• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1/ {
2	mbus {
3		pciec: pcie-controller {
4			compatible = "marvell,kirkwood-pcie";
5			status = "disabled";
6			device_type = "pci";
7
8			#address-cells = <3>;
9			#size-cells = <2>;
10
11			bus-range = <0x00 0xff>;
12
13			ranges =
14			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
15				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0       1 0 /* Port 0.0 MEM */
16				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0       1 0 /* Port 0.0 IO  */>;
17
18			pcie0: pcie@1,0 {
19				device_type = "pci";
20				assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>;
21				reg = <0x0800 0 0 0 0>;
22				#address-cells = <3>;
23				#size-cells = <2>;
24				#interrupt-cells = <1>;
25				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
26					  0x81000000 0 0 0x81000000 0x1 0 1 0>;
27				interrupt-map-mask = <0 0 0 0>;
28				interrupt-map = <0 0 0 0 &intc 9>;
29				marvell,pcie-port = <0>;
30				marvell,pcie-lane = <0>;
31				clocks = <&gate_clk 2>;
32				status = "disabled";
33			};
34		};
35	};
36
37	ocp@f1000000 {
38		pinctrl: pin-controller@10000 {
39			compatible = "marvell,88f6192-pinctrl";
40
41			pmx_sata0: pmx-sata0 {
42				marvell,pins = "mpp5", "mpp21", "mpp23";
43				marvell,function = "sata0";
44			};
45			pmx_sata1: pmx-sata1 {
46				marvell,pins = "mpp4", "mpp20", "mpp22";
47				marvell,function = "sata1";
48			};
49			pmx_sdio: pmx-sdio {
50				marvell,pins = "mpp12", "mpp13", "mpp14",
51					       "mpp15", "mpp16", "mpp17";
52				marvell,function = "sdio";
53			};
54		};
55
56		rtc: rtc@10300 {
57			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
58			reg = <0x10300 0x20>;
59			interrupts = <53>;
60			clocks = <&gate_clk 7>;
61		};
62
63		sata: sata@80000 {
64			compatible = "marvell,orion-sata";
65			reg = <0x80000 0x5000>;
66			interrupts = <21>;
67			clocks = <&gate_clk 14>, <&gate_clk 15>;
68			clock-names = "0", "1";
69			phys = <&sata_phy0>, <&sata_phy1>;
70			phy-names = "port0", "port1";
71			status = "disabled";
72		};
73
74		sdio: mvsdio@90000 {
75			compatible = "marvell,orion-sdio";
76			reg = <0x90000 0x200>;
77			interrupts = <28>;
78			clocks = <&gate_clk 4>;
79			bus-width = <4>;
80			cap-sdio-irq;
81			cap-sd-highspeed;
82			cap-mmc-highspeed;
83			status = "disabled";
84		};
85	};
86};
87