1 /* 2 * EHCI HCD (Host Controller Driver) PCI Bus Glue. 3 * 4 * Copyright (c) 2000-2004 by David Brownell 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms of the GNU General Public License as published by the 8 * Free Software Foundation; either version 2 of the License, or (at your 9 * option) any later version. 10 * 11 * This program is distributed in the hope that it will be useful, but 12 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 13 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 14 * for more details. 15 * 16 * You should have received a copy of the GNU General Public License 17 * along with this program; if not, write to the Free Software Foundation, 18 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 19 */ 20 21 #include <linux/kernel.h> 22 #include <linux/module.h> 23 #include <linux/pci.h> 24 #include <linux/usb.h> 25 #include <linux/usb/hcd.h> 26 27 #include "ehci.h" 28 #include "pci-quirks.h" 29 30 #define DRIVER_DESC "EHCI PCI platform driver" 31 32 static const char hcd_name[] = "ehci-pci"; 33 34 /* defined here to avoid adding to pci_ids.h for single instance use */ 35 #define PCI_DEVICE_ID_INTEL_CE4100_USB 0x2e70 36 37 /*-------------------------------------------------------------------------*/ 38 #define PCI_DEVICE_ID_INTEL_QUARK_X1000_SOC 0x0939 is_intel_quark_x1000(struct pci_dev * pdev)39 static inline bool is_intel_quark_x1000(struct pci_dev *pdev) 40 { 41 return pdev->vendor == PCI_VENDOR_ID_INTEL && 42 pdev->device == PCI_DEVICE_ID_INTEL_QUARK_X1000_SOC; 43 } 44 45 /* 46 * This is the list of PCI IDs for the devices that have EHCI USB class and 47 * specific drivers for that. One of the example is a ChipIdea device installed 48 * on some Intel MID platforms. 49 */ 50 static const struct pci_device_id bypass_pci_id_table[] = { 51 /* ChipIdea on Intel MID platform */ 52 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0811), }, 53 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0829), }, 54 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0xe006), }, 55 {} 56 }; 57 is_bypassed_id(struct pci_dev * pdev)58 static inline bool is_bypassed_id(struct pci_dev *pdev) 59 { 60 return !!pci_match_id(bypass_pci_id_table, pdev); 61 } 62 63 /* 64 * 0x84 is the offset of in/out threshold register, 65 * and it is the same offset as the register of 'hostpc'. 66 */ 67 #define intel_quark_x1000_insnreg01 hostpc 68 69 /* Maximum usable threshold value is 0x7f dwords for both IN and OUT */ 70 #define INTEL_QUARK_X1000_EHCI_MAX_THRESHOLD 0x007f007f 71 72 /* called after powerup, by probe or system-pm "wakeup" */ ehci_pci_reinit(struct ehci_hcd * ehci,struct pci_dev * pdev)73 static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev) 74 { 75 int retval; 76 77 /* we expect static quirk code to handle the "extended capabilities" 78 * (currently just BIOS handoff) allowed starting with EHCI 0.96 79 */ 80 81 /* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */ 82 retval = pci_set_mwi(pdev); 83 if (!retval) 84 ehci_dbg(ehci, "MWI active\n"); 85 86 /* Reset the threshold limit */ 87 if (is_intel_quark_x1000(pdev)) { 88 /* 89 * For the Intel QUARK X1000, raise the I/O threshold to the 90 * maximum usable value in order to improve performance. 