1/* 2 * Copyright 2015 Hans de Goede <hdegoede@redhat.com> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * Or, alternatively, 20 * 21 * b) Permission is hereby granted, free of charge, to any person 22 * obtaining a copy of this software and associated documentation 23 * files (the "Software"), to deal in the Software without 24 * restriction, including without limitation the rights to use, 25 * copy, modify, merge, publish, distribute, sublicense, and/or 26 * sell copies of the Software, and to permit persons to whom the 27 * Software is furnished to do so, subject to the following 28 * conditions: 29 * 30 * The above copyright notice and this permission notice shall be 31 * included in all copies or substantial portions of the Software. 32 * 33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 40 * OTHER DEALINGS IN THE SOFTWARE. 41 */ 42 43/dts-v1/; 44#include "sun5i-a10s.dtsi" 45#include "sunxi-common-regulators.dtsi" 46#include <dt-bindings/gpio/gpio.h> 47 48/ { 49 model = "Auxtek t004 A10s hdmi tv-stick"; 50 compatible = "allwinner,auxtek-t004", "allwinner,sun5i-a10s"; 51 52 aliases { 53 serial0 = &uart0; 54 }; 55 56 chosen { 57 stdout-path = "serial0:115200n8"; 58 }; 59 60 leds { 61 compatible = "gpio-leds"; 62 pinctrl-names = "default"; 63 pinctrl-0 = <&led_pins_t004>; 64 65 red { 66 label = "t004-tv-dongle:red:usr"; 67 gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */ 68 default-state = "on"; 69 }; 70 }; 71 72 reg_vmmc1: vmmc1 { 73 compatible = "regulator-fixed"; 74 pinctrl-names = "default"; 75 pinctrl-0 = <&mmc1_vcc_en_pin_t004>; 76 regulator-name = "vmmc1"; 77 regulator-min-microvolt = <3300000>; 78 regulator-max-microvolt = <3300000>; 79 enable-active-high; 80 gpio = <&pio 1 18 GPIO_ACTIVE_HIGH>; /* PB18 */ 81 }; 82}; 83 84&ehci0 { 85 status = "okay"; 86}; 87 88&i2c0 { 89 pinctrl-names = "default"; 90 pinctrl-0 = <&i2c0_pins_a>; 91 status = "okay"; 92 93 axp152: pmic@30 { 94 compatible = "x-powers,axp152"; 95 reg = <0x30>; 96 interrupts = <0>; 97 interrupt-controller; 98 #interrupt-cells = <1>; 99 }; 100}; 101 102&mmc0 { 103 pinctrl-names = "default"; 104 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_t004>; 105 vmmc-supply = <®_vcc3v3>; 106 bus-width = <4>; 107 cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ 108 cd-inverted; 109 status = "okay"; 110}; 111 112&mmc1 { 113 pinctrl-names = "default"; 114 pinctrl-0 = <&mmc1_pins_a>; 115 vmmc-supply = <®_vmmc1>; 116 bus-width = <4>; 117 non-removable; 118 cap-sdio-irq; 119 status = "okay"; 120}; 121 122&ohci0 { 123 status = "okay"; 124}; 125 126&otg_sram { 127 status = "okay"; 128}; 129 130&pio { 131 usb0_id_detect_pin: usb0_id_detect_pin@0 { 132 pins = "PG12"; 133 function = "gpio_in"; 134 bias-pull-up; 135 }; 136 137 mmc0_cd_pin_t004: mmc0_cd_pin@0 { 138 pins = "PG1"; 139 function = "gpio_in"; 140 bias-pull-up; 141 }; 142 143 mmc1_vcc_en_pin_t004: mmc1_vcc_en_pin@0 { 144 pins = "PB18"; 145 function = "gpio_out"; 146 }; 147 148 led_pins_t004: led_pins@0 { 149 pins = "PB2"; 150 function = "gpio_out"; 151 drive-strength = <20>; 152 }; 153}; 154 155®_usb1_vbus { 156 gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ 157 status = "okay"; 158}; 159 160&uart0 { 161 pinctrl-names = "default"; 162 pinctrl-0 = <&uart0_pins_a>; 163 status = "okay"; 164}; 165 166&usb_otg { 167 dr_mode = "otg"; 168 status = "okay"; 169}; 170 171&usbphy { 172 pinctrl-names = "default"; 173 pinctrl-0 = <&usb0_id_detect_pin>; 174 usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ 175 usb1_vbus-supply = <®_usb1_vbus>; 176 status = "okay"; 177}; 178