1 /*
2 * drivers/mtd/nand/sharpsl.c
3 *
4 * Copyright (C) 2004 Richard Purdie
5 * Copyright (C) 2008 Dmitry Baryshkov
6 *
7 * Based on Sharp's NAND driver sharp_sl.c
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 *
13 */
14
15 #include <linux/genhd.h>
16 #include <linux/slab.h>
17 #include <linux/module.h>
18 #include <linux/delay.h>
19 #include <linux/mtd/mtd.h>
20 #include <linux/mtd/nand.h>
21 #include <linux/mtd/nand_ecc.h>
22 #include <linux/mtd/partitions.h>
23 #include <linux/mtd/sharpsl.h>
24 #include <linux/interrupt.h>
25 #include <linux/platform_device.h>
26
27 #include <asm/io.h>
28 #include <mach/hardware.h>
29 #include <asm/mach-types.h>
30
31 struct sharpsl_nand {
32 struct mtd_info mtd;
33 struct nand_chip chip;
34
35 void __iomem *io;
36 };
37
38 #define mtd_to_sharpsl(_mtd) container_of(_mtd, struct sharpsl_nand, mtd)
39
40 /* register offset */
41 #define ECCLPLB 0x00 /* line parity 7 - 0 bit */
42 #define ECCLPUB 0x04 /* line parity 15 - 8 bit */
43 #define ECCCP 0x08 /* column parity 5 - 0 bit */
44 #define ECCCNTR 0x0C /* ECC byte counter */
45 #define ECCCLRR 0x10 /* cleare ECC */
46 #define FLASHIO 0x14 /* Flash I/O */
47 #define FLASHCTL 0x18 /* Flash Control */
48
49 /* Flash control bit */
50 #define FLRYBY (1 << 5)
51 #define FLCE1 (1 << 4)
52 #define FLWP (1 << 3)
53 #define FLALE (1 << 2)
54 #define FLCLE (1 << 1)
55 #define FLCE0 (1 << 0)
56
57 /*
58 * hardware specific access to control-lines
59 * ctrl:
60 * NAND_CNE: bit 0 -> ! bit 0 & 4
61 * NAND_CLE: bit 1 -> bit 1
62 * NAND_ALE: bit 2 -> bit 2
63 *
64 */
sharpsl_nand_hwcontrol(struct mtd_info * mtd,int cmd,unsigned int ctrl)65 static void sharpsl_nand_hwcontrol(struct mtd_info *mtd, int cmd,
66 unsigned int ctrl)
67 {
68 struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd);
69 struct nand_chip *chip = mtd->priv;
70
71 if (ctrl & NAND_CTRL_CHANGE) {
72 unsigned char bits = ctrl & 0x07;
73
74 bits |= (ctrl & 0x01) << 4;
75
76 bits ^= 0x11;
77
78 writeb((readb(sharpsl->io + FLASHCTL) & ~0x17) | bits, sharpsl->io + FLASHCTL);
79 }
80
81 if (cmd != NAND_CMD_NONE)
82 writeb(cmd, chip->IO_ADDR_W);
83 }
84
sharpsl_nand_dev_ready(struct mtd_info * mtd)85 static int sharpsl_nand_dev_ready(struct mtd_info *mtd)
86 {
87 struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd);
88 return !((readb(sharpsl->io + FLASHCTL) & FLRYBY) == 0);
89 }
90
sharpsl_nand_enable_hwecc(struct mtd_info * mtd,int mode)91 static void sharpsl_nand_enable_hwecc(struct mtd_info *mtd, int mode)
92 {
93 struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd);
94 writeb(0, sharpsl->io + ECCCLRR);
95 }
96
sharpsl_nand_calculate_ecc(struct mtd_info * mtd,const u_char * dat,u_char * ecc_code)97 static int sharpsl_nand_calculate_ecc(struct mtd_info *mtd, const u_char * dat, u_char * ecc_code)
98 {
99 struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd);
100 ecc_code[0] = ~readb(sharpsl->io + ECCLPUB);
101 ecc_code[1] = ~readb(sharpsl->io + ECCLPLB);
102 ecc_code[2] = (~readb(sharpsl->io + ECCCP) << 2) | 0x03;
103 return readb(sharpsl->io + ECCCNTR) != 0;
104 }
105
106 /*
107 * Main initialization routine
108 */
sharpsl_nand_probe(struct platform_device * pdev)109 static int sharpsl_nand_probe(struct platform_device *pdev)
110 {
111 struct nand_chip *this;
112 struct resource *r;