91 */ 92 ehci_writel(ehci, INTEL_QUARK_X1000_EHCI_MAX_THRESHOLD, 93 ehci->regs->intel_quark_x1000_insnreg01); 94 } 95 96 return 0; 97 } 98 99 /* called during probe() after chip reset completes */ ehci_pci_setup(struct usb_hcd * hcd)100 static int ehci_pci_setup(struct usb_hcd *hcd) 101 { 102 struct ehci_hcd *ehci = hcd_to_ehci(hcd); 103 struct pci_dev *pdev = to_pci_dev(hcd->self.controller); 104 u32 temp; 105 int retval; 106 107 ehci->caps = hcd->regs; 108 109 /* 110 * ehci_init() causes memory for DMA transfers to be 111 * allocated. Thus, any vendor-specific workarounds based on 112 * limiting the type of memory used for DMA transfers must 113 * happen before ehci_setup() is called. 114 * 115 * Most other workarounds can be done either before or after 116 * init and reset; they are located here too. 117 */ 118 switch (pdev->vendor) { 119 case PCI_VENDOR_ID_TOSHIBA_2: 120 /* celleb's companion chip */ 121 if (pdev->device == 0x01b5) { 122 #ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO 123 ehci->big_endian_mmio = 1; 124 #else 125 ehci_warn(ehci, 126 "unsupported big endian Toshiba quirk\n"); 127 #endif 128 } 129 break; 130 case PCI_VENDOR_ID_NVIDIA: 131 /* NVidia reports that certain chips don't handle 132 * QH, ITD, or SITD addresses above 2GB. (But TD, 133 * data buffer, and periodic schedule are normal.) 134 */ 135 switch (pdev->device) { 136 case 0x003c: /* MCP04 */ 137 case 0x005b: /* CK804 */ 138 case 0x00d8: /* CK8 */ 139 case 0x00e8: /* CK8S */ 140 if (pci_set_consistent_dma_mask(pdev, 141 DMA_BIT_MASK(31)) < 0) 142 ehci_warn(ehci, "can't enable NVidia " 143 "workaround for >2GB RAM\n"); 144 break; 145 146 /* Some NForce2 chips have problems with selective suspend; 147 * fixed in newer silicon. 148 */ 149 case 0x0068: 150 if (pdev->revision < 0xa4) 151 ehci->no_selective_suspend = 1; 152 break; 153 } 154 break; 155 case PCI_VENDOR_ID_INTEL: 156 if (pdev->device == PCI_DEVICE_ID_INTEL_CE4100_USB) 157 hcd->has_tt = 1; 158 break; 159 case PCI_VENDOR_ID_TDI: 160 if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) 161 hcd->has_tt = 1; 162 break; 163 case PCI_VENDOR_ID_AMD: 164 /* AMD PLL quirk */ 165 if (usb_amd_find_chipset_info()) 166 ehci->amd_pll_fix = 1; 167 /* AMD8111 EHCI doesn't work, according to AMD errata */ 168 if (pdev->device == 0x7463) { 169 ehci_info(ehci, "ignoring AMD8111 (errata)\n"); 170 retval = -EIO; 171 goto done; 172 } 173 174 /* 175 * EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may 176 * read/write memory space which does not belong to it when 177 * there is NULL pointer with T-bit set to 1 in the frame list 178 * table. To avoid the issue, the frame list link pointer 179 * should always contain a valid pointer to a inactive qh. 180 */ 181 if (pdev->device == 0x7808) { 182 ehci->use_dummy_qh = 1; 183 ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround\n"); 184 } 185 break; 186 case PCI_VENDOR_ID_VIA: 187 if (pdev->device == 0x3104 && (pdev->revision & 0xf0) == 0x60) { 188 u8 tmp; 189 190 /* The VT6212 defaults to a 1 usec EHCI sleep time which 191 * hogs the PCI bus *badly*. Setting bit 5 of 0x4B makes 192 * that sleep time use the conventional 10 usec. 193 */ 194 pci_read_config_byte(pdev, 0x4b, &tmp); 195 if (tmp & 0x20) 196 break; 197 pci_write_config_byte(pdev, 0x4b, tmp | 0x20); 198 } 199 break; 200 case PCI_VENDOR_ID_ATI: 201 /* AMD PLL quirk */ 202 if (usb_amd_find_chipset_info()) 203 ehci->amd_pll_fix = 1; 204 205 /* 206 * EHCI controller on AMD SB700/SB800/Hudson-2/3 platforms may 207 * read/write memory space which does not belong to it when 208 * there is NULL pointer with T-bit set to 1 in the frame list 209 * table. To avoid the issue, the frame list link pointer 210 * should always contain a valid pointer to a inactive qh. 211 */ 212 if (pdev->device == 0x4396) { 213 ehci->use_dummy_qh = 1; 214 ehci_info(ehci, "applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround\n"); 215 } 216 /* SB600 and old version of SB700 have a bug in EHCI controller, 217 * which causes usb devices lose response in some cases. 