1 /*
2 * Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation.
3 * All rights reserved.
4 * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
5 *
6 * This software is available to you under a choice of one of two
7 * licenses. You may choose to be licensed under the terms of the GNU
8 * General Public License (GPL) Version 2, available from the file
9 * COPYING in the main directory of this source tree, or the
10 * OpenIB.org BSD license below:
11 *
12 * Redistribution and use in source and binary forms, with or
13 * without modification, are permitted provided that the following
14 * conditions are met:
15 *
16 * - Redistributions of source code must retain the above
17 * copyright notice, this list of conditions and the following
18 * disclaimer.
19 *
20 * - Redistributions in binary form must reproduce the above
21 * copyright notice, this list of conditions and the following
22 * disclaimer in the documentation and/or other materials
23 * provided with the distribution.
24 *
25 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
26 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
27 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
28 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
29 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
30 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
31 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
32 * SOFTWARE.
33 */
34
35 #ifndef _QIB_COMMON_H
36 #define _QIB_COMMON_H
37
38 /*
39 * This file contains defines, structures, etc. that are used
40 * to communicate between kernel and user code.
41 */
42
43 /* This is the IEEE-assigned OUI for QLogic Inc. QLogic_IB */
44 #define QIB_SRC_OUI_1 0x00
45 #define QIB_SRC_OUI_2 0x11
46 #define QIB_SRC_OUI_3 0x75
47
48 /* version of protocol header (known to chip also). In the long run,
49 * we should be able to generate and accept a range of version numbers;
50 * for now we only accept one, and it's compiled in.
51 */
52 #define IPS_PROTO_VERSION 2
53
54 /*
55 * These are compile time constants that you may want to enable or disable
56 * if you are trying to debug problems with code or performance.
57 * QIB_VERBOSE_TRACING define as 1 if you want additional tracing in
58 * fastpath code
59 * QIB_TRACE_REGWRITES define as 1 if you want register writes to be
60 * traced in faspath code
61 * _QIB_TRACING define as 0 if you want to remove all tracing in a
62 * compilation unit
63 */
64
65 /*
66 * The value in the BTH QP field that QLogic_IB uses to differentiate
67 * an qlogic_ib protocol IB packet vs standard IB transport
68 * This it needs to be even (0x656b78), because the LSB is sometimes
69 * used for the MSB of context. The change may cause a problem
70 * interoperating with older software.
71 */
72 #define QIB_KD_QP 0x656b78
73
74 /*
75 * These are the status bits readable (in ascii form, 64bit value)
76 * from the "status" sysfs file. For binary compatibility, values
77 * must remain as is; removed states can be reused for different
78 * purposes.
79 */
80 #define QIB_STATUS_INITTED 0x1 /* basic initialization done */
81 /* Chip has been found and initted */
82 #define QIB_STATUS_CHIP_PRESENT 0x20
83 /* IB link is at ACTIVE, usable for data traffic */
84 #define QIB_STATUS_IB_READY 0x40
85 /* link is configured, LID, MTU, etc. have been set */
86 #define QIB_STATUS_IB_CONF 0x80
87 /* A Fatal hardware error has occurred. */
88 #define QIB_STATUS_HWERROR 0x200
89
90 /*
91 * The list of usermode accessible registers. Also see Reg_* later in file.
92 */
93 enum qib_ureg {
94 /* (RO) DMA RcvHdr to be used next. */
95 ur_rcvhdrtail = 0,
96 /* (RW) RcvHdr entry to be processed next by host. */
97 ur_rcvhdrhead = 1,
98 /* (RO) Index of next Eager index to use. */
99 ur_rcvegrindextail = 2,
100 /* (RW) Eager TID to be processed next */
101 ur_rcvegrindexhead = 3,
102 /* For internal use only; max register number. */
103 _QIB_UregMax
104 };
105
106 /* bit values for spi_runtime_flags */
107 #define QIB_RUNTIME_PCIE 0x0002
108 #define QIB_RUNTIME_FORCE_WC_ORDER 0x0004
109 #define QIB_RUNTIME_RCVHDR_COPY 0x0008
110 #define QIB_RUNTIME_MASTER 0x0010
111 #define QIB_RUNTIME_RCHK 0x0020
112 #define QIB_RUNTIME_NODMA_RTAIL 0x0080
113 #define QIB_RUNTIME_SPECIAL_TRIGGER 0x0100
114 #define QIB_RUNTIME_SDMA 0x0200
115 #define QIB_RUNTIME_FORCE_PIOAVAIL 0x0400
116 #define QIB_RUNTIME_PIO_REGSWAPPED 0x0800
117 #define QIB_RUNTIME_CTXT_MSB_IN_QP 0x1000
118 #define QIB_RUNTIME_CTXT_REDIRECT 0x2000
119 #define QIB_RUNTIME_HDRSUPP 0x4000
120
121 /*
122 * This structure is returned by qib_userinit() immediately after
123 * open to get implementation-specific info, and info specific to this
124 * instance.
