1 /*
2 * linux/arch/alpha/kernel/sys_miata.c
3 *
4 * Copyright (C) 1995 David A Rusling
5 * Copyright (C) 1996 Jay A Estabrook
6 * Copyright (C) 1998, 1999, 2000 Richard Henderson
7 *
8 * Code supporting the MIATA (EV56+PYXIS).
9 */
10
11 #include <linux/kernel.h>
12 #include <linux/types.h>
13 #include <linux/mm.h>
14 #include <linux/sched.h>
15 #include <linux/pci.h>
16 #include <linux/init.h>
17 #include <linux/reboot.h>
18
19 #include <asm/ptrace.h>
20 #include <asm/dma.h>
21 #include <asm/irq.h>
22 #include <asm/mmu_context.h>
23 #include <asm/io.h>
24 #include <asm/pgtable.h>
25 #include <asm/core_cia.h>
26 #include <asm/tlbflush.h>
27
28 #include "proto.h"
29 #include "irq_impl.h"
30 #include "pci_impl.h"
31 #include "machvec_impl.h"
32
33
34 static void
miata_srm_device_interrupt(unsigned long vector)35 miata_srm_device_interrupt(unsigned long vector)
36 {
37 int irq;
38
39 irq = (vector - 0x800) >> 4;
40
41 /*
42 * I really hate to do this, but the MIATA SRM console ignores the
43 * low 8 bits in the interrupt summary register, and reports the
44 * vector 0x80 *lower* than I expected from the bit numbering in
45 * the documentation.
46 * This was done because the low 8 summary bits really aren't used
47 * for reporting any interrupts (the PCI-ISA bridge, bit 7, isn't
48 * used for this purpose, as PIC interrupts are delivered as the
49 * vectors 0x800-0x8f0).
50 * But I really don't want to change the fixup code for allocation
51 * of IRQs, nor the alpha_irq_mask maintenance stuff, both of which
52 * look nice and clean now.
53 * So, here's this grotty hack... :-(
54 */
55 if (irq >= 16)
56 irq = irq + 8;
57
58 handle_irq(irq);
59 }
60
61 static void __init
miata_init_irq(void)62 miata_init_irq(void)
63 {
64 if (alpha_using_srm)
65 alpha_mv.device_interrupt = miata_srm_device_interrupt;
66
67 #if 0
68 /* These break on MiataGL so we'll try not to do it at all. */
69 *(vulp)PYXIS_INT_HILO = 0x000000B2UL; mb(); /* ISA/NMI HI */
70 *(vulp)PYXIS_RT_COUNT = 0UL; mb(); /* clear count */
71 #endif
72
73 init_i8259a_irqs();
74
75 /* Not interested in the bogus interrupts (3,10), Fan Fault (0),
76 NMI (1), or EIDE (9).
77
78 We also disable the risers (4,5), since we don't know how to
79 route the interrupts behind the bridge. */
80 init_pyxis_irqs(0x63b0000);
81
82 common_init_isa_dma();
83 setup_irq(16+2, &halt_switch_irqaction); /* SRM only? */
84 setup_irq(16+6, &timer_cascade_irqaction);
85 }
86
87
88 /*
89 * PCI Fixup configuration.
