1 /*
2 * cpu-sa1100.c: clock scaling for the SA1100
3 *
4 * Copyright (C) 2000 2001, The Delft University of Technology
5 *
6 * Authors:
7 * - Johan Pouwelse (J.A.Pouwelse@its.tudelft.nl): initial version
8 * - Erik Mouw (J.A.K.Mouw@its.tudelft.nl):
9 * - major rewrite for linux-2.3.99
10 * - rewritten for the more generic power management scheme in
11 * linux-2.4.5-rmk1
12 *
13 * This software has been developed while working on the LART
14 * computing board (http://www.lartmaker.nl/), which is
15 * sponsored by the Mobile Multi-media Communications
16 * (http://www.mobimedia.org/) and Ubiquitous Communications
17 * (http://www.ubicom.tudelft.nl/) projects.
18 *
19 * The authors can be reached at:
20 *
21 * Erik Mouw
22 * Information and Communication Theory Group
23 * Faculty of Information Technology and Systems
24 * Delft University of Technology
25 * P.O. Box 5031
26 * 2600 GA Delft
27 * The Netherlands
28 *
29 *
30 * This program is free software; you can redistribute it and/or modify
31 * it under the terms of the GNU General Public License as published by
32 * the Free Software Foundation; either version 2 of the License, or
33 * (at your option) any later version.
34 *
35 * This program is distributed in the hope that it will be useful,
36 * but WITHOUT ANY WARRANTY; without even the implied warranty of
37 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
38 * GNU General Public License for more details.
39 *
40 * You should have received a copy of the GNU General Public License
41 * along with this program; if not, write to the Free Software
42 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
43 *
44 *
45 * Theory of operations
46 * ====================
47 *
48 * Clock scaling can be used to lower the power consumption of the CPU
49 * core. This will give you a somewhat longer running time.
50 *
51 * The SA-1100 has a single register to change the core clock speed:
52 *
53 * PPCR 0x90020014 PLL config
54 *
55 * However, the DRAM timings are closely related to the core clock
56 * speed, so we need to change these, too. The used registers are:
57 *
58 * MDCNFG 0xA0000000 DRAM config
59 * MDCAS0 0xA0000004 Access waveform
60 * MDCAS1 0xA0000008 Access waveform
61 * MDCAS2 0xA000000C Access waveform
62 *
63 * Care must be taken to change the DRAM parameters the correct way,
64 * because otherwise the DRAM becomes unusable and the kernel will
65 * crash.
66 *
67 * The simple solution to avoid a kernel crash is to put the actual
68 * clock change in ROM and jump to that code from the kernel. The main
69 * disadvantage is that the ROM has to be modified, which is not
70 * possible on all SA-1100 platforms. Another disadvantage is that
71 * jumping to ROM makes clock switching unnecessary complicated.
72 *
73 * The idea behind this driver is that the memory configuration can be
74 * changed while running from DRAM (even with interrupts turned on!)
75 * as long as all re-configuration steps yield a valid DRAM
76 * configuration. The advantages are clear: it will run on all SA-1100
77 * platforms, and the code is very simple.
78 *
79 * If you really want to understand what is going on in
80 * sa1100_update_dram_timings(), you'll have to read sections 8.2,
81 * 9.5.7.3, and 10.2 from the "Intel StrongARM SA-1100 Microprocessor
82 * Developers Manual" (available for free from Intel).