125 *
126 * This struct must have explict pad fields where type sizes
127 * may result in different alignments between 32 and 64 bit
128 * programs, since the 64 bit * bit kernel requires the user code
129 * to have matching offsets
130 */
131 struct qib_base_info {
132 /* version of hardware, for feature checking. */
133 __u32 spi_hw_version;
134 /* version of software, for feature checking. */
135 __u32 spi_sw_version;
136 /* QLogic_IB context assigned, goes into sent packets */
137 __u16 spi_ctxt;
138 __u16 spi_subctxt;
139 /*
140 * IB MTU, packets IB data must be less than this.
141 * The MTU is in bytes, and will be a multiple of 4 bytes.
142 */
143 __u32 spi_mtu;
144 /*
145 * Size of a PIO buffer. Any given packet's total size must be less
146 * than this (in words). Included is the starting control word, so
147 * if 513 is returned, then total pkt size is 512 words or less.
148 */
149 __u32 spi_piosize;
150 /* size of the TID cache in qlogic_ib, in entries */
151 __u32 spi_tidcnt;
152 /* size of the TID Eager list in qlogic_ib, in entries */
153 __u32 spi_tidegrcnt;
154 /* size of a single receive header queue entry in words. */
155 __u32 spi_rcvhdrent_size;
156 /*
157 * Count of receive header queue entries allocated.
158 * This may be less than the spu_rcvhdrcnt passed in!.
159 */
160 __u32 spi_rcvhdr_cnt;
161
162 /* per-chip and other runtime features bitmap (QIB_RUNTIME_*) */
163 __u32 spi_runtime_flags;
164
165 /* address where hardware receive header queue is mapped */
166 __u64 spi_rcvhdr_base;
167
168 /* user program. */
169
170 /* base address of eager TID receive buffers used by hardware. */
171 __u64 spi_rcv_egrbufs;
172
173 /* Allocated by initialization code, not by protocol. */
174
175 /*
176 * Size of each TID buffer in host memory, starting at
177 * spi_rcv_egrbufs. The buffers are virtually contiguous.
178 */
179 __u32 spi_rcv_egrbufsize;
180 /*
181 * The special QP (queue pair) value that identifies an qlogic_ib
182 * protocol packet from standard IB packets. More, probably much
183 * more, to be added.
184 */
185 __u32 spi_qpair;
186
187 /*
188 * User register base for init code, not to be used directly by
189 * protocol or applications. Always points to chip registers,
190 * for normal or shared context.
191 */
192 __u64 spi_uregbase;
193 /*
194 * Maximum buffer size in bytes that can be used in a single TID
195 * entry (assuming the buffer is aligned to this boundary). This is
196 * the minimum of what the hardware and software support Guaranteed
197 * to be a power of 2.
198 */
199 __u32 spi_tid_maxsize;
200 /*
201 * alignment of each pio send buffer (byte count
202 * to add to spi_piobufbase to get to second buffer)
203 */
204 __u32 spi_pioalign;
205 /*
206 * The index of the first pio buffer available to this process;
207 * needed to do lookup in spi_pioavailaddr; not added to
208 * spi_piobufbase.
209 */
210 __u32 spi_pioindex;
211 /* number of buffers mapped for this process */
212 __u32 spi_piocnt;
213
214 /*
215 * Base address of writeonly pio buffers for this process.
216 * Each buffer has spi_piosize words, and is aligned on spi_pioalign
217 * boundaries. spi_piocnt buffers are mapped from this address
218 */
219 __u64 spi_piobufbase;
220
221 /*
222 * Base address of readonly memory copy of the pioavail registers.
223 * There are 2 bits for each buffer.
224 */
225 __u64 spi_pioavailaddr;
226
227 /*
228 * Address where driver updates a copy of the interface and driver
229 * status (QIB_STATUS_*) as a 64 bit value. It's followed by a
230 * link status qword (formerly combined with driver status), then a
231 * string indicating hardware error, if there was one.
