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Addr=%x! \n", ioc->name, pFwHeader->IopResetRegAddr));
3775 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, pFwHeader->IopResetRegAddr);
3776
3777 /* Write the IopResetVectorValue */
3778 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue));
3779 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, pFwHeader->IopResetVectorValue);
3780
3781 /* Clear the internal flash bad bit - autoincrementing register,
3782 * so must do two writes.
3783 */
3784 if (ioc->bus_type == SPI) {
3785 /*
3786 * 1030 and 1035 H/W errata, workaround to access
3787 * the ClearFlashBadSignatureBit
3788 */
3789 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3790 diagRwData = CHIPREG_PIO_READ32(&ioc->pio_chip->DiagRwData);
3791 diagRwData |= 0x40000000;
3792 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwAddress, 0x3F000000);
3793 CHIPREG_PIO_WRITE32(&ioc->pio_chip->DiagRwData, diagRwData);
3794
3795 } else /* if((ioc->bus_type == SAS) || (ioc->bus_type == FC)) */ {
3796 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3797 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val |
3798 MPI_DIAG_CLEAR_FLASH_BAD_SIG);
3799
3800 /* wait 1 msec */
3801 if (sleepFlag == CAN_SLEEP) {
3802 msleep (1);
3803 } else {
3804 mdelay (1);
3805 }
3806 }
3807
3808 if (ioc->errata_flag_1064)
3809 pci_disable_io_access(ioc->pcidev);
3810
3811 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
3812 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot diag0val=%x, "
3813 "turning off PREVENT_IOC_BOOT, DISABLE_ARM, RW_ENABLE\n",
3814 ioc->name, diag0val));
3815 diag0val &= ~(MPI_DIAG_PREVENT_IOC_BOOT | MPI_DIAG_DISABLE_ARM | MPI_DIAG_RW_ENABLE);
3816 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot now diag0val=%x\n",
3817 ioc->name, diag0val));
3818 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
3819
3820 /* Write 0xFF to reset the sequencer */
3821 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
3822
3823 if (ioc->bus_type == SAS) {
3824 ioc_state = mpt_GetIocState(ioc, 0);
3825 if ( (GetIocFacts(ioc, sleepFlag,
3826 MPT_HOSTEVENT_IOC_BRINGUP)) != 0 ) {
3827 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "GetIocFacts failed: IocState=%x\n",
3828 ioc->name, ioc_state));
3829 return -EFAULT;
3830 }
3831 }
3832
3833 for (count=0; count<HZ*20; count++) {
3834 if ((ioc_state = mpt_GetIocState(ioc, 0)) & MPI_IOC_STATE_READY) {
3835 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3836 "downloadboot successful! (count=%d) IocState=%x\n",
3837 ioc->name, count, ioc_state));
3838 if (ioc->bus_type == SAS) {
3839 return 0;
3840 }
3841 if ((SendIocInit(ioc, sleepFlag)) != 0) {
3842 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3843 "downloadboot: SendIocInit failed\n",
3844 ioc->name));
3845 return -EFAULT;
3846 }
3847 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3848 "downloadboot: SendIocInit successful\n",
3849 ioc->name));
3850 return 0;
3851 }
3852 if (sleepFlag == CAN_SLEEP) {
3853 msleep (10);
3854 } else {
3855 mdelay (10);
3856 }
3857 }
3858 ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
3859 "downloadboot failed! IocState=%x\n",ioc->name, ioc_state));
3860 return -EFAULT;
3861 }
3862
3863 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3864 /**
3865 * KickStart - Perform hard reset of MPT adapter.
3866 * @ioc: Pointer to MPT_ADAPTER structure
3867 * @force: Force hard reset
3868 * @sleepFlag: Specifies whether the process can sleep
3869 *
3870 * This routine places MPT adapter in diagnostic mode via the
3871 * WriteSequence register, and then performs a hard reset of adapter
3872 * via the Diagnostic register.
3873 *
3874 * Inputs: sleepflag - CAN_SLEEP (non-interrupt thread)
3875 * or NO_SLEEP (interrupt thread, use mdelay)
3876 * force - 1 if doorbell active, board fault state
3877 * board operational, IOC_RECOVERY or
3878 * IOC_BRINGUP and there is an alt_ioc.
3879 * 0 else
3880 *
3881 * Returns:
3882 * 1 - hard reset, READY
3883 * 0 - no reset due to History bit, READY
3884 * -1 - no reset due to History bit but not READY
3885 * OR reset but failed to come READY
3886 * -2 - no reset, could not enter DIAG mode
3887 * -3 - reset but bad FW bit
3888 */
3889 static int
KickStart(MPT_ADAPTER * ioc,int force,int sleepFlag)3890 KickStart(MPT_ADAPTER *ioc, int force, int sleepFlag)
3891 {
3892 int hard_reset_done = 0;
3893 u32 ioc_state=0;
3894 int cnt,cntdn;
3895
3896 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStarting!\n", ioc->name));
3897 if (ioc->bus_type == SPI) {
3898 /* Always issue a Msg Unit Reset first. This will clear some
3899 * SCSI bus hang conditions.
3900 */
3901 SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
3902
3903 if (sleepFlag == CAN_SLEEP) {
3904 msleep (1000);
3905 } else {
3906 mdelay (1000);
3907 }
3908 }
3909
3910 hard_reset_done = mpt_diag_reset(ioc, force, sleepFlag);
3911 if (hard_reset_done < 0)
3912 return hard_reset_done;
3913
3914 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset successful!\n",
3915 ioc->name));
3916
3917 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 2; /* 2 seconds */
3918 for (cnt=0; cnt<cntdn; cnt++) {
3919 ioc_state = mpt_GetIocState(ioc, 1);
3920 if ((ioc_state == MPI_IOC_STATE_READY) || (ioc_state == MPI_IOC_STATE_OPERATIONAL)) {
3921 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStart successful! (cnt=%d)\n",
3922 ioc->name, cnt));
3923 return hard_reset_done;
3924 }
3925 if (sleepFlag == CAN_SLEEP) {
3926 msleep (10);
3927 } else {
3928 mdelay (10);
3929 }
3930 }
3931
3932 dinitprintk(ioc, printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n",
3933 ioc->name, mpt_GetIocState(ioc, 0)));
3934 return -1;
3935 }
3936
3937 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
3938 /**
3939 * mpt_diag_reset - Perform hard reset of the adapter.
3940 * @ioc: Pointer to MPT_ADAPTER structure
3941 * @ignore: Set if to honor and clear to ignore
3942 * the reset history bit
3943 * @sleepFlag: CAN_SLEEP if called in a non-interrupt thread,
3944 * else set to NO_SLEEP (use mdelay instead)
3945 *
3946 * This routine places the adapter in diagnostic mode via the
3947 * WriteSequence register and then performs a hard reset of adapter
3948 * via the Diagnostic register. Adapter should be in ready state
3949 * upon successful completion.
3950 *
3951 * Returns: 1 hard reset successful
3952 * 0 no reset performed because reset history bit set
3953 * -2 enabling diagnostic mode failed
3954 * -3 diagnostic reset failed
3955 */
3956 static int
mpt_diag_reset(MPT_ADAPTER * ioc,int ignore,int sleepFlag)3957 mpt_diag_reset(MPT_ADAPTER *ioc, int ignore, int sleepFlag)
3958 {
3959 u32 diag0val;
3960 u32 doorbell;
3961 int hard_reset_done = 0;
3962 int count = 0;
3963 u32 diag1val = 0;
3964 MpiFwHeader_t *cached_fw; /* Pointer to FW */
3965 u8 cb_idx;
3966
3967 /* Clear any existing interrupts */
3968 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
3969
3970 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078) {
3971
3972 if (!ignore)
3973 return 0;
3974
3975 drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
3976 "address=%p\n", ioc->name, __func__,
3977 &ioc->chip->Doorbell, &ioc->chip->Reset_1078));
3978 CHIPREG_WRITE32(&ioc->chip->Reset_1078, 0x07);
3979 if (sleepFlag == CAN_SLEEP)
3980 msleep(1);
3981 else
3982 mdelay(1);
3983
3984 /*
3985 * Call each currently registered protocol IOC reset handler
3986 * with pre-reset indication.
3987 * NOTE: If we're doing _IOC_BRINGUP, there can be no
3988 * MptResetHandlers[] registered yet.
3989 */
3990 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
3991 if (MptResetHandlers[cb_idx])
3992 (*(MptResetHandlers[cb_idx]))(ioc,
3993 MPT_IOC_PRE_RESET);
3994 }
3995
3996 for (count = 0; count < 60; count ++) {
3997 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
3998 doorbell &= MPI_IOC_STATE_MASK;
3999
4000 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4001 "looking for READY STATE: doorbell=%x"
4002 " count=%d\n",
4003 ioc->name, doorbell, count));
4004
4005 if (doorbell == MPI_IOC_STATE_READY) {
4006 return 1;
4007 }
4008
4009 /* wait 1 sec */
4010 if (sleepFlag == CAN_SLEEP)
4011 msleep(1000);
4012 else
4013 mdelay(1000);
4014 }
4015 return -1;
4016 }
4017
4018 /* Use "Diagnostic reset" method! (only thing available!) */
4019 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4020
4021 if (ioc->debug_level & MPT_DEBUG) {
4022 if (ioc->alt_ioc)
4023 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4024 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG1: diag0=%08x, diag1=%08x\n",
4025 ioc->name, diag0val, diag1val));
4026 }
4027
4028 /* Do the reset if we are told to ignore the reset history
4029 * or if the reset history is 0
4030 */
4031 if (ignore || !(diag0val & MPI_DIAG_RESET_HISTORY)) {
4032 while ((diag0val & MPI_DIAG_DRWE) == 0) {
4033 /* Write magic sequence to WriteSequence register
4034 * Loop until in diagnostic mode
4035 */
4036 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4037 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4038 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4039 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4040 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4041 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4042
4043 /* wait 100 msec */
4044 if (sleepFlag == CAN_SLEEP) {
4045 msleep (100);
4046 } else {
4047 mdelay (100);
4048 }
4049
4050 count++;
4051 if (count > 20) {
4052 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4053 ioc->name, diag0val);
4054 return -2;
4055
4056 }
4057
4058 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4059
4060 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wrote magic DiagWriteEn sequence (%x)\n",
4061 ioc->name, diag0val));
4062 }
4063
4064 if (ioc->debug_level & MPT_DEBUG) {
4065 if (ioc->alt_ioc)
4066 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4067 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG2: diag0=%08x, diag1=%08x\n",
4068 ioc->name, diag0val, diag1val));
4069 }
4070 /*
4071 * Disable the ARM (Bug fix)
4072 *
4073 */
4074 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_DISABLE_ARM);
4075 mdelay(1);
4076
4077 /*
4078 * Now hit the reset bit in the Diagnostic register
4079 * (THE BIG HAMMER!) (Clears DRWE bit).
4080 */
4081 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val | MPI_DIAG_RESET_ADAPTER);
4082 hard_reset_done = 1;
4083 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset performed\n",
4084 ioc->name));
4085
4086 /*
4087 * Call each currently registered protocol IOC reset handler
4088 * with pre-reset indication.
4089 * NOTE: If we're doing _IOC_BRINGUP, there can be no
4090 * MptResetHandlers[] registered yet.
4091 */
4092 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
4093 if (MptResetHandlers[cb_idx]) {
4094 mpt_signal_reset(cb_idx,
4095 ioc, MPT_IOC_PRE_RESET);
4096 if (ioc->alt_ioc) {
4097 mpt_signal_reset(cb_idx,
4098 ioc->alt_ioc, MPT_IOC_PRE_RESET);
4099 }
4100 }
4101 }
4102
4103 if (ioc->cached_fw)
4104 cached_fw = (MpiFwHeader_t *)ioc->cached_fw;
4105 else if (ioc->alt_ioc && ioc->alt_ioc->cached_fw)
4106 cached_fw = (MpiFwHeader_t *)ioc->alt_ioc->cached_fw;
4107 else
4108 cached_fw = NULL;
4109 if (cached_fw) {
4110 /* If the DownloadBoot operation fails, the
4111 * IOC will be left unusable. This is a fatal error
4112 * case. _diag_reset will return < 0
4113 */
4114 for (count = 0; count < 30; count ++) {
4115 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4116 if (!(diag0val & MPI_DIAG_RESET_ADAPTER)) {
4117 break;
4118 }
4119
4120 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "cached_fw: diag0val=%x count=%d\n",
4121 ioc->name, diag0val, count));
4122 /* wait 1 sec */
4123 if (sleepFlag == CAN_SLEEP) {
4124 msleep (1000);
4125 } else {
4126 mdelay (1000);
4127 }
4128 }
4129 if ((count = mpt_downloadboot(ioc, cached_fw, sleepFlag)) < 0) {
4130 printk(MYIOC_s_WARN_FMT
4131 "firmware downloadboot failure (%d)!\n", ioc->name, count);
4132 }
4133
4134 } else {
4135 /* Wait for FW to reload and for board
4136 * to go to the READY state.
4137 * Maximum wait is 60 seconds.
4138 * If fail, no error will check again
4139 * with calling program.
4140 */
4141 for (count = 0; count < 60; count ++) {
4142 doorbell = CHIPREG_READ32(&ioc->chip->Doorbell);
4143 doorbell &= MPI_IOC_STATE_MASK;
4144
4145 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4146 "looking for READY STATE: doorbell=%x"
4147 " count=%d\n", ioc->name, doorbell, count));
4148
4149 if (doorbell == MPI_IOC_STATE_READY) {
4150 break;
4151 }
4152
4153 /* wait 1 sec */
4154 if (sleepFlag == CAN_SLEEP) {
4155 msleep (1000);
4156 } else {
4157 mdelay (1000);
4158 }
4159 }
4160
4161 if (doorbell != MPI_IOC_STATE_READY)
4162 printk(MYIOC_s_ERR_FMT "Failed to come READY "
4163 "after reset! IocState=%x", ioc->name,
4164 doorbell);
4165 }
4166 }
4167
4168 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4169 if (ioc->debug_level & MPT_DEBUG) {
4170 if (ioc->alt_ioc)
4171 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4172 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG3: diag0=%08x, diag1=%08x\n",
4173 ioc->name, diag0val, diag1val));
4174 }
4175
4176 /* Clear RESET_HISTORY bit! Place board in the
4177 * diagnostic mode to update the diag register.
4178 */
4179 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4180 count = 0;
4181 while ((diag0val & MPI_DIAG_DRWE) == 0) {
4182 /* Write magic sequence to WriteSequence register
4183 * Loop until in diagnostic mode
4184 */
4185 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFF);
4186 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_1ST_KEY_VALUE);
4187 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_2ND_KEY_VALUE);
4188 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_3RD_KEY_VALUE);
4189 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_4TH_KEY_VALUE);
4190 CHIPREG_WRITE32(&ioc->chip->WriteSequence, MPI_WRSEQ_5TH_KEY_VALUE);
4191
4192 /* wait 100 msec */
4193 if (sleepFlag == CAN_SLEEP) {
4194 msleep (100);
4195 } else {
4196 mdelay (100);
4197 }
4198
4199 count++;
4200 if (count > 20) {
4201 printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
4202 ioc->name, diag0val);
4203 break;
4204 }
4205 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4206 }
4207 diag0val &= ~MPI_DIAG_RESET_HISTORY;
4208 CHIPREG_WRITE32(&ioc->chip->Diagnostic, diag0val);
4209 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4210 if (diag0val & MPI_DIAG_RESET_HISTORY) {
4211 printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n",
4212 ioc->name);
4213 }
4214
4215 /* Disable Diagnostic Mode
4216 */
4217 CHIPREG_WRITE32(&ioc->chip->WriteSequence, 0xFFFFFFFF);
4218
4219 /* Check FW reload status flags.
4220 */
4221 diag0val = CHIPREG_READ32(&ioc->chip->Diagnostic);
4222 if (diag0val & (MPI_DIAG_FLASH_BAD_SIG | MPI_DIAG_RESET_ADAPTER | MPI_DIAG_DISABLE_ARM)) {
4223 printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n",
4224 ioc->name, diag0val);
4225 return -3;
4226 }
4227
4228 if (ioc->debug_level & MPT_DEBUG) {
4229 if (ioc->alt_ioc)
4230 diag1val = CHIPREG_READ32(&ioc->alt_ioc->chip->Diagnostic);
4231 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG4: diag0=%08x, diag1=%08x\n",
4232 ioc->name, diag0val, diag1val));
4233 }
4234
4235 /*
4236 * Reset flag that says we've enabled event notification
4237 */
4238 ioc->facts.EventState = 0;
4239
4240 if (ioc->alt_ioc)
4241 ioc->alt_ioc->facts.EventState = 0;
4242
4243 return hard_reset_done;
4244 }
4245
4246 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4247 /**
4248 * SendIocReset - Send IOCReset request to MPT adapter.
4249 * @ioc: Pointer to MPT_ADAPTER structure
4250 * @reset_type: reset type, expected values are
4251 * %MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET or %MPI_FUNCTION_IO_UNIT_RESET
4252 * @sleepFlag: Specifies whether the process can sleep
4253 *
4254 * Send IOCReset request to the MPT adapter.
4255 *
4256 * Returns 0 for success, non-zero for failure.
4257 */
4258 static int
SendIocReset(MPT_ADAPTER * ioc,u8 reset_type,int sleepFlag)4259 SendIocReset(MPT_ADAPTER *ioc, u8 reset_type, int sleepFlag)
4260 {
4261 int r;
4262 u32 state;
4263 int cntdn, count;
4264
4265 drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOC reset(0x%02x)!\n",
4266 ioc->name, reset_type));
4267 CHIPREG_WRITE32(&ioc->chip->Doorbell, reset_type<<MPI_DOORBELL_FUNCTION_SHIFT);
4268 if ((r = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4269 return r;
4270
4271 /* FW ACK'd request, wait for READY state
4272 */
4273 count = 0;
4274 cntdn = ((sleepFlag == CAN_SLEEP) ? HZ : 1000) * 15; /* 15 seconds */
4275
4276 while ((state = mpt_GetIocState(ioc, 1)) != MPI_IOC_STATE_READY) {
4277 cntdn--;
4278 count++;
4279 if (!cntdn) {
4280 if (sleepFlag != CAN_SLEEP)
4281 count *= 10;
4282
4283 printk(MYIOC_s_ERR_FMT
4284 "Wait IOC_READY state (0x%x) timeout(%d)!\n",
4285 ioc->name, state, (int)((count+5)/HZ));
4286 return -ETIME;
4287 }
4288
4289 if (sleepFlag == CAN_SLEEP) {
4290 msleep(1);
4291 } else {
4292 mdelay (1); /* 1 msec delay */
4293 }
4294 }
4295
4296 /* TODO!
4297 * Cleanup all event stuff for this IOC; re-issue EventNotification
4298 * request if needed.
4299 */
4300 if (ioc->facts.Function)
4301 ioc->facts.EventState = 0;
4302
4303 return 0;
4304 }
4305
4306 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4307 /**
4308 * initChainBuffers - Allocate memory for and initialize chain buffers
4309 * @ioc: Pointer to MPT_ADAPTER structure
4310 *
4311 * Allocates memory for and initializes chain buffers,
4312 * chain buffer control arrays and spinlock.
4313 */
4314 static int
initChainBuffers(MPT_ADAPTER * ioc)4315 initChainBuffers(MPT_ADAPTER *ioc)
4316 {
4317 u8 *mem;
4318 int sz, ii, num_chain;
4319 int scale, num_sge, numSGE;
4320
4321 /* ReqToChain size must equal the req_depth
4322 * index = req_idx
4323 */
4324 if (ioc->ReqToChain == NULL) {
4325 sz = ioc->req_depth * sizeof(int);
4326 mem = kmalloc(sz, GFP_ATOMIC);
4327 if (mem == NULL)
4328 return -1;
4329
4330 ioc->ReqToChain = (int *) mem;
4331 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReqToChain alloc @ %p, sz=%d bytes\n",
4332 ioc->name, mem, sz));
4333 mem = kmalloc(sz, GFP_ATOMIC);
4334 if (mem == NULL)
4335 return -1;
4336
4337 ioc->RequestNB = (int *) mem;
4338 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestNB alloc @ %p, sz=%d bytes\n",
4339 ioc->name, mem, sz));
4340 }
4341 for (ii = 0; ii < ioc->req_depth; ii++) {
4342 ioc->ReqToChain[ii] = MPT_HOST_NO_CHAIN;
4343 }
4344
4345 /* ChainToChain size must equal the total number
4346 * of chain buffers to be allocated.
4347 * index = chain_idx
4348 *
4349 * Calculate the number of chain buffers needed(plus 1) per I/O
4350 * then multiply the maximum number of simultaneous cmds
4351 *
4352 * num_sge = num sge in request frame + last chain buffer
4353 * scale = num sge per chain buffer if no chain element
4354 */
4355 scale = ioc->req_sz / ioc->SGE_size;
4356 if (ioc->sg_addr_size == sizeof(u64))
4357 num_sge = scale + (ioc->req_sz - 60) / ioc->SGE_size;
4358 else
4359 num_sge = 1 + scale + (ioc->req_sz - 64) / ioc->SGE_size;
4360
4361 if (ioc->sg_addr_size == sizeof(u64)) {
4362 numSGE = (scale - 1) * (ioc->facts.MaxChainDepth-1) + scale +
4363 (ioc->req_sz - 60) / ioc->SGE_size;
4364 } else {
4365 numSGE = 1 + (scale - 1) * (ioc->facts.MaxChainDepth-1) +
4366 scale + (ioc->req_sz - 64) / ioc->SGE_size;
4367 }
4368 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n",
4369 ioc->name, num_sge, numSGE));
4370
4371 if (ioc->bus_type == FC) {
4372 if (numSGE > MPT_SCSI_FC_SG_DEPTH)
4373 numSGE = MPT_SCSI_FC_SG_DEPTH;
4374 } else {
4375 if (numSGE > MPT_SCSI_SG_DEPTH)
4376 numSGE = MPT_SCSI_SG_DEPTH;
4377 }
4378
4379 num_chain = 1;
4380 while (numSGE - num_sge > 0) {
4381 num_chain++;
4382 num_sge += (scale - 1);
4383 }
4384 num_chain++;
4385
4386 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Now numSGE=%d num_sge=%d num_chain=%d\n",
4387 ioc->name, numSGE, num_sge, num_chain));
4388
4389 if (ioc->bus_type == SPI)
4390 num_chain *= MPT_SCSI_CAN_QUEUE;
4391 else if (ioc->bus_type == SAS)
4392 num_chain *= MPT_SAS_CAN_QUEUE;
4393 else
4394 num_chain *= MPT_FC_CAN_QUEUE;
4395
4396 ioc->num_chain = num_chain;
4397
4398 sz = num_chain * sizeof(int);
4399 if (ioc->ChainToChain == NULL) {
4400 mem = kmalloc(sz, GFP_ATOMIC);
4401 if (mem == NULL)
4402 return -1;
4403
4404 ioc->ChainToChain = (int *) mem;
4405 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainToChain alloc @ %p, sz=%d bytes\n",
4406 ioc->name, mem, sz));
4407 } else {
4408 mem = (u8 *) ioc->ChainToChain;
4409 }
4410 memset(mem, 0xFF, sz);
4411 return num_chain;
4412 }
4413
4414 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4415 /**
4416 * PrimeIocFifos - Initialize IOC request and reply FIFOs.
4417 * @ioc: Pointer to MPT_ADAPTER structure
4418 *
4419 * This routine allocates memory for the MPT reply and request frame
4420 * pools (if necessary), and primes the IOC reply FIFO with
4421 * reply frames.
