• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * linux/arch/arm/mach-omap2/gpmc-smsc911x.c
3  *
4  * Copyright (C) 2009 Li-Pro.Net
5  * Stephan Linz <linz@li-pro.net>
6  *
7  * Modified from linux/arch/arm/mach-omap2/gpmc-smc91x.c
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License version 2 as
11  * published by the Free Software Foundation.
12  */
13 #define pr_fmt(fmt) "%s: " fmt, __func__
14 
15 #include <linux/kernel.h>
16 #include <linux/platform_device.h>
17 #include <linux/gpio.h>
18 #include <linux/delay.h>
19 #include <linux/interrupt.h>
20 #include <linux/io.h>
21 #include <linux/smsc911x.h>
22 
23 #include "gpmc.h"
24 #include "gpmc-smsc911x.h"
25 
26 static struct resource gpmc_smsc911x_resources[] = {
27 	[0] = {
28 		.flags		= IORESOURCE_MEM,
29 	},
30 	[1] = {
31 		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
32 	},
33 };
34 
35 static struct smsc911x_platform_config gpmc_smsc911x_config = {
36 	.phy_interface	= PHY_INTERFACE_MODE_MII,
37 	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
38 	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
39 };
40 
41 /*
42  * Initialize smsc911x device connected to the GPMC. Note that we
43  * assume that pin multiplexing is done in the board-*.c file,
44  * or in the bootloader.
45  */
gpmc_smsc911x_init(struct omap_smsc911x_platform_data * gpmc_cfg)46 void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *gpmc_cfg)
47 {
48 	struct platform_device *pdev;
49 	unsigned long cs_mem_base;
50 	int ret;
51 
52 	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
53 		pr_err("Failed to request GPMC mem region\n");
54 		return;
55 	}
56 
57 	gpmc_smsc911x_resources[0].start = cs_mem_base + 0x0;
58 	gpmc_smsc911x_resources[0].end = cs_mem_base + 0xff;
59 
60 	if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "smsc911x irq")) {
61 		pr_err("Failed to request IRQ GPIO%d\n", gpmc_cfg->gpio_irq);
62 		goto free1;
63 	}
64 
65 	gpmc_smsc911x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
66 
67 	if (gpio_is_valid(gpmc_cfg->gpio_reset)) {
68 		ret = gpio_request_one(gpmc_cfg->gpio_reset,
69 				       GPIOF_OUT_INIT_HIGH, "smsc911x reset");
70 		if (ret) {
71 			pr_err("Failed to request reset GPIO%d\n",
72 			       gpmc_cfg->gpio_reset);
73 			goto free2;
74 		}
75 
76 		gpio_set_value(gpmc_cfg->gpio_reset, 0);
77 		msleep(100);
78 		gpio_set_value(gpmc_cfg->gpio_reset, 1);
79 	}
80 
81 	gpmc_smsc911x_config.flags = gpmc_cfg->flags ? : SMSC911X_USE_16BIT;
82 
83 	pdev = platform_device_register_resndata(NULL, "smsc911x", gpmc_cfg->id,
84 		 gpmc_smsc911x_resources, ARRAY_SIZE(gpmc_smsc911x_resources),
85 		 &gpmc_smsc911x_config, sizeof(gpmc_smsc911x_config));
86 	if (IS_ERR(pdev)) {
87 		pr_err("Unable to register platform device\n");
88 		gpio_free(gpmc_cfg->gpio_reset);
89 		goto free2;
90 	}
91 
92 	return;
93 
94 free2:
95 	gpio_free(gpmc_cfg->gpio_irq);
96 free1:
97 	gpmc_cs_free(gpmc_cfg->cs);
98 
99 	pr_err("Could not initialize smsc911x device\n");
100 }
101