• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1/*
2 * ARM Ltd. Versatile Express
3 *
4 * Motherboard Express uATX
5 * V2M-P1
6 *
7 * HBI-0190D
8 *
9 * RS1 memory map ("ARM Cortex-A Series memory map" in the board's
10 * Technical Reference Manual)
11 *
12 * WARNING! The hardware described in this file is independent from the
13 * original variant (vexpress-v2m.dtsi), but there is a strong
14 * correspondence between the two configurations.
15 *
16 * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
17 * CHANGES TO vexpress-v2m.dtsi!
18 */
19
20	motherboard {
21		model = "V2M-P1";
22		arm,hbi = <0x190>;
23		arm,vexpress,site = <0>;
24		arm,v2m-memory-map = "rs1";
25		compatible = "arm,vexpress,v2m-p1", "simple-bus";
26		#address-cells = <2>; /* SMB chipselect number and offset */
27		#size-cells = <1>;
28		#interrupt-cells = <1>;
29		ranges;
30
31		flash@0,00000000 {
32			compatible = "arm,vexpress-flash", "cfi-flash";
33			reg = <0 0x00000000 0x04000000>,
34			      <4 0x00000000 0x04000000>;
35			bank-width = <4>;
36		};
37
38		psram@1,00000000 {
39			compatible = "arm,vexpress-psram", "mtd-ram";
40			reg = <1 0x00000000 0x02000000>;
41			bank-width = <4>;
42		};
43
44		v2m_video_ram: vram@2,00000000 {
45			compatible = "arm,vexpress-vram";
46			reg = <2 0x00000000 0x00800000>;
47		};
48
49		ethernet@2,02000000 {
50			compatible = "smsc,lan9118", "smsc,lan9115";
51			reg = <2 0x02000000 0x10000>;
52			interrupts = <15>;
53			phy-mode = "mii";
54			reg-io-width = <4>;
55			smsc,irq-active-high;
56			smsc,irq-push-pull;
57			vdd33a-supply = <&v2m_fixed_3v3>;
58			vddvario-supply = <&v2m_fixed_3v3>;
59		};
60
61		usb@2,03000000 {
62			compatible = "nxp,usb-isp1761";
63			reg = <2 0x03000000 0x20000>;
64			interrupts = <16>;
65			port1-otg;
66		};
67
68		iofpga@3,00000000 {
69			compatible = "arm,amba-bus", "simple-bus";
70			#address-cells = <1>;
71			#size-cells = <1>;
72			ranges = <0 3 0 0x200000>;
73
74			v2m_sysreg: sysreg@010000 {
75				compatible = "arm,vexpress-sysreg";
76				reg = <0x010000 0x1000>;
77
78				v2m_led_gpios: sys_led@08 {
79					compatible = "arm,vexpress-sysreg,sys_led";
80					gpio-controller;
81					#gpio-cells = <2>;
82				};
83
84				v2m_mmc_gpios: sys_mci@48 {
85					compatible = "arm,vexpress-sysreg,sys_mci";
86					gpio-controller;
87					#gpio-cells = <2>;
88				};
89
90				v2m_flash_gpios: sys_flash@4c {
91					compatible = "arm,vexpress-sysreg,sys_flash";
92					gpio-controller;
93					#gpio-cells = <2>;
94				};
95			};
96
97			v2m_sysctl: sysctl@020000 {
98				compatible = "arm,sp810", "arm,primecell";
99				reg = <0x020000 0x1000>;
100				clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>;
101				clock-names = "refclk", "timclk", "apb_pclk";
102				#clock-cells = <1>;
103				clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
104				assigned-clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_sysctl 3>, <&v2m_sysctl 3>;
105				assigned-clock-parents = <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>, <&v2m_refclk1mhz>;
106			};
107
108			/* PCI-E I2C bus */
109			v2m_i2c_pcie: i2c@030000 {
110				compatible = "arm,versatile-i2c";
111				reg = <0x030000 0x1000>;
112
113				#address-cells = <1>;
114				#size-cells = <0>;
115
116				pcie-switch@60 {
117					compatible = "idt,89hpes32h8";
118					reg = <0x60>;
119				};
120			};
121
122			aaci@040000 {
123				compatible = "arm,pl041", "arm,primecell";
124				reg = <0x040000 0x1000>;
125				interrupts = <11>;
126				clocks = <&smbclk>;
127				clock-names = "apb_pclk";
128			};
129
130			mmci@050000 {
131				compatible = "arm,pl180", "arm,primecell";
132				reg = <0x050000 0x1000>;
133				interrupts = <9 10>;
134				cd-gpios = <&v2m_mmc_gpios 0 0>;
135				wp-gpios = <&v2m_mmc_gpios 1 0>;
136				max-frequency = <12000000>;
137				vmmc-supply = <&v2m_fixed_3v3>;
138				clocks = <&v2m_clk24mhz>, <&smbclk>;
139				clock-names = "mclk", "apb_pclk";
140			};
141
142			kmi@060000 {