83 *
84 */
85
86 #include <linux/kernel.h>
87 #include <linux/types.h>
88 #include <linux/init.h>
89 #include <linux/cpufreq.h>
90 #include <linux/io.h>
91
92 #include <asm/cputype.h>
93
94 #include <mach/generic.h>
95 #include <mach/hardware.h>
96
97 struct sa1100_dram_regs {
98 int speed;
99 u32 mdcnfg;
100 u32 mdcas0;
101 u32 mdcas1;
102 u32 mdcas2;
103 };
104
105
106 static struct cpufreq_driver sa1100_driver;
107
108 static struct sa1100_dram_regs sa1100_dram_settings[] = {
109 /*speed, mdcnfg, mdcas0, mdcas1, mdcas2, clock freq */
110 { 59000, 0x00dc88a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 59.0 MHz */
111 { 73700, 0x011490a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 73.7 MHz */
112 { 88500, 0x014e90a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 88.5 MHz */
113 {103200, 0x01889923, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 103.2 MHz */
114 {118000, 0x01c29923, 0x9999998f, 0xfffffff9, 0xffffffff},/* 118.0 MHz */
115 {132700, 0x01fb2123, 0x9999998f, 0xfffffff9, 0xffffffff},/* 132.7 MHz */
116 {147500, 0x02352123, 0x3333330f, 0xfffffff3, 0xffffffff},/* 147.5 MHz */
117 {162200, 0x026b29a3, 0x38e38e1f, 0xfff8e38e, 0xffffffff},/* 162.2 MHz */
118 {176900, 0x02a329a3, 0x71c71c1f, 0xfff1c71c, 0xffffffff},/* 176.9 MHz */
119 {191700, 0x02dd31a3, 0xe38e383f, 0xffe38e38, 0xffffffff},/* 191.7 MHz */
120 {206400, 0x03153223, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 206.4 MHz */
121 {221200, 0x034fba23, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 221.2 MHz */
122 {235900, 0x03853a23, 0xe1e1e07f, 0xe1e1e1e1, 0xffffffe1},/* 235.9 MHz */
123 {250700, 0x03bf3aa3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 250.7 MHz */
124 {265400, 0x03f7c2a3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 265.4 MHz */
125 {280200, 0x0431c2a3, 0x878780ff, 0x87878787, 0xffffff87},/* 280.2 MHz */
126 { 0, 0, 0, 0, 0 } /* last entry */
127 };
128
sa1100_update_dram_timings(int current_speed,int new_speed)129 static void sa1100_update_dram_timings(int current_speed, int new_speed)
130 {
131 struct sa1100_dram_regs *settings = sa1100_dram_settings;
132
133 /* find speed */
134 while (settings->speed != 0) {
135 if (new_speed == settings->speed)
136 break;
137
138 settings++;
139 }
140
141 if (settings->speed == 0) {
142 panic("%s: couldn't find dram setting for speed %d\n",
143 __func__, new_speed);
144 }
145
146 /* No risk, no fun: run with interrupts on! */
147 if (new_speed > current_speed) {
148 /* We're going FASTER, so first relax the memory
149 * timings before changing the core frequency
150 */
151
152 /* Half the memory access clock */
153 MDCNFG |= MDCNFG_CDB2;
154
155 /* The order of these statements IS important, keep 8
156 * pulses!!
157 */
158 MDCAS2 = settings->mdcas2;
159 MDCAS1 = settings->mdcas1;
160 MDCAS0 = settings->mdcas0;
161 MDCNFG = settings->mdcnfg;
162 } else {
163 /* We're going SLOWER: first decrease the core
164 * frequency and then tighten the memory settings.
165 */
166
167 /* Half the memory access clock */
168 MDCNFG |= MDCNFG_CDB2;
169
170 /* The order of these statements IS important, keep 8
171 * pulses!!
172 */
173 MDCAS0 = settings->mdcas0;
174 MDCAS1 = settings->mdcas1;
175 MDCAS2 = settings->mdcas2;
176 MDCNFG = settings->mdcnfg;
177 }
178 }
179
sa1100_target(struct cpufreq_policy * policy,unsigned int ppcr)180 static int sa1100_target(struct cpufreq_policy *policy, unsigned int ppcr)
181 {
182 unsigned int cur = sa11x0_getspeed(0);
183 unsigned int new_freq;
184
185 new_freq = sa11x0_freq_table[ppcr].frequency;
186
187 if (new_freq > cur)
188 sa1100_update_dram_timings(cur, new_freq);
189
190 PPCR = ppcr;
191
192 if (new_freq < cur)
193 sa1100_update_dram_timings(cur, new_freq);
194
195 return 0;
196 }
197
sa1100_cpu_init(struct cpufreq_policy * policy)198 static int __init sa1100_cpu_init(struct cpufreq_policy *policy)
199 {
200 return cpufreq_generic_init(policy, sa11x0_freq_table, CPUFREQ_ETERNAL);
201 }
202
203 static struct cpufreq_driver sa1100_driver __refdata = {
204 .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK,
205 .verify = cpufreq_generic_frequency_table_verify,
206 .target_index = sa1100_target,
207 .get = sa11x0_getspeed,
208 .init = sa1100_cpu_init,
209 .name = "sa1100",
210 };
211
sa1100_dram_init(void)212 static int __init sa1100_dram_init(void)
213 {
214 if (cpu_is_sa1100())
215 return cpufreq_register_driver(&sa1100_driver);
216 else
217 return -ENODEV;
218 }
219
220 arch_initcall(sa1100_dram_init);
221