1 /*
2 * OHCI HCD (Host Controller Driver) for USB.
3 *
4 * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
5 * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
6 *
7 * [ Initialisation is based on Linus' ]
8 * [ uhci code and gregs ohci fragments ]
9 * [ (C) Copyright 1999 Linus Torvalds ]
10 * [ (C) Copyright 1999 Gregory P. Smith]
11 *
12 * PCI Bus Glue
13 *
14 * This file is licenced under the GPL.
15 */
16
17 #ifndef CONFIG_PCI
18 #error "This file is PCI bus glue. CONFIG_PCI must be defined."
19 #endif
20
21 #include <linux/pci.h>
22 #include <linux/io.h>
23
24
25 /*-------------------------------------------------------------------------*/
26
broken_suspend(struct usb_hcd * hcd)27 static int broken_suspend(struct usb_hcd *hcd)
28 {
29 device_init_wakeup(&hcd->self.root_hub->dev, 0);
30 return 0;
31 }
32
33 /* AMD 756, for most chips (early revs), corrupts register
34 * values on read ... so enable the vendor workaround.
35 */
ohci_quirk_amd756(struct usb_hcd * hcd)36 static int ohci_quirk_amd756(struct usb_hcd *hcd)
37 {
38 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
39
40 ohci->flags = OHCI_QUIRK_AMD756;
41 ohci_dbg (ohci, "AMD756 erratum 4 workaround\n");
42
43 /* also erratum 10 (suspend/resume issues) */
44 return broken_suspend(hcd);
45 }
46
47 /* Apple's OHCI driver has a lot of bizarre workarounds
48 * for this chip. Evidently control and bulk lists
49 * can get confused. (B&W G3 models, and ...)
50 */
ohci_quirk_opti(struct usb_hcd * hcd)51 static int ohci_quirk_opti(struct usb_hcd *hcd)
52 {
53 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
54
55 ohci_dbg (ohci, "WARNING: OPTi workarounds unavailable\n");
56
57 return 0;
58 }
59
60 /* Check for NSC87560. We have to look at the bridge (fn1) to
61 * identify the USB (fn2). This quirk might apply to more or
62 * even all NSC stuff.
63 */
ohci_quirk_ns(struct usb_hcd * hcd)64 static int ohci_quirk_ns(struct usb_hcd *hcd)
65 {
66 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
67 struct pci_dev *b;
68
69 b = pci_get_slot (pdev->bus, PCI_DEVFN (PCI_SLOT (pdev->devfn), 1));
70 if (b && b->device == PCI_DEVICE_ID_NS_87560_LIO
71 && b->vendor == PCI_VENDOR_ID_NS) {
72 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
73
74 ohci->flags |= OHCI_QUIRK_SUPERIO;
75 ohci_dbg (ohci, "Using NSC SuperIO setup\n");
76 }
77 pci_dev_put(b);
78
79 return 0;
80 }
81
82 /* Check for Compaq's ZFMicro chipset, which needs short
83 * delays before control or bulk queues get re-activated
84 * in finish_unlinks()
85 */
ohci_quirk_zfmicro(struct usb_hcd * hcd)86 static int ohci_quirk_zfmicro(struct usb_hcd *hcd)
87 {
88 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
89
90 ohci->flags |= OHCI_QUIRK_ZFMICRO;
91 ohci_dbg(ohci, "enabled Compaq ZFMicro chipset quirks\n");
92
93 return 0;
94 }
95
96 /* Check for Toshiba SCC OHCI which has big endian registers
97 * and little endian in memory data structures
98 */
ohci_quirk_toshiba_scc(struct usb_hcd * hcd)99 static int ohci_quirk_toshiba_scc(struct usb_hcd *hcd)
100 {
101 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
102
103 /* That chip is only present in the southbridge of some
104 * cell based platforms which are supposed to select
105 * CONFIG_USB_OHCI_BIG_ENDIAN_MMIO. We verify here if
106 * that was the case though.
107 */
108 #ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
109 ohci->flags |= OHCI_QUIRK_BE_MMIO;
110 ohci_dbg (ohci, "enabled big endian Toshiba quirk\n");
111 return 0;
112 #else
113 ohci_err (ohci, "unsupported big endian Toshiba quirk\n");
114 return -ENXIO;
115 #endif
116 }
117
118 /* Check for NEC chip and apply quirk for allegedly lost interrupts.