232 */
233 __u64 spi_status;
234
235 /* number of chip ctxts available to user processes */
236 __u32 spi_nctxts;
237 __u16 spi_unit; /* unit number of chip we are using */
238 __u16 spi_port; /* IB port number we are using */
239 /* num bufs in each contiguous set */
240 __u32 spi_rcv_egrperchunk;
241 /* size in bytes of each contiguous set */
242 __u32 spi_rcv_egrchunksize;
243 /* total size of mmap to cover full rcvegrbuffers */
244 __u32 spi_rcv_egrbuftotlen;
245 __u32 spi_rhf_offset; /* dword offset in hdrqent for rcvhdr flags */
246 /* address of readonly memory copy of the rcvhdrq tail register. */
247 __u64 spi_rcvhdr_tailaddr;
248
249 /*
250 * shared memory pages for subctxts if ctxt is shared; these cover
251 * all the processes in the group sharing a single context.
252 * all have enough space for the num_subcontexts value on this job.
253 */
254 __u64 spi_subctxt_uregbase;
255 __u64 spi_subctxt_rcvegrbuf;
256 __u64 spi_subctxt_rcvhdr_base;
257
258 /* shared memory page for send buffer disarm status */
259 __u64 spi_sendbuf_status;
260 } __aligned(8);
261
262 /*
263 * This version number is given to the driver by the user code during
264 * initialization in the spu_userversion field of qib_user_info, so
265 * the driver can check for compatibility with user code.
266 *
267 * The major version changes when data structures
268 * change in an incompatible way. The driver must be the same or higher
269 * for initialization to succeed. In some cases, a higher version
270 * driver will not interoperate with older software, and initialization
271 * will return an error.
272 */
273 #define QIB_USER_SWMAJOR 1
274
275 /*
276 * Minor version differences are always compatible
277 * a within a major version, however if user software is larger
278 * than driver software, some new features and/or structure fields
279 * may not be implemented; the user code must deal with this if it
280 * cares, or it must abort after initialization reports the difference.
281 */
282 #define QIB_USER_SWMINOR 13
283
284 #define QIB_USER_SWVERSION ((QIB_USER_SWMAJOR << 16) | QIB_USER_SWMINOR)
285
286 #ifndef QIB_KERN_TYPE
287 #define QIB_KERN_TYPE 0
288 #endif
289
290 /*
291 * Similarly, this is the kernel version going back to the user. It's
292 * slightly different, in that we want to tell if the driver was built as
293 * part of a QLogic release, or from the driver from openfabrics.org,
294 * kernel.org, or a standard distribution, for support reasons.
295 * The high bit is 0 for non-QLogic and 1 for QLogic-built/supplied.
296 *
297 * It's returned by the driver to the user code during initialization in the
298 * spi_sw_version field of qib_base_info, so the user code can in turn
299 * check for compatibility with the kernel.
300 */
301 #define QIB_KERN_SWVERSION ((QIB_KERN_TYPE << 31) | QIB_USER_SWVERSION)
302
303 /*
304 * Define the driver version number. This is something that refers only
305 * to the driver itself, not the software interfaces it supports.
306 */
307 #define QIB_DRIVER_VERSION_BASE "1.11"
308
309 /* create the final driver version string */
310 #ifdef QIB_IDSTR
311 #define QIB_DRIVER_VERSION QIB_DRIVER_VERSION_BASE " " QIB_IDSTR
312 #else
313 #define QIB_DRIVER_VERSION QIB_DRIVER_VERSION_BASE
314 #endif
315
316 /*
317 * If the unit is specified via open, HCA choice is fixed. If port is
318 * specified, it's also fixed. Otherwise we try to spread contexts
319 * across ports and HCAs, using different algorithims. WITHIN is
320 * the old default, prior to this mechanism.
321 */
322 #define QIB_PORT_ALG_ACROSS 0 /* round robin contexts across HCAs, then
323 * ports; this is the default */
324 #define QIB_PORT_ALG_WITHIN 1 /* use all contexts on an HCA (round robin
325 * active ports within), then next HCA */
326 #define QIB_PORT_ALG_COUNT 2 /* number of algorithm choices */
327
328 /*
329 * This structure is passed to qib_userinit() to tell the driver where
330 * user code buffers are, sizes, etc. The offsets and sizes of the
331 * fields must remain unchanged, for binary compatibility. It can
332 * be extended, if userversion is changed so user code can tell, if needed
333 */
334 struct qib_user_info {
335 /*
336 * version of user software, to detect compatibility issues.
337 * Should be set to QIB_USER_SWVERSION.