4422 *
4423 * Returns 0 for success, non-zero for failure.
4424 */
4425 static int
PrimeIocFifos(MPT_ADAPTER * ioc)4426 PrimeIocFifos(MPT_ADAPTER *ioc)
4427 {
4428 MPT_FRAME_HDR *mf;
4429 unsigned long flags;
4430 dma_addr_t alloc_dma;
4431 u8 *mem;
4432 int i, reply_sz, sz, total_size, num_chain;
4433 u64 dma_mask;
4434
4435 dma_mask = 0;
4436
4437 /* Prime reply FIFO... */
4438
4439 if (ioc->reply_frames == NULL) {
4440 if ( (num_chain = initChainBuffers(ioc)) < 0)
4441 return -1;
4442 /*
4443 * 1078 errata workaround for the 36GB limitation
4444 */
4445 if (ioc->pcidev->device == MPI_MANUFACTPAGE_DEVID_SAS1078 &&
4446 ioc->dma_mask > DMA_BIT_MASK(35)) {
4447 if (!pci_set_dma_mask(ioc->pcidev, DMA_BIT_MASK(32))
4448 && !pci_set_consistent_dma_mask(ioc->pcidev,
4449 DMA_BIT_MASK(32))) {
4450 dma_mask = DMA_BIT_MASK(35);
4451 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4452 "setting 35 bit addressing for "
4453 "Request/Reply/Chain and Sense Buffers\n",
4454 ioc->name));
4455 } else {
4456 /*Reseting DMA mask to 64 bit*/
4457 pci_set_dma_mask(ioc->pcidev,
4458 DMA_BIT_MASK(64));
4459 pci_set_consistent_dma_mask(ioc->pcidev,
4460 DMA_BIT_MASK(64));
4461
4462 printk(MYIOC_s_ERR_FMT
4463 "failed setting 35 bit addressing for "
4464 "Request/Reply/Chain and Sense Buffers\n",
4465 ioc->name);
4466 return -1;
4467 }
4468 }
4469
4470 total_size = reply_sz = (ioc->reply_sz * ioc->reply_depth);
4471 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n",
4472 ioc->name, ioc->reply_sz, ioc->reply_depth));
4473 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d[%x] bytes\n",
4474 ioc->name, reply_sz, reply_sz));
4475
4476 sz = (ioc->req_sz * ioc->req_depth);
4477 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d bytes, RequestDepth=%d\n",
4478 ioc->name, ioc->req_sz, ioc->req_depth));
4479 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d[%x] bytes\n",
4480 ioc->name, sz, sz));
4481 total_size += sz;
4482
4483 sz = num_chain * ioc->req_sz; /* chain buffer pool size */
4484 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d bytes, ChainDepth=%d\n",
4485 ioc->name, ioc->req_sz, num_chain));
4486 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d[%x] bytes num_chain=%d\n",
4487 ioc->name, sz, sz, num_chain));
4488
4489 total_size += sz;
4490 mem = pci_alloc_consistent(ioc->pcidev, total_size, &alloc_dma);
4491 if (mem == NULL) {
4492 printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n",
4493 ioc->name);
4494 goto out_fail;
4495 }
4496
4497 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Total alloc @ %p[%p], sz=%d[%x] bytes\n",
4498 ioc->name, mem, (void *)(ulong)alloc_dma, total_size, total_size));
4499
4500 memset(mem, 0, total_size);
4501 ioc->alloc_total += total_size;
4502 ioc->alloc = mem;
4503 ioc->alloc_dma = alloc_dma;
4504 ioc->alloc_sz = total_size;
4505 ioc->reply_frames = (MPT_FRAME_HDR *) mem;
4506 ioc->reply_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4507
4508 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4509 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4510
4511 alloc_dma += reply_sz;
4512 mem += reply_sz;
4513
4514 /* Request FIFO - WE manage this! */
4515
4516 ioc->req_frames = (MPT_FRAME_HDR *) mem;
4517 ioc->req_frames_dma = alloc_dma;
4518
4519 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffers @ %p[%p]\n",
4520 ioc->name, mem, (void *)(ulong)alloc_dma));
4521
4522 ioc->req_frames_low_dma = (u32) (alloc_dma & 0xFFFFFFFF);
4523
4524 #if defined(CONFIG_MTRR) && 0
4525 /*
4526 * Enable Write Combining MTRR for IOC's memory region.
4527 * (at least as much as we can; "size and base must be
4528 * multiples of 4 kiB"
4529 */
4530 ioc->mtrr_reg = mtrr_add(ioc->req_frames_dma,
4531 sz,
4532 MTRR_TYPE_WRCOMB, 1);
4533 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "MTRR region registered (base:size=%08x:%x)\n",
4534 ioc->name, ioc->req_frames_dma, sz));
4535 #endif
4536
4537 for (i = 0; i < ioc->req_depth; i++) {
4538 alloc_dma += ioc->req_sz;
4539 mem += ioc->req_sz;
4540 }
4541
4542 ioc->ChainBuffer = mem;
4543 ioc->ChainBufferDMA = alloc_dma;
4544
4545 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffers @ %p(%p)\n",
4546 ioc->name, ioc->ChainBuffer, (void *)(ulong)ioc->ChainBufferDMA));
4547
4548 /* Initialize the free chain Q.
4549 */
4550
4551 INIT_LIST_HEAD(&ioc->FreeChainQ);
4552
4553 /* Post the chain buffers to the FreeChainQ.
4554 */
4555 mem = (u8 *)ioc->ChainBuffer;
4556 for (i=0; i < num_chain; i++) {
4557 mf = (MPT_FRAME_HDR *) mem;
4558 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeChainQ);
4559 mem += ioc->req_sz;
4560 }
4561
4562 /* Initialize Request frames linked list
4563 */
4564 alloc_dma = ioc->req_frames_dma;
4565 mem = (u8 *) ioc->req_frames;
4566
4567 spin_lock_irqsave(&ioc->FreeQlock, flags);
4568 INIT_LIST_HEAD(&ioc->FreeQ);
4569 for (i = 0; i < ioc->req_depth; i++) {
4570 mf = (MPT_FRAME_HDR *) mem;
4571
4572 /* Queue REQUESTs *internally*! */
4573 list_add_tail(&mf->u.frame.linkage.list, &ioc->FreeQ);
4574
4575 mem += ioc->req_sz;
4576 }
4577 spin_unlock_irqrestore(&ioc->FreeQlock, flags);
4578
4579 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4580 ioc->sense_buf_pool =
4581 pci_alloc_consistent(ioc->pcidev, sz, &ioc->sense_buf_pool_dma);
4582 if (ioc->sense_buf_pool == NULL) {
4583 printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n",
4584 ioc->name);
4585 goto out_fail;
4586 }
4587
4588 ioc->sense_buf_low_dma = (u32) (ioc->sense_buf_pool_dma & 0xFFFFFFFF);
4589 ioc->alloc_total += sz;
4590 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SenseBuffers @ %p[%p]\n",
4591 ioc->name, ioc->sense_buf_pool, (void *)(ulong)ioc->sense_buf_pool_dma));
4592
4593 }
4594
4595 /* Post Reply frames to FIFO
4596 */
4597 alloc_dma = ioc->alloc_dma;
4598 dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
4599 ioc->name, ioc->reply_frames, (void *)(ulong)alloc_dma));
4600
4601 for (i = 0; i < ioc->reply_depth; i++) {
4602 /* Write each address to the IOC! */
4603 CHIPREG_WRITE32(&ioc->chip->ReplyFifo, alloc_dma);
4604 alloc_dma += ioc->reply_sz;
4605 }
4606
4607 if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
4608 ioc->dma_mask) && !pci_set_consistent_dma_mask(ioc->pcidev,
4609 ioc->dma_mask))
4610 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4611 "restoring 64 bit addressing\n", ioc->name));
4612
4613 return 0;
4614
4615 out_fail:
4616
4617 if (ioc->alloc != NULL) {
4618 sz = ioc->alloc_sz;
4619 pci_free_consistent(ioc->pcidev,
4620 sz,
4621 ioc->alloc, ioc->alloc_dma);
4622 ioc->reply_frames = NULL;
4623 ioc->req_frames = NULL;
4624 ioc->alloc_total -= sz;
4625 }
4626 if (ioc->sense_buf_pool != NULL) {
4627 sz = (ioc->req_depth * MPT_SENSE_BUFFER_ALLOC);
4628 pci_free_consistent(ioc->pcidev,
4629 sz,
4630 ioc->sense_buf_pool, ioc->sense_buf_pool_dma);
4631 ioc->sense_buf_pool = NULL;
4632 }
4633
4634 if (dma_mask == DMA_BIT_MASK(35) && !pci_set_dma_mask(ioc->pcidev,
4635 DMA_BIT_MASK(64)) && !pci_set_consistent_dma_mask(ioc->pcidev,
4636 DMA_BIT_MASK(64)))
4637 d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
4638 "restoring 64 bit addressing\n", ioc->name));
4639
4640 return -1;
4641 }
4642
4643 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4644 /**
4645 * mpt_handshake_req_reply_wait - Send MPT request to and receive reply
4646 * from IOC via doorbell handshake method.
4647 * @ioc: Pointer to MPT_ADAPTER structure
4648 * @reqBytes: Size of the request in bytes
4649 * @req: Pointer to MPT request frame
4650 * @replyBytes: Expected size of the reply in bytes
4651 * @u16reply: Pointer to area where reply should be written
4652 * @maxwait: Max wait time for a reply (in seconds)
4653 * @sleepFlag: Specifies whether the process can sleep
4654 *
4655 * NOTES: It is the callers responsibility to byte-swap fields in the
4656 * request which are greater than 1 byte in size. It is also the
4657 * callers responsibility to byte-swap response fields which are
4658 * greater than 1 byte in size.
4659 *
4660 * Returns 0 for success, non-zero for failure.
4661 */
4662 static int
mpt_handshake_req_reply_wait(MPT_ADAPTER * ioc,int reqBytes,u32 * req,int replyBytes,u16 * u16reply,int maxwait,int sleepFlag)4663 mpt_handshake_req_reply_wait(MPT_ADAPTER *ioc, int reqBytes, u32 *req,
4664 int replyBytes, u16 *u16reply, int maxwait, int sleepFlag)
4665 {
4666 MPIDefaultReply_t *mptReply;
4667 int failcnt = 0;
4668 int t;
4669
4670 /*
4671 * Get ready to cache a handshake reply
4672 */
4673 ioc->hs_reply_idx = 0;
4674 mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4675 mptReply->MsgLength = 0;
4676
4677 /*
4678 * Make sure there are no doorbells (WRITE 0 to IntStatus reg),
4679 * then tell IOC that we want to handshake a request of N words.
4680 * (WRITE u32val to Doorbell reg).
4681 */
4682 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4683 CHIPREG_WRITE32(&ioc->chip->Doorbell,
4684 ((MPI_FUNCTION_HANDSHAKE<<MPI_DOORBELL_FUNCTION_SHIFT) |
4685 ((reqBytes/4)<<MPI_DOORBELL_ADD_DWORDS_SHIFT)));
4686
4687 /*
4688 * Wait for IOC's doorbell handshake int
4689 */
4690 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4691 failcnt++;
4692
4693 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n",
4694 ioc->name, reqBytes, t, failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4695
4696 /* Read doorbell and check for active bit */
4697 if (!(CHIPREG_READ32(&ioc->chip->Doorbell) & MPI_DOORBELL_ACTIVE))
4698 return -1;
4699
4700 /*
4701 * Clear doorbell int (WRITE 0 to IntStatus reg),
4702 * then wait for IOC to ACKnowledge that it's ready for
4703 * our handshake request.
4704 */
4705 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4706 if (!failcnt && (t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4707 failcnt++;
4708
4709 if (!failcnt) {
4710 int ii;
4711 u8 *req_as_bytes = (u8 *) req;
4712
4713 /*
4714 * Stuff request words via doorbell handshake,
4715 * with ACK from IOC for each.
4716 */
4717 for (ii = 0; !failcnt && ii < reqBytes/4; ii++) {
4718 u32 word = ((req_as_bytes[(ii*4) + 0] << 0) |
4719 (req_as_bytes[(ii*4) + 1] << 8) |
4720 (req_as_bytes[(ii*4) + 2] << 16) |
4721 (req_as_bytes[(ii*4) + 3] << 24));
4722
4723 CHIPREG_WRITE32(&ioc->chip->Doorbell, word);
4724 if ((t = WaitForDoorbellAck(ioc, 5, sleepFlag)) < 0)
4725 failcnt++;
4726 }
4727
4728 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handshake request frame (@%p) header\n", ioc->name, req));
4729 DBG_DUMP_REQUEST_FRAME_HDR(ioc, (u32 *)req);
4730
4731 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request post done, WaitCnt=%d%s\n",
4732 ioc->name, t, failcnt ? " - MISSING DOORBELL ACK!" : ""));
4733
4734 /*
4735 * Wait for completion of doorbell handshake reply from the IOC
4736 */
4737 if (!failcnt && (t = WaitForDoorbellReply(ioc, maxwait, sleepFlag)) < 0)
4738 failcnt++;
4739
4740 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake reply count=%d%s\n",
4741 ioc->name, t, failcnt ? " - MISSING DOORBELL REPLY!" : ""));
4742
4743 /*
4744 * Copy out the cached reply...
4745 */
4746 for (ii=0; ii < min(replyBytes/2,mptReply->MsgLength*2); ii++)
4747 u16reply[ii] = ioc->hs_reply[ii];
4748 } else {
4749 return -99;
4750 }
4751
4752 return -failcnt;
4753 }
4754
4755 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4756 /**
4757 * WaitForDoorbellAck - Wait for IOC doorbell handshake acknowledge
4758 * @ioc: Pointer to MPT_ADAPTER structure
4759 * @howlong: How long to wait (in seconds)
4760 * @sleepFlag: Specifies whether the process can sleep
4761 *
4762 * This routine waits (up to ~2 seconds max) for IOC doorbell
4763 * handshake ACKnowledge, indicated by the IOP_DOORBELL_STATUS
4764 * bit in its IntStatus register being clear.
4765 *
4766 * Returns a negative value on failure, else wait loop count.
4767 */
4768 static int
WaitForDoorbellAck(MPT_ADAPTER * ioc,int howlong,int sleepFlag)4769 WaitForDoorbellAck(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4770 {
4771 int cntdn;
4772 int count = 0;
4773 u32 intstat=0;
4774
4775 cntdn = 1000 * howlong;
4776
4777 if (sleepFlag == CAN_SLEEP) {
4778 while (--cntdn) {
4779 msleep (1);
4780 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4781 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4782 break;
4783 count++;
4784 }
4785 } else {
4786 while (--cntdn) {
4787 udelay (1000);
4788 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4789 if (! (intstat & MPI_HIS_IOP_DOORBELL_STATUS))
4790 break;
4791 count++;
4792 }
4793 }
4794
4795 if (cntdn) {
4796 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell ACK (count=%d)\n",
4797 ioc->name, count));
4798 return count;
4799 }
4800
4801 printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n",
4802 ioc->name, count, intstat);
4803 return -1;
4804 }
4805
4806 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4807 /**
4808 * WaitForDoorbellInt - Wait for IOC to set its doorbell interrupt bit
4809 * @ioc: Pointer to MPT_ADAPTER structure
4810 * @howlong: How long to wait (in seconds)
4811 * @sleepFlag: Specifies whether the process can sleep
4812 *
4813 * This routine waits (up to ~2 seconds max) for IOC doorbell interrupt
4814 * (MPI_HIS_DOORBELL_INTERRUPT) to be set in the IntStatus register.
4815 *
4816 * Returns a negative value on failure, else wait loop count.
4817 */
4818 static int
WaitForDoorbellInt(MPT_ADAPTER * ioc,int howlong,int sleepFlag)4819 WaitForDoorbellInt(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4820 {
4821 int cntdn;
4822 int count = 0;
4823 u32 intstat=0;
4824
4825 cntdn = 1000 * howlong;
4826 if (sleepFlag == CAN_SLEEP) {
4827 while (--cntdn) {
4828 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4829 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4830 break;
4831 msleep(1);
4832 count++;
4833 }
4834 } else {
4835 while (--cntdn) {
4836 intstat = CHIPREG_READ32(&ioc->chip->IntStatus);
4837 if (intstat & MPI_HIS_DOORBELL_INTERRUPT)
4838 break;
4839 udelay (1000);
4840 count++;
4841 }
4842 }
4843
4844 if (cntdn) {
4845 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n",
4846 ioc->name, count, howlong));
4847 return count;
4848 }
4849
4850 printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n",
4851 ioc->name, count, intstat);
4852 return -1;
4853 }
4854
4855 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4856 /**
4857 * WaitForDoorbellReply - Wait for and capture an IOC handshake reply.
4858 * @ioc: Pointer to MPT_ADAPTER structure
4859 * @howlong: How long to wait (in seconds)
4860 * @sleepFlag: Specifies whether the process can sleep
4861 *
4862 * This routine polls the IOC for a handshake reply, 16 bits at a time.
4863 * Reply is cached to IOC private area large enough to hold a maximum
4864 * of 128 bytes of reply data.
4865 *
4866 * Returns a negative value on failure, else size of reply in WORDS.
4867 */
4868 static int
WaitForDoorbellReply(MPT_ADAPTER * ioc,int howlong,int sleepFlag)4869 WaitForDoorbellReply(MPT_ADAPTER *ioc, int howlong, int sleepFlag)
4870 {
4871 int u16cnt = 0;
4872 int failcnt = 0;
4873 int t;
4874 u16 *hs_reply = ioc->hs_reply;
4875 volatile MPIDefaultReply_t *mptReply = (MPIDefaultReply_t *) ioc->hs_reply;
4876 u16 hword;
4877
4878 hs_reply[0] = hs_reply[1] = hs_reply[7] = 0;
4879
4880 /*
4881 * Get first two u16's so we can look at IOC's intended reply MsgLength
4882 */
4883 u16cnt=0;
4884 if ((t = WaitForDoorbellInt(ioc, howlong, sleepFlag)) < 0) {
4885 failcnt++;
4886 } else {
4887 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4888 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4889 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4890 failcnt++;
4891 else {
4892 hs_reply[u16cnt++] = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4893 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4894 }
4895 }
4896
4897 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitCnt=%d First handshake reply word=%08x%s\n",
4898 ioc->name, t, le32_to_cpu(*(u32 *)hs_reply),
4899 failcnt ? " - MISSING DOORBELL HANDSHAKE!" : ""));
4900
4901 /*
4902 * If no error (and IOC said MsgLength is > 0), piece together
4903 * reply 16 bits at a time.
4904 */
4905 for (u16cnt=2; !failcnt && u16cnt < (2 * mptReply->MsgLength); u16cnt++) {
4906 if ((t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4907 failcnt++;
4908 hword = le16_to_cpu(CHIPREG_READ32(&ioc->chip->Doorbell) & 0x0000FFFF);
4909 /* don't overflow our IOC hs_reply[] buffer! */
4910 if (u16cnt < ARRAY_SIZE(ioc->hs_reply))
4911 hs_reply[u16cnt] = hword;
4912 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4913 }
4914
4915 if (!failcnt && (t = WaitForDoorbellInt(ioc, 5, sleepFlag)) < 0)
4916 failcnt++;
4917 CHIPREG_WRITE32(&ioc->chip->IntStatus, 0);
4918
4919 if (failcnt) {
4920 printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n",
4921 ioc->name);
4922 return -failcnt;
4923 }
4924 #if 0
4925 else if (u16cnt != (2 * mptReply->MsgLength)) {
4926 return -101;
4927 }
4928 else if ((mptReply->IOCStatus & MPI_IOCSTATUS_MASK) != MPI_IOCSTATUS_SUCCESS) {
4929 return -102;
4930 }
4931 #endif
4932
4933 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got Handshake reply:\n", ioc->name));
4934 DBG_DUMP_REPLY_FRAME(ioc, (u32 *)mptReply);
4935
4936 dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n",
4937 ioc->name, t, u16cnt/2));
4938 return u16cnt/2;
4939 }
4940
4941 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
4942 /**
4943 * GetLanConfigPages - Fetch LANConfig pages.
4944 * @ioc: Pointer to MPT_ADAPTER structure
4945 *
4946 * Return: 0 for success
4947 * -ENOMEM if no memory available
4948 * -EPERM if not allowed due to ISR context
4949 * -EAGAIN if no msg frames currently available
4950 * -EFAULT for non-successful reply or no reply (timeout)
4951 */
4952 static int
GetLanConfigPages(MPT_ADAPTER * ioc)4953 GetLanConfigPages(MPT_ADAPTER *ioc)
4954 {
4955 ConfigPageHeader_t hdr;
4956 CONFIGPARMS cfg;
4957 LANPage0_t *ppage0_alloc;
4958 dma_addr_t page0_dma;
4959 LANPage1_t *ppage1_alloc;
4960 dma_addr_t page1_dma;
4961 int rc = 0;
4962 int data_sz;
4963 int copy_sz;
4964
4965 /* Get LAN Page 0 header */
4966 hdr.PageVersion = 0;
4967 hdr.PageLength = 0;
4968 hdr.PageNumber = 0;
4969 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
4970 cfg.cfghdr.hdr = &hdr;
4971 cfg.physAddr = -1;
4972 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
4973 cfg.dir = 0;
4974 cfg.pageAddr = 0;
4975 cfg.timeout = 0;
4976
4977 if ((rc = mpt_config(ioc, &cfg)) != 0)
4978 return rc;
4979
4980 if (hdr.PageLength > 0) {
4981 data_sz = hdr.PageLength * 4;
4982 ppage0_alloc = (LANPage0_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page0_dma);
4983 rc = -ENOMEM;
4984 if (ppage0_alloc) {
4985 memset((u8 *)ppage0_alloc, 0, data_sz);
4986 cfg.physAddr = page0_dma;
4987 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
4988
4989 if ((rc = mpt_config(ioc, &cfg)) == 0) {
4990 /* save the data */
4991 copy_sz = min_t(int, sizeof(LANPage0_t), data_sz);
4992 memcpy(&ioc->lan_cnfg_page0, ppage0_alloc, copy_sz);
4993
4994 }
4995
4996 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage0_alloc, page0_dma);
4997
4998 /* FIXME!
4999 * Normalize endianness of structure data,
5000 * by byte-swapping all > 1 byte fields!
5001 */
5002
5003 }
5004
5005 if (rc)
5006 return rc;
5007 }
5008
5009 /* Get LAN Page 1 header */
5010 hdr.PageVersion = 0;
5011 hdr.PageLength = 0;
5012 hdr.PageNumber = 1;
5013 hdr.PageType = MPI_CONFIG_PAGETYPE_LAN;
5014 cfg.cfghdr.hdr = &hdr;
5015 cfg.physAddr = -1;
5016 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5017 cfg.dir = 0;
5018 cfg.pageAddr = 0;
5019
5020 if ((rc = mpt_config(ioc, &cfg)) != 0)
5021 return rc;
5022
5023 if (hdr.PageLength == 0)
5024 return 0;
5025
5026 data_sz = hdr.PageLength * 4;
5027 rc = -ENOMEM;
5028 ppage1_alloc = (LANPage1_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page1_dma);
5029 if (ppage1_alloc) {
5030 memset((u8 *)ppage1_alloc, 0, data_sz);
5031 cfg.physAddr = page1_dma;
5032 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5033
5034 if ((rc = mpt_config(ioc, &cfg)) == 0) {
5035 /* save the data */
5036 copy_sz = min_t(int, sizeof(LANPage1_t), data_sz);
5037 memcpy(&ioc->lan_cnfg_page1, ppage1_alloc, copy_sz);
5038 }
5039
5040 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage1_alloc, page1_dma);
5041
5042 /* FIXME!
