1/* 2 * Copyright 2013 Freescale Semiconductor, Inc. 3 * Copyright 2013 Linaro Limited 4 * 5 * This program is free software; you can redistribute it and/or modify 6 * it under the terms of the GNU General Public License as published by 7 * the Free Software Foundation; either version 2 of the License, or 8 * (at your option) any later version. 9 */ 10 11/dts-v1/; 12#include "vf610.dtsi" 13 14/ { 15 model = "PHYTEC Cosmic/Cosmic+ Board"; 16 compatible = "phytec,vf610-cosmic", "fsl,vf610"; 17 18 chosen { 19 bootargs = "console=ttyLP1,115200"; 20 }; 21 22 memory { 23 reg = <0x80000000 0x10000000>; 24 }; 25 26 enet_ext: enet_ext { 27 compatible = "fixed-clock"; 28 #clock-cells = <0>; 29 clock-frequency = <50000000>; 30 }; 31}; 32 33&clks { 34 clocks = <&sxosc>, <&fxosc>, <&enet_ext>; 35 clock-names = "sxosc", "fxosc", "enet_ext"; 36}; 37 38&esdhc1 { 39 pinctrl-names = "default"; 40 pinctrl-0 = <&pinctrl_esdhc1>; 41 bus-width = <4>; 42 status = "okay"; 43}; 44 45&fec1 { 46 phy-mode = "rmii"; 47 pinctrl-names = "default"; 48 pinctrl-0 = <&pinctrl_fec1>; 49 status = "okay"; 50}; 51 52&iomuxc { 53 vf610-cosmic { 54 pinctrl_esdhc1: esdhc1grp { 55 fsl,pins = < 56 VF610_PAD_PTA24__ESDHC1_CLK 0x31ef 57 VF610_PAD_PTA25__ESDHC1_CMD 0x31ef 58 VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef 59 VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef 60 VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef 61 VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef 62 VF610_PAD_PTB28__GPIO_98 0x219d 63 >; 64 }; 65 66 pinctrl_fec1: fec1grp { 67 fsl,pins = < 68 VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 69 VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 70 VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 71 VF610_PAD_PTC12__ENET_RMII1_RXD1 0x30d1 72 VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 73 VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 74 VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 75 VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 76 VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 77 >; 78 }; 79 80 pinctrl_uart1: uart1grp { 81 fsl,pins = < 82 VF610_PAD_PTB4__UART1_TX 0x21a2 83 VF610_PAD_PTB5__UART1_RX 0x21a1 84 >; 85 }; 86 }; 87}; 88 89&uart1 { 90 pinctrl-names = "default"; 91 pinctrl-0 = <&pinctrl_uart1>; 92 status = "okay"; 93}; 94