• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1  /***************************************************************************
2  *
3  * Copyright (C) 2007-2010 SMSC
4  *
5  * This program is free software; you can redistribute it and/or
6  * modify it under the terms of the GNU General Public License
7  * as published by the Free Software Foundation; either version 2
8  * of the License, or (at your option) any later version.
9  *
10  * This program is distributed in the hope that it will be useful,
11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  * GNU General Public License for more details.
14  *
15  * You should have received a copy of the GNU General Public License
16  * along with this program; if not, write to the Free Software
17  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
18  *
19  *****************************************************************************/
20 
21 #include <linux/module.h>
22 #include <linux/kmod.h>
23 #include <linux/init.h>
24 #include <linux/netdevice.h>
25 #include <linux/etherdevice.h>
26 #include <linux/ethtool.h>
27 #include <linux/mii.h>
28 #include <linux/usb.h>
29 #include <linux/crc32.h>
30 #include <linux/usb/usbnet.h>
31 #include <linux/slab.h>
32 #include "smsc75xx.h"
33 
34 #define SMSC_CHIPNAME			"smsc75xx"
35 #define SMSC_DRIVER_VERSION		"1.0.0"
36 #define HS_USB_PKT_SIZE			(512)
37 #define FS_USB_PKT_SIZE			(64)
38 #define DEFAULT_HS_BURST_CAP_SIZE	(16 * 1024 + 5 * HS_USB_PKT_SIZE)
39 #define DEFAULT_FS_BURST_CAP_SIZE	(6 * 1024 + 33 * FS_USB_PKT_SIZE)
40 #define DEFAULT_BULK_IN_DELAY		(0x00002000)
41 #define MAX_SINGLE_PACKET_SIZE		(9000)
42 #define LAN75XX_EEPROM_MAGIC		(0x7500)
43 #define EEPROM_MAC_OFFSET		(0x01)
44 #define DEFAULT_TX_CSUM_ENABLE		(true)
45 #define DEFAULT_RX_CSUM_ENABLE		(true)
46 #define SMSC75XX_INTERNAL_PHY_ID	(1)
47 #define SMSC75XX_TX_OVERHEAD		(8)
48 #define MAX_RX_FIFO_SIZE		(20 * 1024)
49 #define MAX_TX_FIFO_SIZE		(12 * 1024)
50 #define USB_VENDOR_ID_SMSC		(0x0424)
51 #define USB_PRODUCT_ID_LAN7500		(0x7500)
52 #define USB_PRODUCT_ID_LAN7505		(0x7505)
53 #define RXW_PADDING			2
54 
55 #define check_warn(ret, fmt, args...) \
56 	({ if (ret < 0) netdev_warn(dev->net, fmt, ##args); })
57 
58 #define check_warn_return(ret, fmt, args...) \
59 	({ if (ret < 0) { netdev_warn(dev->net, fmt, ##args); return ret; } })
60 
61 #define check_warn_goto_done(ret, fmt, args...) \
62 	({ if (ret < 0) { netdev_warn(dev->net, fmt, ##args); goto done; } })
63 
64 struct smsc75xx_priv {
65 	struct usbnet *dev;
66 	u32 rfe_ctl;
67 	u32 multicast_hash_table[DP_SEL_VHF_HASH_LEN];
68 	struct mutex dataport_mutex;
69 	spinlock_t rfe_ctl_lock;
70 	struct work_struct set_multicast;
71 };
72 
73 struct usb_context {
74 	struct usb_ctrlrequest req;
75 	struct usbnet *dev;
76 };
77 
78 static bool turbo_mode = true;
79 module_param(turbo_mode, bool, 0644);
80 MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction");
81 
smsc75xx_read_reg(struct usbnet * dev,u32 index,u32 * data)82 static int __must_check smsc75xx_read_reg(struct usbnet *dev, u32 index,
83 					  u32 *data)
84 {
85 	u32 *buf = kmalloc(4, GFP_KERNEL);
86 	int ret;
87 
88 	BUG_ON(!dev);
89 
90 	if (!buf)
91 		return -ENOMEM;
92 
93 	ret = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0),
94 		USB_VENDOR_REQUEST_READ_REGISTER,
95 		USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
96 		00, index, buf, 4, USB_CTRL_GET_TIMEOUT);
97 
98 	if (unlikely(ret < 0))
99 		netdev_warn(dev->net,
100 			"Failed to read reg index 0x%08x: %d", index, ret);
101 
102 	le32_to_cpus(buf);
103 	*data = *buf;
104 	kfree(buf);
105 
106 	return ret;
107 }
108 
smsc75xx_write_reg(struct usbnet * dev,u32 index,u32 data)109 static int __must_check smsc75xx_write_reg(struct usbnet *dev, u32 index,
110 					   u32 data)
111 {
112 	u32 *buf = kmalloc(4, GFP_KERNEL);
113 	int ret;
114 
115 	BUG_ON(!dev);
116 
117 	if (!buf)
118 		return -ENOMEM;
119 
120 	*buf = data;
121 	cpu_to_le32s(buf);
122 
123 	ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
124 		USB_VENDOR_REQUEST_WRITE_REGISTER,
125 		USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
126 		00, index, buf, 4, USB_CTRL_SET_TIMEOUT);
127 
128 	if (unlikely(ret < 0))
129 		netdev_warn(dev->net,
130 			"Failed to write reg index 0x%08x: %d", index, ret);
131 
132 	kfree(buf);
133 
134 	return ret;
135 }
136 
137 /* Loop until the read is completed with timeout
138  * called with phy_mutex held */
smsc75xx_phy_wait_not_busy(struct usbnet * dev)139 static int smsc75xx_phy_wait_not_busy(struct usbnet *dev)
140 {
141 	unsigned long start_time = jiffies;
142 	u32 val;
143 	int ret;
144 
145 	do {
146 		ret = smsc75xx_read_reg(dev, MII_ACCESS, &val);
147 		check_warn_return(ret, "Error reading MII_ACCESS");
148 
149 		if (!(val & MII_ACCESS_BUSY))
150 			return 0;
151 	} while (!time_after(jiffies, start_time + HZ));
152 
153 	return -EIO;
154 }
155 
smsc75xx_mdio_read(struct net_device * netdev,int phy_id,int idx)156 static int smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx)
157 {
158 	struct usbnet *dev = netdev_priv(netdev);
159 	u32 val, addr;
160 	int ret;
161 
162 	mutex_lock(&dev->phy_mutex);
163 
164 	/* confirm MII not busy */
165 	ret = smsc75xx_phy_wait_not_busy(dev);