338 */
339 __u32 spu_userversion;
340
341 __u32 _spu_unused2;
342
343 /* size of struct base_info to write to */
344 __u32 spu_base_info_size;
345
346 __u32 spu_port_alg; /* which QIB_PORT_ALG_*; unused user minor < 11 */
347
348 /*
349 * If two or more processes wish to share a context, each process
350 * must set the spu_subctxt_cnt and spu_subctxt_id to the same
351 * values. The only restriction on the spu_subctxt_id is that
352 * it be unique for a given node.
353 */
354 __u16 spu_subctxt_cnt;
355 __u16 spu_subctxt_id;
356
357 __u32 spu_port; /* IB port requested by user if > 0 */
358
359 /*
360 * address of struct base_info to write to
361 */
362 __u64 spu_base_info;
363
364 } __aligned(8);
365
366 /* User commands. */
367
368 /* 16 available, was: old set up userspace (for old user code) */
369 #define QIB_CMD_CTXT_INFO 17 /* find out what resources we got */
370 #define QIB_CMD_RECV_CTRL 18 /* control receipt of packets */
371 #define QIB_CMD_TID_UPDATE 19 /* update expected TID entries */
372 #define QIB_CMD_TID_FREE 20 /* free expected TID entries */
373 #define QIB_CMD_SET_PART_KEY 21 /* add partition key */
374 /* 22 available, was: return info on slave processes (for old user code) */
375 #define QIB_CMD_ASSIGN_CTXT 23 /* allocate HCA and ctxt */
376 #define QIB_CMD_USER_INIT 24 /* set up userspace */
377 #define QIB_CMD_UNUSED_1 25
378 #define QIB_CMD_UNUSED_2 26
379 #define QIB_CMD_PIOAVAILUPD 27 /* force an update of PIOAvail reg */
380 #define QIB_CMD_POLL_TYPE 28 /* set the kind of polling we want */
381 #define QIB_CMD_ARMLAUNCH_CTRL 29 /* armlaunch detection control */
382 /* 30 is unused */
383 #define QIB_CMD_SDMA_INFLIGHT 31 /* sdma inflight counter request */
384 #define QIB_CMD_SDMA_COMPLETE 32 /* sdma completion counter request */
385 /* 33 available, was a testing feature */
386 #define QIB_CMD_DISARM_BUFS 34 /* disarm send buffers w/ errors */
387 #define QIB_CMD_ACK_EVENT 35 /* ack & clear bits */
388 #define QIB_CMD_CPUS_LIST 36 /* list of cpus allocated, for pinned
389 * processes: qib_cpus_list */
390
391 /*
392 * QIB_CMD_ACK_EVENT obsoletes QIB_CMD_DISARM_BUFS, but we keep it for
393 * compatibility with libraries from previous release. The ACK_EVENT
394 * will take appropriate driver action (if any, just DISARM for now),
395 * then clear the bits passed in as part of the mask. These bits are
396 * in the first 64bit word at spi_sendbuf_status, and are passed to
397 * the driver in the event_mask union as well.
398 */
399 #define _QIB_EVENT_DISARM_BUFS_BIT 0
400 #define _QIB_EVENT_LINKDOWN_BIT 1
401 #define _QIB_EVENT_LID_CHANGE_BIT 2
402 #define _QIB_EVENT_LMC_CHANGE_BIT 3
403 #define _QIB_EVENT_SL2VL_CHANGE_BIT 4
404 #define _QIB_MAX_EVENT_BIT _QIB_EVENT_SL2VL_CHANGE_BIT
405
406 #define QIB_EVENT_DISARM_BUFS_BIT (1UL << _QIB_EVENT_DISARM_BUFS_BIT)
407 #define QIB_EVENT_LINKDOWN_BIT (1UL << _QIB_EVENT_LINKDOWN_BIT)
408 #define QIB_EVENT_LID_CHANGE_BIT (1UL << _QIB_EVENT_LID_CHANGE_BIT)
409 #define QIB_EVENT_LMC_CHANGE_BIT (1UL << _QIB_EVENT_LMC_CHANGE_BIT)
410 #define QIB_EVENT_SL2VL_CHANGE_BIT (1UL << _QIB_EVENT_SL2VL_CHANGE_BIT)
411
412
413 /*
414 * Poll types
415 */
416 #define QIB_POLL_TYPE_ANYRCV 0x0
417 #define QIB_POLL_TYPE_URGENT 0x1
418
419 struct qib_ctxt_info {
420 __u16 num_active; /* number of active units */
421 __u16 unit; /* unit (chip) assigned to caller */
422 __u16 port; /* IB port assigned to caller (1-based) */
423 __u16 ctxt; /* ctxt on unit assigned to caller */
424 __u16 subctxt; /* subctxt on unit assigned to caller */
425 __u16 num_ctxts; /* number of ctxts available on unit */
426 __u16 num_subctxts; /* number of subctxts opened on ctxt */
427 __u16 rec_cpu; /* cpu # for affinity (ffff if none) */
428 };
429
430 struct qib_tid_info {
431 __u32 tidcnt;
432 /* make structure same size in 32 and 64 bit */
433 __u32 tid__unused;
434 /* virtual address of first page in transfer */
435 __u64 tidvaddr;
