1/* 2 * MPC8536 Silicon/SoC Device Tree Source (post include) 3 * 4 * Copyright 2011 Freescale Semiconductor Inc. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions are met: 8 * * Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * * Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * * Neither the name of Freescale Semiconductor nor the 14 * names of its contributors may be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * 18 * ALTERNATIVELY, this software may be distributed under the terms of the 19 * GNU General Public License ("GPL") as published by the Free Software 20 * Foundation, either version 2 of that License or (at your option) any 21 * later version. 22 * 23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY 24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY 27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35&lbc { 36 #address-cells = <2>; 37 #size-cells = <1>; 38 compatible = "fsl,mpc8536-elbc", "fsl,elbc", "simple-bus"; 39 interrupts = <19 2 0 0>; 40}; 41 42/* controller at 0x8000 */ 43&pci0 { 44 compatible = "fsl,mpc8540-pci"; 45 device_type = "pci"; 46 interrupts = <24 0x2 0 0>; 47 bus-range = <0 0xff>; 48 #interrupt-cells = <1>; 49 #size-cells = <2>; 50 #address-cells = <3>; 51}; 52 53/* controller at 0x9000 */ 54&pci1 { 55 compatible = "fsl,mpc8548-pcie"; 56 device_type = "pci"; 57 #size-cells = <2>; 58 #address-cells = <3>; 59 bus-range = <0 255>; 60 clock-frequency = <33333333>; 61 interrupts = <25 2 0 0>; 62 63 pcie@0 { 64 reg = <0 0 0 0 0>; 65 #interrupt-cells = <1>; 66 #size-cells = <2>; 67 #address-cells = <3>; 68 device_type = "pci"; 69 interrupts = <25 2 0 0>; 70 interrupt-map-mask = <0xf800 0 0 7>; 71 72 interrupt-map = < 73 /* IDSEL 0x0 */ 74 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 75 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 76 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 77 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 78 >; 79 }; 80}; 81 82/* controller at 0xa000 */ 83&pci2 { 84 compatible = "fsl,mpc8548-pcie"; 85 device_type = "pci"; 86 #size-cells = <2>; 87 #address-cells = <3>; 88 bus-range = <0 255>; 89 clock-frequency = <33333333>; 90 interrupts = <26 2 0 0>; 91 92 pcie@0 { 93 reg = <0 0 0 0 0>; 94 #interrupt-cells = <1>; 95 #size-cells = <2>; 96 #address-cells = <3>; 97 device_type = "pci"; 98 interrupts = <26 2 0 0>; 99 interrupt-map-mask = <0xf800 0 0 7>; 100 interrupt-map = < 101 /* IDSEL 0x0 */ 102 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 103 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 104 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 105 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 106 >; 107 }; 108}; 109 110/* controller at 0xb000 */ 111&pci3 { 112 compatible = "fsl,mpc8548-pcie"; 113 device_type = "pci"; 114 #size-cells = <2>; 115 #address-cells = <3>; 116 bus-range = <0 255>; 117 clock-frequency = <33333333>; 118 interrupts = <27 2 0 0>; 119 120 pcie@0 { 121 reg = <0 0 0 0 0>; 122 #interrupt-cells = <1>; 123 #size-cells = <2>; 124 #address-cells = <3>; 125 device_type = "pci"; 126 interrupts = <27 2 0 0>; 127 interrupt-map-mask = <0xf800 0 0 7>; 128 interrupt-map = < 129 /* IDSEL 0x0 */ 130 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0 131 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0 132 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0 133 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0 134 >; 135 }; 136}; 137&soc { 138 #address-cells = <1>; 139 #size-cells = <1>; 140 device_type = "soc"; 141 compatible = "fsl,mpc8536-immr", "simple-bus"; 142 bus-frequency = <0>; // Filled out by uboot. 143 144 ecm-law@0 { 145 compatible = "fsl,ecm-law"; 146 reg = <0x0 0x1000>; 147 fsl,num-laws = <12>; 148 }; 149 150 ecm@1000 { 151 compatible = "fsl,mpc8536-ecm", "fsl,ecm"; 152 reg = <0x1000 0x1000>; 153 interrupts = <17 2 0 0>; 154 }; 155 156 memory-controller@2000 { 157 compatible = "fsl,mpc8536-memory-controller"; 158 reg = <0x2000 0x1000>; 159 interrupts = <18 2 0 0>; 160 }; 161 162/include/ "pq3-i2c-0.dtsi" 163/include/ "pq3-i2c-1.dtsi" 164/include/ "pq3-duart-0.dtsi" 165 166/include/ "pq3-espi-0.dtsi" 167 spi@7000 { 168 fsl,espi-num-chipselects = <4>; 169 }; 170 171/include/ "pq3-gpio-0.dtsi" 172 173 /* mark compat w/8572 to get some erratum treatment */ 174 gpio-controller@f000 { 175 compatible = "fsl,mpc8572-gpio"; 176 }; 177 178 sata@18000 { 179 compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; 180 reg = <0x18000 0x1000>; 181 cell-index = <1>; 182 interrupts = <74 0x2 0 0>; 183 }; 184 185 sata@19000 { 186 compatible = "fsl,mpc8536-sata", "fsl,pq-sata"; 187 reg = <0x19000 0x1000>; 188 cell-index = <2>; 189 interrupts = <41 0x2 0 0>; 190 }; 191 192 L2: l2-cache-controller@20000 { 193 compatible = "fsl,mpc8536-l2-cache-controller"; 194 reg = <0x20000 0x1000>; 195 cache-line-size = <32>; // 32 bytes 196 cache-size = <0x80000>; // L2, 512K 197 interrupts = <16 2 0 0>; 198 }; 199 200/include/ "pq3-dma-0.dtsi" 201/include/ "pq3-etsec1-0.dtsi" 202/include/ "pq3-etsec1-timer-0.dtsi" 203 204 usb@22000 { 205 compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; 206 reg = <0x22000 0x1000>; 207 #address-cells = <1>; 208 #size-cells = <0>; 209 interrupts = <28 0x2 0 0>; 210 }; 211 212 usb@23000 { 213 compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; 214 reg = <0x23000 0x1000>; 215 #address-cells = <1>; 216 #size-cells = <0>; 217 interrupts = <46 0x2 0 0>; 218 }; 219 220 ptp_clock@24e00 { 221 interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>; 222 }; 223 224/include/ "pq3-etsec1-2.dtsi" 225 226 ethernet@26000 { 227 cell-index = <1>; 228 }; 229 230 usb@2b000 { 231 compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr"; 232 reg = <0x2b000 0x1000>; 233 #address-cells = <1>; 234 #size-cells = <0>; 235 interrupts = <60 0x2 0 0>; 236 }; 237 238/include/ "pq3-esdhc-0.dtsi" 239 sdhc@2e000 { 240 compatible = "fsl,mpc8536-esdhc", "fsl,esdhc"; 241 }; 242 243/include/ "pq3-sec3.0-0.dtsi" 244/include/ "pq3-mpic.dtsi" 245/include/ "pq3-mpic-timer-B.dtsi" 246 247 global-utilities@e0000 { 248 compatible = "fsl,mpc8536-guts"; 249 reg = <0xe0000 0x1000>; 250 fsl,has-rstcr; 251 }; 252}; 253