166 	check_warn_goto_done(ret, "MII is busy in smsc75xx_mdio_read");
167 
168 	/* set the address, index & direction (read from PHY) */
169 	phy_id &= dev->mii.phy_id_mask;
170 	idx &= dev->mii.reg_num_mask;
171 	addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR)
172 		| ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
173 		| MII_ACCESS_READ | MII_ACCESS_BUSY;
174 	ret = smsc75xx_write_reg(dev, MII_ACCESS, addr);
175 	check_warn_goto_done(ret, "Error writing MII_ACCESS");
176 
177 	ret = smsc75xx_phy_wait_not_busy(dev);
178 	check_warn_goto_done(ret, "Timed out reading MII reg %02X", idx);
179 
180 	ret = smsc75xx_read_reg(dev, MII_DATA, &val);
181 	check_warn_goto_done(ret, "Error reading MII_DATA");
182 
183 	ret = (u16)(val & 0xFFFF);
184 
185 done:
186 	mutex_unlock(&dev->phy_mutex);
187 	return ret;
188 }
189 
smsc75xx_mdio_write(struct net_device * netdev,int phy_id,int idx,int regval)190 static void smsc75xx_mdio_write(struct net_device *netdev, int phy_id, int idx,
191 				int regval)
192 {
193 	struct usbnet *dev = netdev_priv(netdev);
194 	u32 val, addr;
195 	int ret;
196 
197 	mutex_lock(&dev->phy_mutex);
198 
199 	/* confirm MII not busy */
200 	ret = smsc75xx_phy_wait_not_busy(dev);
201 	check_warn_goto_done(ret, "MII is busy in smsc75xx_mdio_write");
202 
203 	val = regval;
204 	ret = smsc75xx_write_reg(dev, MII_DATA, val);
205 	check_warn_goto_done(ret, "Error writing MII_DATA");
206 
207 	/* set the address, index & direction (write to PHY) */
208 	phy_id &= dev->mii.phy_id_mask;
209 	idx &= dev->mii.reg_num_mask;
210 	addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR)
211 		| ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR)
212 		| MII_ACCESS_WRITE | MII_ACCESS_BUSY;
213 	ret = smsc75xx_write_reg(dev, MII_ACCESS, addr);
214 	check_warn_goto_done(ret, "Error writing MII_ACCESS");
215 
216 	ret = smsc75xx_phy_wait_not_busy(dev);
217 	check_warn_goto_done(ret, "Timed out writing MII reg %02X", idx);
218 
219 done:
220 	mutex_unlock(&dev->phy_mutex);
221 }
222 
smsc75xx_wait_eeprom(struct usbnet * dev)223 static int smsc75xx_wait_eeprom(struct usbnet *dev)
224 {
225 	unsigned long start_time = jiffies;
226 	u32 val;
227 	int ret;
228 
229 	do {
230 		ret = smsc75xx_read_reg(dev, E2P_CMD, &val);
231 		check_warn_return(ret, "Error reading E2P_CMD");
232 
233 		if (!(val & E2P_CMD_BUSY) || (val & E2P_CMD_TIMEOUT))
234 			break;
235 		udelay(40);
236 	} while (!time_after(jiffies, start_time + HZ));
237 
238 	if (val & (E2P_CMD_TIMEOUT | E2P_CMD_BUSY)) {
239 		netdev_warn(dev->net, "EEPROM read operation timeout");
240 		return -EIO;
241 	}
242 
243 	return 0;
244 }
245 
smsc75xx_eeprom_confirm_not_busy(struct usbnet * dev)246 static int smsc75xx_eeprom_confirm_not_busy(struct usbnet *dev)
247 {
248 	unsigned long start_time = jiffies;
249 	u32 val;
250 	int ret;
251 
252 	do {
253 		ret = smsc75xx_read_reg(dev, E2P_CMD, &val);
254 		check_warn_return(ret, "Error reading E2P_CMD");
255 
256 		if (!(val & E2P_CMD_BUSY))
257 			return 0;
258 
259 		udelay(40);
260 	} while (!time_after(jiffies, start_time + HZ));
261 
262 	netdev_warn(dev->net, "EEPROM is busy");
263 	return -EIO;
264 }
265 
smsc75xx_read_eeprom(struct usbnet * dev,u32 offset,u32 length,u8 * data)266 static int smsc75xx_read_eeprom(struct usbnet *dev, u32 offset, u32 length,
267 				u8 *data)
268 {
269 	u32 val;
270 	int i, ret;
271 
272 	BUG_ON(!dev);
273 	BUG_ON(!data);
274 
275 	ret = smsc75xx_eeprom_confirm_not_busy(dev);
276 	if (ret)
277 		return ret;
278 
279 	for (i = 0; i < length; i++) {
280 		val = E2P_CMD_BUSY | E2P_CMD_READ | (offset & E2P_CMD_ADDR);
281 		ret = smsc75xx_write_reg(dev, E2P_CMD, val);
282 		check_warn_return(ret, "Error writing E2P_CMD");
283 
284 		ret = smsc75xx_wait_eeprom(dev);
285 		if (ret < 0)
286 			return ret;
287 
288 		ret = smsc75xx_read_reg(dev, E2P_DATA, &val);
289 		check_warn_return(ret, "Error reading E2P_DATA");
290 
291 		data[i] = val & 0xFF;
292 		offset++;
293 	}
294 
295 	return 0;
296 }
297 
smsc75xx_write_eeprom(struct usbnet * dev,u32 offset,u32 length,u8 * data)298 static int smsc75xx_write_eeprom(struct usbnet *dev, u32 offset, u32 length,
299 				 u8 *data)
300 {
301 	u32 val;
302 	int i, ret;
303 
304 	BUG_ON(!dev);
305 	BUG_ON(!data);
306 
307 	ret = smsc75xx_eeprom_confirm_not_busy(dev);
308 	if (ret)
309 		return ret;
310 
311 	/* Issue write/erase enable command */
312 	val = E2P_CMD_BUSY | E2P_CMD_EWEN;
313 	ret = smsc75xx_write_reg(dev, E2P_CMD, val);
314 	check_warn_return(ret, "Error writing E2P_CMD");
315 
316 	ret = smsc75xx_wait_eeprom(dev);
317 	if (ret < 0)
318 		return ret;
319 
320 	for (i = 0; i < length; i++) {
321 
322 		/* Fill data register */
323 		val = data[i];
324 		ret = smsc75xx_write_reg(dev, E2P_DATA, val);
325 		check_warn_return(ret, "Error writing E2P_DATA");
326 
327 		/* Send "write" command */
328 		val = E2P_CMD_BUSY | E2P_CMD_WRITE | (offset & E2P_CMD_ADDR);
329 		ret = smsc75xx_write_reg(dev, E2P_CMD, val);
330 		check_warn_return(ret, "Error writing E2P_CMD");
331 
332 		ret = smsc75xx_wait_eeprom(dev);
333 		if (ret < 0)
334 			return ret;
335 
336 		offset++;
337 	}
338 
339 	return 0;
340 }
341 
smsc75xx_dataport_wait_not_busy(struct usbnet * dev)342 static int smsc75xx_dataport_wait_not_busy(struct usbnet *dev)
343 {
344 	int i, ret;