436 /* pointer (same size 32/64 bit) to __u16 tid array */
437 __u64 tidlist;
438
439 /*
440 * pointer (same size 32/64 bit) to bitmap of TIDs used
441 * for this call; checked for being large enough at open
442 */
443 __u64 tidmap;
444 };
445
446 struct qib_cmd {
447 __u32 type; /* command type */
448 union {
449 struct qib_tid_info tid_info;
450 struct qib_user_info user_info;
451
452 /*
453 * address in userspace where we should put the sdma
454 * inflight counter
455 */
456 __u64 sdma_inflight;
457 /*
458 * address in userspace where we should put the sdma
459 * completion counter
460 */
461 __u64 sdma_complete;
462 /* address in userspace of struct qib_ctxt_info to
463 write result to */
464 __u64 ctxt_info;
465 /* enable/disable receipt of packets */
466 __u32 recv_ctrl;
467 /* enable/disable armlaunch errors (non-zero to enable) */
468 __u32 armlaunch_ctrl;
469 /* partition key to set */
470 __u16 part_key;
471 /* user address of __u32 bitmask of active slaves */
472 __u64 slave_mask_addr;
473 /* type of polling we want */
474 __u16 poll_type;
475 /* back pressure enable bit for one particular context */
476 __u8 ctxt_bp;
477 /* qib_user_event_ack(), IPATH_EVENT_* bits */
478 __u64 event_mask;
479 } cmd;
480 };
481
482 struct qib_iovec {
483 /* Pointer to data, but same size 32 and 64 bit */
484 __u64 iov_base;
485
486 /*
487 * Length of data; don't need 64 bits, but want
488 * qib_sendpkt to remain same size as before 32 bit changes, so...
489 */
490 __u64 iov_len;
491 };
492
493 /*
494 * Describes a single packet for send. Each packet can have one or more
495 * buffers, but the total length (exclusive of IB headers) must be less
496 * than the MTU, and if using the PIO method, entire packet length,
497 * including IB headers, must be less than the qib_piosize value (words).
498 * Use of this necessitates including sys/uio.h
499 */
500 struct __qib_sendpkt {
501 __u32 sps_flags; /* flags for packet (TBD) */
502 __u32 sps_cnt; /* number of entries to use in sps_iov */
503 /* array of iov's describing packet. TEMPORARY */
504 struct qib_iovec sps_iov[4];
505 };
506
507 /*
508 * Diagnostics can send a packet by "writing" the following
509 * structs to the diag data special file.
510 * This allows a custom
511 * pbc (+ static rate) qword, so that special modes and deliberate
512 * changes to CRCs can be used. The elements were also re-ordered
513 * for better alignment and to avoid padding issues.
514 */
515 #define _DIAG_XPKT_VERS 3
516 struct qib_diag_xpkt {
517 __u16 version;
518 __u16 unit;
519 __u16 port;
520 __u16 len;
521 __u64 data;
522 __u64 pbc_wd;
523 };
524
525 /*
526 * Data layout in I2C flash (for GUID, etc.)
527 * All fields are little-endian binary unless otherwise stated
528 */
529 #define QIB_FLASH_VERSION 2
530 struct qib_flash {
531 /* flash layout version (QIB_FLASH_VERSION) */
532 __u8 if_fversion;
533 /* checksum protecting if_length bytes */
534 __u8 if_csum;
535 /*
536 * valid length (in use, protected by if_csum), including
537 * if_fversion and if_csum themselves)
538 */
539 __u8 if_length;
540 /* the GUID, in network order */
541 __u8 if_guid[8];
542 /* number of GUIDs to use, starting from if_guid */
543 __u8 if_numguid;
544 /* the (last 10 characters of) board serial number, in ASCII */
545 char if_serial[12];
546 /* board mfg date (YYYYMMDD ASCII) */
547 char if_mfgdate[8];
548 /* last board rework/test date (YYYYMMDD ASCII) */
549 char if_testdate[8];
550 /* logging of error counts, TBD */
551 __u8 if_errcntp[4];
552 /* powered on hours, updated at driver unload */
553 __u8 if_powerhour[2];
554 /* ASCII free-form comment field */
555 char if_comment[32];
556 /* Backwards compatible prefix for longer QLogic Serial Numbers */
557 char if_sprefix[4];
558 /* 82 bytes used, min flash size is 128 bytes */
559 __u8 if_future[46];
560 };
561
562 /*
563 * These are the counters implemented in the chip, and are listed in order.
