1Hardware Spinlock Framework 2 31. Introduction 4 5Hardware spinlock modules provide hardware assistance for synchronization 6and mutual exclusion between heterogeneous processors and those not operating 7under a single, shared operating system. 8 9For example, OMAP4 has dual Cortex-A9, dual Cortex-M3 and a C64x+ DSP, 10each of which is running a different Operating System (the master, A9, 11is usually running Linux and the slave processors, the M3 and the DSP, 12are running some flavor of RTOS). 13 14A generic hwspinlock framework allows platform-independent drivers to use 15the hwspinlock device in order to access data structures that are shared 16between remote processors, that otherwise have no alternative mechanism 17to accomplish synchronization and mutual exclusion operations. 18 19This is necessary, for example, for Inter-processor communications: 20on OMAP4, cpu-intensive multimedia tasks are offloaded by the host to the 21remote M3 and/or C64x+ slave processors (by an IPC subsystem called Syslink). 22 23To achieve fast message-based communications, a minimal kernel support 24is needed to deliver messages arriving from a remote processor to the 25appropriate user process. 26 27This communication is based on simple data structures that is shared between 28the remote processors, and access to it is synchronized using the hwspinlock 29module (remote processor directly places new messages in this shared data 30structure). 31 32A common hwspinlock interface makes it possible to have generic, platform- 33independent, drivers. 34 352. User API 36 37 struct hwspinlock *hwspin_lock_request(void); 38 - dynamically assign an hwspinlock and return its address, or NULL 39 in case an unused hwspinlock isn't available. Users of this 40 API will usually want to communicate the lock's id to the remote core 41 before it can be used to achieve synchronization. 42 Should be called from a process context (might sleep). 43 44 struct hwspinlock *hwspin_lock_request_specific(unsigned int id); 45 - assign a specific hwspinlock id and return its address, or NULL 46 if that hwspinlock is already in use. Usually board code will 47 be calling this function in order to reserve specific hwspinlock 48 ids for predefined purposes. 49 Should be called from a process context (might sleep). 50 51 int of_hwspin_lock_get_id(struct device_node *np, int index); 52 - retrieve the global lock id for an OF phandle-based specific lock. 53 This function provides a means for DT users of a hwspinlock module 54 to get the global lock id of a specific hwspinlock, so that it can 55 be requested using the normal hwspin_lock_request_specific() API. 56 The function returns a lock id number on success, -EPROBE_DEFER if 57 the hwspinlock device is not yet registered with the core, or other 58 error values. 59 Should be called from a process context (might sleep). 60 61 int hwspin_lock_free(struct hwspinlock *hwlock); 62 - free a previously-assigned hwspinlock; returns 0 on success, or an 63 appropriate error code on failure (e.g. -EINVAL if the hwspinlock 64 is already free). 65 Should be called from a process context (might sleep). 66 67 int hwspin_lock_timeout(struct hwspinlock *hwlock, unsigned int timeout); 68 - lock a previously-assigned hwspinlock with a timeout limit (specified in 69 msecs). If the hwspinlock is already taken, the function will busy loop 70 waiting for it to be released, but give up when the timeout elapses. 71 Upon a successful return from this function, preemption is disabled so 72 the caller must not sleep, and is advised to release the hwspinlock as 73 soon as possible, in order to minimize remote cores polling on the 74 hardware interconnect. 75 Returns 0 when successful and an appropriate error code otherwise (most 76 notably -ETIMEDOUT if the hwspinlock is still busy after timeout msecs). 77 The function will never sleep. 78 79 int hwspin_lock_timeout_irq(struct hwspinlock *hwlock, unsigned int timeout); 80 - lock a previously-assigned hwspinlock with a timeout limit (specified in 81 msecs). If the hwspinlock is already taken, the function will busy loop 82 waiting for it to be released, but give up when the timeout elapses. 83 Upon a successful return from this function, preemption and the local 84 interrupts are disabled, so the caller must not sleep, and is advised to 85 release the hwspinlock as soon as possible. 86 Returns 0 when successful and an appropriate error code otherwise (most 87 notably -ETIMEDOUT if the hwspinlock is still busy after timeout msecs). 