345 
346 	for (i = 0; i < 100; i++) {
347 		u32 dp_sel;
348 		ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel);
349 		check_warn_return(ret, "Error reading DP_SEL");
350 
351 		if (dp_sel & DP_SEL_DPRDY)
352 			return 0;
353 
354 		udelay(40);
355 	}
356 
357 	netdev_warn(dev->net, "smsc75xx_dataport_wait_not_busy timed out");
358 
359 	return -EIO;
360 }
361 
smsc75xx_dataport_write(struct usbnet * dev,u32 ram_select,u32 addr,u32 length,u32 * buf)362 static int smsc75xx_dataport_write(struct usbnet *dev, u32 ram_select, u32 addr,
363 				   u32 length, u32 *buf)
364 {
365 	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
366 	u32 dp_sel;
367 	int i, ret;
368 
369 	mutex_lock(&pdata->dataport_mutex);
370 
371 	ret = smsc75xx_dataport_wait_not_busy(dev);
372 	check_warn_goto_done(ret, "smsc75xx_dataport_write busy on entry");
373 
374 	ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel);
375 	check_warn_goto_done(ret, "Error reading DP_SEL");
376 
377 	dp_sel &= ~DP_SEL_RSEL;
378 	dp_sel |= ram_select;
379 	ret = smsc75xx_write_reg(dev, DP_SEL, dp_sel);
380 	check_warn_goto_done(ret, "Error writing DP_SEL");
381 
382 	for (i = 0; i < length; i++) {
383 		ret = smsc75xx_write_reg(dev, DP_ADDR, addr + i);
384 		check_warn_goto_done(ret, "Error writing DP_ADDR");
385 
386 		ret = smsc75xx_write_reg(dev, DP_DATA, buf[i]);
387 		check_warn_goto_done(ret, "Error writing DP_DATA");
388 
389 		ret = smsc75xx_write_reg(dev, DP_CMD, DP_CMD_WRITE);
390 		check_warn_goto_done(ret, "Error writing DP_CMD");
391 
392 		ret = smsc75xx_dataport_wait_not_busy(dev);
393 		check_warn_goto_done(ret, "smsc75xx_dataport_write timeout");
394 	}
395 
396 done:
397 	mutex_unlock(&pdata->dataport_mutex);
398 	return ret;
399 }
400 
401 /* returns hash bit number for given MAC address */
smsc75xx_hash(char addr[ETH_ALEN])402 static u32 smsc75xx_hash(char addr[ETH_ALEN])
403 {
404 	return (ether_crc(ETH_ALEN, addr) >> 23) & 0x1ff;
405 }
406 
smsc75xx_deferred_multicast_write(struct work_struct * param)407 static void smsc75xx_deferred_multicast_write(struct work_struct *param)
408 {
409 	struct smsc75xx_priv *pdata =
410 		container_of(param, struct smsc75xx_priv, set_multicast);
411 	struct usbnet *dev = pdata->dev;
412 	int ret;
413 
414 	netif_dbg(dev, drv, dev->net, "deferred multicast write 0x%08x",
415 		pdata->rfe_ctl);
416 
417 	smsc75xx_dataport_write(dev, DP_SEL_VHF, DP_SEL_VHF_VLAN_LEN,
418 		DP_SEL_VHF_HASH_LEN, pdata->multicast_hash_table);
419 
420 	ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
421 	check_warn(ret, "Error writing RFE_CRL");
422 }
423 
smsc75xx_set_multicast(struct net_device * netdev)424 static void smsc75xx_set_multicast(struct net_device *netdev)
425 {
426 	struct usbnet *dev = netdev_priv(netdev);
427 	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
428 	unsigned long flags;
429 	int i;
430 
431 	spin_lock_irqsave(&pdata->rfe_ctl_lock, flags);
432 
433 	pdata->rfe_ctl &=
434 		~(RFE_CTL_AU | RFE_CTL_AM | RFE_CTL_DPF | RFE_CTL_MHF);
435 	pdata->rfe_ctl |= RFE_CTL_AB;
436 
437 	for (i = 0; i < DP_SEL_VHF_HASH_LEN; i++)
438 		pdata->multicast_hash_table[i] = 0;
439 
440 	if (dev->net->flags & IFF_PROMISC) {
441 		netif_dbg(dev, drv, dev->net, "promiscuous mode enabled");
442 		pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_AU;
443 	} else if (dev->net->flags & IFF_ALLMULTI) {
444 		netif_dbg(dev, drv, dev->net, "receive all multicast enabled");
445 		pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_DPF;
446 	} else if (!netdev_mc_empty(dev->net)) {
447 		struct netdev_hw_addr *ha;
448 
449 		netif_dbg(dev, drv, dev->net, "receive multicast hash filter");
450 
451 		pdata->rfe_ctl |= RFE_CTL_MHF | RFE_CTL_DPF;
452 
453 		netdev_for_each_mc_addr(ha, netdev) {
454 			u32 bitnum = smsc75xx_hash(ha->addr);
455 			pdata->multicast_hash_table[bitnum / 32] |=
456 				(1 << (bitnum % 32));
457 		}
458 	} else {
459 		netif_dbg(dev, drv, dev->net, "receive own packets only");
460 		pdata->rfe_ctl |= RFE_CTL_DPF;
461 	}
462 
463 	spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags);
464 
465 	/* defer register writes to a sleepable context */
466 	schedule_work(&pdata->set_multicast);
467 }
468 
smsc75xx_update_flowcontrol(struct usbnet * dev,u8 duplex,u16 lcladv,u16 rmtadv)469 static int smsc75xx_update_flowcontrol(struct usbnet *dev, u8 duplex,
470 					    u16 lcladv, u16 rmtadv)
471 {
472 	u32 flow = 0, fct_flow = 0;
473 	int ret;
474 
475 	if (duplex == DUPLEX_FULL) {
476 		u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv);
477 
478 		if (cap & FLOW_CTRL_TX) {
479 			flow = (FLOW_TX_FCEN | 0xFFFF);
480 			/* set fct_flow thresholds to 20% and 80% */
481 			fct_flow = (8 << 8) | 32;
482 		}
483 
484 		if (cap & FLOW_CTRL_RX)
485 			flow |= FLOW_RX_FCEN;
486 
487 		netif_dbg(dev, link, dev->net, "rx pause %s, tx pause %s",
488 			(cap & FLOW_CTRL_RX ? "enabled" : "disabled"),
489 			(cap & FLOW_CTRL_TX ? "enabled" : "disabled"));
490 	} else {
491 		netif_dbg(dev, link, dev->net, "half duplex");
492 	}
493 
494 	ret = smsc75xx_write_reg(dev, FLOW, flow);
495 	check_warn_return(ret, "Error writing FLOW");
496 
497 	ret = smsc75xx_write_reg(dev, FCT_FLOW, fct_flow);
498 	check_warn_return(ret, "Error writing FCT_FLOW");
499 
500 	return 0;
501 }
