• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * OHCI HCD (Host Controller Driver) for USB.
3  *
4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
5  * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
6  * (C) Copyright 2002 Hewlett-Packard Company
7  * (C) Copyright 2005 Embedded Alley Solutions, Inc.
8  *
9  * Bus Glue for PNX8550
10  *
11  * Written by Christopher Hoover <ch@hpl.hp.com>
12  * Based on fragments of previous driver by Russell King et al.
13  *
14  * Modified for LH7A404 from ohci-sa1111.c
15  *  by Durgesh Pattamatta <pattamattad@sharpsec.com>
16  *
17  * Modified for PNX8550 from ohci-sa1111.c and sa-omap.c
18  *  by Vitaly Wool <vitalywool@gmail.com>
19  *
20  * This file is licenced under the GPL.
21  */
22 
23 #include <linux/device.h>
24 #include <linux/platform_device.h>
25 #include <asm/mach-pnx8550/usb.h>
26 #include <asm/mach-pnx8550/int.h>
27 #include <asm/mach-pnx8550/pci.h>
28 
29 #ifndef CONFIG_PNX8550
30 #error "This file is PNX8550 bus glue.  CONFIG_PNX8550 must be defined."
31 #endif
32 
33 extern int usb_disabled(void);
34 
35 /*-------------------------------------------------------------------------*/
36 
pnx8550_start_hc(struct platform_device * dev)37 static void pnx8550_start_hc(struct platform_device *dev)
38 {
39 	/*
40 	 * Set register CLK48CTL to enable and 48MHz
41 	 */
42 	outl(0x00000003, PCI_BASE | 0x0004770c);
43 
44 	/*
45 	 * Set register CLK12CTL to enable and 48MHz
46 	 */
47 	outl(0x00000003, PCI_BASE | 0x00047710);
48 
49 	udelay(100);
50 }
51 
pnx8550_stop_hc(struct platform_device * dev)52 static void pnx8550_stop_hc(struct platform_device *dev)
53 {
54 	udelay(10);
55 }
56 
57 
58 /*-------------------------------------------------------------------------*/
59 
60 /* configure so an HC device and id are always provided */
61 /* always called with process context; sleeping is OK */
62 
63 
64 /**
65  * usb_hcd_pnx8550_probe - initialize pnx8550-based HCDs
66  * Context: !in_interrupt()
67  *
68  * Allocates basic resources for this USB host controller, and
69  * then invokes the start() method for the HCD associated with it
70  * through the hotplug entry's driver_data.
71  *
72  */
usb_hcd_pnx8550_probe(const struct hc_driver * driver,struct platform_device * dev)73 int usb_hcd_pnx8550_probe (const struct hc_driver *driver,
74 			  struct platform_device *dev)
75 {
76 	int retval;
77 	struct usb_hcd *hcd;
78 
79 	if (dev->resource[0].flags != IORESOURCE_MEM ||
80 			dev->resource[1].flags != IORESOURCE_IRQ) {
81 		dev_err (&dev->dev,"invalid resource type\n");
82 		return -ENOMEM;
83 	}
84 
85 	hcd = usb_create_hcd (driver, &dev->dev, "pnx8550");
86 	if (!hcd)
87 		return -ENOMEM;
88 	hcd->rsrc_start = dev->resource[0].start;
89 	hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
90 
91 	if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
92 		dev_err(&dev->dev, "request_mem_region [0x%08llx, 0x%08llx] "
93 				"failed\n", hcd->rsrc_start, hcd->rsrc_len);
94 		retval = -EBUSY;
95 		goto err1;
96 	}
97 
98 	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
99 	if (!hcd->regs) {
100 		dev_err(&dev->dev, "ioremap [[0x%08llx, 0x%08llx] failed\n",
101 				hcd->rsrc_start, hcd->rsrc_len);
102 		retval = -ENOMEM;
103 		goto err2;
104 	}
105 
106 	pnx8550_start_hc(dev);
107 
108 	ohci_hcd_init(hcd_to_ohci(hcd));
109 
110 	retval = usb_add_hcd(hcd, dev->resource[1].start, 0);
111 	if (retval == 0)
112 		return retval;
113 
114 	pnx8550_stop_hc(dev);
115 	iounmap(hcd->regs);
116  err2:
117 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
118  err1:
119 	usb_put_hcd(hcd);
120 	return retval;
121 }
122 
123 
124 /* may be called without controller electrically present */
125 /* may be called with controller, bus, and devices active */
126 
127 /**
128  * usb_hcd_pnx8550_remove - shutdown processing for pnx8550-based HCDs
129  * @dev: USB Host Controller being removed
130  * Context: !in_interrupt()
131  *
132  * Reverses the effect of usb_hcd_pnx8550_probe(), first invoking
133  * the HCD's stop() method.  It is always called from a thread
134  * context, normally "rmmod", "apmd", or something similar.
