• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1/ {
2	#address-cells = <1>;
3	#size-cells = <1>;
4	compatible = "brcm,bcm7346";
5
6	cpus {
7		#address-cells = <1>;
8		#size-cells = <0>;
9
10		mips-hpt-frequency = <163125000>;
11
12		cpu@0 {
13			compatible = "brcm,bmips5000";
14			device_type = "cpu";
15			reg = <0>;
16		};
17
18		cpu@1 {
19			compatible = "brcm,bmips5000";
20			device_type = "cpu";
21			reg = <1>;
22		};
23	};
24
25	aliases {
26		uart0 = &uart0;
27		uart1 = &uart1;
28		uart2 = &uart2;
29	};
30
31	cpu_intc: cpu_intc {
32		#address-cells = <0>;
33		compatible = "mti,cpu-interrupt-controller";
34
35		interrupt-controller;
36		#interrupt-cells = <1>;
37	};
38
39	clocks {
40		uart_clk: uart_clk {
41			compatible = "fixed-clock";
42			#clock-cells = <0>;
43			clock-frequency = <81000000>;
44		};
45	};
46
47	rdb {
48		#address-cells = <1>;
49		#size-cells = <1>;
50
51		compatible = "simple-bus";
52		ranges = <0 0x10000000 0x01000000>;
53
54		periph_intc: periph_intc@411400 {
55			compatible = "brcm,bcm7038-l1-intc";
56			reg = <0x411400 0x30>, <0x411600 0x30>;
57
58			interrupt-controller;
59			#interrupt-cells = <1>;
60
61			interrupt-parent = <&cpu_intc>;
62			interrupts = <2>, <3>;
63		};
64
65		sun_l2_intc: sun_l2_intc@403000 {
66			compatible = "brcm,l2-intc";
67			reg = <0x403000 0x30>;
68			interrupt-controller;
69			#interrupt-cells = <1>;
70			interrupt-parent = <&periph_intc>;
71			interrupts = <51>;
72		};
73
74		gisb-arb@400000 {
75			compatible = "brcm,bcm7400-gisb-arb";
76			reg = <0x400000 0xdc>;
77			native-endian;
78			interrupt-parent = <&sun_l2_intc>;
79			interrupts = <0>, <2>;
80			brcm,gisb-arb-master-mask = <0x673>;
81			brcm,gisb-arb-master-names = "ssp_0", "cpu_0", "bsp_0",
82						     "rdc_0", "raaga_0",
83						     "jtag_0", "svd_0";
84		};
85
86		upg_irq0_intc: upg_irq0_intc@406780 {
87			compatible = "brcm,bcm7120-l2-intc";
88			reg = <0x406780 0x8>;
89
90			brcm,int-map-mask = <0x44>, <0xf000000>;
91			brcm,int-fwd-mask = <0x70000>;
92
93			interrupt-controller;
94			#interrupt-cells = <1>;
95
96			interrupt-parent = <&periph_intc>;
97			interrupts = <59>, <57>;
98			interrupt-names = "upg_main", "upg_bsc";
99		};
100
101		upg_aon_irq0_intc: upg_aon_irq0_intc@408b80 {
102			compatible = "brcm,bcm7120-l2-intc";
103			reg = <0x408b80 0x8>;
104
105			brcm,int-map-mask = <0x40>, <0x8000000>, <0x100000>;
106			brcm,int-fwd-mask = <0>;
107			brcm,irq-can-wake;
108
109			interrupt-controller;
110			#interrupt-cells = <1>;
111
112			interrupt-parent = <&periph_intc>;
113			interrupts = <60>, <58>, <62>;
114			interrupt-names = "upg_main_aon", "upg_bsc_aon",
115					  "upg_spi";
116		};
117
118		sun_top_ctrl: syscon@404000 {
119			compatible = "brcm,bcm7346-sun-top-ctrl", "syscon";
120			reg = <0x404000 0x51c>;
121			little-endian;
122		};
123
124		reboot {
125			compatible = "brcm,brcmstb-reboot";
126			syscon = <&sun_top_ctrl 0x304 0x308>;
127		};
128
129		uart0: serial@406900 {
130			compatible = "ns16550a";