502 
smsc75xx_link_reset(struct usbnet * dev)503 static int smsc75xx_link_reset(struct usbnet *dev)
504 {
505 	struct mii_if_info *mii = &dev->mii;
506 	struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET };
507 	u16 lcladv, rmtadv;
508 	int ret;
509 
510 	/* read and write to clear phy interrupt status */
511 	ret = smsc75xx_mdio_read(dev->net, mii->phy_id, PHY_INT_SRC);
512 	check_warn_return(ret, "Error reading PHY_INT_SRC");
513 	smsc75xx_mdio_write(dev->net, mii->phy_id, PHY_INT_SRC, 0xffff);
514 
515 	ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL);
516 	check_warn_return(ret, "Error writing INT_STS");
517 
518 	mii_check_media(mii, 1, 1);
519 	mii_ethtool_gset(&dev->mii, &ecmd);
520 	lcladv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_ADVERTISE);
521 	rmtadv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_LPA);
522 
523 	netif_dbg(dev, link, dev->net, "speed: %u duplex: %d lcladv: %04x"
524 		  " rmtadv: %04x", ethtool_cmd_speed(&ecmd),
525 		  ecmd.duplex, lcladv, rmtadv);
526 
527 	return smsc75xx_update_flowcontrol(dev, ecmd.duplex, lcladv, rmtadv);
528 }
529 
smsc75xx_status(struct usbnet * dev,struct urb * urb)530 static void smsc75xx_status(struct usbnet *dev, struct urb *urb)
531 {
532 	u32 intdata;
533 
534 	if (urb->actual_length != 4) {
535 		netdev_warn(dev->net,
536 			"unexpected urb length %d", urb->actual_length);
537 		return;
538 	}
539 
540 	memcpy(&intdata, urb->transfer_buffer, 4);
541 	le32_to_cpus(&intdata);
542 
543 	netif_dbg(dev, link, dev->net, "intdata: 0x%08X", intdata);
544 
545 	if (intdata & INT_ENP_PHY_INT)
546 		usbnet_defer_kevent(dev, EVENT_LINK_RESET);
547 	else
548 		netdev_warn(dev->net,
549 			"unexpected interrupt, intdata=0x%08X", intdata);
550 }
551 
smsc75xx_ethtool_get_eeprom_len(struct net_device * net)552 static int smsc75xx_ethtool_get_eeprom_len(struct net_device *net)
553 {
554 	return MAX_EEPROM_SIZE;
555 }
556 
smsc75xx_ethtool_get_eeprom(struct net_device * netdev,struct ethtool_eeprom * ee,u8 * data)557 static int smsc75xx_ethtool_get_eeprom(struct net_device *netdev,
558 				       struct ethtool_eeprom *ee, u8 *data)
559 {
560 	struct usbnet *dev = netdev_priv(netdev);
561 
562 	ee->magic = LAN75XX_EEPROM_MAGIC;
563 
564 	return smsc75xx_read_eeprom(dev, ee->offset, ee->len, data);
565 }
566 
smsc75xx_ethtool_set_eeprom(struct net_device * netdev,struct ethtool_eeprom * ee,u8 * data)567 static int smsc75xx_ethtool_set_eeprom(struct net_device *netdev,
568 				       struct ethtool_eeprom *ee, u8 *data)
569 {
570 	struct usbnet *dev = netdev_priv(netdev);
571 
572 	if (ee->magic != LAN75XX_EEPROM_MAGIC) {
573 		netdev_warn(dev->net,
574 			"EEPROM: magic value mismatch: 0x%x", ee->magic);
575 		return -EINVAL;
576 	}
577 
578 	return smsc75xx_write_eeprom(dev, ee->offset, ee->len, data);
579 }
580 
581 static const struct ethtool_ops smsc75xx_ethtool_ops = {
582 	.get_link	= usbnet_get_link,
583 	.nway_reset	= usbnet_nway_reset,
584 	.get_drvinfo	= usbnet_get_drvinfo,
585 	.get_msglevel	= usbnet_get_msglevel,
586 	.set_msglevel	= usbnet_set_msglevel,
587 	.get_settings	= usbnet_get_settings,
588 	.set_settings	= usbnet_set_settings,
589 	.get_eeprom_len	= smsc75xx_ethtool_get_eeprom_len,
590 	.get_eeprom	= smsc75xx_ethtool_get_eeprom,
591 	.set_eeprom	= smsc75xx_ethtool_set_eeprom,
592 };
593 
smsc75xx_ioctl(struct net_device * netdev,struct ifreq * rq,int cmd)594 static int smsc75xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd)
595 {
596 	struct usbnet *dev = netdev_priv(netdev);
597 
598 	if (!netif_running(netdev))
599 		return -EINVAL;
600 
601 	return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
602 }
603 
smsc75xx_init_mac_address(struct usbnet * dev)604 static void smsc75xx_init_mac_address(struct usbnet *dev)
605 {
606 	/* try reading mac address from EEPROM */
607 	if (smsc75xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN,
608 			dev->net->dev_addr) == 0) {
609 		if (is_valid_ether_addr(dev->net->dev_addr)) {
610 			/* eeprom values are valid so use them */
611 			netif_dbg(dev, ifup, dev->net,
612 				"MAC address read from EEPROM");
613 			return;
614 		}
615 	}
616 
617 	/* no eeprom, or eeprom values are invalid. generate random MAC */
618 	eth_hw_addr_random(dev->net);
619 	netif_dbg(dev, ifup, dev->net, "MAC address set to random_ether_addr");
620 }
621 
smsc75xx_set_mac_address(struct usbnet * dev)622 static int smsc75xx_set_mac_address(struct usbnet *dev)
623 {
624 	u32 addr_lo = dev->net->dev_addr[0] | dev->net->dev_addr[1] << 8 |
625 		dev->net->dev_addr[2] << 16 | dev->net->dev_addr[3] << 24;
626 	u32 addr_hi = dev->net->dev_addr[4] | dev->net->dev_addr[5] << 8;
627 
628 	int ret = smsc75xx_write_reg(dev, RX_ADDRH, addr_hi);
629 	check_warn_return(ret, "Failed to write RX_ADDRH: %d", ret);
630 
631 	ret = smsc75xx_write_reg(dev, RX_ADDRL, addr_lo);
632 	check_warn_return(ret, "Failed to write RX_ADDRL: %d", ret);
633 
634 	addr_hi |= ADDR_FILTX_FB_VALID;
635 	ret = smsc75xx_write_reg(dev, ADDR_FILTX, addr_hi);
636 	check_warn_return(ret, "Failed to write ADDR_FILTX: %d", ret);
637 
638 	ret = smsc75xx_write_reg(dev, ADDR_FILTX + 4, addr_lo);
639 	check_warn_return(ret, "Failed to write ADDR_FILTX+4: %d", ret);
640 
641 	return 0;
642 }
643 
