• Home
  • Line#
  • Scopes#
  • Navigate#
  • Raw
  • Download
1 /*
2  * Driver for PCA9685 16-channel 12-bit PWM LED controller
3  *
4  * Copyright (C) 2013 Steffen Trumtrar <s.trumtrar@pengutronix.de>
5  * Copyright (C) 2015 Clemens Gruber <clemens.gruber@pqgruber.com>
6  *
7  * based on the pwm-twl-led.c driver
8  *
9  * This program is free software; you can redistribute it and/or modify it
10  * under the terms of the GNU General Public License version 2 as published by
11  * the Free Software Foundation.
12  *
13  * This program is distributed in the hope that it will be useful, but WITHOUT
14  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
15  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
16  * more details.
17  *
18  * You should have received a copy of the GNU General Public License along with
19  * this program.  If not, see <http://www.gnu.org/licenses/>.
20  */
21 
22 #include <linux/acpi.h>
23 #include <linux/i2c.h>
24 #include <linux/module.h>
25 #include <linux/platform_device.h>
26 #include <linux/property.h>
27 #include <linux/pwm.h>
28 #include <linux/regmap.h>
29 #include <linux/slab.h>
30 #include <linux/delay.h>
31 
32 /*
33  * Because the PCA9685 has only one prescaler per chip, changing the period of
34  * one channel affects the period of all 16 PWM outputs!
35  * However, the ratio between each configured duty cycle and the chip-wide
36  * period remains constant, because the OFF time is set in proportion to the
37  * counter range.
38  */
39 
40 #define PCA9685_MODE1		0x00
41 #define PCA9685_MODE2		0x01
42 #define PCA9685_SUBADDR1	0x02
43 #define PCA9685_SUBADDR2	0x03
44 #define PCA9685_SUBADDR3	0x04
45 #define PCA9685_ALLCALLADDR	0x05
46 #define PCA9685_LEDX_ON_L	0x06
47 #define PCA9685_LEDX_ON_H	0x07
48 #define PCA9685_LEDX_OFF_L	0x08
49 #define PCA9685_LEDX_OFF_H	0x09
50 
51 #define PCA9685_ALL_LED_ON_L	0xFA
52 #define PCA9685_ALL_LED_ON_H	0xFB
53 #define PCA9685_ALL_LED_OFF_L	0xFC
54 #define PCA9685_ALL_LED_OFF_H	0xFD
55 #define PCA9685_PRESCALE	0xFE
56 
57 #define PCA9685_PRESCALE_MIN	0x03	/* => max. frequency of 1526 Hz */
58 #define PCA9685_PRESCALE_MAX	0xFF	/* => min. frequency of 24 Hz */
59 
60 #define PCA9685_COUNTER_RANGE	4096
61 #define PCA9685_DEFAULT_PERIOD	5000000	/* Default period_ns = 1/200 Hz */
62 #define PCA9685_OSC_CLOCK_MHZ	25	/* Internal oscillator with 25 MHz */
63 
64 #define PCA9685_NUMREGS		0xFF
65 #define PCA9685_MAXCHAN		0x10
66 
67 #define LED_FULL		(1 << 4)
68 #define MODE1_SLEEP		(1 << 4)
69 #define MODE2_INVRT		(1 << 4)
70 #define MODE2_OUTDRV		(1 << 2)
71 
72 #define LED_N_ON_H(N)	(PCA9685_LEDX_ON_H + (4 * (N)))
73 #define LED_N_ON_L(N)	(PCA9685_LEDX_ON_L + (4 * (N)))
74 #define LED_N_OFF_H(N)	(PCA9685_LEDX_OFF_H + (4 * (N)))
75 #define LED_N_OFF_L(N)	(PCA9685_LEDX_OFF_L + (4 * (N)))
76 
77 struct pca9685 {
78 	struct pwm_chip chip;
79 	struct regmap *regmap;
80 	int active_cnt;
81 	int duty_ns;
82 	int period_ns;
83 };
84 
to_pca(struct pwm_chip * chip)85 static inline struct pca9685 *to_pca(struct pwm_chip *chip)
86 {
87 	return container_of(chip, struct pca9685, chip);
88 }
89 