5043 * Normalize endianness of structure data,
5044 * by byte-swapping all > 1 byte fields!
5045 */
5046
5047 }
5048
5049 return rc;
5050 }
5051
5052 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5053 /**
5054 * mptbase_sas_persist_operation - Perform operation on SAS Persistent Table
5055 * @ioc: Pointer to MPT_ADAPTER structure
5056 * @persist_opcode: see below
5057 *
5058 * MPI_SAS_OP_CLEAR_NOT_PRESENT - Free all persist TargetID mappings for
5059 * devices not currently present.
5060 * MPI_SAS_OP_CLEAR_ALL_PERSISTENT - Clear al persist TargetID mappings
5061 *
5062 * NOTE: Don't use not this function during interrupt time.
5063 *
5064 * Returns 0 for success, non-zero error
5065 */
5066
5067 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5068 int
mptbase_sas_persist_operation(MPT_ADAPTER * ioc,u8 persist_opcode)5069 mptbase_sas_persist_operation(MPT_ADAPTER *ioc, u8 persist_opcode)
5070 {
5071 SasIoUnitControlRequest_t *sasIoUnitCntrReq;
5072 SasIoUnitControlReply_t *sasIoUnitCntrReply;
5073 MPT_FRAME_HDR *mf = NULL;
5074 MPIHeader_t *mpi_hdr;
5075 int ret = 0;
5076 unsigned long timeleft;
5077
5078 mutex_lock(&ioc->mptbase_cmds.mutex);
5079
5080 /* init the internal cmd struct */
5081 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
5082 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
5083
5084 /* insure garbage is not sent to fw */
5085 switch(persist_opcode) {
5086
5087 case MPI_SAS_OP_CLEAR_NOT_PRESENT:
5088 case MPI_SAS_OP_CLEAR_ALL_PERSISTENT:
5089 break;
5090
5091 default:
5092 ret = -1;
5093 goto out;
5094 }
5095
5096 printk(KERN_DEBUG "%s: persist_opcode=%x\n",
5097 __func__, persist_opcode);
5098
5099 /* Get a MF for this command.
5100 */
5101 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
5102 printk(KERN_DEBUG "%s: no msg frames!\n", __func__);
5103 ret = -1;
5104 goto out;
5105 }
5106
5107 mpi_hdr = (MPIHeader_t *) mf;
5108 sasIoUnitCntrReq = (SasIoUnitControlRequest_t *)mf;
5109 memset(sasIoUnitCntrReq,0,sizeof(SasIoUnitControlRequest_t));
5110 sasIoUnitCntrReq->Function = MPI_FUNCTION_SAS_IO_UNIT_CONTROL;
5111 sasIoUnitCntrReq->MsgContext = mpi_hdr->MsgContext;
5112 sasIoUnitCntrReq->Operation = persist_opcode;
5113
5114 mpt_put_msg_frame(mpt_base_index, ioc, mf);
5115 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done, 10*HZ);
5116 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
5117 ret = -ETIME;
5118 printk(KERN_DEBUG "%s: failed\n", __func__);
5119 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
5120 goto out;
5121 if (!timeleft) {
5122 printk(MYIOC_s_WARN_FMT
5123 "Issuing Reset from %s!!, doorbell=0x%08x\n",
5124 ioc->name, __func__, mpt_GetIocState(ioc, 0));
5125 mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP);
5126 mpt_free_msg_frame(ioc, mf);
5127 }
5128 goto out;
5129 }
5130
5131 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
5132 ret = -1;
5133 goto out;
5134 }
5135
5136 sasIoUnitCntrReply =
5137 (SasIoUnitControlReply_t *)ioc->mptbase_cmds.reply;
5138 if (le16_to_cpu(sasIoUnitCntrReply->IOCStatus) != MPI_IOCSTATUS_SUCCESS) {
5139 printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
5140 __func__, sasIoUnitCntrReply->IOCStatus,
5141 sasIoUnitCntrReply->IOCLogInfo);
5142 printk(KERN_DEBUG "%s: failed\n", __func__);
5143 ret = -1;
5144 } else
5145 printk(KERN_DEBUG "%s: success\n", __func__);
5146 out:
5147
5148 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
5149 mutex_unlock(&ioc->mptbase_cmds.mutex);
5150 return ret;
5151 }
5152
5153 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5154
5155 static void
mptbase_raid_process_event_data(MPT_ADAPTER * ioc,MpiEventDataRaid_t * pRaidEventData)5156 mptbase_raid_process_event_data(MPT_ADAPTER *ioc,
5157 MpiEventDataRaid_t * pRaidEventData)
5158 {
5159 int volume;
5160 int reason;
5161 int disk;
5162 int status;
5163 int flags;
5164 int state;
5165
5166 volume = pRaidEventData->VolumeID;
5167 reason = pRaidEventData->ReasonCode;
5168 disk = pRaidEventData->PhysDiskNum;
5169 status = le32_to_cpu(pRaidEventData->SettingsStatus);
5170 flags = (status >> 0) & 0xff;
5171 state = (status >> 8) & 0xff;
5172
5173 if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) {
5174 return;
5175 }
5176
5177 if ((reason >= MPI_EVENT_RAID_RC_PHYSDISK_CREATED &&
5178 reason <= MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED) ||
5179 (reason == MPI_EVENT_RAID_RC_SMART_DATA)) {
5180 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n",
5181 ioc->name, disk, volume);
5182 } else {
5183 printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n",
5184 ioc->name, volume);
5185 }
5186
5187 switch(reason) {
5188 case MPI_EVENT_RAID_RC_VOLUME_CREATED:
5189 printk(MYIOC_s_INFO_FMT " volume has been created\n",
5190 ioc->name);
5191 break;
5192
5193 case MPI_EVENT_RAID_RC_VOLUME_DELETED:
5194
5195 printk(MYIOC_s_INFO_FMT " volume has been deleted\n",
5196 ioc->name);
5197 break;
5198
5199 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED:
5200 printk(MYIOC_s_INFO_FMT " volume settings have been changed\n",
5201 ioc->name);
5202 break;
5203
5204 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED:
5205 printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n",
5206 ioc->name,
5207 state == MPI_RAIDVOL0_STATUS_STATE_OPTIMAL
5208 ? "optimal"
5209 : state == MPI_RAIDVOL0_STATUS_STATE_DEGRADED
5210 ? "degraded"
5211 : state == MPI_RAIDVOL0_STATUS_STATE_FAILED
5212 ? "failed"
5213 : "state unknown",
5214 flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED
5215 ? ", enabled" : "",
5216 flags & MPI_RAIDVOL0_STATUS_FLAG_QUIESCED
5217 ? ", quiesced" : "",
5218 flags & MPI_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS
5219 ? ", resync in progress" : "" );
5220 break;
5221
5222 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED:
5223 printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n",
5224 ioc->name, disk);
5225 break;
5226
5227 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED:
5228 printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n",
5229 ioc->name);
5230 break;
5231
5232 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED:
5233 printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n",
5234 ioc->name);
5235 break;
5236
5237 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED:
5238 printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n",
5239 ioc->name);
5240 break;
5241
5242 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED:
5243 printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n",
5244 ioc->name,
5245 state == MPI_PHYSDISK0_STATUS_ONLINE
5246 ? "online"
5247 : state == MPI_PHYSDISK0_STATUS_MISSING
5248 ? "missing"
5249 : state == MPI_PHYSDISK0_STATUS_NOT_COMPATIBLE
5250 ? "not compatible"
5251 : state == MPI_PHYSDISK0_STATUS_FAILED
5252 ? "failed"
5253 : state == MPI_PHYSDISK0_STATUS_INITIALIZING
5254 ? "initializing"
5255 : state == MPI_PHYSDISK0_STATUS_OFFLINE_REQUESTED
5256 ? "offline requested"
5257 : state == MPI_PHYSDISK0_STATUS_FAILED_REQUESTED
5258 ? "failed requested"
5259 : state == MPI_PHYSDISK0_STATUS_OTHER_OFFLINE
5260 ? "offline"
5261 : "state unknown",
5262 flags & MPI_PHYSDISK0_STATUS_FLAG_OUT_OF_SYNC
5263 ? ", out of sync" : "",
5264 flags & MPI_PHYSDISK0_STATUS_FLAG_QUIESCED
5265 ? ", quiesced" : "" );
5266 break;
5267
5268 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED:
5269 printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n",
5270 ioc->name, disk);
5271 break;
5272
5273 case MPI_EVENT_RAID_RC_SMART_DATA:
5274 printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n",
5275 ioc->name, pRaidEventData->ASC, pRaidEventData->ASCQ);
5276 break;
5277
5278 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED:
5279 printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n",
5280 ioc->name, disk);
5281 break;
5282 }
5283 }
5284
5285 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5286 /**
5287 * GetIoUnitPage2 - Retrieve BIOS version and boot order information.
5288 * @ioc: Pointer to MPT_ADAPTER structure
5289 *
5290 * Returns: 0 for success
5291 * -ENOMEM if no memory available
5292 * -EPERM if not allowed due to ISR context
5293 * -EAGAIN if no msg frames currently available
5294 * -EFAULT for non-successful reply or no reply (timeout)
5295 */
5296 static int
GetIoUnitPage2(MPT_ADAPTER * ioc)5297 GetIoUnitPage2(MPT_ADAPTER *ioc)
5298 {
5299 ConfigPageHeader_t hdr;
5300 CONFIGPARMS cfg;
5301 IOUnitPage2_t *ppage_alloc;
5302 dma_addr_t page_dma;
5303 int data_sz;
5304 int rc;
5305
5306 /* Get the page header */
5307 hdr.PageVersion = 0;
5308 hdr.PageLength = 0;
5309 hdr.PageNumber = 2;
5310 hdr.PageType = MPI_CONFIG_PAGETYPE_IO_UNIT;
5311 cfg.cfghdr.hdr = &hdr;
5312 cfg.physAddr = -1;
5313 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5314 cfg.dir = 0;
5315 cfg.pageAddr = 0;
5316 cfg.timeout = 0;
5317
5318 if ((rc = mpt_config(ioc, &cfg)) != 0)
5319 return rc;
5320
5321 if (hdr.PageLength == 0)
5322 return 0;
5323
5324 /* Read the config page */
5325 data_sz = hdr.PageLength * 4;
5326 rc = -ENOMEM;
5327 ppage_alloc = (IOUnitPage2_t *) pci_alloc_consistent(ioc->pcidev, data_sz, &page_dma);
5328 if (ppage_alloc) {
5329 memset((u8 *)ppage_alloc, 0, data_sz);
5330 cfg.physAddr = page_dma;
5331 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5332
5333 /* If Good, save data */
5334 if ((rc = mpt_config(ioc, &cfg)) == 0)
5335 ioc->biosVersion = le32_to_cpu(ppage_alloc->BiosVersion);
5336
5337 pci_free_consistent(ioc->pcidev, data_sz, (u8 *) ppage_alloc, page_dma);
5338 }
5339
5340 return rc;
5341 }
5342
5343 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5344 /**
5345 * mpt_GetScsiPortSettings - read SCSI Port Page 0 and 2
5346 * @ioc: Pointer to a Adapter Strucutre
5347 * @portnum: IOC port number
5348 *
5349 * Return: -EFAULT if read of config page header fails
5350 * or if no nvram
5351 * If read of SCSI Port Page 0 fails,
5352 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
5353 * Adapter settings: async, narrow
5354 * Return 1
5355 * If read of SCSI Port Page 2 fails,
5356 * Adapter settings valid
5357 * NVRAM = MPT_HOST_NVRAM_INVALID (0xFFFFFFFF)
5358 * Return 1
5359 * Else
5360 * Both valid
5361 * Return 0
5362 * CHECK - what type of locking mechanisms should be used????
5363 */
5364 static int
mpt_GetScsiPortSettings(MPT_ADAPTER * ioc,int portnum)5365 mpt_GetScsiPortSettings(MPT_ADAPTER *ioc, int portnum)
5366 {
5367 u8 *pbuf;
5368 dma_addr_t buf_dma;
5369 CONFIGPARMS cfg;
5370 ConfigPageHeader_t header;
5371 int ii;
5372 int data, rc = 0;
5373
5374 /* Allocate memory
5375 */
5376 if (!ioc->spi_data.nvram) {
5377 int sz;
5378 u8 *mem;
5379 sz = MPT_MAX_SCSI_DEVICES * sizeof(int);
5380 mem = kmalloc(sz, GFP_ATOMIC);
5381 if (mem == NULL)
5382 return -EFAULT;
5383
5384 ioc->spi_data.nvram = (int *) mem;
5385
5386 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SCSI device NVRAM settings @ %p, sz=%d\n",
5387 ioc->name, ioc->spi_data.nvram, sz));
5388 }
5389
5390 /* Invalidate NVRAM information
5391 */
5392 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5393 ioc->spi_data.nvram[ii] = MPT_HOST_NVRAM_INVALID;
5394 }
5395
5396 /* Read SPP0 header, allocate memory, then read page.
5397 */
5398 header.PageVersion = 0;
5399 header.PageLength = 0;
5400 header.PageNumber = 0;
5401 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5402 cfg.cfghdr.hdr = &header;
5403 cfg.physAddr = -1;
5404 cfg.pageAddr = portnum;
5405 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5406 cfg.dir = 0;
5407 cfg.timeout = 0; /* use default */
5408 if (mpt_config(ioc, &cfg) != 0)
5409 return -EFAULT;
5410
5411 if (header.PageLength > 0) {
5412 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
5413 if (pbuf) {
5414 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5415 cfg.physAddr = buf_dma;
5416 if (mpt_config(ioc, &cfg) != 0) {
5417 ioc->spi_data.maxBusWidth = MPT_NARROW;
5418 ioc->spi_data.maxSyncOffset = 0;
5419 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5420 ioc->spi_data.busType = MPT_HOST_BUS_UNKNOWN;
5421 rc = 1;
5422 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5423 "Unable to read PortPage0 minSyncFactor=%x\n",
5424 ioc->name, ioc->spi_data.minSyncFactor));
5425 } else {
5426 /* Save the Port Page 0 data
5427 */
5428 SCSIPortPage0_t *pPP0 = (SCSIPortPage0_t *) pbuf;
5429 pPP0->Capabilities = le32_to_cpu(pPP0->Capabilities);
5430 pPP0->PhysicalInterface = le32_to_cpu(pPP0->PhysicalInterface);
5431
5432 if ( (pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_QAS) == 0 ) {
5433 ioc->spi_data.noQas |= MPT_TARGET_NO_NEGO_QAS;
5434 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5435 "noQas due to Capabilities=%x\n",
5436 ioc->name, pPP0->Capabilities));
5437 }
5438 ioc->spi_data.maxBusWidth = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_WIDE ? 1 : 0;
5439 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MAX_SYNC_OFFSET_MASK;
5440 if (data) {
5441 ioc->spi_data.maxSyncOffset = (u8) (data >> 16);
5442 data = pPP0->Capabilities & MPI_SCSIPORTPAGE0_CAP_MIN_SYNC_PERIOD_MASK;
5443 ioc->spi_data.minSyncFactor = (u8) (data >> 8);
5444 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5445 "PortPage0 minSyncFactor=%x\n",
5446 ioc->name, ioc->spi_data.minSyncFactor));
5447 } else {
5448 ioc->spi_data.maxSyncOffset = 0;
5449 ioc->spi_data.minSyncFactor = MPT_ASYNC;
5450 }
5451
5452 ioc->spi_data.busType = pPP0->PhysicalInterface & MPI_SCSIPORTPAGE0_PHY_SIGNAL_TYPE_MASK;
5453
5454 /* Update the minSyncFactor based on bus type.
5455 */
5456 if ((ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_HVD) ||
5457 (ioc->spi_data.busType == MPI_SCSIPORTPAGE0_PHY_SIGNAL_SE)) {
5458
5459 if (ioc->spi_data.minSyncFactor < MPT_ULTRA) {
5460 ioc->spi_data.minSyncFactor = MPT_ULTRA;
5461 ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
5462 "HVD or SE detected, minSyncFactor=%x\n",
5463 ioc->name, ioc->spi_data.minSyncFactor));
5464 }
5465 }
5466 }
5467 if (pbuf) {
5468 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
5469 }
5470 }
5471 }
5472
5473 /* SCSI Port Page 2 - Read the header then the page.
5474 */
5475 header.PageVersion = 0;
5476 header.PageLength = 0;
5477 header.PageNumber = 2;
5478 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_PORT;
5479 cfg.cfghdr.hdr = &header;
5480 cfg.physAddr = -1;
5481 cfg.pageAddr = portnum;
5482 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5483 cfg.dir = 0;
5484 if (mpt_config(ioc, &cfg) != 0)
5485 return -EFAULT;
5486
5487 if (header.PageLength > 0) {
5488 /* Allocate memory and read SCSI Port Page 2
5489 */
5490 pbuf = pci_alloc_consistent(ioc->pcidev, header.PageLength * 4, &buf_dma);
5491 if (pbuf) {
5492 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_NVRAM;
5493 cfg.physAddr = buf_dma;
5494 if (mpt_config(ioc, &cfg) != 0) {
5495 /* Nvram data is left with INVALID mark
5496 */
5497 rc = 1;
5498 } else if (ioc->pcidev->vendor == PCI_VENDOR_ID_ATTO) {
5499
5500 /* This is an ATTO adapter, read Page2 accordingly
5501 */
5502 ATTO_SCSIPortPage2_t *pPP2 = (ATTO_SCSIPortPage2_t *) pbuf;
5503 ATTODeviceInfo_t *pdevice = NULL;
5504 u16 ATTOFlags;
5505
5506 /* Save the Port Page 2 data
5507 * (reformat into a 32bit quantity)
5508 */
5509 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5510 pdevice = &pPP2->DeviceSettings[ii];
5511 ATTOFlags = le16_to_cpu(pdevice->ATTOFlags);
5512 data = 0;
5513
5514 /* Translate ATTO device flags to LSI format
5515 */
5516 if (ATTOFlags & ATTOFLAG_DISC)
5517 data |= (MPI_SCSIPORTPAGE2_DEVICE_DISCONNECT_ENABLE);
5518 if (ATTOFlags & ATTOFLAG_ID_ENB)
5519 data |= (MPI_SCSIPORTPAGE2_DEVICE_ID_SCAN_ENABLE);
5520 if (ATTOFlags & ATTOFLAG_LUN_ENB)
5521 data |= (MPI_SCSIPORTPAGE2_DEVICE_LUN_SCAN_ENABLE);
5522 if (ATTOFlags & ATTOFLAG_TAGGED)
5523 data |= (MPI_SCSIPORTPAGE2_DEVICE_TAG_QUEUE_ENABLE);
5524 if (!(ATTOFlags & ATTOFLAG_WIDE_ENB))
5525 data |= (MPI_SCSIPORTPAGE2_DEVICE_WIDE_DISABLE);
5526
5527 data = (data << 16) | (pdevice->Period << 8) | 10;
5528 ioc->spi_data.nvram[ii] = data;
5529 }
5530 } else {
5531 SCSIPortPage2_t *pPP2 = (SCSIPortPage2_t *) pbuf;
5532 MpiDeviceInfo_t *pdevice = NULL;
5533
5534 /*
5535 * Save "Set to Avoid SCSI Bus Resets" flag
5536 */
5537 ioc->spi_data.bus_reset =
5538 (le32_to_cpu(pPP2->PortFlags) &
5539 MPI_SCSIPORTPAGE2_PORT_FLAGS_AVOID_SCSI_RESET) ?
5540 0 : 1 ;
5541
5542 /* Save the Port Page 2 data
5543 * (reformat into a 32bit quantity)
5544 */
5545 data = le32_to_cpu(pPP2->PortFlags) & MPI_SCSIPORTPAGE2_PORT_FLAGS_DV_MASK;
5546 ioc->spi_data.PortFlags = data;
5547 for (ii=0; ii < MPT_MAX_SCSI_DEVICES; ii++) {
5548 pdevice = &pPP2->DeviceSettings[ii];
5549 data = (le16_to_cpu(pdevice->DeviceFlags) << 16) |
5550 (pdevice->SyncFactor << 8) | pdevice->Timeout;
5551 ioc->spi_data.nvram[ii] = data;
5552 }
5553 }
5554
5555 pci_free_consistent(ioc->pcidev, header.PageLength * 4, pbuf, buf_dma);
5556 }
5557 }
5558
5559 /* Update Adapter limits with those from NVRAM
5560 * Comment: Don't need to do this. Target performance
5561 * parameters will never exceed the adapters limits.
5562 */
5563
5564 return rc;
5565 }
5566
5567 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
5568 /**
5569 * mpt_readScsiDevicePageHeaders - save version and length of SDP1
5570 * @ioc: Pointer to a Adapter Strucutre
5571 * @portnum: IOC port number
5572 *
5573 * Return: -EFAULT if read of config page header fails
5574 * or 0 if success.
5575 */
5576 static int
mpt_readScsiDevicePageHeaders(MPT_ADAPTER * ioc,int portnum)5577 mpt_readScsiDevicePageHeaders(MPT_ADAPTER *ioc, int portnum)
5578 {
5579 CONFIGPARMS cfg;
5580 ConfigPageHeader_t header;
5581
5582 /* Read the SCSI Device Page 1 header
5583 */
5584 header.PageVersion = 0;
5585 header.PageLength = 0;
5586 header.PageNumber = 1;
5587 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5588 cfg.cfghdr.hdr = &header;
5589 cfg.physAddr = -1;
5590 cfg.pageAddr = portnum;
5591 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5592 cfg.dir = 0;
5593 cfg.timeout = 0;
5594 if (mpt_config(ioc, &cfg) != 0)
5595 return -EFAULT;
5596
5597 ioc->spi_data.sdp1version = cfg.cfghdr.hdr->PageVersion;
5598 ioc->spi_data.sdp1length = cfg.cfghdr.hdr->PageLength;
5599
5600 header.PageVersion = 0;
5601 header.PageLength = 0;
5602 header.PageNumber = 0;
5603 header.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
5604 if (mpt_config(ioc, &cfg) != 0)
5605 return -EFAULT;
5606
5607 ioc->spi_data.sdp0version = cfg.cfghdr.hdr->PageVersion;
5608 ioc->spi_data.sdp0length = cfg.cfghdr.hdr->PageLength;
5609
5610 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 0: version %d length %d\n",
5611 ioc->name, ioc->spi_data.sdp0version, ioc->spi_data.sdp0length));
5612
5613 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 1: version %d length %d\n",
5614 ioc->name, ioc->spi_data.sdp1version, ioc->spi_data.sdp1length));
5615 return 0;
5616 }
5617
5618 /**
5619 * mpt_inactive_raid_list_free - This clears this link list.