smsc75xx_phy_initialize(struct usbnet * dev)644 static int smsc75xx_phy_initialize(struct usbnet *dev)
645 {
646 	int bmcr, ret, timeout = 0;
647 
648 	/* Initialize MII structure */
649 	dev->mii.dev = dev->net;
650 	dev->mii.mdio_read = smsc75xx_mdio_read;
651 	dev->mii.mdio_write = smsc75xx_mdio_write;
652 	dev->mii.phy_id_mask = 0x1f;
653 	dev->mii.reg_num_mask = 0x1f;
654 	dev->mii.supports_gmii = 1;
655 	dev->mii.phy_id = SMSC75XX_INTERNAL_PHY_ID;
656 
657 	/* reset phy and wait for reset to complete */
658 	smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET);
659 
660 	do {
661 		msleep(10);
662 		bmcr = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR);
663 		check_warn_return(bmcr, "Error reading MII_BMCR");
664 		timeout++;
665 	} while ((bmcr & BMCR_RESET) && (timeout < 100));
666 
667 	if (timeout >= 100) {
668 		netdev_warn(dev->net, "timeout on PHY Reset");
669 		return -EIO;
670 	}
671 
672 	smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE,
673 		ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP |
674 		ADVERTISE_PAUSE_ASYM);
675 	smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000,
676 		ADVERTISE_1000FULL);
677 
678 	/* read and write to clear phy interrupt status */
679 	ret = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC);
680 	check_warn_return(ret, "Error reading PHY_INT_SRC");
681 	smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_SRC, 0xffff);
682 
683 	smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_MASK,
684 		PHY_INT_MASK_DEFAULT);
685 	mii_nway_restart(&dev->mii);
686 
687 	netif_dbg(dev, ifup, dev->net, "phy initialised successfully");
688 	return 0;
689 }
690 
smsc75xx_set_rx_max_frame_length(struct usbnet * dev,int size)691 static int smsc75xx_set_rx_max_frame_length(struct usbnet *dev, int size)
692 {
693 	int ret = 0;
694 	u32 buf;
695 	bool rxenabled;
696 
697 	ret = smsc75xx_read_reg(dev, MAC_RX, &buf);
698 	check_warn_return(ret, "Failed to read MAC_RX: %d", ret);
699 
700 	rxenabled = ((buf & MAC_RX_RXEN) != 0);
701 
702 	if (rxenabled) {
703 		buf &= ~MAC_RX_RXEN;
704 		ret = smsc75xx_write_reg(dev, MAC_RX, buf);
705 		check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
706 	}
707 
708 	/* add 4 to size for FCS */
709 	buf &= ~MAC_RX_MAX_SIZE;
710 	buf |= (((size + 4) << MAC_RX_MAX_SIZE_SHIFT) & MAC_RX_MAX_SIZE);
711 
712 	ret = smsc75xx_write_reg(dev, MAC_RX, buf);
713 	check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
714 
715 	if (rxenabled) {
716 		buf |= MAC_RX_RXEN;
717 		ret = smsc75xx_write_reg(dev, MAC_RX, buf);
718 		check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
719 	}
720 
721 	return 0;
722 }
723 
smsc75xx_change_mtu(struct net_device * netdev,int new_mtu)724 static int smsc75xx_change_mtu(struct net_device *netdev, int new_mtu)
725 {
726 	struct usbnet *dev = netdev_priv(netdev);
727 	int ret;
728 
729 	if (new_mtu > MAX_SINGLE_PACKET_SIZE)
730 		return -EINVAL;
731 
732 	ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu + ETH_HLEN);
733 	check_warn_return(ret, "Failed to set mac rx frame length");
734 
735 	return usbnet_change_mtu(netdev, new_mtu);
736 }
737 
738 /* Enable or disable Rx checksum offload engine */
smsc75xx_set_features(struct net_device * netdev,netdev_features_t features)739 static int smsc75xx_set_features(struct net_device *netdev,
740 	netdev_features_t features)
741 {
742 	struct usbnet *dev = netdev_priv(netdev);
743 	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
744 	unsigned long flags;
745 	int ret;
746 
747 	spin_lock_irqsave(&pdata->rfe_ctl_lock, flags);
748 
749 	if (features & NETIF_F_RXCSUM)
750 		pdata->rfe_ctl |= RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM;
751 	else
752 		pdata->rfe_ctl &= ~(RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM);
753 
754 	spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags);
755 	/* it's racing here! */
756 
757 	ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
758 	check_warn_return(ret, "Error writing RFE_CTL");
759 
760 	return 0;
761 }
762 
smsc75xx_reset(struct usbnet * dev)763 static int smsc75xx_reset(struct usbnet *dev)
764 {
765 	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
766 	u32 buf;
767 	int ret = 0, timeout;
768 
769 	netif_dbg(dev, ifup, dev->net, "entering smsc75xx_reset");
770 
771 	ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
772 	check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
773 
774 	buf |= HW_CFG_LRST;
775 
776 	ret = smsc75xx_write_reg(dev, HW_CFG, buf);
777 	check_warn_return(ret, "Failed to write HW_CFG: %d", ret);
778 
779 	timeout = 0;
780 	do {
781 		msleep(10);
782 		ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
783 		check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
784 		timeout++;
785 	} while ((buf & HW_CFG_LRST) && (timeout < 100));
786 
787 	if (timeout >= 100) {
788 		netdev_warn(dev->net, "timeout on completion of Lite Reset");
789 		return -EIO;
790 	}
791 
792 	netif_dbg(dev, ifup, dev->net, "Lite reset complete, resetting PHY");
793 
794 	ret = smsc75xx_read_reg(dev, PMT_CTL, &buf);
795 	check_warn_return(ret, "Failed to read PMT_CTL: %d", ret);
796 
797 	buf |= PMT_CTL_PHY_RST;
798 
799 	ret = smsc75xx_write_reg(dev, PMT_CTL, buf);
800 	check_warn_return(ret, "Failed to write PMT_CTL: %d", ret);
801 