pca9685_pwm_config(struct pwm_chip * chip,struct pwm_device * pwm,int duty_ns,int period_ns)90 static int pca9685_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
91 			      int duty_ns, int period_ns)
92 {
93 	struct pca9685 *pca = to_pca(chip);
94 	unsigned long long duty;
95 	unsigned int reg;
96 	int prescale;
97 
98 	if (period_ns != pca->period_ns) {
99 		prescale = DIV_ROUND_CLOSEST(PCA9685_OSC_CLOCK_MHZ * period_ns,
100 					     PCA9685_COUNTER_RANGE * 1000) - 1;
101 
102 		if (prescale >= PCA9685_PRESCALE_MIN &&
103 			prescale <= PCA9685_PRESCALE_MAX) {
104 			/* Put chip into sleep mode */
105 			regmap_update_bits(pca->regmap, PCA9685_MODE1,
106 					   MODE1_SLEEP, MODE1_SLEEP);
107 
108 			/* Change the chip-wide output frequency */
109 			regmap_write(pca->regmap, PCA9685_PRESCALE, prescale);
110 
111 			/* Wake the chip up */
112 			regmap_update_bits(pca->regmap, PCA9685_MODE1,
113 					   MODE1_SLEEP, 0x0);
114 
115 			/* Wait 500us for the oscillator to be back up */
116 			udelay(500);
117 
118 			pca->period_ns = period_ns;
119 		} else {
120 			dev_err(chip->dev,
121 				"prescaler not set: period out of bounds!\n");
122 			return -EINVAL;
123 		}
124 	}
125 
126 	pca->duty_ns = duty_ns;
127 
128 	if (duty_ns < 1) {
129 		if (pwm->hwpwm >= PCA9685_MAXCHAN)
130 			reg = PCA9685_ALL_LED_OFF_H;
131 		else
132 			reg = LED_N_OFF_H(pwm->hwpwm);
133 
134 		regmap_write(pca->regmap, reg, LED_FULL);
135 
136 		return 0;
137 	}
138 
139 	if (duty_ns == period_ns) {
140 		/* Clear both OFF registers */
141 		if (pwm->hwpwm >= PCA9685_MAXCHAN)
142 			reg = PCA9685_ALL_LED_OFF_L;
143 		else
144 			reg = LED_N_OFF_L(pwm->hwpwm);
145 
146 		regmap_write(pca->regmap, reg, 0x0);
147 
148 		if (pwm->hwpwm >= PCA9685_MAXCHAN)
149 			reg = PCA9685_ALL_LED_OFF_H;
150 		else
151 			reg = LED_N_OFF_H(pwm->hwpwm);
152 
153 		regmap_write(pca->regmap, reg, 0x0);
154 
155 		/* Set the full ON bit */
156 		if (pwm->hwpwm >= PCA9685_MAXCHAN)
157 			reg = PCA9685_ALL_LED_ON_H;
158 		else
159 			reg = LED_N_ON_H(pwm->hwpwm);
160 
161 		regmap_write(pca->regmap, reg, LED_FULL);
162 
163 		return 0;
164 	}
165 
166 	duty = PCA9685_COUNTER_RANGE * (unsigned long long)duty_ns;
167 	duty = DIV_ROUND_UP_ULL(duty, period_ns);
168 
169 	if (pwm->hwpwm >= PCA9685_MAXCHAN)
170 		reg = PCA9685_ALL_LED_OFF_L;
171 	else
172 		reg = LED_N_OFF_L(pwm->hwpwm);
173 
174 	regmap_write(pca->regmap, reg, (int)duty & 0xff);
175 
176 	if (pwm->hwpwm >= PCA9685_MAXCHAN)
177 		reg = PCA9685_ALL_LED_OFF_H;
178 	else
179 		reg = LED_N_OFF_H(pwm->hwpwm);
180 
181 	regmap_write(pca->regmap, reg, ((int)duty >> 8) & 0xf);
182 
183 	/* Clear the full ON bit, otherwise the set OFF time has no effect */
184 	if (pwm->hwpwm >= PCA9685_MAXCHAN)
185 		reg = PCA9685_ALL_LED_ON_H;
186 	else
187 		reg = LED_N_ON_H(pwm->hwpwm);
188 
189 	regmap_write(pca->regmap, reg, 0);
190 
191 	return 0;
192 }
193 
pca9685_pwm_enable(struct pwm_chip * chip,struct pwm_device * pwm)194 static int pca9685_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
195 {
196 	struct pca9685 *pca = to_pca(chip);
197 	unsigned int reg;
198 
199 	/*
200 	 * The PWM subsystem does not support a pre-delay.