113 int err = 0;
114 struct sharpsl_nand *sharpsl;
115 struct sharpsl_nand_platform_data *data = dev_get_platdata(&pdev->dev);
116
117 if (!data) {
118 dev_err(&pdev->dev, "no platform data!\n");
119 return -EINVAL;
120 }
121
122 /* Allocate memory for MTD device structure and private data */
123 sharpsl = kzalloc(sizeof(struct sharpsl_nand), GFP_KERNEL);
124 if (!sharpsl)
125 return -ENOMEM;
126
127 r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
128 if (!r) {
129 dev_err(&pdev->dev, "no io memory resource defined!\n");
130 err = -ENODEV;
131 goto err_get_res;
132 }
133
134 /* map physical address */
135 sharpsl->io = ioremap(r->start, resource_size(r));
136 if (!sharpsl->io) {
137 dev_err(&pdev->dev, "ioremap to access Sharp SL NAND chip failed\n");
138 err = -EIO;
139 goto err_ioremap;
140 }
141
142 /* Get pointer to private data */
143 this = (struct nand_chip *)(&sharpsl->chip);
144
145 /* Link the private data with the MTD structure */
146 sharpsl->mtd.priv = this;
147 sharpsl->mtd.dev.parent = &pdev->dev;
148
149 platform_set_drvdata(pdev, sharpsl);
150
151 /*
152 * PXA initialize
153 */
154 writeb(readb(sharpsl->io + FLASHCTL) | FLWP, sharpsl->io + FLASHCTL);
155
156 /* Set address of NAND IO lines */
157 this->IO_ADDR_R = sharpsl->io + FLASHIO;
158 this->IO_ADDR_W = sharpsl->io + FLASHIO;
159 /* Set address of hardware control function */
160 this->cmd_ctrl = sharpsl_nand_hwcontrol;
161 this->dev_ready = sharpsl_nand_dev_ready;
162 /* 15 us command delay time */
163 this->chip_delay = 15;
164 /* set eccmode using hardware ECC */
165 this->ecc.mode = NAND_ECC_HW;
166 this->ecc.size = 256;
167 this->ecc.bytes = 3;
168 this->ecc.strength = 1;
169 this->badblock_pattern = data->badblock_pattern;
170 this->ecc.layout = data->ecc_layout;
171 this->ecc.hwctl = sharpsl_nand_enable_hwecc;
172 this->ecc.calculate = sharpsl_nand_calculate_ecc;
173 this->ecc.correct = nand_correct_data;
174
175 /* Scan to find existence of the device */
176 err = nand_scan(&sharpsl->mtd, 1);
177 if (err)
178 goto err_scan;
179
180 /* Register the partitions */
181 sharpsl->mtd.name = "sharpsl-nand";
182
183 err = mtd_device_parse_register(&sharpsl->mtd, NULL, NULL,
184 data->partitions, data->nr_partitions);
185 if (err)
186 goto err_add;
187
188 /* Return happy */
189 return 0;
190
191 err_add:
192 nand_cleanup(this);
193
194 err_scan:
195 iounmap(sharpsl->io);
196 err_ioremap:
197 err_get_res:
198 kfree(sharpsl);
199 return err;
200 }
201
202 /*
203 * Clean up routine
204 */
sharpsl_nand_remove(struct platform_device * pdev)205 static int sharpsl_nand_remove(struct platform_device *pdev)
206 {
207 struct sharpsl_nand *sharpsl = platform_get_drvdata(pdev);
208
209 /* Release resources, unregister device */
210 nand_release(&sharpsl->mtd);
211
212 iounmap(sharpsl->io);
213
214 /* Free the MTD device structure */
215 kfree(sharpsl);
216
217 return 0;
218 }
219
220 static struct platform_driver sharpsl_nand_driver = {
221 .driver = {
222 .name = "sharpsl-nand",
223 },
224 .probe = sharpsl_nand_probe,
225 .remove = sharpsl_nand_remove,
226 };
227
228 module_platform_driver(sharpsl_nand_driver);
229
230 MODULE_LICENSE("GPL");
231 MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
232 MODULE_DESCRIPTION("Device specific logic for NAND flash on Sharp SL-C7xx Series");
233