90 *
91 * Summary @ PYXIS_INT_REQ:
92 * Bit Meaning
93 * 0 Fan Fault
94 * 1 NMI
95 * 2 Halt/Reset switch
96 * 3 none
97 * 4 CID0 (Riser ID)
98 * 5 CID1 (Riser ID)
99 * 6 Interval timer
100 * 7 PCI-ISA Bridge
101 * 8 Ethernet
102 * 9 EIDE (deprecated, ISA 14/15 used)
103 *10 none
104 *11 USB
105 *12 Interrupt Line A from slot 4
106 *13 Interrupt Line B from slot 4
107 *14 Interrupt Line C from slot 4
108 *15 Interrupt Line D from slot 4
109 *16 Interrupt Line A from slot 5
110 *17 Interrupt line B from slot 5
111 *18 Interrupt Line C from slot 5
112 *19 Interrupt Line D from slot 5
113 *20 Interrupt Line A from slot 1
114 *21 Interrupt Line B from slot 1
115 *22 Interrupt Line C from slot 1
116 *23 Interrupt Line D from slot 1
117 *24 Interrupt Line A from slot 2
118 *25 Interrupt Line B from slot 2
119 *26 Interrupt Line C from slot 2
120 *27 Interrupt Line D from slot 2
121 *27 Interrupt Line A from slot 3
122 *29 Interrupt Line B from slot 3
123 *30 Interrupt Line C from slot 3
124 *31 Interrupt Line D from slot 3
125 *
126 * The device to slot mapping looks like:
127 *
128 * Slot Device
129 * 3 DC21142 Ethernet
130 * 4 EIDE CMD646
131 * 5 none
132 * 6 USB
133 * 7 PCI-ISA bridge
134 * 8 PCI-PCI Bridge (SBU Riser)
135 * 9 none
136 * 10 none
137 * 11 PCI on board slot 4 (SBU Riser)
138 * 12 PCI on board slot 5 (SBU Riser)
139 *
140 * These are behind the bridge, so I'm not sure what to do...
141 *
142 * 13 PCI on board slot 1 (SBU Riser)
143 * 14 PCI on board slot 2 (SBU Riser)
144 * 15 PCI on board slot 3 (SBU Riser)
145 *
146 *
147 * This two layered interrupt approach means that we allocate IRQ 16 and
148 * above for PCI interrupts. The IRQ relates to which bit the interrupt
149 * comes in on. This makes interrupt processing much easier.
150 */
151
152 static int __init
miata_map_irq(const struct pci_dev * dev,u8 slot,u8 pin)153 miata_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
154 {
155 static char irq_tab[18][5] __initdata = {
156 /*INT INTA INTB INTC INTD */
157 {16+ 8, 16+ 8, 16+ 8, 16+ 8, 16+ 8}, /* IdSel 14, DC21142 */
158 { -1, -1, -1, -1, -1}, /* IdSel 15, EIDE */
159 { -1, -1, -1, -1, -1}, /* IdSel 16, none */
160 { -1, -1, -1, -1, -1}, /* IdSel 17, none */
161 { -1, -1, -1, -1, -1}, /* IdSel 18, PCI-ISA */
162 { -1, -1, -1, -1, -1}, /* IdSel 19, PCI-PCI */
163 { -1, -1, -1, -1, -1}, /* IdSel 20, none */
164 { -1, -1, -1, -1, -1}, /* IdSel 21, none */
165 {16+12, 16+12, 16+13, 16+14, 16+15}, /* IdSel 22, slot 4 */
166 {16+16, 16+16, 16+17, 16+18, 16+19}, /* IdSel 23, slot 5 */
167 /* the next 7 are actually on PCI bus 1, across the bridge */
168 {16+11, 16+11, 16+11, 16+11, 16+11}, /* IdSel 24, QLISP/GL*/
169 { -1, -1, -1, -1, -1}, /* IdSel 25, none */
170 { -1, -1, -1, -1, -1}, /* IdSel 26, none */
171 { -1, -1, -1, -1, -1}, /* IdSel 27, none */
172 {16+20, 16+20, 16+21, 16+22, 16+23}, /* IdSel 28, slot 1 */
173 {16+24, 16+24, 16+25, 16+26, 16+27}, /* IdSel 29, slot 2 */
174 {16+28, 16+28, 16+29, 16+30, 16+31}, /* IdSel 30, slot 3 */
