• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 
2 #include <asm/cache.h>
3 
4 #include "entry.h"
5 #include <asm/native/inst.h>
6 
7 #ifdef CONFIG_VIRT_CPU_ACCOUNTING_NATIVE
8 /* read ar.itc in advance, and use it before leaving bank 0 */
9 #define ACCOUNT_GET_STAMP				\
10 (pUStk) mov.m r20=ar.itc;
11 #define ACCOUNT_SYS_ENTER				\
12 (pUStk) br.call.spnt rp=account_sys_enter		\
13 	;;
14 #else
15 #define ACCOUNT_GET_STAMP
16 #define ACCOUNT_SYS_ENTER
17 #endif
18 
19 .section ".data..patch.rse", "a"
20 .previous
21 
22 /*
23  * DO_SAVE_MIN switches to the kernel stacks (if necessary) and saves
24  * the minimum state necessary that allows us to turn psr.ic back
25  * on.
26  *
27  * Assumed state upon entry:
28  *	psr.ic: off
29  *	r31:	contains saved predicates (pr)
30  *
31  * Upon exit, the state is as follows:
32  *	psr.ic: off
33  *	 r2 = points to &pt_regs.r16
34  *	 r8 = contents of ar.ccv
35  *	 r9 = contents of ar.csd
36  *	r10 = contents of ar.ssd
37  *	r11 = FPSR_DEFAULT
38  *	r12 = kernel sp (kernel virtual address)
39  *	r13 = points to current task_struct (kernel virtual address)
40  *	p15 = TRUE if psr.i is set in cr.ipsr
41  *	predicate registers (other than p2, p3, and p15), b6, r3, r14, r15:
42  *		preserved
43  *
44  * Note that psr.ic is NOT turned on by this macro.  This is so that
45  * we can pass interruption state as arguments to a handler.
46  */
47 #define IA64_NATIVE_DO_SAVE_MIN(__COVER,SAVE_IFS,EXTRA,WORKAROUND)				\
48 	mov r16=IA64_KR(CURRENT);	/* M */							\
49 	mov r27=ar.rsc;			/* M */							\
50 	mov r20=r1;			/* A */							\
51 	mov r25=ar.unat;		/* M */							\
52 	MOV_FROM_IPSR(p0,r29);		/* M */							\
53 	mov r26=ar.pfs;			/* I */							\
54 	MOV_FROM_IIP(r28);			/* M */						\
55 	mov r21=ar.fpsr;		/* M */							\
56 	__COVER;				/* B;; (or nothing) */				\
57 	;;											\
58 	adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r16;						\
59 	;;											\
60 	ld1 r17=[r16];				/* load current->thread.on_ustack flag */	\
61 	st1 [r16]=r0;				/* clear current->thread.on_ustack flag */	\
62 	adds r1=-IA64_TASK_THREAD_ON_USTACK_OFFSET,r16						\
63 	/* switch from user to kernel RBS: */							\
64 	;;											\
65 	invala;				/* M */							\
66 	SAVE_IFS;										\
67 	cmp.eq pKStk,pUStk=r0,r17;		/* are we in kernel mode already? */		\
68 	;;											\
69 (pUStk)	mov ar.rsc=0;		/* set enforced lazy mode, pl 0, little-endian, loadrs=0 */	\
70 	;;											\
71 (pUStk)	mov.m r24=ar.rnat;									\
72 (pUStk)	addl r22=IA64_RBS_OFFSET,r1;			/* compute base of RBS */		\
73 (pKStk) mov r1=sp;					/* get sp  */				\
74 	;;											\
75 (pUStk) lfetch.fault.excl.nt1 [r22];								\
76 (pUStk)	addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r1;	/* compute base of memory stack */	\
77 (pUStk)	mov r23=ar.bspstore;				/* save ar.bspstore */			\
78 	;;											\
79 (pUStk)	mov ar.bspstore=r22;				/* switch to kernel RBS */		\
80 (pKStk) addl r1=-IA64_PT_REGS_SIZE,r1;			/* if in kernel mode, use sp (r12) */	\
81 	;;											\
82 (pUStk)	mov r18=ar.bsp;										\
83 (pUStk)	mov ar.rsc=0x3;		/* set eager mode, pl 0, little-endian, loadrs=0 */		\
84 	adds r17=2*L1_CACHE_BYTES,r1;		/* really: biggest cache-line size */		\
85 	adds r16=PT(CR_IPSR),r1;								\
