• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1/*
2 * Copyright 2014-2017 Toradex AG
3 * Copyright 2012 Freescale Semiconductor, Inc.
4 * Copyright 2011 Linaro Ltd.
5 *
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
9 * whole.
10 *
11 *  a) This file is free software; you can redistribute it and/or
12 *     modify it under the terms of the GNU General Public License
13 *     version 2 as published by the Free Software Foundation.
14 *
15 *     This file is distributed in the hope that it will be useful,
16 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
17 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
18 *     GNU General Public License for more details.
19 *
20 * Or, alternatively,
21 *
22 *  b) Permission is hereby granted, free of charge, to any person
23 *     obtaining a copy of this software and associated documentation
24 *     files (the "Software"), to deal in the Software without
25 *     restriction, including without limitation the rights to use,
26 *     copy, modify, merge, publish, distribute, sublicense, and/or
27 *     sell copies of the Software, and to permit persons to whom the
28 *     Software is furnished to do so, subject to the following
29 *     conditions:
30 *
31 *     The above copyright notice and this permission notice shall be
32 *     included in all copies or substantial portions of the Software.
33 *
34 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
35 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
36 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
37 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
38 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
39 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
40 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
41 *     OTHER DEALINGS IN THE SOFTWARE.
42 */
43
44/dts-v1/;
45
46#include <dt-bindings/gpio/gpio.h>
47#include <dt-bindings/input/input.h>
48#include <dt-bindings/interrupt-controller/irq.h>
49#include "imx6q.dtsi"
50#include "imx6qdl-apalis.dtsi"
51
52/ {
53	model = "Toradex Apalis iMX6Q/D Module on Ixora Carrier Board V1.1";
54	compatible = "toradex,apalis_imx6q-ixora-v1.1",
55		     "toradex,apalis_imx6q-ixora", "toradex,apalis_imx6q",
56		     "fsl,imx6q";
57
58	aliases {
59		i2c0 = &i2c1;
60		i2c1 = &i2c3;
61		i2c2 = &i2c2;
62		rtc0 = &rtc_i2c;
63		rtc1 = &snvs_rtc;
64	};
65
66	gpio-keys {
67		compatible = "gpio-keys";
68		pinctrl-names = "default";
69		pinctrl-0 = <&pinctrl_gpio_keys>;
70
71		wakeup {
72			label = "Wake-Up";
73			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
74			linux,code = <KEY_WAKEUP>;
75			debounce-interval = <10>;
76			wakeup-source;
77		};
78	};
79
80	lcd_display: display@di0 {
81		compatible = "fsl,imx-parallel-display";
82		#address-cells = <1>;
83		#size-cells = <0>;
84		interface-pix-fmt = "rgb24";
85		pinctrl-names = "default";
86		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
87		status = "okay";
88
89		port@0 {
90			reg = <0>;
91
92			lcd_display_in: endpoint {
93				remote-endpoint = <&ipu1_di1_disp1>;
94			};
95		};
96
97		port@1 {
98			reg = <1>;
99
100			lcd_display_out: endpoint {
101				remote-endpoint = <&lcd_panel_in>;
102			};
103		};
104	};
105
106	panel: panel {
107		/*
108		 * edt,et057090dhu: EDT 5.7" LCD TFT
109		 * edt,et070080dh6: EDT 7.0" LCD TFT
110		 */
111		compatible = "edt,et057090dhu";
112		backlight = <&backlight>;
113
114		port {
115			lcd_panel_in: endpoint {
116				remote-endpoint = <&lcd_display_out>;
117			};
118		};
119	};
120
121	leds {
122		compatible = "gpio-leds";
123
124		pinctrl-names = "default";
125		pinctrl-0 = <&pinctrl_leds_ixora>;
126
127		led4-green {
128			label = "LED_4_GREEN";
129			gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
130		};
131
132		led4-red {
133			label = "LED_4_RED";
134			gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
135		};
136
137		led5-green {
138			label = "LED_5_GREEN";
139			gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
140		};
141
142		led5-red {
143			label = "LED_5_RED";
144			gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
145		};
146	};
147};
148
149&backlight {
150	brightness-levels = <0 127 191 223 239 247 251 255>;
151	default-brightness-level = <1>;
152	status = "okay";
153};
154
155&can1 {
156	status = "okay";
157};
158
159&can2 {
160	status = "okay";
161};
162
163&hdmi {
164	status = "okay";
165};
166
167/* I2C1_SDA/SCL on MXM3 209/211 (e.g. RTC on carrier board) */
168&i2c1 {
169	status = "okay";
170
171	/* M41T0M6 real time clock on carrier board */
172	rtc_i2c: rtc@68 {
173		compatible = "st,m41t00";
174		reg = <0x68>;
175	};
176};
177
178/*
179 * I2C3_SDA/SCL (CAM) on MXM3 pin 201/203 (e.g. camera sensor on carrier
180 * board)
181 */
182&i2c3 {
183	status = "okay";
184};
185
186&ipu1_di1_disp1 {
187	remote-endpoint = <&lcd_display_in>;
188};
189
190&ldb {
191	status = "okay";
192};
193
194&pcie {
195	/* active-high meaning opposite of regular PERST# active-low polarity */
196	reset-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>;
197	reset-gpio-active-high;
198	status = "okay";
199};
200
201&pwm1 {
202	status = "okay";
203};
204
205&pwm2 {
206	status = "okay";
207};
208
209&pwm3 {
210	status = "okay";
211};
212
213&pwm4 {
214	status = "okay";
215};
216
217&reg_usb_otg_vbus {
218	status = "okay";
219};
220
221&reg_usb_host_vbus {
222	status = "okay";
223};
224
225&sata {
226	status = "okay";
227};
228
229&sound_spdif {
230	status = "okay";
231};
232
233&spdif {
234	status = "okay";
235};
236
237&uart1 {
238	status = "okay";
239};
240
241&uart2 {
242	status = "okay";
243};
244
245&uart4 {
246	status = "okay";
247};
248
249&uart5 {
250	status = "okay";
251};
252
253&usbh1 {
254	vbus-supply = <&reg_usb_host_vbus>;
255	status = "okay";
256};
257
258&usbotg {
259	vbus-supply = <&reg_usb_otg_vbus>;
260	status = "okay";
261};
262
263/* MMC1 */
264&usdhc1 {
265	pinctrl-names = "default";
266	pinctrl-0 = <&pinctrl_usdhc1_4bit &pinctrl_mmc_cd>;
267	cd-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
268	bus-width = <4>;
269	status = "okay";
270};
271
272&iomuxc {
273	/*
274	 * Mux the Apalis GPIOs
275	 */
276	pinctrl-names = "default";
277	pinctrl-0 = <&pinctrl_apalis_gpio1 &pinctrl_apalis_gpio2
278		     &pinctrl_apalis_gpio3 &pinctrl_apalis_gpio4
279		     &pinctrl_apalis_gpio5 &pinctrl_apalis_gpio6
280		     &pinctrl_apalis_gpio7 &pinctrl_apalis_gpio8
281		    >;
282
283	pinctrl_leds_ixora: ledsixoragrp {
284		fsl,pins = <
285			MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x1b0b0
286			MX6QDL_PAD_SD2_DAT3__GPIO1_IO12 0x1b0b0
287			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0
288			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
289		>;
290	};
291};
292