802 	timeout = 0;
803 	do {
804 		msleep(10);
805 		ret = smsc75xx_read_reg(dev, PMT_CTL, &buf);
806 		check_warn_return(ret, "Failed to read PMT_CTL: %d", ret);
807 		timeout++;
808 	} while ((buf & PMT_CTL_PHY_RST) && (timeout < 100));
809 
810 	if (timeout >= 100) {
811 		netdev_warn(dev->net, "timeout waiting for PHY Reset");
812 		return -EIO;
813 	}
814 
815 	netif_dbg(dev, ifup, dev->net, "PHY reset complete");
816 
817 	smsc75xx_init_mac_address(dev);
818 
819 	ret = smsc75xx_set_mac_address(dev);
820 	check_warn_return(ret, "Failed to set mac address");
821 
822 	netif_dbg(dev, ifup, dev->net, "MAC Address: %pM", dev->net->dev_addr);
823 
824 	ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
825 	check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
826 
827 	netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG : 0x%08x", buf);
828 
829 	buf |= HW_CFG_BIR;
830 
831 	ret = smsc75xx_write_reg(dev, HW_CFG, buf);
832 	check_warn_return(ret, "Failed to write HW_CFG: %d", ret);
833 
834 	ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
835 	check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
836 
837 	netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG after "
838 			"writing HW_CFG_BIR: 0x%08x", buf);
839 
840 	if (!turbo_mode) {
841 		buf = 0;
842 		dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE;
843 	} else if (dev->udev->speed == USB_SPEED_HIGH) {
844 		buf = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE;
845 		dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE;
846 	} else {
847 		buf = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE;
848 		dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE;
849 	}
850 
851 	netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld",
852 		(ulong)dev->rx_urb_size);
853 
854 	ret = smsc75xx_write_reg(dev, BURST_CAP, buf);
855 	check_warn_return(ret, "Failed to write BURST_CAP: %d", ret);
856 
857 	ret = smsc75xx_read_reg(dev, BURST_CAP, &buf);
858 	check_warn_return(ret, "Failed to read BURST_CAP: %d", ret);
859 
860 	netif_dbg(dev, ifup, dev->net,
861 		"Read Value from BURST_CAP after writing: 0x%08x", buf);
862 
863 	ret = smsc75xx_write_reg(dev, BULK_IN_DLY, DEFAULT_BULK_IN_DELAY);
864 	check_warn_return(ret, "Failed to write BULK_IN_DLY: %d", ret);
865 
866 	ret = smsc75xx_read_reg(dev, BULK_IN_DLY, &buf);
867 	check_warn_return(ret, "Failed to read BULK_IN_DLY: %d", ret);
868 
869 	netif_dbg(dev, ifup, dev->net,
870 		"Read Value from BULK_IN_DLY after writing: 0x%08x", buf);
871 
872 	if (turbo_mode) {
873 		ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
874 		check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
875 
876 		netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x", buf);
877 
878 		buf |= (HW_CFG_MEF | HW_CFG_BCE);
879 
880 		ret = smsc75xx_write_reg(dev, HW_CFG, buf);
881 		check_warn_return(ret, "Failed to write HW_CFG: %d", ret);
882 
883 		ret = smsc75xx_read_reg(dev, HW_CFG, &buf);
884 		check_warn_return(ret, "Failed to read HW_CFG: %d", ret);
885 
886 		netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x", buf);
887 	}
888 
889 	/* set FIFO sizes */
890 	buf = (MAX_RX_FIFO_SIZE - 512) / 512;
891 	ret = smsc75xx_write_reg(dev, FCT_RX_FIFO_END, buf);
892 	check_warn_return(ret, "Failed to write FCT_RX_FIFO_END: %d", ret);
893 
894 	netif_dbg(dev, ifup, dev->net, "FCT_RX_FIFO_END set to 0x%08x", buf);
895 
896 	buf = (MAX_TX_FIFO_SIZE - 512) / 512;
897 	ret = smsc75xx_write_reg(dev, FCT_TX_FIFO_END, buf);
898 	check_warn_return(ret, "Failed to write FCT_TX_FIFO_END: %d", ret);
899 
900 	netif_dbg(dev, ifup, dev->net, "FCT_TX_FIFO_END set to 0x%08x", buf);
901 
902 	ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL);
903 	check_warn_return(ret, "Failed to write INT_STS: %d", ret);
904 
905 	ret = smsc75xx_read_reg(dev, ID_REV, &buf);
906 	check_warn_return(ret, "Failed to read ID_REV: %d", ret);
907 
908 	netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x", buf);
909 
910 	/* Configure GPIO pins as LED outputs */
911 	ret = smsc75xx_read_reg(dev, LED_GPIO_CFG, &buf);
912 	check_warn_return(ret, "Failed to read LED_GPIO_CFG: %d", ret);
913 
914 	buf &= ~(LED_GPIO_CFG_LED2_FUN_SEL | LED_GPIO_CFG_LED10_FUN_SEL);
915 	buf |= LED_GPIO_CFG_LEDGPIO_EN | LED_GPIO_CFG_LED2_FUN_SEL;
916 
917 	ret = smsc75xx_write_reg(dev, LED_GPIO_CFG, buf);
918 	check_warn_return(ret, "Failed to write LED_GPIO_CFG: %d", ret);
919 
920 	ret = smsc75xx_write_reg(dev, FLOW, 0);
921 	check_warn_return(ret, "Failed to write FLOW: %d", ret);
922 
923 	ret = smsc75xx_write_reg(dev, FCT_FLOW, 0);
924 	check_warn_return(ret, "Failed to write FCT_FLOW: %d", ret);
925 
926 	/* Don't need rfe_ctl_lock during initialisation */
927 	ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl);
928 	check_warn_return(ret, "Failed to read RFE_CTL: %d", ret);
929 
930 	pdata->rfe_ctl |= RFE_CTL_AB | RFE_CTL_DPF;
931 
932 	ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl);
933 	check_warn_return(ret, "Failed to write RFE_CTL: %d", ret);
934 
935 	ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl);
936 	check_warn_return(ret, "Failed to read RFE_CTL: %d", ret);
937 
938 	netif_dbg(dev, ifup, dev->net, "RFE_CTL set to 0x%08x", pdata->rfe_ctl);
939 
940 	/* Enable or disable checksum offload engines */
