1/* 2 * Copyright 2013 Greg Ungerer <gerg@uclinux.org> 3 * Copyright 2011 Freescale Semiconductor, Inc. 4 * Copyright 2011 Linaro Ltd. 5 * 6 * The code contained herein is licensed under the GNU General Public 7 * License. You may obtain a copy of the GNU General Public License 8 * Version 2 or later at the following locations: 9 * 10 * http://www.opensource.org/licenses/gpl-license.html 11 * http://www.gnu.org/copyleft/gpl.html 12 */ 13 14/dts-v1/; 15#include "imx50.dtsi" 16 17/ { 18 model = "Freescale i.MX50 Evaluation Kit"; 19 compatible = "fsl,imx50-evk", "fsl,imx50"; 20 21 memory { 22 reg = <0x70000000 0x80000000>; 23 }; 24}; 25 26&cspi { 27 pinctrl-names = "default"; 28 pinctrl-0 = <&pinctrl_cspi>; 29 fsl,spi-num-chipselects = <2>; 30 cs-gpios = <&gpio4 11 0>, <&gpio4 13 0>; 31 status = "okay"; 32 33 flash: m25p32@1 { 34 #address-cells = <1>; 35 #size-cells = <1>; 36 compatible = "m25p32", "jedec,spi-nor"; 37 spi-max-frequency = <25000000>; 38 reg = <1>; 39 40 partition@0 { 41 label = "bootloader"; 42 reg = <0x0 0x100000>; 43 read-only; 44 }; 45 46 partition@100000 { 47 label = "kernel"; 48 reg = <0x100000 0x300000>; 49 }; 50 }; 51}; 52 53&fec { 54 pinctrl-names = "default"; 55 pinctrl-0 = <&pinctrl_fec>; 56 phy-mode = "rmii"; 57 phy-reset-gpios = <&gpio4 12 0>; 58 status = "okay"; 59}; 60 61&iomuxc { 62 imx50-evk { 63 pinctrl_cspi: cspigrp { 64 fsl,pins = < 65 MX50_PAD_CSPI_SCLK__CSPI_SCLK 0x00 66 MX50_PAD_CSPI_MISO__CSPI_MISO 0x00 67 MX50_PAD_CSPI_MOSI__CSPI_MOSI 0x00 68 MX50_PAD_CSPI_SS0__GPIO4_11 0xc4 69 MX50_PAD_ECSPI1_MOSI__GPIO4_13 0x84 70 >; 71 }; 72 73 pinctrl_fec: fecgrp { 74 fsl,pins = < 75 MX50_PAD_SSI_RXFS__FEC_MDC 0x80 76 MX50_PAD_SSI_RXC__FEC_MDIO 0x80 77 MX50_PAD_DISP_D0__FEC_TX_CLK 0x80 78 MX50_PAD_DISP_D1__FEC_RX_ERR 0x80 79 MX50_PAD_DISP_D2__FEC_RX_DV 0x80 80 MX50_PAD_DISP_D3__FEC_RDATA_1 0x80 81 MX50_PAD_DISP_D4__FEC_RDATA_0 0x80 82 MX50_PAD_DISP_D5__FEC_TX_EN 0x80 83 MX50_PAD_DISP_D6__FEC_TDATA_1 0x80 84 MX50_PAD_DISP_D7__FEC_TDATA_0 0x80 85 >; 86 }; 87 88 pinctrl_uart1: uart1grp { 89 fsl,pins = < 90 MX50_PAD_UART1_TXD__UART1_TXD_MUX 0x1e4 91 MX50_PAD_UART1_RXD__UART1_RXD_MUX 0x1e4 92 MX50_PAD_UART1_RTS__UART1_RTS 0x1e4 93 MX50_PAD_UART1_CTS__UART1_CTS 0x1e4 94 >; 95 }; 96 }; 97}; 98 99&uart1 { 100 pinctrl-names = "default"; 101 pinctrl-0 = <&pinctrl_uart1>; 102 status = "okay"; 103}; 104 105&usbh1 { 106 status = "okay"; 107}; 108 109&usbh2 { 110 status = "okay"; 111}; 112 113&usbh3 { 114 status = "okay"; 115}; 116 117&usbotg { 118 status = "okay"; 119}; 120