201 	 * So, set the ON-timeout to 0
202 	 */
203 	if (pwm->hwpwm >= PCA9685_MAXCHAN)
204 		reg = PCA9685_ALL_LED_ON_L;
205 	else
206 		reg = LED_N_ON_L(pwm->hwpwm);
207 
208 	regmap_write(pca->regmap, reg, 0);
209 
210 	if (pwm->hwpwm >= PCA9685_MAXCHAN)
211 		reg = PCA9685_ALL_LED_ON_H;
212 	else
213 		reg = LED_N_ON_H(pwm->hwpwm);
214 
215 	regmap_write(pca->regmap, reg, 0);
216 
217 	/*
218 	 * Clear the full-off bit.
219 	 * It has precedence over the others and must be off.
220 	 */
221 	if (pwm->hwpwm >= PCA9685_MAXCHAN)
222 		reg = PCA9685_ALL_LED_OFF_H;
223 	else
224 		reg = LED_N_OFF_H(pwm->hwpwm);
225 
226 	regmap_update_bits(pca->regmap, reg, LED_FULL, 0x0);
227 
228 	return 0;
229 }
230 
pca9685_pwm_disable(struct pwm_chip * chip,struct pwm_device * pwm)231 static void pca9685_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
232 {
233 	struct pca9685 *pca = to_pca(chip);
234 	unsigned int reg;
235 
236 	if (pwm->hwpwm >= PCA9685_MAXCHAN)
237 		reg = PCA9685_ALL_LED_OFF_H;
238 	else
239 		reg = LED_N_OFF_H(pwm->hwpwm);
240 
241 	regmap_write(pca->regmap, reg, LED_FULL);
242 
243 	/* Clear the LED_OFF counter. */
244 	if (pwm->hwpwm >= PCA9685_MAXCHAN)
245 		reg = PCA9685_ALL_LED_OFF_L;
246 	else
247 		reg = LED_N_OFF_L(pwm->hwpwm);
248 
249 	regmap_write(pca->regmap, reg, 0x0);
250 }
251 
pca9685_pwm_request(struct pwm_chip * chip,struct pwm_device * pwm)252 static int pca9685_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
253 {
254 	struct pca9685 *pca = to_pca(chip);
255 
256 	if (pca->active_cnt++ == 0)
257 		return regmap_update_bits(pca->regmap, PCA9685_MODE1,
258 					  MODE1_SLEEP, 0x0);
259 
260 	return 0;
261 }
262 
pca9685_pwm_free(struct pwm_chip * chip,struct pwm_device * pwm)263 static void pca9685_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
264 {
265 	struct pca9685 *pca = to_pca(chip);
266 
267 	if (--pca->active_cnt == 0)
268 		regmap_update_bits(pca->regmap, PCA9685_MODE1, MODE1_SLEEP,
269 				   MODE1_SLEEP);
270 }
271 
272 static const struct pwm_ops pca9685_pwm_ops = {
273 	.enable = pca9685_pwm_enable,
274 	.disable = pca9685_pwm_disable,
275 	.config = pca9685_pwm_config,
276 	.request = pca9685_pwm_request,
277 	.free = pca9685_pwm_free,
278 	.owner = THIS_MODULE,
279 };
280 
281 static const struct regmap_config pca9685_regmap_i2c_config = {
282 	.reg_bits = 8,
283 	.val_bits = 8,
284 	.max_register = PCA9685_NUMREGS,
285 	.cache_type = REGCACHE_NONE,
286 };
287 
pca9685_pwm_probe(struct i2c_client * client,const struct i2c_device_id * id)288 static int pca9685_pwm_probe(struct i2c_client *client,
289 				const struct i2c_device_id *id)
290 {
291 	struct pca9685 *pca;
292 	int ret;
293 	int mode2;
294 
