1/* 2 * Copyright 2014 Texas Instruments, Inc. 3 * 4 * Keystone 2 Lamarr EVM device tree 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2 as 8 * published by the Free Software Foundation. 9 */ 10/dts-v1/; 11 12#include "keystone.dtsi" 13#include "k2l.dtsi" 14 15/ { 16 compatible = "ti,k2l-evm", "ti,k2l", "ti,keystone"; 17 model = "Texas Instruments Keystone 2 Lamarr EVM"; 18 19 soc { 20 clocks { 21 refclksys: refclksys { 22 #clock-cells = <0>; 23 compatible = "fixed-clock"; 24 clock-frequency = <122880000>; 25 clock-output-names = "refclk-sys"; 26 }; 27 }; 28 }; 29}; 30 31&usb_phy { 32 status = "okay"; 33}; 34 35&usb { 36 status = "okay"; 37}; 38 39&i2c0 { 40 dtt@50 { 41 compatible = "at,24c1024"; 42 reg = <0x50>; 43 }; 44}; 45 46&aemif { 47 cs0 { 48 #address-cells = <2>; 49 #size-cells = <1>; 50 clock-ranges; 51 ranges; 52 53 ti,cs-chipselect = <0>; 54 /* all timings in nanoseconds */ 55 ti,cs-min-turnaround-ns = <12>; 56 ti,cs-read-hold-ns = <6>; 57 ti,cs-read-strobe-ns = <23>; 58 ti,cs-read-setup-ns = <9>; 59 ti,cs-write-hold-ns = <8>; 60 ti,cs-write-strobe-ns = <23>; 61 ti,cs-write-setup-ns = <8>; 62 63 nand@0,0 { 64 compatible = "ti,keystone-nand","ti,davinci-nand"; 65 #address-cells = <1>; 66 #size-cells = <1>; 67 reg = <0 0 0x4000000 68 1 0 0x0000100>; 69 70 ti,davinci-chipselect = <0>; 71 ti,davinci-mask-ale = <0x2000>; 72 ti,davinci-mask-cle = <0x4000>; 73 ti,davinci-mask-chipsel = <0>; 74 nand-ecc-mode = "hw"; 75 ti,davinci-ecc-bits = <4>; 76 nand-on-flash-bbt; 77 78 partition@0 { 79 label = "u-boot"; 80 reg = <0x0 0x100000>; 81 read-only; 82 }; 83 84 partition@100000 { 85 label = "params"; 86 reg = <0x100000 0x80000>; 87 read-only; 88 }; 89 90 partition@180000 { 91 label = "ubifs"; 92 reg = <0x180000 0x7FE80000>; 93 }; 94 }; 95 }; 96}; 97 98&spi0 { 99 nor_flash: n25q128a11@0 { 100 #address-cells = <1>; 101 #size-cells = <1>; 102 compatible = "Micron,n25q128a11"; 103 spi-max-frequency = <54000000>; 104 m25p,fast-read; 105 reg = <0>; 106 107 partition@0 { 108 label = "u-boot-spl"; 109 reg = <0x0 0x80000>; 110 read-only; 111 }; 112 113 partition@1 { 114 label = "misc"; 115 reg = <0x80000 0xf80000>; 116 }; 117 }; 118}; 119 120&mdio { 121 status = "ok"; 122 ethphy0: ethernet-phy@0 { 123 compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; 124 reg = <0>; 125 }; 126 127 ethphy1: ethernet-phy@1 { 128 compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22"; 129 reg = <1>; 130 }; 131}; 132