1/* 2 * Copyright 2013 Freescale Semiconductor, Inc. 3 * 4 * This file is dual-licensed: you can use it either under the terms 5 * of the GPL or the X11 license, at your option. Note that this dual 6 * licensing only applies to this file, and not this project as a 7 * whole. 8 * 9 * a) This file is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License 11 * version 2 as published by the Free Software Foundation. 12 * 13 * This file is distributed in the hope that it will be useful 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * Or, alternatively 19 * 20 * b) Permission is hereby granted, free of charge, to any person 21 * obtaining a copy of this software and associated documentation 22 * files (the "Software"), to deal in the Software without 23 * restriction, including without limitation the rights to use 24 * copy, modify, merge, publish, distribute, sublicense, and/or 25 * sell copies of the Software, and to permit persons to whom the 26 * Software is furnished to do so, subject to the following 27 * conditions: 28 * 29 * The above copyright notice and this permission notice shall be 30 * included in all copies or substantial portions of the Software. 31 * 32 * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND 33 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES 34 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND 35 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT 36 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY 37 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING 38 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR 39 * OTHER DEALINGS IN THE SOFTWARE. 40 */ 41 42#include "vf610-pinfunc.h" 43#include <dt-bindings/clock/vf610-clock.h> 44#include <dt-bindings/interrupt-controller/irq.h> 45#include <dt-bindings/gpio/gpio.h> 46 47/ { 48 aliases { 49 can0 = &can0; 50 can1 = &can1; 51 ethernet0 = &fec0; 52 ethernet1 = &fec1; 53 serial0 = &uart0; 54 serial1 = &uart1; 55 serial2 = &uart2; 56 serial3 = &uart3; 57 serial4 = &uart4; 58 serial5 = &uart5; 59 gpio0 = &gpio0; 60 gpio1 = &gpio1; 61 gpio2 = &gpio2; 62 gpio3 = &gpio3; 63 gpio4 = &gpio4; 64 usbphy0 = &usbphy0; 65 usbphy1 = &usbphy1; 66 }; 67 68 fxosc: fxosc { 69 compatible = "fixed-clock"; 70 #clock-cells = <0>; 71 clock-frequency = <24000000>; 72 }; 73 74 sxosc: sxosc { 75 compatible = "fixed-clock"; 76 #clock-cells = <0>; 77 clock-frequency = <32768>; 78 }; 79 80 reboot: syscon-reboot { 81 compatible = "syscon-reboot"; 82 regmap = <&src>; 83 offset = <0x0>; 84 mask = <0x1000>; 85 }; 86 87 soc { 88 #address-cells = <1>; 89 #size-cells = <1>; 90 compatible = "simple-bus"; 91 interrupt-parent = <&mscm_ir>; 92 ranges; 93 94 aips0: aips-bus@40000000 { 95 compatible = "fsl,aips-bus", "simple-bus"; 96 #address-cells = <1>; 97 #size-cells = <1>; 98 reg = <0x40000000 0x00070000>; 99 ranges; 100 101 mscm_cpucfg: cpucfg@40001000 { 102 compatible = "fsl,vf610-mscm-cpucfg", "syscon"; 