175 /* This bridge is on the main bus of the later orig MIATA */
176 { -1, -1, -1, -1, -1}, /* IdSel 31, PCI-PCI */
177 };
178 const long min_idsel = 3, max_idsel = 20, irqs_per_slot = 5;
179
180 /* the USB function of the 82c693 has it's interrupt connected to
181 the 2nd 8259 controller. So we have to check for it first. */
182
183 if((slot == 7) && (PCI_FUNC(dev->devfn) == 3)) {
184 u8 irq=0;
185 struct pci_dev *pdev = pci_get_slot(dev->bus, dev->devfn & ~7);
186 if(pdev == NULL || pci_read_config_byte(pdev, 0x40,&irq) != PCIBIOS_SUCCESSFUL) {
187 pci_dev_put(pdev);
188 return -1;
189 }
190 else {
191 pci_dev_put(pdev);
192 return irq;
193 }
194 }
195
196 return COMMON_TABLE_LOOKUP;
197 }
198
199 static u8 __init
miata_swizzle(struct pci_dev * dev,u8 * pinp)200 miata_swizzle(struct pci_dev *dev, u8 *pinp)
201 {
202 int slot, pin = *pinp;
203
204 if (dev->bus->number == 0) {
205 slot = PCI_SLOT(dev->devfn);
206 }
207 /* Check for the built-in bridge. */
208 else if ((PCI_SLOT(dev->bus->self->devfn) == 8) ||
209 (PCI_SLOT(dev->bus->self->devfn) == 20)) {
210 slot = PCI_SLOT(dev->devfn) + 9;
211 }
212 else
213 {
214 /* Must be a card-based bridge. */
215 do {
216 if ((PCI_SLOT(dev->bus->self->devfn) == 8) ||
217 (PCI_SLOT(dev->bus->self->devfn) == 20)) {
218 slot = PCI_SLOT(dev->devfn) + 9;
219 break;
220 }
221 pin = pci_swizzle_interrupt_pin(dev, pin);
222
223 /* Move up the chain of bridges. */
224 dev = dev->bus->self;
225 /* Slot of the next bridge. */
226 slot = PCI_SLOT(dev->devfn);
227 } while (dev->bus->self);
228 }
229 *pinp = pin;
230 return slot;
231 }
232
233 static void __init
miata_init_pci(void)234 miata_init_pci(void)
235 {
236 cia_init_pci();
237 SMC669_Init(0); /* it might be a GL (fails harmlessly if not) */
238 es1888_init();
239 }
240
241 static void
miata_kill_arch(int mode)242 miata_kill_arch(int mode)
243 {
244 cia_kill_arch(mode);
245
246 #ifndef ALPHA_RESTORE_SRM_SETUP
247 switch(mode) {
248 case LINUX_REBOOT_CMD_RESTART:
249 /* Who said DEC engineers have no sense of humor? ;-) */
250 if (alpha_using_srm) {
251 *(vuip) PYXIS_RESET = 0x0000dead;
252 mb();
253 }
254 break;
255 case LINUX_REBOOT_CMD_HALT:
256 break;
257 case LINUX_REBOOT_CMD_POWER_OFF:
258 break;
259 }
260
261 halt();
262 #endif
263 }
264
265
266 /*
267 * The System Vector
268 */
269
270 struct alpha_machine_vector miata_mv __initmv = {
271 .vector_name = "Miata",
272 DO_EV5_MMU,
273 DO_DEFAULT_RTC,
274 DO_PYXIS_IO,
275 .machine_check = cia_machine_check,
276 .max_isa_dma_address = ALPHA_MAX_ISA_DMA_ADDRESS,
277 .min_io_address = DEFAULT_IO_BASE,
278 .min_mem_address = DEFAULT_MEM_BASE,
279 .pci_dac_offset = PYXIS_DAC_OFFSET,
280
281 .nr_irqs = 48,
282 .device_interrupt = pyxis_device_interrupt,
283
284 .init_arch = pyxis_init_arch,
285 .init_irq = miata_init_irq,
286 .init_rtc = common_init_rtc,
287 .init_pci = miata_init_pci,
288 .kill_arch = miata_kill_arch,
289 .pci_map_irq = miata_map_irq,
290 .pci_swizzle = miata_swizzle,
291 };
292 ALIAS_MV(miata)
293