119 */
120
ohci_quirk_nec_worker(struct work_struct * work)121 static void ohci_quirk_nec_worker(struct work_struct *work)
122 {
123 struct ohci_hcd *ohci = container_of(work, struct ohci_hcd, nec_work);
124 int status;
125
126 status = ohci_init(ohci);
127 if (status != 0) {
128 ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
129 "ohci_init", status);
130 return;
131 }
132
133 status = ohci_restart(ohci);
134 if (status != 0)
135 ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
136 "ohci_restart", status);
137 }
138
ohci_quirk_nec(struct usb_hcd * hcd)139 static int ohci_quirk_nec(struct usb_hcd *hcd)
140 {
141 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
142
143 ohci->flags |= OHCI_QUIRK_NEC;
144 INIT_WORK(&ohci->nec_work, ohci_quirk_nec_worker);
145 ohci_dbg (ohci, "enabled NEC chipset lost interrupt quirk\n");
146
147 return 0;
148 }
149
ohci_quirk_amd700(struct usb_hcd * hcd)150 static int ohci_quirk_amd700(struct usb_hcd *hcd)
151 {
152 struct ohci_hcd *ohci = hcd_to_ohci(hcd);
153 struct pci_dev *amd_smbus_dev;
154 u8 rev;
155
156 if (usb_amd_find_chipset_info())
157 ohci->flags |= OHCI_QUIRK_AMD_PLL;
158
159 amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI,
160 PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL);
161 if (!amd_smbus_dev)
162 return 0;
163
164 rev = amd_smbus_dev->revision;
165
166 /* SB800 needs pre-fetch fix */
167 if ((rev >= 0x40) && (rev <= 0x4f)) {
168 ohci->flags |= OHCI_QUIRK_AMD_PREFETCH;
169 ohci_dbg(ohci, "enabled AMD prefetch quirk\n");
170 }
171
172 pci_dev_put(amd_smbus_dev);
173 amd_smbus_dev = NULL;
174
175 return 0;
176 }
177
sb800_prefetch(struct ohci_hcd * ohci,int on)178 static void sb800_prefetch(struct ohci_hcd *ohci, int on)
179 {
180 struct pci_dev *pdev;
181 u16 misc;
182
183 pdev = to_pci_dev(ohci_to_hcd(ohci)->self.controller);
184 pci_read_config_word(pdev, 0x50, &misc);
185 if (on == 0)
186 pci_write_config_word(pdev, 0x50, misc & 0xfcff);
187 else
188 pci_write_config_word(pdev, 0x50, misc | 0x0300);
189 }
190
191 /* List of quirks for OHCI */
192 static const struct pci_device_id ohci_pci_quirks[] = {
193 {
194 PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x740c),
195 .driver_data = (unsigned long)ohci_quirk_amd756,
196 },
197 {
198 PCI_DEVICE(PCI_VENDOR_ID_OPTI, 0xc861),
199 .driver_data = (unsigned long)ohci_quirk_opti,
200 },
201 {
202 PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_ANY_ID),
203 .driver_data = (unsigned long)ohci_quirk_ns,
204 },
205 {
206 PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xa0f8),
207 .driver_data = (unsigned long)ohci_quirk_zfmicro,
208 },
209 {
210 PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, 0x01b6),
211 .driver_data = (unsigned long)ohci_quirk_toshiba_scc,
212 },
213 {
214 PCI_DEVICE(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB),
215 .driver_data = (unsigned long)ohci_quirk_nec,
216 },
217 {
218 /* Toshiba portege 4000 */
219 .vendor = PCI_VENDOR_ID_AL,
220 .device = 0x5237,
221 .subvendor = PCI_VENDOR_ID_TOSHIBA,
222 .subdevice = 0x0004,
223 .driver_data = (unsigned long) broken_suspend,
224 },
225 {
226 PCI_DEVICE(PCI_VENDOR_ID_ITE, 0x8152),
227 .driver_data = (unsigned long) broken_suspend,
228 },
229 {
230 PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4397),
231 .driver_data = (unsigned long)ohci_quirk_amd700,
232 },
233 {
234 PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4398),
235 .driver_data = (unsigned long)ohci_quirk_amd700,
236 },
237 {
238 PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399),
239 .driver_data = (unsigned long)ohci_quirk_amd700,
240 },
241
242 /* FIXME for some of the early AMD 760 southbridges, OHCI
243 * won't work at all. blacklist them.
244 */
245
246 {},
247 };
248
ohci_pci_reset(struct usb_hcd * hcd)249 static int ohci_pci_reset (struct usb_hcd *hcd)
250 {
251 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
252 int ret = 0;
253
254 if (hcd->self.controller) {
255 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
256 const struct pci_device_id *quirk_id;
257
258 quirk_id = pci_match_id(ohci_pci_quirks, pdev);
259 if (quirk_id != NULL) {
260 int (*quirk)(struct usb_hcd *ohci);
261 quirk = (void *)quirk_id->driver_data;
262 ret = quirk(hcd);
263 }
264 }
265 if (ret == 0) {
266 ohci_hcd_init (ohci);
267 return ohci_init (ohci);
268 }
269 return ret;
270 }
271
272
ohci_pci_start(struct usb_hcd * hcd)273 static int __devinit ohci_pci_start (struct usb_hcd *hcd)
274 {
275 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
276 int ret;
277
278 #ifdef CONFIG_PM /* avoid warnings about unused pdev */
279 if (hcd->self.controller) {
280 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
281
282 /* RWC may not be set for add-in PCI cards, since boot
283 * firmware probably ignored them. This transfers PCI
284 * PM wakeup capabilities.