86 	;;											\
87 	lfetch.fault.excl.nt1 [r17],L1_CACHE_BYTES;						\
88 	st8 [r16]=r29;		/* save cr.ipsr */						\
89 	;;											\
90 	lfetch.fault.excl.nt1 [r17];								\
91 	tbit.nz p15,p0=r29,IA64_PSR_I_BIT;							\
92 	mov r29=b0										\
93 	;;											\
94 	WORKAROUND;										\
95 	adds r16=PT(R8),r1;	/* initialize first base pointer */				\
96 	adds r17=PT(R9),r1;	/* initialize second base pointer */				\
97 (pKStk)	mov r18=r0;		/* make sure r18 isn't NaT */					\
98 	;;											\
99 .mem.offset 0,0; st8.spill [r16]=r8,16;								\
100 .mem.offset 8,0; st8.spill [r17]=r9,16;								\
101         ;;											\
102 .mem.offset 0,0; st8.spill [r16]=r10,24;							\
103 .mem.offset 8,0; st8.spill [r17]=r11,24;							\
104         ;;											\
105 	st8 [r16]=r28,16;	/* save cr.iip */						\
106 	st8 [r17]=r30,16;	/* save cr.ifs */						\
107 (pUStk)	sub r18=r18,r22;	/* r18=RSE.ndirty*8 */						\
108 	mov r8=ar.ccv;										\
109 	mov r9=ar.csd;										\
110 	mov r10=ar.ssd;										\
111 	movl r11=FPSR_DEFAULT;   /* L-unit */							\
112 	;;											\
113 	st8 [r16]=r25,16;	/* save ar.unat */						\
114 	st8 [r17]=r26,16;	/* save ar.pfs */						\
115 	shl r18=r18,16;		/* compute ar.rsc to be used for "loadrs" */			\
116 	;;											\
117 	st8 [r16]=r27,16;	/* save ar.rsc */						\
118 (pUStk)	st8 [r17]=r24,16;	/* save ar.rnat */						\
119 (pKStk)	adds r17=16,r17;	/* skip over ar_rnat field */					\
120 	;;			/* avoid RAW on r16 & r17 */					\
121 (pUStk)	st8 [r16]=r23,16;	/* save ar.bspstore */						\
122 	st8 [r17]=r31,16;	/* save predicates */						\
123 (pKStk)	adds r16=16,r16;	/* skip over ar_bspstore field */				\
124 	;;											\
125 	st8 [r16]=r29,16;	/* save b0 */							\
126 	st8 [r17]=r18,16;	/* save ar.rsc value for "loadrs" */				\
127 	cmp.eq pNonSys,pSys=r0,r0	/* initialize pSys=0, pNonSys=1 */			\
128 	;;											\
129 .mem.offset 0,0; st8.spill [r16]=r20,16;	/* save original r1 */				\
130 .mem.offset 8,0; st8.spill [r17]=r12,16;							\
131 	adds r12=-16,r1;	/* switch to kernel memory stack (with 16 bytes of scratch) */	\
132 	;;											\
133 .mem.offset 0,0; st8.spill [r16]=r13,16;							\
134 .mem.offset 8,0; st8.spill [r17]=r21,16;	/* save ar.fpsr */				\
135 	mov r13=IA64_KR(CURRENT);	/* establish `current' */				\
136 	;;											\
137 .mem.offset 0,0; st8.spill [r16]=r15,16;							\
138 .mem.offset 8,0; st8.spill [r17]=r14,16;							\
139 	;;											\
140 .mem.offset 0,0; st8.spill [r16]=r2,16;								\
141 .mem.offset 8,0; st8.spill [r17]=r3,16;								\
142 	ACCOUNT_GET_STAMP									\
143 	adds r2=IA64_PT_REGS_R16_OFFSET,r1;							\
144 	;;											\
145 	EXTRA;											\
146 	movl r1=__gp;		/* establish kernel global pointer */				\
147 	;;											\
148 	ACCOUNT_SYS_ENTER									\
149 	bsw.1;			/* switch back to bank 1 (must be last in insn group) */	\
150 	;;
151 
152 /*
153  * SAVE_REST saves the remainder of pt_regs (with psr.ic on).
154  *
155  * Assumed state upon entry:
156  *	psr.ic: on
157  *	r2:	points to &pt_regs.r16
158  *	r3:	points to &pt_regs.r17
159  *	r8:	contents of ar.ccv
160  *	r9:	contents of ar.csd
161  *	r10:	contents of ar.ssd
162  *	r11:	FPSR_DEFAULT
163  *
164  * Registers r14 and r15 are guaranteed not to be touched by SAVE_REST.