564 * The InterCaps naming is taken straight from the chip spec.
565 */
566 struct qlogic_ib_counters {
567 __u64 LBIntCnt;
568 __u64 LBFlowStallCnt;
569 __u64 TxSDmaDescCnt; /* was Reserved1 */
570 __u64 TxUnsupVLErrCnt;
571 __u64 TxDataPktCnt;
572 __u64 TxFlowPktCnt;
573 __u64 TxDwordCnt;
574 __u64 TxLenErrCnt;
575 __u64 TxMaxMinLenErrCnt;
576 __u64 TxUnderrunCnt;
577 __u64 TxFlowStallCnt;
578 __u64 TxDroppedPktCnt;
579 __u64 RxDroppedPktCnt;
580 __u64 RxDataPktCnt;
581 __u64 RxFlowPktCnt;
582 __u64 RxDwordCnt;
583 __u64 RxLenErrCnt;
584 __u64 RxMaxMinLenErrCnt;
585 __u64 RxICRCErrCnt;
586 __u64 RxVCRCErrCnt;
587 __u64 RxFlowCtrlErrCnt;
588 __u64 RxBadFormatCnt;
589 __u64 RxLinkProblemCnt;
590 __u64 RxEBPCnt;
591 __u64 RxLPCRCErrCnt;
592 __u64 RxBufOvflCnt;
593 __u64 RxTIDFullErrCnt;
594 __u64 RxTIDValidErrCnt;
595 __u64 RxPKeyMismatchCnt;
596 __u64 RxP0HdrEgrOvflCnt;
597 __u64 RxP1HdrEgrOvflCnt;
598 __u64 RxP2HdrEgrOvflCnt;
599 __u64 RxP3HdrEgrOvflCnt;
600 __u64 RxP4HdrEgrOvflCnt;
601 __u64 RxP5HdrEgrOvflCnt;
602 __u64 RxP6HdrEgrOvflCnt;
603 __u64 RxP7HdrEgrOvflCnt;
604 __u64 RxP8HdrEgrOvflCnt;
605 __u64 RxP9HdrEgrOvflCnt;
606 __u64 RxP10HdrEgrOvflCnt;
607 __u64 RxP11HdrEgrOvflCnt;
608 __u64 RxP12HdrEgrOvflCnt;
609 __u64 RxP13HdrEgrOvflCnt;
610 __u64 RxP14HdrEgrOvflCnt;
611 __u64 RxP15HdrEgrOvflCnt;
612 __u64 RxP16HdrEgrOvflCnt;
613 __u64 IBStatusChangeCnt;
614 __u64 IBLinkErrRecoveryCnt;
615 __u64 IBLinkDownedCnt;
616 __u64 IBSymbolErrCnt;
617 __u64 RxVL15DroppedPktCnt;
618 __u64 RxOtherLocalPhyErrCnt;
619 __u64 PcieRetryBufDiagQwordCnt;
620 __u64 ExcessBufferOvflCnt;
621 __u64 LocalLinkIntegrityErrCnt;
622 __u64 RxVlErrCnt;
623 __u64 RxDlidFltrCnt;
624 };
625
626 /*
627 * The next set of defines are for packet headers, and chip register
628 * and memory bits that are visible to and/or used by user-mode software.