941 	smsc75xx_set_features(dev->net, dev->net->features);
942 
943 	smsc75xx_set_multicast(dev->net);
944 
945 	ret = smsc75xx_phy_initialize(dev);
946 	check_warn_return(ret, "Failed to initialize PHY: %d", ret);
947 
948 	ret = smsc75xx_read_reg(dev, INT_EP_CTL, &buf);
949 	check_warn_return(ret, "Failed to read INT_EP_CTL: %d", ret);
950 
951 	/* enable PHY interrupts */
952 	buf |= INT_ENP_PHY_INT;
953 
954 	ret = smsc75xx_write_reg(dev, INT_EP_CTL, buf);
955 	check_warn_return(ret, "Failed to write INT_EP_CTL: %d", ret);
956 
957 	/* allow mac to detect speed and duplex from phy */
958 	ret = smsc75xx_read_reg(dev, MAC_CR, &buf);
959 	check_warn_return(ret, "Failed to read MAC_CR: %d", ret);
960 
961 	buf |= (MAC_CR_ADD | MAC_CR_ASD);
962 	ret = smsc75xx_write_reg(dev, MAC_CR, buf);
963 	check_warn_return(ret, "Failed to write MAC_CR: %d", ret);
964 
965 	ret = smsc75xx_read_reg(dev, MAC_TX, &buf);
966 	check_warn_return(ret, "Failed to read MAC_TX: %d", ret);
967 
968 	buf |= MAC_TX_TXEN;
969 
970 	ret = smsc75xx_write_reg(dev, MAC_TX, buf);
971 	check_warn_return(ret, "Failed to write MAC_TX: %d", ret);
972 
973 	netif_dbg(dev, ifup, dev->net, "MAC_TX set to 0x%08x", buf);
974 
975 	ret = smsc75xx_read_reg(dev, FCT_TX_CTL, &buf);
976 	check_warn_return(ret, "Failed to read FCT_TX_CTL: %d", ret);
977 
978 	buf |= FCT_TX_CTL_EN;
979 
980 	ret = smsc75xx_write_reg(dev, FCT_TX_CTL, buf);
981 	check_warn_return(ret, "Failed to write FCT_TX_CTL: %d", ret);
982 
983 	netif_dbg(dev, ifup, dev->net, "FCT_TX_CTL set to 0x%08x", buf);
984 
985 	ret = smsc75xx_set_rx_max_frame_length(dev, dev->net->mtu + ETH_HLEN);
986 	check_warn_return(ret, "Failed to set max rx frame length");
987 
988 	ret = smsc75xx_read_reg(dev, MAC_RX, &buf);
989 	check_warn_return(ret, "Failed to read MAC_RX: %d", ret);
990 
991 	buf |= MAC_RX_RXEN;
992 
993 	ret = smsc75xx_write_reg(dev, MAC_RX, buf);
994 	check_warn_return(ret, "Failed to write MAC_RX: %d", ret);
995 
996 	netif_dbg(dev, ifup, dev->net, "MAC_RX set to 0x%08x", buf);
997 
998 	ret = smsc75xx_read_reg(dev, FCT_RX_CTL, &buf);
999 	check_warn_return(ret, "Failed to read FCT_RX_CTL: %d", ret);
1000 
1001 	buf |= FCT_RX_CTL_EN;
1002 
1003 	ret = smsc75xx_write_reg(dev, FCT_RX_CTL, buf);
1004 	check_warn_return(ret, "Failed to write FCT_RX_CTL: %d", ret);
1005 
1006 	netif_dbg(dev, ifup, dev->net, "FCT_RX_CTL set to 0x%08x", buf);
1007 
1008 	netif_dbg(dev, ifup, dev->net, "smsc75xx_reset, return 0");
1009 	return 0;
1010 }
1011 
1012 static const struct net_device_ops smsc75xx_netdev_ops = {
1013 	.ndo_open		= usbnet_open,
1014 	.ndo_stop		= usbnet_stop,
1015 	.ndo_start_xmit		= usbnet_start_xmit,
1016 	.ndo_tx_timeout		= usbnet_tx_timeout,
1017 	.ndo_change_mtu		= smsc75xx_change_mtu,
1018 	.ndo_set_mac_address 	= eth_mac_addr,
1019 	.ndo_validate_addr	= eth_validate_addr,
1020 	.ndo_do_ioctl 		= smsc75xx_ioctl,
1021 	.ndo_set_rx_mode	= smsc75xx_set_multicast,
1022 	.ndo_set_features	= smsc75xx_set_features,
1023 };
1024 
smsc75xx_bind(struct usbnet * dev,struct usb_interface * intf)1025 static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf)
1026 {
1027 	struct smsc75xx_priv *pdata = NULL;
1028 	int ret;
1029 
1030 	printk(KERN_INFO SMSC_CHIPNAME " v" SMSC_DRIVER_VERSION "\n");
1031 
1032 	ret = usbnet_get_endpoints(dev, intf);
1033 	check_warn_return(ret, "usbnet_get_endpoints failed: %d", ret);
1034 
1035 	dev->data[0] = (unsigned long)kzalloc(sizeof(struct smsc75xx_priv),
1036 		GFP_KERNEL);
1037 
1038 	pdata = (struct smsc75xx_priv *)(dev->data[0]);
1039 	if (!pdata) {
1040 		netdev_warn(dev->net, "Unable to allocate smsc75xx_priv");
1041 		return -ENOMEM;
1042 	}
1043 
1044 	pdata->dev = dev;
1045 
1046 	spin_lock_init(&pdata->rfe_ctl_lock);
1047 	mutex_init(&pdata->dataport_mutex);
1048 
1049 	INIT_WORK(&pdata->set_multicast, smsc75xx_deferred_multicast_write);
1050 
1051 	if (DEFAULT_TX_CSUM_ENABLE)
1052 		dev->net->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM;
1053 
1054 	if (DEFAULT_RX_CSUM_ENABLE)
1055 		dev->net->features |= NETIF_F_RXCSUM;
1056 
1057 	dev->net->hw_features = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
1058 				NETIF_F_RXCSUM;
1059 
1060 	/* Init all registers */
1061 	ret = smsc75xx_reset(dev);
1062 
1063 	dev->net->netdev_ops = &smsc75xx_netdev_ops;
1064 	dev->net->ethtool_ops = &smsc75xx_ethtool_ops;
1065 	dev->net->flags |= IFF_MULTICAST;
1066 	dev->net->hard_header_len += SMSC75XX_TX_OVERHEAD;
1067 	dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len;
1068 	return 0;
1069 }
1070 
smsc75xx_unbind(struct usbnet * dev,struct usb_interface * intf)1071 static void smsc75xx_unbind(struct usbnet *dev, struct usb_interface *intf)
1072 {
1073 	struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]);
1074 	if (pdata) {
1075 		netif_dbg(dev, ifdown, dev->net, "free pdata");
1076 		kfree(pdata);
1077 		pdata = NULL;
1078 		dev->data[0] = 0;
1079 	}
1080 }
1081 
smsc75xx_rx_csum_offload(struct usbnet * dev,struct sk_buff * skb,u32 rx_cmd_a,u32 rx_cmd_b)1082 static void smsc75xx_rx_csum_offload(struct usbnet *dev, struct sk_buff *skb,
1083 				     u32 rx_cmd_a, u32 rx_cmd_b)
1084 {
1085 	if (!(dev->net->features & NETIF_F_RXCSUM) ||
1086 	    unlikely(rx_cmd_a & RX_CMD_A_LCSM)) {