5620 * @ioc : pointer to per adapter structure
5621 **/
5622 static void
mpt_inactive_raid_list_free(MPT_ADAPTER * ioc)5623 mpt_inactive_raid_list_free(MPT_ADAPTER *ioc)
5624 {
5625 struct inactive_raid_component_info *component_info, *pNext;
5626
5627 if (list_empty(&ioc->raid_data.inactive_list))
5628 return;
5629
5630 mutex_lock(&ioc->raid_data.inactive_list_mutex);
5631 list_for_each_entry_safe(component_info, pNext,
5632 &ioc->raid_data.inactive_list, list) {
5633 list_del(&component_info->list);
5634 kfree(component_info);
5635 }
5636 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5637 }
5638
5639 /**
5640 * mpt_inactive_raid_volumes - sets up link list of phy_disk_nums for devices belonging in an inactive volume
5641 *
5642 * @ioc : pointer to per adapter structure
5643 * @channel : volume channel
5644 * @id : volume target id
5645 **/
5646 static void
mpt_inactive_raid_volumes(MPT_ADAPTER * ioc,u8 channel,u8 id)5647 mpt_inactive_raid_volumes(MPT_ADAPTER *ioc, u8 channel, u8 id)
5648 {
5649 CONFIGPARMS cfg;
5650 ConfigPageHeader_t hdr;
5651 dma_addr_t dma_handle;
5652 pRaidVolumePage0_t buffer = NULL;
5653 int i;
5654 RaidPhysDiskPage0_t phys_disk;
5655 struct inactive_raid_component_info *component_info;
5656 int handle_inactive_volumes;
5657
5658 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5659 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5660 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_VOLUME;
5661 cfg.pageAddr = (channel << 8) + id;
5662 cfg.cfghdr.hdr = &hdr;
5663 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5664
5665 if (mpt_config(ioc, &cfg) != 0)
5666 goto out;
5667
5668 if (!hdr.PageLength)
5669 goto out;
5670
5671 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5672 &dma_handle);
5673
5674 if (!buffer)
5675 goto out;
5676
5677 cfg.physAddr = dma_handle;
5678 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5679
5680 if (mpt_config(ioc, &cfg) != 0)
5681 goto out;
5682
5683 if (!buffer->NumPhysDisks)
5684 goto out;
5685
5686 handle_inactive_volumes =
5687 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_VOLUME_INACTIVE ||
5688 (buffer->VolumeStatus.Flags & MPI_RAIDVOL0_STATUS_FLAG_ENABLED) == 0 ||
5689 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_FAILED ||
5690 buffer->VolumeStatus.State == MPI_RAIDVOL0_STATUS_STATE_MISSING) ? 1 : 0;
5691
5692 if (!handle_inactive_volumes)
5693 goto out;
5694
5695 mutex_lock(&ioc->raid_data.inactive_list_mutex);
5696 for (i = 0; i < buffer->NumPhysDisks; i++) {
5697 if(mpt_raid_phys_disk_pg0(ioc,
5698 buffer->PhysDisk[i].PhysDiskNum, &phys_disk) != 0)
5699 continue;
5700
5701 if ((component_info = kmalloc(sizeof (*component_info),
5702 GFP_KERNEL)) == NULL)
5703 continue;
5704
5705 component_info->volumeID = id;
5706 component_info->volumeBus = channel;
5707 component_info->d.PhysDiskNum = phys_disk.PhysDiskNum;
5708 component_info->d.PhysDiskBus = phys_disk.PhysDiskBus;
5709 component_info->d.PhysDiskID = phys_disk.PhysDiskID;
5710 component_info->d.PhysDiskIOC = phys_disk.PhysDiskIOC;
5711
5712 list_add_tail(&component_info->list,
5713 &ioc->raid_data.inactive_list);
5714 }
5715 mutex_unlock(&ioc->raid_data.inactive_list_mutex);
5716
5717 out:
5718 if (buffer)
5719 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5720 dma_handle);
5721 }
5722
5723 /**
5724 * mpt_raid_phys_disk_pg0 - returns phys disk page zero
5725 * @ioc: Pointer to a Adapter Structure
5726 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5727 * @phys_disk: requested payload data returned
5728 *
5729 * Return:
5730 * 0 on success
5731 * -EFAULT if read of config page header fails or data pointer not NULL
5732 * -ENOMEM if pci_alloc failed
5733 **/
5734 int
mpt_raid_phys_disk_pg0(MPT_ADAPTER * ioc,u8 phys_disk_num,RaidPhysDiskPage0_t * phys_disk)5735 mpt_raid_phys_disk_pg0(MPT_ADAPTER *ioc, u8 phys_disk_num,
5736 RaidPhysDiskPage0_t *phys_disk)
5737 {
5738 CONFIGPARMS cfg;
5739 ConfigPageHeader_t hdr;
5740 dma_addr_t dma_handle;
5741 pRaidPhysDiskPage0_t buffer = NULL;
5742 int rc;
5743
5744 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5745 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5746 memset(phys_disk, 0, sizeof(RaidPhysDiskPage0_t));
5747
5748 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE0_PAGEVERSION;
5749 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5750 cfg.cfghdr.hdr = &hdr;
5751 cfg.physAddr = -1;
5752 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5753
5754 if (mpt_config(ioc, &cfg) != 0) {
5755 rc = -EFAULT;
5756 goto out;
5757 }
5758
5759 if (!hdr.PageLength) {
5760 rc = -EFAULT;
5761 goto out;
5762 }
5763
5764 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5765 &dma_handle);
5766
5767 if (!buffer) {
5768 rc = -ENOMEM;
5769 goto out;
5770 }
5771
5772 cfg.physAddr = dma_handle;
5773 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5774 cfg.pageAddr = phys_disk_num;
5775
5776 if (mpt_config(ioc, &cfg) != 0) {
5777 rc = -EFAULT;
5778 goto out;
5779 }
5780
5781 rc = 0;
5782 memcpy(phys_disk, buffer, sizeof(*buffer));
5783 phys_disk->MaxLBA = le32_to_cpu(buffer->MaxLBA);
5784
5785 out:
5786
5787 if (buffer)
5788 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5789 dma_handle);
5790
5791 return rc;
5792 }
5793
5794 /**
5795 * mpt_raid_phys_disk_get_num_paths - returns number paths associated to this phys_num
5796 * @ioc: Pointer to a Adapter Structure
5797 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5798 *
5799 * Return:
5800 * returns number paths
5801 **/
5802 int
mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER * ioc,u8 phys_disk_num)5803 mpt_raid_phys_disk_get_num_paths(MPT_ADAPTER *ioc, u8 phys_disk_num)
5804 {
5805 CONFIGPARMS cfg;
5806 ConfigPageHeader_t hdr;
5807 dma_addr_t dma_handle;
5808 pRaidPhysDiskPage1_t buffer = NULL;
5809 int rc;
5810
5811 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5812 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5813
5814 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5815 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5816 hdr.PageNumber = 1;
5817 cfg.cfghdr.hdr = &hdr;
5818 cfg.physAddr = -1;
5819 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5820
5821 if (mpt_config(ioc, &cfg) != 0) {
5822 rc = 0;
5823 goto out;
5824 }
5825
5826 if (!hdr.PageLength) {
5827 rc = 0;
5828 goto out;
5829 }
5830
5831 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5832 &dma_handle);
5833
5834 if (!buffer) {
5835 rc = 0;
5836 goto out;
5837 }
5838
5839 cfg.physAddr = dma_handle;
5840 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5841 cfg.pageAddr = phys_disk_num;
5842
5843 if (mpt_config(ioc, &cfg) != 0) {
5844 rc = 0;
5845 goto out;
5846 }
5847
5848 rc = buffer->NumPhysDiskPaths;
5849 out:
5850
5851 if (buffer)
5852 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5853 dma_handle);
5854
5855 return rc;
5856 }
5857 EXPORT_SYMBOL(mpt_raid_phys_disk_get_num_paths);
5858
5859 /**
5860 * mpt_raid_phys_disk_pg1 - returns phys disk page 1
5861 * @ioc: Pointer to a Adapter Structure
5862 * @phys_disk_num: io unit unique phys disk num generated by the ioc
5863 * @phys_disk: requested payload data returned
5864 *
5865 * Return:
5866 * 0 on success
5867 * -EFAULT if read of config page header fails or data pointer not NULL
5868 * -ENOMEM if pci_alloc failed
5869 **/
5870 int
mpt_raid_phys_disk_pg1(MPT_ADAPTER * ioc,u8 phys_disk_num,RaidPhysDiskPage1_t * phys_disk)5871 mpt_raid_phys_disk_pg1(MPT_ADAPTER *ioc, u8 phys_disk_num,
5872 RaidPhysDiskPage1_t *phys_disk)
5873 {
5874 CONFIGPARMS cfg;
5875 ConfigPageHeader_t hdr;
5876 dma_addr_t dma_handle;
5877 pRaidPhysDiskPage1_t buffer = NULL;
5878 int rc;
5879 int i;
5880 __le64 sas_address;
5881
5882 memset(&cfg, 0 , sizeof(CONFIGPARMS));
5883 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
5884 rc = 0;
5885
5886 hdr.PageVersion = MPI_RAIDPHYSDISKPAGE1_PAGEVERSION;
5887 hdr.PageType = MPI_CONFIG_PAGETYPE_RAID_PHYSDISK;
5888 hdr.PageNumber = 1;
5889 cfg.cfghdr.hdr = &hdr;
5890 cfg.physAddr = -1;
5891 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5892
5893 if (mpt_config(ioc, &cfg) != 0) {
5894 rc = -EFAULT;
5895 goto out;
5896 }
5897
5898 if (!hdr.PageLength) {
5899 rc = -EFAULT;
5900 goto out;
5901 }
5902
5903 buffer = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4,
5904 &dma_handle);
5905
5906 if (!buffer) {
5907 rc = -ENOMEM;
5908 goto out;
5909 }
5910
5911 cfg.physAddr = dma_handle;
5912 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
5913 cfg.pageAddr = phys_disk_num;
5914
5915 if (mpt_config(ioc, &cfg) != 0) {
5916 rc = -EFAULT;
5917 goto out;
5918 }
5919
5920 phys_disk->NumPhysDiskPaths = buffer->NumPhysDiskPaths;
5921 phys_disk->PhysDiskNum = phys_disk_num;
5922 for (i = 0; i < phys_disk->NumPhysDiskPaths; i++) {
5923 phys_disk->Path[i].PhysDiskID = buffer->Path[i].PhysDiskID;
5924 phys_disk->Path[i].PhysDiskBus = buffer->Path[i].PhysDiskBus;
5925 phys_disk->Path[i].OwnerIdentifier =
5926 buffer->Path[i].OwnerIdentifier;
5927 phys_disk->Path[i].Flags = le16_to_cpu(buffer->Path[i].Flags);
5928 memcpy(&sas_address, &buffer->Path[i].WWID, sizeof(__le64));
5929 sas_address = le64_to_cpu(sas_address);
5930 memcpy(&phys_disk->Path[i].WWID, &sas_address, sizeof(__le64));
5931 memcpy(&sas_address,
5932 &buffer->Path[i].OwnerWWID, sizeof(__le64));
5933 sas_address = le64_to_cpu(sas_address);
5934 memcpy(&phys_disk->Path[i].OwnerWWID,
5935 &sas_address, sizeof(__le64));
5936 }
5937
5938 out:
5939
5940 if (buffer)
5941 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, buffer,
5942 dma_handle);
5943
5944 return rc;
5945 }
5946 EXPORT_SYMBOL(mpt_raid_phys_disk_pg1);
5947
5948
5949 /**
5950 * mpt_findImVolumes - Identify IDs of hidden disks and RAID Volumes
5951 * @ioc: Pointer to a Adapter Strucutre
5952 *
5953 * Return:
5954 * 0 on success
5955 * -EFAULT if read of config page header fails or data pointer not NULL
5956 * -ENOMEM if pci_alloc failed
5957 **/
5958 int
mpt_findImVolumes(MPT_ADAPTER * ioc)5959 mpt_findImVolumes(MPT_ADAPTER *ioc)
5960 {
5961 IOCPage2_t *pIoc2;
5962 u8 *mem;
5963 dma_addr_t ioc2_dma;
5964 CONFIGPARMS cfg;
5965 ConfigPageHeader_t header;
5966 int rc = 0;
5967 int iocpage2sz;
5968 int i;
5969
5970 if (!ioc->ir_firmware)
5971 return 0;
5972
5973 /* Free the old page
5974 */
5975 kfree(ioc->raid_data.pIocPg2);
5976 ioc->raid_data.pIocPg2 = NULL;
5977 mpt_inactive_raid_list_free(ioc);
5978
5979 /* Read IOCP2 header then the page.
5980 */
5981 header.PageVersion = 0;
5982 header.PageLength = 0;
5983 header.PageNumber = 2;
5984 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
5985 cfg.cfghdr.hdr = &header;
5986 cfg.physAddr = -1;
5987 cfg.pageAddr = 0;
5988 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
5989 cfg.dir = 0;
5990 cfg.timeout = 0;
5991 if (mpt_config(ioc, &cfg) != 0)
5992 return -EFAULT;
5993
5994 if (header.PageLength == 0)
5995 return -EFAULT;
5996
5997 iocpage2sz = header.PageLength * 4;
5998 pIoc2 = pci_alloc_consistent(ioc->pcidev, iocpage2sz, &ioc2_dma);
5999 if (!pIoc2)
6000 return -ENOMEM;
6001
6002 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6003 cfg.physAddr = ioc2_dma;
6004 if (mpt_config(ioc, &cfg) != 0)
6005 goto out;
6006
6007 mem = kmalloc(iocpage2sz, GFP_KERNEL);
6008 if (!mem) {
6009 rc = -ENOMEM;
6010 goto out;
6011 }
6012
6013 memcpy(mem, (u8 *)pIoc2, iocpage2sz);
6014 ioc->raid_data.pIocPg2 = (IOCPage2_t *) mem;
6015
6016 mpt_read_ioc_pg_3(ioc);
6017
6018 for (i = 0; i < pIoc2->NumActiveVolumes ; i++)
6019 mpt_inactive_raid_volumes(ioc,
6020 pIoc2->RaidVolume[i].VolumeBus,
6021 pIoc2->RaidVolume[i].VolumeID);
6022
6023 out:
6024 pci_free_consistent(ioc->pcidev, iocpage2sz, pIoc2, ioc2_dma);
6025
6026 return rc;
6027 }
6028
6029 static int
mpt_read_ioc_pg_3(MPT_ADAPTER * ioc)6030 mpt_read_ioc_pg_3(MPT_ADAPTER *ioc)
6031 {
6032 IOCPage3_t *pIoc3;
6033 u8 *mem;
6034 CONFIGPARMS cfg;
6035 ConfigPageHeader_t header;
6036 dma_addr_t ioc3_dma;
6037 int iocpage3sz = 0;
6038
6039 /* Free the old page
6040 */
6041 kfree(ioc->raid_data.pIocPg3);
6042 ioc->raid_data.pIocPg3 = NULL;
6043
6044 /* There is at least one physical disk.
6045 * Read and save IOC Page 3
6046 */
6047 header.PageVersion = 0;
6048 header.PageLength = 0;
6049 header.PageNumber = 3;
6050 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6051 cfg.cfghdr.hdr = &header;
6052 cfg.physAddr = -1;
6053 cfg.pageAddr = 0;
6054 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6055 cfg.dir = 0;
6056 cfg.timeout = 0;
6057 if (mpt_config(ioc, &cfg) != 0)
6058 return 0;
6059
6060 if (header.PageLength == 0)
6061 return 0;
6062
6063 /* Read Header good, alloc memory
6064 */
6065 iocpage3sz = header.PageLength * 4;
6066 pIoc3 = pci_alloc_consistent(ioc->pcidev, iocpage3sz, &ioc3_dma);
6067 if (!pIoc3)
6068 return 0;
6069
6070 /* Read the Page and save the data
6071 * into malloc'd memory.
6072 */
6073 cfg.physAddr = ioc3_dma;
6074 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6075 if (mpt_config(ioc, &cfg) == 0) {
6076 mem = kmalloc(iocpage3sz, GFP_KERNEL);
6077 if (mem) {
6078 memcpy(mem, (u8 *)pIoc3, iocpage3sz);
6079 ioc->raid_data.pIocPg3 = (IOCPage3_t *) mem;
6080 }
6081 }
6082
6083 pci_free_consistent(ioc->pcidev, iocpage3sz, pIoc3, ioc3_dma);
6084
6085 return 0;
6086 }
6087
6088 static void
mpt_read_ioc_pg_4(MPT_ADAPTER * ioc)6089 mpt_read_ioc_pg_4(MPT_ADAPTER *ioc)
6090 {
6091 IOCPage4_t *pIoc4;
6092 CONFIGPARMS cfg;
6093 ConfigPageHeader_t header;
6094 dma_addr_t ioc4_dma;
6095 int iocpage4sz;
6096
6097 /* Read and save IOC Page 4
6098 */
6099 header.PageVersion = 0;
6100 header.PageLength = 0;
6101 header.PageNumber = 4;
6102 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6103 cfg.cfghdr.hdr = &header;
6104 cfg.physAddr = -1;
6105 cfg.pageAddr = 0;
6106 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6107 cfg.dir = 0;
6108 cfg.timeout = 0;
6109 if (mpt_config(ioc, &cfg) != 0)
6110 return;
6111
6112 if (header.PageLength == 0)
6113 return;
6114
6115 if ( (pIoc4 = ioc->spi_data.pIocPg4) == NULL ) {
6116 iocpage4sz = (header.PageLength + 4) * 4; /* Allow 4 additional SEP's */
6117 pIoc4 = pci_alloc_consistent(ioc->pcidev, iocpage4sz, &ioc4_dma);
6118 if (!pIoc4)
6119 return;
6120 ioc->alloc_total += iocpage4sz;
6121 } else {
6122 ioc4_dma = ioc->spi_data.IocPg4_dma;
6123 iocpage4sz = ioc->spi_data.IocPg4Sz;
6124 }
6125
6126 /* Read the Page into dma memory.
6127 */
6128 cfg.physAddr = ioc4_dma;
6129 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6130 if (mpt_config(ioc, &cfg) == 0) {
6131 ioc->spi_data.pIocPg4 = (IOCPage4_t *) pIoc4;
6132 ioc->spi_data.IocPg4_dma = ioc4_dma;
6133 ioc->spi_data.IocPg4Sz = iocpage4sz;
6134 } else {
6135 pci_free_consistent(ioc->pcidev, iocpage4sz, pIoc4, ioc4_dma);
6136 ioc->spi_data.pIocPg4 = NULL;
6137 ioc->alloc_total -= iocpage4sz;
6138 }
6139 }
6140
6141 static void
mpt_read_ioc_pg_1(MPT_ADAPTER * ioc)6142 mpt_read_ioc_pg_1(MPT_ADAPTER *ioc)
6143 {
6144 IOCPage1_t *pIoc1;
6145 CONFIGPARMS cfg;
6146 ConfigPageHeader_t header;
6147 dma_addr_t ioc1_dma;
6148 int iocpage1sz = 0;
6149 u32 tmp;
6150
6151 /* Check the Coalescing Timeout in IOC Page 1
6152 */
6153 header.PageVersion = 0;
6154 header.PageLength = 0;
6155 header.PageNumber = 1;
6156 header.PageType = MPI_CONFIG_PAGETYPE_IOC;
6157 cfg.cfghdr.hdr = &header;
6158 cfg.physAddr = -1;
6159 cfg.pageAddr = 0;
6160 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6161 cfg.dir = 0;
6162 cfg.timeout = 0;
6163 if (mpt_config(ioc, &cfg) != 0)
6164 return;
6165
6166 if (header.PageLength == 0)
6167 return;
6168
6169 /* Read Header good, alloc memory
6170 */
6171 iocpage1sz = header.PageLength * 4;
6172 pIoc1 = pci_alloc_consistent(ioc->pcidev, iocpage1sz, &ioc1_dma);
6173 if (!pIoc1)
6174 return;
6175
6176 /* Read the Page and check coalescing timeout
6177 */
6178 cfg.physAddr = ioc1_dma;
6179 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6180 if (mpt_config(ioc, &cfg) == 0) {
6181
6182 tmp = le32_to_cpu(pIoc1->Flags) & MPI_IOCPAGE1_REPLY_COALESCING;
6183 if (tmp == MPI_IOCPAGE1_REPLY_COALESCING) {
6184 tmp = le32_to_cpu(pIoc1->CoalescingTimeout);
6185
6186 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Coalescing Enabled Timeout = %d\n",
6187 ioc->name, tmp));
6188
6189 if (tmp > MPT_COALESCING_TIMEOUT) {
6190 pIoc1->CoalescingTimeout = cpu_to_le32(MPT_COALESCING_TIMEOUT);
6191
6192 /* Write NVRAM and current
6193 */
6194 cfg.dir = 1;
6195 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
6196 if (mpt_config(ioc, &cfg) == 0) {
6197 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Reset Current Coalescing Timeout to = %d\n",
6198 ioc->name, MPT_COALESCING_TIMEOUT));
6199
6200 cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_NVRAM;
6201 if (mpt_config(ioc, &cfg) == 0) {
6202 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6203 "Reset NVRAM Coalescing Timeout to = %d\n",
6204 ioc->name, MPT_COALESCING_TIMEOUT));
6205 } else {
6206 dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6207 "Reset NVRAM Coalescing Timeout Failed\n",
6208 ioc->name));
6209 }
6210
6211 } else {
6212 dprintk(ioc, printk(MYIOC_s_WARN_FMT
6213 "Reset of Current Coalescing Timeout Failed!\n",
6214 ioc->name));
6215 }
6216 }
6217
6218 } else {
6219 dprintk(ioc, printk(MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name));
6220 }
6221 }
6222
6223 pci_free_consistent(ioc->pcidev, iocpage1sz, pIoc1, ioc1_dma);
6224
6225 return;
6226 }
6227
6228 static void
mpt_get_manufacturing_pg_0(MPT_ADAPTER * ioc)6229 mpt_get_manufacturing_pg_0(MPT_ADAPTER *ioc)
6230 {
6231 CONFIGPARMS cfg;
6232 ConfigPageHeader_t hdr;
6233 dma_addr_t buf_dma;
6234 ManufacturingPage0_t *pbuf = NULL;
6235
6236 memset(&cfg, 0 , sizeof(CONFIGPARMS));
6237 memset(&hdr, 0 , sizeof(ConfigPageHeader_t));
6238
6239 hdr.PageType = MPI_CONFIG_PAGETYPE_MANUFACTURING;
6240 cfg.cfghdr.hdr = &hdr;
6241 cfg.physAddr = -1;
6242 cfg.action = MPI_CONFIG_ACTION_PAGE_HEADER;
6243 cfg.timeout = 10;
6244
6245 if (mpt_config(ioc, &cfg) != 0)
6246 goto out;
6247
6248 if (!cfg.cfghdr.hdr->PageLength)
6249 goto out;
6250
6251 cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
6252 pbuf = pci_alloc_consistent(ioc->pcidev, hdr.PageLength * 4, &buf_dma);
6253 if (!pbuf)
6254 goto out;
6255
6256 cfg.physAddr = buf_dma;
6257
6258 if (mpt_config(ioc, &cfg) != 0)
6259 goto out;
6260
6261 memcpy(ioc->board_name, pbuf->BoardName, sizeof(ioc->board_name));
6262 memcpy(ioc->board_assembly, pbuf->BoardAssembly, sizeof(ioc->board_assembly));
6263 memcpy(ioc->board_tracer, pbuf->BoardTracerNumber, sizeof(ioc->board_tracer));
6264
6265 out:
6266
6267 if (pbuf)
6268 pci_free_consistent(ioc->pcidev, hdr.PageLength * 4, pbuf, buf_dma);
6269 }
6270
6271 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6272 /**
6273 * SendEventNotification - Send EventNotification (on or off) request to adapter
6274 * @ioc: Pointer to MPT_ADAPTER structure
6275 * @EvSwitch: Event switch flags
6276 * @sleepFlag: Specifies whether the process can sleep
6277 */
6278 static int
SendEventNotification(MPT_ADAPTER * ioc,u8 EvSwitch,int sleepFlag)6279 SendEventNotification(MPT_ADAPTER *ioc, u8 EvSwitch, int sleepFlag)
6280 {
6281 EventNotification_t evn;
6282 MPIDefaultReply_t reply_buf;
6283
6284 memset(&evn, 0, sizeof(EventNotification_t));
6285 memset(&reply_buf, 0, sizeof(MPIDefaultReply_t));
6286
6287 evn.Function = MPI_FUNCTION_EVENT_NOTIFICATION;
6288 evn.Switch = EvSwitch;
6289 evn.MsgContext = cpu_to_le32(mpt_base_index << 16);
6290
6291 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6292 "Sending EventNotification (%d) request %p\n",
6293 ioc->name, EvSwitch, &evn));
6294
6295 return mpt_handshake_req_reply_wait(ioc, sizeof(EventNotification_t),
6296 (u32 *)&evn, sizeof(MPIDefaultReply_t), (u16 *)&reply_buf, 30,
6297 sleepFlag);
6298 }
6299
6300 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6301 /**
6302 * SendEventAck - Send EventAck request to MPT adapter.