143				compatible = "arm,pl050", "arm,primecell";
144				reg = <0x060000 0x1000>;
145				interrupts = <12>;
146				clocks = <&v2m_clk24mhz>, <&smbclk>;
147				clock-names = "KMIREFCLK", "apb_pclk";
148			};
149
150			kmi@070000 {
151				compatible = "arm,pl050", "arm,primecell";
152				reg = <0x070000 0x1000>;
153				interrupts = <13>;
154				clocks = <&v2m_clk24mhz>, <&smbclk>;
155				clock-names = "KMIREFCLK", "apb_pclk";
156			};
157
158			v2m_serial0: uart@090000 {
159				compatible = "arm,pl011", "arm,primecell";
160				reg = <0x090000 0x1000>;
161				interrupts = <5>;
162				clocks = <&v2m_oscclk2>, <&smbclk>;
163				clock-names = "uartclk", "apb_pclk";
164			};
165
166			v2m_serial1: uart@0a0000 {
167				compatible = "arm,pl011", "arm,primecell";
168				reg = <0x0a0000 0x1000>;
169				interrupts = <6>;
170				clocks = <&v2m_oscclk2>, <&smbclk>;
171				clock-names = "uartclk", "apb_pclk";
172			};
173
174			v2m_serial2: uart@0b0000 {
175				compatible = "arm,pl011", "arm,primecell";
176				reg = <0x0b0000 0x1000>;
177				interrupts = <7>;
178				clocks = <&v2m_oscclk2>, <&smbclk>;
179				clock-names = "uartclk", "apb_pclk";
180			};
181
182			v2m_serial3: uart@0c0000 {
183				compatible = "arm,pl011", "arm,primecell";
184				reg = <0x0c0000 0x1000>;
185				interrupts = <8>;
186				clocks = <&v2m_oscclk2>, <&smbclk>;
187				clock-names = "uartclk", "apb_pclk";
188			};
189
190			wdt@0f0000 {
191				compatible = "arm,sp805", "arm,primecell";
192				reg = <0x0f0000 0x1000>;
193				interrupts = <0>;
194				clocks = <&v2m_refclk32khz>, <&smbclk>;
195				clock-names = "wdogclk", "apb_pclk";
196			};
197
198			v2m_timer01: timer@110000 {
199				compatible = "arm,sp804", "arm,primecell";
200				reg = <0x110000 0x1000>;
201				interrupts = <2>;
202				clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>;
203				clock-names = "timclken1", "timclken2", "apb_pclk";
204			};
205
206			v2m_timer23: timer@120000 {
207				compatible = "arm,sp804", "arm,primecell";
208				reg = <0x120000 0x1000>;
209				interrupts = <3>;
210				clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>;
211				clock-names = "timclken1", "timclken2", "apb_pclk";
212			};
213
214			/* DVI I2C bus */
215			v2m_i2c_dvi: i2c@160000 {
216				compatible = "arm,versatile-i2c";
217				reg = <0x160000 0x1000>;
218
219				#address-cells = <1>;
220				#size-cells = <0>;
221
222				dvi-transmitter@39 {
223					compatible = "sil,sii9022-tpi", "sil,sii9022";
224					reg = <0x39>;
225				};
226
227				dvi-transmitter@60 {
228					compatible = "sil,sii9022-cpi", "sil,sii9022";
229					reg = <0x60>;
230				};
231			};
232
233			rtc@170000 {
234				compatible = "arm,pl031", "arm,primecell";
235				reg = <0x170000 0x1000>;
236				interrupts = <4>;
237				clocks = <&smbclk>;
238				clock-names = "apb_pclk";
239			};
240
241			compact-flash@1a0000 {
242				compatible = "arm,vexpress-cf", "ata-generic";
243				reg = <0x1a0000 0x100
244				       0x1a0100 0xf00>;
245				reg-shift = <2>;
246			};
247
248			clcd@1f0000 {
249				compatible = "arm,pl111", "arm,primecell";
250				reg = <0x1f0000 0x1000>;
251				interrupt-names = "combined";
252				interrupts = <14>;
253				clocks = <&v2m_oscclk1>, <&smbclk>;
254				clock-names = "clcdclk", "apb_pclk";
255				memory-region = <&v2m_video_ram>;
256				max-memory-bandwidth = <50350000>; /* 16bpp @ 25.175MHz */
257
258				port {
259					v2m_clcd_pads: endpoint {
260						remote-endpoint = <&v2m_clcd_panel>;
261						arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
262					};
263				};
264
265				panel {
266					compatible = "panel-dpi";
267
268					port {
269						v2m_clcd_panel: endpoint {
270							remote-endpoint = <&v2m_clcd_pads>;
271						};
272					};
273
274					panel-timing {
275						clock-frequency = <25175000>;
276						hactive = <640>;
277						hback-porch = <40>;
278						hfront-porch = <24>;
279						hsync-len = <96>;
280						vactive = <480>;
281						vback-porch = <32>;
