1 #ifndef __HD64570_H 2 #define __HD64570_H 3 4 /* SCA HD64570 register definitions - all addresses for mode 0 (8086 MPU) 5 and 1 (64180 MPU). For modes 2 and 3, XOR the address with 0x01. 6 7 Source: HD64570 SCA User's Manual 8 */ 9 10 11 12 /* SCA Control Registers */ 13 #define LPR 0x00 /* Low Power */ 14 15 /* Wait controller registers */ 16 #define PABR0 0x02 /* Physical Address Boundary 0 */ 17 #define PABR1 0x03 /* Physical Address Boundary 1 */ 18 #define WCRL 0x04 /* Wait Control L */ 19 #define WCRM 0x05 /* Wait Control M */ 20 #define WCRH 0x06 /* Wait Control H */ 21 22 #define PCR 0x08 /* DMA Priority Control */ 23 #define DMER 0x09 /* DMA Master Enable */ 24 25 26 /* Interrupt registers */ 27 #define ISR0 0x10 /* Interrupt Status 0 */ 28 #define ISR1 0x11 /* Interrupt Status 1 */ 29 #define ISR2 0x12 /* Interrupt Status 2 */ 30 31 #define IER0 0x14 /* Interrupt Enable 0 */ 32 #define IER1 0x15 /* Interrupt Enable 1 */ 33 #define IER2 0x16 /* Interrupt Enable 2 */ 34 35 #define ITCR 0x18 /* Interrupt Control */ 36 #define IVR 0x1A /* Interrupt Vector */ 37 #define IMVR 0x1C /* Interrupt Modified Vector */ 38 39 40 41 /* MSCI channel (port) 0 registers - offset 0x20 42 MSCI channel (port) 1 registers - offset 0x40 */ 43 44 #define MSCI0_OFFSET 0x20 45 #define MSCI1_OFFSET 0x40 46 47 #define TRBL 0x00 /* TX/RX buffer L */ 48 #define TRBH 0x01 /* TX/RX buffer H */ 49 #define ST0 0x02 /* Status 0 */ 50 #define ST1 0x03 /* Status 1 */ 51 #define ST2 0x04 /* Status 2 */ 52 #define ST3 0x05 /* Status 3 */ 53 #define FST 0x06 /* Frame Status */ 54 #define IE0 0x08 /* Interrupt Enable 0 */ 55 #define IE1 0x09 /* Interrupt Enable 1 */ 56 #define IE2 0x0A /* Interrupt Enable 2 */ 57 #define FIE 0x0B /* Frame Interrupt Enable */ 58 #define CMD 0x0C /* Command */ 59 #define MD0 0x0E /* Mode 0 */ 60 #define MD1 0x0F /* Mode 1 */ 61 #define MD2 0x10 /* Mode 2 */ 62 #define CTL 0x11 /* Control */ 63 #define SA0 0x12 /* Sync/Address 0 */ 64 #define SA1 0x13 /* Sync/Address 1 */ 65 #define IDL 0x14 /* Idle Pattern */ 66 #define TMC 0x15 /* Time Constant */ 67 #define RXS 0x16 /* RX Clock Source */ 68 #define TXS 0x17 /* TX Clock Source */ 69 #define TRC0 0x18 /* TX Ready Control 0 */ 70 #define TRC1 0x19 /* TX Ready Control 1 */ 71 #define RRC 0x1A /* RX Ready Control */ 72 #define CST0 0x1C /* Current Status 0 */ 73 #define CST1 0x1D /* Current Status 1 */ 74 75 76 /* Timer channel 0 (port 0 RX) registers - offset 0x60 77 Timer channel 1 (port 0 TX) registers - offset 0x68 78 Timer channel 2 (port 1 RX) registers - offset 0x70 79 Timer channel 3 (port 1 TX) registers - offset 0x78 80 */ 81 82 #define TIMER0RX_OFFSET 0x60 83 #define TIMER0TX_OFFSET 0x68 84 #define TIMER1RX_OFFSET 0x70 85 #define TIMER1TX_OFFSET 0x78 86 87 #define TCNTL 0x00 /* Up-counter L */ 88 #define TCNTH 0x01 /* Up-counter H */ 89 #define TCONRL 0x02 /* Constant L */ 90 #define TCONRH 0x03 /* Constant H */ 91 #define TCSR 0x04 /* Control/Status */ 92 #define TEPR 0x05 /* Expand Prescale */ 93 94 95 96 /* DMA channel 0 (port 0 RX) registers - offset 0x80 97 DMA channel 1 (port 0 TX) registers - offset 0xA0 98 DMA channel 2 (port 1 RX) registers - offset 0xC0 99 DMA channel 3 (port 1 TX) registers - offset 0xE0 100 */ 101 102 #define DMAC0RX_OFFSET 0x80 103 #define DMAC0TX_OFFSET 0xA0 104 #define DMAC1RX_OFFSET 0xC0 105 #define DMAC1TX_OFFSET 0xE0 106 107 #define BARL 0x00 /* Buffer Address L (chained block) */ 108 #define BARH 0x01 /* Buffer Address H (chained block) */ 109 #define BARB 0x02 /* Buffer Address B (chained block) */ 110 111 #define DARL 0x00 /* RX Destination Addr L (single block) */ 112 #define DARH 0x01 /* RX Destination Addr H (single block) */ 113 #define DARB 0x02 /* RX Destination Addr B (single block) */ 114 115 #define SARL 0x04 /* TX Source Address L (single block) */ 116 #define SARH 0x05 /* TX Source Address H (single block) */ 117 #define SARB 0x06 /* TX Source Address B (single block) */ 118 119 #define CPB 0x06 /* Chain Pointer Base (chained block) */ 120 121 #define CDAL 0x08 /* Current Descriptor Addr L (chained block) */ 122 #define CDAH 0x09 /* Current Descriptor Addr H (chained block) */ 123 #define EDAL 0x0A /* Error Descriptor Addr L (chained block) */ 124 #define EDAH 0x0B /* Error Descriptor Addr H (chained block) */ 125 #define BFLL 0x0C /* RX Receive Buffer Length L (chained block)*/ 126 #define BFLH 0x0D /* RX Receive Buffer Length H (chained block)*/ 127 #define BCRL 0x0E /* Byte Count L */ 128 #define BCRH 0x0F /* Byte Count H */ 129 #define DSR 0x10 /* DMA Status */ 130 #define DSR_RX(node) (DSR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET)) 131 #define DSR_TX(node) (DSR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET)) 132 #define DMR 0x11 /* DMA Mode */ 133 #define DMR_RX(node) (DMR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET)) 134 #define DMR_TX(node) (DMR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET)) 135 #define FCT 0x13 /* Frame End Interrupt Counter */ 136 #define FCT_RX(node) (FCT + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET)) 137 #define FCT_TX(node) (FCT + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET)) 138 #define DIR 0x14 /* DMA Interrupt Enable */ 139 #define DIR_RX(node) (DIR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET)) 140 #define DIR_TX(node) (DIR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET)) 141 #define DCR 0x15 /* DMA Command */ 142 #define DCR_RX(node) (DCR + (node ? DMAC1RX_OFFSET : DMAC0RX_OFFSET)) 143 #define DCR_TX(node) (DCR + (node ? DMAC1TX_OFFSET : DMAC0TX_OFFSET)) 144 145 146 147 148 /* Descriptor Structure */ 149 150 typedef struct { 151 u16 cp; /* Chain Pointer */ 152 u32 bp; /* Buffer Pointer (24 bits) */ 153 u16 len; /* Data Length */ 154 u8 stat; /* Status */ 155 u8 unused; /* pads to 2-byte boundary */ 156 }__packed pkt_desc; 157 158 159 /* Packet Descriptor Status bits */ 160 161 #define ST_TX_EOM 0x80 /* End of frame */ 162 #define ST_TX_EOT 0x01 /* End of transmission */ 163 164 #define ST_RX_EOM 0x80 /* End of frame */ 165 #define ST_RX_SHORT 0x40 /* Short frame */ 166 #define ST_RX_ABORT 0x20 /* Abort */ 167 #define ST_RX_RESBIT 0x10 /* Residual bit */ 168 #define ST_RX_OVERRUN 0x08 /* Overrun */ 169 #define ST_RX_CRC 0x04 /* CRC */ 170 171 #define ST_ERROR_MASK 0x7C 172 173 #define DIR_EOTE 0x80 /* Transfer completed */ 174 #define DIR_EOME 0x40 /* Frame Transfer Completed (chained-block) */ 175 #define DIR_BOFE 0x20 /* Buffer Overflow/Underflow (chained-block)*/ 176 #define DIR_COFE 0x10 /* Counter Overflow (chained-block) */ 177 178 179 #define DSR_EOT 0x80 /* Transfer completed */ 180 #define DSR_EOM 0x40 /* Frame Transfer Completed (chained-block) */ 181 #define DSR_BOF 0x20 /* Buffer Overflow/Underflow (chained-block)*/ 182 #define DSR_COF 0x10 /* Counter Overflow (chained-block) */ 183 #define DSR_DE 0x02 /* DMA Enable */ 184 #define DSR_DWE 0x01 /* DMA Write Disable */ 185 186 /* DMA Master Enable Register (DMER) bits */ 187 #define DMER_DME 0x80 /* DMA Master Enable */ 188 189 190 #define CMD_RESET 0x21 /* Reset Channel */ 191 #define CMD_TX_ENABLE 0x02 /* Start transmitter */ 192 #define CMD_RX_ENABLE 0x12 /* Start receiver */ 193 194 #define MD0_HDLC 0x80 /* Bit-sync HDLC mode */ 195 #define MD0_CRC_ENA 0x04 /* Enable CRC code calculation */ 196 #define MD0_CRC_CCITT 0x02 /* CCITT CRC instead of CRC-16 */ 197 #define MD0_CRC_PR1 0x01 /* Initial all-ones instead of all-zeros */ 198 199 #define MD0_CRC_NONE 0x00 200 #define MD0_CRC_16_0 0x04 201 #define MD0_CRC_16 0x05 202 #define MD0_CRC_ITU_0 0x06 203 #define MD0_CRC_ITU 0x07 204 205 #define MD2_NRZ 0x00 206 #define MD2_NRZI 0x20 207 #define MD2_MANCHESTER 0x80 208 #define MD2_FM_MARK 0xA0 209 #define MD2_FM_SPACE 0xC0 210 #define MD2_LOOPBACK 0x03 /* Local data Loopback */ 211 212 #define CTL_NORTS 0x01 213 #define CTL_IDLE 0x10 /* Transmit an idle pattern */ 214 #define CTL_UDRNC 0x20 /* Idle after CRC or FCS+flag transmission */ 215 216 #define ST0_TXRDY 0x02 /* TX ready */ 217 #define ST0_RXRDY 0x01 /* RX ready */ 218 219 #define ST1_UDRN 0x80 /* MSCI TX underrun */ 220 #define ST1_CDCD 0x04 /* DCD level changed */ 221 222 #define ST3_CTS 0x08 /* modem input - /CTS */ 223 #define ST3_DCD 0x04 /* modem input - /DCD */ 224 225 #define IE0_TXINT 0x80 /* TX INT MSCI interrupt enable */ 226 #define IE0_RXINTA 0x40 /* RX INT A MSCI interrupt enable */ 227 #define IE1_UDRN 0x80 /* TX underrun MSCI interrupt enable */ 228 #define IE1_CDCD 0x04 /* DCD level changed */ 229 230 #define DCR_ABORT 0x01 /* Software abort command */ 231 #define DCR_CLEAR_EOF 0x02 /* Clear EOF interrupt */ 232 233 /* TX and RX Clock Source - RXS and TXS */ 234 #define CLK_BRG_MASK 0x0F 235 #define CLK_LINE_RX 0x00 /* TX/RX clock line input */ 236 #define CLK_LINE_TX 0x00 /* TX/RX line input */ 237 #define CLK_BRG_RX 0x40 /* internal baud rate generator */ 238 #define CLK_BRG_TX 0x40 /* internal baud rate generator */ 239 #define CLK_RXCLK_TX 0x60 /* TX clock from RX clock */ 240 241 #endif 242