6303 * @ioc: Pointer to MPT_ADAPTER structure
6304 * @evnp: Pointer to original EventNotification request
6305 */
6306 static int
SendEventAck(MPT_ADAPTER * ioc,EventNotificationReply_t * evnp)6307 SendEventAck(MPT_ADAPTER *ioc, EventNotificationReply_t *evnp)
6308 {
6309 EventAck_t *pAck;
6310
6311 if ((pAck = (EventAck_t *) mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6312 dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
6313 ioc->name, __func__));
6314 return -1;
6315 }
6316
6317 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventAck\n", ioc->name));
6318
6319 pAck->Function = MPI_FUNCTION_EVENT_ACK;
6320 pAck->ChainOffset = 0;
6321 pAck->Reserved[0] = pAck->Reserved[1] = 0;
6322 pAck->MsgFlags = 0;
6323 pAck->Reserved1[0] = pAck->Reserved1[1] = pAck->Reserved1[2] = 0;
6324 pAck->Event = evnp->Event;
6325 pAck->EventContext = evnp->EventContext;
6326
6327 mpt_put_msg_frame(mpt_base_index, ioc, (MPT_FRAME_HDR *)pAck);
6328
6329 return 0;
6330 }
6331
6332 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6333 /**
6334 * mpt_config - Generic function to issue config message
6335 * @ioc: Pointer to an adapter structure
6336 * @pCfg: Pointer to a configuration structure. Struct contains
6337 * action, page address, direction, physical address
6338 * and pointer to a configuration page header
6339 * Page header is updated.
6340 *
6341 * Returns 0 for success
6342 * -EPERM if not allowed due to ISR context
6343 * -EAGAIN if no msg frames currently available
6344 * -EFAULT for non-successful reply or no reply (timeout)
6345 */
6346 int
mpt_config(MPT_ADAPTER * ioc,CONFIGPARMS * pCfg)6347 mpt_config(MPT_ADAPTER *ioc, CONFIGPARMS *pCfg)
6348 {
6349 Config_t *pReq;
6350 ConfigReply_t *pReply;
6351 ConfigExtendedPageHeader_t *pExtHdr = NULL;
6352 MPT_FRAME_HDR *mf;
6353 int ii;
6354 int flagsLength;
6355 long timeout;
6356 int ret;
6357 u8 page_type = 0, extend_page;
6358 unsigned long timeleft;
6359 unsigned long flags;
6360 int in_isr;
6361 u8 issue_hard_reset = 0;
6362 u8 retry_count = 0;
6363
6364 /* Prevent calling wait_event() (below), if caller happens
6365 * to be in ISR context, because that is fatal!
6366 */
6367 in_isr = in_interrupt();
6368 if (in_isr) {
6369 dcprintk(ioc, printk(MYIOC_s_WARN_FMT "Config request not allowed in ISR context!\n",
6370 ioc->name));
6371 return -EPERM;
6372 }
6373
6374 /* don't send a config page during diag reset */
6375 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6376 if (ioc->ioc_reset_in_progress) {
6377 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6378 "%s: busy with host reset\n", ioc->name, __func__));
6379 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6380 return -EBUSY;
6381 }
6382 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6383
6384 /* don't send if no chance of success */
6385 if (!ioc->active ||
6386 mpt_GetIocState(ioc, 1) != MPI_IOC_STATE_OPERATIONAL) {
6387 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6388 "%s: ioc not operational, %d, %xh\n",
6389 ioc->name, __func__, ioc->active,
6390 mpt_GetIocState(ioc, 0)));
6391 return -EFAULT;
6392 }
6393
6394 retry_config:
6395 mutex_lock(&ioc->mptbase_cmds.mutex);
6396 /* init the internal cmd struct */
6397 memset(ioc->mptbase_cmds.reply, 0 , MPT_DEFAULT_FRAME_SIZE);
6398 INITIALIZE_MGMT_STATUS(ioc->mptbase_cmds.status)
6399
6400 /* Get and Populate a free Frame
6401 */
6402 if ((mf = mpt_get_msg_frame(mpt_base_index, ioc)) == NULL) {
6403 dcprintk(ioc, printk(MYIOC_s_WARN_FMT
6404 "mpt_config: no msg frames!\n", ioc->name));
6405 ret = -EAGAIN;
6406 goto out;
6407 }
6408
6409 pReq = (Config_t *)mf;
6410 pReq->Action = pCfg->action;
6411 pReq->Reserved = 0;
6412 pReq->ChainOffset = 0;
6413 pReq->Function = MPI_FUNCTION_CONFIG;
6414
6415 /* Assume page type is not extended and clear "reserved" fields. */
6416 pReq->ExtPageLength = 0;
6417 pReq->ExtPageType = 0;
6418 pReq->MsgFlags = 0;
6419
6420 for (ii=0; ii < 8; ii++)
6421 pReq->Reserved2[ii] = 0;
6422
6423 pReq->Header.PageVersion = pCfg->cfghdr.hdr->PageVersion;
6424 pReq->Header.PageLength = pCfg->cfghdr.hdr->PageLength;
6425 pReq->Header.PageNumber = pCfg->cfghdr.hdr->PageNumber;
6426 pReq->Header.PageType = (pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK);
6427
6428 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) == MPI_CONFIG_PAGETYPE_EXTENDED) {
6429 pExtHdr = (ConfigExtendedPageHeader_t *)pCfg->cfghdr.ehdr;
6430 pReq->ExtPageLength = cpu_to_le16(pExtHdr->ExtPageLength);
6431 pReq->ExtPageType = pExtHdr->ExtPageType;
6432 pReq->Header.PageType = MPI_CONFIG_PAGETYPE_EXTENDED;
6433
6434 /* Page Length must be treated as a reserved field for the
6435 * extended header.
6436 */
6437 pReq->Header.PageLength = 0;
6438 }
6439
6440 pReq->PageAddress = cpu_to_le32(pCfg->pageAddr);
6441
6442 /* Add a SGE to the config request.
6443 */
6444 if (pCfg->dir)
6445 flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE;
6446 else
6447 flagsLength = MPT_SGE_FLAGS_SSIMPLE_READ;
6448
6449 if ((pCfg->cfghdr.hdr->PageType & MPI_CONFIG_PAGETYPE_MASK) ==
6450 MPI_CONFIG_PAGETYPE_EXTENDED) {
6451 flagsLength |= pExtHdr->ExtPageLength * 4;
6452 page_type = pReq->ExtPageType;
6453 extend_page = 1;
6454 } else {
6455 flagsLength |= pCfg->cfghdr.hdr->PageLength * 4;
6456 page_type = pReq->Header.PageType;
6457 extend_page = 0;
6458 }
6459
6460 dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6461 "Sending Config request type 0x%x, page 0x%x and action %d\n",
6462 ioc->name, page_type, pReq->Header.PageNumber, pReq->Action));
6463
6464 ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, pCfg->physAddr);
6465 timeout = (pCfg->timeout < 15) ? HZ*15 : HZ*pCfg->timeout;
6466 mpt_put_msg_frame(mpt_base_index, ioc, mf);
6467 timeleft = wait_for_completion_timeout(&ioc->mptbase_cmds.done,
6468 timeout);
6469 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
6470 ret = -ETIME;
6471 dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6472 "Failed Sending Config request type 0x%x, page 0x%x,"
6473 " action %d, status %xh, time left %ld\n\n",
6474 ioc->name, page_type, pReq->Header.PageNumber,
6475 pReq->Action, ioc->mptbase_cmds.status, timeleft));
6476 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
6477 goto out;
6478 if (!timeleft) {
6479 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6480 if (ioc->ioc_reset_in_progress) {
6481 spin_unlock_irqrestore(&ioc->taskmgmt_lock,
6482 flags);
6483 printk(MYIOC_s_INFO_FMT "%s: host reset in"
6484 " progress mpt_config timed out.!!\n",
6485 __func__, ioc->name);
6486 return -EFAULT;
6487 }
6488 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6489 issue_hard_reset = 1;
6490 }
6491 goto out;
6492 }
6493
6494 if (!(ioc->mptbase_cmds.status & MPT_MGMT_STATUS_RF_VALID)) {
6495 ret = -1;
6496 goto out;
6497 }
6498 pReply = (ConfigReply_t *)ioc->mptbase_cmds.reply;
6499 ret = le16_to_cpu(pReply->IOCStatus) & MPI_IOCSTATUS_MASK;
6500 if (ret == MPI_IOCSTATUS_SUCCESS) {
6501 if (extend_page) {
6502 pCfg->cfghdr.ehdr->ExtPageLength =
6503 le16_to_cpu(pReply->ExtPageLength);
6504 pCfg->cfghdr.ehdr->ExtPageType =
6505 pReply->ExtPageType;
6506 }
6507 pCfg->cfghdr.hdr->PageVersion = pReply->Header.PageVersion;
6508 pCfg->cfghdr.hdr->PageLength = pReply->Header.PageLength;
6509 pCfg->cfghdr.hdr->PageNumber = pReply->Header.PageNumber;
6510 pCfg->cfghdr.hdr->PageType = pReply->Header.PageType;
6511
6512 }
6513
6514 if (retry_count)
6515 printk(MYIOC_s_INFO_FMT "Retry completed "
6516 "ret=0x%x timeleft=%ld\n",
6517 ioc->name, ret, timeleft);
6518
6519 dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n",
6520 ret, le32_to_cpu(pReply->IOCLogInfo)));
6521
6522 out:
6523
6524 CLEAR_MGMT_STATUS(ioc->mptbase_cmds.status)
6525 mutex_unlock(&ioc->mptbase_cmds.mutex);
6526 if (issue_hard_reset) {
6527 issue_hard_reset = 0;
6528 printk(MYIOC_s_WARN_FMT
6529 "Issuing Reset from %s!!, doorbell=0x%08x\n",
6530 ioc->name, __func__, mpt_GetIocState(ioc, 0));
6531 if (retry_count == 0) {
6532 if (mpt_Soft_Hard_ResetHandler(ioc, CAN_SLEEP) != 0)
6533 retry_count++;
6534 } else
6535 mpt_HardResetHandler(ioc, CAN_SLEEP);
6536
6537 mpt_free_msg_frame(ioc, mf);
6538 /* attempt one retry for a timed out command */
6539 if (retry_count < 2) {
6540 printk(MYIOC_s_INFO_FMT
6541 "Attempting Retry Config request"
6542 " type 0x%x, page 0x%x,"
6543 " action %d\n", ioc->name, page_type,
6544 pCfg->cfghdr.hdr->PageNumber, pCfg->action);
6545 retry_count++;
6546 goto retry_config;
6547 }
6548 }
6549 return ret;
6550
6551 }
6552
6553 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6554 /**
6555 * mpt_ioc_reset - Base cleanup for hard reset
6556 * @ioc: Pointer to the adapter structure
6557 * @reset_phase: Indicates pre- or post-reset functionality
6558 *
6559 * Remark: Frees resources with internally generated commands.
6560 */
6561 static int
mpt_ioc_reset(MPT_ADAPTER * ioc,int reset_phase)6562 mpt_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
6563 {
6564 switch (reset_phase) {
6565 case MPT_IOC_SETUP_RESET:
6566 ioc->taskmgmt_quiesce_io = 1;
6567 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6568 "%s: MPT_IOC_SETUP_RESET\n", ioc->name, __func__));
6569 break;
6570 case MPT_IOC_PRE_RESET:
6571 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6572 "%s: MPT_IOC_PRE_RESET\n", ioc->name, __func__));
6573 break;
6574 case MPT_IOC_POST_RESET:
6575 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
6576 "%s: MPT_IOC_POST_RESET\n", ioc->name, __func__));
6577 /* wake up mptbase_cmds */
6578 if (ioc->mptbase_cmds.status & MPT_MGMT_STATUS_PENDING) {
6579 ioc->mptbase_cmds.status |=
6580 MPT_MGMT_STATUS_DID_IOCRESET;
6581 complete(&ioc->mptbase_cmds.done);
6582 }
6583 /* wake up taskmgmt_cmds */
6584 if (ioc->taskmgmt_cmds.status & MPT_MGMT_STATUS_PENDING) {
6585 ioc->taskmgmt_cmds.status |=
6586 MPT_MGMT_STATUS_DID_IOCRESET;
6587 complete(&ioc->taskmgmt_cmds.done);
6588 }
6589 break;
6590 default:
6591 break;
6592 }
6593
6594 return 1; /* currently means nothing really */
6595 }
6596
6597
6598 #ifdef CONFIG_PROC_FS /* { */
6599 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6600 /*
6601 * procfs (%MPT_PROCFS_MPTBASEDIR/...) support stuff...
6602 */
6603 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6604 /**
6605 * procmpt_create - Create %MPT_PROCFS_MPTBASEDIR entries.
6606 *
6607 * Returns 0 for success, non-zero for failure.
6608 */
6609 static int
procmpt_create(void)6610 procmpt_create(void)
6611 {
6612 mpt_proc_root_dir = proc_mkdir(MPT_PROCFS_MPTBASEDIR, NULL);
6613 if (mpt_proc_root_dir == NULL)
6614 return -ENOTDIR;
6615
6616 proc_create("summary", S_IRUGO, mpt_proc_root_dir, &mpt_summary_proc_fops);
6617 proc_create("version", S_IRUGO, mpt_proc_root_dir, &mpt_version_proc_fops);
6618 return 0;
6619 }
6620
6621 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6622 /**
6623 * procmpt_destroy - Tear down %MPT_PROCFS_MPTBASEDIR entries.
6624 *
6625 * Returns 0 for success, non-zero for failure.
6626 */
6627 static void
procmpt_destroy(void)6628 procmpt_destroy(void)
6629 {
6630 remove_proc_entry("version", mpt_proc_root_dir);
6631 remove_proc_entry("summary", mpt_proc_root_dir);
6632 remove_proc_entry(MPT_PROCFS_MPTBASEDIR, NULL);
6633 }
6634
6635 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6636 /*
6637 * Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary.
6638 */
6639 static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan);
6640
mpt_summary_proc_show(struct seq_file * m,void * v)6641 static int mpt_summary_proc_show(struct seq_file *m, void *v)
6642 {
6643 MPT_ADAPTER *ioc = m->private;
6644
6645 if (ioc) {
6646 seq_mpt_print_ioc_summary(ioc, m, 1);
6647 } else {
6648 list_for_each_entry(ioc, &ioc_list, list) {
6649 seq_mpt_print_ioc_summary(ioc, m, 1);
6650 }
6651 }
6652
6653 return 0;
6654 }
6655
mpt_summary_proc_open(struct inode * inode,struct file * file)6656 static int mpt_summary_proc_open(struct inode *inode, struct file *file)
6657 {
6658 return single_open(file, mpt_summary_proc_show, PDE(inode)->data);
6659 }
6660
6661 static const struct file_operations mpt_summary_proc_fops = {
6662 .owner = THIS_MODULE,
6663 .open = mpt_summary_proc_open,
6664 .read = seq_read,
6665 .llseek = seq_lseek,
6666 .release = single_release,
6667 };
6668
mpt_version_proc_show(struct seq_file * m,void * v)6669 static int mpt_version_proc_show(struct seq_file *m, void *v)
6670 {
6671 u8 cb_idx;
6672 int scsi, fc, sas, lan, ctl, targ, dmp;
6673 char *drvname;
6674
6675 seq_printf(m, "%s-%s\n", "mptlinux", MPT_LINUX_VERSION_COMMON);
6676 seq_printf(m, " Fusion MPT base driver\n");
6677
6678 scsi = fc = sas = lan = ctl = targ = dmp = 0;
6679 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
6680 drvname = NULL;
6681 if (MptCallbacks[cb_idx]) {
6682 switch (MptDriverClass[cb_idx]) {
6683 case MPTSPI_DRIVER:
6684 if (!scsi++) drvname = "SPI host";
6685 break;
6686 case MPTFC_DRIVER:
6687 if (!fc++) drvname = "FC host";
6688 break;
6689 case MPTSAS_DRIVER:
6690 if (!sas++) drvname = "SAS host";
6691 break;
6692 case MPTLAN_DRIVER:
6693 if (!lan++) drvname = "LAN";
6694 break;
6695 case MPTSTM_DRIVER:
6696 if (!targ++) drvname = "SCSI target";
6697 break;
6698 case MPTCTL_DRIVER:
6699 if (!ctl++) drvname = "ioctl";
6700 break;
6701 }
6702
6703 if (drvname)
6704 seq_printf(m, " Fusion MPT %s driver\n", drvname);
6705 }
6706 }
6707
6708 return 0;
6709 }
6710
mpt_version_proc_open(struct inode * inode,struct file * file)6711 static int mpt_version_proc_open(struct inode *inode, struct file *file)
6712 {
6713 return single_open(file, mpt_version_proc_show, NULL);
6714 }
6715
6716 static const struct file_operations mpt_version_proc_fops = {
6717 .owner = THIS_MODULE,
6718 .open = mpt_version_proc_open,
6719 .read = seq_read,
6720 .llseek = seq_lseek,
6721 .release = single_release,
6722 };
6723
mpt_iocinfo_proc_show(struct seq_file * m,void * v)6724 static int mpt_iocinfo_proc_show(struct seq_file *m, void *v)
6725 {
6726 MPT_ADAPTER *ioc = m->private;
6727 char expVer[32];
6728 int sz;
6729 int p;
6730
6731 mpt_get_fw_exp_ver(expVer, ioc);
6732
6733 seq_printf(m, "%s:", ioc->name);
6734 if (ioc->facts.Flags & MPI_IOCFACTS_FLAGS_FW_DOWNLOAD_BOOT)
6735 seq_printf(m, " (f/w download boot flag set)");
6736 // if (ioc->facts.IOCExceptions & MPI_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL)
6737 // seq_printf(m, " CONFIG_CHECKSUM_FAIL!");
6738
6739 seq_printf(m, "\n ProductID = 0x%04x (%s)\n",
6740 ioc->facts.ProductID,
6741 ioc->prod_name);
6742 seq_printf(m, " FWVersion = 0x%08x%s", ioc->facts.FWVersion.Word, expVer);
6743 if (ioc->facts.FWImageSize)
6744 seq_printf(m, " (fw_size=%d)", ioc->facts.FWImageSize);
6745 seq_printf(m, "\n MsgVersion = 0x%04x\n", ioc->facts.MsgVersion);
6746 seq_printf(m, " FirstWhoInit = 0x%02x\n", ioc->FirstWhoInit);
6747 seq_printf(m, " EventState = 0x%02x\n", ioc->facts.EventState);
6748
6749 seq_printf(m, " CurrentHostMfaHighAddr = 0x%08x\n",
6750 ioc->facts.CurrentHostMfaHighAddr);
6751 seq_printf(m, " CurrentSenseBufferHighAddr = 0x%08x\n",
6752 ioc->facts.CurrentSenseBufferHighAddr);
6753
6754 seq_printf(m, " MaxChainDepth = 0x%02x frames\n", ioc->facts.MaxChainDepth);
6755 seq_printf(m, " MinBlockSize = 0x%02x bytes\n", 4*ioc->facts.BlockSize);
6756
6757 seq_printf(m, " RequestFrames @ 0x%p (Dma @ 0x%p)\n",
6758 (void *)ioc->req_frames, (void *)(ulong)ioc->req_frames_dma);
6759 /*
6760 * Rounding UP to nearest 4-kB boundary here...
6761 */
6762 sz = (ioc->req_sz * ioc->req_depth) + 128;
6763 sz = ((sz + 0x1000UL - 1UL) / 0x1000) * 0x1000;
6764 seq_printf(m, " {CurReqSz=%d} x {CurReqDepth=%d} = %d bytes ^= 0x%x\n",
6765 ioc->req_sz, ioc->req_depth, ioc->req_sz*ioc->req_depth, sz);
6766 seq_printf(m, " {MaxReqSz=%d} {MaxReqDepth=%d}\n",
6767 4*ioc->facts.RequestFrameSize,
6768 ioc->facts.GlobalCredits);
6769
6770 seq_printf(m, " Frames @ 0x%p (Dma @ 0x%p)\n",
6771 (void *)ioc->alloc, (void *)(ulong)ioc->alloc_dma);
6772 sz = (ioc->reply_sz * ioc->reply_depth) + 128;
6773 seq_printf(m, " {CurRepSz=%d} x {CurRepDepth=%d} = %d bytes ^= 0x%x\n",
6774 ioc->reply_sz, ioc->reply_depth, ioc->reply_sz*ioc->reply_depth, sz);
6775 seq_printf(m, " {MaxRepSz=%d} {MaxRepDepth=%d}\n",
6776 ioc->facts.CurReplyFrameSize,
6777 ioc->facts.ReplyQueueDepth);
6778
6779 seq_printf(m, " MaxDevices = %d\n",
6780 (ioc->facts.MaxDevices==0) ? 255 : ioc->facts.MaxDevices);
6781 seq_printf(m, " MaxBuses = %d\n", ioc->facts.MaxBuses);
6782
6783 /* per-port info */
6784 for (p=0; p < ioc->facts.NumberOfPorts; p++) {
6785 seq_printf(m, " PortNumber = %d (of %d)\n",
6786 p+1,
6787 ioc->facts.NumberOfPorts);
6788 if (ioc->bus_type == FC) {
6789 if (ioc->pfacts[p].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN) {
6790 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6791 seq_printf(m, " LanAddr = %02X:%02X:%02X:%02X:%02X:%02X\n",
6792 a[5], a[4], a[3], a[2], a[1], a[0]);
6793 }
6794 seq_printf(m, " WWN = %08X%08X:%08X%08X\n",
6795 ioc->fc_port_page0[p].WWNN.High,
6796 ioc->fc_port_page0[p].WWNN.Low,
6797 ioc->fc_port_page0[p].WWPN.High,
6798 ioc->fc_port_page0[p].WWPN.Low);
6799 }
6800 }
6801
6802 return 0;
6803 }
6804
mpt_iocinfo_proc_open(struct inode * inode,struct file * file)6805 static int mpt_iocinfo_proc_open(struct inode *inode, struct file *file)
6806 {
6807 return single_open(file, mpt_iocinfo_proc_show, PDE(inode)->data);
6808 }
6809
6810 static const struct file_operations mpt_iocinfo_proc_fops = {
6811 .owner = THIS_MODULE,
6812 .open = mpt_iocinfo_proc_open,
6813 .read = seq_read,
6814 .llseek = seq_lseek,
6815 .release = single_release,
6816 };
6817 #endif /* CONFIG_PROC_FS } */
6818
6819 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6820 static void
mpt_get_fw_exp_ver(char * buf,MPT_ADAPTER * ioc)6821 mpt_get_fw_exp_ver(char *buf, MPT_ADAPTER *ioc)
6822 {
6823 buf[0] ='\0';
6824 if ((ioc->facts.FWVersion.Word >> 24) == 0x0E) {
6825 sprintf(buf, " (Exp %02d%02d)",
6826 (ioc->facts.FWVersion.Word >> 16) & 0x00FF, /* Month */
6827 (ioc->facts.FWVersion.Word >> 8) & 0x1F); /* Day */
6828
6829 /* insider hack! */
6830 if ((ioc->facts.FWVersion.Word >> 8) & 0x80)
6831 strcat(buf, " [MDBG]");
6832 }
6833 }
6834
6835 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
6836 /**
6837 * mpt_print_ioc_summary - Write ASCII summary of IOC to a buffer.
