1dm-raid 2======= 3 4The device-mapper RAID (dm-raid) target provides a bridge from DM to MD. 5It allows the MD RAID drivers to be accessed using a device-mapper 6interface. 7 8 9Mapping Table Interface 10----------------------- 11The target is named "raid" and it accepts the following parameters: 12 13 <raid_type> <#raid_params> <raid_params> \ 14 <#raid_devs> <metadata_dev0> <dev0> [.. <metadata_devN> <devN>] 15 16<raid_type>: 17 raid0 RAID0 striping (no resilience) 18 raid1 RAID1 mirroring 19 raid4 RAID4 with dedicated last parity disk 20 raid5_n RAID5 with dedicated last parity disk suporting takeover 21 Same as raid4 22 -Transitory layout 23 raid5_la RAID5 left asymmetric 24 - rotating parity 0 with data continuation 25 raid5_ra RAID5 right asymmetric 26 - rotating parity N with data continuation 27 raid5_ls RAID5 left symmetric 28 - rotating parity 0 with data restart 29 raid5_rs RAID5 right symmetric 30 - rotating parity N with data restart 31 raid6_zr RAID6 zero restart 32 - rotating parity zero (left-to-right) with data restart 33 raid6_nr RAID6 N restart 34 - rotating parity N (right-to-left) with data restart 35 raid6_nc RAID6 N continue 36 - rotating parity N (right-to-left) with data continuation 37 raid6_n_6 RAID6 with dedicate parity disks 38 - parity and Q-syndrome on the last 2 disks; 39 laylout for takeover from/to raid4/raid5_n 40 raid6_la_6 Same as "raid_la" plus dedicated last Q-syndrome disk 41 - layout for takeover from raid5_la from/to raid6 42 raid6_ra_6 Same as "raid5_ra" dedicated last Q-syndrome disk 43 - layout for takeover from raid5_ra from/to raid6 44 raid6_ls_6 Same as "raid5_ls" dedicated last Q-syndrome disk 45 - layout for takeover from raid5_ls from/to raid6 46 raid6_rs_6 Same as "raid5_rs" dedicated last Q-syndrome disk 47 - layout for takeover from raid5_rs from/to raid6 48 raid10 Various RAID10 inspired algorithms chosen by additional params 49 (see raid10_format and raid10_copies below) 50 - RAID10: Striped Mirrors (aka 'Striping on top of mirrors') 51 - RAID1E: Integrated Adjacent Stripe Mirroring 52 - RAID1E: Integrated Offset Stripe Mirroring 53 - and other similar RAID10 variants 54 55 Reference: Chapter 4 of 56 http://www.snia.org/sites/default/files/SNIA_DDF_Technical_Position_v2.0.pdf 57 58<#raid_params>: The number of parameters that follow. 59 60<raid_params> consists of 61 Mandatory parameters: 62 <chunk_size>: Chunk size in sectors. This parameter is often known as 63 "stripe size". It is the only mandatory parameter and 64 is placed first. 65 66 followed by optional parameters (in any order): 67 [sync|nosync] Force or prevent RAID initialization. 68 69 [rebuild <idx>] Rebuild drive number 'idx' (first drive is 0). 70 71 [daemon_sleep <ms>] 72 Interval between runs of the bitmap daemon that 73 clear bits. A longer interval means less bitmap I/O but 74 resyncing after a failure is likely to take longer. 75 76 [min_recovery_rate <kB/sec/disk>] Throttle RAID initialization 77 [max_recovery_rate <kB/sec/disk>] Throttle RAID initialization 78 [write_mostly <idx>] Mark drive index 'idx' write-mostly. 79 [max_write_behind <sectors>] See '--write-behind=' (man mdadm) 80 [stripe_cache <sectors>] Stripe cache size (RAID 4/5/6 only) 81 [region_size <sectors>] 82 The region_size multiplied by the number of regions is the 83 logical size of the array. The bitmap records the device 84 synchronisation state for each region. 85 86 [raid10_copies <# copies>] 87 [raid10_format <near|far|offset>] 88 These two options are used to alter the default layout of 89 a RAID10 configuration. The number of copies is can be 90 specified, but the default is 2. There are also three 91 variations to how the copies are laid down - the default 92 is "near". Near copies are what most people think of with 93 respect to mirroring. If these options are left unspecified, 94 or 'raid10_copies 2' and/or 'raid10_format near' are given, 95 then the layouts for 2, 3 and 4 devices are: 96 2 drives 3 drives 4 drives 97 -------- ---------- -------------- 98 A1 A1 A1 A1 A2 A1 A1 A2 A2 99 A2 A2 A2 A3 A3 A3 A3 A4 A4 100 A3 A3 A4 A4 A5 A5 A5 A6 A6 101 A4 A4 A5 A6 A6 A7 A7 A8 A8 102 .. .. .. .. .. .. .. .. .. 103 The 2-device layout is equivalent 2-way RAID1. The 4-device 104 layout is what a traditional RAID10 would look like. The 105 3-device layout is what might be called a 'RAID1E - Integrated 106 Adjacent Stripe Mirroring'. 107 108 If 'raid10_copies 2' and 'raid10_format far', then the layouts 109 for 2, 3 and 4 devices are: 110 2 drives 3 drives 4 drives 111 -------- -------------- -------------------- 112 A1 A2 A1 A2 A3 A1 A2 A3 A4 113 A3 A4 A4 A5 A6 A5 A6 A7 A8 114 A5 A6 A7 A8 A9 A9 A10 A11 A12 115 .. .. .. .. .. .. .. .. .. 