1 /*
2 This is part of the rtl8192 driver
3 released under the GPL (See file COPYING for details).
4
5 This files contains programming code for the rtl8256
6 radio frontend.
7
8 *Many* thanks to Realtek Corp. for their great support!
9
10 */
11
12 #include "r8192U.h"
13 #include "r8192U_hw.h"
14 #include "r819xU_phyreg.h"
15 #include "r819xU_phy.h"
16 #include "r8190_rtl8256.h"
17
18 /*--------------------------------------------------------------------------
19 * Overview: set RF band width (20M or 40M)
20 * Input: struct net_device* dev
21 * WIRELESS_BANDWIDTH_E Bandwidth //20M or 40M
22 * Output: NONE
23 * Return: NONE
24 * Note: 8226 support both 20M and 40 MHz
25 *---------------------------------------------------------------------------*/
PHY_SetRF8256Bandwidth(struct net_device * dev,HT_CHANNEL_WIDTH Bandwidth)26 void PHY_SetRF8256Bandwidth(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth)
27 {
28 u8 eRFPath;
29 struct r8192_priv *priv = ieee80211_priv(dev);
30
31 /* for(eRFPath = RF90_PATH_A; eRFPath <pHalData->NumTotalRFPath;
32 * eRFPath++)
33 */
34 for (eRFPath = 0; eRFPath < RF90_PATH_MAX; eRFPath++) {
35 if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
36 continue;
37
38 switch (Bandwidth) {
39 case HT_CHANNEL_WIDTH_20:
40 if (priv->card_8192_version == VERSION_819xU_A
41 || priv->card_8192_version
42 == VERSION_819xU_B) { /* 8256 D-cut, E-cut, xiong: consider it later! */
43 rtl8192_phy_SetRFReg(dev,
44 (RF90_RADIO_PATH_E)eRFPath,
45 0x0b, bMask12Bits, 0x100); /* phy para:1ba */
46 rtl8192_phy_SetRFReg(dev,
47 (RF90_RADIO_PATH_E)eRFPath,
48 0x2c, bMask12Bits, 0x3d7);
49 rtl8192_phy_SetRFReg(dev,
50 (RF90_RADIO_PATH_E)eRFPath,
51 0x0e, bMask12Bits, 0x021);
52 rtl8192_phy_SetRFReg(dev,
53 (RF90_RADIO_PATH_E)eRFPath,
54 0x14, bMask12Bits, 0x5ab);
55 } else {
56 RT_TRACE(COMP_ERR, "PHY_SetRF8256Bandwidth(): unknown hardware version\n");
57 }
58 break;
59 case HT_CHANNEL_WIDTH_20_40:
60 if (priv->card_8192_version == VERSION_819xU_A || priv->card_8192_version == VERSION_819xU_B) { /* 8256 D-cut, E-cut, xiong: consider it later! */
61 rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x300); /* phy para:3ba */
62 rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3df);
63 rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x0a1);
64
65 if (priv->chan == 3 || priv->chan == 9)
66 /* I need to set priv->chan whenever current channel changes */
67 rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x59b);
68 else
69 rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x5ab);
70 } else {
71 RT_TRACE(COMP_ERR, "PHY_SetRF8256Bandwidth(): unknown hardware version\n");
72 }
73 break;
74 default:
75 RT_TRACE(COMP_ERR, "PHY_SetRF8256Bandwidth(): unknown Bandwidth: %#X\n", Bandwidth);
76 break;
77
78 }
79 }
80 }
81 /*--------------------------------------------------------------------------
82 * Overview: Interface to config 8256
83 * Input: struct net_device* dev
84 * Output: NONE
85 * Return: NONE
86 *---------------------------------------------------------------------------*/
PHY_RF8256_Config(struct net_device * dev)87 void PHY_RF8256_Config(struct net_device *dev)
88 {
89 struct r8192_priv *priv = ieee80211_priv(dev);
90 /* Initialize general global value
91 *
92 * TODO: Extend RF_PATH_C and RF_PATH_D in the future
93 */
94 priv->NumTotalRFPath = RTL819X_TOTAL_RF_PATH;
95 /* Config BB and RF */
