1 /*
2 * ALPHAPROJECT AP-SH4A-3A Support.
3 *
4 * Copyright (C) 2010 ALPHAPROJECT Co.,Ltd.
5 * Copyright (C) 2008 Yoshihiro Shimoda
6 * Copyright (C) 2009 Paul Mundt
7 *
8 * This file is subject to the terms and conditions of the GNU General Public
9 * License. See the file "COPYING" in the main directory of this archive
10 * for more details.
11 */
12 #include <linux/init.h>
13 #include <linux/platform_device.h>
14 #include <linux/io.h>
15 #include <linux/mtd/physmap.h>
16 #include <linux/regulator/fixed.h>
17 #include <linux/regulator/machine.h>
18 #include <linux/smsc911x.h>
19 #include <linux/irq.h>
20 #include <linux/clk.h>
21 #include <asm/machvec.h>
22 #include <asm/sizes.h>
23 #include <asm/clock.h>
24
25 static struct mtd_partition nor_flash_partitions[] = {
26 {
27 .name = "loader",
28 .offset = 0x00000000,
29 .size = 512 * 1024,
30 },
31 {
32 .name = "bootenv",
33 .offset = MTDPART_OFS_APPEND,
34 .size = 512 * 1024,
35 },
36 {
37 .name = "kernel",
38 .offset = MTDPART_OFS_APPEND,
39 .size = 4 * 1024 * 1024,
40 },
41 {
42 .name = "data",
43 .offset = MTDPART_OFS_APPEND,
44 .size = MTDPART_SIZ_FULL,
45 },
46 };
47
48 static struct physmap_flash_data nor_flash_data = {
49 .width = 4,
50 .parts = nor_flash_partitions,
51 .nr_parts = ARRAY_SIZE(nor_flash_partitions),
52 };
53
54 static struct resource nor_flash_resources[] = {
55 [0] = {
56 .start = 0x00000000,
57 .end = 0x01000000 - 1,
58 .flags = IORESOURCE_MEM,
59 }
60 };
61
62 static struct platform_device nor_flash_device = {
63 .name = "physmap-flash",
64 .dev = {
65 .platform_data = &nor_flash_data,
66 },
67 .num_resources = ARRAY_SIZE(nor_flash_resources),
68 .resource = nor_flash_resources,
69 };
70
71 /* Dummy supplies, where voltage doesn't matter */
72 static struct regulator_consumer_supply dummy_supplies[] = {
73 REGULATOR_SUPPLY("vddvario", "smsc911x"),
74 REGULATOR_SUPPLY("vdd33a", "smsc911x"),
75 };
76
77 static struct resource smsc911x_resources[] = {
78 [0] = {
79 .name = "smsc911x-memory",
80 .start = 0xA4000000,
81 .end = 0xA4000000 + SZ_256 - 1,
82 .flags = IORESOURCE_MEM,
83 },
84 [1] = {
85 .name = "smsc911x-irq",
86 .start = evt2irq(0x200),
87 .end = evt2irq(0x200),
88 .flags = IORESOURCE_IRQ,
89 },
90 };
91
92 static struct smsc911x_platform_config smsc911x_config = {
93 .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
94 .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
95 .flags = SMSC911X_USE_16BIT,
96 .phy_interface = PHY_INTERFACE_MODE_MII,
97 };
98
99 static struct platform_device smsc911x_device = {
100 .name = "smsc911x",
101 .id = -1,
102 .num_resources = ARRAY_SIZE(smsc911x_resources),
103 .resource = smsc911x_resources,
104 .dev = {
105 .platform_data = &smsc911x_config,
106 },
107 };
108
109 static struct platform_device *apsh4a3a_devices[] __initdata = {
110 &nor_flash_device,
111 &smsc911x_device,
112 };
113
apsh4a3a_devices_setup(void)114 static int __init apsh4a3a_devices_setup(void)
115 {
116 regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
117
118 return platform_add_devices(apsh4a3a_devices,
119 ARRAY_SIZE(apsh4a3a_devices));
120 }
121 device_initcall(apsh4a3a_devices_setup);
122
apsh4a3a_clk_init(void)123 static int apsh4a3a_clk_init(void)
124 {
125 struct clk *clk;
126 int ret;
127
128 clk = clk_get(NULL, "extal");
129 if (IS_ERR(clk))
130 return PTR_ERR(clk);
131 ret = clk_set_rate(clk, 33333000);
132 clk_put(clk);
133
134 return ret;
135 }
136
137 /* Initialize the board */
apsh4a3a_setup(char ** cmdline_p)138 static void __init apsh4a3a_setup(char **cmdline_p)
139 {
140 printk(KERN_INFO "Alpha Project AP-SH4A-3A support:\n");
141 }
142
apsh4a3a_init_irq(void)143 static void __init apsh4a3a_init_irq(void)
144 {
145 plat_irq_setup_pins(IRQ_MODE_IRQ7654);
146 }
147
148 /* Return the board specific boot mode pin configuration */
apsh4a3a_mode_pins(void)149 static int apsh4a3a_mode_pins(void)
150 {
151 int value = 0;
152
153 /* These are the factory default settings of SW1 and SW2.
154 * If you change these dip switches then you will need to
155 * adjust the values below as well.
156 */
157 value &= ~MODE_PIN0; /* Clock Mode 16 */
158 value &= ~MODE_PIN1;
159 value &= ~MODE_PIN2;
160 value &= ~MODE_PIN3;
161 value |= MODE_PIN4;
162 value &= ~MODE_PIN5; /* 16-bit Area0 bus width */
163 value |= MODE_PIN6; /* Area 0 SRAM interface */
164 value |= MODE_PIN7;
165 value |= MODE_PIN8; /* Little Endian */
166 value |= MODE_PIN9; /* Master Mode */
167 value |= MODE_PIN10; /* Crystal resonator */
168 value |= MODE_PIN11; /* Display Unit */
169 value |= MODE_PIN12;
170 value &= ~MODE_PIN13; /* 29-bit address mode */
171 value |= MODE_PIN14; /* No PLL step-up */
172
173 return value;
174 }
175
176 /*
177 * The Machine Vector
178 */
179 static struct sh_machine_vector mv_apsh4a3a __initmv = {
180 .mv_name = "AP-SH4A-3A",
181 .mv_setup = apsh4a3a_setup,
182 .mv_clk_init = apsh4a3a_clk_init,
183 .mv_init_irq = apsh4a3a_init_irq,
184 .mv_mode_pins = apsh4a3a_mode_pins,
185 };
186