103 reg = <0x40001000 0x800>; 104 }; 105 106 mscm_ir: interrupt-controller@40001800 { 107 compatible = "fsl,vf610-mscm-ir"; 108 reg = <0x40001800 0x400>; 109 fsl,cpucfg = <&mscm_cpucfg>; 110 interrupt-controller; 111 #interrupt-cells = <2>; 112 }; 113 114 edma0: dma-controller@40018000 { 115 #dma-cells = <2>; 116 compatible = "fsl,vf610-edma"; 117 reg = <0x40018000 0x2000>, 118 <0x40024000 0x1000>, 119 <0x40025000 0x1000>; 120 dma-channels = <32>; 121 interrupts = <8 IRQ_TYPE_LEVEL_HIGH>, 122 <9 IRQ_TYPE_LEVEL_HIGH>; 123 interrupt-names = "edma-tx", "edma-err"; 124 clock-names = "dmamux0", "dmamux1"; 125 clocks = <&clks VF610_CLK_DMAMUX0>, 126 <&clks VF610_CLK_DMAMUX1>; 127 status = "disabled"; 128 }; 129 130 can0: flexcan@40020000 { 131 compatible = "fsl,vf610-flexcan"; 132 reg = <0x40020000 0x4000>; 133 interrupts = <58 IRQ_TYPE_LEVEL_HIGH>; 134 clocks = <&clks VF610_CLK_FLEXCAN0>, 135 <&clks VF610_CLK_FLEXCAN0>; 136 clock-names = "ipg", "per"; 137 status = "disabled"; 138 }; 139 140 uart0: serial@40027000 { 141 compatible = "fsl,vf610-lpuart"; 142 reg = <0x40027000 0x1000>; 143 interrupts = <61 IRQ_TYPE_LEVEL_HIGH>; 144 clocks = <&clks VF610_CLK_UART0>; 145 clock-names = "ipg"; 146 dmas = <&edma0 0 2>, 147 <&edma0 0 3>; 148 dma-names = "rx","tx"; 149 status = "disabled"; 150 }; 151 152 uart1: serial@40028000 { 153 compatible = "fsl,vf610-lpuart"; 154 reg = <0x40028000 0x1000>; 155 interrupts = <62 IRQ_TYPE_LEVEL_HIGH>; 156 clocks = <&clks VF610_CLK_UART1>; 157 clock-names = "ipg"; 158 dmas = <&edma0 0 4>, 159 <&edma0 0 5>; 160 dma-names = "rx","tx"; 161 status = "disabled"; 162 }; 163 164 uart2: serial@40029000 { 165 compatible = "fsl,vf610-lpuart"; 166 reg = <0x40029000 0x1000>; 167 interrupts = <63 IRQ_TYPE_LEVEL_HIGH>; 168 clocks = <&clks VF610_CLK_UART2>; 169 clock-names = "ipg"; 170 dmas = <&edma0 0 6>, 171 <&edma0 0 7>; 172 dma-names = "rx","tx"; 173 status = "disabled"; 174 }; 175 176 uart3: serial@4002a000 { 177 compatible = "fsl,vf610-lpuart"; 178 reg = <0x4002a000 0x1000>; 179 interrupts = <64 IRQ_TYPE_LEVEL_HIGH>; 180 clocks = <&clks VF610_CLK_UART3>; 181 clock-names = "ipg"; 182 dmas = <&edma0 0 8>, 183 <&edma0 0 9>; 184 dma-names = "rx","tx"; 185 status = "disabled"; 186 }; 187 188 dspi0: dspi0@4002c000 { 189 #address-cells = <1>; 190 #size-cells = <0>; 191 compatible = "fsl,vf610-dspi"; 192 reg = <0x4002c000 0x1000>; 193 interrupts = <67 IRQ_TYPE_LEVEL_HIGH>; 194 clocks = <&clks VF610_CLK_DSPI0>; 195 clock-names = "dspi"; 196 spi-num-chipselects = <6>; 197 status = "disabled"; 198 }; 199 200 dspi1: dspi1@4002d000 { 201 #address-cells = <1>; 202 #size-cells = <0>; 203 compatible = "fsl,vf610-dspi"; 204 reg = <0x4002d000 0x1000>; 205 interrupts = <68 IRQ_TYPE_LEVEL_HIGH>; 206 clocks = <&clks VF610_CLK_DSPI1>; 207 clock-names = "dspi"; 208 spi-num-chipselects = <4>; 209 status = "disabled"; 210 }; 211 212 sai0: sai@4002f000 { 213 compatible = "fsl,vf610-sai"; 214 reg = <0x4002f000 0x1000>; 215 interrupts = <84 IRQ_TYPE_LEVEL_HIGH>; 216 clocks = <&clks VF610_CLK_SAI0>, 217 <&clks VF610_CLK_SAI0_DIV>, 218 <&clks 0>, <&clks 0>; 219 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 220 dma-names = "tx", "rx"; 221 dmas = <&edma0 0 17>, 222 <&edma0 0 16>; 223 status = "disabled"; 224 }; 225 226 sai1: sai@40030000 { 227 compatible = "fsl,vf610-sai"; 228 reg = <0x40030000 0x1000>; 229 interrupts = <85 IRQ_TYPE_LEVEL_HIGH>; 230 clocks = <&clks VF610_CLK_SAI1>, 231 <&clks VF610_CLK_SAI1_DIV>, 232 <&clks 0>, <&clks 0>; 233 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 234 dma-names = "tx", "rx"; 235 dmas = <&edma0 0 19>, 236 <&edma0 0 18>; 237 status = "disabled"; 238 }; 239 240 sai2: sai@40031000 { 241 compatible = "fsl,vf610-sai"; 242 reg = <0x40031000 0x1000>; 243 interrupts = <86 IRQ_TYPE_LEVEL_HIGH>; 244 clocks = <&clks VF610_CLK_SAI2>, 245 <&clks VF610_CLK_SAI2_DIV>, 246 <&clks 0>, <&clks 0>; 247 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 248 dma-names = "tx", "rx"; 249 dmas = <&edma0 0 21>, 250 <&edma0 0 20>; 251 status = "disabled"; 252 }; 253 254 sai3: sai@40032000 { 255 compatible = "fsl,vf610-sai"; 256 reg = <0x40032000 0x1000>; 257 interrupts = <87 IRQ_TYPE_LEVEL_HIGH>; 258 clocks = <&clks VF610_CLK_SAI3>, 259 <&clks VF610_CLK_SAI3_DIV>, 260 <&clks 0>, <&clks 0>; 261 clock-names = "bus", "mclk1", "mclk2", "mclk3"; 262 dma-names = "tx", "rx"; 263 dmas = <&edma0 1 9>, 264 <&edma0 1 8>; 265 status = "disabled"; 266 }; 267 268 pit: pit@40037000 { 269 compatible = "fsl,vf610-pit"; 270 reg = <0x40037000 0x1000>; 271 interrupts = <39 IRQ_TYPE_LEVEL_HIGH>; 272 clocks = <&clks VF610_CLK_PIT>; 273 clock-names = "pit"; 274 }; 275 276 pwm0: pwm@40038000 { 277 compatible = "fsl,vf610-ftm-pwm"; 278 #pwm-cells = <3>; 279 reg = <0x40038000 0x1000>; 280 clock-names = "ftm_sys", "ftm_ext", 281 "ftm_fix", "ftm_cnt_clk_en"; 282 clocks = <&clks VF610_CLK_FTM0>, 283 <&clks VF610_CLK_FTM0_EXT_SEL>, 284 <&clks VF610_CLK_FTM0_FIX_SEL>, 285 <&clks VF610_CLK_FTM0_EXT_FIX_EN>; 286 status = "disabled"; 287 }; 288 289 pwm1: pwm@40039000 { 290 compatible = "fsl,vf610-ftm-pwm"; 291 #pwm-cells = <3>; 292 reg = <0x40039000 0x1000>; 293 clock-names = "ftm_sys", "ftm_ext", 294 "ftm_fix", "ftm_cnt_clk_en"; 295 clocks = <&clks VF610_CLK_FTM1>, 296 <&clks VF610_CLK_FTM1_EXT_SEL>, 297 <&clks VF610_CLK_FTM1_FIX_SEL>, 298 <&clks VF610_CLK_FTM1_EXT_FIX_EN>; 299 status = "disabled"; 300 }; 301 302 adc0: adc@4003b000 { 303 compatible = "fsl,vf610-adc"; 304 reg = <0x4003b000 0x1000>; 305 interrupts = <53 IRQ_TYPE_LEVEL_HIGH>; 306 clocks = <&clks VF610_CLK_ADC0>; 307 clock-names = "adc"; 308 #io-channel-cells = <1>; 309 status = "disabled"; 310 fsl,adck-max-frequency = <30000000>, <40000000>, 311 <20000000>; 312 }; 313 314 tcon0: timing-controller@4003d000 { 315 compatible = "fsl,vf610-tcon"; 316 reg = <0x4003d000 0x1000>; 317 clocks = <&clks VF610_CLK_TCON0>; 318 