96 phy_RF8256_Config_ParaFile(dev);
97 }
98 /*--------------------------------------------------------------------------
99 * Overview: Interface to config 8256
100 * Input: struct net_device* dev
101 * Output: NONE
102 * Return: NONE
103 *---------------------------------------------------------------------------*/
phy_RF8256_Config_ParaFile(struct net_device * dev)104 void phy_RF8256_Config_ParaFile(struct net_device *dev)
105 {
106 u32 u4RegValue = 0;
107 u8 eRFPath;
108 BB_REGISTER_DEFINITION_T *pPhyReg;
109 struct r8192_priv *priv = ieee80211_priv(dev);
110 u32 RegOffSetToBeCheck = 0x3;
111 u32 RegValueToBeCheck = 0x7f1;
112 u32 RF3_Final_Value = 0;
113 u8 ConstRetryTimes = 5, RetryTimes = 5;
114 u8 ret = 0;
115 /* Initialize RF */
116 for (eRFPath = (RF90_RADIO_PATH_E)RF90_PATH_A; eRFPath < priv->NumTotalRFPath; eRFPath++) {
117 if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
118 continue;
119
120 pPhyReg = &priv->PHYRegDef[eRFPath];
121
122 /* Joseph test for shorten RF config
123 * pHalData->RfReg0Value[eRFPath] = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, rGlobalCtrl, bMaskDWord);
124 * ----Store original RFENV control type
125 */
126 switch (eRFPath) {
127 case RF90_PATH_A:
128 case RF90_PATH_C:
129 u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV);
130 break;
131 case RF90_PATH_B:
132 case RF90_PATH_D:
133 u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16);
134 break;
135 }
136
137 /*----Set RF_ENV enable----*/
138 rtl8192_setBBreg(dev, pPhyReg->rfintfe, bRFSI_RFENV<<16, 0x1);
139
140 /*----Set RF_ENV output high----*/
141 rtl8192_setBBreg(dev, pPhyReg->rfintfo, bRFSI_RFENV, 0x1);
142
143 /* Set bit number of Address and Data for RF register */
144 rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0); /* Set 0 to 4 bits for Z-serial and set 1 to 6 bits for 8258 */
145 rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0); /* Set 0 to 12 bits for Z-serial and 8258, and set 1 to 14 bits for ??? */
146
147 rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E) eRFPath, 0x0, bMask12Bits, 0xbf);
148
149 /* Check RF block (for FPGA platform only)----
150 * TODO: this function should be removed on ASIC , Emily 2007.2.2
151 */
152 if (rtl8192_phy_checkBBAndRF(dev, HW90_BLOCK_RF, (RF90_RADIO_PATH_E)eRFPath)) {
153 RT_TRACE(COMP_ERR, "PHY_RF8256_Config():Check Radio[%d] Fail!!\n", eRFPath);
154 goto phy_RF8256_Config_ParaFile_Fail;
155 }
156
157 RetryTimes = ConstRetryTimes;
158 RF3_Final_Value = 0;
159 /*----Initialize RF fom connfiguration file----*/
160 switch (eRFPath) {
161 case RF90_PATH_A:
162 while (RF3_Final_Value != RegValueToBeCheck && RetryTimes != 0) {
163 ret = rtl8192_phy_ConfigRFWithHeaderFile(dev, (RF90_RADIO_PATH_E)eRFPath);
164 RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
165 RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
166 RetryTimes--;
167 }
168 break;
169 case RF90_PATH_B:
170 while (RF3_Final_Value != RegValueToBeCheck && RetryTimes != 0) {
171 ret = rtl8192_phy_ConfigRFWithHeaderFile(dev, (RF90_RADIO_PATH_E)eRFPath);
172 RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
173 RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
174 RetryTimes--;
175 }
176 break;
177 case RF90_PATH_C:
178 while (RF3_Final_Value != RegValueToBeCheck && RetryTimes != 0) {
179 ret = rtl8192_phy_ConfigRFWithHeaderFile(dev, (RF90_RADIO_PATH_E)eRFPath);