131			reg = <0x406900 0x20>;
132			reg-io-width = <0x4>;
133			reg-shift = <0x2>;
134			native-endian;
135			interrupt-parent = <&periph_intc>;
136			interrupts = <64>;
137			clocks = <&uart_clk>;
138			status = "disabled";
139		};
140
141		uart1: serial@406940 {
142			compatible = "ns16550a";
143			reg = <0x406940 0x20>;
144			reg-io-width = <0x4>;
145			reg-shift = <0x2>;
146			native-endian;
147			interrupt-parent = <&periph_intc>;
148			interrupts = <65>;
149			clocks = <&uart_clk>;
150			status = "disabled";
151		};
152
153		uart2: serial@406980 {
154			compatible = "ns16550a";
155			reg = <0x406980 0x20>;
156			reg-io-width = <0x4>;
157			reg-shift = <0x2>;
158			native-endian;
159			interrupt-parent = <&periph_intc>;
160			interrupts = <66>;
161			clocks = <&uart_clk>;
162			status = "disabled";
163		};
164
165		bsca: i2c@406200 {
166		      clock-frequency = <390000>;
167		      compatible = "brcm,brcmstb-i2c";
168		      interrupt-parent = <&upg_irq0_intc>;
169		      reg = <0x406200 0x58>;
170		      interrupts = <24>;
171		      interrupt-names = "upg_bsca";
172		      status = "disabled";
173		};
174
175		bscb: i2c@406280 {
176		      clock-frequency = <390000>;
177		      compatible = "brcm,brcmstb-i2c";
178		      interrupt-parent = <&upg_irq0_intc>;
179		      reg = <0x406280 0x58>;
180		      interrupts = <25>;
181		      interrupt-names = "upg_bscb";
182		      status = "disabled";
183		};
184
185		bscc: i2c@406300 {
186		      clock-frequency = <390000>;
187		      compatible = "brcm,brcmstb-i2c";
188		      interrupt-parent = <&upg_irq0_intc>;
189		      reg = <0x406300 0x58>;
190		      interrupts = <26>;
191		      interrupt-names = "upg_bscc";
192		      status = "disabled";
193		};
194
195		bscd: i2c@406380 {
196		      clock-frequency = <390000>;
197		      compatible = "brcm,brcmstb-i2c";
198		      interrupt-parent = <&upg_irq0_intc>;
199		      reg = <0x406380 0x58>;
200		      interrupts = <27>;
201		      interrupt-names = "upg_bscd";
202		      status = "disabled";
203		};
204
205		bsce: i2c@408980 {
206		      clock-frequency = <390000>;
207		      compatible = "brcm,brcmstb-i2c";
208		      interrupt-parent = <&upg_aon_irq0_intc>;
209		      reg = <0x408980 0x58>;
210		      interrupts = <27>;
211		      interrupt-names = "upg_bsce";
212		      status = "disabled";
213		};
214
215		enet0: ethernet@430000 {
216			phy-mode = "internal";
217			phy-handle = <&phy1>;
218			mac-address = [ 00 10 18 36 23 1a ];
219			compatible = "brcm,genet-v2";
220			#address-cells = <0x1>;
221			#size-cells = <0x1>;
222			reg = <0x430000 0x4c8c>;
223			interrupts = <24>, <25>;
224			interrupt-parent = <&periph_intc>;
225			status = "disabled";
226
227			mdio@e14 {
228				compatible = "brcm,genet-mdio-v2";
229				#address-cells = <0x1>;
230				#size-cells = <0x0>;
231				reg = <0xe14 0x8>;
232
233				phy1: ethernet-phy@1 {
234					max-speed = <100>;
235					reg = <0x1>;
236					compatible = "brcm,40nm-ephy",
237						"ethernet-phy-ieee802.3-c22";