1087 		skb->ip_summed = CHECKSUM_NONE;
1088 	} else {
1089 		skb->csum = ntohs((u16)(rx_cmd_b >> RX_CMD_B_CSUM_SHIFT));
1090 		skb->ip_summed = CHECKSUM_COMPLETE;
1091 	}
1092 }
1093 
smsc75xx_rx_fixup(struct usbnet * dev,struct sk_buff * skb)1094 static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
1095 {
1096 	while (skb->len > 0) {
1097 		u32 rx_cmd_a, rx_cmd_b, align_count, size;
1098 		struct sk_buff *ax_skb;
1099 		unsigned char *packet;
1100 
1101 		memcpy(&rx_cmd_a, skb->data, sizeof(rx_cmd_a));
1102 		le32_to_cpus(&rx_cmd_a);
1103 		skb_pull(skb, 4);
1104 
1105 		memcpy(&rx_cmd_b, skb->data, sizeof(rx_cmd_b));
1106 		le32_to_cpus(&rx_cmd_b);
1107 		skb_pull(skb, 4 + RXW_PADDING);
1108 
1109 		packet = skb->data;
1110 
1111 		/* get the packet length */
1112 		size = (rx_cmd_a & RX_CMD_A_LEN) - RXW_PADDING;
1113 		align_count = (4 - ((size + RXW_PADDING) % 4)) % 4;
1114 
1115 		if (unlikely(rx_cmd_a & RX_CMD_A_RED)) {
1116 			netif_dbg(dev, rx_err, dev->net,
1117 				"Error rx_cmd_a=0x%08x", rx_cmd_a);
1118 			dev->net->stats.rx_errors++;
1119 			dev->net->stats.rx_dropped++;
1120 
1121 			if (rx_cmd_a & RX_CMD_A_FCS)
1122 				dev->net->stats.rx_crc_errors++;
1123 			else if (rx_cmd_a & (RX_CMD_A_LONG | RX_CMD_A_RUNT))
1124 				dev->net->stats.rx_frame_errors++;
1125 		} else {
1126 			/* MAX_SINGLE_PACKET_SIZE + 4(CRC) + 2(COE) + 4(Vlan) */
1127 			if (unlikely(size > (MAX_SINGLE_PACKET_SIZE + ETH_HLEN + 12))) {
1128 				netif_dbg(dev, rx_err, dev->net,
1129 					"size err rx_cmd_a=0x%08x", rx_cmd_a);
1130 				return 0;
1131 			}
1132 
1133 			/* last frame in this batch */
1134 			if (skb->len == size) {
1135 				smsc75xx_rx_csum_offload(dev, skb, rx_cmd_a,
1136 					rx_cmd_b);
1137 
1138 				skb_trim(skb, skb->len - 4); /* remove fcs */
1139 				skb->truesize = size + sizeof(struct sk_buff);
1140 
1141 				return 1;
1142 			}
1143 
1144 			ax_skb = skb_clone(skb, GFP_ATOMIC);
1145 			if (unlikely(!ax_skb)) {
1146 				netdev_warn(dev->net, "Error allocating skb");
1147 				return 0;
1148 			}
1149 
1150 			ax_skb->len = size;
1151 			ax_skb->data = packet;
1152 			skb_set_tail_pointer(ax_skb, size);
1153 
1154 			smsc75xx_rx_csum_offload(dev, ax_skb, rx_cmd_a,
1155 				rx_cmd_b);
1156 
1157 			skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */
1158 			ax_skb->truesize = size + sizeof(struct sk_buff);
1159 
1160 			usbnet_skb_return(dev, ax_skb);
1161 		}
1162 
1163 		skb_pull(skb, size);
1164 
1165 		/* padding bytes before the next frame starts */
1166 		if (skb->len)
1167 			skb_pull(skb, align_count);
1168 	}
1169 
1170 	if (unlikely(skb->len < 0)) {
1171 		netdev_warn(dev->net, "invalid rx length<0 %d", skb->len);
1172 		return 0;
1173 	}
1174 
1175 	return 1;
1176 }
1177 
smsc75xx_tx_fixup(struct usbnet * dev,struct sk_buff * skb,gfp_t flags)1178 static struct sk_buff *smsc75xx_tx_fixup(struct usbnet *dev,
1179 					 struct sk_buff *skb, gfp_t flags)
1180 {
1181 	u32 tx_cmd_a, tx_cmd_b;
1182 
1183 	if (skb_headroom(skb) < SMSC75XX_TX_OVERHEAD) {
1184 		struct sk_buff *skb2 =
1185 			skb_copy_expand(skb, SMSC75XX_TX_OVERHEAD, 0, flags);
1186 		dev_kfree_skb_any(skb);
1187 		skb = skb2;
1188 		if (!skb)
1189 			return NULL;
1190 	}
1191 
1192 	tx_cmd_a = (u32)(skb->len & TX_CMD_A_LEN) | TX_CMD_A_FCS;
1193 
1194 	if (skb->ip_summed == CHECKSUM_PARTIAL)
1195 		tx_cmd_a |= TX_CMD_A_IPE | TX_CMD_A_TPE;
1196 
1197 	if (skb_is_gso(skb)) {
1198 		u16 mss = max(skb_shinfo(skb)->gso_size, TX_MSS_MIN);
1199 		tx_cmd_b = (mss << TX_CMD_B_MSS_SHIFT) & TX_CMD_B_MSS;
1200 
1201 		tx_cmd_a |= TX_CMD_A_LSO;
1202 	} else {
1203 		tx_cmd_b = 0;
1204 	}
1205 
1206 	skb_push(skb, 4);
1207 	cpu_to_le32s(&tx_cmd_b);
1208 	memcpy(skb->data, &tx_cmd_b, 4);
1209 
1210 	skb_push(skb, 4);
1211 	cpu_to_le32s(&tx_cmd_a);
1212 	memcpy(skb->data, &tx_cmd_a, 4);
1213 
1214 	return skb;
1215 }
1216 
1217 static const struct driver_info smsc75xx_info = {
1218 	.description	= "smsc75xx USB 2.0 Gigabit Ethernet",
1219 	.bind		= smsc75xx_bind,
1220 	.unbind		= smsc75xx_unbind,
1221 	.link_reset	= smsc75xx_link_reset,
1222 	.reset		= smsc75xx_reset,
1223 	.rx_fixup	= smsc75xx_rx_fixup,
1224 	.tx_fixup	= smsc75xx_tx_fixup,
1225 	.status		= smsc75xx_status,
1226 	.flags		= FLAG_ETHER | FLAG_SEND_ZLP | FLAG_LINK_INTR,
1227 };
1228 
1229 static const struct usb_device_id products[] = {
1230 	{
1231 		/* SMSC7500 USB Gigabit Ethernet Device */
1232 		USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7500),
1233 		.driver_info = (unsigned long) &smsc75xx_info,
1234 	},
1235 	{
1236 		/* SMSC7500 USB Gigabit Ethernet Device */
1237 		USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7505),
1238 		.driver_info = (unsigned long) &smsc75xx_info,
1239 	},
1240 	{ },		/* END */
1241 };
1242 MODULE_DEVICE_TABLE(usb, products);
1243 
1244 static struct usb_driver smsc75xx_driver = {
1245 	.name		= SMSC_CHIPNAME,
1246 	.id_table	= products,
1247 	.probe		= usbnet_probe,
1248 	.suspend	= usbnet_suspend,
1249 	.resume		= usbnet_resume,
1250 	.disconnect	= usbnet_disconnect,
1251 };
1252 
1253 module_usb_driver(smsc75xx_driver);
1254 
1255 MODULE_AUTHOR("Nancy Lin");
1256 MODULE_AUTHOR("Steve Glendinning <steve.glendinning@smsc.com>");
1257 MODULE_DESCRIPTION("SMSC75XX USB 2.0 Gigabit Ethernet Devices");
1258 MODULE_LICENSE("GPL");
1259