218 */ 219 if ((pdev->device == 0x4386 || pdev->device == 0x4396) && 220 usb_amd_hang_symptom_quirk()) { 221 u8 tmp; 222 ehci_info(ehci, "applying AMD SB600/SB700 USB freeze workaround\n"); 223 pci_read_config_byte(pdev, 0x53, &tmp); 224 pci_write_config_byte(pdev, 0x53, tmp | (1<<3)); 225 } 226 break; 227 case PCI_VENDOR_ID_NETMOS: 228 /* MosChip frame-index-register bug */ 229 ehci_info(ehci, "applying MosChip frame-index workaround\n"); 230 ehci->frame_index_bug = 1; 231 break; 232 } 233 234 /* optional debug port, normally in the first BAR */ 235 temp = pci_find_capability(pdev, PCI_CAP_ID_DBG); 236 if (temp) { 237 pci_read_config_dword(pdev, temp, &temp); 238 temp >>= 16; 239 if (((temp >> 13) & 7) == 1) { 240 u32 hcs_params = ehci_readl(ehci, 241 &ehci->caps->hcs_params); 242 243 temp &= 0x1fff; 244 ehci->debug = hcd->regs + temp; 245 temp = ehci_readl(ehci, &ehci->debug->control); 246 ehci_info(ehci, "debug port %d%s\n", 247 HCS_DEBUG_PORT(hcs_params), 248 (temp & DBGP_ENABLED) ? " IN USE" : ""); 249 if (!(temp & DBGP_ENABLED)) 250 ehci->debug = NULL; 251 } 252 } 253 254 retval = ehci_setup(hcd); 255 if (retval) 256 return retval; 257 258 /* These workarounds need to be applied after ehci_setup() */ 259 switch (pdev->vendor) { 260 case PCI_VENDOR_ID_NEC: 261 case PCI_VENDOR_ID_INTEL: 262 case PCI_VENDOR_ID_AMD: 263 ehci->need_io_watchdog = 0; 264 break; 265 case PCI_VENDOR_ID_NVIDIA: 266 switch (pdev->device) { 267 /* MCP89 chips on the MacBookAir3,1 give EPROTO when 268 * fetching device descriptors unless LPM is disabled. 269 * There are also intermittent problems enumerating 270 * devices with PPCD enabled. 271 */ 272 case 0x0d9d: 273 ehci_info(ehci, "disable ppcd for nvidia mcp89\n"); 274 ehci->has_ppcd = 0; 275 ehci->command &= ~CMD_PPCEE; 276 break; 277 } 278 break; 279 } 280 281 /* at least the Genesys GL880S needs fixup here */ 282 temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params); 283 temp &= 0x0f; 284 if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) { 285 ehci_dbg(ehci, "bogus port configuration: " 286 "cc=%d x pcc=%d < ports=%d\n", 287 HCS_N_CC(ehci->hcs_params), 288 HCS_N_PCC(ehci->hcs_params), 289 HCS_N_PORTS(ehci->hcs_params)); 290 291 switch (pdev->vendor) { 292 case 0x17a0: /* GENESYS */ 293 /* GL880S: should be PORTS=2 */ 294 temp |= (ehci->hcs_params & ~0xf); 295 ehci->hcs_params = temp; 296 break; 297 case PCI_VENDOR_ID_NVIDIA: 298 /* NF4: should be PCC=10 */ 299 break; 300 } 301 } 302 303 /* Serial Bus Release Number is at PCI 0x60 offset */ 304 if (pdev->vendor == PCI_VENDOR_ID_STMICRO 305 && pdev->device == PCI_DEVICE_ID_STMICRO_USB_HOST) 306 ; /* ConneXT has no sbrn register */ 307 else 308 pci_read_config_byte(pdev, 0x60, &ehci->sbrn); 309 310 /* Keep this around for a while just in case some EHCI 311 * implementation uses legacy PCI PM support. This test 312 * can be removed on 17 Dec 2009 if the dev_warn() hasn't 313 * been triggered by then. 314 */ 315 if (!device_can_wakeup(&pdev->dev)) { 316 u16 port_wake; 317 318 pci_read_config_word(pdev, 0x62, &port_wake); 319 if (port_wake & 0x0001) { 320 dev_warn(&pdev->dev, "Enabling legacy PCI PM\n"); 321 device_set_wakeup_capable(&pdev->dev, 1); 322 } 323 } 324 325 #ifdef CONFIG_PM 326 if (ehci->no_selective_suspend && device_can_wakeup(&pdev->dev)) 327 ehci_warn(ehci, "selective suspend/wakeup unavailable\n"); 328 #endif 329 330 retval = ehci_pci_reinit(ehci, pdev); 331 done: 332 return retval; 333 } 334 335 /*-------------------------------------------------------------------------*/ 336 337 #ifdef CONFIG_PM 338 339 /* suspend/resume, section 4.3 */ 340 341 /* These routines rely on the PCI bus glue 342 * to handle powerdown and wakeup, and currently also on 343 * transceivers that don't need any software attention to set up 344 * the right sort of wakeup. 345 * Also they depend on separate root hub suspend/resume. 346 */ 347 ehci_pci_resume(struct usb_hcd * hcd,bool hibernated)348 static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated) 349 { 350 struct ehci_hcd *ehci = hcd_to_ehci(hcd); 351 struct pci_dev *pdev = to_pci_dev(hcd->self.controller); 352 353 if (ehci_resume(hcd, hibernated) != 0) 354 (void) ehci_pci_reinit(ehci, pdev); 355 return 0; 356 } 357 358 #else 359 360 #define ehci_suspend NULL 361 #define ehci_pci_resume NULL 362 #endif /* CONFIG_PM */ 363 364 static struct hc_driver __read_mostly ehci_pci_hc_driver; 365 366 static const struct ehci_driver_overrides pci_overrides __initconst = { 367 .reset = ehci_pci_setup, 368 }; 369 370 /*-------------------------------------------------------------------------*/ 371 ehci_pci_probe(struct pci_dev * pdev,const struct pci_device_id * id)372 static int ehci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) 373 { 374 if (is_bypassed_id(pdev)) 375 return -ENODEV; 376 return usb_hcd_pci_probe(pdev, id); 377 } 378 ehci_pci_remove(struct pci_dev * pdev)379 static void ehci_pci_remove(struct pci_dev *pdev) 380 { 381 pci_clear_mwi(pdev); 382 usb_hcd_pci_remove(pdev); 383 } 384 385 /* PCI driver selection metadata; PCI hotplugging uses this */ 386 static const struct pci_device_id pci_ids [] = { { 387 /* handle any USB 2.0 EHCI controller */ 388 PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0), 389 .driver_data = (unsigned long) &ehci_pci_hc_driver, 390 }, { 391 PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_HOST), 392 .driver_data = (unsigned long) &ehci_pci_hc_driver, 393 }, 394 { /* end: all zeroes */ } 395 }; 396 MODULE_DEVICE_TABLE(pci, pci_ids); 397 398 /* pci driver glue; this is a "new style" PCI driver module */ 399 static struct pci_driver ehci_pci_driver = { 400 .name = (char *) hcd_name, 401 .id_table = pci_ids, 402 403 .probe = ehci_pci_probe, 404 .remove = ehci_pci_remove, 405 .shutdown = usb_hcd_pci_shutdown, 406 407 #ifdef CONFIG_PM 408 .driver = { 409 .pm = &usb_hcd_pci_pm_ops 410 }, 411 #endif 412 }; 413 ehci_pci_init(void)414 static int __init ehci_pci_init(void) 415 { 416 if (usb_disabled()) 417 return -ENODEV; 418 419 pr_info("%s: " DRIVER_DESC "\n", hcd_name); 420 421 ehci_init_driver(&ehci_pci_hc_driver, &pci_overrides); 422 423 /* Entries for the PCI suspend/resume callbacks are special */ 424 ehci_pci_hc_driver.pci_suspend = ehci_suspend; 425 ehci_pci_hc_driver.pci_resume = ehci_pci_resume; 426 427 return pci_register_driver(&ehci_pci_driver); 428 } 429 module_init(ehci_pci_init); 430 ehci_pci_cleanup(void)431 static void __exit ehci_pci_cleanup(void) 432 { 433 pci_unregister_driver(&ehci_pci_driver); 434 } 435 module_exit(ehci_pci_cleanup); 436 437 MODULE_DESCRIPTION(DRIVER_DESC); 438 MODULE_AUTHOR("David Brownell"); 439 MODULE_AUTHOR("Alan Stern"); 440 MODULE_LICENSE("GPL"); 441