165  */
166 #define SAVE_REST				\
167 .mem.offset 0,0; st8.spill [r2]=r16,16;		\
168 .mem.offset 8,0; st8.spill [r3]=r17,16;		\
169 	;;					\
170 .mem.offset 0,0; st8.spill [r2]=r18,16;		\
171 .mem.offset 8,0; st8.spill [r3]=r19,16;		\
172 	;;					\
173 .mem.offset 0,0; st8.spill [r2]=r20,16;		\
174 .mem.offset 8,0; st8.spill [r3]=r21,16;		\
175 	mov r18=b6;				\
176 	;;					\
177 .mem.offset 0,0; st8.spill [r2]=r22,16;		\
178 .mem.offset 8,0; st8.spill [r3]=r23,16;		\
179 	mov r19=b7;				\
180 	;;					\
181 .mem.offset 0,0; st8.spill [r2]=r24,16;		\
182 .mem.offset 8,0; st8.spill [r3]=r25,16;		\
183 	;;					\
184 .mem.offset 0,0; st8.spill [r2]=r26,16;		\
185 .mem.offset 8,0; st8.spill [r3]=r27,16;		\
186 	;;					\
187 .mem.offset 0,0; st8.spill [r2]=r28,16;		\
188 .mem.offset 8,0; st8.spill [r3]=r29,16;		\
189 	;;					\
190 .mem.offset 0,0; st8.spill [r2]=r30,16;		\
191 .mem.offset 8,0; st8.spill [r3]=r31,32;		\
192 	;;					\
193 	mov ar.fpsr=r11;	/* M-unit */	\
194 	st8 [r2]=r8,8;		/* ar.ccv */	\
195 	adds r24=PT(B6)-PT(F7),r3;		\
196 	;;					\
197 	stf.spill [r2]=f6,32;			\
198 	stf.spill [r3]=f7,32;			\
199 	;;					\
200 	stf.spill [r2]=f8,32;			\
201 	stf.spill [r3]=f9,32;			\
202 	;;					\
203 	stf.spill [r2]=f10;			\
204 	stf.spill [r3]=f11;			\
205 	adds r25=PT(B7)-PT(F11),r3;		\
206 	;;					\
207 	st8 [r24]=r18,16;       /* b6 */	\
208 	st8 [r25]=r19,16;       /* b7 */	\
209 	;;					\
210 	st8 [r24]=r9;        	/* ar.csd */	\
211 	st8 [r25]=r10;      	/* ar.ssd */	\
212 	;;
213 
214 #define RSE_WORKAROUND				\
215 (pUStk) extr.u r17=r18,3,6;			\
216 (pUStk)	sub r16=r18,r22;			\
217 [1:](pKStk)	br.cond.sptk.many 1f;		\
218 	.xdata4 ".data..patch.rse",1b-.		\
219 	;;					\
220 	cmp.ge p6,p7 = 33,r17;			\
221 	;;					\
222 (p6)	mov r17=0x310;				\
223 (p7)	mov r17=0x308;				\
224 	;;					\
225 	cmp.leu p1,p0=r16,r17;			\
226 (p1)	br.cond.sptk.many 1f;			\
227 	dep.z r17=r26,0,62;			\
228 	movl r16=2f;				\
229 	;;					\
230 	mov ar.pfs=r17;				\
231 	dep r27=r0,r27,16,14;			\
232 	mov b0=r16;				\
233 	;;					\
234 	br.ret.sptk b0;				\
235 	;;					\
236 2:						\
237 	mov ar.rsc=r0				\
238 	;;					\
239 	flushrs;				\
240 	;;					\
241 	mov ar.bspstore=r22			\
242 	;;					\
243 	mov r18=ar.bsp;				\
244 	;;					\
245 1:						\
246 	.pred.rel "mutex", pKStk, pUStk
247 
248 #define SAVE_MIN_WITH_COVER	DO_SAVE_MIN(COVER, mov r30=cr.ifs, , RSE_WORKAROUND)
249 #define SAVE_MIN_WITH_COVER_R19	DO_SAVE_MIN(COVER, mov r30=cr.ifs, mov r15=r19, RSE_WORKAROUND)
250 #define SAVE_MIN			DO_SAVE_MIN(     , mov r30=r0, , )
251