238				};
239			};
240		};
241
242		ehci0: usb@480300 {
243			compatible = "brcm,bcm7346-ehci", "generic-ehci";
244			reg = <0x480300 0x100>;
245			native-endian;
246			interrupt-parent = <&periph_intc>;
247			interrupts = <68>;
248			status = "disabled";
249		};
250
251		ohci0: usb@480400 {
252			compatible = "brcm,bcm7346-ohci", "generic-ohci";
253			reg = <0x480400 0x100>;
254			native-endian;
255			no-big-frame-no;
256			interrupt-parent = <&periph_intc>;
257			interrupts = <70>;
258			status = "disabled";
259		};
260
261		ehci1: usb@480500 {
262			compatible = "brcm,bcm7346-ehci", "generic-ehci";
263			reg = <0x480500 0x100>;
264			native-endian;
265			interrupt-parent = <&periph_intc>;
266			interrupts = <69>;
267			status = "disabled";
268		};
269
270		ohci1: usb@480600 {
271			compatible = "brcm,bcm7346-ohci", "generic-ohci";
272			reg = <0x480600 0x100>;
273			native-endian;
274			no-big-frame-no;
275			interrupt-parent = <&periph_intc>;
276			interrupts = <71>;
277			status = "disabled";
278		};
279
280		ehci2: usb@490300 {
281			compatible = "brcm,bcm7346-ehci", "generic-ehci";
282			reg = <0x490300 0x100>;
283			native-endian;
284			interrupt-parent = <&periph_intc>;
285			interrupts = <73>;
286			status = "disabled";
287		};
288
289		ohci2: usb@490400 {
290			compatible = "brcm,bcm7346-ohci", "generic-ohci";
291			reg = <0x490400 0x100>;
292			native-endian;
293			no-big-frame-no;
294			interrupt-parent = <&periph_intc>;
295			interrupts = <75>;
296			status = "disabled";
297		};
298
299		ehci3: usb@490500 {
300			compatible = "brcm,bcm7346-ehci", "generic-ehci";
301			reg = <0x490500 0x100>;
302			native-endian;
303			interrupt-parent = <&periph_intc>;
304			interrupts = <74>;
305			status = "disabled";
306		};
307
308		ohci3: usb@490600 {
309			compatible = "brcm,bcm7346-ohci", "generic-ohci";
310			reg = <0x490600 0x100>;
311			native-endian;
312			no-big-frame-no;
313			interrupt-parent = <&periph_intc>;
314			interrupts = <76>;
315			status = "disabled";
316		};
317
318		sata: sata@181000 {
319			compatible = "brcm,bcm7425-ahci", "brcm,sata3-ahci";
320			reg-names = "ahci", "top-ctrl";
321			reg = <0x181000 0xa9c>, <0x180020 0x1c>;
322			interrupt-parent = <&periph_intc>;
323			interrupts = <40>;
324			#address-cells = <1>;
325			#size-cells = <0>;
326			brcm,broken-ncq;
327			brcm,broken-phy;
328			status = "disabled";
329
330			sata0: sata-port@0 {
331				reg = <0>;
332				phys = <&sata_phy0>;
333			};
334
335			sata1: sata-port@1 {
336				reg = <1>;
337				phys = <&sata_phy1>;
338			};
339		};
340
341		sata_phy: sata-phy@1800000 {
342			compatible = "brcm,bcm7425-sata-phy", "brcm,phy-sata3";
343			reg = <0x180100 0x0eff>;
344			reg-names = "phy";
345			#address-cells = <1>;
346			#size-cells = <0>;
347			status = "disabled";
348
349			sata_phy0: sata-phy@0 {
350				reg = <0>;
351				#phy-cells = <0>;
352			};
353
354			sata_phy1: sata-phy@1 {
355				reg = <1>;
356				#phy-cells = <0>;
357			};
358		};
359	};
360};
361