1/* 2 * Copyright (C) 2013,2014 Russell King 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License 11 * version 2 as published by the Free Software Foundation. 12 * 13 * This file is distributed in the hope that it will be useful 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * Or, alternatively 19 * 20 * b) Permission is hereby granted, free of charge, to any person 21 * obtaining a copy of this software and associated documentation 22 * files (the "Software"), to deal in the Software without 23 * restriction, including without limitation the rights to use 24 * copy, modify, merge, publish, distribute, sublicense, and/or 25 * sell copies of the Software, and to permit persons to whom the 26 * Software is furnished to do so, subject to the following 27 * conditions: 28 * 29 * The above copyright notice and this permission notice shall be 30 * included in all copies or substantial portions of the Software. 31 * 32 * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND 33 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 34 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 35 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 36 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY 37 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 38 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 39 * OTHER DEALINGS IN THE SOFTWARE. 40 */ 41#include "imx6qdl-microsom.dtsi" 42#include "imx6qdl-microsom-ar8035.dtsi" 43 44/ { 45 chosen { 46 stdout-path = &uart1; 47 }; 48 49 ir_recv: ir-receiver { 50 compatible = "gpio-ir-receiver"; 51 gpios = <&gpio3 5 1>; 52 pinctrl-names = "default"; 53 pinctrl-0 = <&pinctrl_hummingboard_gpio3_5>; 54 }; 55 56 regulators { 57 compatible = "simple-bus"; 58 59 reg_3p3v: 3p3v { 60 compatible = "regulator-fixed"; 61 regulator-name = "3P3V"; 62 regulator-min-microvolt = <3300000>; 63 regulator-max-microvolt = <3300000>; 64 regulator-always-on; 65 }; 66 67 reg_usbh1_vbus: usb-h1-vbus { 68 compatible = "regulator-fixed"; 69 enable-active-high; 70 gpio = <&gpio1 0 0>; 71 pinctrl-names = "default"; 72 pinctrl-0 = <&pinctrl_hummingboard_usbh1_vbus>; 73 regulator-name = "usb_h1_vbus"; 74 regulator-min-microvolt = <5000000>; 75 regulator-max-microvolt = <5000000>; 76 }; 77 78 reg_usbotg_vbus: usb-otg-vbus { 79 compatible = "regulator-fixed"; 80 enable-active-high; 81 gpio = <&gpio3 22 0>; 82 pinctrl-names = "default"; 83 pinctrl-0 = <&pinctrl_hummingboard_usbotg_vbus>; 84 regulator-name = "usb_otg_vbus"; 85 regulator-min-microvolt = <5000000>; 86 regulator-max-microvolt = <5000000>; 87 }; 88 }; 89 90 sound-sgtl5000 { 91 audio-codec = <&sgtl5000>; 92 audio-routing = 93 "MIC_IN", "Mic Jack", 94 "Mic Jack", "Mic Bias", 95 "Headphone Jack", "HP_OUT"; 96 compatible = "fsl,imx-audio-sgtl5000"; 97 model = "On-board Codec"; 98 mux-ext-port = <5>; 99 mux-int-port = <1>; 100 ssi-controller = <&ssi1>; 101 }; 102 103 sound-spdif { 104 compatible = "fsl,imx-audio-spdif"; 105 model = "On-board SPDIF"; 106 /* IMX6 doesn't implement this yet */ 107 spdif-controller = <&spdif>; 108 spdif-out; 109 }; 110}; 111 112&audmux { 113 status = "okay"; 114}; 115 116&can1 { 117 pinctrl-names = "default"; 118 pinctrl-0 = <&pinctrl_hummingboard_flexcan1>; 119 status = "okay"; 120}; 121 122&hdmi { 123 pinctrl-names = "default"; 124 pinctrl-0 = <&pinctrl_hummingboard_hdmi>; 125 ddc-i2c-bus = <&i2c2>; 126 status = "okay"; 127}; 128 129&i2c1 { 130 pinctrl-names = "default"; 131 pinctrl-0 = <&pinctrl_hummingboard_i2c1>; 132 status = "okay"; 133 134 /* Pro baseboard model */ 135 rtc: pcf8523@68 { 136 compatible = "nxp,pcf8523"; 137 reg = <0x68>; 138 }; 139 140 /* Pro baseboard model */ 141 sgtl5000: sgtl5000@0a { 142 clocks = <&clks IMX6QDL_CLK_CKO>; 143 compatible = "fsl,sgtl5000"; 144 pinctrl-names = "default"; 145 pinctrl-0 = <&pinctrl_hummingboard_sgtl5000>; 146 reg = <0x0a>; 147 VDDA-supply = <®_3p3v>; 148 VDDIO-supply = <®_3p3v>; 149 }; 150}; 151 152&i2c2 { 153 clock-frequency = <100000>; 154 pinctrl-names = "default"; 155 pinctrl-0 = <&pinctrl_hummingboard_i2c2>; 156 status = "okay"; 157}; 158 159&iomuxc { 160 hummingboard { 161 pinctrl_hummingboard_flexcan1: hummingboard-flexcan1 { 162 fsl,pins = < 163 MX6QDL_PAD_SD3_CLK__FLEXCAN1_RX 0x80000000 164 MX6QDL_PAD_SD3_CMD__FLEXCAN1_TX 0x80000000 165 >; 166 }; 167 168 pinctrl_hummingboard_gpio3_5: hummingboard-gpio3_5 { 169 fsl,pins = < 170 MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1 171 >; 172 }; 173 174 pinctrl_hummingboard_hdmi: hummingboard-hdmi { 175 fsl,pins = < 176 MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 177 >; 178 }; 179 180 pinctrl_hummingboard_i2c1: hummingboard-i2c1 { 181 fsl,pins = < 182 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 183 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 184 >; 185 }; 186 187 pinctrl_hummingboard_i2c2: hummingboard-i2c2 { 188 fsl,pins = < 189 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 190 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 191 >; 192 }; 193 194 pinctrl_hummingboard_pcie_reset: hummingboard-pcie-reset { 195 fsl,pins = < 196 MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1 197 >; 198 }; 199 200 pinctrl_hummingboard_pwm1: pwm1grp { 201 fsl,pins = <MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b1>; 202 }; 203 204 pinctrl_hummingboard_sgtl5000: hummingboard-sgtl5000 { 205 fsl,pins = < 206 MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 207 MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 208 MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 209 MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 210 MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0 211 >; 212 }; 213 214 pinctrl_hummingboard_spdif: hummingboard-spdif { 215 fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>; 216 }; 217 218 pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus { 219 fsl,pins = <MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0>; 220 }; 221 222 pinctrl_hummingboard_usbotg_id: hummingboard-usbotg-id { 223 /* 224 * Similar to pinctrl_usbotg_2, but we want it 225 * pulled down for a fixed host connection. 226 */ 227 fsl,pins = <MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059>; 228 }; 229 230 pinctrl_hummingboard_usbotg_vbus: hummingboard-usbotg-vbus { 231 fsl,pins = <MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0>; 232 }; 233 234 pinctrl_hummingboard_usdhc2_aux: hummingboard-usdhc2-aux { 235 fsl,pins = < 236 MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1f071 237 >; 238 }; 239 240 pinctrl_hummingboard_usdhc2: hummingboard-usdhc2 { 241 fsl,pins = < 242 MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 243 MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 244 MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 245 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 246 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 247 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x13059 248 >; 249 }; 250 }; 251}; 252 253&pcie { 254 pinctrl-names = "default"; 255 pinctrl-0 = <&pinctrl_hummingboard_pcie_reset>; 256 reset-gpio = <&gpio3 4 0>; 257 status = "okay"; 258}; 259 260&pwm1 { 261 pinctrl-names = "default"; 262 pinctrl-0 = <&pinctrl_hummingboard_pwm1>; 263 status = "okay"; 264}; 265 266&pwm2 { 267 pinctrl-names = "default"; 268 status = "okay"; 269}; 270 271&spdif { 272 pinctrl-names = "default"; 273 pinctrl-0 = <&pinctrl_hummingboard_spdif>; 274 status = "okay"; 275}; 276 277&ssi1 { 278 status = "okay"; 279}; 280 281&usbh1 { 282 disable-over-current; 283 vbus-supply = <®_usbh1_vbus>; 284 status = "okay"; 285}; 286 287&usbotg { 288 disable-over-current; 289 pinctrl-names = "default"; 290 pinctrl-0 = <&pinctrl_hummingboard_usbotg_id>; 291 vbus-supply = <®_usbotg_vbus>; 292 status = "okay"; 293}; 294 295&usdhc2 { 296 pinctrl-names = "default"; 297 pinctrl-0 = < 298 &pinctrl_hummingboard_usdhc2_aux 299 &pinctrl_hummingboard_usdhc2 300 >; 301 vmmc-supply = <®_3p3v>; 302 cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; 303 status = "okay"; 304}; 305