6838 * @ioc: Pointer to MPT_ADAPTER structure
6839 * @buffer: Pointer to buffer where IOC summary info should be written
6840 * @size: Pointer to number of bytes we wrote (set by this routine)
6841 * @len: Offset at which to start writing in buffer
6842 * @showlan: Display LAN stuff?
6843 *
6844 * This routine writes (english readable) ASCII text, which represents
6845 * a summary of IOC information, to a buffer.
6846 */
6847 void
mpt_print_ioc_summary(MPT_ADAPTER * ioc,char * buffer,int * size,int len,int showlan)6848 mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int showlan)
6849 {
6850 char expVer[32];
6851 int y;
6852
6853 mpt_get_fw_exp_ver(expVer, ioc);
6854
6855 /*
6856 * Shorter summary of attached ioc's...
6857 */
6858 y = sprintf(buffer+len, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6859 ioc->name,
6860 ioc->prod_name,
6861 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
6862 ioc->facts.FWVersion.Word,
6863 expVer,
6864 ioc->facts.NumberOfPorts,
6865 ioc->req_depth);
6866
6867 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6868 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6869 y += sprintf(buffer+len+y, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X",
6870 a[5], a[4], a[3], a[2], a[1], a[0]);
6871 }
6872
6873 y += sprintf(buffer+len+y, ", IRQ=%d", ioc->pci_irq);
6874
6875 if (!ioc->active)
6876 y += sprintf(buffer+len+y, " (disabled)");
6877
6878 y += sprintf(buffer+len+y, "\n");
6879
6880 *size = y;
6881 }
6882
seq_mpt_print_ioc_summary(MPT_ADAPTER * ioc,struct seq_file * m,int showlan)6883 static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan)
6884 {
6885 char expVer[32];
6886
6887 mpt_get_fw_exp_ver(expVer, ioc);
6888
6889 /*
6890 * Shorter summary of attached ioc's...
6891 */
6892 seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
6893 ioc->name,
6894 ioc->prod_name,
6895 MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
6896 ioc->facts.FWVersion.Word,
6897 expVer,
6898 ioc->facts.NumberOfPorts,
6899 ioc->req_depth);
6900
6901 if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
6902 u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
6903 seq_printf(m, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X",
6904 a[5], a[4], a[3], a[2], a[1], a[0]);
6905 }
6906
6907 seq_printf(m, ", IRQ=%d", ioc->pci_irq);
6908
6909 if (!ioc->active)
6910 seq_printf(m, " (disabled)");
6911
6912 seq_putc(m, '\n');
6913 }
6914
6915 /**
6916 * mpt_set_taskmgmt_in_progress_flag - set flags associated with task management
6917 * @ioc: Pointer to MPT_ADAPTER structure
6918 *
6919 * Returns 0 for SUCCESS or -1 if FAILED.
6920 *
6921 * If -1 is return, then it was not possible to set the flags
6922 **/
6923 int
mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER * ioc)6924 mpt_set_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6925 {
6926 unsigned long flags;
6927 int retval;
6928
6929 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6930 if (ioc->ioc_reset_in_progress || ioc->taskmgmt_in_progress ||
6931 (ioc->alt_ioc && ioc->alt_ioc->taskmgmt_in_progress)) {
6932 retval = -1;
6933 goto out;
6934 }
6935 retval = 0;
6936 ioc->taskmgmt_in_progress = 1;
6937 ioc->taskmgmt_quiesce_io = 1;
6938 if (ioc->alt_ioc) {
6939 ioc->alt_ioc->taskmgmt_in_progress = 1;
6940 ioc->alt_ioc->taskmgmt_quiesce_io = 1;
6941 }
6942 out:
6943 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6944 return retval;
6945 }
6946 EXPORT_SYMBOL(mpt_set_taskmgmt_in_progress_flag);
6947
6948 /**
6949 * mpt_clear_taskmgmt_in_progress_flag - clear flags associated with task management
6950 * @ioc: Pointer to MPT_ADAPTER structure
6951 *
6952 **/
6953 void
mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER * ioc)6954 mpt_clear_taskmgmt_in_progress_flag(MPT_ADAPTER *ioc)
6955 {
6956 unsigned long flags;
6957
6958 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
6959 ioc->taskmgmt_in_progress = 0;
6960 ioc->taskmgmt_quiesce_io = 0;
6961 if (ioc->alt_ioc) {
6962 ioc->alt_ioc->taskmgmt_in_progress = 0;
6963 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
6964 }
6965 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
6966 }
6967 EXPORT_SYMBOL(mpt_clear_taskmgmt_in_progress_flag);
6968
6969
6970 /**
6971 * mpt_halt_firmware - Halts the firmware if it is operational and panic
6972 * the kernel
6973 * @ioc: Pointer to MPT_ADAPTER structure
6974 *
6975 **/
6976 void
mpt_halt_firmware(MPT_ADAPTER * ioc)6977 mpt_halt_firmware(MPT_ADAPTER *ioc)
6978 {
6979 u32 ioc_raw_state;
6980
6981 ioc_raw_state = mpt_GetIocState(ioc, 0);
6982
6983 if ((ioc_raw_state & MPI_IOC_STATE_MASK) == MPI_IOC_STATE_FAULT) {
6984 printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n",
6985 ioc->name, ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6986 panic("%s: IOC Fault (%04xh)!!!\n", ioc->name,
6987 ioc_raw_state & MPI_DOORBELL_DATA_MASK);
6988 } else {
6989 CHIPREG_WRITE32(&ioc->chip->Doorbell, 0xC0FFEE00);
6990 panic("%s: Firmware is halted due to command timeout\n",
6991 ioc->name);
6992 }
6993 }
6994 EXPORT_SYMBOL(mpt_halt_firmware);
6995
6996 /**
6997 * mpt_SoftResetHandler - Issues a less expensive reset
6998 * @ioc: Pointer to MPT_ADAPTER structure
6999 * @sleepFlag: Indicates if sleep or schedule must be called.
7000 *
7001 * Returns 0 for SUCCESS or -1 if FAILED.
7002 *
7003 * Message Unit Reset - instructs the IOC to reset the Reply Post and
7004 * Free FIFO's. All the Message Frames on Reply Free FIFO are discarded.
7005 * All posted buffers are freed, and event notification is turned off.
7006 * IOC doesn't reply to any outstanding request. This will transfer IOC
7007 * to READY state.
7008 **/
7009 int
mpt_SoftResetHandler(MPT_ADAPTER * ioc,int sleepFlag)7010 mpt_SoftResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
7011 {
7012 int rc;
7013 int ii;
7014 u8 cb_idx;
7015 unsigned long flags;
7016 u32 ioc_state;
7017 unsigned long time_count;
7018
7019 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SoftResetHandler Entered!\n",
7020 ioc->name));
7021
7022 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
7023
7024 if (mpt_fwfault_debug)
7025 mpt_halt_firmware(ioc);
7026
7027 if (ioc_state == MPI_IOC_STATE_FAULT ||
7028 ioc_state == MPI_IOC_STATE_RESET) {
7029 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7030 "skipping, either in FAULT or RESET state!\n", ioc->name));
7031 return -1;
7032 }
7033
7034 if (ioc->bus_type == FC) {
7035 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7036 "skipping, because the bus type is FC!\n", ioc->name));
7037 return -1;
7038 }
7039
7040 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7041 if (ioc->ioc_reset_in_progress) {
7042 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7043 return -1;
7044 }
7045 ioc->ioc_reset_in_progress = 1;
7046 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7047
7048 rc = -1;
7049
7050 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7051 if (MptResetHandlers[cb_idx])
7052 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7053 }
7054
7055 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7056 if (ioc->taskmgmt_in_progress) {
7057 ioc->ioc_reset_in_progress = 0;
7058 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7059 return -1;
7060 }
7061 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7062 /* Disable reply interrupts (also blocks FreeQ) */
7063 CHIPREG_WRITE32(&ioc->chip->IntMask, 0xFFFFFFFF);
7064 ioc->active = 0;
7065 time_count = jiffies;
7066
7067 rc = SendIocReset(ioc, MPI_FUNCTION_IOC_MESSAGE_UNIT_RESET, sleepFlag);
7068
7069 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7070 if (MptResetHandlers[cb_idx])
7071 mpt_signal_reset(cb_idx, ioc, MPT_IOC_PRE_RESET);
7072 }
7073
7074 if (rc)
7075 goto out;
7076
7077 ioc_state = mpt_GetIocState(ioc, 0) & MPI_IOC_STATE_MASK;
7078 if (ioc_state != MPI_IOC_STATE_READY)
7079 goto out;
7080
7081 for (ii = 0; ii < 5; ii++) {
7082 /* Get IOC facts! Allow 5 retries */
7083 rc = GetIocFacts(ioc, sleepFlag,
7084 MPT_HOSTEVENT_IOC_RECOVER);
7085 if (rc == 0)
7086 break;
7087 if (sleepFlag == CAN_SLEEP)
7088 msleep(100);
7089 else
7090 mdelay(100);
7091 }
7092 if (ii == 5)
7093 goto out;
7094
7095 rc = PrimeIocFifos(ioc);
7096 if (rc != 0)
7097 goto out;
7098
7099 rc = SendIocInit(ioc, sleepFlag);
7100 if (rc != 0)
7101 goto out;
7102
7103 rc = SendEventNotification(ioc, 1, sleepFlag);
7104 if (rc != 0)
7105 goto out;
7106
7107 if (ioc->hard_resets < -1)
7108 ioc->hard_resets++;
7109
7110 /*
7111 * At this point, we know soft reset succeeded.
7112 */
7113
7114 ioc->active = 1;
7115 CHIPREG_WRITE32(&ioc->chip->IntMask, MPI_HIM_DIM);
7116
7117 out:
7118 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7119 ioc->ioc_reset_in_progress = 0;
7120 ioc->taskmgmt_quiesce_io = 0;
7121 ioc->taskmgmt_in_progress = 0;
7122 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7123
7124 if (ioc->active) { /* otherwise, hard reset coming */
7125 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7126 if (MptResetHandlers[cb_idx])
7127 mpt_signal_reset(cb_idx, ioc,
7128 MPT_IOC_POST_RESET);
7129 }
7130 }
7131
7132 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7133 "SoftResetHandler: completed (%d seconds): %s\n",
7134 ioc->name, jiffies_to_msecs(jiffies - time_count)/1000,
7135 ((rc == 0) ? "SUCCESS" : "FAILED")));
7136
7137 return rc;
7138 }
7139
7140 /**
7141 * mpt_Soft_Hard_ResetHandler - Try less expensive reset
7142 * @ioc: Pointer to MPT_ADAPTER structure
7143 * @sleepFlag: Indicates if sleep or schedule must be called.
7144 *
7145 * Returns 0 for SUCCESS or -1 if FAILED.
7146 * Try for softreset first, only if it fails go for expensive
7147 * HardReset.
7148 **/
7149 int
mpt_Soft_Hard_ResetHandler(MPT_ADAPTER * ioc,int sleepFlag)7150 mpt_Soft_Hard_ResetHandler(MPT_ADAPTER *ioc, int sleepFlag) {
7151 int ret = -1;
7152
7153 ret = mpt_SoftResetHandler(ioc, sleepFlag);
7154 if (ret == 0)
7155 return ret;
7156 ret = mpt_HardResetHandler(ioc, sleepFlag);
7157 return ret;
7158 }
7159 EXPORT_SYMBOL(mpt_Soft_Hard_ResetHandler);
7160
7161 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7162 /*
7163 * Reset Handling
7164 */
7165 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7166 /**
7167 * mpt_HardResetHandler - Generic reset handler
7168 * @ioc: Pointer to MPT_ADAPTER structure
7169 * @sleepFlag: Indicates if sleep or schedule must be called.
7170 *
7171 * Issues SCSI Task Management call based on input arg values.
7172 * If TaskMgmt fails, returns associated SCSI request.
7173 *
7174 * Remark: _HardResetHandler can be invoked from an interrupt thread (timer)
7175 * or a non-interrupt thread. In the former, must not call schedule().
7176 *
7177 * Note: A return of -1 is a FATAL error case, as it means a
7178 * FW reload/initialization failed.
7179 *
7180 * Returns 0 for SUCCESS or -1 if FAILED.
7181 */
7182 int
mpt_HardResetHandler(MPT_ADAPTER * ioc,int sleepFlag)7183 mpt_HardResetHandler(MPT_ADAPTER *ioc, int sleepFlag)
7184 {
7185 int rc;
7186 u8 cb_idx;
7187 unsigned long flags;
7188 unsigned long time_count;
7189
7190 dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name));
7191 #ifdef MFCNT
7192 printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name);
7193 printk("MF count 0x%x !\n", ioc->mfcnt);
7194 #endif
7195 if (mpt_fwfault_debug)
7196 mpt_halt_firmware(ioc);
7197
7198 /* Reset the adapter. Prevent more than 1 call to
7199 * mpt_do_ioc_recovery at any instant in time.
7200 */
7201 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7202 if (ioc->ioc_reset_in_progress) {
7203 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7204 ioc->wait_on_reset_completion = 1;
7205 do {
7206 ssleep(1);
7207 } while (ioc->ioc_reset_in_progress == 1);
7208 ioc->wait_on_reset_completion = 0;
7209 return ioc->reset_status;
7210 }
7211 if (ioc->wait_on_reset_completion) {
7212 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7213 rc = 0;
7214 time_count = jiffies;
7215 goto exit;
7216 }
7217 ioc->ioc_reset_in_progress = 1;
7218 if (ioc->alt_ioc)
7219 ioc->alt_ioc->ioc_reset_in_progress = 1;
7220 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7221
7222
7223 /* The SCSI driver needs to adjust timeouts on all current
7224 * commands prior to the diagnostic reset being issued.
7225 * Prevents timeouts occurring during a diagnostic reset...very bad.
7226 * For all other protocol drivers, this is a no-op.
7227 */
7228 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7229 if (MptResetHandlers[cb_idx]) {
7230 mpt_signal_reset(cb_idx, ioc, MPT_IOC_SETUP_RESET);
7231 if (ioc->alt_ioc)
7232 mpt_signal_reset(cb_idx, ioc->alt_ioc,
7233 MPT_IOC_SETUP_RESET);
7234 }
7235 }
7236
7237 time_count = jiffies;
7238 rc = mpt_do_ioc_recovery(ioc, MPT_HOSTEVENT_IOC_RECOVER, sleepFlag);
7239 if (rc != 0) {
7240 printk(KERN_WARNING MYNAM
7241 ": WARNING - (%d) Cannot recover %s, doorbell=0x%08x\n",
7242 rc, ioc->name, mpt_GetIocState(ioc, 0));
7243 } else {
7244 if (ioc->hard_resets < -1)
7245 ioc->hard_resets++;
7246 }
7247
7248 spin_lock_irqsave(&ioc->taskmgmt_lock, flags);
7249 ioc->ioc_reset_in_progress = 0;
7250 ioc->taskmgmt_quiesce_io = 0;
7251 ioc->taskmgmt_in_progress = 0;
7252 ioc->reset_status = rc;
7253 if (ioc->alt_ioc) {
7254 ioc->alt_ioc->ioc_reset_in_progress = 0;
7255 ioc->alt_ioc->taskmgmt_quiesce_io = 0;
7256 ioc->alt_ioc->taskmgmt_in_progress = 0;
7257 }
7258 spin_unlock_irqrestore(&ioc->taskmgmt_lock, flags);
7259
7260 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7261 if (MptResetHandlers[cb_idx]) {
7262 mpt_signal_reset(cb_idx, ioc, MPT_IOC_POST_RESET);
7263 if (ioc->alt_ioc)
7264 mpt_signal_reset(cb_idx,
7265 ioc->alt_ioc, MPT_IOC_POST_RESET);
7266 }
7267 }
7268 exit:
7269 dtmprintk(ioc,
7270 printk(MYIOC_s_DEBUG_FMT
7271 "HardResetHandler: completed (%d seconds): %s\n", ioc->name,
7272 jiffies_to_msecs(jiffies - time_count)/1000, ((rc == 0) ?