629 */
630
631 /* RcvHdrFlags bits */
632 #define QLOGIC_IB_RHF_LENGTH_MASK 0x7FF
633 #define QLOGIC_IB_RHF_LENGTH_SHIFT 0
634 #define QLOGIC_IB_RHF_RCVTYPE_MASK 0x7
635 #define QLOGIC_IB_RHF_RCVTYPE_SHIFT 11
636 #define QLOGIC_IB_RHF_EGRINDEX_MASK 0xFFF
637 #define QLOGIC_IB_RHF_EGRINDEX_SHIFT 16
638 #define QLOGIC_IB_RHF_SEQ_MASK 0xF
639 #define QLOGIC_IB_RHF_SEQ_SHIFT 0
640 #define QLOGIC_IB_RHF_HDRQ_OFFSET_MASK 0x7FF
641 #define QLOGIC_IB_RHF_HDRQ_OFFSET_SHIFT 4
642 #define QLOGIC_IB_RHF_H_ICRCERR 0x80000000
643 #define QLOGIC_IB_RHF_H_VCRCERR 0x40000000
644 #define QLOGIC_IB_RHF_H_PARITYERR 0x20000000
645 #define QLOGIC_IB_RHF_H_LENERR 0x10000000
646 #define QLOGIC_IB_RHF_H_MTUERR 0x08000000
647 #define QLOGIC_IB_RHF_H_IHDRERR 0x04000000
648 #define QLOGIC_IB_RHF_H_TIDERR 0x02000000
649 #define QLOGIC_IB_RHF_H_MKERR 0x01000000
650 #define QLOGIC_IB_RHF_H_IBERR 0x00800000
651 #define QLOGIC_IB_RHF_H_ERR_MASK 0xFF800000
652 #define QLOGIC_IB_RHF_L_USE_EGR 0x80000000
653 #define QLOGIC_IB_RHF_L_SWA 0x00008000
654 #define QLOGIC_IB_RHF_L_SWB 0x00004000
655
656 /* qlogic_ib header fields */
657 #define QLOGIC_IB_I_VERS_MASK 0xF
658 #define QLOGIC_IB_I_VERS_SHIFT 28
659 #define QLOGIC_IB_I_CTXT_MASK 0xF
660 #define QLOGIC_IB_I_CTXT_SHIFT 24
661 #define QLOGIC_IB_I_TID_MASK 0x7FF
662 #define QLOGIC_IB_I_TID_SHIFT 13
663 #define QLOGIC_IB_I_OFFSET_MASK 0x1FFF
664 #define QLOGIC_IB_I_OFFSET_SHIFT 0
665
666 /* K_PktFlags bits */
667 #define QLOGIC_IB_KPF_INTR 0x1
668 #define QLOGIC_IB_KPF_SUBCTXT_MASK 0x3
669 #define QLOGIC_IB_KPF_SUBCTXT_SHIFT 1
670
671 #define QLOGIC_IB_MAX_SUBCTXT 4
672
673 /* SendPIO per-buffer control */
674 #define QLOGIC_IB_SP_TEST 0x40
675 #define QLOGIC_IB_SP_TESTEBP 0x20
676 #define QLOGIC_IB_SP_TRIGGER_SHIFT 15
677
678 /* SendPIOAvail bits */
679 #define QLOGIC_IB_SENDPIOAVAIL_BUSY_SHIFT 1
680 #define QLOGIC_IB_SENDPIOAVAIL_CHECK_SHIFT 0
681
682 /* qlogic_ib header format */
683 struct qib_header {
684 /*
685 * Version - 4 bits, Context - 4 bits, TID - 10 bits and Offset -
686 * 14 bits before ECO change ~28 Dec 03. After that, Vers 4,
687 * Context 4, TID 11, offset 13.
688 */
689 __le32 ver_ctxt_tid_offset;
690 __le16 chksum;
691 __le16 pkt_flags;
692 };
693
694 /*
695 * qlogic_ib user message header format.
696 * This structure contains the first 4 fields common to all protocols
697 * that employ qlogic_ib.
