• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1/*
2 * SAMSUNG XYREF5260 board device tree source
3 *
4 * Copyright (c) 2013 Samsung Electronics Co., Ltd.
5 *		http://www.samsung.com
6 *
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
10*/
11
12/dts-v1/;
13#include "exynos5260.dtsi"
14
15/ {
16	model = "SAMSUNG XYREF5260 board based on EXYNOS5260";
17	compatible = "samsung,xyref5260", "samsung,exynos5260", "samsung,exynos5";
18
19	memory@20000000 {
20		device_type = "memory";
21		reg = <0x20000000 0x80000000>;
22	};
23
24	chosen {
25		bootargs = "console=ttySAC2,115200";
26	};
27
28	fin_pll: xxti {
29		compatible = "fixed-clock";
30		clock-frequency = <24000000>;
31		clock-output-names = "fin_pll";
32		#clock-cells = <0>;
33	};
34
35	xrtcxti: xrtcxti {
36		compatible = "fixed-clock";
37		clock-frequency = <32768>;
38		clock-output-names = "xrtcxti";
39		#clock-cells = <0>;
40	};
41};
42
43&pinctrl_0 {
44	hdmi_hpd_irq: hdmi-hpd-irq {
45		samsung,pins = "gpx3-7";
46		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
47		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
48		samsung,pin-drv = <EXYNOS5260_PIN_DRV_LV1>;
49	};
50};
51
52&uart0 {
53	status = "okay";
54};
55
56&uart1 {
57	status = "okay";
58};
59
60&uart2 {
61	status = "okay";
62};
63
64&uart3 {
65	status = "okay";
66};
67
68&mmc_0 {
69	status = "okay";
70	broken-cd;
71	bypass-smu;
72	cap-mmc-highspeed;
73	supports-hs200-mode; /* 200 MHz */
74	card-detect-delay = <200>;
75	samsung,dw-mshc-ciu-div = <3>;
76	samsung,dw-mshc-sdr-timing = <0 4>;
77	samsung,dw-mshc-ddr-timing = <0 2>;
78	pinctrl-names = "default";
79	pinctrl-0 = <&sd0_rdqs &sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
80	bus-width = <8>;
81};
82
83&mmc_2 {
84	status = "okay";
85	cap-sd-highspeed;
86	card-detect-delay = <200>;
87	samsung,dw-mshc-ciu-div = <3>;
88	samsung,dw-mshc-sdr-timing = <2 3>;
89	samsung,dw-mshc-ddr-timing = <1 2>;
90	pinctrl-names = "default";
91	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
92	bus-width = <4>;
93	disable-wp;
94};
95