116 A2 A1 A3 A1 A2 A2 A1 A4 A3 117 A4 A3 A6 A4 A5 A6 A5 A8 A7 118 A6 A5 A9 A7 A8 A10 A9 A12 A11 119 .. .. .. .. .. .. .. .. .. 120 121 If 'raid10_copies 2' and 'raid10_format offset', then the 122 layouts for 2, 3 and 4 devices are: 123 2 drives 3 drives 4 drives 124 -------- ------------ ----------------- 125 A1 A2 A1 A2 A3 A1 A2 A3 A4 126 A2 A1 A3 A1 A2 A2 A1 A4 A3 127 A3 A4 A4 A5 A6 A5 A6 A7 A8 128 A4 A3 A6 A4 A5 A6 A5 A8 A7 129 A5 A6 A7 A8 A9 A9 A10 A11 A12 130 A6 A5 A9 A7 A8 A10 A9 A12 A11 131 .. .. .. .. .. .. .. .. .. 132 Here we see layouts closely akin to 'RAID1E - Integrated 133 Offset Stripe Mirroring'. 134 135 [delta_disks <N>] 136 The delta_disks option value (-251 < N < +251) triggers 137 device removal (negative value) or device addition (positive 138 value) to any reshape supporting raid levels 4/5/6 and 10. 139 RAID levels 4/5/6 allow for addition of devices (metadata 140 and data device tupel), raid10_near and raid10_offset only 141 allow for device addtion. raid10_far does not support any 142 reshaping at all. 143 A minimum of devices have to be kept to enforce resilience, 144 which is 3 devices for raid4/5 and 4 devices for raid6. 145 146 [data_offset <sectors>] 147 This option value defines the offset into each data device 148 where the data starts. This is used to provide out-of-place 149 reshaping space to avoid writing over data whilst 150 changing the layout of stripes, hence an interruption/crash 151 may happen at any time without the risk of losing data. 152 E.g. when adding devices to an existing raid set during 153 forward reshaping, the out-of-place space will be allocated 154 at the beginning of each raid device. The kernel raid4/5/6/10 155 MD personalities supporting such device addition will read the data from 156 the existing first stripes (those with smaller number of stripes) 157 starting at data_offset to fill up a new stripe with the larger 158 number of stripes, calculate the redundancy blocks (CRC/Q-syndrome) 159 and write that new stripe to offset 0. Same will be applied to all 160 N-1 other new stripes. This out-of-place scheme is used to change 161 the RAID type (i.e. the allocation algorithm) as well, e.g. 162 changing from raid5_ls to raid5_n. 163 164<#raid_devs>: The number of devices composing the array. 165 Each device consists of two entries. The first is the device 166 containing the metadata (if any); the second is the one containing the 167 data. A Maximum of 64 metadata/data device entries are supported 168 up to target version 1.8.0. 169 1.9.0 supports up to 253 which is enforced by the used MD kernel runtime. 170 171 If a drive has failed or is missing at creation time, a '-' can be 172 given for both the metadata and data drives for a given position. 173 174 175Example Tables 176-------------- 177# RAID4 - 4 data drives, 1 parity (no metadata devices) 178# No metadata devices specified to hold superblock/bitmap info 179# Chunk size of 1MiB 180# (Lines separated for easy reading) 181 1820 1960893648 raid \ 183 raid4 1 2048 \ 184 5 - 8:17 - 8:33 - 8:49 - 8:65 - 8:81 185 186# RAID4 - 4 data drives, 1 parity (with metadata devices) 187# Chunk size of 1MiB, force RAID initialization, 188# min recovery rate at 20 kiB/sec/disk 189 1900 1960893648 raid \ 191 raid4 4 2048 sync min_recovery_rate 20 \ 192 5 8:17 8:18 8:33 8:34 8:49 8:50 8:65 8:66 8:81 8:82 193 194 195Status Output 196------------- 197'dmsetup table' displays the table used to construct the mapping. 198The optional parameters are always printed in the order listed 199above with "sync" or "nosync" always output ahead of the other 200arguments, regardless of the order used when originally loading the table. 201Arguments that can be repeated are ordered by value. 202 203 204'dmsetup status' yields information on the state and health of the array. 205The output is as follows (normally a single line, but expanded here for 206clarity): 2071: <s> <l> raid \ 2082: <raid_type> <#devices> <health_chars> \ 2093: <sync_ratio> <sync_action> <mismatch_cnt> 210 211Line 1 is the standard output produced by device-mapper. 212Line 2 & 3 are produced by the raid target and are best explained by example: 213 0 1960893648 raid raid4 5 AAAAA 2/490221568 init 0 214Here we can see the RAID type is raid4, there are 5 devices - all of 215which are 'A'live, and the array is 2/490221568 complete with its initial 216recovery. Here is a fuller description of the individual fields: 217 <raid_type> Same as the <raid_type> used to create the array. 218 <health_chars> One char for each device, indicating: 'A' = alive and 219 in-sync, 'a' = alive but not in-sync, 'D' = dead/failed. 