282						vfront-porch = <11>;
283						vsync-len = <2>;
284					};
285				};
286			};
287		};
288
289		v2m_fixed_3v3: fixedregulator@0 {
290			compatible = "regulator-fixed";
291			regulator-name = "3V3";
292			regulator-min-microvolt = <3300000>;
293			regulator-max-microvolt = <3300000>;
294			regulator-always-on;
295		};
296
297		v2m_clk24mhz: clk24mhz {
298			compatible = "fixed-clock";
299			#clock-cells = <0>;
300			clock-frequency = <24000000>;
301			clock-output-names = "v2m:clk24mhz";
302		};
303
304		v2m_refclk1mhz: refclk1mhz {
305			compatible = "fixed-clock";
306			#clock-cells = <0>;
307			clock-frequency = <1000000>;
308			clock-output-names = "v2m:refclk1mhz";
309		};
310
311		v2m_refclk32khz: refclk32khz {
312			compatible = "fixed-clock";
313			#clock-cells = <0>;
314			clock-frequency = <32768>;
315			clock-output-names = "v2m:refclk32khz";
316		};
317
318		leds {
319			compatible = "gpio-leds";
320
321			user@1 {
322				label = "v2m:green:user1";
323				gpios = <&v2m_led_gpios 0 0>;
324				linux,default-trigger = "heartbeat";
325			};
326
327			user@2 {
328				label = "v2m:green:user2";
329				gpios = <&v2m_led_gpios 1 0>;
330				linux,default-trigger = "mmc0";
331			};
332
333			user@3 {
334				label = "v2m:green:user3";
335				gpios = <&v2m_led_gpios 2 0>;
336				linux,default-trigger = "cpu0";
337			};
338
339			user@4 {
340				label = "v2m:green:user4";
341				gpios = <&v2m_led_gpios 3 0>;
342				linux,default-trigger = "cpu1";
343			};
344
345			user@5 {
346				label = "v2m:green:user5";
347				gpios = <&v2m_led_gpios 4 0>;
348				linux,default-trigger = "cpu2";
349			};
350
351			user@6 {
352				label = "v2m:green:user6";
353				gpios = <&v2m_led_gpios 5 0>;
354				linux,default-trigger = "cpu3";
355			};
356
357			user@7 {
358				label = "v2m:green:user7";
359				gpios = <&v2m_led_gpios 6 0>;
360				linux,default-trigger = "cpu4";
361			};
362
363			user@8 {
364				label = "v2m:green:user8";
365				gpios = <&v2m_led_gpios 7 0>;
366				linux,default-trigger = "cpu5";
367			};
368		};
369
370		mcc {
371			compatible = "arm,vexpress,config-bus";
372			arm,vexpress,config-bridge = <&v2m_sysreg>;
373
374			osc@0 {
375				/* MCC static memory clock */
376				compatible = "arm,vexpress-osc";
377				arm,vexpress-sysreg,func = <1 0>;
378				freq-range = <25000000 60000000>;
379				#clock-cells = <0>;
380				clock-output-names = "v2m:oscclk0";
381			};
382
383			v2m_oscclk1: osc@1 {
384				/* CLCD clock */
385				compatible = "arm,vexpress-osc";
386				arm,vexpress-sysreg,func = <1 1>;
387				freq-range = <23750000 65000000>;
388				#clock-cells = <0>;
389				clock-output-names = "v2m:oscclk1";
390			};
391
392			v2m_oscclk2: osc@2 {
393				/* IO FPGA peripheral clock */
394				compatible = "arm,vexpress-osc";
395				arm,vexpress-sysreg,func = <1 2>;
396				freq-range = <24000000 24000000>;
397				#clock-cells = <0>;
398				clock-output-names = "v2m:oscclk2";
399			};
400
401			volt@0 {
402				/* Logic level voltage */
403				compatible = "arm,vexpress-volt";
404				arm,vexpress-sysreg,func = <2 0>;
405				regulator-name = "VIO";
406				regulator-always-on;
407				label = "VIO";
408			};
409
410			temp@0 {
411				/* MCC internal operating temperature */
412				compatible = "arm,vexpress-temp";
413				arm,vexpress-sysreg,func = <4 0>;
414				label = "MCC";
415			};
416
417			reset@0 {
418				compatible = "arm,vexpress-reset";
419				arm,vexpress-sysreg,func = <5 0>;
420			};
421
422			muxfpga@0 {
423				compatible = "arm,vexpress-muxfpga";
424				arm,vexpress-sysreg,func = <7 0>;
425			};
426
427			shutdown@0 {
428				compatible = "arm,vexpress-shutdown";
429				arm,vexpress-sysreg,func = <8 0>;
430			};
431
432			reboot@0 {
433				compatible = "arm,vexpress-reboot";
434				arm,vexpress-sysreg,func = <9 0>;
435			};
436
437			dvimode@0 {
438				compatible = "arm,vexpress-dvimode";
439				arm,vexpress-sysreg,func = <11 0>;
440			};
441		};
442	};
443