180 RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
181 RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
182 RetryTimes--;
183 }
184 break;
185 case RF90_PATH_D:
186 while (RF3_Final_Value != RegValueToBeCheck && RetryTimes != 0) {
187 ret = rtl8192_phy_ConfigRFWithHeaderFile(dev, (RF90_RADIO_PATH_E)eRFPath);
188 RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
189 RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
190 RetryTimes--;
191 }
192 break;
193 }
194
195 /*----Restore RFENV control type----*/;
196 switch (eRFPath) {
197 case RF90_PATH_A:
198 case RF90_PATH_C:
199 rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV, u4RegValue);
200 break;
201 case RF90_PATH_B:
202 case RF90_PATH_D:
203 rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16, u4RegValue);
204 break;
205 }
206
207 if (ret) {
208 RT_TRACE(COMP_ERR, "phy_RF8256_Config_ParaFile():Radio[%d] Fail!!", eRFPath);
209 goto phy_RF8256_Config_ParaFile_Fail;
210 }
211
212 }
213
214 RT_TRACE(COMP_PHY, "PHY Initialization Success\n");
215 return;
216
217 phy_RF8256_Config_ParaFile_Fail:
218 RT_TRACE(COMP_ERR, "PHY Initialization failed\n");
219 }
220
221
PHY_SetRF8256CCKTxPower(struct net_device * dev,u8 powerlevel)222 void PHY_SetRF8256CCKTxPower(struct net_device *dev, u8 powerlevel)
223 {
224 u32 TxAGC = 0;
225 struct r8192_priv *priv = ieee80211_priv(dev);
226 TxAGC = powerlevel;
227
228 if (priv->bDynamicTxLowPower) {
229 if (priv->CustomerID == RT_CID_819x_Netcore)
230 TxAGC = 0x22;
231 else
232 TxAGC += priv->CckPwEnl;
233 }
234
235 if (TxAGC > 0x24)
236 TxAGC = 0x24;
237 rtl8192_setBBreg(dev, rTxAGC_CCK_Mcs32, bTxAGCRateCCK, TxAGC);
238 }
239
240
PHY_SetRF8256OFDMTxPower(struct net_device * dev,u8 powerlevel)241 void PHY_SetRF8256OFDMTxPower(struct net_device *dev, u8 powerlevel)
242 {
243 struct r8192_priv *priv = ieee80211_priv(dev);
244 /* Joseph TxPower for 8192 testing */
245 u32 writeVal, powerBase0, powerBase1, writeVal_tmp;
246 u8 index = 0;
247 u16 RegOffset[6] = {0xe00, 0xe04, 0xe10, 0xe14, 0xe18, 0xe1c};
248 u8 byte0, byte1, byte2, byte3;
249
250 powerBase0 = powerlevel + priv->TxPowerDiff; /* OFDM rates */
251 powerBase0 = (powerBase0<<24) | (powerBase0<<16) | (powerBase0<<8) | powerBase0;
252 powerBase1 = powerlevel; /* MCS rates */
253 powerBase1 = (powerBase1<<24) | (powerBase1<<16) | (powerBase1<<8) | powerBase1;
254
255 for (index = 0; index < 6; index++) {
256 writeVal = priv->MCSTxPowerLevelOriginalOffset[index] + ((index < 2)?powerBase0:powerBase1);
257 byte0 = (u8)(writeVal & 0x7f);
258 byte1 = (u8)((writeVal & 0x7f00)>>8);
259 byte2 = (u8)((writeVal & 0x7f0000)>>16);
260 byte3 = (u8)((writeVal & 0x7f000000)>>24);
261
262 if (byte0 > 0x24)
263 /* Max power index = 0x24 */
264 byte0 = 0x24;
265 if (byte1 > 0x24)
266 byte1 = 0x24;
267 if (byte2 > 0x24)
268 byte2 = 0x24;
269 if (byte3 > 0x24)
270 byte3 = 0x24;
271
272 /* for tx power track */
273 if (index == 3) {
274 writeVal_tmp = (byte3<<24) | (byte2<<16) | (byte1<<8) | byte0;
275 priv->Pwr_Track = writeVal_tmp;
276 }
277
278 if (priv->bDynamicTxHighPower) {
279 /*Add by Jacken 2008/03/06
280 *Emily, 20080613. Set low tx power for both MCS and legacy OFDM
281 */
282 writeVal = 0x03030303;
283 } else {
284 writeVal = (byte3<<24) | (byte2<<16) | (byte1<<8) | byte0;
285 }
286 rtl8192_setBBreg(dev, RegOffset[index], 0x7f7f7f7f, writeVal);
287 }
288 return;
289
290 }
291