clock-names = "ipg"; 319 status = "disabled"; 320 }; 321 322 wdoga5: wdog@4003e000 { 323 compatible = "fsl,vf610-wdt", "fsl,imx21-wdt"; 324 reg = <0x4003e000 0x1000>; 325 interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; 326 clocks = <&clks VF610_CLK_WDT>; 327 clock-names = "wdog"; 328 status = "disabled"; 329 }; 330 331 qspi0: quadspi@40044000 { 332 #address-cells = <1>; 333 #size-cells = <0>; 334 compatible = "fsl,vf610-qspi"; 335 reg = <0x40044000 0x1000>, <0x20000000 0x10000000>; 336 reg-names = "QuadSPI", "QuadSPI-memory"; 337 interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; 338 clocks = <&clks VF610_CLK_QSPI0_EN>, 339 <&clks VF610_CLK_QSPI0>; 340 clock-names = "qspi_en", "qspi"; 341 status = "disabled"; 342 }; 343 344 iomuxc: iomuxc@40048000 { 345 compatible = "fsl,vf610-iomuxc"; 346 reg = <0x40048000 0x1000>; 347 }; 348 349 gpio0: gpio@40049000 { 350 compatible = "fsl,vf610-gpio"; 351 reg = <0x40049000 0x1000 0x400ff000 0x40>; 352 gpio-controller; 353 #gpio-cells = <2>; 354 interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; 355 interrupt-controller; 356 #interrupt-cells = <2>; 357 gpio-ranges = <&iomuxc 0 0 32>; 358 }; 359 360 gpio1: gpio@4004a000 { 361 compatible = "fsl,vf610-gpio"; 362 reg = <0x4004a000 0x1000 0x400ff040 0x40>; 363 gpio-controller; 364 #gpio-cells = <2>; 365 interrupts = <108 IRQ_TYPE_LEVEL_HIGH>; 366 interrupt-controller; 367 #interrupt-cells = <2>; 368 gpio-ranges = <&iomuxc 0 32 32>; 369 }; 370 371 gpio2: gpio@4004b000 { 372 compatible = "fsl,vf610-gpio"; 373 reg = <0x4004b000 0x1000 0x400ff080 0x40>; 374 gpio-controller; 375 #gpio-cells = <2>; 376 interrupts = <109 IRQ_TYPE_LEVEL_HIGH>; 377 interrupt-controller; 378 #interrupt-cells = <2>; 379 gpio-ranges = <&iomuxc 0 64 32>; 380 }; 381 382 gpio3: gpio@4004c000 { 383 compatible = "fsl,vf610-gpio"; 384 reg = <0x4004c000 0x1000 0x400ff0c0 0x40>; 385 gpio-controller; 386 #gpio-cells = <2>; 387 interrupts = <110 IRQ_TYPE_LEVEL_HIGH>; 388 interrupt-controller; 389 #interrupt-cells = <2>; 390 gpio-ranges = <&iomuxc 0 96 32>; 391 }; 392 393 gpio4: gpio@4004d000 { 394 compatible = "fsl,vf610-gpio"; 395 reg = <0x4004d000 0x1000 0x400ff100 0x40>; 396 gpio-controller; 397 #gpio-cells = <2>; 398 interrupts = <111 IRQ_TYPE_LEVEL_HIGH>; 399 interrupt-controller; 400 #interrupt-cells = <2>; 401 gpio-ranges = <&iomuxc 0 128 7>; 402 }; 403 404 anatop: anatop@40050000 { 405 compatible = "fsl,vf610-anatop", "syscon"; 406 reg = <0x40050000 0x400>; 407 }; 408 409 usbphy0: usbphy@40050800 { 410 compatible = "fsl,vf610-usbphy"; 411 reg = <0x40050800 0x400>; 412 interrupts = <50 IRQ_TYPE_LEVEL_HIGH>; 413 clocks = <&clks VF610_CLK_USBPHY0>; 414 fsl,anatop = <&anatop>; 415 status = "disabled"; 416 }; 417 418 usbphy1: usbphy@40050c00 { 419 compatible = "fsl,vf610-usbphy"; 420 reg = <0x40050c00 0x400>; 421 interrupts = <51 IRQ_TYPE_LEVEL_HIGH>; 422 clocks = <&clks VF610_CLK_USBPHY1>; 423 fsl,anatop = <&anatop>; 424 status = "disabled"; 425 }; 426 427 dcu0: dcu@40058000 { 428 compatible = "fsl,vf610-dcu"; 429 reg = <0x40058000 0x1200>; 430 interrupts = <30 IRQ_TYPE_LEVEL_HIGH>; 431 clocks = <&clks VF610_CLK_DCU0>, 432 <&clks VF610_CLK_DCU0_DIV>; 433 clock-names = "dcu", "pix"; 434 fsl,tcon = <&tcon0>; 435 status = "disabled"; 436 }; 437 438 i2c0: i2c@40066000 { 439 #address-cells = <1>; 440 #size-cells = <0>; 441 compatible = "fsl,vf610-i2c"; 442 reg = <0x40066000 0x1000>; 443 interrupts = <71 IRQ_TYPE_LEVEL_HIGH>; 444 clocks = <&clks VF610_CLK_I2C0>; 445 clock-names = "ipg"; 446 dmas = <&edma0 0 50>, 447 <&edma0 0 51>; 448 dma-names = "rx","tx"; 449 status = "disabled"; 450 }; 451 452 i2c1: i2c@40067000 { 453 #address-cells = <1>; 454 #size-cells = <0>; 455 compatible = "fsl,vf610-i2c"; 456 reg = <0x40067000 0x1000>; 457 interrupts = <72 IRQ_TYPE_LEVEL_HIGH>; 458 clocks = <&clks VF610_CLK_I2C1>; 459 clock-names = "ipg"; 460 dmas = <&edma0 0 52>, 461 <&edma0 0 53>; 462 dma-names = "rx","tx"; 463 status = "disabled"; 464 }; 465 466 clks: ccm@4006b000 { 467 compatible = "fsl,vf610-ccm"; 468 reg = <0x4006b000 0x1000>; 469 clocks = <&sxosc>, <&fxosc>; 470 clock-names = "sxosc", "fxosc"; 471 #clock-cells = <1>; 472 }; 473 474 usbdev0: usb@40034000 { 475 compatible = "fsl,vf610-usb", "fsl,imx27-usb"; 476 reg = <0x40034000 0x800>; 477 interrupts = <75 IRQ_TYPE_LEVEL_HIGH>; 478 clocks = <&clks VF610_CLK_USBC0>; 479 fsl,usbphy = <&usbphy0>; 480 fsl,usbmisc = <&usbmisc0 0>; 481 dr_mode = "peripheral"; 482 status = "disabled"; 483 }; 484 485 usbmisc0: usb@40034800 { 486 #index-cells = <1>; 487 compatible = "fsl,vf610-usbmisc"; 488 reg = <0x40034800 0x200>; 489 clocks = <&clks VF610_CLK_USBC0>; 490 status = "disabled"; 491 }; 492 493 src: src@4006e000 { 494 compatible = "fsl,vf610-src", "syscon"; 495 reg = <0x4006e000 0x1000>; 496 interrupts = <96 IRQ_TYPE_LEVEL_HIGH>; 497 }; 498 }; 499 500 aips1: aips-bus@40080000 { 501 compatible = "fsl,aips-bus", "simple-bus"; 502 #address-cells = <1>; 503 #size-cells = <1>; 504 reg = <0x40080000 0x0007f000>; 505 ranges; 506 507 edma1: dma-controller@40098000 { 508 #dma-cells = <2>; 509 compatible = "fsl,vf610-edma"; 510 reg = <0x40098000 0x2000>, 511 <0x400a1000 0x1000>, 512 <0x400a2000 0x1000>; 513 dma-channels = <32>; 514 interrupts = <10 IRQ_TYPE_LEVEL_HIGH>, 515 <11 IRQ_TYPE_LEVEL_HIGH>; 516 interrupt-names = "edma-tx", "edma-err"; 517 clock-names = "dmamux0", "dmamux1"; 518 clocks = <&clks VF610_CLK_DMAMUX2>, 519 <&clks VF610_CLK_DMAMUX3>; 520 status = "disabled"; 521 }; 522 523 snvs0: snvs@400a7000 { 524 compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; 525 reg = <0x400a7000 0x2000>; 526 527 snvsrtc: snvs-rtc-lp { 528 compatible = "fsl,sec-v4.0-mon-rtc-lp"; 529 regmap = <&snvs0>; 530 offset = <0x34>; 531 interrupts = <100 IRQ_TYPE_LEVEL_HIGH>; 532 clocks = <&clks VF610_CLK_SNVS>; 533 clock-names = "snvs-rtc"; 534 }; 535 }; 536 537 uart4: serial@400a9000 { 538 compatible = "fsl,vf610-lpuart"; 539 reg = <0x400a9000 0x1000>; 540 interrupts = <65 IRQ_TYPE_LEVEL_HIGH>; 541 clocks = <&clks VF610_CLK_UART4>; 542 clock-names = "ipg"; 543 status = "disabled"; 544 }; 545 546 uart5: serial@400aa000 { 547 compatible = "fsl,vf610-lpuart"; 548 reg = <0x400aa000 0x1000>; 549 interrupts = <66 IRQ_TYPE_LEVEL_HIGH>; 550 clocks = <&clks VF610_CLK_UART5>; 551 clock-names = "ipg"; 552 status = "disabled"; 553 }; 554 555 dspi2: dspi2@400ac000 { 556 #address-cells = <1>; 557 #size-cells = <0>; 558 compatible = "fsl,vf610-dspi"; 559 reg = <0x400ac000 0x1000>; 560 interrupts = <69 IRQ_TYPE_LEVEL_HIGH>; 561 clocks = <&clks VF610_CLK_DSPI2>; 562 clock-names = "dspi"; 563 spi-num-chipselects = <2>; 564 status = "disabled"; 565 }; 566 567 dspi3: dspi3@400ad000 { 568 #address-cells = <1>; 569 #size-cells = <0>; 570 compatible = "fsl,vf610-dspi"; 571 reg = <0x400ad000 0x1000>; 572 interrupts = <70 IRQ_TYPE_LEVEL_HIGH>; 573 clocks = <&clks VF610_CLK_DSPI3>; 574 clock-names = "dspi"; 575 spi-num-chipselects = <2>; 576 status = "disabled"; 577 }; 578 579 adc1: adc@400bb000 { 580 compatible = "fsl,vf610-adc"; 581 reg = <0x400bb000 0x1000>; 582 interrupts = <54 IRQ_TYPE_LEVEL_HIGH>; 583 clocks = <&clks VF610_CLK_ADC1>; 584 clock-names = "adc"; 585 #io-channel-cells = <1>; 586 status = "disabled"; 587 fsl,adck-max-frequency = <30000000>, <40000000>, 588 <20000000>; 589 }; 590 591 esdhc0: esdhc@400b1000 { 592 compatible = "fsl,imx53-esdhc"; 593 reg = <0x400b1000 0x1000>; 594 interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; 595 clocks = <&clks VF610_CLK_IPG_BUS>, 596 <&clks VF610_CLK_PLATFORM_BUS>, 597 <&clks VF610_CLK_ESDHC0>; 598 clock-names = "ipg", "ahb", "per"; 599 status = "disabled"; 600 }; 601 602 esdhc1: esdhc@400b2000 { 603 compatible = "fsl,imx53-esdhc"; 604 reg = <0x400b2000 0x1000>; 605 interrupts = <28 IRQ_TYPE_LEVEL_HIGH>; 606 clocks = <&clks VF610_CLK_IPG_BUS>, 607 <&clks VF610_CLK_PLATFORM_BUS>, 608 <&clks VF610_CLK_ESDHC1>; 609 clock-names = "ipg", "ahb", "per"; 610 status = "disabled"; 611 }; 612 613 usbh1: usb@400b4000 { 614 compatible = "fsl,vf610-usb", "fsl,imx27-usb"; 615 reg = <0x400b4000 0x800>; 616 interrupts = <76 IRQ_TYPE_LEVEL_HIGH>; 617 clocks = <&clks VF610_CLK_USBC1>; 618 fsl,usbphy = <&usbphy1>; 619 fsl,usbmisc = <&usbmisc1 0>; 620 dr_mode = "host"; 621 status = "disabled"; 622 }; 623 624 usbmisc1: usb@400b4800 { 625 #index-cells = <1>; 626 compatible = "fsl,vf610-usbmisc"; 627 reg = <0x400b4800 0x200>; 628 clocks = <&clks VF610_CLK_USBC1>; 629 status = "disabled"; 630 }; 631 632 ftm: ftm@400b8000 { 633 compatible = "fsl,ftm-timer"; 634 reg = <0x400b8000 0x1000 0x400b9000 0x1000>; 635 interrupts = <44 IRQ_TYPE_LEVEL_HIGH>; 636 clock-names = "ftm-evt", "ftm-src", 637 "ftm-evt-counter-en", "ftm-src-counter-en"; 638 clocks = <&clks VF610_CLK_FTM2>, 639 <&clks VF610_CLK_FTM3>, 640 <&clks VF610_CLK_FTM2_EXT_FIX_EN>, 