1/* 2 * Copyright 2015 Marcus Cooper <codekipper@gmail.com> 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of the 12 * License, or (at your option) any later version. 13 * 14 * This file is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * Or, alternatively, 20 * 21 * b) Permission is hereby granted, free of charge, to any person 22 * obtaining a copy of this software and associated documentation 23 * files (the "Software"), to deal in the Software without 24 * restriction, including without limitation the rights to use, 25 * copy, modify, merge, publish, distribute, sublicense, and/or 26 * sell copies of the Software, and to permit persons to whom the 27 * Software is furnished to do so, subject to the following 28 * conditions: 29 * 30 * The above copyright notice and this permission notice shall be 31 * included in all copies or substantial portions of the Software. 32 * 33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, 34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, 38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 40 * OTHER DEALINGS IN THE SOFTWARE. 41 */ 42 43/dts-v1/; 44#include "sun6i-a31.dtsi" 45#include "sunxi-common-regulators.dtsi" 46 47#include <dt-bindings/gpio/gpio.h> 48 49/ { 50 model = "Mele I7 Quad top set box"; 51 compatible = "mele,i7", "allwinner,sun6i-a31"; 52 53 aliases { 54 serial0 = &uart0; 55 }; 56 57 chosen { 58 stdout-path = "serial0:115200n8"; 59 }; 60 61 leds { 62 compatible = "gpio-leds"; 63 pinctrl-names = "default"; 64 pinctrl-0 = <&led_pins_i7>; 65 66 blue { 67 label = "i7:blue:usr"; 68 gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; 69 }; 70 }; 71 72 sound { 73 compatible = "simple-audio-card"; 74 simple-audio-card,name = "On-board SPDIF"; 75 simple-audio-card,cpu { 76 sound-dai = <&spdif>; 77 }; 78 79 simple-audio-card,codec { 80 sound-dai = <&spdif_out>; 81 }; 82 }; 83 84 spdif_out: spdif-out { 85 #sound-dai-cells = <0>; 86 compatible = "linux,spdif-dit"; 87 }; 88}; 89 90&codec { 91 allwinner,audio-routing = 92 "Headphone", "HP"; 93 status = "okay"; 94}; 95 96&ehci0 { 97 status = "okay"; 98}; 99 100&ehci1 { 101 status = "okay"; 102}; 103 104&gmac { 105 pinctrl-names = "default"; 106 pinctrl-0 = <&gmac_pins_mii_a>; 107 phy = <&phy1>; 108 phy-mode = "mii"; 109 status = "okay"; 110 111 phy1: ethernet-phy@1 { 112 reg = <1>; 113 }; 114}; 115 116&ir { 117 pinctrl-names = "default"; 118 pinctrl-0 = <&ir_pins_a>; 119 status = "okay"; 120}; 121 122&mmc0 { 123 pinctrl-names = "default"; 124 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_i7>; 125 vmmc-supply = <®_vcc3v3>; 126 bus-width = <4>; 127 cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ 128 cd-inverted; 129 status = "okay"; 130}; 131 132&pio { 133 led_pins_i7: led_pins@0 { 134 pins = "PH13"; 135 function = "gpio_out"; 136 }; 137 138 mmc0_cd_pin_i7: mmc0_cd_pin@0 { 139 pins = "PH22"; 140 function = "gpio_in"; 141 bias-pull-up; 142 }; 143 144 usb1_vbus_pin_i7: usb1_vbus_pin@0 { 145 pins = "PC27"; 146 function = "gpio_out"; 147 }; 148}; 149 150®_usb1_vbus { 151 pinctrl-names = "default"; 152 pinctrl-0 = <&usb1_vbus_pin_i7>; 153 gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; 154 status = "okay"; 155}; 156 157&spdif { 158 pinctrl-names = "default"; 159 pinctrl-0 = <&spdif_pins_a>; 160 spdif-out = "okay"; 161 status = "okay"; 162}; 163 164&uart0 { 165 pinctrl-names = "default"; 166 pinctrl-0 = <&uart0_pins_a>; 167 status = "okay"; 168}; 169 170&usbphy { 171 usb1_vbus-supply = <®_usb1_vbus>; 172 status = "okay"; 173}; 174