88 The function will never sleep. 89 90 int hwspin_lock_timeout_irqsave(struct hwspinlock *hwlock, unsigned int to, 91 unsigned long *flags); 92 - lock a previously-assigned hwspinlock with a timeout limit (specified in 93 msecs). If the hwspinlock is already taken, the function will busy loop 94 waiting for it to be released, but give up when the timeout elapses. 95 Upon a successful return from this function, preemption is disabled, 96 local interrupts are disabled and their previous state is saved at the 97 given flags placeholder. The caller must not sleep, and is advised to 98 release the hwspinlock as soon as possible. 99 Returns 0 when successful and an appropriate error code otherwise (most 100 notably -ETIMEDOUT if the hwspinlock is still busy after timeout msecs). 101 The function will never sleep. 102 103 int hwspin_trylock(struct hwspinlock *hwlock); 104 - attempt to lock a previously-assigned hwspinlock, but immediately fail if 105 it is already taken. 106 Upon a successful return from this function, preemption is disabled so 107 caller must not sleep, and is advised to release the hwspinlock as soon as 108 possible, in order to minimize remote cores polling on the hardware 109 interconnect. 110 Returns 0 on success and an appropriate error code otherwise (most 111 notably -EBUSY if the hwspinlock was already taken). 112 The function will never sleep. 113 114 int hwspin_trylock_irq(struct hwspinlock *hwlock); 115 - attempt to lock a previously-assigned hwspinlock, but immediately fail if 116 it is already taken. 117 Upon a successful return from this function, preemption and the local 118 interrupts are disabled so caller must not sleep, and is advised to 119 release the hwspinlock as soon as possible. 120 Returns 0 on success and an appropriate error code otherwise (most 121 notably -EBUSY if the hwspinlock was already taken). 122 The function will never sleep. 123 124 int hwspin_trylock_irqsave(struct hwspinlock *hwlock, unsigned long *flags); 125 - attempt to lock a previously-assigned hwspinlock, but immediately fail if 126 it is already taken. 127 Upon a successful return from this function, preemption is disabled, 128 the local interrupts are disabled and their previous state is saved 129 at the given flags placeholder. The caller must not sleep, and is advised 130 to release the hwspinlock as soon as possible. 131 Returns 0 on success and an appropriate error code otherwise (most 132 notably -EBUSY if the hwspinlock was already taken). 133 The function will never sleep. 134 135 void hwspin_unlock(struct hwspinlock *hwlock); 136 - unlock a previously-locked hwspinlock. Always succeed, and can be called 137 from any context (the function never sleeps). Note: code should _never_ 138 unlock an hwspinlock which is already unlocked (there is no protection 139 against this). 140 141 void hwspin_unlock_irq(struct hwspinlock *hwlock); 142 - unlock a previously-locked hwspinlock and enable local interrupts. 143 The caller should _never_ unlock an hwspinlock which is already unlocked. 144 Doing so is considered a bug (there is no protection against this). 145 Upon a successful return from this function, preemption and local 146 interrupts are enabled. This function will never sleep. 147 148 void 149 hwspin_unlock_irqrestore(struct hwspinlock *hwlock, unsigned long *flags); 150 - unlock a previously-locked hwspinlock. 151 The caller should _never_ unlock an hwspinlock which is already unlocked. 152 Doing so is considered a bug (there is no protection against this). 153 Upon a successful return from this function, preemption is reenabled, 154 and the state of the local interrupts is restored to the state saved at 155 the given flags. This function will never sleep. 156 157 int hwspin_lock_get_id(struct hwspinlock *hwlock); 158 - retrieve id number of a given hwspinlock. This is needed when an 159 hwspinlock is dynamically assigned: before it can be used to achieve 160 mutual exclusion with a remote cpu, the id number should be communicated 161 to the remote task with which we want to synchronize. 162 Returns the hwspinlock id number, or -EINVAL if hwlock is null. 163 1643. Typical usage 165 166#include <linux/hwspinlock.h> 167#include <linux/err.h> 168 169int hwspinlock_example1(void) 170{ 171 struct hwspinlock *hwlock; 172 int ret; 173 174 /* dynamically assign a hwspinlock */ 175 hwlock = hwspin_lock_request(); 176 if (!hwlock) 177 ... 