698 */
699 struct qib_message_header {
700 __be16 lrh[4];
701 __be32 bth[3];
702 /* fields below this point are in host byte order */
703 struct qib_header iph;
704 /* fields below are simplified, but should match PSM */
705 /* some are accessed by driver when packet spliting is needed */
706 __u8 sub_opcode;
707 __u8 flags;
708 __u16 commidx;
709 __u32 ack_seq_num;
710 __u8 flowid;
711 __u8 hdr_dlen;
712 __u16 mqhdr;
713 __u32 uwords[4];
714 };
715
716 /* sequence number bits for message */
717 union qib_seqnum {
718 struct {
719 __u32 seq:11;
720 __u32 gen:8;
721 __u32 flow:5;
722 };
723 struct {
724 __u32 pkt:16;
725 __u32 msg:8;
726 };
727 __u32 val;
728 };
729
730 /* qib receiving-dma tid-session-member */
731 struct qib_tid_session_member {
732 __u16 tid;
733 __u16 offset;
734 __u16 length;
735 };
736
737 /* IB - LRH header consts */
738 #define QIB_LRH_GRH 0x0003 /* 1. word of IB LRH - next header: GRH */
739 #define QIB_LRH_BTH 0x0002 /* 1. word of IB LRH - next header: BTH */
740
741 /* misc. */
742 #define SIZE_OF_CRC 1
743
744 #define QIB_DEFAULT_P_KEY 0xFFFF
745 #define QIB_PERMISSIVE_LID 0xFFFF
746 #define QIB_AETH_CREDIT_SHIFT 24
747 #define QIB_AETH_CREDIT_MASK 0x1F
748 #define QIB_AETH_CREDIT_INVAL 0x1F
749 #define QIB_PSN_MASK 0xFFFFFF
750 #define QIB_MSN_MASK 0xFFFFFF
751 #define QIB_QPN_MASK 0xFFFFFF
752 #define QIB_MULTICAST_LID_BASE 0xC000
753 #define QIB_EAGER_TID_ID QLOGIC_IB_I_TID_MASK
754 #define QIB_MULTICAST_QPN 0xFFFFFF
755
756 /* Receive Header Queue: receive type (from qlogic_ib) */
757 #define RCVHQ_RCV_TYPE_EXPECTED 0
758 #define RCVHQ_RCV_TYPE_EAGER 1
759 #define RCVHQ_RCV_TYPE_NON_KD 2
760 #define RCVHQ_RCV_TYPE_ERROR 3
761
762 #define QIB_HEADER_QUEUE_WORDS 9
763
764 /* functions for extracting fields from rcvhdrq entries for the driver.
765 */
qib_hdrget_err_flags(const __le32 * rbuf)766 static inline __u32 qib_hdrget_err_flags(const __le32 *rbuf)
767 {
768 return __le32_to_cpu(rbuf[1]) & QLOGIC_IB_RHF_H_ERR_MASK;
769 }
770
qib_hdrget_rcv_type(const __le32 * rbuf)771 static inline __u32 qib_hdrget_rcv_type(const __le32 *rbuf)
772 {
773 return (__le32_to_cpu(rbuf[0]) >> QLOGIC_IB_RHF_RCVTYPE_SHIFT) &
774 QLOGIC_IB_RHF_RCVTYPE_MASK;
775 }
776
qib_hdrget_length_in_bytes(const __le32 * rbuf)777 static inline __u32 qib_hdrget_length_in_bytes(const __le32 *rbuf)
778 {
779 return ((__le32_to_cpu(rbuf[0]) >> QLOGIC_IB_RHF_LENGTH_SHIFT) &
780 QLOGIC_IB_RHF_LENGTH_MASK) << 2;
781 }
782
qib_hdrget_index(const __le32 * rbuf)783 static inline __u32 qib_hdrget_index(const __le32 *rbuf)
784 {
785 return (__le32_to_cpu(rbuf[0]) >> QLOGIC_IB_RHF_EGRINDEX_SHIFT) &
786 QLOGIC_IB_RHF_EGRINDEX_MASK;
787 }
788
qib_hdrget_seq(const __le32 * rbuf)789 static inline __u32 qib_hdrget_seq(const __le32 *rbuf)
790 {
791 return (__le32_to_cpu(rbuf[1]) >> QLOGIC_IB_RHF_SEQ_SHIFT) &
792 QLOGIC_IB_RHF_SEQ_MASK;
793 }
794
qib_hdrget_offset(const __le32 * rbuf)795 static inline __u32 qib_hdrget_offset(const __le32 *rbuf)
796 {
797 return (__le32_to_cpu(rbuf[1]) >> QLOGIC_IB_RHF_HDRQ_OFFSET_SHIFT) &
798 QLOGIC_IB_RHF_HDRQ_OFFSET_MASK;
799 }
800
qib_hdrget_use_egr_buf(const __le32 * rbuf)801 static inline __u32 qib_hdrget_use_egr_buf(const __le32 *rbuf)
802 {
803 return __le32_to_cpu(rbuf[0]) & QLOGIC_IB_RHF_L_USE_EGR;
804 }
805
qib_hdrget_qib_ver(__le32 hdrword)806 static inline __u32 qib_hdrget_qib_ver(__le32 hdrword)
807 {
808 return (__le32_to_cpu(hdrword) >> QLOGIC_IB_I_VERS_SHIFT) &
809 QLOGIC_IB_I_VERS_MASK;
810 }
811
812 #endif /* _QIB_COMMON_H */
813