295 	pca = devm_kzalloc(&client->dev, sizeof(*pca), GFP_KERNEL);
296 	if (!pca)
297 		return -ENOMEM;
298 
299 	pca->regmap = devm_regmap_init_i2c(client, &pca9685_regmap_i2c_config);
300 	if (IS_ERR(pca->regmap)) {
301 		ret = PTR_ERR(pca->regmap);
302 		dev_err(&client->dev, "Failed to initialize register map: %d\n",
303 			ret);
304 		return ret;
305 	}
306 	pca->duty_ns = 0;
307 	pca->period_ns = PCA9685_DEFAULT_PERIOD;
308 
309 	i2c_set_clientdata(client, pca);
310 
311 	regmap_read(pca->regmap, PCA9685_MODE2, &mode2);
312 
313 	if (device_property_read_bool(&client->dev, "invert"))
314 		mode2 |= MODE2_INVRT;
315 	else
316 		mode2 &= ~MODE2_INVRT;
317 
318 	if (device_property_read_bool(&client->dev, "open-drain"))
319 		mode2 &= ~MODE2_OUTDRV;
320 	else
321 		mode2 |= MODE2_OUTDRV;
322 
323 	regmap_write(pca->regmap, PCA9685_MODE2, mode2);
324 
325 	/* clear all "full off" bits */
326 	regmap_write(pca->regmap, PCA9685_ALL_LED_OFF_L, 0);
327 	regmap_write(pca->regmap, PCA9685_ALL_LED_OFF_H, 0);
328 
329 	pca->chip.ops = &pca9685_pwm_ops;
330 	/* add an extra channel for ALL_LED */
331 	pca->chip.npwm = PCA9685_MAXCHAN + 1;
332 
333 	pca->chip.dev = &client->dev;
334 	pca->chip.base = -1;
335 	pca->chip.can_sleep = true;
336 
337 	return pwmchip_add(&pca->chip);
338 }
339 
pca9685_pwm_remove(struct i2c_client * client)340 static int pca9685_pwm_remove(struct i2c_client *client)
341 {
342 	struct pca9685 *pca = i2c_get_clientdata(client);
343 
344 	regmap_update_bits(pca->regmap, PCA9685_MODE1, MODE1_SLEEP,
345 			   MODE1_SLEEP);
346 
347 	return pwmchip_remove(&pca->chip);
348 }
349 
350 static const struct i2c_device_id pca9685_id[] = {
351 	{ "pca9685", 0 },
352 	{ /* sentinel */ },
353 };
354 MODULE_DEVICE_TABLE(i2c, pca9685_id);
355 
356 #ifdef CONFIG_ACPI
357 static const struct acpi_device_id pca9685_acpi_ids[] = {
358 	{ "INT3492", 0 },
359 	{ /* sentinel */ },
360 };
361 MODULE_DEVICE_TABLE(acpi, pca9685_acpi_ids);
362 #endif
363 
364 #ifdef CONFIG_OF
365 static const struct of_device_id pca9685_dt_ids[] = {
366 	{ .compatible = "nxp,pca9685-pwm", },
367 	{ /* sentinel */ }
368 };
369 MODULE_DEVICE_TABLE(of, pca9685_dt_ids);
370 #endif
371 
372 static struct i2c_driver pca9685_i2c_driver = {
373 	.driver = {
374 		.name = "pca9685-pwm",
375 		.acpi_match_table = ACPI_PTR(pca9685_acpi_ids),
376 		.of_match_table = of_match_ptr(pca9685_dt_ids),
377 	},
378 	.probe = pca9685_pwm_probe,
379 	.remove = pca9685_pwm_remove,
380 	.id_table = pca9685_id,
381 };
382 
383 module_i2c_driver(pca9685_i2c_driver);
384 
385 MODULE_AUTHOR("Steffen Trumtrar <s.trumtrar@pengutronix.de>");
386 MODULE_DESCRIPTION("PWM driver for PCA9685");
387 MODULE_LICENSE("GPL");
388