135  *
136  */
usb_hcd_pnx8550_remove(struct usb_hcd * hcd,struct platform_device * dev)137 void usb_hcd_pnx8550_remove (struct usb_hcd *hcd, struct platform_device *dev)
138 {
139 	usb_remove_hcd(hcd);
140 	pnx8550_stop_hc(dev);
141 	iounmap(hcd->regs);
142 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
143 	usb_put_hcd(hcd);
144 }
145 
146 /*-------------------------------------------------------------------------*/
147 
148 static int __devinit
ohci_pnx8550_start(struct usb_hcd * hcd)149 ohci_pnx8550_start (struct usb_hcd *hcd)
150 {
151 	struct ohci_hcd	*ohci = hcd_to_ohci (hcd);
152 	int		ret;
153 
154 	ohci_dbg (ohci, "ohci_pnx8550_start, ohci:%p", ohci);
155 
156 	if ((ret = ohci_init(ohci)) < 0)
157 		return ret;
158 
159 	if ((ret = ohci_run (ohci)) < 0) {
160 		err ("can't start %s", hcd->self.bus_name);
161 		ohci_stop (hcd);
162 		return ret;
163 	}
164 
165 	return 0;
166 }
167 
168 /*-------------------------------------------------------------------------*/
169 
170 static const struct hc_driver ohci_pnx8550_hc_driver = {
171 	.description =		hcd_name,
172 	.product_desc =		"PNX8550 OHCI",
173 	.hcd_priv_size =	sizeof(struct ohci_hcd),
174 
175 	/*
176 	 * generic hardware linkage
177 	 */
178 	.irq =			ohci_irq,
179 	.flags =		HCD_USB11 | HCD_MEMORY,
180 
181 	/*
182 	 * basic lifecycle operations
183 	 */
184 	.start =		ohci_pnx8550_start,
185 	.stop =			ohci_stop,
186 
187 	/*
188 	 * managing i/o requests and associated device resources
189 	 */
190 	.urb_enqueue =		ohci_urb_enqueue,
191 	.urb_dequeue =		ohci_urb_dequeue,
192 	.endpoint_disable =	ohci_endpoint_disable,
193 
194 	/*
195 	 * scheduling support
196 	 */
197 	.get_frame_number =	ohci_get_frame,
198 
199 	/*
200 	 * root hub support
201 	 */
202 	.hub_status_data =	ohci_hub_status_data,
203 	.hub_control =		ohci_hub_control,
204 #ifdef	CONFIG_PM
205 	.bus_suspend =		ohci_bus_suspend,
206 	.bus_resume =		ohci_bus_resume,
207 #endif
208 	.start_port_reset =	ohci_start_port_reset,
209 };
210 
211 /*-------------------------------------------------------------------------*/
212 
ohci_hcd_pnx8550_drv_probe(struct platform_device * pdev)213 static int ohci_hcd_pnx8550_drv_probe(struct platform_device *pdev)
214 {
215 	int ret;
216 
217 	if (usb_disabled())
218 		return -ENODEV;
219 
220 	ret = usb_hcd_pnx8550_probe(&ohci_pnx8550_hc_driver, pdev);
221 	return ret;
222 }
223 
ohci_hcd_pnx8550_drv_remove(struct platform_device * pdev)224 static int ohci_hcd_pnx8550_drv_remove(struct platform_device *pdev)
225 {
226 	struct usb_hcd *hcd = platform_get_drvdata(pdev);
227 
228 	usb_hcd_pnx8550_remove(hcd, pdev);
229 	return 0;
230 }
231 
232 MODULE_ALIAS("platform:pnx8550-ohci");
233 
234 static struct platform_driver ohci_hcd_pnx8550_driver = {
235 	.driver = {
236 		.name	= "pnx8550-ohci",
237 		.owner	= THIS_MODULE,
238 	},
239 	.probe		= ohci_hcd_pnx8550_drv_probe,
240 	.remove		= ohci_hcd_pnx8550_drv_remove,
241 };
242 
243