220 <sync_ratio> The ratio indicating how much of the array has undergone 221 the process described by 'sync_action'. If the 222 'sync_action' is "check" or "repair", then the process 223 of "resync" or "recover" can be considered complete. 224 <sync_action> One of the following possible states: 225 idle - No synchronization action is being performed. 226 frozen - The current action has been halted. 227 resync - Array is undergoing its initial synchronization 228 or is resynchronizing after an unclean shutdown 229 (possibly aided by a bitmap). 230 recover - A device in the array is being rebuilt or 231 replaced. 232 check - A user-initiated full check of the array is 233 being performed. All blocks are read and 234 checked for consistency. The number of 235 discrepancies found are recorded in 236 <mismatch_cnt>. No changes are made to the 237 array by this action. 238 repair - The same as "check", but discrepancies are 239 corrected. 240 reshape - The array is undergoing a reshape. 241 <mismatch_cnt> The number of discrepancies found between mirror copies 242 in RAID1/10 or wrong parity values found in RAID4/5/6. 243 This value is valid only after a "check" of the array 244 is performed. A healthy array has a 'mismatch_cnt' of 0. 245 246Message Interface 247----------------- 248The dm-raid target will accept certain actions through the 'message' interface. 249('man dmsetup' for more information on the message interface.) These actions 250include: 251 "idle" - Halt the current sync action. 252 "frozen" - Freeze the current sync action. 253 "resync" - Initiate/continue a resync. 254 "recover"- Initiate/continue a recover process. 255 "check" - Initiate a check (i.e. a "scrub") of the array. 256 "repair" - Initiate a repair of the array. 257 258 259Discard Support 260--------------- 261The implementation of discard support among hardware vendors varies. 262When a block is discarded, some storage devices will return zeroes when 263the block is read. These devices set the 'discard_zeroes_data' 264attribute. Other devices will return random data. Confusingly, some 265devices that advertise 'discard_zeroes_data' will not reliably return 266zeroes when discarded blocks are read! Since RAID 4/5/6 uses blocks 267from a number of devices to calculate parity blocks and (for performance 268reasons) relies on 'discard_zeroes_data' being reliable, it is important 269that the devices be consistent. Blocks may be discarded in the middle 270of a RAID 4/5/6 stripe and if subsequent read results are not 271consistent, the parity blocks may be calculated differently at any time; 272making the parity blocks useless for redundancy. It is important to 273understand how your hardware behaves with discards if you are going to 274enable discards with RAID 4/5/6. 275 276Since the behavior of storage devices is unreliable in this respect, 277even when reporting 'discard_zeroes_data', by default RAID 4/5/6 278discard support is disabled -- this ensures data integrity at the 279expense of losing some performance. 280 281Storage devices that properly support 'discard_zeroes_data' are 282increasingly whitelisted in the kernel and can thus be trusted. 283 284For trusted devices, the following dm-raid module parameter can be set 285to safely enable discard support for RAID 4/5/6: 286 'devices_handle_discards_safely' 287 288 289Version History 290--------------- 2911.0.0 Initial version. Support for RAID 4/5/6 2921.1.0 Added support for RAID 1 2931.2.0 Handle creation of arrays that contain failed devices. 2941.3.0 Added support for RAID 10 2951.3.1 Allow device replacement/rebuild for RAID 10 2961.3.2 Fix/improve redundancy checking for RAID10 2971.4.0 Non-functional change. Removes arg from mapping function. 2981.4.1 RAID10 fix redundancy validation checks (commit 55ebbb5). 2991.4.2 Add RAID10 "far" and "offset" algorithm support. 3001.5.0 Add message interface to allow manipulation of the sync_action. 301 New status (STATUSTYPE_INFO) fields: sync_action and mismatch_cnt. 3021.5.1 Add ability to restore transiently failed devices on resume. 3031.5.2 'mismatch_cnt' is zero unless [last_]sync_action is "check". 3041.6.0 Add discard support (and devices_handle_discard_safely module param). 3051.7.0 Add support for MD RAID0 mappings. 3061.8.0 Explictely check for compatible flags in the superblock metadata 307 and reject to start the raid set if any are set by a newer 308 target version, thus avoiding data corruption on a raid set 309 with a reshape in progress. 3101.9.0 Add support for RAID level takeover/reshape/region size 311 and set size reduction. 3121.9.1 Fix activation of existing RAID 4/10 mapped devices 313