• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1/*
2 * Copyright 2015 Gábor Nyers
3 *
4 * Gábor Nyers <gabor.nyers@gmail.com>
5 *
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
9 * whole.
10 *
11 *  a) This file is free software; you can redistribute it and/or
12 *     modify it under the terms of the GNU General Public License as
13 *     published by the Free Software Foundation; either version 2 of the
14 *     License, or (at your option) any later version.
15 *
16 *     This file is distributed in the hope that it will be useful,
17 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
18 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19 *     GNU General Public License for more details.
20 *
21 * Or, alternatively,
22 *
23 *  b) Permission is hereby granted, free of charge, to any person
24 *     obtaining a copy of this software and associated documentation
25 *     files (the "Software"), to deal in the Software without
26 *     restriction, including without limitation the rights to use,
27 *     copy, modify, merge, publish, distribute, sublicense, and/or
28 *     sell copies of the Software, and to permit persons to whom the
29 *     Software is furnished to do so, subject to the following
30 *     conditions:
31 *
32 *     The above copyright notice and this permission notice shall be
33 *     included in all copies or substantial portions of the Software.
34 *
35 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 *     OTHER DEALINGS IN THE SOFTWARE.
43 */
44
45/dts-v1/;
46#include "sun4i-a10.dtsi"
47#include "sunxi-common-regulators.dtsi"
48
49#include <dt-bindings/gpio/gpio.h>
50
51/ {
52	model = "Jesurun Q5";
53	compatible = "jesurun,q5", "allwinner,sun4i-a10";
54
55	aliases {
56		serial0 = &uart0;
57	};
58
59	chosen {
60		stdout-path = "serial0:115200n8";
61	};
62
63	leds {
64		compatible = "gpio-leds";
65		pinctrl-names = "default";
66		pinctrl-0 = <&led_pins_q5>;
67
68		green {
69			label = "q5:green:usr";
70			gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>;  /* PH20 */
71		};
72
73	};
74
75	reg_emac_3v3: emac-3v3 {
76		compatible = "regulator-fixed";
77		pinctrl-names = "default";
78		pinctrl-0 = <&emac_power_pin_q5>;
79		regulator-name = "emac-3v3";
80		regulator-min-microvolt = <3300000>;
81		regulator-max-microvolt = <3300000>;
82		startup-delay-us = <20000>;
83		enable-active-high;
84		gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>;   /* PH19 */
85	};
86};
87
88&ahci {
89	status = "okay";
90};
91
92&ehci0 {
93	status = "okay";
94};
95
96&ehci1 {
97	status = "okay";
98};
99
100&emac {
101	pinctrl-names = "default";
102	pinctrl-0 = <&emac_pins_a>;
103	phy = <&phy1>;
104	status = "okay";
105};
106
107&emac_sram {
108	status = "okay";
109};
110
111&i2c0 {
112	pinctrl-names = "default";
113	pinctrl-0 = <&i2c0_pins_a>;
114	status = "okay";
115
116	axp209: pmic@34 {
117		compatible = "x-powers,axp209";
118		reg = <0x34>;
119		interrupts = <0>;
120
121		interrupt-controller;
122		#interrupt-cells = <1>;
123	};
124};
125
126&ir0 {
127	pinctrl-names = "default";
128	pinctrl-0 = <&ir0_rx_pins_a>;
129	status = "okay";
130};
131
132&mdio {
133	phy-supply = <&reg_emac_3v3>;
134	status = "okay";
135
136	phy1: ethernet-phy@1 {
137		reg = <1>;
138	};
139};
140
141&mmc0 {
142	pinctrl-names = "default";
143	pinctrl-0 = <&mmc0_pins_a>;
144	vmmc-supply = <&reg_vcc3v3>;
145	bus-width = <4>;
146	cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
147	cd-inverted;
148	status = "okay";
149};
150
151&ohci0 {
152	status = "okay";
153};
154
155&ohci1 {
156	status = "okay";
157};
158
159&otg_sram {
160	status = "okay";
161};
162
163&pio {
164	emac_power_pin_q5: emac_power_pin@0 {
165		pins = "PH19";
166		function = "gpio_out";
167	};
168
169	led_pins_q5: led_pins@0 {
170		pins = "PH20";
171		function = "gpio_out";
172	};
173};
174
175&reg_usb0_vbus {
176	regulator-boot-on;
177	status = "okay";
178};
179
180&reg_usb1_vbus {
181	status = "okay";
182};
183
184&reg_usb2_vbus {
185	status = "okay";
186};
187
188&uart0 {
189	pinctrl-names = "default";
190	pinctrl-0 = <&uart0_pins_a>;
191	status = "okay";
192};
193
194&usb_otg {
195	dr_mode = "host";
196	status = "okay";
197};
198
199&usbphy {
200	usb0_vbus-supply = <&reg_usb0_vbus>;
201	usb1_vbus-supply = <&reg_usb1_vbus>;
202	usb2_vbus-supply = <&reg_usb2_vbus>;
203	status = "okay";
204};
205