7273 "SUCCESS" : "FAILED")));
7274
7275 return rc;
7276 }
7277
7278 #ifdef CONFIG_FUSION_LOGGING
7279 static void
mpt_display_event_info(MPT_ADAPTER * ioc,EventNotificationReply_t * pEventReply)7280 mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply)
7281 {
7282 char *ds = NULL;
7283 u32 evData0;
7284 int ii;
7285 u8 event;
7286 char *evStr = ioc->evStr;
7287
7288 event = le32_to_cpu(pEventReply->Event) & 0xFF;
7289 evData0 = le32_to_cpu(pEventReply->Data[0]);
7290
7291 switch(event) {
7292 case MPI_EVENT_NONE:
7293 ds = "None";
7294 break;
7295 case MPI_EVENT_LOG_DATA:
7296 ds = "Log Data";
7297 break;
7298 case MPI_EVENT_STATE_CHANGE:
7299 ds = "State Change";
7300 break;
7301 case MPI_EVENT_UNIT_ATTENTION:
7302 ds = "Unit Attention";
7303 break;
7304 case MPI_EVENT_IOC_BUS_RESET:
7305 ds = "IOC Bus Reset";
7306 break;
7307 case MPI_EVENT_EXT_BUS_RESET:
7308 ds = "External Bus Reset";
7309 break;
7310 case MPI_EVENT_RESCAN:
7311 ds = "Bus Rescan Event";
7312 break;
7313 case MPI_EVENT_LINK_STATUS_CHANGE:
7314 if (evData0 == MPI_EVENT_LINK_STATUS_FAILURE)
7315 ds = "Link Status(FAILURE) Change";
7316 else
7317 ds = "Link Status(ACTIVE) Change";
7318 break;
7319 case MPI_EVENT_LOOP_STATE_CHANGE:
7320 if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LIP)
7321 ds = "Loop State(LIP) Change";
7322 else if (evData0 == MPI_EVENT_LOOP_STATE_CHANGE_LPE)
7323 ds = "Loop State(LPE) Change";
7324 else
7325 ds = "Loop State(LPB) Change";
7326 break;
7327 case MPI_EVENT_LOGOUT:
7328 ds = "Logout";
7329 break;
7330 case MPI_EVENT_EVENT_CHANGE:
7331 if (evData0)
7332 ds = "Events ON";
7333 else
7334 ds = "Events OFF";
7335 break;
7336 case MPI_EVENT_INTEGRATED_RAID:
7337 {
7338 u8 ReasonCode = (u8)(evData0 >> 16);
7339 switch (ReasonCode) {
7340 case MPI_EVENT_RAID_RC_VOLUME_CREATED :
7341 ds = "Integrated Raid: Volume Created";
7342 break;
7343 case MPI_EVENT_RAID_RC_VOLUME_DELETED :
7344 ds = "Integrated Raid: Volume Deleted";
7345 break;
7346 case MPI_EVENT_RAID_RC_VOLUME_SETTINGS_CHANGED :
7347 ds = "Integrated Raid: Volume Settings Changed";
7348 break;
7349 case MPI_EVENT_RAID_RC_VOLUME_STATUS_CHANGED :
7350 ds = "Integrated Raid: Volume Status Changed";
7351 break;
7352 case MPI_EVENT_RAID_RC_VOLUME_PHYSDISK_CHANGED :
7353 ds = "Integrated Raid: Volume Physdisk Changed";
7354 break;
7355 case MPI_EVENT_RAID_RC_PHYSDISK_CREATED :
7356 ds = "Integrated Raid: Physdisk Created";
7357 break;
7358 case MPI_EVENT_RAID_RC_PHYSDISK_DELETED :
7359 ds = "Integrated Raid: Physdisk Deleted";
7360 break;
7361 case MPI_EVENT_RAID_RC_PHYSDISK_SETTINGS_CHANGED :
7362 ds = "Integrated Raid: Physdisk Settings Changed";
7363 break;
7364 case MPI_EVENT_RAID_RC_PHYSDISK_STATUS_CHANGED :
7365 ds = "Integrated Raid: Physdisk Status Changed";
7366 break;
7367 case MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED :
7368 ds = "Integrated Raid: Domain Validation Needed";
7369 break;
7370 case MPI_EVENT_RAID_RC_SMART_DATA :
7371 ds = "Integrated Raid; Smart Data";
7372 break;
7373 case MPI_EVENT_RAID_RC_REPLACE_ACTION_STARTED :
7374 ds = "Integrated Raid: Replace Action Started";
7375 break;
7376 default:
7377 ds = "Integrated Raid";
7378 break;
7379 }
7380 break;
7381 }
7382 case MPI_EVENT_SCSI_DEVICE_STATUS_CHANGE:
7383 ds = "SCSI Device Status Change";
7384 break;
7385 case MPI_EVENT_SAS_DEVICE_STATUS_CHANGE:
7386 {
7387 u8 id = (u8)(evData0);
7388 u8 channel = (u8)(evData0 >> 8);
7389 u8 ReasonCode = (u8)(evData0 >> 16);
7390 switch (ReasonCode) {
7391 case MPI_EVENT_SAS_DEV_STAT_RC_ADDED:
7392 snprintf(evStr, EVENT_DESCR_STR_SZ,
7393 "SAS Device Status Change: Added: "
7394 "id=%d channel=%d", id, channel);
7395 break;
7396 case MPI_EVENT_SAS_DEV_STAT_RC_NOT_RESPONDING:
7397 snprintf(evStr, EVENT_DESCR_STR_SZ,
7398 "SAS Device Status Change: Deleted: "
7399 "id=%d channel=%d", id, channel);
7400 break;
7401 case MPI_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
7402 snprintf(evStr, EVENT_DESCR_STR_SZ,
7403 "SAS Device Status Change: SMART Data: "
7404 "id=%d channel=%d", id, channel);
7405 break;
7406 case MPI_EVENT_SAS_DEV_STAT_RC_NO_PERSIST_ADDED:
7407 snprintf(evStr, EVENT_DESCR_STR_SZ,
7408 "SAS Device Status Change: No Persistancy: "
7409 "id=%d channel=%d", id, channel);
7410 break;
7411 case MPI_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
7412 snprintf(evStr, EVENT_DESCR_STR_SZ,
7413 "SAS Device Status Change: Unsupported Device "
7414 "Discovered : id=%d channel=%d", id, channel);
7415 break;
7416 case MPI_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
7417 snprintf(evStr, EVENT_DESCR_STR_SZ,
7418 "SAS Device Status Change: Internal Device "
7419 "Reset : id=%d channel=%d", id, channel);
7420 break;
7421 case MPI_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
7422 snprintf(evStr, EVENT_DESCR_STR_SZ,
7423 "SAS Device Status Change: Internal Task "
7424 "Abort : id=%d channel=%d", id, channel);
7425 break;
7426 case MPI_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
7427 snprintf(evStr, EVENT_DESCR_STR_SZ,
7428 "SAS Device Status Change: Internal Abort "
7429 "Task Set : id=%d channel=%d", id, channel);
7430 break;
7431 case MPI_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
7432 snprintf(evStr, EVENT_DESCR_STR_SZ,
7433 "SAS Device Status Change: Internal Clear "
7434 "Task Set : id=%d channel=%d", id, channel);
7435 break;
7436 case MPI_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
7437 snprintf(evStr, EVENT_DESCR_STR_SZ,
7438 "SAS Device Status Change: Internal Query "
7439 "Task : id=%d channel=%d", id, channel);
7440 break;
7441 default:
7442 snprintf(evStr, EVENT_DESCR_STR_SZ,
7443 "SAS Device Status Change: Unknown: "
7444 "id=%d channel=%d", id, channel);
7445 break;
7446 }
7447 break;
7448 }
7449 case MPI_EVENT_ON_BUS_TIMER_EXPIRED:
7450 ds = "Bus Timer Expired";
7451 break;
7452 case MPI_EVENT_QUEUE_FULL:
7453 {
7454 u16 curr_depth = (u16)(evData0 >> 16);
7455 u8 channel = (u8)(evData0 >> 8);
7456 u8 id = (u8)(evData0);
7457
7458 snprintf(evStr, EVENT_DESCR_STR_SZ,
7459 "Queue Full: channel=%d id=%d depth=%d",
7460 channel, id, curr_depth);
7461 break;
7462 }
7463 case MPI_EVENT_SAS_SES:
7464 ds = "SAS SES Event";
7465 break;
7466 case MPI_EVENT_PERSISTENT_TABLE_FULL:
7467 ds = "Persistent Table Full";
7468 break;
7469 case MPI_EVENT_SAS_PHY_LINK_STATUS:
7470 {
7471 u8 LinkRates = (u8)(evData0 >> 8);
7472 u8 PhyNumber = (u8)(evData0);
7473 LinkRates = (LinkRates & MPI_EVENT_SAS_PLS_LR_CURRENT_MASK) >>
7474 MPI_EVENT_SAS_PLS_LR_CURRENT_SHIFT;
7475 switch (LinkRates) {
7476 case MPI_EVENT_SAS_PLS_LR_RATE_UNKNOWN:
7477 snprintf(evStr, EVENT_DESCR_STR_SZ,
7478 "SAS PHY Link Status: Phy=%d:"
7479 " Rate Unknown",PhyNumber);
7480 break;
7481 case MPI_EVENT_SAS_PLS_LR_RATE_PHY_DISABLED:
7482 snprintf(evStr, EVENT_DESCR_STR_SZ,
7483 "SAS PHY Link Status: Phy=%d:"
7484 " Phy Disabled",PhyNumber);
7485 break;
7486 case MPI_EVENT_SAS_PLS_LR_RATE_FAILED_SPEED_NEGOTIATION:
7487 snprintf(evStr, EVENT_DESCR_STR_SZ,
7488 "SAS PHY Link Status: Phy=%d:"
7489 " Failed Speed Nego",PhyNumber);
7490 break;
7491 case MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE:
7492 snprintf(evStr, EVENT_DESCR_STR_SZ,
7493 "SAS PHY Link Status: Phy=%d:"
7494 " Sata OOB Completed",PhyNumber);
7495 break;
7496 case MPI_EVENT_SAS_PLS_LR_RATE_1_5:
7497 snprintf(evStr, EVENT_DESCR_STR_SZ,
7498 "SAS PHY Link Status: Phy=%d:"
7499 " Rate 1.5 Gbps",PhyNumber);
7500 break;
7501 case MPI_EVENT_SAS_PLS_LR_RATE_3_0:
7502 snprintf(evStr, EVENT_DESCR_STR_SZ,
7503 "SAS PHY Link Status: Phy=%d:"
7504 " Rate 3.0 Gbps", PhyNumber);
7505 break;
7506 case MPI_EVENT_SAS_PLS_LR_RATE_6_0:
7507 snprintf(evStr, EVENT_DESCR_STR_SZ,
7508 "SAS PHY Link Status: Phy=%d:"
7509 " Rate 6.0 Gbps", PhyNumber);
7510 break;
7511 default:
7512 snprintf(evStr, EVENT_DESCR_STR_SZ,
7513 "SAS PHY Link Status: Phy=%d", PhyNumber);
7514 break;
7515 }
7516 break;
7517 }
7518 case MPI_EVENT_SAS_DISCOVERY_ERROR:
7519 ds = "SAS Discovery Error";
7520 break;
7521 case MPI_EVENT_IR_RESYNC_UPDATE:
7522 {
7523 u8 resync_complete = (u8)(evData0 >> 16);
7524 snprintf(evStr, EVENT_DESCR_STR_SZ,
7525 "IR Resync Update: Complete = %d:",resync_complete);
7526 break;
7527 }
7528 case MPI_EVENT_IR2:
7529 {
7530 u8 id = (u8)(evData0);
7531 u8 channel = (u8)(evData0 >> 8);
7532 u8 phys_num = (u8)(evData0 >> 24);
7533 u8 ReasonCode = (u8)(evData0 >> 16);
7534
7535 switch (ReasonCode) {
7536 case MPI_EVENT_IR2_RC_LD_STATE_CHANGED:
7537 snprintf(evStr, EVENT_DESCR_STR_SZ,
7538 "IR2: LD State Changed: "
7539 "id=%d channel=%d phys_num=%d",
7540 id, channel, phys_num);
7541 break;
7542 case MPI_EVENT_IR2_RC_PD_STATE_CHANGED:
7543 snprintf(evStr, EVENT_DESCR_STR_SZ,
7544 "IR2: PD State Changed "
7545 "id=%d channel=%d phys_num=%d",
7546 id, channel, phys_num);
7547 break;
7548 case MPI_EVENT_IR2_RC_BAD_BLOCK_TABLE_FULL:
7549 snprintf(evStr, EVENT_DESCR_STR_SZ,
7550 "IR2: Bad Block Table Full: "
7551 "id=%d channel=%d phys_num=%d",
7552 id, channel, phys_num);
7553 break;
7554 case MPI_EVENT_IR2_RC_PD_INSERTED:
7555 snprintf(evStr, EVENT_DESCR_STR_SZ,
7556 "IR2: PD Inserted: "
7557 "id=%d channel=%d phys_num=%d",
7558 id, channel, phys_num);
7559 break;
7560 case MPI_EVENT_IR2_RC_PD_REMOVED:
7561 snprintf(evStr, EVENT_DESCR_STR_SZ,
7562 "IR2: PD Removed: "
7563 "id=%d channel=%d phys_num=%d",
7564 id, channel, phys_num);
7565 break;
7566 case MPI_EVENT_IR2_RC_FOREIGN_CFG_DETECTED:
7567 snprintf(evStr, EVENT_DESCR_STR_SZ,
7568 "IR2: Foreign CFG Detected: "
7569 "id=%d channel=%d phys_num=%d",
7570 id, channel, phys_num);
7571 break;
7572 case MPI_EVENT_IR2_RC_REBUILD_MEDIUM_ERROR:
7573 snprintf(evStr, EVENT_DESCR_STR_SZ,
7574 "IR2: Rebuild Medium Error: "
7575 "id=%d channel=%d phys_num=%d",
7576 id, channel, phys_num);
7577 break;
7578 case MPI_EVENT_IR2_RC_DUAL_PORT_ADDED:
7579 snprintf(evStr, EVENT_DESCR_STR_SZ,
7580 "IR2: Dual Port Added: "
7581 "id=%d channel=%d phys_num=%d",
7582 id, channel, phys_num);
7583 break;
7584 case MPI_EVENT_IR2_RC_DUAL_PORT_REMOVED:
7585 snprintf(evStr, EVENT_DESCR_STR_SZ,
7586 "IR2: Dual Port Removed: "
7587 "id=%d channel=%d phys_num=%d",
7588 id, channel, phys_num);
7589 break;
7590 default:
7591 ds = "IR2";
7592 break;
7593 }
7594 break;
7595 }
7596 case MPI_EVENT_SAS_DISCOVERY:
7597 {
7598 if (evData0)
7599 ds = "SAS Discovery: Start";
7600 else
7601 ds = "SAS Discovery: Stop";
7602 break;
7603 }
7604 case MPI_EVENT_LOG_ENTRY_ADDED:
7605 ds = "SAS Log Entry Added";
7606 break;
7607
7608 case MPI_EVENT_SAS_BROADCAST_PRIMITIVE:
7609 {
7610 u8 phy_num = (u8)(evData0);
7611 u8 port_num = (u8)(evData0 >> 8);
7612 u8 port_width = (u8)(evData0 >> 16);
7613 u8 primative = (u8)(evData0 >> 24);
7614 snprintf(evStr, EVENT_DESCR_STR_SZ,
7615 "SAS Broadcase Primative: phy=%d port=%d "
7616 "width=%d primative=0x%02x",
7617 phy_num, port_num, port_width, primative);
7618 break;
7619 }
7620
7621 case MPI_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE:
7622 {
7623 u8 reason = (u8)(evData0);
7624
7625 switch (reason) {
7626 case MPI_EVENT_SAS_INIT_RC_ADDED:
7627 ds = "SAS Initiator Status Change: Added";
7628 break;
7629 case MPI_EVENT_SAS_INIT_RC_REMOVED:
7630 ds = "SAS Initiator Status Change: Deleted";
7631 break;
7632 default:
7633 ds = "SAS Initiator Status Change";
7634 break;
7635 }
7636 break;
7637 }
7638
7639 case MPI_EVENT_SAS_INIT_TABLE_OVERFLOW:
7640 {
7641 u8 max_init = (u8)(evData0);
7642 u8 current_init = (u8)(evData0 >> 8);
7643
7644 snprintf(evStr, EVENT_DESCR_STR_SZ,
7645 "SAS Initiator Device Table Overflow: max initiators=%02d "
7646 "current initators=%02d",
7647 max_init, current_init);
7648 break;
7649 }
7650 case MPI_EVENT_SAS_SMP_ERROR:
7651 {
7652 u8 status = (u8)(evData0);
7653 u8 port_num = (u8)(evData0 >> 8);
7654 u8 result = (u8)(evData0 >> 16);
7655
7656 if (status == MPI_EVENT_SAS_SMP_FUNCTION_RESULT_VALID)
7657 snprintf(evStr, EVENT_DESCR_STR_SZ,
7658 "SAS SMP Error: port=%d result=0x%02x",
7659 port_num, result);
7660 else if (status == MPI_EVENT_SAS_SMP_CRC_ERROR)
7661 snprintf(evStr, EVENT_DESCR_STR_SZ,
7662 "SAS SMP Error: port=%d : CRC Error",
7663 port_num);
7664 else if (status == MPI_EVENT_SAS_SMP_TIMEOUT)
7665 snprintf(evStr, EVENT_DESCR_STR_SZ,
7666 "SAS SMP Error: port=%d : Timeout",
7667 port_num);
7668 else if (status == MPI_EVENT_SAS_SMP_NO_DESTINATION)
7669 snprintf(evStr, EVENT_DESCR_STR_SZ,
7670 "SAS SMP Error: port=%d : No Destination",
7671 port_num);
7672 else if (status == MPI_EVENT_SAS_SMP_BAD_DESTINATION)
7673 snprintf(evStr, EVENT_DESCR_STR_SZ,
7674 "SAS SMP Error: port=%d : Bad Destination",
7675 port_num);
7676 else
7677 snprintf(evStr, EVENT_DESCR_STR_SZ,
7678 "SAS SMP Error: port=%d : status=0x%02x",
7679 port_num, status);
7680 break;
7681 }
7682
7683 case MPI_EVENT_SAS_EXPANDER_STATUS_CHANGE:
7684 {
7685 u8 reason = (u8)(evData0);
7686
7687 switch (reason) {
7688 case MPI_EVENT_SAS_EXP_RC_ADDED:
7689 ds = "Expander Status Change: Added";
7690 break;
7691 case MPI_EVENT_SAS_EXP_RC_NOT_RESPONDING:
7692 ds = "Expander Status Change: Deleted";
7693 break;
7694 default:
7695 ds = "Expander Status Change";
7696 break;
7697 }
7698 break;
7699 }
7700
7701 /*
7702 * MPT base "custom" events may be added here...
7703 */
7704 default:
7705 ds = "Unknown";
7706 break;
7707 }
7708 if (ds)
7709 strncpy(evStr, ds, EVENT_DESCR_STR_SZ);
7710
7711
7712 devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7713 "MPT event:(%02Xh) : %s\n",
7714 ioc->name, event, evStr));
7715
7716 devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM
7717 ": Event data:\n"));
7718 for (ii = 0; ii < le16_to_cpu(pEventReply->EventDataLength); ii++)
7719 devtverboseprintk(ioc, printk(" %08x",
7720 le32_to_cpu(pEventReply->Data[ii])));
7721 devtverboseprintk(ioc, printk(KERN_DEBUG "\n"));
7722 }
7723 #endif
7724 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7725 /**
7726 * ProcessEventNotification - Route EventNotificationReply to all event handlers
7727 * @ioc: Pointer to MPT_ADAPTER structure
7728 * @pEventReply: Pointer to EventNotification reply frame
7729 * @evHandlers: Pointer to integer, number of event handlers
7730 *
7731 * Routes a received EventNotificationReply to all currently registered
7732 * event handlers.
7733 * Returns sum of event handlers return values.
7734 */
7735 static int
ProcessEventNotification(MPT_ADAPTER * ioc,EventNotificationReply_t * pEventReply,int * evHandlers)7736 ProcessEventNotification(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply, int *evHandlers)
7737 {
7738 u16 evDataLen;
7739 u32 evData0 = 0;
7740 int ii;
7741 u8 cb_idx;
7742 int r = 0;
7743 int handlers = 0;
7744 u8 event;
7745
7746 /*
7747 * Do platform normalization of values
7748 */
7749 event = le32_to_cpu(pEventReply->Event) & 0xFF;
7750 evDataLen = le16_to_cpu(pEventReply->EventDataLength);
7751 if (evDataLen) {
7752 evData0 = le32_to_cpu(pEventReply->Data[0]);
7753 }
7754
7755 #ifdef CONFIG_FUSION_LOGGING
7756 if (evDataLen)
7757 mpt_display_event_info(ioc, pEventReply);
7758 #endif
7759
7760 /*
7761 * Do general / base driver event processing
7762 */
7763 switch(event) {
7764 case MPI_EVENT_EVENT_CHANGE: /* 0A */
7765 if (evDataLen) {
7766 u8 evState = evData0 & 0xFF;
7767
7768 /* CHECKME! What if evState unexpectedly says OFF (0)? */
7769
7770 /* Update EventState field in cached IocFacts */
7771 if (ioc->facts.Function) {
7772 ioc->facts.EventState = evState;
7773 }
7774 }
7775 break;
7776 case MPI_EVENT_INTEGRATED_RAID:
7777 mptbase_raid_process_event_data(ioc,
7778 (MpiEventDataRaid_t *)pEventReply->Data);
7779 break;
7780 default:
7781 break;
7782 }
7783
7784 /*
7785 * Should this event be logged? Events are written sequentially.
7786 * When buffer is full, start again at the top.
7787 */
7788 if (ioc->events && (ioc->eventTypes & ( 1 << event))) {
7789 int idx;
7790
7791 idx = ioc->eventContext % MPTCTL_EVENT_LOG_SIZE;
7792
7793 ioc->events[idx].event = event;
7794 ioc->events[idx].eventContext = ioc->eventContext;
7795
7796 for (ii = 0; ii < 2; ii++) {
7797 if (ii < evDataLen)
7798 ioc->events[idx].data[ii] = le32_to_cpu(pEventReply->Data[ii]);
7799 else
7800 ioc->events[idx].data[ii] = 0;
7801 }
7802
7803 ioc->eventContext++;
7804 }
7805
7806
7807 /*
7808 * Call each currently registered protocol event handler.
7809 */
7810 for (cb_idx = MPT_MAX_PROTOCOL_DRIVERS-1; cb_idx; cb_idx--) {
7811 if (MptEvHandlers[cb_idx]) {
7812 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7813 "Routing Event to event handler #%d\n",
7814 ioc->name, cb_idx));
7815 r += (*(MptEvHandlers[cb_idx]))(ioc, pEventReply);
7816 handlers++;
7817 }
7818 }
7819 /* FIXME? Examine results here? */
7820
7821 /*
7822 * If needed, send (a single) EventAck.
7823 */
7824 if (pEventReply->AckRequired == MPI_EVENT_NOTIFICATION_ACK_REQUIRED) {
7825 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
7826 "EventAck required\n",ioc->name));
7827 if ((ii = SendEventAck(ioc, pEventReply)) != 0) {
7828 devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SendEventAck returned %d\n",
7829 ioc->name, ii));
7830 }
7831 }
7832
7833 *evHandlers = handlers;
7834 return r;
7835 }
7836
7837 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7838 /**
7839 * mpt_fc_log_info - Log information returned from Fibre Channel IOC.
7840 * @ioc: Pointer to MPT_ADAPTER structure
7841 * @log_info: U32 LogInfo reply word from the IOC
7842 *
7843 * Refer to lsi/mpi_log_fc.h.
7844 */
7845 static void
mpt_fc_log_info(MPT_ADAPTER * ioc,u32 log_info)7846 mpt_fc_log_info(MPT_ADAPTER *ioc, u32 log_info)
7847 {
7848 char *desc = "unknown";
7849
7850 switch (log_info & 0xFF000000) {
7851 case MPI_IOCLOGINFO_FC_INIT_BASE:
7852 desc = "FCP Initiator";
7853 break;
7854 case MPI_IOCLOGINFO_FC_TARGET_BASE:
7855 desc = "FCP Target";
7856 break;
7857 case MPI_IOCLOGINFO_FC_LAN_BASE:
7858 desc = "LAN";
7859 break;
7860 case MPI_IOCLOGINFO_FC_MSG_BASE:
7861 desc = "MPI Message Layer";
7862 break;
7863 case MPI_IOCLOGINFO_FC_LINK_BASE:
7864 desc = "FC Link";
7865 break;
7866 case MPI_IOCLOGINFO_FC_CTX_BASE:
7867 desc = "Context Manager";
7868 break;
7869 case MPI_IOCLOGINFO_FC_INVALID_FIELD_BYTE_OFFSET:
7870 desc = "Invalid Field Offset";
7871 break;
7872 case MPI_IOCLOGINFO_FC_STATE_CHANGE:
7873 desc = "State Change Info";
7874 break;
7875 }
7876
7877 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubClass={%s}, Value=(0x%06x)\n",
7878 ioc->name, log_info, desc, (log_info & 0xFFFFFF));
7879 }
7880
7881 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
7882 /**
7883 * mpt_spi_log_info - Log information returned from SCSI Parallel IOC.
7884 * @ioc: Pointer to MPT_ADAPTER structure
7885 * @log_info: U32 LogInfo word from the IOC
7886 *
7887 * Refer to lsi/sp_log.h.
7888 */
7889 static void
mpt_spi_log_info(MPT_ADAPTER * ioc,u32 log_info)7890 mpt_spi_log_info(MPT_ADAPTER *ioc, u32 log_info)
7891 {
7892 u32 info = log_info & 0x00FF0000;
7893 char *desc = "unknown";
7894
7895 switch (info) {
7896 case 0x00010000:
7897 desc = "bug! MID not found";
7898 break;
7899
7900 case 0x00020000:
7901 desc = "Parity Error";
7902 break;
7903
7904 case 0x00030000:
7905 desc = "ASYNC Outbound Overrun";
7906 break;
7907
7908 case 0x00040000:
7909 desc = "SYNC Offset Error";
7910 break;
7911
7912 case 0x00050000:
7913 desc = "BM Change";
7914 break;
7915
7916 case 0x00060000:
7917 desc = "Msg In Overflow";
7918 break;
7919
7920 case 0x00070000:
7921 desc = "DMA Error";
7922 break;
7923
7924 case 0x00080000:
7925 desc = "Outbound DMA Overrun";
7926 break;
7927
7928 case 0x00090000:
7929 desc = "Task Management";
7930 break;
7931
7932 case 0x000A0000:
7933 desc = "Device Problem";
7934 break;
7935
7936 case 0x000B0000:
7937 desc = "Invalid Phase Change";
7938 break;
7939
7940 case 0x000C0000:
7941 desc = "Untagged Table Size";
7942 break;
7943
7944 }
7945
7946 printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc);
7947 }
7948
7949 /* strings for sas loginfo */
7950 static char *originator_str[] = {
7951 "IOP", /* 00h */
7952 "PL", /* 01h */
7953 "IR" /* 02h */
7954 };
7955 static char *iop_code_str[] = {
7956 NULL, /* 00h */
7957 "Invalid SAS Address", /* 01h */
7958 NULL, /* 02h */
7959 "Invalid Page", /* 03h */
7960 "Diag Message Error", /* 04h */
7961 "Task Terminated", /* 05h */
7962 "Enclosure Management", /* 06h */
7963 "Target Mode" /* 07h */
7964 };
7965 static char *pl_code_str[] = {
7966 NULL, /* 00h */
7967 "Open Failure", /* 01h */
7968 "Invalid Scatter Gather List", /* 02h */
7969 "Wrong Relative Offset or Frame Length", /* 03h */
7970 "Frame Transfer Error", /* 04h */
7971 "Transmit Frame Connected Low", /* 05h */
7972 "SATA Non-NCQ RW Error Bit Set", /* 06h */
7973 "SATA Read Log Receive Data Error", /* 07h */
7974 "SATA NCQ Fail All Commands After Error", /* 08h */
7975 "SATA Error in Receive Set Device Bit FIS", /* 09h */
7976 "Receive Frame Invalid Message", /* 0Ah */
7977 "Receive Context Message Valid Error", /* 0Bh */
7978 "Receive Frame Current Frame Error", /* 0Ch */
7979 "SATA Link Down", /* 0Dh */
7980 "Discovery SATA Init W IOS", /* 0Eh */
7981 "Config Invalid Page", /* 0Fh */
7982 "Discovery SATA Init Timeout", /* 10h */
7983 "Reset", /* 11h */
7984 "Abort", /* 12h */
7985 "IO Not Yet Executed", /* 13h */
7986 "IO Executed", /* 14h */
7987 "Persistent Reservation Out Not Affiliation "
7988 "Owner", /* 15h */
7989 "Open Transmit DMA Abort", /* 16h */
7990 "IO Device Missing Delay Retry", /* 17h */
7991 "IO Cancelled Due to Receive Error", /* 18h */
7992 NULL, /* 19h */
7993 NULL, /* 1Ah */
7994 NULL, /* 1Bh */
7995 NULL, /* 1Ch */
7996 NULL, /* 1Dh */
7997 NULL, /* 1Eh */
7998 NULL, /* 1Fh */
7999 "Enclosure Management" /* 20h */
8000 };
8001 static char *ir_code_str[] = {
8002 "Raid Action Error", /* 00h */
8003 NULL, /* 00h */
8004 NULL, /* 01h */
8005 NULL, /* 02h */
8006 NULL, /* 03h */
8007 NULL, /* 04h */
8008 NULL, /* 05h */
8009 NULL, /* 06h */
8010 NULL /* 07h */
8011 };
8012 static char *raid_sub_code_str[] = {
8013 NULL, /* 00h */
8014 "Volume Creation Failed: Data Passed too "
8015 "Large", /* 01h */
8016 "Volume Creation Failed: Duplicate Volumes "
8017 "Attempted", /* 02h */
8018 "Volume Creation Failed: Max Number "
8019 "Supported Volumes Exceeded", /* 03h */
8020 "Volume Creation Failed: DMA Error", /* 04h */
8021 "Volume Creation Failed: Invalid Volume Type", /* 05h */
8022 "Volume Creation Failed: Error Reading "
8023 "MFG Page 4", /* 06h */
8024 "Volume Creation Failed: Creating Internal "
8025 "Structures", /* 07h */
8026 NULL, /* 08h */
8027 NULL, /* 09h */
8028 NULL, /* 0Ah */
8029 NULL, /* 0Bh */
8030 NULL, /* 0Ch */
8031 NULL, /* 0Dh */
8032 NULL, /* 0Eh */
8033 NULL, /* 0Fh */
8034 "Activation failed: Already Active Volume", /* 10h */
8035 "Activation failed: Unsupported Volume Type", /* 11h */
8036 "Activation failed: Too Many Active Volumes", /* 12h */
8037 "Activation failed: Volume ID in Use", /* 13h */
8038 "Activation failed: Reported Failure", /* 14h */
8039 "Activation failed: Importing a Volume", /* 15h */
8040 NULL, /* 16h */
8041 NULL, /* 17h */
8042 NULL, /* 18h */
8043 NULL, /* 19h */
8044 NULL, /* 1Ah */
8045 NULL, /* 1Bh */
8046 NULL, /* 1Ch */
8047 NULL, /* 1Dh */
8048 NULL, /* 1Eh */
8049 NULL, /* 1Fh */
8050 "Phys Disk failed: Too Many Phys Disks", /* 20h */
8051 "Phys Disk failed: Data Passed too Large", /* 21h */
8052 "Phys Disk failed: DMA Error", /* 22h */
8053 "Phys Disk failed: Invalid <channel:id>", /* 23h */
8054 "Phys Disk failed: Creating Phys Disk Config "
8055 "Page", /* 24h */
8056 NULL, /* 25h */
8057 NULL, /* 26h */
8058 NULL, /* 27h */
8059 NULL, /* 28h */
8060 NULL, /* 29h */
8061 NULL, /* 2Ah */
8062 NULL, /* 2Bh */
8063 NULL, /* 2Ch */
8064 NULL, /* 2Dh */
8065 NULL, /* 2Eh */
8066 NULL, /* 2Fh */
8067 "Compatibility Error: IR Disabled", /* 30h */
8068 "Compatibility Error: Inquiry Command Failed", /* 31h */
8069 "Compatibility Error: Device not Direct Access "
8070 "Device ", /* 32h */
8071 "Compatibility Error: Removable Device Found", /* 33h */
8072 "Compatibility Error: Device SCSI Version not "
8073 "2 or Higher", /* 34h */
8074 "Compatibility Error: SATA Device, 48 BIT LBA "
8075 "not Supported", /* 35h */
8076 "Compatibility Error: Device doesn't have "
8077 "512 Byte Block Sizes", /* 36h */
8078 "Compatibility Error: Volume Type Check Failed", /* 37h */
8079 "Compatibility Error: Volume Type is "
8080 "Unsupported by FW", /* 38h */
8081 "Compatibility Error: Disk Drive too Small for "
8082 "use in Volume", /* 39h */
8083 "Compatibility Error: Phys Disk for Create "
8084 "Volume not Found", /* 3Ah */
8085 "Compatibility Error: Too Many or too Few "
8086 "Disks for Volume Type", /* 3Bh */
8087 "Compatibility Error: Disk stripe Sizes "
8088 "Must be 64KB", /* 3Ch */
8089 "Compatibility Error: IME Size Limited to < 2TB", /* 3Dh */
8090 };
8091
8092 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8093 /**
8094 * mpt_sas_log_info - Log information returned from SAS IOC.