641 <&clks VF610_CLK_FTM3_EXT_FIX_EN>; 642 status = "disabled"; 643 }; 644 645 qspi1: quadspi@400c4000 { 646 #address-cells = <1>; 647 #size-cells = <0>; 648 compatible = "fsl,vf610-qspi"; 649 reg = <0x400c4000 0x1000>, <0x50000000 0x10000000>; 650 reg-names = "QuadSPI", "QuadSPI-memory"; 651 interrupts = <25 IRQ_TYPE_LEVEL_HIGH>; 652 clocks = <&clks VF610_CLK_QSPI1_EN>, 653 <&clks VF610_CLK_QSPI1>; 654 clock-names = "qspi_en", "qspi"; 655 status = "disabled"; 656 }; 657 658 dac0: dac@400cc000 { 659 compatible = "fsl,vf610-dac"; 660 reg = <0x400cc000 1000>; 661 interrupts = <55 IRQ_TYPE_LEVEL_HIGH>; 662 clock-names = "dac"; 663 clocks = <&clks VF610_CLK_DAC0>; 664 status = "disabled"; 665 }; 666 667 dac1: dac@400cd000 { 668 compatible = "fsl,vf610-dac"; 669 reg = <0x400cd000 1000>; 670 interrupts = <56 IRQ_TYPE_LEVEL_HIGH>; 671 clock-names = "dac"; 672 clocks = <&clks VF610_CLK_DAC1>; 673 status = "disabled"; 674 }; 675 676 fec0: ethernet@400d0000 { 677 compatible = "fsl,mvf600-fec"; 678 reg = <0x400d0000 0x1000>; 679 interrupts = <78 IRQ_TYPE_LEVEL_HIGH>; 680 clocks = <&clks VF610_CLK_ENET0>, 681 <&clks VF610_CLK_ENET0>, 682 <&clks VF610_CLK_ENET>; 683 clock-names = "ipg", "ahb", "ptp"; 684 status = "disabled"; 685 }; 686 687 fec1: ethernet@400d1000 { 688 compatible = "fsl,mvf600-fec"; 689 reg = <0x400d1000 0x1000>; 690 interrupts = <79 IRQ_TYPE_LEVEL_HIGH>; 691 clocks = <&clks VF610_CLK_ENET1>, 692 <&clks VF610_CLK_ENET1>, 693 <&clks VF610_CLK_ENET>; 694 clock-names = "ipg", "ahb", "ptp"; 695 status = "disabled"; 696 }; 697 698 can1: flexcan@400d4000 { 699 compatible = "fsl,vf610-flexcan"; 700 reg = <0x400d4000 0x4000>; 701 interrupts = <59 IRQ_TYPE_LEVEL_HIGH>; 702 clocks = <&clks VF610_CLK_FLEXCAN1>, 703 <&clks VF610_CLK_FLEXCAN1>; 704 clock-names = "ipg", "per"; 705 status = "disabled"; 706 }; 707 708 nfc: nand@400e0000 { 709 #address-cells = <1>; 710 #size-cells = <0>; 711 compatible = "fsl,vf610-nfc"; 712 reg = <0x400e0000 0x4000>; 713 interrupts = <83 IRQ_TYPE_LEVEL_HIGH>; 714 clocks = <&clks VF610_CLK_NFC>; 715 clock-names = "nfc"; 716 status = "disabled"; 717 }; 718 719 i2c2: i2c@400e6000 { 720 #address-cells = <1>; 721 #size-cells = <0>; 722 compatible = "fsl,vf610-i2c"; 723 reg = <0x400e6000 0x1000>; 724 interrupts = <73 IRQ_TYPE_LEVEL_HIGH>; 725 clocks = <&clks VF610_CLK_I2C2>; 726 clock-names = "ipg"; 727 dmas = <&edma0 1 36>, 728 <&edma0 1 37>; 729 dma-names = "rx","tx"; 730 status = "disabled"; 731 }; 732 733 i2c3: i2c@400e7000 { 734 #address-cells = <1>; 735 #size-cells = <0>; 736 compatible = "fsl,vf610-i2c"; 737 reg = <0x400e7000 0x1000>; 738 interrupts = <74 IRQ_TYPE_LEVEL_HIGH>; 739 clocks = <&clks VF610_CLK_I2C3>; 740 clock-names = "ipg"; 741 dmas = <&edma0 1 38>, 742 <&edma0 1 39>; 743 dma-names = "rx","tx"; 744 status = "disabled"; 745 }; 746 }; 747 748 iio-hwmon { 749 compatible = "iio-hwmon"; 750 io-channels = <&adc0 16>, <&adc1 16>; 751 }; 752 }; 753}; 754