• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1/*
2 * MPC8536 Silicon/SoC Device Tree Source (post include)
3 *
4 * Copyright 2011 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 *     * Redistributions of source code must retain the above copyright
9 *       notice, this list of conditions and the following disclaimer.
10 *     * Redistributions in binary form must reproduce the above copyright
11 *       notice, this list of conditions and the following disclaimer in the
12 *       documentation and/or other materials provided with the distribution.
13 *     * Neither the name of Freescale Semiconductor nor the
14 *       names of its contributors may be used to endorse or promote products
15 *       derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35&lbc {
36	#address-cells = <2>;
37	#size-cells = <1>;
38	compatible = "fsl,mpc8536-elbc", "fsl,elbc", "simple-bus";
39	interrupts = <19 2 0 0>;
40};
41
42/* controller at 0x8000 */
43&pci0 {
44	compatible = "fsl,mpc8540-pci";
45	device_type = "pci";
46	interrupts = <24 0x2 0 0>;
47	bus-range = <0 0xff>;
48	#interrupt-cells = <1>;
49	#size-cells = <2>;
50	#address-cells = <3>;
51};
52
53/* controller at 0x9000 */
54&pci1 {
55	compatible = "fsl,mpc8548-pcie";
56	device_type = "pci";
57	#size-cells = <2>;
58	#address-cells = <3>;
59	bus-range = <0 255>;
60	clock-frequency = <33333333>;
61	interrupts = <25 2 0 0>;
62
63	pcie@0 {
64		reg = <0 0 0 0 0>;
65		#interrupt-cells = <1>;
66		#size-cells = <2>;
67		#address-cells = <3>;
68		device_type = "pci";
69		interrupts = <25 2 0 0>;
70		interrupt-map-mask = <0xf800 0 0 7>;
71
72		interrupt-map = <
73			/* IDSEL 0x0 */
74			0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
75			0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
76			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
77			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
78			>;
79	};
80};
81
82/* controller at 0xa000 */
83&pci2 {
84	compatible = "fsl,mpc8548-pcie";
85	device_type = "pci";
86	#size-cells = <2>;
87	#address-cells = <3>;
88	bus-range = <0 255>;
89	clock-frequency = <33333333>;
90	interrupts = <26 2 0 0>;
91
92	pcie@0 {
93		reg = <0 0 0 0 0>;
94		#interrupt-cells = <1>;
95		#size-cells = <2>;
96		#address-cells = <3>;
97		device_type = "pci";
98		interrupts = <26 2 0 0>;
99		interrupt-map-mask = <0xf800 0 0 7>;
100		interrupt-map = <
101			/* IDSEL 0x0 */
102			0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
103			0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
104			0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
105			0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
106			>;
107	};
108};
109
110/* controller at 0xb000 */
111&pci3 {
112	compatible = "fsl,mpc8548-pcie";
113	device_type = "pci";
114	#size-cells = <2>;
115	#address-cells = <3>;
116	bus-range = <0 255>;
117	clock-frequency = <33333333>;
118	interrupts = <27 2 0 0>;
119
120	pcie@0 {
121		reg = <0 0 0 0 0>;
122		#interrupt-cells = <1>;
123		#size-cells = <2>;
124		#address-cells = <3>;
125		device_type = "pci";
126		interrupts = <27 2 0 0>;
127		interrupt-map-mask = <0xf800 0 0 7>;
128		interrupt-map = <
129			/* IDSEL 0x0 */
130			0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
131			0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
132			0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
133			0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
134			>;
135	};
136};
137&soc {
138	#address-cells = <1>;
139	#size-cells = <1>;
140	device_type = "soc";
141	compatible = "fsl,mpc8536-immr", "simple-bus";
142	bus-frequency = <0>;		// Filled out by uboot.
143
144	ecm-law@0 {
145		compatible = "fsl,ecm-law";
146		reg = <0x0 0x1000>;
147		fsl,num-laws = <12>;
148	};
149
150	ecm@1000 {
151		compatible = "fsl,mpc8536-ecm", "fsl,ecm";
152		reg = <0x1000 0x1000>;
153		interrupts = <17 2 0 0>;
154	};
155
156	memory-controller@2000 {
157		compatible = "fsl,mpc8536-memory-controller";
158		reg = <0x2000 0x1000>;
159		interrupts = <18 2 0 0>;
160	};
161
162/include/ "pq3-i2c-0.dtsi"
163/include/ "pq3-i2c-1.dtsi"
164/include/ "pq3-duart-0.dtsi"
165
166/include/ "pq3-espi-0.dtsi"
167	spi@7000 {
168		fsl,espi-num-chipselects = <4>;
169	};
170
171/include/ "pq3-gpio-0.dtsi"
172
173	/* mark compat w/8572 to get some erratum treatment */
174	gpio-controller@f000 {
175		compatible = "fsl,mpc8572-gpio";
176	};
177
178	sata@18000 {
179		compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
180		reg = <0x18000 0x1000>;
181		cell-index = <1>;
182		interrupts = <74 0x2 0 0>;
183	};
184
185	sata@19000 {
186		compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
187		reg = <0x19000 0x1000>;
188		cell-index = <2>;
189		interrupts = <41 0x2 0 0>;
190	};
191
192	L2: l2-cache-controller@20000 {
193		compatible = "fsl,mpc8536-l2-cache-controller";
194		reg = <0x20000 0x1000>;
195		cache-line-size = <32>;	// 32 bytes
196		cache-size = <0x80000>; // L2, 512K
197		interrupts = <16 2 0 0>;
198	};
199
200/include/ "pq3-dma-0.dtsi"
201/include/ "pq3-etsec1-0.dtsi"
202/include/ "pq3-etsec1-timer-0.dtsi"
203
204	usb@22000 {
205		compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
206		reg = <0x22000 0x1000>;
207		#address-cells = <1>;
208		#size-cells = <0>;
209		interrupts = <28 0x2 0 0>;
210	};
211
212	usb@23000 {
213		compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
214		reg = <0x23000 0x1000>;
215		#address-cells = <1>;
216		#size-cells = <0>;
217		interrupts = <46 0x2 0 0>;
218	};
219
220	ptp_clock@24e00 {
221		interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>;
222	};
223
224/include/ "pq3-etsec1-2.dtsi"
225
226	ethernet@26000 {
227		cell-index = <1>;
228	};
229
230	usb@2b000 {
231		compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
232		reg = <0x2b000 0x1000>;
233		#address-cells = <1>;
234		#size-cells = <0>;
235		interrupts = <60 0x2 0 0>;
236	};
237
238/include/ "pq3-esdhc-0.dtsi"
239	sdhc@2e000 {
240		compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
241	};
242
243/include/ "pq3-sec3.0-0.dtsi"
244/include/ "pq3-mpic.dtsi"
245/include/ "pq3-mpic-timer-B.dtsi"
246
247	global-utilities@e0000 {
248		compatible = "fsl,mpc8536-guts";
249		reg = <0xe0000 0x1000>;
250		fsl,has-rstcr;
251	};
252};
253