8095 * @ioc: Pointer to MPT_ADAPTER structure
8096 * @log_info: U32 LogInfo reply word from the IOC
8097 * @cb_idx: callback function's handle
8098 *
8099 * Refer to lsi/mpi_log_sas.h.
8100 **/
8101 static void
mpt_sas_log_info(MPT_ADAPTER * ioc,u32 log_info,u8 cb_idx)8102 mpt_sas_log_info(MPT_ADAPTER *ioc, u32 log_info, u8 cb_idx)
8103 {
8104 union loginfo_type {
8105 u32 loginfo;
8106 struct {
8107 u32 subcode:16;
8108 u32 code:8;
8109 u32 originator:4;
8110 u32 bus_type:4;
8111 }dw;
8112 };
8113 union loginfo_type sas_loginfo;
8114 char *originator_desc = NULL;
8115 char *code_desc = NULL;
8116 char *sub_code_desc = NULL;
8117
8118 sas_loginfo.loginfo = log_info;
8119 if ((sas_loginfo.dw.bus_type != 3 /*SAS*/) &&
8120 (sas_loginfo.dw.originator < ARRAY_SIZE(originator_str)))
8121 return;
8122
8123 originator_desc = originator_str[sas_loginfo.dw.originator];
8124
8125 switch (sas_loginfo.dw.originator) {
8126
8127 case 0: /* IOP */
8128 if (sas_loginfo.dw.code <
8129 ARRAY_SIZE(iop_code_str))
8130 code_desc = iop_code_str[sas_loginfo.dw.code];
8131 break;
8132 case 1: /* PL */
8133 if (sas_loginfo.dw.code <
8134 ARRAY_SIZE(pl_code_str))
8135 code_desc = pl_code_str[sas_loginfo.dw.code];
8136 break;
8137 case 2: /* IR */
8138 if (sas_loginfo.dw.code >=
8139 ARRAY_SIZE(ir_code_str))
8140 break;
8141 code_desc = ir_code_str[sas_loginfo.dw.code];
8142 if (sas_loginfo.dw.subcode >=
8143 ARRAY_SIZE(raid_sub_code_str))
8144 break;
8145 if (sas_loginfo.dw.code == 0)
8146 sub_code_desc =
8147 raid_sub_code_str[sas_loginfo.dw.subcode];
8148 break;
8149 default:
8150 return;
8151 }
8152
8153 if (sub_code_desc != NULL)
8154 printk(MYIOC_s_INFO_FMT
8155 "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8156 " SubCode={%s} cb_idx %s\n",
8157 ioc->name, log_info, originator_desc, code_desc,
8158 sub_code_desc, MptCallbacksName[cb_idx]);
8159 else if (code_desc != NULL)
8160 printk(MYIOC_s_INFO_FMT
8161 "LogInfo(0x%08x): Originator={%s}, Code={%s},"
8162 " SubCode(0x%04x) cb_idx %s\n",
8163 ioc->name, log_info, originator_desc, code_desc,
8164 sas_loginfo.dw.subcode, MptCallbacksName[cb_idx]);
8165 else
8166 printk(MYIOC_s_INFO_FMT
8167 "LogInfo(0x%08x): Originator={%s}, Code=(0x%02x),"
8168 " SubCode(0x%04x) cb_idx %s\n",
8169 ioc->name, log_info, originator_desc,
8170 sas_loginfo.dw.code, sas_loginfo.dw.subcode,
8171 MptCallbacksName[cb_idx]);
8172 }
8173
8174 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8175 /**
8176 * mpt_iocstatus_info_config - IOCSTATUS information for config pages
8177 * @ioc: Pointer to MPT_ADAPTER structure
8178 * @ioc_status: U32 IOCStatus word from IOC
8179 * @mf: Pointer to MPT request frame
8180 *
8181 * Refer to lsi/mpi.h.
8182 **/
8183 static void
mpt_iocstatus_info_config(MPT_ADAPTER * ioc,u32 ioc_status,MPT_FRAME_HDR * mf)8184 mpt_iocstatus_info_config(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8185 {
8186 Config_t *pReq = (Config_t *)mf;
8187 char extend_desc[EVENT_DESCR_STR_SZ];
8188 char *desc = NULL;
8189 u32 form;
8190 u8 page_type;
8191
8192 if (pReq->Header.PageType == MPI_CONFIG_PAGETYPE_EXTENDED)
8193 page_type = pReq->ExtPageType;
8194 else
8195 page_type = pReq->Header.PageType;
8196
8197 /*
8198 * ignore invalid page messages for GET_NEXT_HANDLE
8199 */
8200 form = le32_to_cpu(pReq->PageAddress);
8201 if (ioc_status == MPI_IOCSTATUS_CONFIG_INVALID_PAGE) {
8202 if (page_type == MPI_CONFIG_EXTPAGETYPE_SAS_DEVICE ||
8203 page_type == MPI_CONFIG_EXTPAGETYPE_SAS_EXPANDER ||
8204 page_type == MPI_CONFIG_EXTPAGETYPE_ENCLOSURE) {
8205 if ((form >> MPI_SAS_DEVICE_PGAD_FORM_SHIFT) ==
8206 MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE)
8207 return;
8208 }
8209 if (page_type == MPI_CONFIG_PAGETYPE_FC_DEVICE)
8210 if ((form & MPI_FC_DEVICE_PGAD_FORM_MASK) ==
8211 MPI_FC_DEVICE_PGAD_FORM_NEXT_DID)
8212 return;
8213 }
8214
8215 snprintf(extend_desc, EVENT_DESCR_STR_SZ,
8216 "type=%02Xh, page=%02Xh, action=%02Xh, form=%08Xh",
8217 page_type, pReq->Header.PageNumber, pReq->Action, form);
8218
8219 switch (ioc_status) {
8220
8221 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8222 desc = "Config Page Invalid Action";
8223 break;
8224
8225 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
8226 desc = "Config Page Invalid Type";
8227 break;
8228
8229 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
8230 desc = "Config Page Invalid Page";
8231 break;
8232
8233 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
8234 desc = "Config Page Invalid Data";
8235 break;
8236
8237 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
8238 desc = "Config Page No Defaults";
8239 break;
8240
8241 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
8242 desc = "Config Page Can't Commit";
8243 break;
8244 }
8245
8246 if (!desc)
8247 return;
8248
8249 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s: %s\n",
8250 ioc->name, ioc_status, desc, extend_desc));
8251 }
8252
8253 /**
8254 * mpt_iocstatus_info - IOCSTATUS information returned from IOC.
8255 * @ioc: Pointer to MPT_ADAPTER structure
8256 * @ioc_status: U32 IOCStatus word from IOC
8257 * @mf: Pointer to MPT request frame
8258 *
8259 * Refer to lsi/mpi.h.
8260 **/
8261 static void
mpt_iocstatus_info(MPT_ADAPTER * ioc,u32 ioc_status,MPT_FRAME_HDR * mf)8262 mpt_iocstatus_info(MPT_ADAPTER *ioc, u32 ioc_status, MPT_FRAME_HDR *mf)
8263 {
8264 u32 status = ioc_status & MPI_IOCSTATUS_MASK;
8265 char *desc = NULL;
8266
8267 switch (status) {
8268
8269 /****************************************************************************/
8270 /* Common IOCStatus values for all replies */
8271 /****************************************************************************/
8272
8273 case MPI_IOCSTATUS_INVALID_FUNCTION: /* 0x0001 */
8274 desc = "Invalid Function";
8275 break;
8276
8277 case MPI_IOCSTATUS_BUSY: /* 0x0002 */
8278 desc = "Busy";
8279 break;
8280
8281 case MPI_IOCSTATUS_INVALID_SGL: /* 0x0003 */
8282 desc = "Invalid SGL";
8283 break;
8284
8285 case MPI_IOCSTATUS_INTERNAL_ERROR: /* 0x0004 */
8286 desc = "Internal Error";
8287 break;
8288
8289 case MPI_IOCSTATUS_RESERVED: /* 0x0005 */
8290 desc = "Reserved";
8291 break;
8292
8293 case MPI_IOCSTATUS_INSUFFICIENT_RESOURCES: /* 0x0006 */
8294 desc = "Insufficient Resources";
8295 break;
8296
8297 case MPI_IOCSTATUS_INVALID_FIELD: /* 0x0007 */
8298 desc = "Invalid Field";
8299 break;
8300
8301 case MPI_IOCSTATUS_INVALID_STATE: /* 0x0008 */
8302 desc = "Invalid State";
8303 break;
8304
8305 /****************************************************************************/
8306 /* Config IOCStatus values */
8307 /****************************************************************************/
8308
8309 case MPI_IOCSTATUS_CONFIG_INVALID_ACTION: /* 0x0020 */
8310 case MPI_IOCSTATUS_CONFIG_INVALID_TYPE: /* 0x0021 */
8311 case MPI_IOCSTATUS_CONFIG_INVALID_PAGE: /* 0x0022 */
8312 case MPI_IOCSTATUS_CONFIG_INVALID_DATA: /* 0x0023 */
8313 case MPI_IOCSTATUS_CONFIG_NO_DEFAULTS: /* 0x0024 */
8314 case MPI_IOCSTATUS_CONFIG_CANT_COMMIT: /* 0x0025 */
8315 mpt_iocstatus_info_config(ioc, status, mf);
8316 break;
8317
8318 /****************************************************************************/
8319 /* SCSIIO Reply (SPI, FCP, SAS) initiator values */
8320 /* */
8321 /* Look at mptscsih_iocstatus_info_scsiio in mptscsih.c */
8322 /* */
8323 /****************************************************************************/
8324
8325 case MPI_IOCSTATUS_SCSI_RECOVERED_ERROR: /* 0x0040 */
8326 case MPI_IOCSTATUS_SCSI_DATA_UNDERRUN: /* 0x0045 */
8327 case MPI_IOCSTATUS_SCSI_INVALID_BUS: /* 0x0041 */
8328 case MPI_IOCSTATUS_SCSI_INVALID_TARGETID: /* 0x0042 */
8329 case MPI_IOCSTATUS_SCSI_DEVICE_NOT_THERE: /* 0x0043 */
8330 case MPI_IOCSTATUS_SCSI_DATA_OVERRUN: /* 0x0044 */
8331 case MPI_IOCSTATUS_SCSI_IO_DATA_ERROR: /* 0x0046 */
8332 case MPI_IOCSTATUS_SCSI_PROTOCOL_ERROR: /* 0x0047 */
8333 case MPI_IOCSTATUS_SCSI_TASK_TERMINATED: /* 0x0048 */
8334 case MPI_IOCSTATUS_SCSI_RESIDUAL_MISMATCH: /* 0x0049 */
8335 case MPI_IOCSTATUS_SCSI_TASK_MGMT_FAILED: /* 0x004A */
8336 case MPI_IOCSTATUS_SCSI_IOC_TERMINATED: /* 0x004B */
8337 case MPI_IOCSTATUS_SCSI_EXT_TERMINATED: /* 0x004C */
8338 break;
8339
8340 /****************************************************************************/
8341 /* SCSI Target values */
8342 /****************************************************************************/
8343
8344 case MPI_IOCSTATUS_TARGET_PRIORITY_IO: /* 0x0060 */
8345 desc = "Target: Priority IO";
8346 break;
8347
8348 case MPI_IOCSTATUS_TARGET_INVALID_PORT: /* 0x0061 */
8349 desc = "Target: Invalid Port";
8350 break;
8351
8352 case MPI_IOCSTATUS_TARGET_INVALID_IO_INDEX: /* 0x0062 */
8353 desc = "Target Invalid IO Index:";
8354 break;
8355
8356 case MPI_IOCSTATUS_TARGET_ABORTED: /* 0x0063 */
8357 desc = "Target: Aborted";
8358 break;
8359
8360 case MPI_IOCSTATUS_TARGET_NO_CONN_RETRYABLE: /* 0x0064 */
8361 desc = "Target: No Conn Retryable";
8362 break;
8363
8364 case MPI_IOCSTATUS_TARGET_NO_CONNECTION: /* 0x0065 */
8365 desc = "Target: No Connection";
8366 break;
8367
8368 case MPI_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH: /* 0x006A */
8369 desc = "Target: Transfer Count Mismatch";
8370 break;
8371
8372 case MPI_IOCSTATUS_TARGET_STS_DATA_NOT_SENT: /* 0x006B */
8373 desc = "Target: STS Data not Sent";
8374 break;
8375
8376 case MPI_IOCSTATUS_TARGET_DATA_OFFSET_ERROR: /* 0x006D */
8377 desc = "Target: Data Offset Error";
8378 break;
8379
8380 case MPI_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA: /* 0x006E */
8381 desc = "Target: Too Much Write Data";
8382 break;
8383
8384 case MPI_IOCSTATUS_TARGET_IU_TOO_SHORT: /* 0x006F */
8385 desc = "Target: IU Too Short";
8386 break;
8387
8388 case MPI_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT: /* 0x0070 */
8389 desc = "Target: ACK NAK Timeout";
8390 break;
8391
8392 case MPI_IOCSTATUS_TARGET_NAK_RECEIVED: /* 0x0071 */
8393 desc = "Target: Nak Received";
8394 break;
8395
8396 /****************************************************************************/
8397 /* Fibre Channel Direct Access values */
8398 /****************************************************************************/
8399
8400 case MPI_IOCSTATUS_FC_ABORTED: /* 0x0066 */
8401 desc = "FC: Aborted";
8402 break;
8403
8404 case MPI_IOCSTATUS_FC_RX_ID_INVALID: /* 0x0067 */
8405 desc = "FC: RX ID Invalid";
8406 break;
8407
8408 case MPI_IOCSTATUS_FC_DID_INVALID: /* 0x0068 */
8409 desc = "FC: DID Invalid";
8410 break;
8411
8412 case MPI_IOCSTATUS_FC_NODE_LOGGED_OUT: /* 0x0069 */
8413 desc = "FC: Node Logged Out";
8414 break;
8415
8416 case MPI_IOCSTATUS_FC_EXCHANGE_CANCELED: /* 0x006C */
8417 desc = "FC: Exchange Canceled";
8418 break;
8419
8420 /****************************************************************************/
8421 /* LAN values */
8422 /****************************************************************************/
8423
8424 case MPI_IOCSTATUS_LAN_DEVICE_NOT_FOUND: /* 0x0080 */
8425 desc = "LAN: Device not Found";
8426 break;
8427
8428 case MPI_IOCSTATUS_LAN_DEVICE_FAILURE: /* 0x0081 */
8429 desc = "LAN: Device Failure";
8430 break;
8431
8432 case MPI_IOCSTATUS_LAN_TRANSMIT_ERROR: /* 0x0082 */
8433 desc = "LAN: Transmit Error";
8434 break;
8435
8436 case MPI_IOCSTATUS_LAN_TRANSMIT_ABORTED: /* 0x0083 */
8437 desc = "LAN: Transmit Aborted";
8438 break;
8439
8440 case MPI_IOCSTATUS_LAN_RECEIVE_ERROR: /* 0x0084 */
8441 desc = "LAN: Receive Error";
8442 break;
8443
8444 case MPI_IOCSTATUS_LAN_RECEIVE_ABORTED: /* 0x0085 */
8445 desc = "LAN: Receive Aborted";
8446 break;
8447
8448 case MPI_IOCSTATUS_LAN_PARTIAL_PACKET: /* 0x0086 */
8449 desc = "LAN: Partial Packet";
8450 break;
8451
8452 case MPI_IOCSTATUS_LAN_CANCELED: /* 0x0087 */
8453 desc = "LAN: Canceled";
8454 break;
8455
8456 /****************************************************************************/
8457 /* Serial Attached SCSI values */
8458 /****************************************************************************/
8459
8460 case MPI_IOCSTATUS_SAS_SMP_REQUEST_FAILED: /* 0x0090 */
8461 desc = "SAS: SMP Request Failed";
8462 break;
8463
8464 case MPI_IOCSTATUS_SAS_SMP_DATA_OVERRUN: /* 0x0090 */
8465 desc = "SAS: SMP Data Overrun";
8466 break;
8467
8468 default:
8469 desc = "Others";
8470 break;
8471 }
8472
8473 if (!desc)
8474 return;
8475
8476 dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s\n",
8477 ioc->name, status, desc));
8478 }
8479
8480 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8481 EXPORT_SYMBOL(mpt_attach);
8482 EXPORT_SYMBOL(mpt_detach);
8483 #ifdef CONFIG_PM
8484 EXPORT_SYMBOL(mpt_resume);
8485 EXPORT_SYMBOL(mpt_suspend);
8486 #endif
8487 EXPORT_SYMBOL(ioc_list);
8488 EXPORT_SYMBOL(mpt_register);
8489 EXPORT_SYMBOL(mpt_deregister);
8490 EXPORT_SYMBOL(mpt_event_register);
8491 EXPORT_SYMBOL(mpt_event_deregister);
8492 EXPORT_SYMBOL(mpt_reset_register);
8493 EXPORT_SYMBOL(mpt_reset_deregister);
8494 EXPORT_SYMBOL(mpt_device_driver_register);
8495 EXPORT_SYMBOL(mpt_device_driver_deregister);
8496 EXPORT_SYMBOL(mpt_get_msg_frame);
8497 EXPORT_SYMBOL(mpt_put_msg_frame);
8498 EXPORT_SYMBOL(mpt_put_msg_frame_hi_pri);
8499 EXPORT_SYMBOL(mpt_free_msg_frame);
8500 EXPORT_SYMBOL(mpt_send_handshake_request);
8501 EXPORT_SYMBOL(mpt_verify_adapter);
8502 EXPORT_SYMBOL(mpt_GetIocState);
8503 EXPORT_SYMBOL(mpt_print_ioc_summary);
8504 EXPORT_SYMBOL(mpt_HardResetHandler);
8505 EXPORT_SYMBOL(mpt_config);
8506 EXPORT_SYMBOL(mpt_findImVolumes);
8507 EXPORT_SYMBOL(mpt_alloc_fw_memory);
8508 EXPORT_SYMBOL(mpt_free_fw_memory);
8509 EXPORT_SYMBOL(mptbase_sas_persist_operation);
8510 EXPORT_SYMBOL(mpt_raid_phys_disk_pg0);
8511
8512 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8513 /**
8514 * fusion_init - Fusion MPT base driver initialization routine.
8515 *
8516 * Returns 0 for success, non-zero for failure.
8517 */
8518 static int __init
fusion_init(void)8519 fusion_init(void)
8520 {
8521 u8 cb_idx;
8522
8523 show_mptmod_ver(my_NAME, my_VERSION);
8524 printk(KERN_INFO COPYRIGHT "\n");
8525
8526 for (cb_idx = 0; cb_idx < MPT_MAX_PROTOCOL_DRIVERS; cb_idx++) {
8527 MptCallbacks[cb_idx] = NULL;
8528 MptDriverClass[cb_idx] = MPTUNKNOWN_DRIVER;
8529 MptEvHandlers[cb_idx] = NULL;
8530 MptResetHandlers[cb_idx] = NULL;
8531 }
8532
8533 /* Register ourselves (mptbase) in order to facilitate
8534 * EventNotification handling.
8535 */
8536 mpt_base_index = mpt_register(mptbase_reply, MPTBASE_DRIVER,
8537 "mptbase_reply");
8538
8539 /* Register for hard reset handling callbacks.
8540 */
8541 mpt_reset_register(mpt_base_index, mpt_ioc_reset);
8542
8543 #ifdef CONFIG_PROC_FS
8544 (void) procmpt_create();
8545 #endif
8546 return 0;
8547 }
8548
8549 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
8550 /**
8551 * fusion_exit - Perform driver unload cleanup.
8552 *
8553 * This routine frees all resources associated with each MPT adapter
8554 * and removes all %MPT_PROCFS_MPTBASEDIR entries.
8555 */
8556 static void __exit
fusion_exit(void)8557 fusion_exit(void)
8558 {
8559
8560 mpt_reset_deregister(mpt_base_index);
8561
8562 #ifdef CONFIG_PROC_FS
8563 procmpt_destroy();
8564 #endif
8565 }
8566
8567 module_init(fusion_init);
8568 module_exit(fusion_exit);
8569