285 */
286 if (device_can_wakeup(&pdev->dev))
287 ohci->hc_control |= OHCI_CTRL_RWC;
288 }
289 #endif /* CONFIG_PM */
290
291 ret = ohci_run (ohci);
292 if (ret < 0) {
293 ohci_err (ohci, "can't start\n");
294 ohci_stop (hcd);
295 }
296 return ret;
297 }
298
299 #ifdef CONFIG_PM
300
ohci_pci_suspend(struct usb_hcd * hcd,bool do_wakeup)301 static int ohci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
302 {
303 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
304 unsigned long flags;
305 int rc = 0;
306
307 /* Root hub was already suspended. Disable irq emission and
308 * mark HW unaccessible, bail out if RH has been resumed. Use
309 * the spinlock to properly synchronize with possible pending
310 * RH suspend or resume activity.
311 */
312 spin_lock_irqsave (&ohci->lock, flags);
313 if (ohci->rh_state != OHCI_RH_SUSPENDED) {
314 rc = -EINVAL;
315 goto bail;
316 }
317 ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
318 (void)ohci_readl(ohci, &ohci->regs->intrdisable);
319
320 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
321 bail:
322 spin_unlock_irqrestore (&ohci->lock, flags);
323
324 return rc;
325 }
326
327
ohci_pci_resume(struct usb_hcd * hcd,bool hibernated)328 static int ohci_pci_resume(struct usb_hcd *hcd, bool hibernated)
329 {
330 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
331
332 /* Make sure resume from hibernation re-enumerates everything */
333 if (hibernated)
334 ohci_usb_reset(hcd_to_ohci(hcd));
335
336 ohci_finish_controller_resume(hcd);
337 return 0;
338 }
339
340 #endif /* CONFIG_PM */
341
342
343 /*-------------------------------------------------------------------------*/
344
345 static const struct hc_driver ohci_pci_hc_driver = {
346 .description = hcd_name,
347 .product_desc = "OHCI Host Controller",
348 .hcd_priv_size = sizeof(struct ohci_hcd),
349
350 /*
351 * generic hardware linkage
352 */
353 .irq = ohci_irq,
354 .flags = HCD_MEMORY | HCD_USB11,
355
356 /*
357 * basic lifecycle operations
358 */
359 .reset = ohci_pci_reset,
360 .start = ohci_pci_start,
361 .stop = ohci_stop,
362 .shutdown = ohci_shutdown,
363
364 #ifdef CONFIG_PM
365 .pci_suspend = ohci_pci_suspend,
366 .pci_resume = ohci_pci_resume,
367 #endif
368
369 /*
370 * managing i/o requests and associated device resources
371 */
372 .urb_enqueue = ohci_urb_enqueue,
373 .urb_dequeue = ohci_urb_dequeue,
374 .endpoint_disable = ohci_endpoint_disable,
375
376 /*
377 * scheduling support
378 */
379 .get_frame_number = ohci_get_frame,
380
381 /*
382 * root hub support
383 */
384 .hub_status_data = ohci_hub_status_data,
385 .hub_control = ohci_hub_control,
386 #ifdef CONFIG_PM
387 .bus_suspend = ohci_bus_suspend,
388 .bus_resume = ohci_bus_resume,
389 #endif
390 .start_port_reset = ohci_start_port_reset,
391 };
392
393 /*-------------------------------------------------------------------------*/
394
395
396 static const struct pci_device_id pci_ids [] = { {
397 /* handle any USB OHCI controller */
398 PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0),
399 .driver_data = (unsigned long) &ohci_pci_hc_driver,
400 }, {
401 /* The device in the ConneXT I/O hub has no class reg */
402 PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_OHCI),
403 .driver_data = (unsigned long) &ohci_pci_hc_driver,
404 }, { /* end: all zeroes */ }
405 };
406 MODULE_DEVICE_TABLE (pci, pci_ids);
407
408 /* pci driver glue; this is a "new style" PCI driver module */
409 static struct pci_driver ohci_pci_driver = {
410 .name = (char *) hcd_name,
411 .id_table = pci_ids,
412
413 .probe = usb_hcd_pci_probe,
414 .remove = usb_hcd_pci_remove,
415 .shutdown = usb_hcd_pci_shutdown,
416
417 #ifdef CONFIG_PM_SLEEP
418 .driver = {
419 .pm = &usb_hcd_pci_pm_ops
420 },
421 #endif
422 };
423