178 179 id = hwspin_lock_get_id(hwlock); 180 /* probably need to communicate id to a remote processor now */ 181 182 /* take the lock, spin for 1 sec if it's already taken */ 183 ret = hwspin_lock_timeout(hwlock, 1000); 184 if (ret) 185 ... 186 187 /* 188 * we took the lock, do our thing now, but do NOT sleep 189 */ 190 191 /* release the lock */ 192 hwspin_unlock(hwlock); 193 194 /* free the lock */ 195 ret = hwspin_lock_free(hwlock); 196 if (ret) 197 ... 198 199 return ret; 200} 201 202int hwspinlock_example2(void) 203{ 204 struct hwspinlock *hwlock; 205 int ret; 206 207 /* 208 * assign a specific hwspinlock id - this should be called early 209 * by board init code. 210 */ 211 hwlock = hwspin_lock_request_specific(PREDEFINED_LOCK_ID); 212 if (!hwlock) 213 ... 214 215 /* try to take it, but don't spin on it */ 216 ret = hwspin_trylock(hwlock); 217 if (!ret) { 218 pr_info("lock is already taken\n"); 219 return -EBUSY; 220 } 221 222 /* 223 * we took the lock, do our thing now, but do NOT sleep 224 */ 225 226 /* release the lock */ 227 hwspin_unlock(hwlock); 228 229 /* free the lock */ 230 ret = hwspin_lock_free(hwlock); 231 if (ret) 232 ... 233 234 return ret; 235} 236 237 2384. API for implementors 239 240 int hwspin_lock_register(struct hwspinlock_device *bank, struct device *dev, 241 const struct hwspinlock_ops *ops, int base_id, int num_locks); 242 - to be called from the underlying platform-specific implementation, in 243 order to register a new hwspinlock device (which is usually a bank of 244 numerous locks). Should be called from a process context (this function 245 might sleep). 246 Returns 0 on success, or appropriate error code on failure. 247 248 int hwspin_lock_unregister(struct hwspinlock_device *bank); 249 - to be called from the underlying vendor-specific implementation, in order 250 to unregister an hwspinlock device (which is usually a bank of numerous 251 locks). 252 Should be called from a process context (this function might sleep). 253 Returns the address of hwspinlock on success, or NULL on error (e.g. 254 if the hwspinlock is still in use). 255 2565. Important structs 257 258struct hwspinlock_device is a device which usually contains a bank 259of hardware locks. It is registered by the underlying hwspinlock 260implementation using the hwspin_lock_register() API. 261 262/** 263 * struct hwspinlock_device - a device which usually spans numerous hwspinlocks 264 * @dev: underlying device, will be used to invoke runtime PM api 265 * @ops: platform-specific hwspinlock handlers 266 * @base_id: id index of the first lock in this device 267 * @num_locks: number of locks in this device 268 * @lock: dynamically allocated array of 'struct hwspinlock' 269 */ 270struct hwspinlock_device { 271 struct device *dev; 272 const struct hwspinlock_ops *ops; 273 int base_id; 274 int num_locks; 275 struct hwspinlock lock[0]; 276}; 277 278struct hwspinlock_device contains an array of hwspinlock structs, each 279of which represents a single hardware lock: 280 281/** 282 * struct hwspinlock - this struct represents a single hwspinlock instance 283 * @bank: the hwspinlock_device structure which owns this lock 284 * @lock: initialized and used by hwspinlock core 285 * @priv: private data, owned by the underlying platform-specific hwspinlock drv 286 */ 287struct hwspinlock { 288 struct hwspinlock_device *bank; 289 spinlock_t lock; 290 void *priv; 291}; 292 293When registering a bank of locks, the hwspinlock driver only needs to 294set the priv members of the locks. The rest of the members are set and 295initialized by the hwspinlock core itself. 296 2976. Implementation callbacks 298 299There are three possible callbacks defined in 'struct hwspinlock_ops': 300 301struct hwspinlock_ops { 302 int (*trylock)(struct hwspinlock *lock); 303 void (*unlock)(struct hwspinlock *lock); 304 void (*relax)(struct hwspinlock *lock); 305}; 306 307The first two callbacks are mandatory: 308 309The ->trylock() callback should make a single attempt to take the lock, and 310return 0 on failure and 1 on success. This callback may _not_ sleep. 311 312The ->unlock() callback releases the lock. It always succeed, and it, too, 313may _not_ sleep. 314 315The ->relax() callback is optional. It is called by hwspinlock core while 316spinning on a lock, and can be used by the underlying implementation to force 317a delay between two successive invocations of ->trylock(). It may _not_ sleep. 318